-
Optimization of Antenna Performance for Global 21-cm Observations and Verification Using Scaled Copies
Authors:
O. A. Restrepo,
F. I. Lucero,
G. Chaparro,
R. Rodríguez,
F. Pizarro,
R. Bustos,
M. Díaz,
F. P. Mena
Abstract:
The sky-averaged cosmological 21 cm signal can improve our understanding of the evolution of the early Universe from the Dark Age to the end of the Epoch of Reionization. Although the EDGES experiment reported an absorption profile of this signal, there have been concerns about the plausibility of these results, motivating independent validation experiments. One of these initiatives is the Mapper…
▽ More
The sky-averaged cosmological 21 cm signal can improve our understanding of the evolution of the early Universe from the Dark Age to the end of the Epoch of Reionization. Although the EDGES experiment reported an absorption profile of this signal, there have been concerns about the plausibility of these results, motivating independent validation experiments. One of these initiatives is the Mapper of the IGM Spin Temperature (MIST), which is planned to be deployed at different remote locations around the world. One of its key features is that it seeks to comprehensively compensate for systematic uncertainties through detailed modeling and characterization of its different instrumental subsystems, particularly its antenna. Here we propose a novel optimizing scheme which can be used to design an antenna applied to MIST, improving bandwidth, return loss, and beam chromaticity. This new procedure combines the Particle Swarm Optimization (PSO) algorithm with a commercial electromagnetic simulation software (HFSS). We improved the performance of two antenna models: a rectangular blade antenna, similar to the one used in the EDGES experiment, and a trapezoidal bow-tie antenna. Although the performance of both antennas improved after applying our optimization method, we found that our bow-tie model outperforms the blade antenna by achieving lower reflection losses and beam chromaticity in the entire band of interest. To further validate the optimization process, we also built and characterized 1:20 scale models of both antenna types showing an excellent agreement with our simulations.
△ Less
Submitted 4 December, 2023;
originally announced December 2023.
-
Modeling and Testing Superconducting Artificial CPW Lines Suitable for Parametric Amplification
Authors:
F. P. Mena,
D. Valenzuela,
C. Espinoza,
F. Pizarro,
B. -K. Tan,
D. J. Thoen,
J. J. A. Baselmans,
R. Finger
Abstract:
Achieving amplification with high gain and quantum-limited noise is a difficult problem to solve. Parametric amplification using a superconducting transmission line with high kinetic inductance is a promising technology not only to solve this problem but also adding several benefits. When compared with other technologies, they have the potential of improving power saturation, achieving larger frac…
▽ More
Achieving amplification with high gain and quantum-limited noise is a difficult problem to solve. Parametric amplification using a superconducting transmission line with high kinetic inductance is a promising technology not only to solve this problem but also adding several benefits. When compared with other technologies, they have the potential of improving power saturation, achieving larger fractional bandwidths and operating at higher frequencies. In this type of amplifiers, selecting the proper transmission line is a key element in their design. Given current fabrication limitations, traditional lines such as coplanar waveguides (CPW), are not ideal for this purpose since it is difficult to make them with the proper characteristic impedance for good matching and slow-enough phase velocity for making them more compact. Capacitively-loaded lines, also known as artificial lines, are a good solution to this problem. However, few design rules or models have been presented to guide their accurate design. This fact is even more crucial considering that they are usually fabricated in the form of Floquet lines that have to be designed carefully to suppress undesired harmonics appearing in the parametric process. In this article we present, firstly, a new modelling strategy, based on the use of electromagnetic-simulation software, and, secondly, a first-principles model that facilitate and speed the design of CPW artificial lines and of Floquet lines made out of them. Then, we present comparisons with experimental results that demonstrate their accuracy. Finally, the theoretical model allows to predict the high-frequency behaviour of the artificial lines showing that they are good candidates for implementing parametric amplifiers above 100 GHz.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
Simulating the Detection of the Global 21 cm Signal with MIST for Different Models of the Soil and Beam Directivity
Authors:
Raul A. Monsalve,
Christian H. Bye,
Jonathan L. Sievers,
Vadym Bidula,
Ricardo Bustos,
H. Cynthia Chiang,
Xinze Guo,
Ian Hendricksen,
Francis McGee,
F. Patricio Mena,
Garima Prabhakar,
Oscar Restrepo,
Nithyanandan Thyagarajan
Abstract:
The Mapper of the IGM Spin Temperature (MIST) is a new ground-based, single-antenna, radio experiment attempting to detect the global 21 cm signal from the Dark Ages and Cosmic Dawn. A significant challenge in this measurement is the frequency-dependence, or chromaticity, of the antenna beam directivity. MIST observes with the antenna above the soil and without a metal ground plane, and the beam d…
▽ More
The Mapper of the IGM Spin Temperature (MIST) is a new ground-based, single-antenna, radio experiment attempting to detect the global 21 cm signal from the Dark Ages and Cosmic Dawn. A significant challenge in this measurement is the frequency-dependence, or chromaticity, of the antenna beam directivity. MIST observes with the antenna above the soil and without a metal ground plane, and the beam directivity is sensitive to the electrical characteristics of the soil. In this paper, we use simulated observations with MIST to study how the detection of the global 21 cm signal from Cosmic Dawn is affected by the soil and the MIST beam directivity. We simulate observations using electromagnetic models of the directivity computed for single- and two-layer models of the soil. We test the recovery of the Cosmic Dawn signal with and without beam chromaticity correction applied to the simulated data. We find that our single-layer soil models enable a straightforward recovery of the signal even without chromaticity correction. Two-layer models increase the beam chromaticity and make the recovery more challenging. However, for the model in which the bottom soil layer has a lower electrical conductivity than the top layer, the signal can be recovered even without chromaticity correction. For the other two-layer models, chromaticity correction is necessary for the recovery of the signal and the accuracy requirements for the soil parameters vary between models. These results will be used as a guideline to select observation sites that are favorable for the detection of the Cosmic Dawn signal.
△ Less
Submitted 23 May, 2024; v1 submitted 10 October, 2023;
originally announced October 2023.
-
Mapper of the IGM spin temperature: instrument overview
Authors:
R. A. Monsalve,
C. Altamirano,
V. Bidula,
R. Bustos,
C. H. Bye,
H. C. Chiang,
M. Diaz,
B. Fernandez,
X. Guo,
I. Hendricksen,
E. Hornecker,
F. Lucero,
H. Mani,
F. McGee,
F. P. Mena,
M. Pessoa,
G. Prabhakar,
O. Restrepo,
J. L. Sievers,
N. Thyagarajan
Abstract:
The observation of the global 21 cm signal produced by neutral hydrogen gas in the intergalactic medium (IGM) during the Dark Ages, Cosmic Dawn, and Epoch of Reionization requires measurements with extremely well-calibrated wideband radiometers. We describe the design and characterization of the Mapper of the IGM Spin Temperature (MIST), which is a new ground-based, single-antenna, global 21 cm ex…
▽ More
The observation of the global 21 cm signal produced by neutral hydrogen gas in the intergalactic medium (IGM) during the Dark Ages, Cosmic Dawn, and Epoch of Reionization requires measurements with extremely well-calibrated wideband radiometers. We describe the design and characterization of the Mapper of the IGM Spin Temperature (MIST), which is a new ground-based, single-antenna, global 21 cm experiment. The design of MIST was guided by the objectives of avoiding systematics from an antenna ground plane and cables around the antenna, as well as maximizing the instrument's on-sky efficiency and portability for operations at remote sites. We have built two MIST instruments, which observe in the range 25-105 MHz. For the 21 cm signal, this frequency range approximately corresponds to redshifts 55.5 > z > 12.5, encompassing the Dark Ages and Cosmic Dawn. The MIST antenna is a horizontal blade dipole of 2.42 m in length, 60 cm in width, and 52 cm in height above the ground. This antenna operates without a metal ground plane. The instruments run on 12 V batteries and have a maximum power consumption of 17 W. The batteries and electronics are contained in a single receiver box located under the antenna. We present the characterization of the instruments using electromagnetic simulations and lab measurements. We also show sample sky measurements from recent observations at remote sites in California, Nevada, and the Canadian High Arctic. These measurements indicate that the instruments perform as expected. Detailed analyses of the sky measurements are left for future work.
△ Less
Submitted 23 May, 2024; v1 submitted 6 September, 2023;
originally announced September 2023.
-
The effect of complex dispersion and characteristic impedance on the gain of superconducting traveling-wave kinetic inductance parametric amplifiers
Authors:
Javier Carrasco,
Daniel Valenzuela,
Claudio Falcón,
Ricardo Finger,
F. Patricio Mena
Abstract:
Superconducting traveling-wave parametric amplifiers are a promising amplification technology suitable for applications in submillimeter astronomy. Their implementation relies on the use of Floquet transmission lines in order to create strong stopbands to suppress undesired harmonics. In the design process, amplitude equations are used to predict their gain, operation frequency, and bandwidth. How…
▽ More
Superconducting traveling-wave parametric amplifiers are a promising amplification technology suitable for applications in submillimeter astronomy. Their implementation relies on the use of Floquet transmission lines in order to create strong stopbands to suppress undesired harmonics. In the design process, amplitude equations are used to predict their gain, operation frequency, and bandwidth. However, usual amplitude equations do not take into account the real and imaginary parts of the dispersion and characteristic impedance that results from the use of Floquet lines, hindering reliable design. In order to overcome this limitation, we have used the multiple-scales method to include those effects. We demonstrate that complex dispersion and characteristic impedance have a stark effect on the transmission line's gain, even suppressing it completely in certain cases. The equations presented here can, thus, guide to a better design and understanding of the properties of this kind of amplifiers.
△ Less
Submitted 2 October, 2022;
originally announced October 2022.
-
The LSPE-Strip beams
Authors:
S. Realini,
C. Franceschet,
F. Villa,
M. Sandri,
G. Addamo,
P. Alonso-Arias,
M. Bersanelli,
F. Cuttaia,
M. Jones,
M. Maris,
F. P. Mena,
A. Mennella,
R. Molina,
G. Morgante,
M. Tomasi,
M. Zannoni
Abstract:
In this paper we describe the design and characterization of the optical system of LSPE/Strip, a coherent polarimeter array that will observe the microwave sky from the Teide Observatory in Tenerife in two frequency bands centred at 43 and 95 GHz through a dual-reflector crossed-Dragone telescope of 1.5 m aperture. In general, optical systems composed by a telescopefeed array assembly have non-ide…
▽ More
In this paper we describe the design and characterization of the optical system of LSPE/Strip, a coherent polarimeter array that will observe the microwave sky from the Teide Observatory in Tenerife in two frequency bands centred at 43 and 95 GHz through a dual-reflector crossed-Dragone telescope of 1.5 m aperture. In general, optical systems composed by a telescopefeed array assembly have non-idealities that might limit their ability to perform high-precision measurements. It is thus necessary to understand, characterize and properly control these systematic effects. For this reason, we performed electromagnetic simulations to characterize angular resolution, sidelobes, main beam symmetry, polarization purity and feedhorns orientation. The results presented in this paper will be an essential input for further optical studies and for the LSPE/Strip data analysis. Ultimately, they will be used to assess the impact of optical systematic effects on the scientific results.
△ Less
Submitted 26 January, 2022; v1 submitted 3 September, 2021;
originally announced September 2021.
-
The large scale polarization explorer (LSPE) for CMB measurements: performance forecast
Authors:
The LSPE collaboration,
G. Addamo,
P. A. R. Ade,
C. Baccigalupi,
A. M. Baldini,
P. M. Battaglia,
E. S. Battistelli,
A. Baù,
P. de Bernardis,
M. Bersanelli,
M. Biasotti,
A. Boscaleri,
B. Caccianiga,
S. Caprioli,
F. Cavaliere,
F. Cei,
K. A. Cleary,
F. Columbro,
G. Coppi,
A. Coppolecchia,
F. Cuttaia,
G. D'Alessandro,
G. De Gasperis,
M. De Petris,
V. Fafone
, et al. (80 additional authors not shown)
Abstract:
[Abridged] The measurement of the polarization of the Cosmic Microwave Background radiation is one of the current frontiers in cosmology. In particular, the detection of the primordial B-modes, could reveal the presence of gravitational waves in the early Universe. The detection of such component is at the moment the most promising technique to probe the inflationary theory describing the very ear…
▽ More
[Abridged] The measurement of the polarization of the Cosmic Microwave Background radiation is one of the current frontiers in cosmology. In particular, the detection of the primordial B-modes, could reveal the presence of gravitational waves in the early Universe. The detection of such component is at the moment the most promising technique to probe the inflationary theory describing the very early evolution of the Universe. We present the updated performance forecast of the Large Scale Polarization Explorer (LSPE), a program dedicated to the measurement of the CMB polarization. LSPE is composed of two instruments: Strip, a radiometer-based telescope on the ground in Tenerife, and SWIPE (Short-Wavelength Instrument for the Polarization Explorer) a bolometer-based instrument designed to fly on a winter arctic stratospheric long-duration balloon. The program is among the few dedicated to observation of the Northern Hemisphere, while most of the international effort is focused into ground-based observation in the Southern Hemisphere. Measurements are currently scheduled in Winter 2021/22 for SWIPE, with a flight duration up to 15 days, and in Summer 2021 with two years observations for Strip. We describe the main features of the two instruments, identifying the most critical aspects of the design, in terms of impact into performance forecast. We estimate the expected sensitivity of each instrument and propagate their combined observing power to the sensitivity to cosmological parameters, including the effect of scanning strategy, component separation, residual foregrounds and partial sky coverage. We also set requirements on the control of the most critical systematic effects and describe techniques to mitigate their impact. LSPE can reach a sensitivity in tensor-to-scalar ratio of $σ_r<0.01$, and improve constrains on other cosmological parameters.
△ Less
Submitted 9 August, 2021; v1 submitted 25 August, 2020;
originally announced August 2020.
-
Progress report on the Large Scale Polarization Explorer
Authors:
L. Lamagna,
G. Addamo,
P. A. R. Ade,
C. Baccigalupi,
A. M. Baldini,
P. M. Battaglia,
E. Battistelli,
A. Baù,
M. Bersanelli,
M. Biasotti,
C. Boragno,
A. Boscaleri,
B. Caccianiga,
S. Caprioli,
F. Cavaliere,
F. Cei,
K. A. Cleary,
F. Columbro,
G. Coppi,
A. Coppolecchia,
D. Corsini,
F. Cuttaia,
G. D'Alessandro,
P. de Bernardis,
G. De Gasperis
, et al. (74 additional authors not shown)
Abstract:
The Large Scale Polarization Explorer (LSPE) is a cosmology program for the measurement of large scale curl-like features (B-modes) in the polarization of the Cosmic Microwave Background. Its goal is to constrain the background of inflationary gravity waves traveling through the universe at the time of matter-radiation decoupling. The two instruments of LSPE are meant to synergically operate by co…
▽ More
The Large Scale Polarization Explorer (LSPE) is a cosmology program for the measurement of large scale curl-like features (B-modes) in the polarization of the Cosmic Microwave Background. Its goal is to constrain the background of inflationary gravity waves traveling through the universe at the time of matter-radiation decoupling. The two instruments of LSPE are meant to synergically operate by covering a large portion of the northern microwave sky. LSPE/STRIP is a coherent array of receivers planned to be operated from the Teide Observatory in Tenerife, for the control and characterization of the low-frequency polarized signals of galactic origin; LSPE/SWIPE is a balloon-borne bolometric polarimeter based on 330 large throughput multi-moded detectors, designed to measure the CMB polarization at 150 GHz and to monitor the polarized emission by galactic dust above 200 GHz. The combined performance and the expected level of systematics mitigation will allow LSPE to constrain primordial B-modes down to a tensor/scalar ratio of $10^{-2}$. We here report the status of the STRIP pre-commissioning phase and the progress in the characterization of the key subsystems of the SWIPE payload (namely the cryogenic polarization modulation unit and the multi-moded TES pixels) prior to receiver integration.
△ Less
Submitted 5 May, 2020; v1 submitted 3 May, 2020;
originally announced May 2020.
-
Wideband 67-116 GHz receiver development for ALMA Band 2
Authors:
P. Yagoubov,
T. Mroczkowski,
V. Belitsky,
D. Cuadrado-Calle,
F. Cuttaia,
G. A. Fuller,
J. -D. Gallego,
A. Gonzalez,
K. Kaneko,
P. Mena,
R. Molina,
R. Nesti,
V. Tapia,
F. Villa,
M. Beltran,
F. Cavaliere,
J. Ceru,
G. E. Chesmore,
K. Coughlin,
C. De Breuck,
M. Fredrixon,
D. George,
H. Gibson,
J. Golec,
A. Josaitis
, et al. (21 additional authors not shown)
Abstract:
ALMA has been operating since 2011, but has not yet been populated with the full suite of intended frequency bands. In particular, ALMA Band 2 (67-90 GHz) is the final band in the original ALMA band definition to be approved for production. We aim to produce a wideband, tuneable, sideband-separating receiver with 28 GHz of instantaneous bandwidth per polarisation operating in the sky frequency ran…
▽ More
ALMA has been operating since 2011, but has not yet been populated with the full suite of intended frequency bands. In particular, ALMA Band 2 (67-90 GHz) is the final band in the original ALMA band definition to be approved for production. We aim to produce a wideband, tuneable, sideband-separating receiver with 28 GHz of instantaneous bandwidth per polarisation operating in the sky frequency range 67-116 GHz. Our design anticipates new ALMA requirements following the recommendations in the 2030 ALMA Development Roadmap. The cryogenic cartridge is designed to be compatible with the ALMA Band 2 cartridge slot, where the coldest components -- the feedhorns, orthomode transducers, and cryogenic low noise amplifiers -- operate at a temperature of 15 K. We use multiple simulation methods and tools to optimise our designs for both the passive optics and the active components. The cryogenic cartridge interfaces with a room temperature cartridge hosting the local oscillator (LO) and the downconverter module. This warm cartridge is largely based on GaAs semiconductor technology and is optimised to match the cryogenic receiver bandwidth with the required instantaneous LO tuning range. Our collaboration has designed, fabricated, and tested multiple technical solutions for each of the components, producing a state-of-the-art receiver covering the full ALMA Band 2 & 3 atmospheric window. The receiver is suitable for deployment on ALMA in the coming years, and is capable of dual-polarisation, sideband-separating observations in intermediate frequency bands spanning 4-18 GHz, for a total of 28 GHz on-sky bandwidth per polarisation channel. We conclude that the 67-116 GHz wideband implementation for ALMA Band 2 is now feasible, and this receiver is a compelling instrumental upgrade that will enhance observational capabilities and scientific reach.
△ Less
Submitted 20 February, 2020; v1 submitted 20 December, 2019;
originally announced December 2019.
-
The STRIP instrument of the Large Scale Polarization Explorer: microwave eyes to map the Galactic polarized foregrounds
Authors:
C. Franceschet,
S. Realini,
A. Mennella,
G. Addamo,
A. Baù,
P. M. Battaglia,
M. Bersanelli,
B. Caccianiga,
S. Caprioli,
F. Cavaliere,
K. A. Cleary,
F. Cuttaia,
F. Del Torto,
V. Fafone,
Z. Farooqui,
R. T. Génova Santos,
T. C. Gaier,
M. Gervasi,
T. Ghigna,
F. Incardona,
S. Iovenitti,
M. Jones,
P. Kangaslahti,
R. Mainini,
D. Maino
, et al. (26 additional authors not shown)
Abstract:
In this paper we discuss the latest developments of the STRIP instrument of the "Large Scale Polarization Explorer" (LSPE) experiment. LSPE is a novel project that combines ground-based (STRIP) and balloon-borne (SWIPE) polarization measurements of the microwave sky on large angular scales to attempt a detection of the "B-modes" of the Cosmic Microwave Background polarization. STRIP will observe a…
▽ More
In this paper we discuss the latest developments of the STRIP instrument of the "Large Scale Polarization Explorer" (LSPE) experiment. LSPE is a novel project that combines ground-based (STRIP) and balloon-borne (SWIPE) polarization measurements of the microwave sky on large angular scales to attempt a detection of the "B-modes" of the Cosmic Microwave Background polarization. STRIP will observe approximately 25% of the Northern sky from the "Observatorio del Teide" in Tenerife, using an array of forty-nine coherent polarimeters at 43 GHz, coupled to a 1.5 m fully rotating crossed-Dragone telescope. A second frequency channel with six-elements at 95 GHz will be exploited as an atmospheric monitor. At present, most of the hardware of the STRIP instrument has been developed and tested at sub-system level. System-level characterization, starting in July 2018, will lead STRIP to be shipped and installed at the observation site within the end of the year. The on-site verification and calibration of the whole instrument will prepare STRIP for a 2-years campaign for the observation of the CMB polarization.
△ Less
Submitted 10 December, 2018;
originally announced December 2018.
-
Wideband 67-116 GHz cryogenic receiver development for ALMA Band 2
Authors:
P. Yagoubov,
T. Mroczkowski,
L. Testi,
C. De Breuck,
A. Gonzalez,
K. Kaneko,
Y. Uzawa,
R. Molina,
V. Tapia,
N. Reyes,
P. Mena,
M. Beltran,
R. Nesti,
F. Cuttaia,
S. Ricciardi,
M. Sandri,
L. Terenzi,
F. Villa,
A. Murk,
M. Kotiranta,
W. McGenn,
D. Cuadrado-Calle,
G. A. Fuller,
D. George,
J. -D. Gallego
, et al. (3 additional authors not shown)
Abstract:
The Atacama Large Millimeter/sub-millimeter Array (ALMA) is already revolutionising our understanding of the Universe. However, ALMA is not yet equipped with all of its originally planned receiver bands, which will allow it to observe over the full range of frequencies from 35-950 GHz accessible through the Earth's atmosphere. In particular Band 2 (67-90 GHz) has not yet been approved for construc…
▽ More
The Atacama Large Millimeter/sub-millimeter Array (ALMA) is already revolutionising our understanding of the Universe. However, ALMA is not yet equipped with all of its originally planned receiver bands, which will allow it to observe over the full range of frequencies from 35-950 GHz accessible through the Earth's atmosphere. In particular Band 2 (67-90 GHz) has not yet been approved for construction. Recent technological developments in cryogenic monolithic microwave integrated circuit (MMIC) high electron mobility transistor (HEMT) amplifier and orthomode transducer (OMT) design provide an opportunity to extend the originally planned on-sky bandwidth, combining ALMA Bands 2 and 3 into one receiver cartridge covering 67-116 GHz.
The IF band definition for the ALMA project took place two decades ago, when 8 GHz of on-sky bandwidth per polarisation channel was an ambitious goal. The new receiver design we present here allows the opportunity to expand ALMA's wideband capabilities, anticipating future upgrades across the entire observatory. Expanding ALMA's instantaneous bandwidth is a high priority, and provides a number of observational advantages, including lower noise in continuum observations, the ability to probe larger portions of an astronomical spectrum for, e.g., widely spaced molecular transitions, and the ability to scan efficiently in frequency space to perform surveys where the redshift or chemical complexity of the object is not known a priori. Wider IF bandwidth also reduces uncertainties in calibration and continuum subtraction that might otherwise compromise science objectives.
Here we provide an overview of the component development and overall design for this wideband 67-116 GHz cryogenic receiver cartridge, designed to operate from the Band 2 receiver cartridge slot in the current ALMA front end receiver cryostat.
△ Less
Submitted 9 December, 2018;
originally announced December 2018.
-
Digital compensation of the side-band-rejection ratio in a fully analog 2SB sub-millimeter receiver
Authors:
R. Rodriguez,
R. Finger,
F. P. Mena,
A. Alvear,
R. Fuentes,
A. Khudchenko,
R. Hesper,
A. M. Baryshev,
N. Reyes,
L. Bronfman
Abstract:
In observational radio astronomy, sideband-separating receivers are preferred, particularly under high atmospheric noise, which is usually the case in the sub-millimeter range. However, obtaining a good rejection ratio between the two sidebands is difficult since, unavoidably, imbalances in the different analog components appear. We describe a method to correct these imbalances without making any…
▽ More
In observational radio astronomy, sideband-separating receivers are preferred, particularly under high atmospheric noise, which is usually the case in the sub-millimeter range. However, obtaining a good rejection ratio between the two sidebands is difficult since, unavoidably, imbalances in the different analog components appear. We describe a method to correct these imbalances without making any change in the analog part of the sideband-separating receiver, specifically, kee** the intermediate-frequency hybrid in place. This opens the possibility of implementing the method in any existing receiver. We have built hardware to demonstrate the validity of the method and tested it on a fully analog receiver operating between 600 and 720GHz. We have tested the stability of calibration and performance vs time and after full resets of the receiver. We have performed an error analysis to compare the digital compensation in two configurations of analog receivers, with and without intermediate frequency (IF) hybrid. An average compensated sideband rejection ratio of 46dB is obtained. Degradation of the compensated sideband rejection ratio on time and after several resets of the receiver is minimal. A receiver with an IF hybrid is more robust to systematic errors. Moreover, we have shown that the intrinsic random errors in calibration have the same impact for configuration without IF hybrid and for a configuration with IF hybrid with analog rejection ratio better than 10dB. Compensated rejection ratios above 40dB are obtained even in the presence of high analog rejection. The method is robust allowing its use under normal operational conditions at any telescope. We also demonstrate that a full analog receiver is more robust against systematic errors. Finally, the error bars associated to the compensated rejection ratio are almost independent of whether IF hybrid is present or not.
△ Less
Submitted 11 June, 2018;
originally announced June 2018.
-
A Calibrated Digital Sideband Separating Spectrometer for Radio Astronomy Applications
Authors:
Ricardo Finger,
Patricio Mena,
Nicolas Reyes,
Rafael Rodriguez,
Leonardo Bronfman
Abstract:
Dual sideband (2SB) receivers are well suited for the spectral observation of complex astronomical signals over a wide frequency range. They are extensively used in radio astronomy, their main advantages being to avoid spectral confusion and to diminish effective system temperature by a factor two with respect to double sideband (DSB) receivers. Using available millimeter-wave analog technology, w…
▽ More
Dual sideband (2SB) receivers are well suited for the spectral observation of complex astronomical signals over a wide frequency range. They are extensively used in radio astronomy, their main advantages being to avoid spectral confusion and to diminish effective system temperature by a factor two with respect to double sideband (DSB) receivers. Using available millimeter-wave analog technology, wideband 2SB receivers generally obtain sideband rejections ratios (SRR) of 10-15dB, insufficient for a number of astronomical applications. We report here the design and implementation of an FPGA-based sideband separating FFT spectrometer. A 4GHz analog front end was built to test the design and measure sideband rejection. The setup uses a 2SB front end architecture, except that the mixer outputs are directly digitized before the IF hybrid, using two 8bits ADCs sampling at 1GSPS. The IF hybrid is implemented on the FPGA together with a set of calibration vectors that, properly chosen, compensate for the analog front end amplitude and phase imbalances. The calibrated receiver exhibits a sideband rejection ratio in excess of 40dB for the entire 2GHz RF bandwidth.
△ Less
Submitted 16 May, 2018;
originally announced May 2018.
-
Experimental testbed for seawater channel characterization
Authors:
Pablo Mena,
Pablo Dorta-Naranjo,
Gara Quintana,
Iván Pérez-Álvarez,
Eugenio Jiménez,
Santiago Zazo,
Marina Pérez,
Laura Cardona,
J. Joaquin Hernández
Abstract:
Shallow seawaters are problematic for acoustic and optical communications. Sensor networks based on electromagnetic (EM) communications are evaluated in this environment. In order to characterize the subaquatic channel, several measurement systems have been designed, built and tested in the sea obtaining very reliable results. Experiments carried out with dipoles and loop antennas showed serious d…
▽ More
Shallow seawaters are problematic for acoustic and optical communications. Sensor networks based on electromagnetic (EM) communications are evaluated in this environment. In order to characterize the subaquatic channel, several measurement systems have been designed, built and tested in the sea obtaining very reliable results. Experiments carried out with dipoles and loop antennas showed serious disagreement with the state of the art, especially when dipole antennas are used. Dipoles performance was poor while magnetic loops showed relevant results. Measurement system is described in detail and real attenuation of the subaquatic channel is obtained for several distances and antennas. Finally, measured and simulated results are compared with good agreement.
△ Less
Submitted 13 April, 2016;
originally announced April 2016.
-
Investigation on Radio Wave Propagation in Shallow Seawater: Simulations and Measurements
Authors:
Eugenio Jimenez,
Gara Quintana,
Pablo Mena,
Pablo Dorta,
Ivan Perez-Alvarez,
Santiago Zazo,
Marina Perez,
Eduardo Quevedo
Abstract:
The authors present full wave simulations and experimental results of propagation of electromagnetic waves in shallow seawaters. Transmitter and receiver antennas are ten-turns loops placed on the seabed. Some propagation frameworks are presented and simulated. Finally, simulation results are compared with experimental ones.
The authors present full wave simulations and experimental results of propagation of electromagnetic waves in shallow seawaters. Transmitter and receiver antennas are ten-turns loops placed on the seabed. Some propagation frameworks are presented and simulated. Finally, simulation results are compared with experimental ones.
△ Less
Submitted 13 April, 2016;
originally announced April 2016.
-
Ultra-pure digital sideband separation at sub-millimeter wavelengths
Authors:
R. Finger,
F. P. Mena,
A. Barishev,
A. Khudchenko,
R. Rodriguez,
E. Huaracan,
A. Alvear,
J. Barkhof,
R. Hesper,
L. Bronfman
Abstract:
Deep spectral-line surveys in the mm and sub-mm range can detect thousands of lines per band uncovering the rich chemistry of molecular clouds, star forming regions and circumstellar envelopes, among others objects. The ability to study the faintest features of spectroscopic observation is, nevertheless, limited by a number of factors. The most important are the source complexity (line density), l…
▽ More
Deep spectral-line surveys in the mm and sub-mm range can detect thousands of lines per band uncovering the rich chemistry of molecular clouds, star forming regions and circumstellar envelopes, among others objects. The ability to study the faintest features of spectroscopic observation is, nevertheless, limited by a number of factors. The most important are the source complexity (line density), limited spectral resolution and insufficient sideband (image) rejection (SRR). Dual Sideband (2SB) millimeter receivers separate upper and lower sideband rejecting the unwanted image by about 15 dB, but they are difficult to build and, until now, only feasible up to about 500 GHz (equivalent to ALMA Band 8). For example ALMA Bands 9 (602-720 GHz) and 10 (787-950 GHz) are currently DSB receivers. Aims: This article reports the implementation of an ALMA Band 9 2SB prototype receiver that makes use of a new technique called calibrated digital sideband separation. The new method promises to ease the manufacturing of 2SB receivers, dramatically increase sideband rejection and allow 2SB instruments at the high frequencies currently covered only by Double Sideband (DSB) or bolometric detectors. Methods: We made use of a Field Programmable Gate Array (FPGA) and fast Analog to Digital Converters (ADCs) to measure and calibrate the receiver's front end phase and amplitude imbalances to achieve sideband separation beyond the possibilities of purely analog receivers. The technique could in principle allow the operation of 2SB receivers even when only imbalanced front ends can be built, particularly at very high frequencies. Results: This digital 2SB receiver shows an average sideband rejection of 45.9 dB while small portions of the band drop below 40 dB. The performance is 27 dB (a factor of 500) better than the average performance of the proof-of-concept Band 9 purely-analog 2SB prototype receiver.
△ Less
Submitted 14 October, 2015; v1 submitted 16 September, 2015;
originally announced September 2015.
-
The ALMA Band 9 receiver - Design, construction, characterization, and first light
Authors:
A. M. Baryshev,
R. Hesper,
F. P. Mena,
T. M. Klapwijk,
T. A. van Kempen,
M. R. Hogerheijde,
B. D. Jackson,
J. Adema,
G. J. Gerlofsma,
M. E. Bekema,
J. Barkhof,
L. H. R. de Haan-Stijkel,
M. van den Bemt,
A. Koops,
K. Keizer,
C. Pieters,
J. Koops van het Jagt,
H. H. A. Schaeffer,
T. Zijlstra,
M. Kroug,
C. F. J. Lodewijk,
K. Wielinga,
W. Boland,
M. W. M. de Graauw,
E. F. van Dishoeck
, et al. (2 additional authors not shown)
Abstract:
We describe the design, construction, and characterization of the Band 9 heterodyne receivers (600-720 GHz) for the Atacama Large Millimeter / submillimeter Array (ALMA). The ALMA Band 9 receiver units ("cartridges"), which are installed in the telescope's front end, have been designed to detect and down-convert two orthogonal linear polarization components of the light collected by the ALMA anten…
▽ More
We describe the design, construction, and characterization of the Band 9 heterodyne receivers (600-720 GHz) for the Atacama Large Millimeter / submillimeter Array (ALMA). The ALMA Band 9 receiver units ("cartridges"), which are installed in the telescope's front end, have been designed to detect and down-convert two orthogonal linear polarization components of the light collected by the ALMA antennas. The light entering the front end is refocused with a compact arrangement of mirrors, which is fully contained within the cartridge. The arrangement contains a grid to separate the polarizations and two beam splitters to combine each resulting beam with a local oscillator signal. The combined beams are fed into independent double-sideband mixers, each with a corrugated feedhorn coupling the radiation by way of a waveguide with backshort cavity into an impedance-tuned SIS junction that performs the heterodyne down-conversion. Finally, the generated intermediate frequency signals are amplified by cryogenic and room-temperature HEMT amplifiers and exported to the telescope's back end for further processing and, finally, correlation. The receivers have been constructed and tested in the laboratory and they show excellent performance, complying with ALMA requirements. Performance statistics on all 73 Band 9 receivers are reported. On-sky characterization and tests of the performance of the Band 9 cartridges are presented using commissioning data.
△ Less
Submitted 6 March, 2015;
originally announced March 2015.
-
The Missing Link: Magnetism and Superconductivity
Authors:
K. S. Burch,
S. V. Dordevic,
F. P. Mena,
D. van der Marel,
J. L. Sarrao,
J. R. Jeffries,
E. D. Bauer,
M. B. Maple,
D. N. Basov
Abstract:
The effect of magnetic moments on superconductivity has long been a controversial subject in condensed matter physics. While Matthias and collaborators experimentally demonstrated the destruction of superconductivity in La by the addition of magnetic moments (Gd), it has since been suggested that magnetic fluctuations are in fact responsible for the development of superconducting order in other…
▽ More
The effect of magnetic moments on superconductivity has long been a controversial subject in condensed matter physics. While Matthias and collaborators experimentally demonstrated the destruction of superconductivity in La by the addition of magnetic moments (Gd), it has since been suggested that magnetic fluctuations are in fact responsible for the development of superconducting order in other systems. Currently this debate is focused on several families of unconventional superconductors including high-Tc cuprates, borocarbides as well as heavy fermion systems where magnetism and superconductivity are known to coexist. Here we report a novel aspect of competition and coexistence of these two competing orders in an interesting class of heavy fermion compounds, namely the 1-1-5 series: CeTIn5 where T=Co, Ir, or Rh. Our optical experiments indicate the existence of regions in momentum space where local moments remain unscreened. The extent of these regions in momentum space appears to control both the normal and superconducting state properties in the 1-1-5 family of heavy fermion (HF) superconductors.
△ Less
Submitted 27 November, 2007; v1 submitted 5 April, 2006;
originally announced April 2006.
-
Suppressed reflectivity due to spin-controlled localization in a magnetic semiconductor
Authors:
F. P. Mena,
J. F. DiTusa,
D. van der Marel,
G. Aeppli,
D. P. Young,
A. Damascelli,
J. A. Mydosh
Abstract:
The narrow gap semiconductor FeSi owes its strong paramagnetism to electron-correlation effects. Partial Co substitution for Fe produces a spin-polarized doped semiconductor. The spin-polarization causes suppression of the metallic reflectivity and increased scattering of charge carriers, in contrast to what happens in other magnetic semiconductors, where magnetic order reduces the scattering. T…
▽ More
The narrow gap semiconductor FeSi owes its strong paramagnetism to electron-correlation effects. Partial Co substitution for Fe produces a spin-polarized doped semiconductor. The spin-polarization causes suppression of the metallic reflectivity and increased scattering of charge carriers, in contrast to what happens in other magnetic semiconductors, where magnetic order reduces the scattering. The loss of metallicity continues progressively even into the fully polarized state, and entails as much as a 25% reduction in average mean-free path. We attribute the observed effect to a deepening of the potential wells presented by the randomly distributed Co atoms to the majority spin carriers. This mechanism inverts the sequence of steps for dealing with disorder and interactions from that in the classic Al'tshuler Aronov approach - where disorder amplifies the Coulomb interaction between carriers - in that here, the Coulomb interaction leads to spin polarization which in turn amplifies the disorder-induced scattering.
△ Less
Submitted 28 November, 2005;
originally announced November 2005.
-
Oxygen isotope effect and phase separation in the optical conductivity of (La$_{0.5}$Pr$_{0.5}$)$_{0.7}$Ca$_{0.3}$MnO$_3$ thin films
Authors:
F. P. Mena,
A. B. Kuzmenko,
A. Hadipour,
J. L. M. van Mechelen,
D. van der Marel,
N. A. Babushkina
Abstract:
The optical conductivities of films of (La$_{0.5}$Pr$_{0.5}$)$_{0.7}$Ca$_{0.3}$MnO$_3$ with different oxygen isotopes ($^{16}$O and $^{18}$O) have been determined in the spectral range from 0.3 to 4.3 eV using a combination of transmission in the mid-infrared and ellipsometry from the near-infrared to ultra-violet regions. We have found that the isotope exchange strongly affects the optical resp…
▽ More
The optical conductivities of films of (La$_{0.5}$Pr$_{0.5}$)$_{0.7}$Ca$_{0.3}$MnO$_3$ with different oxygen isotopes ($^{16}$O and $^{18}$O) have been determined in the spectral range from 0.3 to 4.3 eV using a combination of transmission in the mid-infrared and ellipsometry from the near-infrared to ultra-violet regions. We have found that the isotope exchange strongly affects the optical response in the ferromagnetic phase in a broad frequency range, in contrast to the almost isotope-independent optical conductivity above $T_C$. The substitution by $^{18}$O strongly suppresses the Drude response and a mid-infrared peak while enhancing the conductivity peak at 1.5 eV. A qualitative explanation can be given in terms of the phase separation present in these materials. Moreover, the optical response is similar to the one extracted from measurements in polished samples and other thin films, which signals to the importance of internal strain.
△ Less
Submitted 13 October, 2005;
originally announced October 2005.
-
Ferromagnetism makes a doped semiconductor less shiny
Authors:
F. P. Mena,
J. F. DiTusa,
D. van der Marel,
G. Aeppli,
D. P Young,
C. Presura,
A. Damascelli,
J. A. Mydosh
Abstract:
Magnetic semiconductors have attracted interest because of the question of how a magnetic metal can be derived from a paramagnetic insulator. Here our approach is to carrier dope insulating FeSi and we show that the magnetic half-metal which emerges has unprecedented optical properties, unlike those of other low carrier density magnetic metals. All traces of the semiconducting gap of FeSi are ob…
▽ More
Magnetic semiconductors have attracted interest because of the question of how a magnetic metal can be derived from a paramagnetic insulator. Here our approach is to carrier dope insulating FeSi and we show that the magnetic half-metal which emerges has unprecedented optical properties, unlike those of other low carrier density magnetic metals. All traces of the semiconducting gap of FeSi are obliterated and the material is unique in being less reflective in the ferromagnetic than in the paramagnetic state, corresponding to larger rather than smaller electron scattering in the ordered phase.
△ Less
Submitted 19 October, 2004;
originally announced October 2004.
-
Structural, electronic, and magneto-optical properties of YVO$_3$
Authors:
A. A. Tsvetkov,
F. P. Mena,
P. H. M. van Loosdrecht,
D. van der Marel,
Y. Ren,
A. A. Nugroho,
A. A. Menovsky,
I. S. Elfimov,
G. A. Sawatzky
Abstract:
Optical and magneto-optical properties of YVO$_3$ single crystal were studied in FIR, visible, and UV regions. Two structural phase transitions at 75 K and 200 K were observed and established to be of the first and second order, respectively. The lattice has an orthorhombic $Pbnm$ symmetry both above 200 K as well as below 75 K, and is found to be dimerized monoclinic $Pb11$ in between. We ident…
▽ More
Optical and magneto-optical properties of YVO$_3$ single crystal were studied in FIR, visible, and UV regions. Two structural phase transitions at 75 K and 200 K were observed and established to be of the first and second order, respectively. The lattice has an orthorhombic $Pbnm$ symmetry both above 200 K as well as below 75 K, and is found to be dimerized monoclinic $Pb11$ in between. We identify YVO$_3$ as a Mott-Hubbard insulator with the optical gap of 1.6 eV. The electronic excitations in the visible spectrum are determined by three $d$-bands at 1.8, 2.4, and 3.3 eV, followed by the charge-transfer transitions at about 4 eV. The observed structure is in good agreement with LSDA+$U$ band structure calculations. By using ligand field considerations, we assigned these bands to the transitions to the $^4A_{2g}$, $^2E_{g} + ^2T_{1g}$, and $^2T_{2g}$ states. The strong temperature dependence of these bands is in agreement with the formation of orbital order. Despite the small net magnetic moment of 0.01 $μ_B$ per vanadium, the Kerr effect of the order of $0.01^\circ$ was observed for all three $d$-bands in the magnetically ordered phase $T_{\text{Néel}}<116 K$. A surprisingly strong enhancement of the Kerr effect was found below 75 K, reaching a maximum of $0.1^\circ$. The effect is ascribed to the non-vanishing net orbital magnetic moment.
△ Less
Submitted 12 August, 2003;
originally announced August 2003.
-
Heavy Carriers and Non-Drude Optical Conductivity in MnSi
Authors:
F. P. Mena,
D. van der Marel,
M. Faeth,
A. A. Menovsky,
J. A. Mydosh
Abstract:
Optical properties of the weakly helimagnetic metal MnSi have been determined in the photon energy range from 2 meV to 4.5 eV using the combination of grazing incidence reflectance at 80 degrees (2 meV to 0.8 eV) and ellipsometry (0.8 to 4.5 eV). As the sample is cooled below 100 K the effective mass becomes strongly frequency dependent at low frequencies, while the scattering rate developes a l…
▽ More
Optical properties of the weakly helimagnetic metal MnSi have been determined in the photon energy range from 2 meV to 4.5 eV using the combination of grazing incidence reflectance at 80 degrees (2 meV to 0.8 eV) and ellipsometry (0.8 to 4.5 eV). As the sample is cooled below 100 K the effective mass becomes strongly frequency dependent at low frequencies, while the scattering rate developes a linear frequency dependence. The complex optical conductivity can be described by the phenomenological relation σ(ω,T) \propto (Γ(T)+iω)^{-1/2} used for cuprates and ruthenates.
△ Less
Submitted 28 February, 2003;
originally announced February 2003.
-
Manifestation of multiband optical properties of MgB$_2$
Authors:
A. B. Kuz'menko,
F. P. Mena,
H. J. A. Molegraaf,
D. van der Marel,
B. Gorshunov,
M. Dressel,
I. I. Mazin,
J. Kortus,
O. V. Dolgov,
T. Muranaka,
J. Akimitsu
Abstract:
The optical conductivity of MgB$_2$ has been determined on a dense polycrystalline sample in the spectral range 6 meV - 4.6 eV using a combination of ellipsometric and normal incidence reflectivity measurements. $σ_{1}(ω)$ features a narrow Drude peak with anomalously small plasma frequency (1.4 eV) and a very broad "dome" structure, which comprises the bulk of the low-energy spectral weight. Th…
▽ More
The optical conductivity of MgB$_2$ has been determined on a dense polycrystalline sample in the spectral range 6 meV - 4.6 eV using a combination of ellipsometric and normal incidence reflectivity measurements. $σ_{1}(ω)$ features a narrow Drude peak with anomalously small plasma frequency (1.4 eV) and a very broad "dome" structure, which comprises the bulk of the low-energy spectral weight. This fact can be reconciled with the results of band structure calculations by assuming that charge carriers from the 2D $σ$-bands and the 3D $π$-bands have principally different impurity scattering rates and negligible interband scattering. This also explains a surprisingly small correlation between the defect concentration and $T_c$, expected for a two-gap superconductor. The large 3D carrier scattering rate suggests their proximity to the localization limit.
△ Less
Submitted 20 December, 2001; v1 submitted 4 July, 2001;
originally announced July 2001.
-
Optical measurements of the superconducting gap in MgB2
Authors:
B. Gorshunov,
C. A. Kuntscher,
P. Haas,
M. Dressel,
F. P. Mena,
A. B. Kuz'menko,
D. van der Marel,
T. Muranaka,
J. Akimitsu
Abstract:
Far-infrared reflectivity studies on the polycrystalline intermetallic compound MgB_2 with a superconducting transition temperature T_c=39 K were performed at temperatures 20 K to 300 K. We observe a significant raise of the superconducting-to-normal state reflectivity ratio below 70 cm^{-1}, with a maximum at about 25-30 cm^{-1}, which gives a lower estimate of the superconducting gap of 2Δ(0)\…
▽ More
Far-infrared reflectivity studies on the polycrystalline intermetallic compound MgB_2 with a superconducting transition temperature T_c=39 K were performed at temperatures 20 K to 300 K. We observe a significant raise of the superconducting-to-normal state reflectivity ratio below 70 cm^{-1}, with a maximum at about 25-30 cm^{-1}, which gives a lower estimate of the superconducting gap of 2Δ(0)\approx3-4 meV.
△ Less
Submitted 26 April, 2001; v1 submitted 7 March, 2001;
originally announced March 2001.