Showing 1–43 of 43 results for author: Meng, Y S

Preservation of Topological Surface States in Millimeter-Scale Transferred Membranes

Authors: Chi Ian Jess Ip, Qiang Gao, Khanhy Du Nguyen, Chenhui Yan, Gangbin Yan, Eli Hoenig, Thomas S. Marchese, Minghao Zhang, Woojoo Lee, Hossein Rokni, Ying Shirley Meng, Chong Liu, Shuolong Yang

Abstract: Ultrathin topological insulator membranes are building blocks of exotic quantum matter. However, traditional epitaxy of these materials does not facilitate stacking in arbitrary orders, while mechanical exfoliation from bulk crystals is also challenging due to the non-negligible interlayer coupling therein. Here we liberate millimeter-scale films of topological insulator Bi$_2$Se$_3$, grown by mol… ▽ More Ultrathin topological insulator membranes are building blocks of exotic quantum matter. However, traditional epitaxy of these materials does not facilitate stacking in arbitrary orders, while mechanical exfoliation from bulk crystals is also challenging due to the non-negligible interlayer coupling therein. Here we liberate millimeter-scale films of topological insulator Bi$_2$Se$_3$, grown by molecular beam epitaxy, down to 3 quintuple layers. We characterize the preservation of the topological surface states and quantum well states in transferred Bi$_{2}$Se$_{3}$ films using angle-resolved photoemission spectroscopy. Leveraging the photon-energy-dependent surface sensitivity, the photoemission spectra taken with $6$ eV and $21.2$ eV photons reveal a transfer-induced migration of the topological surface states from the top to the inner layers. By establishing clear electronic structures of the transferred films and unveiling the wavefunction relocation of the topological surface states, our work paves the physics foundation crucial for the future fabrication of artificially stacked topological materials with single-layer precision. △ Less

Submitted 21 May, 2024; originally announced May 2024.

Comments: 4 figures

Journal ref: Nano Letters 2024

Operando real-space imaging of a structural phase transformation in a high-voltage electrode

Authors: Yifei Sun, Sunny Hy, Nelson Hua, James Wingert, Ross Harder, Ying Shirley Meng, Oleg Shpyrko, Andrej Singer

Abstract: Discontinuous solid-solid phase transformations play a pivotal role in determining properties of rechargeable battery electrodes. By leveraging operando Bragg Coherent Diffractive Imaging (BCDI), we investigate the discontinuous phase transformation in LixNi0.5Mn1.5O4 within a fully operational battery. Throughout Li-intercalation, we directly observe the nucleation and growth of the Li-rich phase… ▽ More Discontinuous solid-solid phase transformations play a pivotal role in determining properties of rechargeable battery electrodes. By leveraging operando Bragg Coherent Diffractive Imaging (BCDI), we investigate the discontinuous phase transformation in LixNi0.5Mn1.5O4 within a fully operational battery. Throughout Li-intercalation, we directly observe the nucleation and growth of the Li-rich phase within the initially charged Li-poor phase in a 500 nm particle. Supported by the microelasticity model, the operando imaging unveils an evolution from a curved coherent to planar semi-coherent interface driven by dislocation dynamics. We hypothesize these dislocations exhibit a glissile motion that facilitates interface migration without diffusion of host ions, leaving the particle defect-free post-transformation. Our data indicates negligible kinetic limitations impacting the transformation kinetics, even at discharge rates as fast as C/2. This study underscores BCDI's capability to provide operando insights into nanoscale phase transformations, offering valuable guidance for electrochemical materials design and optimization. △ Less

Submitted 19 December, 2023; originally announced December 2023.

Elucidating Dynamic Conductive State Changes in Amorphous Lithium Lanthanum Titanate for Resistive Switching Devices

Authors: Ryosuke Shimizu, Diyi Cheng, Guomin Zhu, Bing Han, Thomas S. Marchese, Randall Burger, Mingjie Xu, Xiaoqing Pan, Minghao Zhang, Ying Shirley Meng

Abstract: Exploration of novel resistive switching materials attracts attention to replace conventional Si-based transistors and to achieve neuromorphic computing that can surpass the limit of the current Von-Neumann computing for the time of Internet of Things (IoT). Materials priorly used to serve in batteries have demonstrated metal-insulator transitions upon an electrical biasing due to resulting compos… ▽ More Exploration of novel resistive switching materials attracts attention to replace conventional Si-based transistors and to achieve neuromorphic computing that can surpass the limit of the current Von-Neumann computing for the time of Internet of Things (IoT). Materials priorly used to serve in batteries have demonstrated metal-insulator transitions upon an electrical biasing due to resulting compositional change. This property is desirable for future resistive switching devices. Amorphous lithium lanthanum titanate (a-LLTO) was originally developed as a solid-state electrolyte with relatively high lithium ionic conductivity and low electronic conductivity among oxide-type solid electrolytes. However, it has been suggested that electric conductivity of a-LLTO changes depending on oxygen content. In this work, the investigation of switching behavior of a-LLTO was conducted by employing a range of voltage sweep techniques, ultimately establishing a stable and optimal operating condition within the voltage window of -3.5 V to 3.5 V. This voltage range effectively balances the desirable trait of a substantial resistance change by three orders of magnitude with the imperative avoidance of LLTO decomposition. This switching behavior is also confirmed at nanodevice of Ni/LLTO/Ni through in-situ biasing inside focused-ion beam/scanning electron microscope (FIB-SEM). Experiment and computation with different LLTO composition shows that LLTO has two distinct conductivity states due to Ti reduction. The distribution of these two states is discussed using simplified binary model, implying the conductive filament growth during low resistance state. Consequently, our study deepens understanding of LLTO electronic properties and encourages the interdisciplinary application of battery materials for resistive switching devices. △ Less

Submitted 30 September, 2023; originally announced October 2023.

Quantitative Analysis of Sodium Metal Deposition and Interphase in Na Metal Batteries

Authors: Baharak Sayahpour, Weikang Li, Shuang Bai, Bingyu Lu, Bing Han, Yu-Ting Chen, Grayson Deysher, Saurabh Parab, Phillip Ridley, Ganesh Raghavendran, Long Hoang Bao Nguyen, Minghao Zhang, Ying Shirley Meng

Abstract: Sodium-ion batteries exhibit significant promise as a viable alternative to current lithium-ion technologies owing to their sustainability, low cost per energy density, reliability, and safety. Despite recent advancements in cathode materials for this category of energy storage systems, the primary challenge in realizing practical applications of sodium-ion systems is the absence of an anode syste… ▽ More Sodium-ion batteries exhibit significant promise as a viable alternative to current lithium-ion technologies owing to their sustainability, low cost per energy density, reliability, and safety. Despite recent advancements in cathode materials for this category of energy storage systems, the primary challenge in realizing practical applications of sodium-ion systems is the absence of an anode system with high energy density and durability. Although Na metal is the ultimate anode that can facilitate high-energy sodium-ion batteries, its use remains limited due to safety concerns and the high-capacity loss associated with the high reactivity of Na metal. In this study, titration gas chromatography is employed to accurately quantify the sodium inventory loss in ether- and carbonate-based electrolytes. Uniaxial pressure is developed as a powerful tool to control the deposition of sodium metal with dense morphology, thereby enabling high initial coulombic efficiencies. In ether-based electrolytes, the Na metal surface exhibits the presence of a uniform solid electrolyte interphase layer, primarily characterized by favorable inorganic chemical components with close-packed structures. The full cell, utilizing a controlled electroplated sodium metal in ether-based electrolyte, provides capacity retention of 91.84% after 500 cycles at 2C current rate and delivers 86 mAh/g discharge capacity at 45C current rate, suggesting the potential to enable Na metal in the next generation of sodium-ion technologies with specifications close to practical requirements. △ Less

Submitted 27 September, 2023; originally announced September 2023.

Thermo-mechanical level-set topology optimization of a load carrying battery pack for electric aircraft

Authors: Alexandre T. R. Guibert, Murtaza Bookwala, Ashley Cronk, Y. Shirley Meng, H. Alicia Kim

Abstract: A persistent challenge with the development of electric vertical take-off and landing vehicles (eVTOL) to meet flight power and energy demands is the mass of the load and thermal management systems for batteries. One possible strategy to overcome this problem is to employ optimization techniques to obtain a lightweight battery pack while satisfying structural and thermal requirements. In this work… ▽ More A persistent challenge with the development of electric vertical take-off and landing vehicles (eVTOL) to meet flight power and energy demands is the mass of the load and thermal management systems for batteries. One possible strategy to overcome this problem is to employ optimization techniques to obtain a lightweight battery pack while satisfying structural and thermal requirements. In this work, a structural battery pack with high-energy-density cylindrical cells is optimized using the level-set topology optimization method. The heat generated by the batteries is predicted using a high-fidelity electrochemical model for a given eVTOL flight profile. The worst-case scenario for the battery's heat generation is then considered as a source term in the weakly coupled steady-state thermomechanical finite element model used for optimization. The objective of the optimization problem is to minimize the weighted sum of thermal compliance and structural compliance subjected to a volume constraint. The methodology is demonstrated with numerical examples for different sets of weights. The optimized results due to different weights are compared, discussed, and evaluated with thermal and structural performance indicators. The optimized pack topologies are subjected to a transient thermal finite element analysis to assess the battery pack's thermal response. △ Less

Submitted 31 July, 2023; originally announced July 2023.

Comments: AeroBest 2023 II ECCOMAS Thematic Conference on Multidisciplinary Design Optimization of Aerospace Systems

MSC Class: 49M41 (Primary)

Recycling Silicon Scrap for Spherical Si-C composite as High-Performance Lithium-ion Battery Anodes

Authors: Bhagath Sreenarayanan, Marta Vicencio, Shuang Bai, Bingyu Lu, Ou Mao, Shiva Adireddy, Wurigumula Bao, Ying Shirley Meng

Abstract: The growth of the semiconductor and solar industry has been exponential in the last two decades due to the computing and energy demands of the world. Silicon (Si) is one of the main constituents for both sectors and, thus, is used in large quantities. As a result, a lot of Si waste is generated mainly by these two industries. For a sustainable world, the circular economy is the key; thus, the wast… ▽ More The growth of the semiconductor and solar industry has been exponential in the last two decades due to the computing and energy demands of the world. Silicon (Si) is one of the main constituents for both sectors and, thus, is used in large quantities. As a result, a lot of Si waste is generated mainly by these two industries. For a sustainable world, the circular economy is the key; thus, the waste produced must be upcycled/recycled/reused to complete the circular chain. Herein, we show that an upcycled/recycled Si can be used with carbon as a composite anode material, with high Si content (~40 wt.%) and loading of 3-4 mAh/cm^2 for practical use in lithium-ion batteries. The unique spherical jackfruit-like structure of the Si-C composite can minimize the total lithium inventory loss compared to the conventional Si-C composite and pure Si, resulting in superior electrochemical performance. The superior electrochemical performance of Si-C composites enables the cell energy density of ~325 Wh/kg (with NMC cathode) and ~260 Wh/kg (with LFP cathode), respectively. The results demonstrate that Si-based industrial waste can be upcycled for high-performance Li-ion battery anodes through a controllable, scalable, and energy-efficient route. △ Less

Submitted 17 May, 2023; originally announced May 2023.

Elucidating the Role of Prelithiation in Si-based Anodes for Interface Stabilization

Authors: Shuang Bai, Wurigumula Bao, Kun Qian, Bing Han, Weikang Li, Baharak Sayahpour, Bhagath Screenarayanan, Darren H. S. Tan, So-yeon Ham, Ying Shirley Meng

Abstract: Prelithiation as a facile and effective method to compensate the lithium inventory loss in the initial cycle has progressed considerably both on anode and cathode sides. However, much less research has been devoted to the prelithiation effect on the interface stabilization for long-term cycling of Si-based anodes. An in-depth quantitative analysis of the interface that form during the prelithiatio… ▽ More Prelithiation as a facile and effective method to compensate the lithium inventory loss in the initial cycle has progressed considerably both on anode and cathode sides. However, much less research has been devoted to the prelithiation effect on the interface stabilization for long-term cycling of Si-based anodes. An in-depth quantitative analysis of the interface that form during the prelithiation of SiO$_x$ is presented here and the results are compared with prelithiaton of Si anodes. Local structure probe combined with detailed electrochemical analysis reveals that a characteristic mosaic interface is formed on both prelithiated SiO$_x$ and Si anodes. This mosaic interface containing multiple lithium silicates phases, is fundamentally different from the solid electrolyte interface (SEI) formed without prelithiation. The ideal conductivity and mechanical properties of lithium silicates enable improved cycling stability of both prelithiated anodes. With a higher ratio of lithium silicates due to the oxygen participation, prelithiated SiO$_{1.3}$ anode improves the initial coulombic efficiency to 94% in full cell and delivers good cycling retention after hundreds cycles under lean electrolyte conditions. The insights provided in this work could be used to further optimize high Si loading based anode in future high energy density batteries. △ Less

Submitted 13 April, 2023; originally announced April 2023.

Key Parameters in Determining the Reactivity of Lithium Metal Battery

Authors: Bingyu Lu, Diyi Cheng, Bhagath Sreenarayanan, Weikang Li, Bhargav Bhamwala, Wurigumula Bao, Ying Shirley Meng

Abstract: Lithium (Li) metal anodes are essential for develo** next-generation high-energy-density batteries. Numerous concerns on the potential safety hazards of the Li metal have been brought up before its massive application in commercialized battery packs. However, few investigations have been performed to systematically evaluate the reactivity of Li metal anode in full cell level. Here, differential… ▽ More Lithium (Li) metal anodes are essential for develo** next-generation high-energy-density batteries. Numerous concerns on the potential safety hazards of the Li metal have been brought up before its massive application in commercialized battery packs. However, few investigations have been performed to systematically evaluate the reactivity of Li metal anode in full cell level. Here, differential scanning calorimetry (DSC) with in situ Fourier-transform infrared spectroscopy (FTIR) are used to quantitatively investigate the Li metal reactivity. Lithiated graphite (Li-Gr) and lithiated silicon (Li-Si) are also studied as the comparison samples. The reactivity of the plated Li when coupled with different electrolyte composition, morphology, and atmosphere is systematically studied. More importantly, the reactivity of Li metal full cell with different cathode materials (NMC622, LFP and LNMO) has been compared. It was found that all cell components, including electrolyte composition, Li morphology, the control of inactive Li accumulation and cathode stability, are essential in controlling the reactivity of the plated Li. After optimizing these conditions, the Li metal full cell shows no significant thermal reaction up to 400C. This work identifies the key parameters in controlling the reactivity of the plated Li and may facilitate lithium metal battery design and manufacturing in the coming future. △ Less

Submitted 28 February, 2023; originally announced March 2023.

Ultra-Low Temperature Li/CFx Batteries Enabled by Fast-transport and Anion-pairing Liquefied Gas Electrolytes

Authors: Yijie Yin, John Holoubek, Alex Liu, Baharak Sayahpour, Ganesh Raghavendran, Guorui Cai, Bing Han, Matthew Mayer, Noah B. Schorr, Timothy N. Lambert, Katharine L. Harrison, Weikang Li, Zheng Chen, Y. Shirley Meng

Abstract: Lithium fluorinated carbon is one of the most promising chemistries for high-energy-density primary energy storage systems in applications where rechargeability is not required. Though Li/CFx demonstrates high energy density under ambient conditions, achieving such a high energy density when exposed to subzero temperatures remains a challenge, particularly under high current density. Here, we repo… ▽ More Lithium fluorinated carbon is one of the most promising chemistries for high-energy-density primary energy storage systems in applications where rechargeability is not required. Though Li/CFx demonstrates high energy density under ambient conditions, achieving such a high energy density when exposed to subzero temperatures remains a challenge, particularly under high current density. Here, we report a liquefied gas electrolyte with an anion-pair solvation structure based on dimethyl ether with a low melting point and low viscosity, leading to high ionic conductivity between a wide temperature range. Besides that, through systematic X-ray photoelectron spectroscopy integrated with transmission electron microscopy characterizations, we evaluate the interface of CFx for low-temperature performance. We conclude that the fast transport and anion-pairing solvation structure of the electrolyte bring about reduced charge transfer resistance at low temperatures, which resulted in significantly enhanced performance of Li/CFx cells. Utilizing 50 mg/cm2 loading electrodes, the Li/CFx still displayed 1530 Wh/kg at reduced temperature. This work provides insights into the electrolyte design that may overcome the operational limits of batteries in extreme environments. △ Less

Submitted 1 September, 2022; originally announced September 2022.

Synthetic control of structure and conduction properties in Na-Y-Zr-Cl solid electrolytes

Authors: Elias Sebti, Ji Qi, Peter M. Richardson, Phillip Ridley, Erik A. Wu, Swastika Banerjee, Raynald Giovine, Ashley Cronk, So-Yeon Ham, Ying Shirley Meng, Shyue ** Ong, Raphaële J. Clément

Abstract: In the development of low cost, sustainable, and energy-dense batteries, chloride-based compounds are promising catholyte materials for solid-state batteries owing to their high Na-ion conductivities and oxidative stabilities. The ability to further improve Na-ion conduction, however, requires an understanding of the impact of long-range and local structural features on transport in these systems.… ▽ More In the development of low cost, sustainable, and energy-dense batteries, chloride-based compounds are promising catholyte materials for solid-state batteries owing to their high Na-ion conductivities and oxidative stabilities. The ability to further improve Na-ion conduction, however, requires an understanding of the impact of long-range and local structural features on transport in these systems. In this study, we leverage different synthesis methods to control polymorphism and cation disorder in Na-Y-Zr-Cl solid electrolytes and interrogate the impact on Na-ion conduction. We demonstrate the existence of a more conductive P2$_1$/n polymorph of Na$_2$ZrCl$_6$ formed upon ball milling. In Na$_3$YCl$_6$, the R$\bar{3}$ polymorph is shown to be more conductive than its P2$_1$/n counterpart owing to the presence of intrinsic vacancies and disorder on the Y sublattice. Transition metal ordering in the Na$_{2.25}$Y$_{0.25}$Zr$_{0.75}$Cl$_6$ composition strongly impacts Na-ion transport, where a greater mixing of Y$^{3+}$ and Zr$^{4+}$ on the transition metal sublattice facilitates ion migration through partial activation of Cl rotations at relevant temperatures. Overall, Na-ion transport sensitively depends on the phases and transition metal distributions stabilized during synthesis. These results are likely generalizable to other halide compositions and indicate that achieving control over the synthetic protocol and resultant structure is key in the pursuit of improved catholytes for high voltage solid-state sodium-ion batteries. △ Less

Submitted 16 August, 2022; originally announced August 2022.

Freestanding LiPON: from Fundamental Study to Uniformly Dense Li Metal Deposition Under Zero External Pressure

Authors: Diyi Cheng, Thomas Wynn, Bingyu Lu, Maxwell Marple, Bing Han, Ryosuke Shimizu, Bhagath Sreenarayanan, Jeffery Bickel, Peter Hosemann, Yangyuchen Yang, Han Nguyen, Weikang Li, Guomin Zhu, Minghao Zhang, Ying Shirley Meng

Abstract: Lithium phosphorus oxynitride (LiPON) is a well-known amorphous thin film solid electrolyte that has been extensively studied in the last three decades. Despite the promises to pair with Li metal anode and various cathode materials, the presence of rigid substrate and LiPONs unique amorphous, air-sensitive nature set limitations to comprehensively understand its intrinsic properties for future dev… ▽ More Lithium phosphorus oxynitride (LiPON) is a well-known amorphous thin film solid electrolyte that has been extensively studied in the last three decades. Despite the promises to pair with Li metal anode and various cathode materials, the presence of rigid substrate and LiPONs unique amorphous, air-sensitive nature set limitations to comprehensively understand its intrinsic properties for future development and applications. This work demonstrates a methodology to synthesize LiPON in a freestanding form that exhibits remarkable flexibility and a Young s modulus of ~33 GPa. Solid-state nuclear magnetic resonance (ss-NMR) and differential scanning calorimetry (DSC) results with unprecedented high signal-to-noise ratio could be obtained with such freestanding LiPON (FS-LiPON), revealing the Li-LiPON interface bonding environments quantitatively and a well-defined glass transition temperature for LiPON. Combining interfacial stress and a seeding layer, FS-LiPON demonstrates a uniform and fully dense Li metal deposition without the aid of external pressure. Such a FS-LiPON film offers new opportunities for fundamental study of LiPON material and associated interfaces, and provides perspectives for interface engineering in bulk solid-state battery. △ Less

Submitted 11 April, 2023; v1 submitted 8 August, 2022; originally announced August 2022.

Methods pressure control apparatus for lithium metal battery

Authors: Bingyu Lu, Wurigumula Bao, Weiliang Yao, Jean-Marie Doux, Chengcheng Fang, Ying Shirley Meng

Abstract: Lithium (Li) metal anodes are essential for develo** next-generation high-energy-density batteries. However, Li dendrite/whisker formation caused short-circuiting issue and short cycle life have prevented lithium metal from being viably used in rechargeable batteries. Numerous works have been done to study how to regulate the Li growth in electrochemical cycling by using external stacking forces… ▽ More Lithium (Li) metal anodes are essential for develo** next-generation high-energy-density batteries. However, Li dendrite/whisker formation caused short-circuiting issue and short cycle life have prevented lithium metal from being viably used in rechargeable batteries. Numerous works have been done to study how to regulate the Li growth in electrochemical cycling by using external stacking forces. While it is widely agreed that stack pressure positively affects the lithium plating/strip** process, the optimized pressure range provided by different works varies greatly because of the difference in the pressure control setup. In this work, a pressure control apparatus is designed for Li metal batteries with liquid and solid-state electrolytes (SSE). With considerations of minimizing cell to cell variation, a reusable split cell and pressure load cell are made for testing electrochemical cells with high precision pressure control. The capability of the designed setup is demonstrated by studying the pressure effect on the Li plating/strip** process. △ Less

Submitted 19 April, 2022; originally announced April 2022.

Suppressing chemical corrosions of lithium metal anodes

Authors: Bingyu Lu, Weikang Li, Diyi Cheng, Miguel Ceja, Wurigumula Bao, Chengcheng Fang, Ying Shirley Meng

Abstract: The lithium (Li) metal anode is essential for next generation high energy density rechargeable Li metal batteries. Although extensive studies have been performed to prolong the cycle life of Li metal batteries, the calendar life, which associates with chemical corrosion of Li metal in liquid electrolytes, has not been quantitatively understood. Here, by combing the Titration Gas Chromatography (TG… ▽ More The lithium (Li) metal anode is essential for next generation high energy density rechargeable Li metal batteries. Although extensive studies have been performed to prolong the cycle life of Li metal batteries, the calendar life, which associates with chemical corrosion of Li metal in liquid electrolytes, has not been quantitatively understood. Here, by combing the Titration Gas Chromatography (TGC) method and Cryogenic Focused Ion Beam (Cryo-FIB), we established a quantitative relationship between the chemical corrosion rate and electrochemically deposited Li morphology in various liquid electrolyte systems. We identified that the corrosion rate is dominated by the porosity of the deposited Li. The larger the porosity of deposited Li has, the faster the corrosion rate will be. We further proposed strategies to mitigate the chemical corrosion on Li thus to extend the calendar life of Li metal batteries. By strictly controlling the stacking pressure during Li plating, Li deposits with ultra-low porosity can be achieved, suppressing the corrosion rate to 0.08% per day compared with 1.71% per day of the high-porosity Li. △ Less

Submitted 19 April, 2022; originally announced April 2022.

Unraveling the stable cathode electrolyte interface in all solid-state thin-film battery operating at 5V

Authors: Ryosuke Shimizu, Diyi Cheng, Minghao Zhang, Bingyu Lu, Thomas A. Wynn, Randall Burger, Min-cheol Kim, Guomin Zhu, Ying Shirley Meng

Abstract: Spinel-type LiNi0.5Mn1.5O4 (LNMO) is one of the most promising 5 V-class cathode materials for Li-ion batteries that can achieve high energy density and low production costs. However, in liquid electrolyte cells, the high voltage causes continuous cell degradation through the oxidative decomposition of carbonate-based liquid electrolytes. In contrast, some solid-state electrolytes have a wide elec… ▽ More Spinel-type LiNi0.5Mn1.5O4 (LNMO) is one of the most promising 5 V-class cathode materials for Li-ion batteries that can achieve high energy density and low production costs. However, in liquid electrolyte cells, the high voltage causes continuous cell degradation through the oxidative decomposition of carbonate-based liquid electrolytes. In contrast, some solid-state electrolytes have a wide electrochemical stability range and can withstand the required oxidative potential. In this work, a thin-film battery consisting of a LNMO cathode with a solid lithium phosphorus oxynitride (LiPON) electrolyte is tested and their interface before and after cycling is characterized. With Li metal as the anode, this system can deliver stable performance for 600 cycles with an average Coulombic efficiency > 99%. Neutron depth profiling indicates a slight overlithiated layer at the interface prior to cycling; a result that is consistent with the excess charge capacity measured during the first cycle. Cryogenic electron microscopy further reveals intimate contact between LNMO and LiPON without noticeable structure and chemical composition evolution after extended cycling, demonstrating the superior stability of LiPON against a high voltage cathode. Consequently, we propose design guidelines for interface engineering that could accelerate the commercialization of a high voltage cell with solid or liquid electrolytes. △ Less

Submitted 5 April, 2022; originally announced April 2022.

Comments: 21 pages and 5 figures

Disorder Dynamics in Battery Nanoparticles During Phase Transitions Revealed by Operando Single-Particle Diffraction

Authors: Jason Huang, Daniel Weinstock, Hayley Hirsh, Ryan Bouck, Minghao Zhang, Oleg Yu. Gorobtsov, Malia Okamura, Ross Harder, Wonsuk Cha, Jacob P. C. Ruff, Y. Shirley Meng, Andrej Singer

Abstract: Structural and ion-ordering phase transitions limit the viability of sodium-ion intercalation materials in grid scale battery storage by reducing their lifetime. However, the combination of phenomena in nanoparticulate electrodes creates complex behavior that is difficult to investigate, especially on the single nanoparticle scale under operating conditions. In this work, operando single-particle… ▽ More Structural and ion-ordering phase transitions limit the viability of sodium-ion intercalation materials in grid scale battery storage by reducing their lifetime. However, the combination of phenomena in nanoparticulate electrodes creates complex behavior that is difficult to investigate, especially on the single nanoparticle scale under operating conditions. In this work, operando single-particle x-ray diffraction (oSP-XRD) is used to observe single-particle rotation, interlayer spacing, and layer misorientation in a functional sodium-ion battery. oSP-XRD is applied to Na$_{2/3}$[Ni$_{1/3}$Mn$_{2/3}$]O$_{2}$, an archetypal P2-type sodium-ion positive electrode material with the notorious P2-O2 phase transition induced by sodium (de)intercalation. It is found that during sodium extraction, the misorientation of crystalline layers inside individual particles increases before the layers suddenly align just prior to the P2-O2 transition. The increase in the long-range order coincides with an additional voltage plateau signifying a phase transition prior to the P2-O2 transition. To explain the layer alignment, a model for the phase evolution is proposed that includes a transition from localized to correlated Jahn-Teller distortions. The model is anticipated to guide further characterization and engineering of sodium-ion intercalation materials with P2-O2 type transitions. oSP-XRD therefore opens a powerful avenue for revealing complex phase behavior in heterogeneous nanoparticulate systems. △ Less

Submitted 8 November, 2021; originally announced November 2021.

Comments: 23 pages, 4 main figures, 9 supplemental figures

Journal ref: Adv. Energy Mat. 12, 12 (2022) 2103521

Structure-selective operando x-ray spectroscopy

Authors: Daniel Weinstock, Hayley S. Hirsh, Oleg Yu. Gorobtsov, Minghao Zhang, Jason Huang, Ryan Bouck, Jacob P. C. Ruff, Y. Shirley Meng, Andrej Singer

Abstract: The relationship between charge and structure dictates the properties of electrochemical systems. For example, reversible Na-ion intercalation - a low-cost alternative to Li-ion technology - often induces detrimental structural phase transformations coupled with charge compensation reactions. However, little is known about the underpinning charge-structure mechanisms because the reduction-oxidatio… ▽ More The relationship between charge and structure dictates the properties of electrochemical systems. For example, reversible Na-ion intercalation - a low-cost alternative to Li-ion technology - often induces detrimental structural phase transformations coupled with charge compensation reactions. However, little is known about the underpinning charge-structure mechanisms because the reduction-oxidation (redox) reactions within coexisting structural phases have so far eluded direct operando investigation. Here, we distinguish x-ray spectra of individual crystalline phases operando during a redox-induced phase transformation in P2-Na2/3Ni1/3Mn2/3O2 - an archetypal layered oxide for sodium-ion batteries. We measure the resonant elastic scattering on the Bragg reflection corresponding to the P2-phase lattice spacing. These resonant spectra become static midway through the sodium extraction in an operando coin cell, while the overall sodium extraction proceeds as evidenced by the X-ray absorption averaging over all electrochemically active Ni atoms. The stop of redox activity in the P2-structure signifies its inability to host Ni4+ ions. The coincident emergence of the O2- structure reveals the rigid link between the local redox and the long-range order during the phase transformation. The structure-selective x-ray spectroscopy thus opens a powerful avenue for resolving the dynamic chemistry of different structural phases in multi-phase electrochemical systems. △ Less

Submitted 12 August, 2021; originally announced August 2021.

Journal ref: ACS Energy Lett. 7, 1 (2022) 261-266

Bridging Nano and Micro-scale X-ray Tomography for Battery Research by Leveraging Artificial Intelligence

Authors: Jonathan Scharf, Mehdi Chouchane, Donal P. Finegan, Bingyu Lu, Christopher Redquest, Min-cheol Kim, Weiliang Yao, Alejandro A. Franco, Dan Gostovic, Zhao Liu, Mark Riccio, František Zelenka, Jean-Marie Doux, Ying Shirley Meng

Abstract: X-ray Computed Tomography (X-ray CT) is a well-known non-destructive imaging technique where contrast originates from the materials' absorption coefficients. Novel battery characterization studies on increasingly challenging samples have been enabled by the rapid development of both synchrotron and laboratory-scale imaging systems as well as innovative analysis techniques. Furthermore, the recent… ▽ More X-ray Computed Tomography (X-ray CT) is a well-known non-destructive imaging technique where contrast originates from the materials' absorption coefficients. Novel battery characterization studies on increasingly challenging samples have been enabled by the rapid development of both synchrotron and laboratory-scale imaging systems as well as innovative analysis techniques. Furthermore, the recent development of laboratory nano-scale CT (NanoCT) systems has pushed the limits of battery material imaging towards voxel sizes previously achievable only using synchrotron facilities. Such systems are now able to reach spatial resolutions down to 50 nm. Given the non-destructive nature of CT, in-situ and operando studies have emerged as powerful methods to quantify morphological parameters, such as tortuosity factor, porosity, surface area, and volume expansion during battery operation or cycling. Combined with powerful Artificial Intelligence (AI)/Machine Learning (ML) analysis techniques, extracted 3D tomograms and battery-specific morphological parameters enable the development of predictive physics-based models that can provide valuable insights for battery engineering. These models can predict the impact of the electrode microstructure on cell performances or analyze the influence of material heterogeneities on electrochemical responses. In this work, we review the increasing role of X-ray CT experimentation in the battery field, discuss the incorporation of AI/ML in analysis, and provide a perspective on how the combination of multi-scale CT imaging techniques can expand the development of predictive multiscale battery behavioral models. △ Less

Submitted 15 July, 2021; originally announced July 2021.

Comments: 33 pages, 5 figures

Edge-Propagation Discharge Mechanism in CFx Batteries -- a First Principles and Experimental Study

Authors: Kevin Leung, Noah B. Schorr, Matthew Mayer, Timothy N. Lambert, Y. Shirley Meng, K. L. Harrison

Abstract: Graphite fluoride (CFx) cathodes coupled with lithium anodes yield one of the highest theoretical energy densities (>860 Wh/g) among primary batteries. In practice, the observed discharge voltage (~2.5 V) is significantly lower than thermodynamic limits (>4.5 V), the discharge rate is low, and so far Li/CFx has only been used in primary batteries. Understanding the discharge mechanism at atomic le… ▽ More Graphite fluoride (CFx) cathodes coupled with lithium anodes yield one of the highest theoretical energy densities (>860 Wh/g) among primary batteries. In practice, the observed discharge voltage (~2.5 V) is significantly lower than thermodynamic limits (>4.5 V), the discharge rate is low, and so far Li/CFx has only been used in primary batteries. Understanding the discharge mechanism at atomic length scales will improve practical CFx energy density, rate capability, and rechargeability. So far, purely experimental techniques have not identified the correct discharge mechanism or explained the discharge voltage. We apply Density Functional Theory calculations to demonstrate that a CFx-edge propagation discharge mechanism based on lithium insertion at the CF/C boundary in partially discharged CFx exhibits a voltage range of 2.5 to 2.9 V -- depending on whether solvent molecules are involved. The voltages and solvent dependence agrees with our discharge and galvanostatic intermittent titration technique measurements. The predicted discharge kinetics are consistent with CFx operations. Finally, we predict Li/CFx rechargeability under the application of high potentials, along a charging pathway different from that of discharge. Our work represents a general, quasi-kinetic framework to understand the discharge of conversion cathodes, circumventing the widely used phase diagram approach which most likely does not apply to Li/CFx because equilibrium conditions are not attained in this system. △ Less

Submitted 2 July, 2021; originally announced July 2021.

Comments: 31 pages, 7 figures

Journal ref: Chemistry of Materials vol. 33, pp. 1760-1770 (2021)

Interaction and transformation of metastable defects in intercalation materials

Authors: O. Yu. Gorobtsov, H. Hirsh, M. Zhang, D. Sheyfer, S. D. Matson, D. Weinstock, R. Bouck, Z. Wang, W. Cha, J. Maser, R. Harder, Y. Sh. Meng, A. Singer

Abstract: Non-equilibrium defects often dictate macroscopic functional properties of materials. In intercalation hosts, widely used in rechargeable batteries, high-dimensional defects largely define reversibility and kinetics1,2,3,4. However, transient defects briefly appearing during ionic transport have been challenging to capture, limiting the understanding of their life cycle and impact. Here, we overco… ▽ More Non-equilibrium defects often dictate macroscopic functional properties of materials. In intercalation hosts, widely used in rechargeable batteries, high-dimensional defects largely define reversibility and kinetics1,2,3,4. However, transient defects briefly appearing during ionic transport have been challenging to capture, limiting the understanding of their life cycle and impact. Here, we overcome this challenge and track operando the interaction and impact of metastable defects within NaxNi1-xMnyO2 intercalation hosts in a charging sodium-ion battery. Three-dimensional coherent X-ray imaging3,4,5 reveals transformation and self-healing of a metastable domain boundary, glissile dislocation loop, and stacking fault. A local strain gradient suggests a quantifiable difference in ion diffusion, coincident with the macroscopic change in diffusion coefficient. Analysis of the unexpected4,6 defect anisotropy highlights the importance of mesostructure, suggesting a possible control approach and disputing the rigidity of the framework layers. The shared nature of oxygen framework layers makes our results applicable to a wide range of intercalation materials. △ Less

Submitted 10 August, 2021; v1 submitted 22 June, 2021; originally announced June 2021.

Conformal Three-Dimensional Interphase of Li Metal Anode Revealed by Low Dose Cryo-Electron Microscopy

Authors: Bing Han, Xiangyan Li, Shuang Bai, Yucheng Zou, Bingyu Lu, Minghao Zhang, Xiaomin Ma, Zhi Chang, Ying Shirley Meng, Meng Gu

Abstract: Using cryogenic transmission electron microscopy, we revealed three dimensional (3D) structural details of the electrochemically plated lithium (Li) flakes and their solid electrolyte interphase (SEI), including the composite SEI skin-layer and SEI fossil pieces buried inside the Li matrix. As the SEI skin-layer is largely comprised of nanocrystalline LiF and Li2O in amorphous polymeric matrix, wh… ▽ More Using cryogenic transmission electron microscopy, we revealed three dimensional (3D) structural details of the electrochemically plated lithium (Li) flakes and their solid electrolyte interphase (SEI), including the composite SEI skin-layer and SEI fossil pieces buried inside the Li matrix. As the SEI skin-layer is largely comprised of nanocrystalline LiF and Li2O in amorphous polymeric matrix, when complete Li strip** occurs, the compromised SEI three-dimensional framework buckles, forming nanoscale bends and wrinkles. We showed that the flexibility and resilience of the SEI skin-layer plays a vital role in preserving an intact SEI 3D framework after Li strip**. The intact SEI network enables the nucleation and growth of the newly plated Li inside the previously formed SEI network in the subsequent cycles, preventing additional large amount of SEI formation between newly plated Li metal and the electrolyte. In addition, cells cycled under the accurately controlled uniaxial pressure can further enhance the repeated utilization of the SEI framework and improve the coulombic efficiency (CE) by up to 97%, demonstrating an effective strategy of reducing the formation of additional SEI and inactive dead Li. The identification of such flexible and porous 3D SEI framework clarifies the working mechanism of SEI in lithium metal anode for batteries. The insights provided in this work will inspire researchers to design more functional artificial 3D SEI on other metal anodes to improve rechargeable metal battery with long cycle life. △ Less

Submitted 10 June, 2021; originally announced June 2021.

Investigating Degradation Modes in Zn-AgO Aqueous Batteries with $\textit{In-Situ}$ X-ray Micro Computed Tomography

Authors: Jonathan Scharf, Lu Yin, Christopher Redquest, Ruixiao Liu, Xueying L. Quinn, Jeff Ortega, Xia Wei, Joseph Wang, Jean-Marie Doux, Ying Shirley Meng

Abstract: To meet growing energy demands, degradation mechanisms of energy storage devices must be better understood. As a non-destructive tool, X-ray Computed Tomography (CT) has been increasingly used by the battery community to perform $\textit{in-situ}$ experiments that can investigate dynamic phenomena. However, few have used X-ray CT to study representative battery systems over long cycle lifetimes (>… ▽ More To meet growing energy demands, degradation mechanisms of energy storage devices must be better understood. As a non-destructive tool, X-ray Computed Tomography (CT) has been increasingly used by the battery community to perform $\textit{in-situ}$ experiments that can investigate dynamic phenomena. However, few have used X-ray CT to study representative battery systems over long cycle lifetimes (>100 cycles). Here, we report the $\textit{in-situ}$ CT study of Zn-Ag batteries and demonstrate the effects of current collector parasitic gassing over long-term storage and cycling. We design performance representative $\textit{in-situ}$ CT cells that can achieve >250 cycles at a high areal capacity of $\mathrm{12.5\;mAh/cm^2}$. Combined with electrochemical experiments, the effects of current collector parasitic gassing are revealed with micro-scale CT (MicroCT). The volume expansion and evolution of ZnO and Zn depletion is quantified with cycling and elevated temperature testing. The experimental insights are then utilized to develop larger form-factor $\mathrm{4\;cm^2}$ cells with electrochemically compatible current collectors. With this, we demonstrate over 325 cycles at a high capacity of $\mathrm{12.5\;mAh/cm^2}$ for a $\mathrm{4\;cm^2}$ form-factor. This work demonstrates that $\textit{in-situ}$ X-ray CT used in long cycle-lifetime studies can be applied to examine a multitude of other battery chemistries to improve their performances. △ Less

Submitted 7 May, 2021; originally announced May 2021.

Comments: 20 Pages and 6 Figures

Carbon Free High Loading Silicon Anodes Enabled by Sulfide Solid Electrolytes for Robust All Solid-State Batteries

Authors: Darren H. S. Tan, Yu-Ting Chen, Hedi Yang, Wurigumula Bao, Bhagath Sreenarayanan, Jean-Marie Doux, Weikang Li, Bingyu Lu, So-Yeon Ham, Baharak Sayahpour, Jonathan Scharf, Erik A. Wu, Grayson Deysher, Hyea Eun Han, Hoe ** Hah, Hyeri Jeong, Zheng Chen, Ying Shirley Meng

Abstract: The development of silicon anodes to replace conventional graphite in efforts to increase energy densities of lithium-ion batteries has been largely impeded by poor interfacial stability against liquid electrolytes. Here, stable operation of 99.9 weight% micro-Si (uSi) anode is enabled by utilizing the interface passivating properties of sulfide based solid-electrolytes. Bulk to surface characteri… ▽ More The development of silicon anodes to replace conventional graphite in efforts to increase energy densities of lithium-ion batteries has been largely impeded by poor interfacial stability against liquid electrolytes. Here, stable operation of 99.9 weight% micro-Si (uSi) anode is enabled by utilizing the interface passivating properties of sulfide based solid-electrolytes. Bulk to surface characterization, as well as quantification of interfacial components showed that such an approach eliminates continuous interfacial growth and irreversible lithium losses. In uSi || layered-oxide full cells, high current densities at room temperature (5 mA cm 2), wide operating temperature (-20°C to 80°C) and high loadings (>11 mAh cm-2) were demonstrated for both charge and discharge operations. The promising battery performance can be attributed to both the desirable interfacial property between uSi and sulfide electrolytes, as well as the unique chemo-mechanical behavior of the Li-Si alloys. △ Less

Submitted 6 March, 2021; originally announced March 2021.

Comments: 13 pages, 5 figures

Quantitatively Designing Porous Copper Current Collectors for Lithium Metal Anode

Authors: Bingyu Lu, Edgar Olivera, Jonathan Scharf, Mehdi Chouchane, Chengcheng Fang, Miguel Ceja, Lisa Pangilinan, Shiqi Zheng, Andrew Dawson, Diyi Cheng, Wurigumula Bao, Oier Arcelus, Alejandro A. Franco, Xiaochun Li, Sarah H. Tolbert, Ying Shirley Meng

Abstract: Lithium metal has been an attractive candidate as a next generation anode material. Despite its popularity, stability issues of lithium in the liquid electrolyte and the formation of lithium whiskers have kept it from practical use. Three-dimensional (3D) current collectors have been proposed as an effective method to mitigate whiskers growth. Although extensive research efforts have been done, th… ▽ More Lithium metal has been an attractive candidate as a next generation anode material. Despite its popularity, stability issues of lithium in the liquid electrolyte and the formation of lithium whiskers have kept it from practical use. Three-dimensional (3D) current collectors have been proposed as an effective method to mitigate whiskers growth. Although extensive research efforts have been done, the effects of three key parameters of the 3D current collectors, namely the surface area, the tortuosity factor, and the surface chemistry, on the performance of lithium metal batteries remain elusive. Herein, we quantitatively studied the role of these three parameters by synthesizing four types of porous copper networks with different sizes of well-structured micro-channels. X-ray microscale computed tomography (micro-CT) allowed us to assess the surface area, the pore size and the tortuosity factor of the porous copper materials. A metallic Zn coating was also applied to study the influence of surface chemistry on the performance of the 3D current collectors. The effects of these parameters on the performance were studied in detail through Scanning Electron Microscopy (SEM) and Titration Gas Chromatography (TGC). Stochastic simulations further allowed us to interpret the role of the tortuosity factor in lithiation. By understanding these effects, the optimal range of the key parameters is found for the porous copper anodes and their performance is predicted. Using these parameters to inform the design of porous copper anodes for Li deposition, Coulombic efficiencies (CE) of up to 99.56% are achieved, thus paving the way for the design of effective 3D current collector systems. △ Less

Submitted 7 February, 2021; originally announced February 2021.

Imaging real-time amorphization of hybrid perovskite solar cells under electrical biasing

Authors: Min-cheol Kim, Namyoung Ahn, Diyi Cheng, Mingjie Xu, Xiaoqing Pan, Suk Jun Kim, Yanqi Luo, David P. Fenning, Darren H. S. Tan, Minghao Zhang, So-Yeon Ham, Kiwan Jeong, Mansoo Choi, Ying Shirley Meng

Abstract: Perovskite solar cells have drawn much attention in recent years, owing to its world-record setting photovoltaic performances. Despite its promising use in tandem applications and flexible devices, its practicality is still limited by its structural instability often arising from ion migration and defect formation. While it is generally understood that ion instability is a primary cause for degrad… ▽ More Perovskite solar cells have drawn much attention in recent years, owing to its world-record setting photovoltaic performances. Despite its promising use in tandem applications and flexible devices, its practicality is still limited by its structural instability often arising from ion migration and defect formation. While it is generally understood that ion instability is a primary cause for degradation, there is still a lack of direct evidence of structural transformation at the atomistic scale. Such an understanding is crucial to evaluate and pin-point how such instabilities are induced relative to external perturbations such as illumination or electrical bias with time, allowing researchers to devise effective strategies to mitigate them. Here, we designed an in-situ TEM setup to enable real-time observation of amorphization in double cation mixed perovskite materials under electrical biasing at 1 V. It is found that amorphization occurs along the (001) and (002) planes, which represents the observation of in-situ facet-dependent amorphization of a perovskite crystal. To reverse the degradation, the samples were heated at 50 oC and was found to recrystallize, effectively regaining its performance losses. This work is vital toward understanding fundamental ion-migration phenomena and address instability challenges of perovskite optoelectronics. △ Less

Submitted 23 October, 2020; originally announced October 2020.

High Performance Printed AgO-Zn Rechargeable Battery for Flexible Electronics

Authors: Lu Yin, Jonathan Scharf, Jessica Ma, Jean-Marie Doux, Christopher Redquest, Viet Le, Yin Yijie, Jeff Ortega, Xia Wei, Joseph Wang, Ying Shirley Meng

Abstract: The rise of flexible electronics calls for cost-effective and scalable batteries with good mechanical and electrochemical performance. In this work, we developed printable, polymer-based AgO-Zn batteries that feature flexibility, rechargeability, high areal capacity, and low impedance. Using elastomeric substrate and binders, the current collectors, electrodes, and separators can be easily screen-… ▽ More The rise of flexible electronics calls for cost-effective and scalable batteries with good mechanical and electrochemical performance. In this work, we developed printable, polymer-based AgO-Zn batteries that feature flexibility, rechargeability, high areal capacity, and low impedance. Using elastomeric substrate and binders, the current collectors, electrodes, and separators can be easily screen-printed layer-by-layer and vacuum-sealed in a stacked configuration. The batteries are customizable in sizes and capacities, with the highest obtained areal capacity of 54 mAh/cm2 for primary applications. Advanced micro-CT and EIS were used to characterize the battery, whose mechanical stability was tested with repeated twisting and bending. The batteries were used to power a flexible E-ink display system that requires a high-current drain and exhibited superior performance than commercial coin-cell batteries. The developed battery presents a practical solution for powering a wide range of electronics and holds major implications for the future development of practical and high-performance flexible batteries. △ Less

Submitted 31 August, 2020; originally announced September 2020.

Comments: 32 pages, 6 figures

Pressure-tailored lithium deposition and dissolution in lithium metal batteries

Authors: Chengcheng Fang, Bingyu Lu, Gorakh Pawar, Minghao Zhang, Diyi Cheng, Shuru Chen, Miguel Ceja, Jean-Marie Doux, Mei Cai, Boryann Liaw, Ying Shirley Meng

Abstract: A porous electrode resulting from unregulated Li growth is the major cause of the low Coulombic efficiency and potential safety hazards of rechargeable Li metal batteries. Strategies aiming to achieve large granular Li deposits have been extensively explored; yet, the ideal Li deposits, which consist of large Li particles that are seamlessly packed on the electrode and can be reversibly deposited… ▽ More A porous electrode resulting from unregulated Li growth is the major cause of the low Coulombic efficiency and potential safety hazards of rechargeable Li metal batteries. Strategies aiming to achieve large granular Li deposits have been extensively explored; yet, the ideal Li deposits, which consist of large Li particles that are seamlessly packed on the electrode and can be reversibly deposited and stripped, have never been achieved. Here, by controlling the uniaxial stack pressure during battery operation, a dense Li deposition (99.49% electrode density) with an ideal columnar structure has been achieved. Using multi-scale characterization and simulation, we elucidated the critical role of stack pressure on Li nucleation, growth and dissolution processes, and developed innovative strategies to maintain the ideal Li morphology during extended cycling. The precision manipulation of Li deposition and dissolution is a critical step to enable fast charging and low temperature operation for Li metal batteries. △ Less

Submitted 17 August, 2020; originally announced August 2020.

Local structure of glassy lithium phosphorus oxynitride thin films: a combined experimental and ab initio approach

Authors: Maxwell A. T. Marple, Thomas A. Wynn, Diyi Cheng, Ryosuke Shimizu, Harris E. Mason, Y. Shirley Meng

Abstract: Lithium phosphorus oxynitride (LiPON) is an amorphous solid-state lithium ion conductor displaying exemplary cyclability against lithium metal anodes. There is no definitive explanation for this stability due to the limited understanding of the structure of LiPON. We provide a structural model of RF-sputtered LiPON via experimental and computational spectroscopic methods. Information about the sho… ▽ More Lithium phosphorus oxynitride (LiPON) is an amorphous solid-state lithium ion conductor displaying exemplary cyclability against lithium metal anodes. There is no definitive explanation for this stability due to the limited understanding of the structure of LiPON. We provide a structural model of RF-sputtered LiPON via experimental and computational spectroscopic methods. Information about the short-range structure results from 1D and 2D solid-state nuclear magnetic resonance experiments investigating chemical shift anisotropy and dipolar interactions. These results are compared with first principles chemical shielding calculations of Li-P-O/N crystals and ab initio molecular dynamics-generated amorphous LiPON models to unequivocally identify the glassy structure as primarily isolated phosphate monomers with N incorporated in both apical and as bridging sites in phosphate dimers. Structural results suggest LiPON's stability is a result of its glassy character. Free-standing LiPON films are produced that exhibit a high degree of flexibility highlighting the unique mechanical properties of glassy materials. △ Less

Submitted 24 June, 2020; originally announced June 2020.

Unveiling the Stable Nature of the Solid Electrolyte Interphase between Lithium Metal and LiPON via Cryogenic Electron Microscopy

Authors: Diyi Cheng, Thomas Andrew Wynn, Xuefeng Wang, Shen Wang, Minghao Zhang, Ryosuke Shimizu, Shuang Bai, Han Nguyen, Chengcheng Fang, Min-cheol Kim, Weikang Li, Bingyu Lu, Suk Jun Kim, Ying Shirley Meng

Abstract: The solid electrolyte interphase (SEI) is regarded as the most complex but the least understood constituent in secondary batteries using liquid and solid electrolytes. The nanostructures of SEIs were recently reported to be equally important to the chemistry of SEIs for stabilizing Li metal in liquid electrolyte. However, the dearth of such knowledge in all-solid-state battery (ASSB) has hindered… ▽ More The solid electrolyte interphase (SEI) is regarded as the most complex but the least understood constituent in secondary batteries using liquid and solid electrolytes. The nanostructures of SEIs were recently reported to be equally important to the chemistry of SEIs for stabilizing Li metal in liquid electrolyte. However, the dearth of such knowledge in all-solid-state battery (ASSB) has hindered a complete understanding of how certain solid-state electrolytes, such as LiPON, manifest exemplary stability against Li metal. Characterizing such solid-solid interfaces is difficult due to the buried, highly reactive, and beam-sensitive nature of the constituents within. By employing cryogenic electron microscopy (cryo-EM), the interphase between Li metal and LiPON is successfully preserved and probed, revealing a multilayer mosaic SEI structure with concentration gradients of nitrogen and phosphorous, materializing as crystallites within an amorphous matrix. This unique SEI nanostructure is less than 80 nm and is shown stable and free of any organic lithium containing species or lithium fluoride components, in contrast to SEIs often found in state-of-the-art organic liquid electrolytes. Our findings reveal insights on the nanostructures and chemistry of such SEIs as a key component in lithium metal batteries to stabilize Li metal anode. △ Less

Submitted 18 November, 2020; v1 submitted 23 June, 2020; originally announced June 2020.

Glassy Li Metal Anode for High-Performance Rechargeable Li Batteries

Authors: Xuefeng Wang, Gorakh Pawar, Ye**g Li, Xiaodi Ren, Minghao Zhang, Bingyu Lu, Abhik Banerjee, ** Liu, Eric J. Dufek, Ji-Guang Zhang, Jie Xiao, Jun Liu, Ying Shirley Meng, Boryann Liaw

Abstract: Controlling nanostructure from molecular, crystal lattice to the electrode level remains as arts in practice, where nucleation and growth of the crystals still require more fundamental understanding and precise control to shape the microstructure of metal deposits and their properties. This is vital to achieve dendrite-free Li metal anodes with high electrochemical reversibility for practical high… ▽ More Controlling nanostructure from molecular, crystal lattice to the electrode level remains as arts in practice, where nucleation and growth of the crystals still require more fundamental understanding and precise control to shape the microstructure of metal deposits and their properties. This is vital to achieve dendrite-free Li metal anodes with high electrochemical reversibility for practical high-energy rechargeable Li batteries. Here, cryogenic-transmission electron microscopy was used to capture the dynamic growth and atomic structure of Li metal deposits at the early nucleation stage, in which a phase transition from amorphous, disordered states to a crystalline, ordered one was revealed as a function of current density and deposition time. The real-time atomic interaction over wide spatial and temporal scales was depicted by the reactive-molecular dynamics simulations. The results show that the condensation accompanied with the amorphous-to-crystalline phase transition requires sufficient exergy, mobility and time to carry out, contrary to what the classical nucleation theory predicts. These variabilities give rise to different kinetic pathways and temporal evolutions, resulting in various degrees of order and disorder nanostructure in nano-sized domains that dominate in the morphological evolution and reversibility of Li metal electrode. Compared to crystalline Li, amorphous/glassy Li outperforms in cycle life in high-energy rechargeable batteries and is the desired structure to achieve high kinetic stability for long cycle life. △ Less

Submitted 1 April, 2020; v1 submitted 24 October, 2019; originally announced October 2019.

Comments: 29 pages, 8 figures

Stack Pressure Considerations for Room Temperature All-Solid-State Lithium Metal Batteries

Authors: Jean-Marie Doux, Han Nguyen, Darren H. S. Tan, Abhik Banerjee, Xuefeng Wang, Erik A. Wu, Chiho Jo, Hedi Yang, Ying Shirley Meng

Abstract: All-solid-state batteries are expected to enable batteries with high energy density with the use of lithium metal anodes. Although solid electrolytes are believed to be mechanically strong enough to prevent lithium dendrites from propagating, various reports today still show cell failure due to lithium dendritic growth at room temperature. While cell parameters such as current density, electrolyte… ▽ More All-solid-state batteries are expected to enable batteries with high energy density with the use of lithium metal anodes. Although solid electrolytes are believed to be mechanically strong enough to prevent lithium dendrites from propagating, various reports today still show cell failure due to lithium dendritic growth at room temperature. While cell parameters such as current density, electrolyte porosity and interfacial properties have been investigated, mechanical properties of lithium metal and the role of applied stack pressure on the shorting behavior is still poorly understood. Here, we investigated failure mechanisms of lithium metal in all-solid-state batteries as a function of stack pressure, and conducted in situ characterization of the interfacial and morphological properties of the buried lithium in solid electrolytes. We found that a low stack pressure of 5 MPa allows reliable plating and strip** in a lithium symmetric cell for more than 1000 hours, and a Li | Li6PS5Cl | LiNi0.80Co0.15Al0.05O2 full cell, plating more than 4 um of lithium per charge, is able to cycle over 200 cycles at room temperature. These results suggest the possibility of enabling the lithium metal anode in all-solid-state batteries at reasonable stack pressures. △ Less

Submitted 3 December, 2019; v1 submitted 4 October, 2019; originally announced October 2019.

Comments: 13 pages, 5 figures

A Data-Driven Approach for Accurate Rainfall Prediction

Authors: Shilpa Manandhar, Soumyabrata Dev, Yee Hui Lee, Yu Song Meng, Stefan Winkler

Abstract: In recent years, there has been growing interest in using Precipitable Water Vapor (PWV) derived from Global Positioning System (GPS) signal delays to predict rainfall. However, the occurrence of rainfall is dependent on a myriad of atmospheric parameters. This paper proposes a systematic approach to analyze various parameters that affect precipitation in the atmosphere. Different ground-based wea… ▽ More In recent years, there has been growing interest in using Precipitable Water Vapor (PWV) derived from Global Positioning System (GPS) signal delays to predict rainfall. However, the occurrence of rainfall is dependent on a myriad of atmospheric parameters. This paper proposes a systematic approach to analyze various parameters that affect precipitation in the atmosphere. Different ground-based weather features like Temperature, Relative Humidity, Dew Point, Solar Radiation, PWV along with Seasonal and Diurnal variables are identified, and a detailed feature correlation study is presented. While all features play a significant role in rainfall classification, only a few of them, such as PWV, Solar Radiation, Seasonal and Diurnal features, stand out for rainfall prediction. Based on these findings, an optimum set of features are used in a data-driven machine learning algorithm for rainfall prediction. The experimental evaluation using a four-year (2012-2015) database shows a true detection rate of 80.4%, a false alarm rate of 20.3%, and an overall accuracy of 79.6%. Compared to the existing literature, our method significantly reduces the false alarm rates. △ Less

Submitted 10 July, 2019; originally announced July 2019.

Comments: Published in IEEE Transactions on Geoscience and Remote Sensing, 2019

Quantifying Inactive Lithium in Lithium Metal Batteries

Authors: Chengcheng Fang, **xing Li, Minghao Zhang, Yihui Zhang, Fan Yang, Jungwoo Z. Lee, Min-Han Lee, Judith Alvarado, Marshall A. Schroeder, Yangyuchen Yang, Bingyu Lu, Nicholas Williams, Miguel Ceja, Li Yang, Mei Cai, **g Gu, Kang Xu, Xuefeng Wang, Ying Shirley Meng

Abstract: Inactive lithium (Li) formation is the immediate cause of capacity loss and catastrophic failure of Li metal batteries. However, the chemical component and the atomic level structure of inactive Li have rarely been studied due to the lack of effective diagnosis tools to accurately differentiate and quantify Li+ in solid electrolyte interphase (SEI) components and the electrically isolated unreacte… ▽ More Inactive lithium (Li) formation is the immediate cause of capacity loss and catastrophic failure of Li metal batteries. However, the chemical component and the atomic level structure of inactive Li have rarely been studied due to the lack of effective diagnosis tools to accurately differentiate and quantify Li+ in solid electrolyte interphase (SEI) components and the electrically isolated unreacted metallic Li0, which together comprise the inactive Li. Here, by introducing a new analytical method, Titration Gas Chromatography (TGC), we can accurately quantify the contribution from metallic Li0 to the total amount of inactive Li. We uncover that the Li0, rather than the electrochemically formed SEI, dominates the inactive Li and capacity loss. Using cryogenic electron microscopies to further study the microstructure and nanostructure of inactive Li, we find that the Li0 is surrounded by insulating SEI, losing the electronic conductive pathway to the bulk electrode. Coupling the measurements of the Li0 global content to observations of its local atomic structure, we reveal the formation mechanism of inactive Li in different types of electrolytes, and identify the true underlying cause of low Coulombic efficiency in Li metal deposition and strip**. We ultimately propose strategies to enable the highly efficient Li deposition and strip** to enable Li metal anode for next generation high energy batteries. △ Less

Submitted 31 May, 2019; v1 submitted 2 November, 2018; originally announced November 2018.

A Potential Low Cost Remote Sensing Using GPS Derived PWV

Authors: Shilpa Manandhar, Yee Hui Lee, Yu Song Meng, Feng Yuan, Soumyabrata Dev

Abstract: In this paper, the Precipitable Water Vapor (PWV) content of the atmosphere is derived using the Global Positioning System (GPS) signal delays. The PWV values from GPS are calculated at different elevation cut-off angles. It was found that the significant range of elevation cut-off angles is from 5 degrees to 50 degrees. The PWV values calculated from GPS using varying cut-off angles from this ran… ▽ More In this paper, the Precipitable Water Vapor (PWV) content of the atmosphere is derived using the Global Positioning System (GPS) signal delays. The PWV values from GPS are calculated at different elevation cut-off angles. It was found that the significant range of elevation cut-off angles is from 5 degrees to 50 degrees. The PWV values calculated from GPS using varying cut-off angles from this range were then compared to the PWV values calculated using the radiosonde data. The correlation coefficient and the Root Mean Square (RMS) error between the GPS and radiosonde derived PWV decreases with the increasing cut-off angle and the distance between the two. The seasonal parameters also effect the relation between the two. △ Less

Submitted 4 May, 2018; originally announced May 2018.

Comments: Published in Proc. IEEE International Geoscience and Remote Sensing Symposium (IGARSS), 2018

Systematic Study of Weather Variables for Rainfall Detection

Authors: Shilpa Manandhar, Soumyabrata Dev, Yee Hui Lee, Stefan Winkler, Yu Song Meng

Abstract: Numerous weather parameters affect the occurrence and amount of rainfall. Therefore, it is important to study these parameters and their interdependency. In this paper, different weather and time-related variables -- relative humidity, solar radiation, temperature, dew point, day-of-year, and time-of-day are analyzed systematically using Principal Component Analysis (PCA). We found that four princ… ▽ More Numerous weather parameters affect the occurrence and amount of rainfall. Therefore, it is important to study these parameters and their interdependency. In this paper, different weather and time-related variables -- relative humidity, solar radiation, temperature, dew point, day-of-year, and time-of-day are analyzed systematically using Principal Component Analysis (PCA). We found that four principal components explain a cumulative variance of 85%. The first two principal components are applied to distinguish rain and no-rain scenarios as well. We conclude that all 7 variables have similar contribution towards rainfall detection. △ Less

Submitted 4 May, 2018; originally announced May 2018.

Comments: Published in Proc. IEEE International Geoscience and Remote Sensing Symposium (IGARSS), 2018

A Data-driven Approach to Detecting Precipitation from Meteorological Sensor Data

Authors: Shilpa Manandhar, Soumyabrata Dev, Yee Hui Lee, Yu Song Meng, Stefan Winkler

Abstract: Precipitation is dependent on a myriad of atmospheric conditions. In this paper, we study how certain atmospheric parameters impact the occurrence of rainfall. We propose a data-driven, machine-learning based methodology to detect precipitation using various meteorological sensor data. Our approach achieves a true detection rate of 87.4% and a moderately low false alarm rate of 32.2%. Precipitation is dependent on a myriad of atmospheric conditions. In this paper, we study how certain atmospheric parameters impact the occurrence of rainfall. We propose a data-driven, machine-learning based methodology to detect precipitation using various meteorological sensor data. Our approach achieves a true detection rate of 87.4% and a moderately low false alarm rate of 32.2%. △ Less

Submitted 4 May, 2018; originally announced May 2018.

Comments: Published in Proc. IEEE International Geoscience and Remote Sensing Symposium (IGARSS), 2018

Homogenization of Halide Distribution and Carrier Dynamics in Alloyed Organic-Inorganic Perovskites

Authors: Juan-Pablo Correa-Baena, Yanqi Luo, Thomas M. Brenner, Jordan Snaider, Shi**g Sun, Xueying Li, Mallory A. Jensen, Lea Nienhaus, Sarah Wieghold, Jeremy R. Poindexter, Shen Wang, Ying Shirley Meng, Ti Wang, Barry Lai, Moungi G. Bawendi, Libai Huang, David P. Fenning, Tonio Buonassisi

Abstract: Perovskite solar cells have shown remarkable efficiencies beyond 22%, through organic and inorganic cation alloying. However, the role of alkali-metal cations is not well-understood. By using synchrotron-based nano-X-ray fluorescence and complementary measurements, we show that when adding RbI and/or CsI the halide distribution becomes homogenous. This homogenization translates into long-lived cha… ▽ More Perovskite solar cells have shown remarkable efficiencies beyond 22%, through organic and inorganic cation alloying. However, the role of alkali-metal cations is not well-understood. By using synchrotron-based nano-X-ray fluorescence and complementary measurements, we show that when adding RbI and/or CsI the halide distribution becomes homogenous. This homogenization translates into long-lived charge carrier decays, spatially homogenous carrier dynamics visualized by ultrafast microscopy, as well as improved photovoltaic device performance. We find that Rb and K phase-segregate in highly concentrated aggregates. Synchrotron-based X-ray-beam-induced current and electron-beam-induced current of solar cells show that Rb clusters do not contribute to the current and are recombination active. Our findings bring light to the beneficial effects of alkali metal halides in perovskites, and point at areas of weakness in the elemental composition of these complex perovskites, paving the way to improved performance in this rapidly growing family of materials for solar cell applications. △ Less

Submitted 29 April, 2018; v1 submitted 23 April, 2018; originally announced April 2018.

Comments: updated author metadata

Analyzing Solar Irradiance Variation From GPS and Cameras

Authors: Shilpa Manandhar, Soumyabrata Dev, Yee Hui Lee, Yu Song Meng

Abstract: The total amount of solar irradiance falling on the earth's surface is an important area of study amongst the photo-voltaic (PV) engineers and remote sensing analysts. The received solar irradiance impacts the total amount of generated solar energy. However, this generation is often hindered by the high degree of solar irradiance variability. In this paper, we study the main factors behind such va… ▽ More The total amount of solar irradiance falling on the earth's surface is an important area of study amongst the photo-voltaic (PV) engineers and remote sensing analysts. The received solar irradiance impacts the total amount of generated solar energy. However, this generation is often hindered by the high degree of solar irradiance variability. In this paper, we study the main factors behind such variability with the assistance of Global Positioning System (GPS) and ground-based, high-resolution sky cameras. This analysis will also be helpful for understanding cloud phenomenon and other events in the earth's atmosphere. △ Less

Submitted 19 April, 2018; originally announced April 2018.

Comments: Published in IEEE AP-S Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, 2018

On the Importance of PWV in Detecting Precipitation

Authors: Shilpa Manandhar, Soumyabrata Dev, Yee Hui Lee, Yu Song Meng

Abstract: With a rapid increase in the number of geostationary satellites around the earth's orbit, there has been a renewed interest in using Global Positioning System (GPS) to understand several phenomenon in earth's atmosphere. Such study using GPS devices are popular amongst the remote sensing community, as they provide several advantages with respect to scalability and range of applications. In this pa… ▽ More With a rapid increase in the number of geostationary satellites around the earth's orbit, there has been a renewed interest in using Global Positioning System (GPS) to understand several phenomenon in earth's atmosphere. Such study using GPS devices are popular amongst the remote sensing community, as they provide several advantages with respect to scalability and range of applications. In this paper, we discuss how GPS signals can be used to estimate the amount of water vapor in the atmosphere. Furthermore, we demonstrate the importance of such precipitable water vapor (PWV) in the atmosphere for the task of rainfall detection. We present a detailed analysis in our dataset of meteorological data of 3 years. Test dataset shows that use of PWV in rainfall detection helps to reduce the false alarm rate by almost 12%. △ Less

Submitted 19 April, 2018; originally announced April 2018.

Comments: Published in IEEE AP-S Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, 2018

Correlating Satellite Cloud Cover with Sky Cameras

Authors: Shilpa Manandhar, Soumyabrata Dev, Yee Hui Lee, Yu Song Meng

Abstract: The role of clouds is manifold in understanding the various events in the atmosphere, and also in studying the radiative balance of the earth. The conventional manner of such cloud analysis is performed mainly via satellite images. However, because of its low temporal- and spatial- resolutions, ground-based sky cameras are now getting popular. In this paper, we study the relation between the cloud… ▽ More The role of clouds is manifold in understanding the various events in the atmosphere, and also in studying the radiative balance of the earth. The conventional manner of such cloud analysis is performed mainly via satellite images. However, because of its low temporal- and spatial- resolutions, ground-based sky cameras are now getting popular. In this paper, we study the relation between the cloud cover obtained from MODIS images, with the coverage obtained from ground-based sky cameras. This will help us to better understand cloud formation in the atmosphere - both from satellite images and ground-based observations. △ Less

Submitted 24 August, 2017; originally announced September 2017.

Comments: Published in Proc. Progress In Electromagnetics Research Symposium (PIERS), 2017

Analyzing Cloud Optical Properties Using Sky Cameras

Authors: Shilpa Manandhar, Soumyabrata Dev, Yee Hui Lee, Yu Song Meng

Abstract: Clouds play a significant role in the fluctuation of solar radiation received by the earth's surface. It is important to study the various cloud properties, as it impacts the total solar irradiance falling on the earth's surface. One of such important optical properties of the cloud is the Cloud Optical Thickness (COT). It is defined with the amount of light that can pass through the clouds. The C… ▽ More Clouds play a significant role in the fluctuation of solar radiation received by the earth's surface. It is important to study the various cloud properties, as it impacts the total solar irradiance falling on the earth's surface. One of such important optical properties of the cloud is the Cloud Optical Thickness (COT). It is defined with the amount of light that can pass through the clouds. The COT values are generally obtained from satellite images. However, satellite images have a low temporal- and spatial- resolutions; and are not suitable for study in applications as solar energy generation and forecasting. Therefore, ground-based sky cameras are now getting popular in such fields. In this paper, we analyze the cloud optical thickness value, from the ground-based sky cameras, and provide future research directions. △ Less

Submitted 24 August, 2017; originally announced August 2017.

Comments: Published in Proc. Progress In Electromagnetics Research Symposium (PIERS), 2017

Nucleation of dislocations and their dynamics in layered oxides cathode materials during battery charging

Authors: A. Singer, S. Hy, M. Zhang, D. Cela, C. Fang, B. Qiu, Y. Xia, Z. Liu, A. Ulvestad, N. Hua, J. Wingert, H. Liu, M. Sprung, A. V. Zozulya, E. Maxey, R. Harder, Y. S. Meng, O. G. Shpyrko

Abstract: Defects and their interactions in crystalline solids often underpin material properties and functionality as they are decisive for stability, result in enhanced diffusion, and act as a reservoir of vacancies. Recently, lithium-rich layered oxides have emerged among the leading candidates for the next-generation energy storage cathode material, delivering 50 % excess capacity over commercially used… ▽ More Defects and their interactions in crystalline solids often underpin material properties and functionality as they are decisive for stability, result in enhanced diffusion, and act as a reservoir of vacancies. Recently, lithium-rich layered oxides have emerged among the leading candidates for the next-generation energy storage cathode material, delivering 50 % excess capacity over commercially used compounds. Oxygen-redox reactions are believed to be responsible for the excess capacity, however, voltage fading has prevented commercialization of these new materials. Despite extensive research the understanding of the mechanisms underpinning oxygen-redox reactions and voltage fade remain incomplete. Here, using operando three-dimensional Bragg coherent diffractive imaging, we directly observe nucleation of a mobile dislocation network in nanoparticles of lithium-rich layered oxide material. Surprisingly, we find that dislocations form more readily in the lithium-rich layered oxide material as compared with a conventional layered oxide material, suggesting a link between the defects and the anomalously high capacity in lithium-rich layered oxides. The formation of a network of partial dislocations dramatically alters the local lithium environment and contributes to the voltage fade. Based on our findings we design and demonstrate a method to recover the original high voltage functionality. Our findings reveal that the voltage fade in lithium-rich layered oxides is reversible and call for new paradigms for improved design of oxygen-redox active materials. △ Less

Submitted 9 June, 2017; originally announced June 2017.

Lithium Diffusion in Graphitic Carbon

Authors: Kristin Persson, Vijay A. Sethuraman, Laurence J. Hardwick, Yoyo Hinuma, Ying Shirley Meng, Anton van der Ven, Venkat Srinivasan, Robert Kostecki, Gerbrand Ceder

Abstract: Graphitic carbon is currently considered the state-of-the-art material for the negative electrode in lithium-ion cells, mainly due to its high reversibility and low operating potential. However, carbon anodes exhibit mediocre charge/discharge rate performance, which contributes to severe transport-induced surface-structural damage upon prolonged cycling, and limits the lifetime of the cell. Lithiu… ▽ More Graphitic carbon is currently considered the state-of-the-art material for the negative electrode in lithium-ion cells, mainly due to its high reversibility and low operating potential. However, carbon anodes exhibit mediocre charge/discharge rate performance, which contributes to severe transport-induced surface-structural damage upon prolonged cycling, and limits the lifetime of the cell. Lithium bulk diffusion in graphitic carbon is not yet completely understood, partly due to the complexity of measuring bulk transport properties in finite-sized, non-isotropic particles. To solve this problem for graphite, we use the Devanathan-Stachurski electrochemical methodology combined with ab-initio computations to deconvolute, and quantify the mechanism of lithium-ion diffusion in highly oriented pyrolytic graphite (HOPG). The results reveal inherent high lithium-ion diffusivity in the direction parallel to the graphene plane (ca. 10^-7 - 10^-6 cm2 s-1), as compared to sluggish lithium-ion transport along grain boundaries (ca. 10^-11 cm^2 s^-1), indicating the possibility of rational design of carbonaceous materials and composite electrodes with very high rate capability. △ Less

Submitted 2 August, 2011; originally announced August 2011.

Comments: 9 pages, 3 figures

Journal ref: Journal of Physical Chemistry Letters, 1(8), 1176-1180, 2010

Sodium Trimer Ordering on NaxCoO2 Surface

Authors: Woei Wu Pai, S. H. Huang, Ying S. Meng, Y. C. Chao, C. H. Lin, H. L. Liu, F. C. Chou

Abstract: Sodium ion ordering on in situ cleaved NaxCoO2 (x=0.84) surface has been studied by ultra high vacuum scanning tunneling microscopy (UHV-STM) at room temperature. Three main phases, with p(3x3), (root 7 x root 7), and (2 root 3 x 2 root 3) hexagonal unit cells and surface Na concentration of 1/3, 3/7, 1/2, respectively, were identified. One surprising finding is that Na trimers act as the basic… ▽ More Sodium ion ordering on in situ cleaved NaxCoO2 (x=0.84) surface has been studied by ultra high vacuum scanning tunneling microscopy (UHV-STM) at room temperature. Three main phases, with p(3x3), (root 7 x root 7), and (2 root 3 x 2 root 3) hexagonal unit cells and surface Na concentration of 1/3, 3/7, 1/2, respectively, were identified. One surprising finding is that Na trimers act as the basic building blocks that order in long range. The stability of Na trimers is attributed to the increased Na coordination with oxygen as indicated by ab initio calculations, and possibly at finite temperature by configuration entropy. △ Less

Submitted 5 May, 2008; originally announced May 2008.