Showing 1–50 of 228 results for author: Mendez, A

A meshless method to compute the proper orthogonal decomposition and its variants from scattered data

Authors: Iacopo Tirelli, Miguel Alfonso Mendez, Andrea Ianiro, Stefano Discetti

Abstract: Complex phenomena can be better understood when broken down into a limited number of simpler "components". Linear statistical methods such as the principal component analysis and its variants are widely used across various fields of applied science to identify and rank these components based on the variance they represent in the data. These methods can be seen as factorizations of the matrix colle… ▽ More Complex phenomena can be better understood when broken down into a limited number of simpler "components". Linear statistical methods such as the principal component analysis and its variants are widely used across various fields of applied science to identify and rank these components based on the variance they represent in the data. These methods can be seen as factorizations of the matrix collecting all the data, which are assumed to be a collection of time series sampled from fixed points in space. However, when data sampling locations vary over time, as with mobile monitoring stations in meteorology and oceanography or with particle tracking velocimetry in experimental fluid dynamics, advanced interpolation techniques are required to project the data onto a fixed grid before carrying out the factorization. This interpolation is often expensive and inaccurate. This work proposes a method to decompose scattered data without interpolating. The approach is based on physics-constrained radial basis function regression to compute inner products in space and time. The method provides an analytical and mesh-independent decomposition in space and time, demonstrating higher accuracy than the traditional approach. Our results show that it is possible to distill the most relevant "components" even for measurements whose natural output is a distribution of data scattered in space and time, maintaining high accuracy and mesh independence. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Multi-objective optimization of the magnetic wi** process in dip-coating

Authors: Fabio Pino, Benoit Scheid, Miguel Alfonso Mendez

Abstract: Electromagnetic wi** systems allow to pre-meter the coating thickness of the liquid metal on a moving substrate. These systems have the potential to provide a more uniform coating and significantly higher production rates compared to pneumatic wi**, but they require substantially larger amounts of energy. This work presents a multi-objective optimization accounting for (1) maximal wi** effic… ▽ More Electromagnetic wi** systems allow to pre-meter the coating thickness of the liquid metal on a moving substrate. These systems have the potential to provide a more uniform coating and significantly higher production rates compared to pneumatic wi**, but they require substantially larger amounts of energy. This work presents a multi-objective optimization accounting for (1) maximal wi** efficiency (2) maximal smoothness of the wi** meniscus, and (3) minimal Joule heating. We present the Pareto front, identifying the best wi** conditions given a set of weights for the three competing objectives. The optimization was based on a 1D steady-state integral model, whose prediction scales according to the Hartmann number (Ha). The optimization uses a multi-gradient approach, with gradients computed with a combination of finite differences and variational methods. The results show that the wi** efficiency depends solely on Ha and not the magnetic field distribution. Moreover, we show that the liquid thickness becomes insensitive to the intensity of the magnetic field above a certain threshold and that the current distribution (hence the Joule heating) is mildly affected by the magnetic field's intensity and shape. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Hardware-Efficient EMG Decoding for Next-Generation Hand Prostheses

Authors: Mohammad Kalbasi, MohammadAli Shaeri, Vincent Alexandre Mendez, Solaiman Shokur, Silvestro Micera, Mahsa Shoaran

Abstract: Advancements in neural engineering have enabled the development of Robotic Prosthetic Hands (RPHs) aimed at restoring hand functionality. Current commercial RPHs offer limited control through basic on/off commands. Recent progresses in machine learning enable finger movement decoding with higher degrees of freedom, yet the high computational complexity of such models limits their application in po… ▽ More Advancements in neural engineering have enabled the development of Robotic Prosthetic Hands (RPHs) aimed at restoring hand functionality. Current commercial RPHs offer limited control through basic on/off commands. Recent progresses in machine learning enable finger movement decoding with higher degrees of freedom, yet the high computational complexity of such models limits their application in portable devices. Future RPH designs must balance portability, low power consumption, and high decoding accuracy to be practical for individuals with disabilities. To this end, we introduce a novel attractor-based neural network to realize on-chip movement decoding for next-generation portable RPHs. The proposed architecture comprises an encoder, an attention layer, an attractor network, and a refinement regressor. We tested our model on four healthy subjects and achieved a decoding accuracy of 80.3%. Our proposed model is over 120 and 50 times more compact compared to state-of-the-art LSTM and CNN models, respectively, with comparable (or superior) decoding accuracy. Therefore, it exhibits minimal hardware complexity and can be effectively integrated as a System-on-Chip. △ Less

Submitted 31 May, 2024; v1 submitted 30 May, 2024; originally announced May 2024.

Comments: \{copyright} 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works

Speckle Interferometry at SOAR in 2023

Authors: Andrei Tokovinin, Brian D. Mason, Rene A. Mendez, Edgardo Costa

Abstract: Results of the speckle-interferometry observations at the 4.1 m Southern Astrophysical Research Telescope (SOAR) obtained during 2023 are presented: 1913 measurements of 1533 resolved pairs or subsystems (median separation 0.16") and non-resolutions of 552 targets; 42 pairs are resolved here for the first time. This work continues our long-term effort to monitor orbital motion in close binaries an… ▽ More Results of the speckle-interferometry observations at the 4.1 m Southern Astrophysical Research Telescope (SOAR) obtained during 2023 are presented: 1913 measurements of 1533 resolved pairs or subsystems (median separation 0.16") and non-resolutions of 552 targets; 42 pairs are resolved here for the first time. This work continues our long-term effort to monitor orbital motion in close binaries and hierarchical systems. A large number (147) of orbits have been determined for the first time or updated using these measurements. Complementarity of this program with the Gaia mission is highlighted. △ Less

Submitted 16 May, 2024; originally announced May 2024.

Comments: Accepted by The Astronomical Journal. 17 pages, 5 Figures, 6 Tables. The tables of measurements can be downloaded from https://www.ctio.noirbab.edu/~atokovin/papers/soardata-2024.tar.gz

A meshless and binless approach to compute statistics in 3D Ensemble PTV

Authors: Manuel Ratz, Miguel A. Mendez

Abstract: We propose a method to obtain superresolution of turbulent statistics for three-dimensional ensemble particle tracking velocimetry (EPTV). The method is ''meshless'' because it does not require the definition of a grid for computing derivatives, and it is ''binless'' because it does not require the definition of bins to compute local statistics. The method combines the constrained radial basis fun… ▽ More We propose a method to obtain superresolution of turbulent statistics for three-dimensional ensemble particle tracking velocimetry (EPTV). The method is ''meshless'' because it does not require the definition of a grid for computing derivatives, and it is ''binless'' because it does not require the definition of bins to compute local statistics. The method combines the constrained radial basis function (RBF) formalism introduced Sperotto et al. (Meas Sci Technol, 33:094005, 2022) with a kernel estimate approach for the ensemble averaging of the RBF regressions. The computational cost for the RBF regression is alleviated using the partition of unity method (PUM). Three test cases are considered: (1) a 1D illustrative problem on a Gaussian process, (2) a 3D synthetic test case reproducing a 3D jet-like flow, and (3) an experimental dataset collected for an underwater jet flow at $\text{Re} = 6750$ using a four-camera 3D PTV system. For each test case, the method performances are compared to traditional binning approaches such as Gaussian weighting (Agüí and Jiménez, JFM, 185:447-468, 1987), local polynomial fitting (Agüera et al, Meas Sci Technol, 27:124011, 2016), as well as a binned version of the RBF statistics. △ Less

Submitted 18 March, 2024; originally announced March 2024.

Comments: 21 pages, 13 figures, submitted to: Experiments in Fluids

The IAEA electronic stop** power database: modernization, review, and analysis of the existing experimental data

Authors: C. C. Montanari, P. Dimitriou, L. Marian, A. M. P. Mendez, J. P. Peralta, F. Bivort-Haiek

Abstract: We review the electronic stop** power data within the IAEA database, assessing the abundance and scarcity of available data as a function of energy and collisional systems. Our analysis includes an examination of the experimental values, their evolution in time, the dispersion among data, and trends of the more recent measurements. Additionally, we provide comparisons with SRIM-2013 calculations… ▽ More We review the electronic stop** power data within the IAEA database, assessing the abundance and scarcity of available data as a function of energy and collisional systems. Our analysis includes an examination of the experimental values, their evolution in time, the dispersion among data, and trends of the more recent measurements. Additionally, we provide comparisons with SRIM-2013 calculations for select cases of interest. Notably, we identify sparsely measured systems and energy regions, emphasizing the pressing need for new, reliable data and independent theoretical predictions. △ Less

Submitted 19 March, 2024; v1 submitted 5 February, 2024; originally announced February 2024.

Relativistic effects on stop** power of plasmas with heavy ions

Authors: A. M. P. Mendez, J. Chacón-Gijón, J. Vázquez-Moyano, M. D. Barriga-Carrasco

Abstract: This work investigates the electronic stop** power for protons of a tungsten plasma at various electron densities and temperatures. The study employs a dielectric formalism to model the stop** power due to free and bound electrons, considering relativistic and non-relativistic effects. The bound electron stop** power is modeled using the shellwise local plasma approximation (SLPA) introduced… ▽ More This work investigates the electronic stop** power for protons of a tungsten plasma at various electron densities and temperatures. The study employs a dielectric formalism to model the stop** power due to free and bound electrons, considering relativistic and non-relativistic effects. The bound electron stop** power is modeled using the shellwise local plasma approximation (SLPA) introduced by Montanari and Miraglia. The ionization state of the plasma is also examined, revealing its impact on the bound electron contribution. We compare our results with the T-Matrix approach and the Li-Petrasso model for free electrons in combination with SLPA calculations for the bound electron ones. Results demonstrate the significance of bound electron stop** power, particularly for plasma with high-Z ions. This investigation contributes valuable insights into plasma physics and fusion energy research, providing essential data for future experiments and simulations. △ Less

Submitted 29 January, 2024; originally announced January 2024.

An extension of the compound flow theory with shear and friction

Authors: Jan Van den Berghe, Miguel Alfonso Mendez, Yann Bartosiewicz

Abstract: Compound flows consist of two or more parallel compressible streams inside a duct. Its theoretical treatment has recently been applied to model ejectors, but also to post-process and to interpret CFD results. More precisely, it has been observed that compound flows can choke upstream of the geometrical throat. While it is widely known that friction can push the sonic section downstream, no mechani… ▽ More Compound flows consist of two or more parallel compressible streams inside a duct. Its theoretical treatment has recently been applied to model ejectors, but also to post-process and to interpret CFD results. More precisely, it has been observed that compound flows can choke upstream of the geometrical throat. While it is widely known that friction can push the sonic section downstream, no mechanism has been identified to explain the movement in the opposite direction. In this work, we extend the existing compound flow theory with shear and friction. The resulting model captures the up- and downstream movement of the sonic section. We show analytically that shear between the streams is the driving force behind the upstream movement by analysing the singularity of the governing equations in the sonic section. Additionally, we provide a quasi-third order approximation of the governing equations in the vicinity of the sonic section to alleviate potential numerical issues. Finally, we compare the predictions of the model with post-processed CFD results of a compound nozzle. We study the individual effects of shear and friction through an inviscid simulation for the isentropic case and a viscid simulation with a slip or no-slip condition at the wall to include shear with or without friction. The proposed extension offers new possibilities in modelling and analysis of compound flows. △ Less

Submitted 14 January, 2024; originally announced January 2024.

Comments: 20 pages, 6 figures, to be submitted to Journal of Fluid Mechanics

Absolute and convective instabilities in a liquid film over a substrate moving against gravity

Authors: Fabio Pino, Miguel Alfonso Mendez, Benoit Scheid

Abstract: The drag-out problem for small Reynolds numbers (Re) admits the Landau-Levich-Derjaguin (LLD) solution for small capillary numbers (Ca), and Derjaguin's solution for large Ca. We investigate whether these solutions are absolutely or convectively unstable, solving the Orr-Sommerfeld eigenvalue problem. For Derjaguin's solution, we show that the instability is unconditionally convective for Kapitza… ▽ More The drag-out problem for small Reynolds numbers (Re) admits the Landau-Levich-Derjaguin (LLD) solution for small capillary numbers (Ca), and Derjaguin's solution for large Ca. We investigate whether these solutions are absolutely or convectively unstable, solving the Orr-Sommerfeld eigenvalue problem. For Derjaguin's solution, we show that the instability is unconditionally convective for Kapitza number (Ka) smaller than 17 and becomes absolute for Ka>0.15 and Re^(1.7) for Re>10. For water (Ka=3400), the LLD solution is always convectively unstable. The absolute instability is observed only when the dip-coated film is additionally fed from above. △ Less

Submitted 22 December, 2023; originally announced December 2023.

Current status of the Extension of the FRIPON network in Chile

Authors: Felipe Gutiérrez Rojas, Sébastien Bouquillon, Rene A. Mendez, Hernan Pulgar, Marcelo Tala Pinto, Katherine Vieira, Millarca Valenzuela Picón, Andrés Jordán, Christian H. R. Nitschelm, Massinissa Hadjara, José Luis Nilo Castellón, Maja Vuckovic, Hebe Cremades, Bin Yang, Adrien Malgoyre, Colas Francois, Pierre Vernazza, Pierre Bourget, Emmanuel Jehin, Alain Klotz

Abstract: FRIPON is an efficient ground-based network for the detection and characterization of fireballs, which was initiated in France in 2016 with over one hundred cameras and which has been very successfully extended to Europe and Canada with one hundred more stations. After seven successful years of operation in the northern hemisphere, it seems necessary to extend this network towards the southern hem… ▽ More FRIPON is an efficient ground-based network for the detection and characterization of fireballs, which was initiated in France in 2016 with over one hundred cameras and which has been very successfully extended to Europe and Canada with one hundred more stations. After seven successful years of operation in the northern hemisphere, it seems necessary to extend this network towards the southern hemisphere - where the lack of detection is evident - to obtain an exhaustive view of fireball activity. The task of extending the network to any region outside the northern hemisphere presents the challenge of a new installation process, where the recommended and tested version of the several sub-systems that compose a station had to be replaced due to regional availability and compatibility considerations, as well as due to constant software and hardware obsolescence and updates. In Chile, we have a unique geography, with a vast extension in latitude, as well as desert regions, which have generated the need to evaluate the scientific and technical performance of the network under special conditions, prioritizing the optimization of a set of factors related to the deployment process, as well as the feasible and achievable versions of the required components, the geographical location of the stations, and their respective operational, maintenance, safety, and communication conditions. In this talk, we will present the current status of this effort, including a brief report on the obstacles and difficulties encountered and how we have solved them, the current operational status of the network in Northern Chile, as well as the challenges and prospects for the densification of the network over South America. △ Less

Submitted 20 December, 2023; originally announced December 2023.

Comments: 4 pages, 2 figures, International Meteor Conference proceedings

Characterization of a capillary driven flow in microgravity by means of optical technique

Authors: Domenico Fiorini, Louis Carbonnelle, Alessia Simonini, Johan Steelant, David Seveno, Miguel A. Mendez

Abstract: The motion of a gas-liquid interface along a solid wall is influenced by the capillary forces resulting from the interface's shape and its interaction with the solid, where it forms a dynamic contact angle. Capillary models play a significant role in the management of cryogenic propellants in space, where surface tension dominates the behaviour of gas-liquid interfaces. Yet, most empirical models… ▽ More The motion of a gas-liquid interface along a solid wall is influenced by the capillary forces resulting from the interface's shape and its interaction with the solid, where it forms a dynamic contact angle. Capillary models play a significant role in the management of cryogenic propellants in space, where surface tension dominates the behaviour of gas-liquid interfaces. Yet, most empirical models have been derived in configurations dominated by viscous forces. In this study, we experimentally investigate the wetting of a low-viscosity, highly wetting fluid in a reduced gravity environment. Our setup consisted of a transparent and diverging U-tube in which capillary forces sustain the liquid motion. Combining Particle Image Velocimetry (PIV) and high-speed backlighting visualization, the experimental campaign allowed for measuring the interface evolution and the velocity field within the liquid under varying gravity levels. This work reports on the preliminary results from the image velocimetry and shows that the velocity profile within the tube is close to parabolic until a short distance from the interface. Nevertheless, classic 1D models for capillary rise face difficulties reproducing the interface dynamics, suggesting that the treatment of the surface tension in these problems must be reviewed. △ Less

Submitted 6 December, 2023; originally announced December 2023.

Journal ref: Multiphase Science and Technology 35, no. 3 (2023)

Capillary driven flows in microgravity

Authors: Domenico Fiorini, Alessia Simonini, Johan Steelant, David Seveno, Miguel A. Mendez

Abstract: This work investigates the capillary rise dynamics of highly wetting liquids in a divergent U-tube in the microgravity conditions provided by 78th European Space Agency (ESA) parabolic flight. This configuration produces a capillary-driven channel flow. We use image recording in backlight illumination to characterize the interface dynamics and dynamic contact angle of HFE7200 and Di-Propylene Glyc… ▽ More This work investigates the capillary rise dynamics of highly wetting liquids in a divergent U-tube in the microgravity conditions provided by 78th European Space Agency (ESA) parabolic flight. This configuration produces a capillary-driven channel flow. We use image recording in backlight illumination to characterize the interface dynamics and dynamic contact angle of HFE7200 and Di-Propylene Glycol (DPG). For the case of HF7200, we complement the interface measurements with Particle Tracking Velocimetry (PTV) to characterize the velocity fields underneath the moving meniscus. In the experiments with DPG, the liquid column reaches different heights within various experiments, and the measurements show a sharp reduction of the meniscus curvature when the contact line moves from a pre-wet to a dry substrate. In experiments with HFE7200, the interface always moves on a pre-wet surface. Yet a curvature reduction is observed due to the inertial forces on the underlying accelerating flow. The PTV measurements show that the distance from the interface within which the velocity profile adapts to the meniscus velocity shortens as the interface acceleration increases. △ Less

Submitted 25 April, 2024; v1 submitted 5 December, 2023; originally announced December 2023.

Optimal photometry of point sources: Joint source flux and background determination on array detectors -- from theory to practical implementation

Authors: Mario L. Vicuña, Jorge F. Silva, Rene A. Mendez, Marcos E. Orchard, Sebastian Espinosa, Jeremy Tregloan-Reed

Abstract: In this paper we study the joint determination of source and background flux for point sources as observed by digital array detectors. We explicitly compute the two-dimensional Cramér-Rao absolute lower bound (CRLB) as well as the performance bounds for high-dimensional implicit estimators from a generalized Taylor expansion. This later approach allows us to obtain computable prescriptions for the… ▽ More In this paper we study the joint determination of source and background flux for point sources as observed by digital array detectors. We explicitly compute the two-dimensional Cramér-Rao absolute lower bound (CRLB) as well as the performance bounds for high-dimensional implicit estimators from a generalized Taylor expansion. This later approach allows us to obtain computable prescriptions for the bias and variance of the joint estimators. We compare these prescriptions with empirical results from numerical simulations in the case of the weighted least squares estimator (introducing an improved version, denoted stochastic weighted least-squares) as well as with the maximum likelihood estimator, finding excellent agreement. We demonstrate that these estimators provide quasi-unbiased joint estimations of the flux and background, with a variance that approaches the CRLB very tightly and are, hence, optimal, unlike the case of sequential estimation used commonly in astronomical photometry which is sub-optimal. We compare our predictions with numerical simulations of realistic observations, as well as with observations of a bona-fide non-variable stellar source observed with TESS, and compare it to the results from the sequential estimation of background and flux, confirming our theoretical expectations. Our practical estimators can be used as benchmarks for general photometric pipelines, or for applications that require maximum precision and accuracy in absolute photometry. △ Less

Submitted 20 November, 2023; originally announced November 2023.

Comments: Accepted by PASP. 35 pages, 12 figures, 5 appendices

Reinforcement Twinning: from digital twins to model-based reinforcement learning

Authors: Lorenzo Schena, Pedro Marques, Romain Poletti, Samuel Ahizi, Jan Van den Berghe, Miguel A. Mendez

Abstract: Digital twins promise to revolutionize engineering by offering new avenues for optimization, control, and predictive maintenance. We propose a novel framework for simultaneously training the digital twin of an engineering system and an associated control agent. The twin's training combines adjoint-based data assimilation and system identification methods, while the control agent's training merges… ▽ More Digital twins promise to revolutionize engineering by offering new avenues for optimization, control, and predictive maintenance. We propose a novel framework for simultaneously training the digital twin of an engineering system and an associated control agent. The twin's training combines adjoint-based data assimilation and system identification methods, while the control agent's training merges model-based optimal control with model-free reinforcement learning. The control agent evolves along two independent paths: one driven by model-based optimal control and the other by reinforcement learning. The digital twin serves as a virtual environment for confrontation and indirect interaction, functioning as an "expert demonstrator." The best policy is selected for real-world interaction and cloned to the other path if training stagnates. We call this framework Reinforcement Twinning (RT). The framework is tested on three diverse engineering systems and control tasks: (1) controlling a wind turbine under varying wind speeds, (2) trajectory control of flap**-wing micro air vehicles (FWMAVs) facing wind gusts, and (3) mitigating thermal loads in managing cryogenic storage tanks. These test cases use simplified models with known ground truth closure laws. Results show that the adjoint-based digital twin training is highly sample-efficient, completing within a few iterations. For the control agent training, both model-based and model-free approaches benefit from their complementary learning experiences. The promising results pave the way for implementing the RT framework on real systems. △ Less

Submitted 11 July, 2024; v1 submitted 6 November, 2023; originally announced November 2023.

Comments: submitted Journal of Computational Science

Real-time data assimilation for the thermodynamic modeling of cryogenic storage tanks

Authors: Pedro Afonso Marques, Samuel Ahizi, Miguel Alfonso Mendez

Abstract: The thermal management of cryogenic storage tanks requires advanced control strategies to minimize the boil-off losses produced by heat leakages and sloshing-enhanced heat and mass transfer. This work presents a data-assimilation approach to calibrate a 0D thermodynamic model for cryogenic fuel tanks from data collected in real time from multiple tanks. The model combines energy and mass balance b… ▽ More The thermal management of cryogenic storage tanks requires advanced control strategies to minimize the boil-off losses produced by heat leakages and sloshing-enhanced heat and mass transfer. This work presents a data-assimilation approach to calibrate a 0D thermodynamic model for cryogenic fuel tanks from data collected in real time from multiple tanks. The model combines energy and mass balance between three control volumes (the ullage vapor, the liquid, and the solid tank) with an Artificial Neural Network (ANN) for predicting the heat transfer coefficients from the current tank state. The proposed approach combines ideas from traditional data assimilation and multi-environment reinforcement learning, where an agent's training (model assimilation) is carried out simultaneously on multiple environments (systems). The real-time assimilation uses a mini-batch version of the Limited-memory Broyden-Fletcher-Goldfarb-Shanno with bounds (L-BFGS-B) and adjoint-based gradient computation for solving the underlying optimization problem. The approach is tested on synthetic datasets simulating multiple tanks undergoing different operation phases (pressurization, hold, long-term storage, and sloshing). The results show that the assimilation is robust against measurement noise and uses it to explore the parameter space further. Moreover, we show that sampling from multiple environments simultaneously accelerates the assimilation. △ Less

Submitted 20 October, 2023; v1 submitted 17 October, 2023; originally announced October 2023.

Comments: 21 pages, 18 figures, preprint submitted to Energy

Dynamic wetting experiment with nitrogen in a quasi-capillary tube

Authors: Domenico Fiorini, Alessia Simonini, Johan Steelant, David Seveno, Miguel Alfonso Mendez

Abstract: This work investigates the wetting dynamics of cryogenic fluids in inertia-dominated conditions. We experimentally characterized an oscillating gas-liquid interface of liquid nitrogen in a partially filled U-shaped quartz tube. The experiments were carried out in controlled cryogenic conditions, with interface oscillations produced by releasing the liquid column from an unbalanced position and hav… ▽ More This work investigates the wetting dynamics of cryogenic fluids in inertia-dominated conditions. We experimentally characterized an oscillating gas-liquid interface of liquid nitrogen in a partially filled U-shaped quartz tube. The experiments were carried out in controlled cryogenic conditions, with interface oscillations produced by releasing the liquid column from an unbalanced position and having nitrogen vapor as the only ullage gas. During the experiments, the interface shape was tracked via image processing and used to fit a model from which the contact angle could be accurately determined. The results show that the dynamic contact angle evolution in advancing conditions is linearly linked to the Capillary number, with a slope depending on whether the interface moves over a dry or a pre-wet surface. However, the contact angle remains close to the one at equilibrium in receding conditions. To analyze the relation between contact angle and interface dynamics, we define an equivalent contact angle as the one that would make a spherical interface produce the same capillary pressure drop as the actual interface shape. The evolution of this equivalent contact angle proved to be independent of the evolution of the actual one, suggesting that the interface shape is not influenced by it. Finally, a theoretical analysis of the interface motion using a simplified model shows that viscous forces dominate the dam** of the interface for small tube sizes, while gravity and inertial forces dominate the oscillating dynamics of the liquid column for larger tubes. △ Less

Submitted 9 October, 2023; originally announced October 2023.

Comments: 13 pages, 26 pdf figure files grouped in 8 figures

Soda: An Object-Oriented Functional Language for Specifying Human-Centered Problems

Authors: Julian Alfredo Mendez

Abstract: We present Soda (Symbolic Objective Descriptive Analysis), a language that helps to treat qualities and quantities in a natural way and greatly simplifies the task of checking their correctness. We present key properties for the language motivated by the design of a descriptive language to encode complex requirements on computer systems, and we explain how these key properties must be addressed to… ▽ More We present Soda (Symbolic Objective Descriptive Analysis), a language that helps to treat qualities and quantities in a natural way and greatly simplifies the task of checking their correctness. We present key properties for the language motivated by the design of a descriptive language to encode complex requirements on computer systems, and we explain how these key properties must be addressed to model these requirements with simple definitions. We give an overview of a tool that helps to describe problems in an easy way that we consider more transparent and less error-prone. △ Less

Submitted 3 October, 2023; originally announced October 2023.

Comments: https://julianmendez.github.io/soda

On the coupling instability of a gas jet im**ing on a liquid film

Authors: David Barreiro-Villaverde, Anne Gosset, Marcos Lema, Miguel A. Mendez

Abstract: We investigate the dynamics of a gas jet im**ing on a thin liquid film. This configuration is relevant to the jet-wi** process and is unstable. In particular, we complement previous works that focused on the wi** of liquids with low Kapitza numbers (highly viscous liquids) by numerically analyzing the wi** of liquids with much higher Kapitza numbers, more relevant to industrial processes.… ▽ More We investigate the dynamics of a gas jet im**ing on a thin liquid film. This configuration is relevant to the jet-wi** process and is unstable. In particular, we complement previous works that focused on the wi** of liquids with low Kapitza numbers (highly viscous liquids) by numerically analyzing the wi** of liquids with much higher Kapitza numbers, more relevant to industrial processes. The simulations are carried out by combining Volume of Fluid (VOF) and Large Eddy Simulation (LES), and the dynamics of the gas-liquid interaction is analyzed using extended multiscale Proper Orthogonal Decomposition (emPOD). The resolution and flow details captured by the simulations are unprecedented. The results show that, despite the vastly different wi** conditions, the dynamics of the gas-liquid interaction is remarkably similar. This opens new avenues to the study and the scaling of the jet-wi** process. △ Less

Submitted 27 September, 2023; originally announced September 2023.

Mass ratio of single-line spectroscopic binaries with visual orbits using Bayesian inference and suitable priors

Authors: Jennifer Anguita-Aguero, Rene A. Mendez, Miguel Videla, Edgardo Costa, Leonardo Vanzi, Nicolas Castro-Morales, Camila Caballero-Valdes

Abstract: We present orbital elements for twenty-two single-line binaries, nine of them studied for the first time, determined from a joint spectroscopic and astrometric solution. The astrometry is based on interferometric measurements obtained with the HRCam Speckle camera on the SOAR 4.1m telescope at Cerro Pachon, Chile, supplemented with historical data. The spectroscopic observations were secured using… ▽ More We present orbital elements for twenty-two single-line binaries, nine of them studied for the first time, determined from a joint spectroscopic and astrometric solution. The astrometry is based on interferometric measurements obtained with the HRCam Speckle camera on the SOAR 4.1m telescope at Cerro Pachon, Chile, supplemented with historical data. The spectroscopic observations were secured using Echelle spectrographs (FEROS, FIDEOS and HARPS) at La Silla, Chile. A comparison of our orbital elements and systemic velocities with previous studies, including Gaia radial velocities, show the robustness of our estimations. By adopting suitable priors of the trigonometric parallax and spectral type of the primary component, and using a Bayesian inference methodology developed by our group, we were able to estimate mass ratios for these binaries. Combining the present results with a previous study of other single-line from our team we present a pseudo mass-to-luminosity relationship based on twenty three systems (45 stars) in the mass range 0.6 <= M_Sun <= 2.5. We find a reasonable correspondence with a fiducial mass-to-luminosity relationship. We conclude that our methodology does allow to derive tentative mass ratios for this type of binaries. △ Less

Submitted 12 September, 2023; originally announced September 2023.

Comments: 27 pages, 11 figures, 5 tables. Accepted by The Astronomical Journal

Systematically Detecting Packet Validation Vulnerabilities in Embedded Network Stacks

Authors: Paschal C. Amusuo, Ricardo Andrés Calvo Méndez, Zhongwei Xu, Aravind Machiry, James C. Davis

Abstract: Embedded Network Stacks (ENS) enable low-resource devices to communicate with the outside world, facilitating the development of the Internet of Things and Cyber-Physical Systems. Some defects in ENS are thus high-severity cybersecurity vulnerabilities: they are remotely triggerable and can impact the physical world. While prior research has shed light on the characteristics of defects in many cla… ▽ More Embedded Network Stacks (ENS) enable low-resource devices to communicate with the outside world, facilitating the development of the Internet of Things and Cyber-Physical Systems. Some defects in ENS are thus high-severity cybersecurity vulnerabilities: they are remotely triggerable and can impact the physical world. While prior research has shed light on the characteristics of defects in many classes of software systems, no study has described the properties of ENS defects nor identified a systematic technique to expose them. The most common automated approach to detecting ENS defects is feedback-driven randomized dynamic analysis ("fuzzing"), a costly and unpredictable technique. This paper provides the first systematic characterization of cybersecurity vulnerabilities in ENS. We analyzed 61 vulnerabilities across 6 open-source ENS. Most of these ENS defects are concentrated in the transport and network layers of the network stack, require reaching different states in the network protocol, and can be triggered by only 1-2 modifications to a single packet. We therefore propose a novel systematic testing framework that focuses on the transport and network layers, uses seeds that cover a network protocol's states, and systematically modifies packet fields. We evaluated this framework on 4 ENS and replicated 12 of the 14 reported IP/TCP/UDP vulnerabilities. On recent versions of these ENSs, it discovered 7 novel defects (6 assigned CVES) during a bounded systematic test that covered all protocol states and made up to 3 modifications per packet. We found defects in 3 of the 4 ENS we tested that had not been found by prior fuzzing research. Our results suggest that fuzzing should be deferred until after systematic testing is employed. △ Less

Submitted 21 August, 2023; originally announced August 2023.

Comments: 12 pages, 3 figures, to be published in the 38th IEEE/ACM International Conference on Automated Software Engineering (ASE 2023)

ACM Class: D.2.5

A large topographic feature on the surface of the trans-Neptunian object (307261) 2002 MS$_4$ measured from stellar occultations

Authors: F. L. Rommel, F. Braga-Ribas, J. L. Ortiz, B. Sicardy, P. Santos-Sanz, J. Desmars, J. I. B. Camargo, R. Vieira-Martins, M. Assafin, B. E. Morgado, R. C. Boufleur, G. Benedetti-Rossi, A. R. Gomes-Júnior, E. Fernández-Valenzuela, B. J. Holler, D. Souami, R. Duffard, G. Margoti, M. Vara-Lubiano, J. Lecacheux, J. L. Plouvier, N. Morales, A. Maury, J. Fabrega, P. Ceravolo , et al. (179 additional authors not shown)

Abstract: This work aims at constraining the size, shape, and geometric albedo of the dwarf planet candidate 2002 MS4 through the analysis of nine stellar occultation events. Using multichord detection, we also studied the object's topography by analyzing the obtained limb and the residuals between observed chords and the best-fitted ellipse. We predicted and organized the observational campaigns of nine st… ▽ More This work aims at constraining the size, shape, and geometric albedo of the dwarf planet candidate 2002 MS4 through the analysis of nine stellar occultation events. Using multichord detection, we also studied the object's topography by analyzing the obtained limb and the residuals between observed chords and the best-fitted ellipse. We predicted and organized the observational campaigns of nine stellar occultations by 2002 MS4 between 2019 and 2022, resulting in two single-chord events, four double-chord detections, and three events with three to up to sixty-one positive chords. Using 13 selected chords from the 8 August 2020 event, we determined the global elliptical limb of 2002 MS4. The best-fitted ellipse, combined with the object's rotational information from the literature, constrains the object's size, shape, and albedo. Additionally, we developed a new method to characterize topography features on the object's limb. The global limb has a semi-major axis of 412 $\pm$ 10 km, a semi-minor axis of 385 $\pm$ 17 km, and the position angle of the minor axis is 121 $^\circ$ $\pm$ 16$^\circ$. From this instantaneous limb, we obtained 2002 MS4's geometric albedo and the projected area-equivalent diameter. Significant deviations from the fitted ellipse in the northernmost limb are detected from multiple sites highlighting three distinct topographic features: one 11 km depth depression followed by a 25$^{+4}_{-5}$ km height elevation next to a crater-like depression with an extension of 322 $\pm$ 39 km and 45.1 $\pm$ 1.5 km deep. Our results present an object that is $\approx$138 km smaller in diameter than derived from thermal data, possibly indicating the presence of a so-far unknown satellite. However, within the error bars, the geometric albedo in the V-band agrees with the results published in the literature, even with the radiometric-derived albedo. △ Less

Submitted 23 August, 2023; v1 submitted 15 August, 2023; originally announced August 2023.

Journal ref: A&A 678, A167 (2023)

Well-posedness for the extended Schrödinger-Benjamin-Ono system

Authors: Felipe Linares, Argenis Mendez, Didier Pilod

Abstract: In this work we prove that the initial value problem associated to the Schrödinger-Benjamin-Ono type system \begin{equation*} \left\{ \begin{array}{ll} \mathrm{i}\partial_{t}u+ \partial_{x}^{2} u= uv+ βu|u|^{2}, \partial_{t}v-\mathcal{H}_{x}\partial_{x}^{2}v+ ρv\partial_{x}v=\partial_{x}\left(|u|^{2}\right) u(x,0)=u_{0}(x), \quad v(x,0)=v_{0}(x), \end{array} \right. \end{equation*} with… ▽ More In this work we prove that the initial value problem associated to the Schrödinger-Benjamin-Ono type system \begin{equation*} \left\{ \begin{array}{ll} \mathrm{i}\partial_{t}u+ \partial_{x}^{2} u= uv+ βu|u|^{2}, \partial_{t}v-\mathcal{H}_{x}\partial_{x}^{2}v+ ρv\partial_{x}v=\partial_{x}\left(|u|^{2}\right) u(x,0)=u_{0}(x), \quad v(x,0)=v_{0}(x), \end{array} \right. \end{equation*} with $β,ρ\in \mathbb{R}$ is locally well-posed for initial data $(u_{0},v_{0})\in H^{s+\frac12}(\mathbb{R})\times H^{s}(\mathbb{R})$ for $s>\frac54$. Our method of proof relies on energy methods and compactness arguments. However, due to the lack of symmetry of the nonlinearity, the usual energy has to be modified to cancel out some bad terms appearing in the estimates. Finally, in order to lower the regularity below the Sobolev threshold $s=\frac32$, we employ a refined Strichartz estimate introduced in the Benjamin-Ono setting by Koch and Tzvetkov, and further developed by Kenig and Koenig. △ Less

Submitted 4 August, 2023; originally announced August 2023.

Comments: 22 pages, to appear in Vietnam Journal of Mathematics

MSC Class: 35Q53; 35Q05

Robotic Manipulation Datasets for Offline Compositional Reinforcement Learning

Authors: Marcel Hussing, Jorge A. Mendez, Anisha Singrodia, Cassandra Kent, Eric Eaton

Abstract: Offline reinforcement learning (RL) is a promising direction that allows RL agents to pre-train on large datasets, avoiding the recurrence of expensive data collection. To advance the field, it is crucial to generate large-scale datasets. Compositional RL is particularly appealing for generating such large datasets, since 1) it permits creating many tasks from few components, 2) the task structure… ▽ More Offline reinforcement learning (RL) is a promising direction that allows RL agents to pre-train on large datasets, avoiding the recurrence of expensive data collection. To advance the field, it is crucial to generate large-scale datasets. Compositional RL is particularly appealing for generating such large datasets, since 1) it permits creating many tasks from few components, 2) the task structure may enable trained agents to solve new tasks by combining relevant learned components, and 3) the compositional dimensions provide a notion of task relatedness. This paper provides four offline RL datasets for simulated robotic manipulation created using the 256 tasks from CompoSuite [Mendez et al., 2022a]. Each dataset is collected from an agent with a different degree of performance, and consists of 256 million transitions. We provide training and evaluation settings for assessing an agent's ability to learn compositional task policies. Our benchmarking experiments on each setting show that current offline RL methods can learn the training tasks to some extent and that compositional methods significantly outperform non-compositional methods. However, current methods are still unable to extract the tasks' compositional structure to generalize to unseen tasks, showing a need for further research in offline compositional RL. △ Less

Submitted 13 July, 2023; originally announced July 2023.

The Gaia alerted fading of the FUor-type star Gaia21elv

Authors: Zsófia Nagy, Sunkyung Park, Péter Ábrahám, Ágnes Kóspál, Fernando Cruz-Sáenz de Miera, Mária Kun, Michał Siwak, Zsófia Marianna Szabó, Máté Szilágyi, Eleonora Fiorellino, Teresa Giannini, Jae-Joon Lee, Jeong-Eun Lee, Gábor Marton, László Szabados, Fabrizio Vitali, Jan Andrzejewski, Mariusz Gromadzki, Simon Hodgkin, Maja Jabłońska, Rene A. Mendez, Jaroslav Merc, Olga Michniewicz, Przemysław J. Mikołajczyk, Uliana Pylypenko , et al. (4 additional authors not shown)

Abstract: FU Orionis objects (FUors) are eruptive young stars, which exhibit outbursts that last from decades to a century. Due to the duration of their outbursts, and to the fact that only about two dozens of such sources are known, information on the end of their outbursts is limited. Here we analyse follow-up photometry and spectroscopy of Gaia21elv, a young stellar object, which had a several decades lo… ▽ More FU Orionis objects (FUors) are eruptive young stars, which exhibit outbursts that last from decades to a century. Due to the duration of their outbursts, and to the fact that only about two dozens of such sources are known, information on the end of their outbursts is limited. Here we analyse follow-up photometry and spectroscopy of Gaia21elv, a young stellar object, which had a several decades long outburst. It was reported as a Gaia science alert due to its recent fading by more than a magnitude. To study the fading of the source and look for signatures characteristic of FUors, we have obtained follow-up near infrared (NIR) spectra using Gemini South/IGRINS, and both optical and NIR spectra using VLT/X-SHOOTER. The spectra at both epochs show typical FUor signatures, such as a triangular shaped $H$-band continuum, absorption-line dominated spectrum, and P Cygni profiles. In addition to the typical FUor signatures, [OI], [FeII], and [SII] were detected, suggesting the presence of a jet or disk wind. Fitting the spectral energy distributions with an accretion disc model suggests a decrease of the accretion rate between the brightest and faintest states. The rapid fading of the source in 2021 was most likely dominated by an increase of circumstellar extinction. The spectroscopy presented here confirms that Gaia21elv is a classical FUor, the third such object discovered among the Gaia science alerts. △ Less

Submitted 4 July, 2023; originally announced July 2023.

Comments: Accepted to MNRAS

Extensions to the Guaranteed Service Model for Industrial Applications of Multi-Echelon Inventory Optimization

Authors: Victoria G. Achkar, Braulio B. Brunaud, Hector D. Perez, Rami Musa, Carlos A. Mendez, Ignacio E. Grossmann

Abstract: Multi-echelon inventory optimization (MEIO) plays a key role in a supply chain seeking to achieve specified customer service levels with a minimum capital in inventory. In this work, we propose a generalized MEIO model based on the Guaranteed Service approach to allocate safety stock levels across the network at the lowest holding cost. This model integrates several existing and some novel feature… ▽ More Multi-echelon inventory optimization (MEIO) plays a key role in a supply chain seeking to achieve specified customer service levels with a minimum capital in inventory. In this work, we propose a generalized MEIO model based on the Guaranteed Service approach to allocate safety stock levels across the network at the lowest holding cost. This model integrates several existing and some novel features that are usually present in pharmaceutical multi-echelon supply chains into a single model: review periods, manufacturing facilities, hybrid nodes (nodes with both internal and external demand), minimum order quantities (MOQ), and different service level performance indicators (fill rate and cycle service levels). We include a polynomial regression to approximate fill rates as a possible target measure to set safety stocks. To improve efficiency, we propose a nonlinear programming model to support decision making, which can be reformulated as a Quadratically Constrained Program (QCP), which leads to order of magnitude reductions in computational time. The performance of the model is evaluated by solving illustrative and real-world cases, and is validated with simulation. △ Less

Submitted 19 June, 2023; originally announced June 2023.

Modeling the Mg I from the NUV to MIR. II. Testing stellar models

Authors: J. I. Peralta, M. C. Vieytes, A. M. P. Mendez, D. M. Mitnik

Abstract: Aims. We tested the new atomic model using atmospheric models of stars of different spectral types: the Sun (dG2), HD22049 (dK2, Epsilon Eridani), GJ 832 (dM2), and GJ 581 (dM3). Methods. We used new Breit-Pauli distorted-wave (DW) multiconfiguration calculations, which proved to be relevant for many transitions in the mid-infrared (MIR) range. The new atomic model of Mg I includes the following… ▽ More Aims. We tested the new atomic model using atmospheric models of stars of different spectral types: the Sun (dG2), HD22049 (dK2, Epsilon Eridani), GJ 832 (dM2), and GJ 581 (dM3). Methods. We used new Breit-Pauli distorted-wave (DW) multiconfiguration calculations, which proved to be relevant for many transitions in the mid-infrared (MIR) range. The new atomic model of Mg I includes the following: i) recomputed ECS data through the DW method, including the superlevels. ii) For the nonlocal thermodynamic equilibrium (NLTE) population calculations, 5676 theoretical transitions were added (3001 term-to-term). iii) All of these improvements were studied in the Sun and the stars listed above. Results. The Mg distribution between ionization states for stars with different effective temperatures was compared. For the Sun and Epsilon Eridani, Mg II predominates with more than 95 %, while for GJ 832 and GJ 581, Mg I represents more than 72 % of the population. Moreover, in the latter stars, the amount of Mg forming molecules in their atmosphere is at least two orders of magnitude higher. Regarding the NLTE population, a noticeable lower variability in the departure coefficients was found, indicating a better population coupling for the new model. Comparing the synthetic spectrum calculated with the older and new Mg I atomic model, these results show minimal differences in the visible range but they are stronger in the IR for all of the stars. This aspect should be considered when using lines from this region as indicators. Nevertheless, some changes in the spectral type were found, also emphasizing the need to test the atomic models in different atmospheric conditions. The most noticeable changes occurred in the FUV and NUV, obtaining a higher flux for the new atomic model regardless of the spectral type. △ Less

Submitted 15 June, 2023; originally announced June 2023.

Journal ref: A&A 676, A18 (2023)

Dam** of three-dimensional waves on coating films dragged by moving substrates

Authors: David Barreiro-Villaverde, Anne Gosset, Marcos Lema, Miguel Alfonso Mendez

Abstract: Paints and coatings often feature interfacial defects due to disturbances during the deposition process which, if they persist until solidification, worsen the product quality. In this article, we investigate the stability of a thin liquid film dragged by a vertical substrate moving against gravity, a flow configuration found in a variety of coating processes. The receptivity of the liquid film to… ▽ More Paints and coatings often feature interfacial defects due to disturbances during the deposition process which, if they persist until solidification, worsen the product quality. In this article, we investigate the stability of a thin liquid film dragged by a vertical substrate moving against gravity, a flow configuration found in a variety of coating processes. The receptivity of the liquid film to three-dimensional disturbances is discussed with Direct Numerical Simulations (DNS), an in-house non-linear Integral Boundary Layer (IBL) film model, and Linear Stability Analysis (LSA). The thin film model, successfully validated with the DNS computations, implements a pseudo-spectral approach for the capillary terms that allows for investigating non-periodic surface tension dominated flows. The combination of these numerical tools allows for describing the mechanisms of capillary and non-linear dam**, and identifying the instability threshold of the coating processes. The results show that transverse modulations can be beneficial for the dam** of two-dimensional waves within the range of operational conditions considered in this study, typical of air-knife and slot-die coating. △ Less

Submitted 29 June, 2023; v1 submitted 25 May, 2023; originally announced May 2023.

Enabling discovery of solar system objects in large alert data streams

Authors: R. Le Montagner, J. Peloton, B. Carry, J. Desmars, D. Hestroffer, R. A. Mendez, A. C. Perlbarg, W. Thuillot

Abstract: With the advent of large-scale astronomical surveys such as the Zwicky Transient Facility (ZTF), the number of alerts generated by transient, variable and moving astronomical objects is growing rapidly, reaching millions per night. Concerning solar system minor planets, their identification requires linking the alerts of many observations over a potentially large time, leading to a very large comb… ▽ More With the advent of large-scale astronomical surveys such as the Zwicky Transient Facility (ZTF), the number of alerts generated by transient, variable and moving astronomical objects is growing rapidly, reaching millions per night. Concerning solar system minor planets, their identification requires linking the alerts of many observations over a potentially large time, leading to a very large combinatorial number. This work aims to identify new candidates for solar system objects from massive alert data streams produced by large-scale surveys, such as the ZTF and the Vera C. Rubin Observatory's Legacy Survey of Space and Time. Our analysis used the Fink alert broker capabilities to reduce the 111,275,131 processed alerts from ZTF between November 2019 and December 2022 to only 389,530 new solar system alert candidates over the same period. We then implemented a linking algorithm, Fink-FAT, to create real-time trajectory candidates from alert data and extract orbital parameters. The analysis was validated on ZTF alert packets linked to confirmed solar system objects from the Minor Planet Center database. Finally, the results were confronted against follow-up observations. Between November 2019 and December 2022, Fink-FAT extracted 327 new orbits from solar system object candidates at the time of the observations, over which 65 were still unreported in the MPC database as of March 2023. After two late follow-up observation campaigns of six orbit candidates, four were associated with known solar system minor planets, and two remain unknown. Fink-FAT is deployed in the Fink broker and successfully analyzes in real time the alert data from the ZTF survey by regularly extracting new candidates for solar system objects. Our scalability tests also show that Fink-FAT can handle the even larger volume of alert data that the Rubin Observatory will send. △ Less

Submitted 11 January, 2024; v1 submitted 1 May, 2023; originally announced May 2023.

Comments: Published in A&A

ACROCPoLis: A Descriptive Framework for Making Sense of Fairness

Authors: Andrea Aler Tubella, Dimitri Coelho Mollo, Adam Dahlgren Lindström, Hannah Devinney, Virginia Dignum, Petter Ericson, Anna Jonsson, Timotheus Kampik, Tom Lenaerts, Julian Alfredo Mendez, Juan Carlos Nieves

Abstract: Fairness is central to the ethical and responsible development and use of AI systems, with a large number of frameworks and formal notions of algorithmic fairness being available. However, many of the fairness solutions proposed revolve around technical considerations and not the needs of and consequences for the most impacted communities. We therefore want to take the focus away from definitions… ▽ More Fairness is central to the ethical and responsible development and use of AI systems, with a large number of frameworks and formal notions of algorithmic fairness being available. However, many of the fairness solutions proposed revolve around technical considerations and not the needs of and consequences for the most impacted communities. We therefore want to take the focus away from definitions and allow for the inclusion of societal and relational aspects to represent how the effects of AI systems impact and are experienced by individuals and social groups. In this paper, we do this by means of proposing the ACROCPoLis framework to represent allocation processes with a modeling emphasis on fairness aspects. The framework provides a shared vocabulary in which the factors relevant to fairness assessments for different situations and procedures are made explicit, as well as their interrelationships. This enables us to compare analogous situations, to highlight the differences in dissimilar situations, and to capture differing interpretations of the same situation by different stakeholders. △ Less

Submitted 19 April, 2023; originally announced April 2023.

Comments: To appear in the proceedings of ACM FAccT 2023

Multi-objective analysis of the Sand Hypoplasticity model calibration

Authors: Francisco J. Mendez, Miguel A. Mendez, Nicola Sciarra, Antonio Pasculli

Abstract: The Sand Hypoplastic (SH) constitutive law by von Wolffersdorff (1996) is a interesting hypoplastic model for soil mechanics. This model includes eight parameters, usually calibrated using the oedometric (OE) and the drained isotropically consolidated triaxial tests (CD). However, previous studies show that the SH model calibration in the CD test has conflicting requirements in predicting the evol… ▽ More The Sand Hypoplastic (SH) constitutive law by von Wolffersdorff (1996) is a interesting hypoplastic model for soil mechanics. This model includes eight parameters, usually calibrated using the oedometric (OE) and the drained isotropically consolidated triaxial tests (CD). However, previous studies show that the SH model calibration in the CD test has conflicting requirements in predicting the evolution of stresses and strains. In this work, we study the SH model calibration over a wide range of testing conditions using 12 OE and 25 CD tests by Wichtmann and Triantafyllidis (2016) on the Karlsruhe sands. The parameter space is extensively explored via Genetic Algorithm Optimization (GA) using the recently developed open-source software GA-cal (available at \url{https://github.com/FraJoMen/GA-cal}). This exploration allowed us to study the SH model's predictive limits and to identify, using a multi-objective analysis, the main parameters governing the compromise between the accurate prediction of stresses versus strain in the CD tests. △ Less

Submitted 13 March, 2023; originally announced March 2023.

A-BASE-DE-PROS: una implementación práctica de los Objetivos de Desarrollo Sostenible en la Universidad Politécnica de Madrid

Authors: Patricia Almendros, Silvia Otegui, Alejandro Nares, Laura del Fresno, Javier Ablanque, Irene Blanco, Juan Ramón Ferrer, Sonia Benito, Carmen Lopez, Sonia García, León Fernández, Sergio Zubelzu, Raúl Sánchez, Paloma Esteve, Rosa María Benito, Juan Carlos Losada, Antonio Saa, Gabriel Gascó, Ana M. Méndez, Mónica Montoya, Marina de Francisco, Jesús Ruiz, Samuel Seoanez, Sara Castilla, Dámaris Fuente , et al. (24 additional authors not shown)

Abstract: The influence of the Sustainable Development Goals (SDGs) has been widely spread over the last years, establishing new public and privat policies. Education has also been experiencing this change by aligning with the previous goals. In this chapter, we briefly summarize the main activities conducted under the Grant APS22.2003 'Service-based learning of the SDGs related to a responsible production… ▽ More The influence of the Sustainable Development Goals (SDGs) has been widely spread over the last years, establishing new public and privat policies. Education has also been experiencing this change by aligning with the previous goals. In this chapter, we briefly summarize the main activities conducted under the Grant APS22.2003 'Service-based learning of the SDGs related to a responsible production and consumption (A-BASE-DE-PROS)', which uses the SDG 12 as a guide line to raise the awareness of the importance of the 2030 Agenda among undergraduate and secondary-school students. In general, the service-based learning has increased the knowledge of the SDGs among the students. Furthermore, most of the (university and secondary) students found the service-learning △ Less

Submitted 27 February, 2023; originally announced February 2023.

Comments: 8 pages, in Spanish language, 8 figures

On decay properties for solutions of the Zakharov-Kuznetsov equation

Authors: Argenis J. Mendez, Oscar Riaño

Abstract: This work mainly focuses on the spatial decay properties of solutions to the Zakharov-Kuznetsov equation. In earlier studies for the two- and three-dimensional cases, it was established that if the initial condition $u_0$ verifies $\langle σ\cdot x\rangle^{r}u_{0}\in L^{2}(\left\{σ\cdot x\geq κ\right\}),$ for some $r\in\mathbb{N}$, $κ\in\mathbb{R}$, being $σ$ be a suitable non-null vector in the E… ▽ More This work mainly focuses on the spatial decay properties of solutions to the Zakharov-Kuznetsov equation. In earlier studies for the two- and three-dimensional cases, it was established that if the initial condition $u_0$ verifies $\langle σ\cdot x\rangle^{r}u_{0}\in L^{2}(\left\{σ\cdot x\geq κ\right\}),$ for some $r\in\mathbb{N}$, $κ\in\mathbb{R}$, being $σ$ be a suitable non-null vector in the Euclidean space, then the corresponding solution $u(t)$ generated from this initial condition verifies $\langle σ\cdot x\rangle ^{r}u(t)\in L^2\left(\left\{σ\cdot x>κ-νt\right\}\right)$, for any $ν>0$. In this regard, we first extend such results to arbitrary dimensions, decay power $r>0$ not necessarily an integer, and we give a detailed description of the gain of regularity propagated by solutions in terms of the magnitude of the weight $r$. The deduction of our results depends on a new class of pseudo-differential operators, which is useful to quantify decay and smoothness properties on a fractional scale. Secondly, we show that if the initial data $u_{0}$ has a decay of exponential type on a particular half space, that is, $e^{b\, σ\cdot x}u_{0}\in L^{2}(\left\{σ\cdot x\geq κ\right\}),$ then the corresponding solution satisfies $e^{b\, σ\cdot x} u(t)\in H^{p}\left(\left\{σ\cdot x>κ-νt\right\}\right),$ for all $p\in\mathbb{N}$, and time $t\geq δ,$ where $δ>0$. To our knowledge, this is the first study of such property. As a further consequence, we also obtain well-posedness results in anisotropic weighted Sobolev spaces in arbitrary dimensions. Finally, as a by-product of the techniques considered here, we show that our results are also valid for solutions of the Korteweg-de Vries equation. △ Less

Submitted 22 February, 2023; originally announced February 2023.

Comments: 51 pages

MSC Class: 35Q53; 35B05

A Domain-Agnostic Approach for Characterization of Lifelong Learning Systems

Authors: Megan M. Baker, Alexander New, Mario Aguilar-Simon, Ziad Al-Halah, Sébastien M. R. Arnold, Ese Ben-Iwhiwhu, Andrew P. Brna, Ethan Brooks, Ryan C. Brown, Zachary Daniels, Anurag Daram, Fabien Delattre, Ryan Dellana, Eric Eaton, Haotian Fu, Kristen Grauman, Jesse Hostetler, Shariq Iqbal, Cassandra Kent, Nicholas Ketz, Soheil Kolouri, George Konidaris, Dhireesha Kudithipudi, Erik Learned-Miller, Seungwon Lee , et al. (22 additional authors not shown)

Abstract: Despite the advancement of machine learning techniques in recent years, state-of-the-art systems lack robustness to "real world" events, where the input distributions and tasks encountered by the deployed systems will not be limited to the original training context, and systems will instead need to adapt to novel distributions and tasks while deployed. This critical gap may be addressed through th… ▽ More Despite the advancement of machine learning techniques in recent years, state-of-the-art systems lack robustness to "real world" events, where the input distributions and tasks encountered by the deployed systems will not be limited to the original training context, and systems will instead need to adapt to novel distributions and tasks while deployed. This critical gap may be addressed through the development of "Lifelong Learning" systems that are capable of 1) Continuous Learning, 2) Transfer and Adaptation, and 3) Scalability. Unfortunately, efforts to improve these capabilities are typically treated as distinct areas of research that are assessed independently, without regard to the impact of each separate capability on other aspects of the system. We instead propose a holistic approach, using a suite of metrics and an evaluation framework to assess Lifelong Learning in a principled way that is agnostic to specific domains or system techniques. Through five case studies, we show that this suite of metrics can inform the development of varied and complex Lifelong Learning systems. We highlight how the proposed suite of metrics quantifies performance trade-offs present during Lifelong Learning system development - both the widely discussed Stability-Plasticity dilemma and the newly proposed relationship between Sample Efficient and Robust Learning. Further, we make recommendations for the formulation and use of metrics to guide the continuing development of Lifelong Learning systems and assess their progress in the future. △ Less

Submitted 18 January, 2023; originally announced January 2023.

Comments: To appear in Neural Networks

Optimal observational scheduling framework for binary and multiple stellar systems

Authors: Miguel Videla, Rene A. Mendez, Jorge F. Silva, Marcos E. Orchard

Abstract: The optimal instant of observation of astrophysical phenomena for objects that vary on human time-sales is an important problem, as it bears on the cost-effective use of usually scarce observational facilities. In this paper we address this problem for the case of tight visual binary systems through a Bayesian framework based on the maximum entropy sampling principle. Our proposed information-driv… ▽ More The optimal instant of observation of astrophysical phenomena for objects that vary on human time-sales is an important problem, as it bears on the cost-effective use of usually scarce observational facilities. In this paper we address this problem for the case of tight visual binary systems through a Bayesian framework based on the maximum entropy sampling principle. Our proposed information-driven methodology exploits the periodic structure of binary systems to provide a computationally efficient estimation of the probability distribution of the optimal observation time. We show the optimality of the proposed sampling methodology in the Bayes sense and its effectiveness through direct numerical experiments. We successfully apply our scheme to the study of two visual-spectroscopic binaries, and one purely astrometric triple hierarchical system. We note that our methodology can be applied to any time-evolving phenomena, a particularly interesting application in the era of dedicated surveys, where a definition of the cadence of observations can have a crucial impact on achieving the science goals. △ Less

Submitted 10 January, 2023; originally announced January 2023.

Comments: Accepted for publication to PASP. 23 pages, 2 Tables, 9 Figures, 2 Appendices

Experimental analysis of heat and mass transfer in non-isothermal sloshing using a model-based inverse method

Authors: Pedro Marques, Alessia Simonini, Laura Peveroni, Miguel Alfonso Mendez

Abstract: Nonisothermal liquid sloshing in partially filled reservoirs can significantly enhance heat and mass transfer between liquid and ullage gasses. This can result in large temperature and pressure fluctuations, producing thrust oscillations in spacecraft and challenging thermal management control systems. This work presents an experimental characterization of the thermodynamic evolution of a cylindri… ▽ More Nonisothermal liquid sloshing in partially filled reservoirs can significantly enhance heat and mass transfer between liquid and ullage gasses. This can result in large temperature and pressure fluctuations, producing thrust oscillations in spacecraft and challenging thermal management control systems. This work presents an experimental characterization of the thermodynamic evolution of a cylindrical reservoir undergoing sloshing-induced thermal de-stratification. We use a 0D model-based inverse method to retrieve the heat and mass transfer coefficients in planar and swirl sloshing conditions from the temperature and pressure measurements in the liquid and the ullage gas. The experiments were carried out in the SHAKESPEARE shaking table of the von Karman Institute in a cuboid quartz cell with a cylindrical cut-out of 80 mm diameter in the centre, filled up to 60mm with the cryogenic replacement fluid HFE-7200. A thermal stratification with 25 K difference between the ullage gas and liquid was set as the initial conditions. A pressure drop of 90% in the ullage gas was documented in swirling conditions. Despite its simplicity, the model could predict the system's thermodynamic evolution once the proper transfer coefficients were derived. △ Less

Submitted 23 December, 2022; originally announced December 2022.

Comments: 18 pages, 14 figures, 4 tables

A Robust Data-Driven Model for Flap** Aerodynamics under different hovering kinematics

Authors: Andre Calado, Romain Poletti, Lilla K. Koloszar, Miguel A. Mendez

Abstract: Flap** Wing Micro Air Vehicles (FWMAV) are highly manoeuvrable, bio-inspired drones that can assist in surveys and rescue missions. Flap** wings generate various unsteady lift enhancement mechanisms challenging the derivation of reduced models to predict instantaneous aerodynamic performance. In this work, we propose a robust CFD data-driven, quasi-steady (QS) Reduced Order Model (ROM) to pred… ▽ More Flap** Wing Micro Air Vehicles (FWMAV) are highly manoeuvrable, bio-inspired drones that can assist in surveys and rescue missions. Flap** wings generate various unsteady lift enhancement mechanisms challenging the derivation of reduced models to predict instantaneous aerodynamic performance. In this work, we propose a robust CFD data-driven, quasi-steady (QS) Reduced Order Model (ROM) to predict the lift and drag coefficients within a flap** cycle. The model is derived for a rigid ellipsoid wing with different parameterized kinematics in hovering conditions. The proposed ROM is built via a two-stage regression. The first stage, defined as `in-cycle' (IC), computes the parameters of a regression linking the aerodynamic coefficients to the instantaneous wing state. The second stage, `out-of-cycle' (OOC), links the IC weights to the flap** features that define the flap** motion. The training and test dataset were generated via high-fidelity simulations using the overset method, spanning a wide range of Reynolds numbers and flap** kinematics. The two-stage regressor combines Ridge regression and Gaussian Process (GP) regression to provide estimates of the model uncertainties. The proposed ROM shows accurate aerodynamic predictions for widely varying kinematics. The model performs best for smooth kinematics that generate a stable Leading Edge Vortex (LEV). Remarkably accurate predictions are also observed in dynamic scenarios where the LEV is partially shed, the non-circulatory forces are considerable, and the wing encounters its own wake. △ Less

Submitted 19 December, 2022; originally announced December 2022.

Comments: submitted to Physics of Fluids

The GA-cal software for the automatic calibration of soil constitutive laws: a tutorial and a user manual

Authors: Francisco J. Mendez, Miguel A. Mendez, Antonio Pasculli

Abstract: The calibration of an advanced constitutive law for soil is a challenging task. This work describes GA-cal, a Fortran software for automatically calibrating constitutive laws using Genetic Algorithms (GA) optimization. The proposed approach sets the calibration problem as a regression, and the GA optimization is used to adjust the model parameters so that a numerical model matches experimental dat… ▽ More The calibration of an advanced constitutive law for soil is a challenging task. This work describes GA-cal, a Fortran software for automatically calibrating constitutive laws using Genetic Algorithms (GA) optimization. The proposed approach sets the calibration problem as a regression, and the GA optimization is used to adjust the model parameters so that a numerical model matches experimental data. This document provides a user guide and a simple tutorial. We showcase GA-cal on the calibration of the Sand Hypoplastic law proposed by von Wolffersdorff, with the oedometer and triaxial drained test data. The implemented subroutines can be easily extended to solve other regression or optimization problems, including different tests and constitutive models. The source code and the presented tutorial are freely available at \url{https://github.com/FraJoMen/GA-cal}. △ Less

Submitted 24 November, 2022; originally announced November 2022.

ESPNN: A novel electronic stop** power neural-network code built on the IAEA stop** power database. I. Atomic targets

Authors: F. Bivort Haiek, A. M. P. Mendez, C. C. Montanari, D. M. Mitnik

Abstract: The International Atomic Energy Agency (IAEA) stop** power database is a highly valued public resource compiling most of the experimental measurements published over nearly a century. The database-accessible to the global scientific community-is continuously updated and has been extensively employed in theoretical and experimental research for more than 30 years. This work aims to employ machine… ▽ More The International Atomic Energy Agency (IAEA) stop** power database is a highly valued public resource compiling most of the experimental measurements published over nearly a century. The database-accessible to the global scientific community-is continuously updated and has been extensively employed in theoretical and experimental research for more than 30 years. This work aims to employ machine learning algorithms on the 2021 IAEA database to predict accurate electronic stop** power cross sections for any ion and target combination in a wide range of incident energies. Unsupervised machine learning methods are applied to clean the database in an automated manner. These techniques purge the data by removing suspicious outliers and old isolated values. A large portion of the remaining data is used to train a deep neural network, while the rest is set aside, constituting the test set. The present work considers collisional systems only with atomic targets. The first version of the ESPNN (electronic stop** power neural-network code), openly available to users, is shown to yield predicted values in excellent agreement with the experimental results of the test set. △ Less

Submitted 14 December, 2022; v1 submitted 19 October, 2022; originally announced October 2022.

Report number: JAP22-AR-05596

Yttrium incorporation in Cr2AlC: On the metastable phase formation and decomposition of (Cr,Y)2AlC MAX phase thin films

Authors: Clio Azina, Tim Bartsch, Damian M. Holzapfel, Martin Dahlqvist, Johanna Rosen, Lukas Löfler, Alba San Jose Mendez, Marcus Hans, Daniel Primetzhofer, Jochen M. Schneider

Abstract: Herein we report on the synthesis of a metastable (Cr,Y)2AlC MAX phase solid solution by co-sputtering from a composite Cr-Al-C and elemental Y target, at room temperature, followed by annealing. While direct high-temperature synthesis resulted in multiphase films, as evidenced by X-ray diffraction analyses, room temperature depositions, followed by annealing to 760 °C led to the formation of phas… ▽ More Herein we report on the synthesis of a metastable (Cr,Y)2AlC MAX phase solid solution by co-sputtering from a composite Cr-Al-C and elemental Y target, at room temperature, followed by annealing. While direct high-temperature synthesis resulted in multiphase films, as evidenced by X-ray diffraction analyses, room temperature depositions, followed by annealing to 760 °C led to the formation of phase pure (Cr,Y)2AlC by diffusion. Higher annealing temperatures caused decomposition of the metastable phase into Cr2AlC, Y5Al3 , and Cr-carbides. In contrast to pure Cr2AlC, the Y-containing phase crystallizes directly in the MAX phase structure instead of first forming a disordered solid solution. Furthermore, the crystallization temperature was shown to be Y-content dependent and was increased by ~200 °C for 5 at.% Y compared to Cr2AlC. Calculations predicting the metastable phase formation of (Cr,Y)2AlC and its decomposition are in excellent agreement with the experimental findings. △ Less

Submitted 15 September, 2022; originally announced September 2022.

Comments: submitted to Journal of the American Ceramic Society, 9 Figures, 30 pages total

Generalized and Multiscale Modal Analysis

Authors: Miguel A. Mendez

Abstract: This chapter describes modal decompositions in the framework of matrix factorizations. We highlight the differences between classic space-time decompositions and 2D discrete transforms and discuss the general architecture underpinning \emph{any} decomposition. This setting is then used to derive simple algorithms that complete \emph{any} linear decomposition from its spatial or temporal structures… ▽ More This chapter describes modal decompositions in the framework of matrix factorizations. We highlight the differences between classic space-time decompositions and 2D discrete transforms and discuss the general architecture underpinning \emph{any} decomposition. This setting is then used to derive simple algorithms that complete \emph{any} linear decomposition from its spatial or temporal structures (bases). Discrete Fourier Transform, Proper Orthogonal Decomposition (POD), Dynamic Mode Decomposition (DMD), and Eigenfunction Expansions (EF) are formulated in this framework and compared on a simple exercise. Finally, this generalization is used to analyze the impact of spectral constraints on the classical POD, and to derive the Multiscale Proper Orthogonal Decomposition (mPOD). This decomposition combines Multiresolution Analysis (MRA) and POD. This chapter contains four exercises and two tutorial test cases. The \textsc{Python} scripts associated to these are provided on the book's website. △ Less

Submitted 26 August, 2022; originally announced August 2022.

Comments: Chapter 8 in the book `Data Driven Fluid Mechanics', originating from the lecture series `Machine Learning in Fluid Mechanics' organized by the von Karman Institute in 2020

Continuous and Discrete LTI Systems

Authors: Miguel A. Mendez

Abstract: This chapter reviews the fundamentals of continuous and discrete Linear Time-Invariant (LTI) systems with Single Input-Single Output (SISO). We start from the general notions of signals and systems, the signal representation problem and the related orthogonal bases in discrete and continuous forms. We then move to the key properties of LTI systems and discuss their eigenfunctions, the input-output… ▽ More This chapter reviews the fundamentals of continuous and discrete Linear Time-Invariant (LTI) systems with Single Input-Single Output (SISO). We start from the general notions of signals and systems, the signal representation problem and the related orthogonal bases in discrete and continuous forms. We then move to the key properties of LTI systems and discuss their eigenfunctions, the input-output relations in the time and frequency domains, the conformal map** linking the continuous and the discrete formulations, and the modeling via differential and difference equations. Finally, we close with two important applications: (linear) models for time series analysis and forecasting and (linear) digital filters for multi-resolution analysis. This chapter contains seven exercises, the solution of which is provided in the book's webpage. △ Less

Submitted 25 August, 2022; originally announced August 2022.

Comments: Chapter 4 in the book `Data Driven Fluid Mechanics', originating from the lecture series `Machine Learning in Fluid Mechanics' organized by the von Karman Institute in 2020

Linear and Nonlinear Dimensionality Reduction from Fluid Mechanics to Machine Learning

Authors: Miguel A. Mendez

Abstract: Dimensionality reduction is the essence of many data processing problems, including filtering, data compression, reduced-order modeling and pattern analysis. While traditionally tackled using linear tools in the fluid dynamics community, nonlinear tools from machine learning are becoming increasingly popular. This article, halfway between a review and a tutorial, introduces a general framework for… ▽ More Dimensionality reduction is the essence of many data processing problems, including filtering, data compression, reduced-order modeling and pattern analysis. While traditionally tackled using linear tools in the fluid dynamics community, nonlinear tools from machine learning are becoming increasingly popular. This article, halfway between a review and a tutorial, introduces a general framework for linear and nonlinear dimensionality reduction techniques. Differences and links between autoencoders and manifold learning methods are highlighted, and popular nonlinear techniques such as kernel Principal Component Analysis (kPCA), isometric feature learning (ISOMAPs) and Locally Linear Embedding (LLE) are placed in this framework. These algorithms are benchmarked in three classic problems: 1) filtering, 2) identification of oscillatory patterns, and 3) data compression. Their performances are compared against the traditional Proper Orthogonal Decomposition (POD) to provide a perspective on their diffusion in fluid dynamics. △ Less

Submitted 15 December, 2022; v1 submitted 16 August, 2022; originally announced August 2022.

Comments: submitted to Measurement Science and Technology

A 1D Model for the Unsteady Gas Dynamics of Ejectors

Authors: Jan Van den Berghe, Bruno R. B. Dias, Yann Bartosiewicz, Miguel A. Mendez

Abstract: We propose a 1D unsteady model for supersonic single-phase ejectors. The model treats an ejector as a pipe network with two inputs and one output and combines a 1D gas dynamics formulation in each `pipe' with a junction model for entrainment and mixing. The model is calibrated and validated on experimental data in steady-state conditions and used to analyze the choking mechanism for the mixed flow… ▽ More We propose a 1D unsteady model for supersonic single-phase ejectors. The model treats an ejector as a pipe network with two inputs and one output and combines a 1D gas dynamics formulation in each `pipe' with a junction model for entrainment and mixing. The model is calibrated and validated on experimental data in steady-state conditions and used to analyze the choking mechanism for the mixed flow. The model was then benchmarked against 2D URANS simulations to predict the ejector response to a sudden change in operating conditions, producing traveling waves. The results show that the model can correctly predict the ejector performance and the stream-wise evolution of relevant integral quantities (e.g. mass flow rates and momentum) in both steady and transient conditions. △ Less

Submitted 16 August, 2022; originally announced August 2022.

Comments: 14 pages, 9 figures, submitted to Energy

Data-driven modeling of hypersonic reentry flow with heat and mass transfer

Authors: Leonidas Gkimisis, Bruno Ricardo Barros Dias, James B. Scoggins, Thierry Magin, Miguel Alfonso Mendez, Alessandro Turchi

Abstract: The entry phase constitutes a design driver for aerospace systems that include such a critical step. This phase is characterized by hypersonic flows encompassing multiscale phenomena that require advanced modeling capabilities. However, since high fidelity simulations are often computationally prohibitive, simplified models are needed in multidisciplinary analyses requiring fast predictions. This… ▽ More The entry phase constitutes a design driver for aerospace systems that include such a critical step. This phase is characterized by hypersonic flows encompassing multiscale phenomena that require advanced modeling capabilities. However, since high fidelity simulations are often computationally prohibitive, simplified models are needed in multidisciplinary analyses requiring fast predictions. This work proposes data-driven surrogate models to predict the flow, and mixture properties along the stagnation streamline of hypersonic flows past spherical objects. Surrogate models are designed to predict velocity, pressure, temperature, density and air composition as a function of the object's radius, velocity, reentry altitude and surface temperature. These models are trained with data produced by numerical simulation of the quasi-one-dimensional Navier-Stokes formulation and a selected Earth atmospheric model. Physics-constrained parametric functions are constructed for each flow variable of interest, and artificial neural networks are used to map the model parameters to the model's inputs. Surrogate models were also developed to predict surface quantities of interest for the case of nonreacting or ablative carbon-based surfaces, providing alternatives to semiempirical correlations. A validation study is presented for all the developed models, and their predictive capabilities are showcased along selected reentry trajectories of space debris from low-Earth orbits. △ Less

Submitted 21 August, 2023; v1 submitted 12 August, 2022; originally announced August 2022.

Journal ref: American Institute of Aeronautics and Astronautics Journal, Volume 61, Number 8, August 2023

Effect of inertia on the dynamic contact angle in oscillating menisci

Authors: Domenico Fiorini, Miguel Alfonso Mendez, Alessia Simonini, Johan Steelant, David Seveno

Abstract: The contact angle between a gas-liquid interface and a solid surface is a function of the dynamic conditions of the contact line. Classic steady correlations link the contact angle to the contact line velocity. However, it is not clear whether they hold in presence of inertia and in the case of perfect wetting fluids. We analyze the shape of a liquid interface and the corresponding contact angle i… ▽ More The contact angle between a gas-liquid interface and a solid surface is a function of the dynamic conditions of the contact line. Classic steady correlations link the contact angle to the contact line velocity. However, it is not clear whether they hold in presence of inertia and in the case of perfect wetting fluids. We analyze the shape of a liquid interface and the corresponding contact angle in accelerating conditions for two different fluids, i.e. HFE7200 (perfect wetting) and demineralized water. The set-up consists of a U-shaped quasi-capillary tube in which the liquid column oscillates in response to a pressure step on one of the two sides. We obtained the evolution of the interface shape from high-speed back-light visualization, and we fit interface models to the experimental data to estimate the contributions of all the governing forces and the contact angle. Traditional interface models fail to predict the interface shape and its contact angle at large interface and contact line accelerations. We propose a new model to account for the acceleration, and we discuss its impact on the measurement of the transient contact angle. △ Less

Submitted 10 August, 2022; originally announced August 2022.

Lifelong Machine Learning of Functionally Compositional Structures

Authors: Jorge A. Mendez

Abstract: A hallmark of human intelligence is the ability to construct self-contained chunks of knowledge and reuse them in novel combinations for solving different problems. Learning such compositional structures has been a challenge for artificial systems, due to the underlying combinatorial search. To date, research into compositional learning has largely proceeded separately from work on lifelong or con… ▽ More A hallmark of human intelligence is the ability to construct self-contained chunks of knowledge and reuse them in novel combinations for solving different problems. Learning such compositional structures has been a challenge for artificial systems, due to the underlying combinatorial search. To date, research into compositional learning has largely proceeded separately from work on lifelong or continual learning. This dissertation integrated these two lines of work to present a general-purpose framework for lifelong learning of functionally compositional structures. The framework separates the learning into two stages: learning how to combine existing components to assimilate a novel problem, and learning how to adapt the existing components to accommodate the new problem. This separation explicitly handles the trade-off between stability and flexibility. This dissertation instantiated the framework into various supervised and reinforcement learning (RL) algorithms. Supervised learning evaluations found that 1) compositional models improve lifelong learning of diverse tasks, 2) the multi-stage process permits lifelong learning of compositional knowledge, and 3) the components learned by the framework represent self-contained and reusable functions. Similar RL evaluations demonstrated that 1) algorithms under the framework accelerate the discovery of high-performing policies, and 2) these algorithms retain or improve performance on previously learned tasks. The dissertation extended one lifelong compositional RL algorithm to the nonstationary setting, where the task distribution varies over time, and found that modularity permits individually tracking changes to different elements in the environment. The final contribution of this dissertation was a new benchmark for compositional RL, which exposed that existing methods struggle to discover the compositional properties of the environment. △ Less

Submitted 25 July, 2022; originally announced July 2022.

Comments: PhD dissertation defended at the University of Pennsylvania in 2022 (minor corrections added). 262 pages, 47 figures, 21 tables

How to Reuse and Compose Knowledge for a Lifetime of Tasks: A Survey on Continual Learning and Functional Composition

Authors: Jorge A. Mendez, Eric Eaton

Abstract: A major goal of artificial intelligence (AI) is to create an agent capable of acquiring a general understanding of the world. Such an agent would require the ability to continually accumulate and build upon its knowledge as it encounters new experiences. Lifelong or continual learning addresses this setting, whereby an agent faces a continual stream of problems and must strive to capture the knowl… ▽ More A major goal of artificial intelligence (AI) is to create an agent capable of acquiring a general understanding of the world. Such an agent would require the ability to continually accumulate and build upon its knowledge as it encounters new experiences. Lifelong or continual learning addresses this setting, whereby an agent faces a continual stream of problems and must strive to capture the knowledge necessary for solving each new task it encounters. If the agent is capable of accumulating knowledge in some form of compositional representation, it could then selectively reuse and combine relevant pieces of knowledge to construct novel solutions. Despite the intuitive appeal of this simple idea, the literatures on lifelong learning and compositional learning have proceeded largely separately. In an effort to promote developments that bridge between the two fields, this article surveys their respective research landscapes and discusses existing and future connections between them. △ Less

Submitted 13 June, 2023; v1 submitted 15 July, 2022; originally announced July 2022.

Comments: Published in Transactions on Machine Learning Research (TMLR), June 2023

Control of a Wind-Turbine via Machine Learning techniques

Authors: L. Schena, E. Gillyns, W. Munters, S. Buckingham, M. A. Mendez

Abstract: This article presents two model-free controllers for wind-turbine torque and pitch control. These controllers are based on reinforcement learning (RL) and Bayesian optimization (BO) and do not rely on any mathematical model of the wind-turbine dynamics, in contrast to classical approaches designed on linearized models. The model-free controllers were benchmarked against a proportional-integral-der… ▽ More This article presents two model-free controllers for wind-turbine torque and pitch control. These controllers are based on reinforcement learning (RL) and Bayesian optimization (BO) and do not rely on any mathematical model of the wind-turbine dynamics, in contrast to classical approaches designed on linearized models. The model-free controllers were benchmarked against a proportional-integral-derivative (PID) regulator in a numerical environment using Blade Element Momentum theory for computing the aerodynamic torque and the blade loads. The results showed that the model-free approaches could increase power harvesting while reducing wind turbine loads. △ Less

Submitted 13 July, 2022; originally announced July 2022.

A RANS approach to the Meshless Computation of Pressure Fields From Image Velocimetry

Authors: Pietro Sperotto, Sandra Pieraccini, Miguel A. Mendez

Abstract: We propose a 3D meshless method to compute mean pressure fields in turbulent flows from image velocimetry. The method is an extension of the constrained Radial Basis Function (RBF) formulation by \citet{Sperotto2022} to a Reynolds Averaged Navier Stokes (RANS) framework. This is designed to handle both scattered data as in Particle Tracking Velocimetry (PTV) and data in uniform grids as in correla… ▽ More We propose a 3D meshless method to compute mean pressure fields in turbulent flows from image velocimetry. The method is an extension of the constrained Radial Basis Function (RBF) formulation by \citet{Sperotto2022} to a Reynolds Averaged Navier Stokes (RANS) framework. This is designed to handle both scattered data as in Particle Tracking Velocimetry (PTV) and data in uniform grids as in correlation-based Particle Image Velocimetry (PIV). The RANS extension includes the Reynolds stresses into the constrained least square problem. We test the approach on a numerical database featuring a Backward Facing Step (BFS) with a Reynolds number of 6400 (defined with respect to the inlet velocity and step height), obtained via Direct Numerical Simulation (DNS). △ Less

Submitted 11 July, 2022; originally announced July 2022.

Journal ref: presented at LXLASER2022

On Kato's smoothing effect for a fractional version of the Zakharov-Kuznetsov equation

Authors: Argenis. J. Mendez

Abstract: In this work we study some regularity properties associated to the initial value problem (IVP) \begin{equation}\label{main1} \left\{ \begin{array}{ll} \partial_{t}u-\partial_{x_{1}}(-Δ)^{α/2} u+u\partial_{x_{1}}u=0, \quad 0< α\leq 2,& \\ u(x,0)=u_{0}(x),\quad x=(x_{1},x_{2},\dots,x_{n})\in \mathbb{R}^{n},\, n\geq 2,\quad t\in\mathbb{R},& \\ \end{array} \right. \end{equation} where $(-Δ)^{α/2}$ den… ▽ More In this work we study some regularity properties associated to the initial value problem (IVP) \begin{equation}\label{main1} \left\{ \begin{array}{ll} \partial_{t}u-\partial_{x_{1}}(-Δ)^{α/2} u+u\partial_{x_{1}}u=0, \quad 0< α\leq 2,& \\ u(x,0)=u_{0}(x),\quad x=(x_{1},x_{2},\dots,x_{n})\in \mathbb{R}^{n},\, n\geq 2,\quad t\in\mathbb{R},& \\ \end{array} \right. \end{equation} where $(-Δ)^{α/2}$ denotes the $n-$dimensional fractional Laplacian. We show that solutions to the IVP (0.1) with initial data in a suitable Sobolev space exhibit a local smoothing effect in the spatial variable of $\fracα{2}$ derivatives, almost everywhere in time. One of the main difficulties that emerge when trying to obtain this regularizing effect underlies that the operator in consideration is non-local, and the property we are trying to describe is local, so new ideas are required. Nevertheless, to avoid these problems, we use a perturbation argument replacing $(-Δ)^{\fracα{2}}$ by $(I-Δ)^{\fracα{2}},$ that through the use of pseudo-differential calculus allows us to show that solutions become locally smoother by $\fracα{2}$ of a derivative in all spatial directions. As a by-product, we use this particular smoothing effect to show that the extra regularity of the initial data on some distinguished subsets of the Euclidean space is propagated by the flow solution with infinity speed. △ Less

Submitted 12 July, 2022; v1 submitted 8 July, 2022; originally announced July 2022.