One-Pot Printing of Robust Multimaterial Devices
Authors:
Sijia Huang,
Steven Adelmund,
Pradip S. Pichumani,
Johanna J. Schwartz,
Yigit Menguc,
Maxim Shusteff,
Thomas J. Wallin
Abstract:
Polymer 3D printing is a broad set of manufacturing methods that permit the fabrication of complex architectures, and, as a result, numerous efforts focus on formulating processible chemistries that produce desirable material behavior in printed parts. However, current resin chemistries typically result in a single fixed set of properties once fully polymerized, a fact that poses significant engin…
▽ More
Polymer 3D printing is a broad set of manufacturing methods that permit the fabrication of complex architectures, and, as a result, numerous efforts focus on formulating processible chemistries that produce desirable material behavior in printed parts. However, current resin chemistries typically result in a single fixed set of properties once fully polymerized, a fact that poses significant engineering challenges to obtaining multimaterial devices. As an alternative to single-property materials, we introduce a ternary sequential reaction scheme that exhibits diverse multimaterial properties by profoundly altering the polymer microstructure from within a single resin composition. In this system, the photodosage during 3D printing sets both the shape and extent of conversion for each subsequent reaction. This different polymerization mechanisms of the subsequent stages yield disparate crosslink densities and viscoelastic properties. As a result, our materials possess Young's Moduli spanning over three orders of magnitude (400 kPa < E < 1.6 GPa) with smooth transitions between soft and stiff regions. We successfully pattern a 500x change in modulus in under a millimeter while the sequential assembly of our polymer networks ensures robust interfaces and enhances toughness by 10x compared to the single property materials. Most importantly, the final objects remain stable to UV and thermal aging, a key limitation to applications of previous multimaterial chemistries. We demonstrate the ability to 3D print intricate multimaterial architectures by fabricating a soft, wearable braille display.
△ Less
Submitted 30 September, 2022; v1 submitted 20 November, 2021;
originally announced November 2021.
A tuned mass amplifier for enhanced haptic feedback
Authors:
Sai Sharan Injeti,
Ali Israr,
Tianshu Liu,
Yiğit Mengüç,
Daniele Piazza,
Dongsuk D. Shin
Abstract:
Vibro-tactile feedback is, by far the most common haptic interface in wearable or touchable devices. This feedback can be amplified by controlling the wave propagation characteristics in devices, by utilizing phenomena such as structural resonance. However, much of the work in vibro-tactile haptics has focused on amplifying local displacements in a structure by increasing local compliance. In this…
▽ More
Vibro-tactile feedback is, by far the most common haptic interface in wearable or touchable devices. This feedback can be amplified by controlling the wave propagation characteristics in devices, by utilizing phenomena such as structural resonance. However, much of the work in vibro-tactile haptics has focused on amplifying local displacements in a structure by increasing local compliance. In this paper, we show that engineering the resonance mode shape of a structure with embedded localized mass amplifies the displacements without compromising on the stiffness or resonance frequency. The resulting structure, i.e., a tuned mass amplifier, produces higher tactile forces (7.7 times) compared to its counterpart without a mass, while maintaining a low frequency. We optimize the proposed design using a combination of a neural network and sensitivity analysis, and validate the results with experiments on 3-D printed structures. We also study the performance of the device on contact with a soft material, to evaluate the interaction with skin. Potential avenues for future work are also presented, including small form factor wearable haptic devices and remote haptics.
△ Less
Submitted 27 January, 2021; v1 submitted 27 January, 2021;
originally announced January 2021.
