-
Factors Influencing Autonomously Generated 3D Geophysical Spatial Models
Authors:
M. Balamurali,
A. Melkumyan,
J. Zigman
Abstract:
Understanding the contribution of geophysical variables is vital for identifying the ore indicator regions. Both magnetometry and gamma-rays are used to identify the geophysical signatures of the rocks. Density is another key variable for tonnage estimation in mining and needs to be re-estimated in areas of change when a boundary update has been conducted. Modelling these geophysical variables in…
▽ More
Understanding the contribution of geophysical variables is vital for identifying the ore indicator regions. Both magnetometry and gamma-rays are used to identify the geophysical signatures of the rocks. Density is another key variable for tonnage estimation in mining and needs to be re-estimated in areas of change when a boundary update has been conducted. Modelling these geophysical variables in 3D will enable investigate the properties of the rocks and improve our understanding of the ore. Gaussian Process (GP) was previously used to generate 3D spatial models for grade estimation using geochemical assays. This study investigates the influence of the following two factors on the GP-based autonomously generated 3D geophysical models: the resolution of the input data and the number of nearest samples used in the training process. A case study was conducted on a typical Hammersley Ranges iron ore deposit using geophysical logs, including density, collected from the exploration holes.
△ Less
Submitted 22 February, 2023;
originally announced February 2023.
-
Unsupervised ore/waste classification on open-cut mine faces using close-range hyperspectral data
Authors:
Lloyd Windrim,
Arman Melkumyan,
Richard J. Murphy,
Anna Chlingaryan,
Raymond Leung
Abstract:
The remote map** of minerals and discrimination of ore and waste on surfaces are important tasks for geological applications such as those in mining. Such tasks have become possible using ground-based, close-range hyperspectral sensors which can remotely measure the reflectance properties of the environment with high spatial and spectral resolution. However, autonomous map** of mineral spectra…
▽ More
The remote map** of minerals and discrimination of ore and waste on surfaces are important tasks for geological applications such as those in mining. Such tasks have become possible using ground-based, close-range hyperspectral sensors which can remotely measure the reflectance properties of the environment with high spatial and spectral resolution. However, autonomous map** of mineral spectra measured on an open-cut mine face remains a challenging problem due to the subtleness of differences in spectral absorption features between mineral and rock classes as well as variability in the illumination of the scene. An additional layer of difficulty arises when there is no annotated data available to train a supervised learning algorithm. A pipeline for unsupervised map** of spectra on a mine face is proposed which draws from several recent advances in the hyperspectral machine learning literature. The proposed pipeline brings together unsupervised and self-supervised algorithms in a unified system to map minerals on a mine face without the need for human-annotated training data. The pipeline is evaluated with a hyperspectral image dataset of an open-cut mine face comprising mineral ore martite and non-mineralised shale. The combined system is shown to produce a superior map to its constituent algorithms, and the consistency of its map** capability is demonstrated using data acquired at two different times of day.
△ Less
Submitted 9 February, 2023;
originally announced February 2023.
-
Automation and AI Technology in Surface Mining With a Brief Introduction to Open-Pit Operations in the Pilbara
Authors:
Raymond Leung,
Andrew J Hill,
Arman Melkumyan
Abstract:
This survey article provides a synopsis on some of the engineering problems, technological innovations, robotic development and automation efforts encountered in the mining industry -- particularly in the Pilbara iron-ore region of Western Australia. The goal is to paint the technology landscape and highlight issues relevant to an engineering audience to raise awareness of AI and automation trends…
▽ More
This survey article provides a synopsis on some of the engineering problems, technological innovations, robotic development and automation efforts encountered in the mining industry -- particularly in the Pilbara iron-ore region of Western Australia. The goal is to paint the technology landscape and highlight issues relevant to an engineering audience to raise awareness of AI and automation trends in mining. It assumes the reader has no prior knowledge of mining and builds context gradually through focused discussion and short summaries of common open-pit mining operations. The principal activities that take place may be categorized in terms of resource development, mine-, rail- and port operations. From mineral exploration to ore shipment, there are roughly nine steps in between. These include: geological assessment, mine planning and development, production drilling and assaying, blasting and excavation, transportation of ore and waste, crush and screen, stockpile and load-out, rail network distribution, and ore-car dum**. The objective is to describe these processes and provide insights on some of the challenges/opportunities from the perspective of a decade-long industry-university R&D partnership.
△ Less
Submitted 15 October, 2023; v1 submitted 23 January, 2023;
originally announced January 2023.
-
A Machine Learning Approach for Material Type Logging and Chemical Assaying from Autonomous Measure-While-Drilling (MWD) Data
Authors:
Rami N Khushaba,
Arman Melkumyan,
Andrew J Hill
Abstract:
Understanding the structure and mineralogical composition of a region is an essential step in mining, both during exploration (before mining) and in the mining process. During exploration, sparse but high-quality data are gathered to assess the overall orebody. During the mining process, boundary positions and material properties are refined as the mine progresses. This refinement is facilitated t…
▽ More
Understanding the structure and mineralogical composition of a region is an essential step in mining, both during exploration (before mining) and in the mining process. During exploration, sparse but high-quality data are gathered to assess the overall orebody. During the mining process, boundary positions and material properties are refined as the mine progresses. This refinement is facilitated through drilling, material logging, and chemical assaying. Material type logging suffers from a high degree of variability due to factors such as the diversity in mineralization and geology, the subjective nature of human measurement even by experts, and human error in manually recording results. While laboratory-based chemical assaying is much more precise, it is time-consuming and costly and does not always capture or correlate boundary positions between all material types. This leads to significant challenges and financial implications for the industry, as the accuracy of production blasthole logging and assaying processes is essential for resource evaluation, planning, and execution of mine plans. To overcome these challenges, this work reports on a pilot study to automate the process of material logging and chemical assaying. A machine learning approach has been trained on features extracted from measurement-while-drilling (MWD) data, logged from autonomous drilling systems (ADS). MWD data facilitate the construction of profiles of physical drilling parameters as a function of hole depth. A hypothesis is formed to link these drilling parameters to the underlying mineral composition. The results of the pilot study discussed in this paper demonstrate the feasibility of this process, with correlation coefficients of up to 0.92 for chemical assays and 93% accuracy for material detection, depending on the material or assay type and their generalization across the different spatial regions.
△ Less
Submitted 7 February, 2022;
originally announced February 2022.
-
Bayesian Surface War** Approach For Rectifying Geological Boundaries Using Displacement Likelihood And Evidence From Geochemical Assays
Authors:
Raymond Leung,
Alexander Lowe,
Anna Chlingaryan,
Arman Melkumyan,
John Zigman
Abstract:
This paper presents a Bayesian framework for manipulating mesh surfaces with the aim of improving the positional integrity of the geological boundaries that they seek to represent. The assumption is that these surfaces, created initially using sparse data, capture the global trend and provide a reasonable approximation of the stratigraphic, mineralisation and other types of boundaries for mining e…
▽ More
This paper presents a Bayesian framework for manipulating mesh surfaces with the aim of improving the positional integrity of the geological boundaries that they seek to represent. The assumption is that these surfaces, created initially using sparse data, capture the global trend and provide a reasonable approximation of the stratigraphic, mineralisation and other types of boundaries for mining exploration, but they are locally inaccurate at scales typically required for grade estimation. The proposed methodology makes local spatial corrections automatically to maximise the agreement between the modelled surfaces and observed samples. Where possible, vertices on a mesh surface are moved to provide a clear delineation, for instance, between ore and waste material across the boundary based on spatial and compositional analysis; using assay measurements collected from densely spaced, geo-registered blast holes. The maximum a posteriori (MAP) solution ultimately considers the chemistry observation likelihood in a given domain. Furthermore, it is guided by an apriori spatial structure which embeds geological domain knowledge and determines the likelihood of a displacement estimate. The results demonstrate that increasing surface fidelity can significantly improve grade estimation performance based on large-scale model validation.
△ Less
Submitted 30 March, 2021; v1 submitted 29 May, 2020;
originally announced May 2020.
-
Hyperspectral CNN Classification with Limited Training Samples
Authors:
Lloyd Windrim,
Rishi Ramakrishnan,
Arman Melkumyan,
Richard Murphy
Abstract:
Hyperspectral imaging sensors are becoming increasingly popular in robotics applications such as agriculture and mining, and allow per-pixel thematic classification of materials in a scene based on their unique spectral signatures. Recently, convolutional neural networks have shown remarkable performance for classification tasks, but require substantial amounts of labelled training data. This data…
▽ More
Hyperspectral imaging sensors are becoming increasingly popular in robotics applications such as agriculture and mining, and allow per-pixel thematic classification of materials in a scene based on their unique spectral signatures. Recently, convolutional neural networks have shown remarkable performance for classification tasks, but require substantial amounts of labelled training data. This data must sufficiently cover the variability expected to be encountered in the environment. For hyperspectral data, one of the main variations encountered outdoors is due to incident illumination, which can change in spectral shape and intensity depending on the scene geometry. For example, regions occluded from the sun have a lower intensity and their incident irradiance skewed towards shorter wavelengths.
In this work, a data augmentation strategy based on relighting is used during training of a hyperspectral convolutional neural network. It allows training to occur in the outdoor environment given only a small labelled region, which does not need to sufficiently represent the geometric variability of the entire scene. This is important for applications where obtaining large amounts of training data is labourious, hazardous or difficult, such as labelling pixels within shadows. Radiometric normalisation approaches for pre-processing the hyperspectral data are analysed and it is shown that methods based on the raw pixel data are sufficient to be used as input for the classifier. This removes the need for external hardware such as calibration boards, which can restrict the application of hyperspectral sensors in robotics applications. Experiments to evaluate the classification system are carried out on two datasets captured from a field-based platform.
△ Less
Submitted 28 November, 2016;
originally announced November 2016.
-
Information fusion in multi-task Gaussian processes
Authors:
Shrihari Vasudevan,
Arman Melkumyan,
Steven Scheding
Abstract:
This paper evaluates heterogeneous information fusion using multi-task Gaussian processes in the context of geological resource modeling. Specifically, it empirically demonstrates that information integration across heterogeneous information sources leads to superior estimates of all the quantities being modeled, compared to modeling them individually. Multi-task Gaussian processes provide a power…
▽ More
This paper evaluates heterogeneous information fusion using multi-task Gaussian processes in the context of geological resource modeling. Specifically, it empirically demonstrates that information integration across heterogeneous information sources leads to superior estimates of all the quantities being modeled, compared to modeling them individually. Multi-task Gaussian processes provide a powerful approach for simultaneous modeling of multiple quantities of interest while taking correlations between these quantities into consideration. Experiments are performed on large scale real sensor data.
△ Less
Submitted 4 September, 2013; v1 submitted 6 October, 2012;
originally announced October 2012.
-
Twelve pure shear surface waves guided by bimaterial clamped/free boundaries in magneto-electro-elastic materials
Authors:
Arman Melkumyan
Abstract:
It is shown that surface waves with twelve different velocities in the cases of different magneto-electrical boundary conditions can be guided by the interface of two magneto-electro-elastic half-spaces. The plane boundary of one of the half-spaces is clamped while the plane boundary of the other one is free of stresses. The twelve velocities of propagation of these surface waves and the corresp…
▽ More
It is shown that surface waves with twelve different velocities in the cases of different magneto-electrical boundary conditions can be guided by the interface of two magneto-electro-elastic half-spaces. The plane boundary of one of the half-spaces is clamped while the plane boundary of the other one is free of stresses. The twelve velocities of propagation of these surface waves and the corresponding existence conditions are obtained in explicit forms. It is shown that the material coefficients of the half-space which has a clamped boundary have only quantitative influence on the surface waves and that the existence and absence of the possibility for the surface waves to be guided by the interface is determined by the material coefficients of the half-space which has a free boundary. The number of the possible different surface wave velocities decreases from 12 to 2 when the magneto-electro-elastic materials are changed to piezoelectric materials.
△ Less
Submitted 14 September, 2006;
originally announced September 2006.
-
New pure shear acoustic surface waves guided by cuts in magneto-electro-elastic materials
Authors:
Arman Melkumyan
Abstract:
It is shown that new pure shear acoustic surface waves with five different velocities can be guided by stress free plane cuts with different magneto-electrical properties in magneto-electro-elastic materials. The possibility for the surface waves to be guided by a cut in pairs, which is reported in this paper, is new in magneto-electro-elastic materials and has no counterpart in piezoelectric ma…
▽ More
It is shown that new pure shear acoustic surface waves with five different velocities can be guided by stress free plane cuts with different magneto-electrical properties in magneto-electro-elastic materials. The possibility for the surface waves to be guided by a cut in pairs, which is reported in this paper, is new in magneto-electro-elastic materials and has no counterpart in piezoelectric materials. The five velocities of propagation of the surface waves are obtained in explicit forms. It is shown that the possibility for the surface waves to be guided in pairs disappears and the number of surface waves decreases from 5 to 1 if the magneto-electro-elastic material is changed to a piezoelectric material.
△ Less
Submitted 12 July, 2006;
originally announced July 2006.
-
Eleven shear surface waves guided by inclusions in magneto-electro-elastic materials
Authors:
Arman Melkumyan
Abstract:
Eleven pure shear surface waves are shown to exist in magneto-electro-elastic materials, which contain different plane inclusions inside them. The plane inclusions affect the electric and magnetic fields only, so that the medium remains mechanically continuous across it. Expressions for velocities of propagation of these 11 surface waves are obtained in explicit forms. It is expected that these…
▽ More
Eleven pure shear surface waves are shown to exist in magneto-electro-elastic materials, which contain different plane inclusions inside them. The plane inclusions affect the electric and magnetic fields only, so that the medium remains mechanically continuous across it. Expressions for velocities of propagation of these 11 surface waves are obtained in explicit forms. It is expected that these waves will have several applications in surface acoustic wave devices.
△ Less
Submitted 12 July, 2006;
originally announced July 2006.
-
New pure shear elastic surface waves in magneto-electro-elastic half-space
Authors:
Arman Melkumyan
Abstract:
Pure shear surface waves guided by the free surface of a magneto-electro-elastic material are investigated. Three surface waves are obtained for various magneto-electrical conditions on the free surface of the magneto-electro-elastic half-space. The velocities of propagation and the existence conditions for each of these waves are obtained in explicit exact form.
Pure shear surface waves guided by the free surface of a magneto-electro-elastic material are investigated. Three surface waves are obtained for various magneto-electrical conditions on the free surface of the magneto-electro-elastic half-space. The velocities of propagation and the existence conditions for each of these waves are obtained in explicit exact form.
△ Less
Submitted 12 July, 2006;
originally announced July 2006.
-
Twelve shear surface waves guided by clamped/free boundaries in magneto-electro-elastic materials
Authors:
Arman Melkumyan
Abstract:
It is shown that surface waves with twelve different velocities in the cases of different magneto-electrical boundary conditions can be guided by the interface of two identical magneto-electro-elastic half-spaces. The plane boundary of one of the half-spaces is clamped while the plane boundary of the other one is free of stresses. The 12 velocities of propagation of these surface waves are obtai…
▽ More
It is shown that surface waves with twelve different velocities in the cases of different magneto-electrical boundary conditions can be guided by the interface of two identical magneto-electro-elastic half-spaces. The plane boundary of one of the half-spaces is clamped while the plane boundary of the other one is free of stresses. The 12 velocities of propagation of these surface waves are obtained is explicit forms. It is shown that the number of different surface wave velocities decreases from 12 to 2 if the magneto-electro-elastic material is changed to a piezoelectric material.
△ Less
Submitted 12 July, 2006;
originally announced July 2006.