Showing 1–45 of 45 results for author: Melnik, N

UCxn: Typologically Informed Annotation of Constructions Atop Universal Dependencies

Authors: Leonie Weissweiler, Nina Böbel, Kirian Guiller, Santiago Herrera, Wesley Scivetti, Arthur Lorenzi, Nurit Melnik, Archna Bhatia, Hinrich Schütze, Lori Levin, Amir Zeldes, Joakim Nivre, William Croft, Nathan Schneider

Abstract: The Universal Dependencies (UD) project has created an invaluable collection of treebanks with contributions in over 140 languages. However, the UD annotations do not tell the full story. Grammatical constructions that convey meaning through a particular combination of several morphosyntactic elements -- for example, interrogative sentences with special markers and/or word orders -- are not labele… ▽ More The Universal Dependencies (UD) project has created an invaluable collection of treebanks with contributions in over 140 languages. However, the UD annotations do not tell the full story. Grammatical constructions that convey meaning through a particular combination of several morphosyntactic elements -- for example, interrogative sentences with special markers and/or word orders -- are not labeled holistically. We argue for (i) augmenting UD annotations with a 'UCxn' annotation layer for such meaning-bearing grammatical constructions, and (ii) approaching this in a typologically informed way so that morphosyntactic strategies can be compared across languages. As a case study, we consider five construction families in ten languages, identifying instances of each construction in UD treebanks through the use of morphosyntactic patterns. In addition to findings regarding these particular constructions, our study yields important insights on methodology for describing and identifying constructions in language-general and language-particular ways, and lays the foundation for future constructional enrichment of UD treebanks. △ Less

Submitted 26 March, 2024; originally announced March 2024.

Comments: LREC-COLING 2024

Spatial properties of the complex decameter type II burst observed on 31 May 2013

Authors: V. V. Dorovskyy, V. N. Melnik, A. A. Konovalenko, A. I. Brazhenko, H. O. Rucker

Abstract: We present the results of observations of complex powerful type II burst associated with narrow Earth-directed CME, which was ejected at around 11 UT on 31 May 2013. The observations were performed by radio telescope UTR-2, which operated as local interferometer, providing the possibility of detection of the spatial parameters of the radio emission source. There are also polarization data from URA… ▽ More We present the results of observations of complex powerful type II burst associated with narrow Earth-directed CME, which was ejected at around 11 UT on 31 May 2013. The observations were performed by radio telescope UTR-2, which operated as local interferometer, providing the possibility of detection of the spatial parameters of the radio emission source. There are also polarization data from URAN-2 radio telescope. The CME was detected by two space-born coronagraphs SOHO/LASCO/C2 and STEREO/COR1-BEHIND, and was absolutely invisible for STEREO-AHEAD spacecraft. The associated type II burst consisted of two successive parts of quite different appearance on the dynamic spectrum. The first burst was narrow in frequency, had cloudy structure and was completely unpolarized while the second one represented rich herring-bone structure and exposed high degree of circular polarization. Both parts of the whole event reveal band splitting and well distinguished harmonic structure. The positions and sizes of the sources of the type II burst were found using cross-correlation functions of interferometer bases. The sources of the type II bursts elements were found to be of about 15 arcmin in size in average, with the smallest ones reaching as low as 10 arcmin. Corresponding brightness temperatures were estimated. In most cases these temperatures were between $10^{11}$ and $10^{12}$ K with maximum value as high as $10^{14}$ K. The spatial displacement of the source was measured and model independent velocities of the type II burst sources were determined. △ Less

Submitted 1 August, 2023; originally announced August 2023.

Comments: 8 pages, 8 figures,

Journal ref: Sun and Geosphere, vol.13, no.1, p.25-30, (2018)

Corrections to scaling in the 3D Ising model: a comparison between MC and MCRG results

Authors: J. Kaupuzs, R. V. N. Melnik

Abstract: Corrections to scaling in the 3D Ising model are studied based on Monte Carlo (MC) simulation results for very large lattices with linear lattice sizes up to L=3456. Our estimated values of the correction-to-scaling exponent omega tend to decrease below the usually accepted value about 0.83 when the smallest lattice sizes are discarded from the fits. This behavior apparently confirms some of the k… ▽ More Corrections to scaling in the 3D Ising model are studied based on Monte Carlo (MC) simulation results for very large lattices with linear lattice sizes up to L=3456. Our estimated values of the correction-to-scaling exponent omega tend to decrease below the usually accepted value about 0.83 when the smallest lattice sizes are discarded from the fits. This behavior apparently confirms some of the known estimates of the Monte Carlo renormalization group (MCRG) method, i.e., omega about 0.7 and omega = 0.75(5). We discuss the possibilities that omega is either really smaller than usually expected or these values of omega describe some transient behavior. We propose refining MCRG simulations and analysis to resolve this issue. In distinction from omega, our actual MC estimations of the critical exponents eta and nu provide stable values eta=0.03632(13) and nu=0.63017(31), which well agree with those of the conformal bootstrap method, i.e., eta=0.0362978(20) and nu=0.6299709(40). △ Less

Submitted 5 July, 2022; v1 submitted 9 June, 2022; originally announced June 2022.

Comments: + Extended discussion and new references. 16 pages, 6 tables, 3 figures

Solar Type U Burst Associated with a High Coronal Loop

Authors: V. V. Dorovskyy, V. N. Melnik, A. A. Konovalenko, S. N. Yerin, I. N. Bubnov

Abstract: An inverted U burst with equally developed ascending and descending branches observed by Giant Ukrainian Radio Telescope (GURT) on 18 April 2017 in meter wavelengths band is discussed. This U burst was attributed to the high coronal loop above the limb active region NOAA 12651. Under the assumption that, associated with the burst, the coronal loop confines isothermal plasma stratified according to… ▽ More An inverted U burst with equally developed ascending and descending branches observed by Giant Ukrainian Radio Telescope (GURT) on 18 April 2017 in meter wavelengths band is discussed. This U burst was attributed to the high coronal loop above the limb active region NOAA 12651. Under the assumption that, associated with the burst, the coronal loop confines isothermal plasma stratified according to a Boltzmann density relation, the geometrical and physical parameters of the loop were estimated. According to our model coronal loops may contain plasma which is up to 20 times denser than the surrounding coronal plasma. In general the proposed model gives the relation between the plasma temperature and the height of the loop in such a way that under the given parameters of the associated U burst, higher loops contain cooler plasma and vice versa. An alternative method of coronal loop height determination was suggested. Assuming that the observed U burst and the preceding type III burst were generated by the same exciter we define the height of the loop from the delay of the former with respect to the latter at certain frequency. We show that defining of coronal loops heights by another independent method, e.g. interferometric or tied-array imaging may solve the uncertainty of the inside-the-loop plasma temperature determination. △ Less

Submitted 16 December, 2020; originally announced December 2020.

Properties of Type III and Type IIIb Bursts in the Frequency Band of 8-80 MHz during PSP Perihelion at the Beginning of April 2019

Authors: V. N. Melnik, A. I. Brazhenko, A. A. Konovalenko, A. V. Frantsuzenko, S. M. Yerin, V. V. Dorovskyy, I. M. Bubnov

Abstract: Properties of type III and type IIIb bursts in the frequency band of 8-80 MHz observed by the radio telescopes Ukrainian Radio Interferometer of NASU-2 (URAN-2) (Poltava) and Giant Ukrainian Radio Telescope (GURT) (Kharkiv) during the Parker Solar Probe (PSP) perihelion in April 2019 are discussed. These correspond of those that were observed by PSP at frequencies <19 MHz. We analyze dependences o… ▽ More Properties of type III and type IIIb bursts in the frequency band of 8-80 MHz observed by the radio telescopes Ukrainian Radio Interferometer of NASU-2 (URAN-2) (Poltava) and Giant Ukrainian Radio Telescope (GURT) (Kharkiv) during the Parker Solar Probe (PSP) perihelion in April 2019 are discussed. These correspond of those that were observed by PSP at frequencies <19 MHz. We analyze dependences of drift rates and durations on frequency for these bursts. We show that drift rate dependences on frequency agree well with those derived from the Newkirk corona if source velocities are between 0.17 and 0.2 c for both type IIIb bursts and type III bursts under the assumption that the first ones are fundamentals and the second ones are their harmonics. However, all observational dependences are flatter in comparison with the dependences for a Newkirk corona. We assume that this can be related with coronal temperature decreasing at heliocentric distances from 1.35 to 6.5 solar radii. Duration dependencies of type IIIb and type III bursts on frequency in the range of 10-70 MHz are also obtained. We note that the durations and drift rates of type III bursts as well as their dependences on frequency differ essentially from those for type IIIb bursts. △ Less

Submitted 15 December, 2020; originally announced December 2020.

Comments: 16 pages, 12 figures

Radio signature of a distant behind-the-limb CME on 2017 September 6

Authors: V. N. Melnik, H. O. Rucker, A. I. Brazhenko, M. Panchenko, A. A. Konovalenko, A. V. Frantsuzenko, V. V. Dorovskyy, M. V. Shevchuk

Abstract: We discuss properties of a Type IV burst, which was observed on 2017 September 6, as a result of the powerful flare X 9.3. At decameter wavelengths this burst was observed by the radio telescopes STEREO A, URAN-2, and NDA at frequencies 5 - 35 MHz. This moving Type IV burst was associated with a coronal mass ejection (CME) propagating in the southwest direction with a speed of 1570 km/s. The maxim… ▽ More We discuss properties of a Type IV burst, which was observed on 2017 September 6, as a result of the powerful flare X 9.3. At decameter wavelengths this burst was observed by the radio telescopes STEREO A, URAN-2, and NDA at frequencies 5 - 35 MHz. This moving Type IV burst was associated with a coronal mass ejection (CME) propagating in the southwest direction with a speed of 1570 km/s. The maximum radio flux of this burst was about 300 s.f.u. and the polarization was more than 40%. In the frequency range of 8-33 MHz it continued for more than 2 hr. For STEREO A the associated CME was behind the limb, its longitudinal angle was about 160 degrees. This moving Type IV burst was observed by STEREO A at frequencies of 5-15 MHz in spite of the low sensitivity of STEREO A. This means that the radio emission directivity of a Type IV burst is rather wide. Assuming the plasma mechanism of Type IV radio emission we derived the plasma density distribution in the CME core at distances of 5.6 Rs and 9.8 Rs and its mass to be about 10^16 g . It is planned that the minimum perihelion of the Parker Solar Probe (PSP) spacecraft will be at about 9 Rs. So we discuss in what conditions PSP will be in if it crosses a similar CME core. △ Less

Submitted 8 December, 2020; originally announced December 2020.

Comments: 9 pages, 6 figures, 1 table

A new class of discontinuous solar wind solutions

Authors: Bidzina M. Shergelashvili, Velentin N. Melnik, Grigol Dididze, Horst Fichtner, Günter Brenn, Stefaan Poedts, Holger Foysi, Maxim L. Khodachenko, Teimuraz V. Zaqarashvili

Abstract: A new class of one-dimensional solar wind models is developed within the general polytropic, single-fluid hydrodynamic framework. The particular case of quasi-adiabatic radial expansion with a localized heating source is considered. We consider analytical solutions with continuous Mach number over the entire radial domain while allowing for jumps in the flow velocity, density, and temperature, pro… ▽ More A new class of one-dimensional solar wind models is developed within the general polytropic, single-fluid hydrodynamic framework. The particular case of quasi-adiabatic radial expansion with a localized heating source is considered. We consider analytical solutions with continuous Mach number over the entire radial domain while allowing for jumps in the flow velocity, density, and temperature, provided that there exists an external source of energy in the vicinity of the critical point which supports such jumps in physical quantities. This is substantially distinct from both the standard Parker solar wind model and the original nozzle solutions, where such discontinuous solutions are not permissible. We obtain novel sample analytic solutions of the governing equations corresponding to both slow and fast wind. △ Less

Submitted 13 May, 2020; originally announced May 2020.

Comments: 13 pages, 3 figures, MNRAS, Accepted for publication

First observation of the solar Type III burst decay and its interpretation

Authors: Valentin N. Melnik, Alexandr A. Konovalenko, Sergey M. Yerin, Igor M. Bubnov, Anatoliy I. Brazhenko, Anatoliy V. Frantsuzenko, Vladimir V. Dorovskyy, Mykola V. Shevchuk, Helmut O. Rucker

Abstract: A decay of Type III burst into two Type III bursts was registered during solar observations by GURT and URAN-2 radio telescopes on April 18, 2017. Such phenomenon was observed for the first time. Newborn Type III bursts have drift rates smaller than that of decaying Type III burst. Such decays of Type III bursts were predicted by a gas-dynamic theory of high-energy electron beams propagating throu… ▽ More A decay of Type III burst into two Type III bursts was registered during solar observations by GURT and URAN-2 radio telescopes on April 18, 2017. Such phenomenon was observed for the first time. Newborn Type III bursts have drift rates smaller than that of decaying Type III burst. Such decays of Type III bursts were predicted by a gas-dynamic theory of high-energy electron beams propagating through the thermal background plasma. In the frame of this theory Type III sources are beam-plasma structures moving with constant velocities. In our case the sum of velocities of newborn Type III sources equals the velocity of decaying Type III source. The last one is 0.33c in the case of fundamental radio emission and 0.2c at the harmonic radio emission of Type III burst. The density ratio of slow and fast newborn Type III sources is about 3. △ Less

Submitted 28 September, 2019; originally announced September 2019.

Comments: 11 pages, 5 figures

Comparative analysis of solar radio bursts before and during CME propagation

Authors: G. Dididze, B. M. Shergelashvili, V. N. Melnik, V. V. Dorovskyy, A. I. Brazhenko, S. Poedts, T. V. Zaqarashvili, M. Khodachenko

Abstract: As is well known, CME propagation often results in the fragmentation of the solar atmosphere on smaller regions of density (magnetic field) enhancement (depletion). It is expected that this type of fragmentation may have radio signatures. The general aim of the present paper is to perform a comparative analysis of type III solar and narrow-band type-III-like radio burst properties before and durin… ▽ More As is well known, CME propagation often results in the fragmentation of the solar atmosphere on smaller regions of density (magnetic field) enhancement (depletion). It is expected that this type of fragmentation may have radio signatures. The general aim of the present paper is to perform a comparative analysis of type III solar and narrow-band type-III-like radio burst properties before and during CME events, respectively. The main goal is to analyze radio observational signatures of the dynamical processes in solar corona. In particular, we aim to perform a comparison of local plasma parameters without and with CME propagation, based on the analysis of decameter radio emission data. We performed a comparison of usual type III bursts before the CME with narrow-band type-III-like bursts, which are observationally detectable on top of the background type IV radio bursts associated with CME propagation. We focused on the analysis of in total 429 type III and 129 narrow-band type-III-like bursts. We studied their main characteristic parameters such as frequency drift rate, duration, and instantaneous frequency bandwidth using standard statistical methods. Furthermore, we inferred local plasma parameters using known definitions of frequency drift, duration, and instantaneous frequency bandwidth.The analysis reveals that the physical parameters of coronal plasma before CMEs considerably differ from those during the propagation of CMEs (the observational periods 2 and 4 with type IV radio bursts associated with CMEs). Local density radial profiles and the characteristic spatial scales of radio emission sources vary with radial distance more drastically during the CME propagation compared to the cases of quasistatic solar atmosphere without CME(s) (observational periods 1 and 3). The results of the work enable us to distinguish different regimes of plasma state in the solar corona. △ Less

Submitted 28 March, 2019; originally announced March 2019.

Comments: 10 pages, 8 figures, Astronomy and Astrophysics, accepted for publication

Journal ref: A&A 625, A63 (2019)

Interferometric Observations of the Quiet Sun at 20 and 25 MHz in May 2014

Authors: V. N. Melnik, V. A. Shepelev, S. Poedts, V. V. Dorovskyy, A. I. Brazhenko, H. O. Rucker

Abstract: Results of solar observations at 20 and 25 MHz by the UTR-2 (\textit{Ukrainian T-shaped Radio telescope of the second modification}) radio telescope in the interferometric session from 27 May to 2 June 2014 are presented. In such a case the different baselines 225, 450, and 675 m between sections of East--West and North--South arms of the radio telescope UTR-2 were used. On 29 May 2014, strong spo… ▽ More Results of solar observations at 20 and 25 MHz by the UTR-2 (\textit{Ukrainian T-shaped Radio telescope of the second modification}) radio telescope in the interferometric session from 27 May to 2 June 2014 are presented. In such a case the different baselines 225, 450, and 675 m between sections of East--West and North--South arms of the radio telescope UTR-2 were used. On 29 May 2014, strong sporadic radio emission consisting of Type III, a Type II and a Type IV bursts was observed. On other days there was no solar radio activity in the decameter range. We discuss the results of observations of such the quiet Sun. Fluxes and sizes of the Sun in East--West and North--South directions were measured. The average fluxes were 1050--1100 Jy and 1480--1570 Jy at 20 and 25 MHz, respectively. Angular sizes of the quiet Sun in equatorial and polar directions were 55' and 49' at 20 MHz and 50' and 42' at 25 MHz. Brightness temperatures of radio emission were Tb = 5.1 10^5 K and Tb = 5.7 10^5 K at 20 and 25 MHz, respectively. △ Less

Submitted 22 June, 2018; originally announced June 2018.

Comments: 12 pages, 7 figures

Decameter Type IV Burst Associated with a behind-the-limb CME Observed on 7 November 2013

Authors: V. N. Melnik, A. I. Brazhenko, A. A. Konovalenko, V. V. Dorovskyy, H. O. Rucker, M. Panchenko, A. V. Frantsuzenko, M. V. Shevchuk

Abstract: We report on the results of observations of a type IV burst by URAN-2 (Ukrainian Radio interferometer of Academy Scienses) in the frequency range 22 - 33 MHz, which is associated with the CME (coronal mass ejection) initiated by a behind-the-limb active region (N05E151). This burst was observed also by the radio telescope NDA (Nancay Decameter Array) in the frequency band 30 - 60 MHz. The purpose… ▽ More We report on the results of observations of a type IV burst by URAN-2 (Ukrainian Radio interferometer of Academy Scienses) in the frequency range 22 - 33 MHz, which is associated with the CME (coronal mass ejection) initiated by a behind-the-limb active region (N05E151). This burst was observed also by the radio telescope NDA (Nancay Decameter Array) in the frequency band 30 - 60 MHz. The purpose of the article is the determination of the source of this type IV burst. After analysis of the observational data obtained with the URAN-2, NDA, STEREO (Solar-Terrestrial Relations Observatory) A and B spacecraft, and SOHO (Solar and Heliospheric Observatory)spacecraft we come to the conclusion that it is a core of a behind-the-limb CME. We conclude that the radio emission can escape the center of the CME core at a frequency of 60 MHz and originates from the periphery of the core at frequency 30 MHz due to occultation by the solar corona at corresponding frequencies. We find plasma densities in these regions supposing the plasma mechanism of radio emission. We show that the frequency drift of the start of the type IV burst is governed by an expansion of the CME core. Type III bursts, which were observed against this type IV burst, are shown to be generated by fast electrons propagating through the CME core plasma. A type II burst registered at frequencies 44 - 64 MHz and 3 - 16 MHz was radiated by a shock with a velocity of about 1000 km s^{-1} and 800 km s^{-1}, respectively. △ Less

Submitted 3 March, 2018; originally announced March 2018.

Comments: 10pages, 8 Figures

Decameter Type III Bursts with Changing Frequency Drift-Rate Signs

Authors: V. N. Melnik, A. I. Brazhenko, A. A. Konovalenko, C. Briand, V. V. Dorovskyy, P. Zarka, A. V. Frantsuzenko, H. O. Rucker, B. P. Rutkevych, M. Panchenko, L. Denis, T. Zaqarashvili, B. Shergelashvili

Abstract: We discuss properties of type III bursts which change sign of their drift rate from negative to positive and vice versa. Moreover such bursts may change sign of their drift rates more than once. These specific type III bursts were observed simultaneously by radio telescopes UTR-2, URAN-2 and NDA in frequency band 8-41 MHz. The negative drift rates of these bursts are close to those of usual decame… ▽ More We discuss properties of type III bursts which change sign of their drift rate from negative to positive and vice versa. Moreover such bursts may change sign of their drift rates more than once. These specific type III bursts were observed simultaneously by radio telescopes UTR-2, URAN-2 and NDA in frequency band 8-41 MHz. The negative drift rates of these bursts are close to those of usual decameter type III bursts and variate from -0.84 MHz/s to -5.56 MHz/s. The positive drift rates of specific type III bursts vary in the wider range from 0.44MHz/s to 12 MHz/s. Unlike inverted U-bursts these type III bursts still drift from the high frequencies to the low frequencies in spite of the change of the drift rates signs. Our basic explanation of the positive drift rate of these type III burst differs from the common assumption that positive drift rates of Type III bursts are connected with electron beam propagation towards the Sun. We propose that, even if electron beams move outward from the Sun, they can generate type III bursts with positive drift rates if in some regions of the solar corona the group velocities of type III radio emissions are lower than the velocities of the electron beams. △ Less

Submitted 22 February, 2018; originally announced February 2018.

Comments: 11 pages, 5 figures

Journal ref: Solar Physics, Volume 290, Issue 1, pp.193-203 (2015)

Solar Type IV bursts at frequencies 10-30 MHz

Authors: V. N. Melnik, H. O. Rucker, A. A. Konovalenko, V. V. Dorovskyy, E. P. Abranin, A. I. Brazhenko, B. Thide, A. A. Stanislavskyy

Abstract: The results of the first observations of Type IV bursts at frequencies 10-30 MHz are presented. These observations were carried out at radio telescopes UTR-2 (Kharkov, Ukraine) and URAN-2 (Poltava, Ukraine) during the period 2003-2006. Detection of Type IV bursts in wide band from 10 to 30MHz with high sensitivity and time resolution allowed to study their properties in details. These bursts have… ▽ More The results of the first observations of Type IV bursts at frequencies 10-30 MHz are presented. These observations were carried out at radio telescopes UTR-2 (Kharkov, Ukraine) and URAN-2 (Poltava, Ukraine) during the period 2003-2006. Detection of Type IV bursts in wide band from 10 to 30MHz with high sensitivity and time resolution allowed to study their properties in details. These bursts have fluxes 10-2000s.f.u. at maximum phase. Their durations are about 1-2 hours and even more. Some of Type IV bursts drift from high to low frequencies with drift rates about 10kHz/s. All observed Type IV bursts have fine structures in the form of sub-bursts with durations from 2s to 20s and frequency drift rates in a majority of 1-2MHz/s. In most cases, sub-bursts with negative drift rates were registered. Sometimes sub-bursts in absorption with durations 10-200s against Type IV burst background have been observed. The Type IV burst observed on July 22, 2004 had zebra structure, in which single zebra stripes had positive, negative and infinite drift rates. △ Less

Submitted 17 February, 2018; originally announced February 2018.

Comments: 51 pages, 72 figures

Journal ref: Solar Physics Research Trends, Edited by **zhi Wang. ISBN 1-60021-987-x. Nova Publishers, pp. 287-325 (2008)

Properties of Decameter IIIb-III Pairs

Authors: V. N. Melnik, A. I. Brazhenko, A. V. Frantsuzenko, V. V. Dorovskyy, H. O. Rucker

Abstract: A large number of Type IIIb-III pairs, in which the first component is a Type IIIb burst and the second one is a Type III burst, are often recorded during decameter Type III burst storms. From the beginning of their observation, the question of whether the components of these pairs are the first and the second harmonics of radio emission or not has remained open. We discuss properties of decameter… ▽ More A large number of Type IIIb-III pairs, in which the first component is a Type IIIb burst and the second one is a Type III burst, are often recorded during decameter Type III burst storms. From the beginning of their observation, the question of whether the components of these pairs are the first and the second harmonics of radio emission or not has remained open. We discuss properties of decameter IIIb-III pairs in detail to answer this question. The components of these pairs, Type IIIb bursts and Type III bursts, have essentially different durations and polarizations. At the same time their frequency drift rates are rather close, provided that the drift rates of Type IIIb bursts are a little larger those of Type III bursts at the same frequency. Frequency ratios of the bursts at the same moment are close to two. This points at a harmonic connection of the components in IIIb-III pairs. At the same time there was a serious difficulty, namely why the first harmonic had fine frequency structure in the form of striae and the second harmonic did not have it. Recently Loi, Cairns, and Li ( Astrophys. J. 790, 67, 2014) succeeded in solving this problem. The physical aspects of observational properties of decameter IIIb-III pairs are discussed and pros and cons of harmonic character of Type IIIb bursts and Type III bursts in IIIb-III pairs are presented. We conclude that practically all properties of the IIIb-III pair components can be understood in the framework of the harmonic relation of the components of the IIIb-III pairs. △ Less

Submitted 17 February, 2018; originally announced February 2018.

Comments: 18 pages, 11 figures

Journal ref: Solar Physics, Volume 293, Issue 2, article id. #26, 15 pp.(2018)

Imaging Spectroscopy of Solar Radio Burst Fine Structures

Authors: E. P. Kontar, S. Yu, A. A. Kuznetsov, A. G. Emslie, B. Alcock, N. L. S. Jeffrey, V. N. Melnik, N. H. Bian, P. Subramanian

Abstract: Solar radio observations provide a unique diagnostic of the outer solar atmosphere. However, the inhomogeneous turbulent corona strongly affects the propagation of the emitted radio waves, so decoupling the intrinsic properties of the emitting source from the effects of radio-wave propagation has long been a major challenge in solar physics. Here we report quantitative spatial and frequency charac… ▽ More Solar radio observations provide a unique diagnostic of the outer solar atmosphere. However, the inhomogeneous turbulent corona strongly affects the propagation of the emitted radio waves, so decoupling the intrinsic properties of the emitting source from the effects of radio-wave propagation has long been a major challenge in solar physics. Here we report quantitative spatial and frequency characterization of solar radio burst fine structures observed with the LOw Frequency Array (LOFAR), an instrument with high time resolution that also permits imaging at scales much shorter than those corresponding to radio-wave propagation in the corona. The observations demonstrate that radio-wave propagation effects, and not the properties of the intrinsic emission source, dominate the observed spatial characteristics of radio burst images. These results permit more accurate estimates of source brightness temperatures, and open opportunities for quantitative study of the mechanisms that create the turbulent coronal medium through which the emitted radiation propagates. △ Less

Submitted 21 February, 2018; v1 submitted 22 August, 2017; originally announced August 2017.

Comments: 20 pages, 9 figures

Journal ref: Nature Communications 8, Article number: 1515 (2017)

Oscillation of solar radio emission at coronal acoustic cut-off frequency

Authors: O. S. Pylaev, T. V. Zaqarashvili, A. I. Brazhenko, V. N. Melnik, A. Hanslmeier, M. Panchenko

Abstract: Recent SECCHI COR2 observations on board STEREO-A spacecraft have detected density structures at a distance of 2.5--15~R propagating with periodicity of about 90~minutes. The observations show that the density structures probably formed in the lower corona. We used the large Ukrainian radio telescope URAN-2 to observe type IV radio bursts in the frequency range of 8--32~MHz during the time interva… ▽ More Recent SECCHI COR2 observations on board STEREO-A spacecraft have detected density structures at a distance of 2.5--15~R propagating with periodicity of about 90~minutes. The observations show that the density structures probably formed in the lower corona. We used the large Ukrainian radio telescope URAN-2 to observe type IV radio bursts in the frequency range of 8--32~MHz during the time interval of 08:15--11:00~UT on August 1, 2011. Radio emission in this frequency range originated at the distance of 1.5--2.5 R according to the Baumbach-Allen density model of the solar corona. Morlet wavelet analysis showed the periodicity of 80~min in radio emission intensity at all frequencies, which demonstrates that there are quasi-periodic variations of coronal density at all heights. The observed periodicity corresponds to the acoustic cut-off frequency of stratified corona at a temperature of 1~MK. We suggest that continuous perturbations of the coronal base in the form of jets/explosive events generate acoustic pulses, which propagate upwards and leave the wake behind oscillating at the coronal cut-off frequency. This wake may transform into recurrent shocks due to the density decrease with height, which leads to the observed periodicity in the radio emission. The recurrent shocks may trigger quasi-periodic magnetic reconnection in helmet streamers, where the opposite field lines merge and consequently may generate periodic density structures observed in the solar wind. △ Less

Submitted 29 March, 2017; originally announced March 2017.

Comments: 10 pages, 6 figures, accepted in A&A

Journal ref: A&A 601, A42 (2017)

Unusual Solar Radio Burst Observed at Decameter Wavelengths

Authors: V. N. Melnik, A. I. Brazhenko, A. A. Konovalenko, H. O. Rucker, A. V. Frantsuzenko, V. V. Dorovskyy, M. Panchenko, A. A. Stanislavskyy

Abstract: An unusual solar burst was observed simultaneously by two decameter radio telescopes UTR-2 (Kharkov, Ukraine) and URAN-2 (Poltava, Ukraine) on 3 June 2011 in the frequency range 16-28 MHz. The observed radio burst has some unusual properties, which are not typical for the other types of solar radio bursts. The frequency drift rate of it was positive (about 500 kHz s$^{-1}$) at frequencies higher t… ▽ More An unusual solar burst was observed simultaneously by two decameter radio telescopes UTR-2 (Kharkov, Ukraine) and URAN-2 (Poltava, Ukraine) on 3 June 2011 in the frequency range 16-28 MHz. The observed radio burst has some unusual properties, which are not typical for the other types of solar radio bursts. The frequency drift rate of it was positive (about 500 kHz s$^{-1}$) at frequencies higher than 22 MHz and negative (100 kHz s$^{-1}$) at lower frequencies. The full duration of this event varies from 50 s up to 80 s, depending on the frequency. The maximum radio flux of the unusual burst reaches $\approx 10^3$ s.f.u and its polarization does not exceed 10%. This burst has a fine frequency-time structure of unusual appearance. It consists of stripes with the frequency bandwidth 300-400 kHz. We consider that several accompanied radio and optical events observed by SOHO and STEREO spacecraft are possibly associated with the reported radio burst. A model that may interpret the observed unusual solar radio burst is proposed. △ Less

Submitted 27 August, 2015; originally announced August 2015.

Comments: Published in Solar Physics. The final publication is available at http://link.springer.com/article/10.1007%2Fs11207-013-0328-2

Journal ref: Solar Phys Volume 289, Issue 1, pp 263-278, 2014

Fine and superfine structure of Decameter-Hectometer type II burst on 2011 June 7

Authors: V. V. Dorovskyy, V. N. Melnik, A. A. Konovalenko, A. I. Brazhenko, M. Panchenko, S. Poedts, V. A. Mykhaylov

Abstract: The characteristics of the type II bursts with herringbone structure observed both by ground based radio telescopes (UTR-2, URAN-2) and spaceborn spectrometers (STEREO A-B) are discussed. The burst was recorded on 7 June, 2011 in the frequency band 3--33~MHz. It was characterized by extremely rich fine structure. The statistical analysis of more than 300 herringbone sub-bursts constituting the bur… ▽ More The characteristics of the type II bursts with herringbone structure observed both by ground based radio telescopes (UTR-2, URAN-2) and spaceborn spectrometers (STEREO A-B) are discussed. The burst was recorded on 7 June, 2011 in the frequency band 3--33~MHz. It was characterized by extremely rich fine structure. The statistical analysis of more than 300 herringbone sub-bursts constituting the burst was performed separately for the positively (reverse) and negatively (forward) drifting sub-bursts. The sense and the degree of circular polarization of the herringbone sub-bursts were measured in the respectively wide frequency band (16--32~MHz). A second order fine frequency structure of the herringbone sub-bursts was firstly observed and processed. Using STEREO COR1 (A,B) and SOHO LASCO C2 images the direction and radial speed of the CME responsible for the studied type II burst were determined. The possible location of the type II burst source on the flank of the shock was found. △ Less

Submitted 27 August, 2015; originally announced August 2015.

Comments: Published in Solar Physics. The final publication is available at http://link.springer.com/article/10.1007%2Fs11207-015-0725-9

Journal ref: Solar Physics, Volume 290, Issue 7, pp 2031-2042, 2015

Corrections to finite-size scaling in the 3D Ising model based on non-perturbative approaches and Monte Carlo simulations

Authors: J. Kaupuzs, R. V. N. Melnik, J. Rimsans

Abstract: Corrections to scaling in the 3D Ising model are studied based on non-perturbative analytical arguments and Monte Carlo (MC) simulation data for different lattice sizes L. Analytical arguments show the existence of corrections with the exponent (gamma-1)/nu (approximately 0.38), the leading correction-to-scaling exponent being omega =< (gamma-1)/nu. A numerical estimation of omega from the suscept… ▽ More Corrections to scaling in the 3D Ising model are studied based on non-perturbative analytical arguments and Monte Carlo (MC) simulation data for different lattice sizes L. Analytical arguments show the existence of corrections with the exponent (gamma-1)/nu (approximately 0.38), the leading correction-to-scaling exponent being omega =< (gamma-1)/nu. A numerical estimation of omega from the susceptibility data within 40 =< L =< 2048 yields omega=0.25(33). It is consistent with the statement omega =< (gamma-1)/nu, as well as with the value omega = 1/8 of the GFD theory. We reconsider the MC estimation of omega from smaller lattice sizes to show that it does not lead to conclusive results, since the obtained values of omega depend on the particular method chosen. In particular, estimates ranging from omega =1.274(72) to omega=0.18(37) are obtained by four different finite-size scaling methods, using MC data for thermodynamic average quantities, as well as for partition function zeros. We discuss the influence of omega on the estimation of exponents eta and nu. △ Less

Submitted 11 July, 2014; originally announced July 2014.

Comments: 18 pages, 2 figures, 13 tables

Corrections to finite--size scaling in the phi^4 model on square lattices

Authors: J. Kaupuzs, R. V. N. Melnik, J. Rimsans

Abstract: Corrections to scaling in the two-dimensional scalar phi^4 model are studied based on non-perturbative analytical arguments and Monte Carlo (MC) simulation data for different lattice sizes L (from 4 to 1536) and different values of the phi^4 coupling constant lambda, i.~e., lambda = 0.1, 1, 10. According to our analysis, amplitudes of the nontrivial correction terms with the correction-to-scaling… ▽ More Corrections to scaling in the two-dimensional scalar phi^4 model are studied based on non-perturbative analytical arguments and Monte Carlo (MC) simulation data for different lattice sizes L (from 4 to 1536) and different values of the phi^4 coupling constant lambda, i.~e., lambda = 0.1, 1, 10. According to our analysis, amplitudes of the nontrivial correction terms with the correction-to-scaling exponents omega_l < 1 become small when approaching the Ising limit (lambda --> infinity), but such corrections generally exist in the 2D phi^4 model. Analytical arguments show the existence of corrections with the exponent 3/4. The numerical analysis suggests that there exist also corrections with the exponent 1/2 and, very likely, also corrections with the exponent about 1/4, which are detectable at lambda = 0.1. The numerical tests clearly show that the structure of corrections to scaling in the 2D phi^4 model differs from the usually expected one in the 2D Ising model. △ Less

Submitted 14 May, 2015; v1 submitted 29 June, 2014; originally announced June 2014.

Comments: 25 pages, 8 figures, 8 tables. This is a completed version, including a new theorem and new numerical data and analysis

Correlation functions, universal ratios and Goldstone mode singularities in n-vector models

Authors: J. Kaupuzs, R. V. N. Melnik, J. Rimsans

Abstract: Correlation functions in the O(n) models below the critical temperature are considered. Based on Monte Carlo (MC) data, we confirm the fact stated earlier by Engels and Vogt, that the transverse two-plane correlation function of the O(4) model for lattice sizes about L=120 and small external fields h is very well described by a Gaussian approximation. However, we show that fits of not lower qualit… ▽ More Correlation functions in the O(n) models below the critical temperature are considered. Based on Monte Carlo (MC) data, we confirm the fact stated earlier by Engels and Vogt, that the transverse two-plane correlation function of the O(4) model for lattice sizes about L=120 and small external fields h is very well described by a Gaussian approximation. However, we show that fits of not lower quality are provided by certain non-Gaussian approximation. We have also tested larger lattice sizes, up to L=512. The Fourier-transformed transverse and longitudinal two-point correlation functions have Goldstone mode singularities in the thermodynamic limit at k --> 0 and h=+0, i.e., G_perp(k) = a k^{-lambda_perp} and G_parallel(k) = b k^{-lambda_parallel}, respectively. Here a and b are the amplitudes, k is the magnitude of the wave vector. The exponents lambda_perp, lambda_parallel and the ratio b M^2/a^2, where M is the spontaneous magnetization, are universal according to the GFD (grou** of Feynman diagrams) approach. Here we find that the universality follows also from the standard (Gaussian) theory, yielding b M^2/a^2 = (n-1)/16. Our MC estimates of this ratio are 0.06 +/- 0.01 for n=2, 0.17 +/- 0.01 for n=4 and 0.498 +/- 0.010 for n=10. According to these and our earlier MC results, the asymptotic behavior and Goldstone mode singularities are not exactly described by the standard theory. This is expected from the GFD theory. We have found appropriate analytic approximations for G_perp(k) and G_parallel(k), well fitting the simulation data for small k. We have used them to test the Patashinski--Pokrovski relation and have found that it holds approximately. △ Less

Submitted 1 July, 2013; originally announced July 2013.

Comments: 19 pages, 9 figures, 5 tables

Radio seismology of the outer solar corona

Authors: T. V. Zaqarashvili, V. N. Melnik, A. I. Brazhenko, M. Panchenko, A. A. Konovalenko, A. V. Franzuzenko, V. V. Dorovskyy, H. O. Rucker

Abstract: Observed oscillations of coronal loops in EUV lines have been successfully used to estimate plasma parameters in the inner corona (< 0.2 R_0, where R_0 is the solar radius). However, coronal seismology in EUV lines fails for higher altitudes because of rapid decrease in line intensity. We aim to use radio observations to estimate the plasma parameters of the outer solar corona (> 0.2 R_0). We use… ▽ More Observed oscillations of coronal loops in EUV lines have been successfully used to estimate plasma parameters in the inner corona (< 0.2 R_0, where R_0 is the solar radius). However, coronal seismology in EUV lines fails for higher altitudes because of rapid decrease in line intensity. We aim to use radio observations to estimate the plasma parameters of the outer solar corona (> 0.2 R_0). We use the large Ukrainian radio telescope URAN-2 to observe type IV radio burst at the frequency range of 8-32 MHz during the time interval of 09:50-12:30 UT in April 14, 2011. The burst was connected to C2.3 flare, which occurred in AR 11190 during 09:38-09:49 UT. The dynamic spectrum of radio emission shows clear quasi-periodic variations in the emission intensity at almost all frequencies. Wavelet analysis at four different frequencies (29 MHz, 25 MHz, 22 MHz and 14 MHz) shows the quasi-periodic variation of emission intensity with periods of 34 min and 23 min. The periodic variations can be explained by the first and second harmonics of vertical kink oscillation of transequatorial coronal loops, which were excited by the same flare. The apex of transequatorial loops may reach up to 1.2 R_0 altitude. We derive and solve the dispersion relation of trapped MHD oscillations in a longitudinally inhomogeneous magnetic slab. The analysis shows that a thin (with width to length ratio of 0.1), dense (with the ratio of internal and external densities of > 20) magnetic slab with weak longitudinal inhomogeneity may trap the observed oscillations. Seismologically estimated Alfvén speed inside the loop at the height of 1 R_0 is 1000 km/s. Then the magnetic field strength at this height is estimated as 0.9 G. Extrapolation of magnetic field strength to the inner corona gives 10 G at the height of 0.1 R_0. △ Less

Submitted 10 May, 2013; originally announced May 2013.

Comments: 12 pages, 10 figures, Accepted in A&A

Goldstone mode singularities in O(n) models

Authors: J. Kaupuzs, R. V. N. Melnik, J. Rimsans

Abstract: Monte Carlo (MC) analysis of the Goldstone mode singularities for the transverse and the longitudinal correlation functions, behaving as G_{\perp}(k) \simeq ak^{-λ_{\perp}} and G_{\parallel}(k) \simeq bk^{-λ_{\parallel}} in the ordered phase at k -> 0, is performed in the three-dimensional O(n) models with n=2, 4, 10. Our aim is to test some challenging theoretical predictions, according to which… ▽ More Monte Carlo (MC) analysis of the Goldstone mode singularities for the transverse and the longitudinal correlation functions, behaving as G_{\perp}(k) \simeq ak^{-λ_{\perp}} and G_{\parallel}(k) \simeq bk^{-λ_{\parallel}} in the ordered phase at k -> 0, is performed in the three-dimensional O(n) models with n=2, 4, 10. Our aim is to test some challenging theoretical predictions, according to which the exponents λ_{\perp} and λ_{\parallel} are non-trivial (3/2<λ_{\perp}<2 and 0<λ_{\parallel}<1 in three dimensions) and the ratio bM^2/a^2 (where M is a spontaneous magnetization) is universal. The trivial standard-theoretical values are λ_{\perp}=2 and λ_{\parallel}=1. Our earlier MC analysis gives λ_{\perp}=1.955 \pm 0.020 and λ_{\parallel} about 0.9 for the O(4) model. A recent MC estimation of λ_{\parallel}, assuming corrections to scaling of the standard theory, yields λ_{\parallel} = 0.69 \pm 0.10 for the O(2) model. Currently, we have performed a similar MC estimation for the O(10) model, yielding λ_{\perp} = 1.9723(90). We have observed that the plot of the effective transverse exponent for the O(4) model is systematically shifted down with respect to the same plot for the O(10) model by Δλ_{\perp} = 0.0121(52). It is consistent with the idea that 2-λ_{\perp} decreases for large $n$ and tends to zero at n -> \infty. We have also verified and confirmed the expected universality of bM^2/a^2 for the O(4) model, where simulations at two different temperatures (couplings) have been performed. △ Less

Submitted 26 December, 2012; originally announced December 2012.

Comments: 8 pages, 5 figures

Journal ref: Condens. Matter Phys., 2012, vol. 15, No. 4, 43005:1-8

The influence of anisotropic gate potentials on the phonon induced spin-flip rate in GaAs quantum dots

Authors: Sanjay Prabhakar, Roderick V. N. Melnik, Luis L. Bonilla

Abstract: We study the anisotropic orbital effect in the electric field tunability of the phonon induced spin-flip rate in quantum dots (QDs). Our study shows that anisotropic gate potential enhances the spin-flip rate and reduces the level crossing point to a lower quantum dot radius due to the suppression of the Land$\acute{e}$ g-factor towards bulk crystal. In the range of $10^4-10^6$ V/cm, the electric… ▽ More We study the anisotropic orbital effect in the electric field tunability of the phonon induced spin-flip rate in quantum dots (QDs). Our study shows that anisotropic gate potential enhances the spin-flip rate and reduces the level crossing point to a lower quantum dot radius due to the suppression of the Land$\acute{e}$ g-factor towards bulk crystal. In the range of $10^4-10^6$ V/cm, the electric field tunability of the phonon induced spin-flip rate can be manipulated through strong Dresselhaus spin-orbit coupling. These results might assist the development of a spin based solid state quantum computer by manipulating phonon induced spin-flip rate through spin-orbit coupling with the application of anisotropic gate potential in a regime where the g-factor changes its sign. △ Less

Submitted 14 January, 2012; v1 submitted 2 November, 2011; originally announced November 2011.

Comments: 4 pages, 3 figures

Journal ref: Applied Physics Letters 100, 023108 (2012)

Excitation of plasmons in two-dimensional electron gas with defects by microwaves: Wake-field method

Authors: Eduard Takhtamirov, Roderick V. N. Melnik

Abstract: We develop an analytical method to find plasmons generated by microwaves in a two-dimensional electron gas with defects. The excitations are expressed in terms of the wake field of a charged particle moving in plasma. The result explicitly addresses the efficiency of the photon-to-plasmon conversion and the type of excitation. While strong absorption of the radiation by the excitations is reached… ▽ More We develop an analytical method to find plasmons generated by microwaves in a two-dimensional electron gas with defects. The excitations are expressed in terms of the wake field of a charged particle moving in plasma. The result explicitly addresses the efficiency of the photon-to-plasmon conversion and the type of excitation. While strong absorption of the radiation by the excitations is reached at larger plasmon wave numbers, intense persistent plasma waves are created at optimal ones. The latter wave numbers depend on the spectrum of plasmons and the distance that the waves are required to travel without being substantially attenuated. Their type, which can be traveling or standing, is governed by the geometry of the defects and the polarization of the radiation. We identify such types of traveling plasmons as circular plasmons, excited at dot defects, and traverse plasmons, excited at straight wire defects and traveling away from (toward) the wires if their group velocity is positive (negative). Nonlinear excitations are also accounted for. In particular, we analyze the zeroth harmonic, linear in the microwave intensity, which has the character of a frozen charge density wave. The interference of elementary wakes from defects arranged in truncated periodic sets can produce amplified plasmons, which are easily portrayed. △ Less

Submitted 18 July, 2011; originally announced July 2011.

Journal ref: Phys. Rev. B 84, 045313 (2011)

Studies of critical phenomena and phase transitions in large lattices with Monte-Carlo based non-perturbative approaches

Authors: J. Kaupuzs, J. Rimshans, R. V. N. Melnik

Abstract: Critical phenomena and Goldstone mode effects in spin models with O(n) rotational symmetry are considered. Starting with the Goldstone mode singularities in the XY and O(4) models, we briefly review different theoretical concepts as well as state-of-the art Monte Carlo simulation results. They support recent results of the GFD (grou** of Feynman diagrams) theory, stating that these singularities… ▽ More Critical phenomena and Goldstone mode effects in spin models with O(n) rotational symmetry are considered. Starting with the Goldstone mode singularities in the XY and O(4) models, we briefly review different theoretical concepts as well as state-of-the art Monte Carlo simulation results. They support recent results of the GFD (grou** of Feynman diagrams) theory, stating that these singularities are described by certain nontrivial exponents, which differ from those predicted earlier by perturbative treatments. Furthermore, we present the recent Monte Carlo simulation results of the three-dimensional Ising model for very large lattices with linear sizes up to L=1536. These results are obtained, using a parallel OpenMP implementation of the Wolff single cluster algorithm. The finite-size scaling analysis of the critical exponent eta, assuming the usually accepted correction-to-scaling exponent omega=0.8, shows that eta is likely to be somewhat larger than the value 0.0335 +/- 0.0025 of the perturbative renormalization group (RG) theory. Moreover, we have found that the actual data can be well described by different critical exponents: eta=omega=1/8 and nu=2/3, found within the GFD theory. △ Less

Submitted 2 March, 2011; originally announced March 2011.

Comments: 15 pages, 6 figures

Spin-orbit interaction in three-dimensionally bounded semiconductor nanostructures

Authors: Eduard Takhtamirov, Roderick V. N. Melnik

Abstract: The structural inversion asymmetry-induced spin-orbit interaction of conduction band electrons in zinc-blende and wurtzite semiconductor structures is analysed allowing for a three-dimensional (3D) character of the external electric field and variation of the chemical composition. The interaction, taking into account all remote bands perturbatively, is presented with two contributions: a heteroint… ▽ More The structural inversion asymmetry-induced spin-orbit interaction of conduction band electrons in zinc-blende and wurtzite semiconductor structures is analysed allowing for a three-dimensional (3D) character of the external electric field and variation of the chemical composition. The interaction, taking into account all remote bands perturbatively, is presented with two contributions: a heterointerface term and a term caused by the external electric field. They have generally comparable strength and can be written in a unified manner only for 2D systems, where they can partially cancel each other. For quantum wires and dots composed of wurtzite semiconductors new terms appear, absent in zinc-blende structures, which acquire the standard Rashba form in 2D systems. △ Less

Submitted 27 December, 2010; originally announced December 2010.

Comments: 18 pages, 1 figure

Journal ref: New J. Phys. 12, 123006 (2010)

Effect of interdiffusion and quantum confinement on Raman spectra of the Ge/Si(100) heterostructures with quantum dots

Authors: I. V. Kucherenko, V. S. Vinogradov, N. N. Melnik, L. V. Arapkina, V. A. Chapnin, K. V. Chizh, V. A. Yuryev

Abstract: We used Raman scattering for study the phonon modes of self-organized Ge/Si quantum dots, grown by a molecular-beam epitaxy method. It is revealed, that Ge-Ge and Si-Ge vibrational modes considerably intensify at excitation of exciton between the {Lambda}3 valence and {Lanbda}1 conduction bands (transitions E1 and E1+{Delta}1), that allows to observe Raman scattering spectrum from extremely smal… ▽ More We used Raman scattering for study the phonon modes of self-organized Ge/Si quantum dots, grown by a molecular-beam epitaxy method. It is revealed, that Ge-Ge and Si-Ge vibrational modes considerably intensify at excitation of exciton between the {Lambda}3 valence and {Lanbda}1 conduction bands (transitions E1 and E1+{Delta}1), that allows to observe Raman scattering spectrum from extremely small volumes of Ge, even from one layer of quantum dots with the layer thickness of ~ 10 A. It is shown that Si diffuses into the Ge quantum dots from the Si spacer layers forming Ge_xSi_{1-x} solid solution, and Si concentration was estimated. It is revealed, that the frequency of Ge-Ge mode decreases in 10 1/cm at decreasing of the Ge layer thickness from 10 up to 6 A as a result of phonon size confinement effect. △ Less

Submitted 10 August, 2009; originally announced August 2009.

Comments: Reported at the 16th Int. Symp. "Nanostructures: Physics and Technology", Vladivostok, Russia, July 14-18, 2008

Journal ref: Proc. 16th Int. Symp. "Nanostructures: Physics and Technology", Vladivostok, Russia, July 14-18, 2008

Decameter Type III-Like Bursts

Authors: V. N. Melnik, A. A. Konovalenko, B. P. Rutkevych, H. O. Rucker, V. V. Dorovskyy, E. P. Abranin, A. Lecacheux, A. I. Brazhenko, A. A. Stanislavskyy

Abstract: Starting from 1960s Type III-like bursts (Type III bursts with high drift rates) in a wide frequency range from 300 to 950MHz have been observed. These new bursts observed at certain frequency being compared to the usual Type III bursts at the same frequency show similar behaviour but feature frequency drift 2-6 times higher than the normal bursts. In this paper we report the first observations… ▽ More Starting from 1960s Type III-like bursts (Type III bursts with high drift rates) in a wide frequency range from 300 to 950MHz have been observed. These new bursts observed at certain frequency being compared to the usual Type III bursts at the same frequency show similar behaviour but feature frequency drift 2-6 times higher than the normal bursts. In this paper we report the first observations of Type III-like bursts in decameter range, carried out during summer campaigns 2002 - 2004 at UTR-2 radio telescope. The circular polarization of the bursts was measured by the radio telescope URAN-2 in 2004. The observed bursts are analyzed and compared with usual Type III bursts in the decameter range. From the analysis of over 1100 Type III-like bursts, their main parameters have been found. Characteristic feature of the observed bursts is similar to Type III-like bursts at other frequencies, i.e. measured drift rates (5-10 MHz/s) of this bursts are few times larger than that for usual Type III bursts, and their durations (1-2 s) are few times smaller than that for usual Type III bursts in this frequency band. △ Less

Submitted 10 December, 2007; originally announced December 2007.

Comments: Published in Proceedings of the 14th Young Scientists Conference on Astronomy and Space Physics, Kyiv, Ukraine, April 23-28, 2007

Journal ref: YSC'14 Proceedings of Contributed Papers (eds. G. Ivashchenko, A. Golovin), Kyiv, Kyivskyi Universytet, pp. 68-72, 2007

Modeling the Field Emission Current Fluctuation in Carbon Nanotube Thin Films

Authors: N. Sinha, D. Roy Mahapatra, J. T. W. Yeow, R. V. N. Melnik

Abstract: Owing to their distinct properties, carbon nanotubes (CNTs) have emerged as promising candidate for field emission devices. It has been found experimentally that the results related to the field emission performance show variability. The design of an efficient field emitting device requires the analysis of the variabilities with a systematic and multiphysics based modeling approach. In this pape… ▽ More Owing to their distinct properties, carbon nanotubes (CNTs) have emerged as promising candidate for field emission devices. It has been found experimentally that the results related to the field emission performance show variability. The design of an efficient field emitting device requires the analysis of the variabilities with a systematic and multiphysics based modeling approach. In this paper, we develop a model of randomly oriented CNTs in a thin film by coupling the field emission phenomena, the electron-phonon transport and the mechanics of single isolated CNT. A computational scheme is developed by which the states of CNTs are updated in time incremental manner. The device current is calculated by using Fowler-Nordheim equation for field emission to study the performance at the device scale. △ Less

Submitted 12 April, 2007; originally announced April 2007.

Comments: 4 pages, 5 figures

Carbon Nanotube Thin Film Field Emitting Diode: Understanding the System Response Based on Multiphysics Modeling

Authors: N. Sinha, D. Roy Mahapatra, J. T. W. Yeow, R. V. N. Melnik, D. A. Jaffray

Abstract: In this paper, we model the evolution and self-assembly of randomly oriented carbon nanotubes (CNTs), grown on a metallic substrate in the form of a thin film for field emission under diode configuration. Despite high output, the current in such a thin film device often decays drastically. The present paper is focused on understanding this problem. A systematic, multiphysics based modelling appr… ▽ More In this paper, we model the evolution and self-assembly of randomly oriented carbon nanotubes (CNTs), grown on a metallic substrate in the form of a thin film for field emission under diode configuration. Despite high output, the current in such a thin film device often decays drastically. The present paper is focused on understanding this problem. A systematic, multiphysics based modelling approach is proposed. First, a nucleation coupled model for degradation of the CNT thin film is derived, where the CNTs are assumed to decay by fragmentation and formation of clusters. The random orientation of the CNTs and the electromechanical interaction are then modeled to explain the self-assembly. The degraded state of the CNTs and the electromechanical force are employed to update the orientation of the CNTs. Field emission current at the device scale is finally obtained by using the Fowler-Nordheim equation and integration over the computational cell surfaces on the anode side. The simulated results are in close agreement with the experimental results. Based on the developed model, numerical simulations aimed at understanding the effects of various geometric parameters and their statistical features on the device current history are reported. △ Less

Submitted 12 April, 2007; originally announced April 2007.

Comments: 40 pages, 13 figures; keywords: field emission, carbon nanotubes, degradation, electrodynamics, self-assembly

Journal ref: Carbon nanotube thin film fSinha, N., Mahapatra, D.R., Yeow, J.T.W., Melnik, R.V.N. and Jaffray, D.A., Journal of Computational and Theoretical Nanoscience, 4, 1--15, 2007

Effect of Internal Viscosity on Brownian Dynamics of DNA Molecules in Shear Flow

Authors: Jack Yang, Roderick V. N. Melnik

Abstract: The results of Brownian dynamics simulations of a single DNA molecule in shear flow are presented taking into account the effect of internal viscosity. The dissipative mechanism of internal viscosity is proved necessary in the research of DNA dynamics. A stochastic model is derived on the basis of the balance equation for forces acting on the chain. The Euler method is applied to the solution of… ▽ More The results of Brownian dynamics simulations of a single DNA molecule in shear flow are presented taking into account the effect of internal viscosity. The dissipative mechanism of internal viscosity is proved necessary in the research of DNA dynamics. A stochastic model is derived on the basis of the balance equation for forces acting on the chain. The Euler method is applied to the solution of the model. The extensions of DNA molecules for different Weissenberg numbers are analyzed. Comparison with the experimental results available in the literature is carried out to estimate the contribution of the effect of internal viscosity. △ Less

Submitted 1 March, 2007; originally announced March 2007.

Comments: Keywords: effect of internal viscosity, dumbbell model, Brownian dynamics, DNA molecules in shear flow

Journal ref: Effect of internal viscosity on Brownian dynamics of DNA molecules in shear flow, Yang, X.D. and Melnik, R.V.N., Computational Biology and Chemistry, 31 (2), 110-114, 2007

Numerical Model For Vibration Dam** Resulting From the First Order Phase Transformations

Authors: Linxiang X. Wang, Roderick V. N. Melnik

Abstract: A numerical model is constructed for modelling macroscale dam** effects induced by the first order martensite phase transformations in a shape memory alloy rod. The model is constructed on the basis of the modified Landau-Ginzburg theory that couples nonlinear mechanical and thermal fields. The free energy function for the model is constructed as a double well function at low temperature, such… ▽ More A numerical model is constructed for modelling macroscale dam** effects induced by the first order martensite phase transformations in a shape memory alloy rod. The model is constructed on the basis of the modified Landau-Ginzburg theory that couples nonlinear mechanical and thermal fields. The free energy function for the model is constructed as a double well function at low temperature, such that the external energy can be absorbed during the phase transformation and converted into thermal form. The Chebyshev spectral methods are employed together with backward differentiation for the numerical analysis of the problem. Computational experiments performed for different vibration energies demonstrate the importance of taking into account dam** effects induced by phase transformations. △ Less

Submitted 28 February, 2007; originally announced February 2007.

Comments: Keywords: martensite transformation, thermo-mechanical coupling, vibration dam**, Ginzburg-Landau theory

Simulation of Phase Combinations in Shape Memory Alloys Patches by Hybrid Optimization Methods

Authors: Linxiang X. Wang, Roderick V. N. Melnik

Abstract: In this paper, phase combinations among martensitic variants in shape memory alloys patches and bars are simulated by a hybrid optimization methodology. The mathematical model is based on the Landau theory of phase transformations. Each stable phase is associated with a local minimum of the free energy function, and the phase combinations are simulated by minimizing the bulk energy. At low tempe… ▽ More In this paper, phase combinations among martensitic variants in shape memory alloys patches and bars are simulated by a hybrid optimization methodology. The mathematical model is based on the Landau theory of phase transformations. Each stable phase is associated with a local minimum of the free energy function, and the phase combinations are simulated by minimizing the bulk energy. At low temperature, the free energy function has double potential wells leading to non-convexity of the optimization problem. The methodology proposed in the present paper is based on an initial estimate of the global solution by a genetic algorithm, followed by a refined quasi-Newton procedure to locally refine the optimum. By combining the local and global search algorithms, the phase combinations are successfully simulated. Numerical experiments are presented for the phase combinations in a SMA patch under several typical mechanical loadings. △ Less

Submitted 28 February, 2007; originally announced February 2007.

Comments: Keywords: phase combinations, shape memory alloys, variational problem, genetic algorithm, quasi-Newton methods

Finite Volume Analysis of Nonlinear Thermo-mechanical Dynamics of Shape Memory Alloys

Authors: Linxiang X. Wang, Roderick V. N. Melnik

Abstract: In this paper, the finite volume method is developed to analyze coupled dynamic problems of nonlinear thermoelasticity. The major focus is given to the description of martensitic phase transformations essential in the modelling of shape memory alloys. Computational experiments are carried out to study the thermo-mechanical wave interactions in a shape memory alloy rod, and a patch. Both mechanic… ▽ More In this paper, the finite volume method is developed to analyze coupled dynamic problems of nonlinear thermoelasticity. The major focus is given to the description of martensitic phase transformations essential in the modelling of shape memory alloys. Computational experiments are carried out to study the thermo-mechanical wave interactions in a shape memory alloy rod, and a patch. Both mechanically and thermally induced phase transformations, as well as hysteresis effects, in a one-dimensional structure are successfully simulated with the developed methodology. In the two-dimensional case, the main focus is given to square-to-rectangular transformations and examples of martensitic combinations under different mechanical loadings are provided. △ Less

Submitted 28 February, 2007; originally announced February 2007.

Comments: Keywords: shape memory alloys, phase transformations, nonlinear thermo-elasticity, finite volume method

Solving Stochastic Differential Equations with Jump-Diffusion Efficiently: Applications to FPT Problems in Credit Risk

Authors: Di Zhang, Roderick V. N. Melnik

Abstract: The first passage time (FPT) problem is ubiquitous in many applications. In finance, we often have to deal with stochastic processes with jump-diffusion, so that the FTP problem is reducible to a stochastic differential equation with jump-diffusion. While the application of the conventional Monte-Carlo procedure is possible for the solution of the resulting model, it becomes computationally inef… ▽ More The first passage time (FPT) problem is ubiquitous in many applications. In finance, we often have to deal with stochastic processes with jump-diffusion, so that the FTP problem is reducible to a stochastic differential equation with jump-diffusion. While the application of the conventional Monte-Carlo procedure is possible for the solution of the resulting model, it becomes computationally inefficient which severely restricts its applicability in many practically interesting cases. In this contribution, we focus on the development of efficient Monte-Carlo-based computational procedures for solving the FPT problem under the multivariate (and correlated) jump-diffusion processes. We also discuss the implementation of the developed Monte-Carlo-based technique for multivariate jump-diffusion processes driving by several compound Poisson shocks. Finally, we demonstrate the application of the developed methodologies for analyzing the default rates and default correlations of differently rated firms via historical data. △ Less

Submitted 28 February, 2007; originally announced February 2007.

Comments: Keywords: Default Correlation, First Passage Time, Multivariate Jump-Diffusion Processes, Monte-Carlo Simulation, Multivariate Uniform Sampling Method

Efficient estimation of default correlation for multivariate jump-diffusion processes

Authors: Di Zhang, Roderick V. N. Melnik

Abstract: Evaluation of default correlation is an important task in credit risk analysis. In many practical situations, it concerns the joint defaults of several correlated firms, the task that is reducible to a first passage time (FPT) problem. This task represents a great challenge for jump-diffusion processes (JDP), where except for very basic cases, there are no analytical solutions for such problems.… ▽ More Evaluation of default correlation is an important task in credit risk analysis. In many practical situations, it concerns the joint defaults of several correlated firms, the task that is reducible to a first passage time (FPT) problem. This task represents a great challenge for jump-diffusion processes (JDP), where except for very basic cases, there are no analytical solutions for such problems. In this contribution, we generalize our previous fast Monte-Carlo method (non-correlated jump-diffusion cases) for multivariate (and correlated) jump-diffusion processes. This generalization allows us, among other things, to evaluate the default events of several correlated assets based on a set of empirical data. The developed technique is an efficient tool for a number of other applications, including credit risk and option pricing. △ Less

Submitted 28 February, 2007; originally announced February 2007.

Comments: Keywords: Default correlation, First passage time problem, Monte Carlo simulation

Monte-Carlo Simulations of the First Passage Time for Multivariate Jump-Diffusion Processes in Financial Applications

Authors: Di Zhang, Roderick V. N. Melnik

Abstract: Many problems in finance require the information on the first passage time (FPT) of a stochastic process. Mathematically, such problems are often reduced to the evaluation of the probability density of the time for such a process to cross a certain level, a boundary, or to enter a certain region. While in other areas of applications the FPT problem can often be solved analytically, in finance we… ▽ More Many problems in finance require the information on the first passage time (FPT) of a stochastic process. Mathematically, such problems are often reduced to the evaluation of the probability density of the time for such a process to cross a certain level, a boundary, or to enter a certain region. While in other areas of applications the FPT problem can often be solved analytically, in finance we usually have to resort to the application of numerical procedures, in particular when we deal with jump-diffusion stochastic processes (JDP). In this paper, we propose a Monte-Carlo-based methodology for the solution of the first passage time problem in the context of multivariate (and correlated) jump-diffusion processes. The developed technique provide an efficient tool for a number of applications, including credit risk and option pricing. We demonstrate its applicability to the analysis of the default rates and default correlations of several different, but correlated firms via a set of empirical data. △ Less

Submitted 28 February, 2007; originally announced February 2007.

Comments: Keywords: First passage time; Monte Carlo simulation; Multivariate jump-diffusion processes; Credit risk

First Passage Time for Multivariate Jump-diffusion Stochastic Models With Applications in Finance

Authors: Di Zhang, Roderick V. N. Melnik

Abstract: The ``first passage-time'' (FPT) problem is an important problem with a wide range of applications in mathematics, physics, biology and finance. Mathematically, such a problem can be reduced to estimating the probability of a (stochastic) process first to reach a critical level or threshold. While in other areas of applications the FPT problem can often be solved analytically, in finance we usua… ▽ More The ``first passage-time'' (FPT) problem is an important problem with a wide range of applications in mathematics, physics, biology and finance. Mathematically, such a problem can be reduced to estimating the probability of a (stochastic) process first to reach a critical level or threshold. While in other areas of applications the FPT problem can often be solved analytically, in finance we usually have to resort to the application of numerical procedures, in particular when we deal with jump-diffusion stochastic processes (JDP). In this paper, we develop a Monte-Carlo-based methodology for the solution of the FPT problem in the context of a multivariate jump-diffusion stochastic process. The developed methodology is tested by using different parameters, the simulation results indicate that the developed methodology is much more efficient than the conventional Monte Carlo method. It is an efficient tool for further practical applications, such as the analysis of default correlation and predicting barrier options in finance. △ Less

Submitted 28 February, 2007; originally announced February 2007.

Comments: Keywords: Monte-Carlo simulations, first passage time, multivariate jump-diffusion process; 10 pages, 3 figures

Coupling Control and Human-Centered Automation in Mathematical Models of Complex Systems

Authors: Roderick V. N. Melnik

Abstract: In this paper we analyze mathematically how human factors can be effectively incorporated into the analysis and control of complex systems. As an example, we focus our discussion around one of the key problems in the Intelligent Transportation Systems (ITS) theory and practice, the problem of speed control, considered here as a decision making process with limited information available. The prob… ▽ More In this paper we analyze mathematically how human factors can be effectively incorporated into the analysis and control of complex systems. As an example, we focus our discussion around one of the key problems in the Intelligent Transportation Systems (ITS) theory and practice, the problem of speed control, considered here as a decision making process with limited information available. The problem is cast mathematically in the general framework of control problems and is treated in the context of dynamically changing environments where control is coupled to human-centered automation. Since in this case control might not be limited to a small number of control settings, as it is often assumed in the control literature, serious difficulties arise in the solution of this problem. We demonstrate that the problem can be reduced to a set of Hamilton-Jacobi-Bellman equations where human factors are incorporated via estimations of the system Hamiltonian. In the ITS context, these estimations can be obtained with the use of on-board equipment like sensors/receivers/actuators, in-vehicle communication devices, etc. The proposed methodology provides a way to integrate human factor into the solving process of the models for other complex dynamic systems. △ Less

Submitted 25 February, 2007; originally announced February 2007.

Comments: 19 pages

Linking Microscopic and Macroscopic Models for Evolution: Markov Chain Network Training and Conservation Law Approximations

Authors: Roderick V. N. Melnik

Abstract: In this paper, a general framework for the analysis of a connection between the training of artificial neural networks via the dynamics of Markov chains and the approximation of conservation law equations is proposed. This framework allows us to demonstrate an intrinsic link between microscopic and macroscopic models for evolution via the concept of perturbed generalized dynamic systems. The mai… ▽ More In this paper, a general framework for the analysis of a connection between the training of artificial neural networks via the dynamics of Markov chains and the approximation of conservation law equations is proposed. This framework allows us to demonstrate an intrinsic link between microscopic and macroscopic models for evolution via the concept of perturbed generalized dynamic systems. The main result is exemplified with a number of illustrative examples where efficient numerical approximations follow directly from network-based computational models, viewed here as Markov chain approximations. Finally, stability and consistency conditions of such computational models are discussed. △ Less

Submitted 25 February, 2007; originally announced February 2007.

Comments: 21 pages, 5 figures

Journal ref: Markov Chain network training and conservation law approximations: Linking microscopic and macroscopic models for evolution, Melnik, R.V.N., Applied Mathematics and Computation, 199 (1), 315--333, 2008

Thermo-Mechanical Wave Propagation In Shape Memory Alloy Rod With Phase Transformations

Authors: Linxiang X. Wang, Roderick V. N. Melnik

Abstract: Many new applications of ferroelastic materials require a better understanding of their dynamics that often involve phase transformations. In such cases, an important prerequisite is the understanding of wave propagation caused by pulse-like loadings. In the present study, a mathematical model is developed to analyze the wave propagation process in shape memory alloy rods. The first order marten… ▽ More Many new applications of ferroelastic materials require a better understanding of their dynamics that often involve phase transformations. In such cases, an important prerequisite is the understanding of wave propagation caused by pulse-like loadings. In the present study, a mathematical model is developed to analyze the wave propagation process in shape memory alloy rods. The first order martensite transformations and associated thermo-mechanical coupling effects are accounted for by employing the modified Ginzburg-Landau-Devonshire theory. The Landau-type free energy function is employed to characterize different phases, while a Ginzburg term is introduced to account for energy contributions from phase boundaries. The effect of internal friction is represented by a Rayleigh dissipation term. The resulted nonlinear system of PDEs is reduced to a differential-algebraic system, and Chebyshev's collocation method is employed together with the backward differentiation method. A series of numerical experiments are performed. Wave propagations caused by impact loadings are analyzed for different initial temperatures. It is demonstrated that coupled waves will be induced in the material. Such waves will be dissipated and dispersed during the propagation process, and phase transformations in the material will complicate their propagation patterns. Finally, the influence of internal friction and capillary effects on the process of wave propagation is analyzed numerically. △ Less

Submitted 28 February, 2007; originally announced February 2007.

Comments: Keywords: nonlinear waves, thermo-mechanical coupling, martensite transformations, Ginzburg-Landau theory, Chebyshev collocation method

Model Reduction Applied to Square to Rectangular Martensitic Transformations Using Proper Orthogonal Decomposition

Authors: Linxiang X. Wang, Roderick V. N. Melnik

Abstract: Model reduction using the proper orthogonal decomposition (POD) method is applied to the dynamics of ferroelastic patches to study the first order square to rectangular phase transformations. Governing equations for the system dynamics are constructed by using the Landau-Ginzburg theory and are solved numerically. By using the POD method, a set of empirical orthogonal basis functions is first co… ▽ More Model reduction using the proper orthogonal decomposition (POD) method is applied to the dynamics of ferroelastic patches to study the first order square to rectangular phase transformations. Governing equations for the system dynamics are constructed by using the Landau-Ginzburg theory and are solved numerically. By using the POD method, a set of empirical orthogonal basis functions is first constructed, then the system is projected onto the subspace spanned by a small set of basis functions determined by the associated singular values. The performance of the low dimensional model is verified by simulating nonlinear thermo-mechanical waves and square to rectangular transformations in a ferroelastic patch. Comparison between numerical results obtained from the original PDE model and the low dimensional one is carried out. △ Less

Submitted 28 February, 2007; originally announced February 2007.

Comments: Keywords: Phase transformation, ferroelastic patch, model reduction, proper orthogonal decomposition, Galerkin projection

Coupled Effects in Quantum Dot Nanostructures with Nonlinear Strain and Bridging Modelling Scales

Authors: Roderick V. N. Melnik, Roy Mahapatra

Abstract: We demonstrate that the conventional application of linear models to the analysis of optoelectromechanical properties of nanostructures in bandstructure engineering could be inadequate. The focus of the present paper is on a model based on the coupled Schrodinger-Poisson system where we account consistently for the piezoelectric effect and analyze the influence of different nonlinear terms in st… ▽ More We demonstrate that the conventional application of linear models to the analysis of optoelectromechanical properties of nanostructures in bandstructure engineering could be inadequate. The focus of the present paper is on a model based on the coupled Schrodinger-Poisson system where we account consistently for the piezoelectric effect and analyze the influence of different nonlinear terms in strain components. The examples given in this paper show that the piezoelectric effect contributions are essential and have to be accounted for with fully coupled models. While in structural applications of piezoelectric materials at larger scales, the minimization of the full electromechanical energy is now a routine in many engineering applications, in bandstructure engineering conventional approaches are still based on linear models with minimization of uncoupled, purely elastic energy functionals with respect to displacements. Generalizations of the existing models for bandstructure calculations are presented in this paper in the context of coupled effects. △ Less

Submitted 25 February, 2007; originally announced February 2007.

Comments: 24 pages, 1 table, 15 figures

Journal ref: Coupled effects in quantum dot nanostructures with nonlinear strain and bridging modelling scales, Melnik, R.V.N. and Mahapatra, D.R., Computers & Structures, 85 (11-14), 698-711, 2007

Approximate Models of Dynamic Thermoviscoelasticity Describing Shape-Memory-Alloy Phase Transitions

Authors: R. V. N. Melnik, A. J. Roberts

Abstract: We consider problems of dynamic viscoelasticity taking into account the coupling of elastic and thermal fields. Efficient approximate models are developed and computational results on thermomechanical behaviour of shape-memory-alloy structures are presented. We consider problems of dynamic viscoelasticity taking into account the coupling of elastic and thermal fields. Efficient approximate models are developed and computational results on thermomechanical behaviour of shape-memory-alloy structures are presented. △ Less

Submitted 20 November, 1998; originally announced November 1998.

Comments: 15 pages, 2 figures

Report number: Dept. of Maths and Comp., USQ, SC-MC-9829 MSC Class: 65C20; 73F15