Showing 1–15 of 15 results for author: Melati, D

Stimulated Forward Brillouin Scattering in Subwavelength Silicon Membranes

Authors: Paula Nuño Ruano, Jianhao Zhang, David González-Andrade, Daniele Melati, Eric Cassan, Pavel Cheben, Laurent Vivien, Norberto Daniel Lanzillotti-Kimura, Carlos Alonso-Ramos

Abstract: On-chip Brillouin scattering plays a key role in numerous applications in the domain of signal processing and microwave photonics due to the coherent bidirectional coupling between near-infrared optical signals and GHz mechanical modes, which enables selective amplification and attenuation with remarkably narrow linewidths, in the kHz to MHz range. Subwavelength periodic nanostructures provide pre… ▽ More On-chip Brillouin scattering plays a key role in numerous applications in the domain of signal processing and microwave photonics due to the coherent bidirectional coupling between near-infrared optical signals and GHz mechanical modes, which enables selective amplification and attenuation with remarkably narrow linewidths, in the kHz to MHz range. Subwavelength periodic nanostructures provide precise control of the propagation of light and sound in silicon photonic circuits, key to maximize the efficiency of Brillouin interactions. Here, we propose and demonstrate a new subwavelength waveguide geometry allowing independent control of optical and mechanical modes. Two silicon lattices are combined, one with a subwavelength period for the light and one with a total bandgap for the sound, to confine optical and mechanical modes, respectively. Based on this approach, we experimentally demonstrate optomechanical coupling between near-infrared optical modes and GHz mechanical modes with with 5-8 MHz linewidth and a coupling strength of GB = 1360 1/(W m). A Stokes gain of 1.5 dB, and anti-Stoke loss of -2 dB are observed for a 6 mm-long waveguide with 35.5 mW of input power. We show tuning of the mechanical frequency between 5 and 8 GHz by geometrical optimization, without loss of the optomechanical coupling strength. △ Less

Submitted 23 February, 2024; originally announced February 2024.

Perfectly vertical silicon metamaterial grating couplers with large segmentation periods up to 650 nm

Authors: Jianhao Zhang, Daniele Melati, Yuri Grinberg, Martin Vachon, Shurui Wang, Muhammad Al-Digeil, Siegfried Janz, Jens H. Schmid, Pavel Cheben, Dan-Xia Xu

Abstract: Perfectly vertical grating couplers leveraging metamaterials can achieve both high coupling efficiency and minimal back reflection. The fabricability of these designs, with segmentations in both the longitudinal and transverse dimensions, hinges on the minimum feature size offered by cutting-edge fabrication technologies. In this work we present both numerical and experimental evidence that high p… ▽ More Perfectly vertical grating couplers leveraging metamaterials can achieve both high coupling efficiency and minimal back reflection. The fabricability of these designs, with segmentations in both the longitudinal and transverse dimensions, hinges on the minimum feature size offered by cutting-edge fabrication technologies. In this work we present both numerical and experimental evidence that high performance devices can be obtained while using large transverse segmentation periods of up to 650 nm, thereby increasing the critical feature sizes. For single-step etched couplers produced on the 220 nm silicon-on-insulator platform, we demonstrate coupling efficiencies of nearly 50% in the C-band and remarkably low back reflections of -22 dB at zero-degree incidence angle. Notably, the duty cycles used in our optimized designs deviate significantly from those predicted by traditional effective medium models, even for small periods. Our findings promise to expand the range of optical properties achievable in metamaterials and offer fresh insights into the fine-tuning of nanophotonic devices. △ Less

Submitted 18 November, 2023; originally announced November 2023.

Optical wavefront phase-tilt measurement using Si-photonic waveguide grating couplers

Authors: Siegfried Janz, Dan-Xia Xu, Yuri Grinberg, Shurui Wang, Martin Vachon, Pavel Cheben, Jens H. Schmid, Daniele Melati

Abstract: Silicon photonic wavefront phase-tilt sensors for wavefront monitoring using surface coupling grating arrays are demonstrated. The first design employs the intrinsic angle dependence of the grating coupling efficiency to determine local wavefront tilt, with a measured sensitivity of 7 dB/degree. A second design connects four gratings in an interferometric waveguide circuit to determine incident wa… ▽ More Silicon photonic wavefront phase-tilt sensors for wavefront monitoring using surface coupling grating arrays are demonstrated. The first design employs the intrinsic angle dependence of the grating coupling efficiency to determine local wavefront tilt, with a measured sensitivity of 7 dB/degree. A second design connects four gratings in an interferometric waveguide circuit to determine incident wavefront phase variation across the sensor area. In this device, one fringe spacing corresponds to approximately 2 degree wavefront tilt change. These sensor elements can sample a wavefront incident on the chip surface without the use of bulk optic elements, fiber arrays, or imaging arrays. Both sensor elements are less than 60 um across, and can be combined into larger arrays to monitor wavefront tilt and distortion across an image or pupil plane in adaptive optics systems for free space optical communications, astronomy and beam pointing applications. △ Less

Submitted 20 September, 2023; originally announced September 2023.

Highly efficient ultra-broad beam silicon nanophotonic antenna based on near-field phase engineering

Authors: Shahrzad Khajavi, Daniele Melati, Pavel Cheben, Jens H. Schmid, Carlos A. Alonso Ramos, Winnie N. Ye

Abstract: Optical antennas are a fundamental element in optical phased arrays (OPA) and free-space optical interconnects. An outstanding challenge in optical antenna design lies in achieving high radiation efficiency, ultra-compact footprint and broad radiation angle simultaneously, as required for dense 2D OPAs with a broad steering range. Here we demonstrate a fundamentally new concept of a nanophotonic a… ▽ More Optical antennas are a fundamental element in optical phased arrays (OPA) and free-space optical interconnects. An outstanding challenge in optical antenna design lies in achieving high radiation efficiency, ultra-compact footprint and broad radiation angle simultaneously, as required for dense 2D OPAs with a broad steering range. Here we demonstrate a fundamentally new concept of a nanophotonic antenna based on near-field phase-engineering. By introducing a specific near-field phase factor in the Fraunhofer transformation, the far-field beam is widened beyond the diffraction limit for a given aperture size. We use transversally interleaved subwavelength grating nanostructures to control the near-field phase. The antenna reaches a radiation efficiency of 82%, a compact footprint of 3.1 um * 1.75 um and an ultra-broad far-field beam width of 52° and 62° in the longitudinal and transversal direction, respectively. This unprecedented design performance is achieved with a single-etch grating nanostructure in a 300-nm SOI platform. △ Less

Submitted 1 September, 2022; originally announced September 2022.

Comments: 8 pages, 4 figures

Broadband behavior of quadratic metalenses with a wide field of view

Authors: Yang Liu, Jianhao Zhang, Xavier Le Roux, Eric Cassan, Delphine Marris-Morini, Laurent Vivien, Carlos Alonso-Ramos, Daniele Melati

Abstract: Metalenses are attracting a large interest for the implementation of complex optical functionalities in planar and compact devices. However, chromatic and off-axis aberrations remain standing challenges. Here, we experimentally investigate the broadband behavior of metalenses based on quadratic phase profiles. We show that these metalenses do not only guarantee an arbitrarily large field of view b… ▽ More Metalenses are attracting a large interest for the implementation of complex optical functionalities in planar and compact devices. However, chromatic and off-axis aberrations remain standing challenges. Here, we experimentally investigate the broadband behavior of metalenses based on quadratic phase profiles. We show that these metalenses do not only guarantee an arbitrarily large field of view but are also inherently tolerant to longitudinal and transverse chromatic aberrations. As such, we demonstrate a single-layer, silicon metalens with a field of view of 86° and a bandwidth up to 140 nm operating at both 1300 nm and 1550 nm telecommunication wavelength bands. △ Less

Submitted 8 June, 2022; originally announced June 2022.

Dispersive wave control enabled by silicon metamaterial waveguides

Authors: T. T. D. Dinh, X. Le Roux, M. Montesinos-Ballester, C. Lafforgue, J. Zhang, D. González-Andrade, D. Melati, D. Bouville, D. Benedikovic, P. Cheben, E. Cassan, D. Marris-Morini, L. Vivien, C. Alonso-Ramos

Abstract: The ability to exploit the on-chip nonlinear generation of new frequencies has opened the door to a plethora of applications in fundamental and applied physics. Excitation of dispersive waves is a particularly interesting process that allows efficient nonlinear wavelength conversion by phase-matching of a soliton and waves in the normal dispersion regime. However, controlling the wavelength of dis… ▽ More The ability to exploit the on-chip nonlinear generation of new frequencies has opened the door to a plethora of applications in fundamental and applied physics. Excitation of dispersive waves is a particularly interesting process that allows efficient nonlinear wavelength conversion by phase-matching of a soliton and waves in the normal dispersion regime. However, controlling the wavelength of dispersive waves in integrated waveguides remains an open challenge, hampering versatile sha** of the nonlinear spectral response. Here, we show that metamaterial silicon waveguides release new degrees of freedom to select the wavelength of dispersive waves. Based on this concept, we experimentally demonstrate excitation of two dispersive waves near 1.55 μm and 7.5 μm allowing ultra-wideband supercontinuum generation, covering most of the silicon transparency window. These results stand as an important milestone for versatile nonlinear frequency generation in silicon chips, with a great potential for applications in sensing, metrology and communications. △ Less

Submitted 17 January, 2022; originally announced January 2022.

Athermal and tunable echelle grating wavelength demultiplexers using a Mach-Zehnder interferometer launch structure

Authors: Daniele Melati, Dan-Xia Xu, Ross Cheriton, Shurui Wang, Martin Vachon, Jens H. Schmid, Pavel Cheben, Siegfried Janz

Abstract: We present a comparative experimental study of three silicon photonic echelle grating demultiplexers that are integrated with a Mach-Zehnder interferometer (MZI) launch structure. By appropriate choice of the MZI configuration, the temperature induced shift of the demultiplexer channel wavelengths can be suppressed (athermal) or enhanced (super-thermal), or be controlled by an on-chip micro-heater… ▽ More We present a comparative experimental study of three silicon photonic echelle grating demultiplexers that are integrated with a Mach-Zehnder interferometer (MZI) launch structure. By appropriate choice of the MZI configuration, the temperature induced shift of the demultiplexer channel wavelengths can be suppressed (athermal) or enhanced (super-thermal), or be controlled by an on-chip micro-heater. The latter two configurations allow the channel wavelengths to be actively tuned using lower power than possible by temperature tuning a conventional echelle demultiplexer. In the athermal configuration, the measured channel spectral shift is reduced to less than 10 pm/C, compared to the 83 pm/C shift for an unmodified echelle device. In super-thermal operation an enhanced channel temperature tuning rate of 170 pm/C is achieved. Finally, by modulating the MZI phase with an on-chip heater, the demultiplexer channels can be actively tuned to correct for ambient temperature fluctuations up to 20 C, using a drive current of less than 20 mA. △ Less

Submitted 7 January, 2022; originally announced January 2022.

Comments: 16 pages, 8 figures

Mid-infrared Fourier-transform spectrometer based on metamaterial lateral cladding suspended silicon waveguides

Authors: Thi Thuy Duong Dinh, Xavier Le Roux, Natnicha Koompai, Daniele Melati, Miguel Montesinos-Ballester, David González-Andrade, Pavel Cheben, Aitor V. Velasco, Eric Cassan, Delphine Marris-Morini, Laurent Vivien, Carlos Alonso-Ramos

Abstract: Integrated mid-infrared micro-spectrometers have a great potential for applications in environmental monitoring and space exploration. Silicon-on-insulator (SOI) is a promising platform to tackle this integration challenge, due to its unique capability for large volume and low-cost production of ultra-compact photonic circuits. However, the use of SOI in the mid-infrared is restricted by the stron… ▽ More Integrated mid-infrared micro-spectrometers have a great potential for applications in environmental monitoring and space exploration. Silicon-on-insulator (SOI) is a promising platform to tackle this integration challenge, due to its unique capability for large volume and low-cost production of ultra-compact photonic circuits. However, the use of SOI in the mid-infrared is restricted by the strong absorption of the buried oxide layer for wavelengths beyond 4 μm. Here, we overcome this limitation by utilizing metamaterial-cladded suspended silicon waveguides to implement a spatial heterodyne Fourier-transform (SHFT) spectrometer operating near 5.5μm wavelength. The metamaterial-cladded geometry allows removal of the buried oxide layer, yielding measured propagation loss below 2 dB/cm between 5.3μm and 5.7μm wavelengths. The SHFT spectrometer comprises 19 Mach-Zehnder interferometers with a maximum arm length imbalance of 200 μm, achieving a measured spectral resolution of 13cm-1 and a free-spectral range of 100 cm-1 near 5.5μm wavelength. △ Less

Submitted 3 December, 2021; originally announced December 2021.

Design of Compact and Efficient Silicon Photonic Micro Antennas with Perfectly Vertical Emission

Authors: Daniele Melati, Mohsen Kamandar Dezfouli, Yuri Grinberg, Jens H. Schmid, Ross Cheriton, Siegfried Janz, Pavel Cheben, Dan-Xia Xu

Abstract: Compact and efficient optical antennas are fundamental components for many applications, including high-density fiber-chip coupling and optical phased arrays. Here we present the design of grating-based micro-antennas with perfectly vertical emission in the 300-nm silicon-on-insulator platform. We leverage a methodology combining adjoint optimization and machine learning dimensionality reduction t… ▽ More Compact and efficient optical antennas are fundamental components for many applications, including high-density fiber-chip coupling and optical phased arrays. Here we present the design of grating-based micro-antennas with perfectly vertical emission in the 300-nm silicon-on-insulator platform. We leverage a methodology combining adjoint optimization and machine learning dimensionality reduction to efficiently map the multiparameter design space of the antennas, analyse a large number of relevant performance metrics, carry out the required multi-objective optimization, and discover high performance designs. Using a one-step apodized grating we achieve a vertical upward diffraction efficiency of almost 92% with a 3.6 μm-long antenna. When coupled with an ultra-high numerical aperture fiber, the antenna exhibits a coupling efficiency of more than 81% (-0.9 dB) and a 1-dB bandwidth of almost 158 nm. The reflection generated by the perfectly vertical antenna is smaller than -20 dB on a 200-nm bandwidth centered at λ = 1550 nm. △ Less

Submitted 7 August, 2020; v1 submitted 6 August, 2020; originally announced August 2020.

Spectrum-free integrated photonic remote molecular identification and sensing

Authors: Ross Cheriton, Suresh Sivanandam, Adam Densmore, Ernst J. W. de Mooij, Daniele Melati, Mohsen Kamandar Dezfouli, Pavel Cheben, Danxia Xu, Jens H. Schmid, Jean Lapointe, Rubin Ma, Shurui Wang, Luc Simard, Siegfried Janz

Abstract: Absorption spectroscopy is widely used in sensing and astronomy to understand molecular compositions on microscopic to cosmological scales. However, typical dispersive spectroscopic techniques require multichannel detection, fundamentally limiting the ability to detect extremely weak signals when compared to direct photometric methods. We report the realization of direct spectral molecular detecti… ▽ More Absorption spectroscopy is widely used in sensing and astronomy to understand molecular compositions on microscopic to cosmological scales. However, typical dispersive spectroscopic techniques require multichannel detection, fundamentally limiting the ability to detect extremely weak signals when compared to direct photometric methods. We report the realization of direct spectral molecular detection using a silicon nanophotonic waveguide resonator, obviating dispersive spectral acquisition. We use a thermally tunable silicon ring resonator with a transmission spectrum matched and cross-correlated to the quasi-periodic vibronic absorption lines of hydrogen cyanide. We show that the correlation peak amplitude is proportional to the number of overlap** ring resonances and gas lines, and that molecular specificity is obtained from the phase of the correlation signal in a single detection channel. Our results demonstrate on-chip correlation spectroscopy that is less restricted by the signal-to-noise penalty of other spectroscopic approaches, enabling the detection of faint spectral signatures. △ Less

Submitted 26 August, 2020; v1 submitted 18 May, 2020; originally announced May 2020.

Isolator-free Integration of C-band InAs-InP Quantum Dash Buried Heterostructure Lasers with Silicon Waveguides

Authors: Jens H. Schmid, Mohamed Rahim, Grzegorz Pakulski, Martin Vachon, Siegfried Janz, Pavel Cheben, Dan-Xia Xu, Philip J. Poole, Pedro Barrios, Weihong Jiang, Jean Lapointe, Daniele Melati

Abstract: An InAs-on-InP quantum dash buried heterostructure laser and silicon chip optimized for mutual integration by direct facet-to-facet coupling have achieved -1.2 dB coupling efficiency, with coupled laser RIN of -150 dB/Hz and 152 kHz linewidth. An InAs-on-InP quantum dash buried heterostructure laser and silicon chip optimized for mutual integration by direct facet-to-facet coupling have achieved -1.2 dB coupling efficiency, with coupled laser RIN of -150 dB/Hz and 152 kHz linewidth. △ Less

Submitted 30 March, 2020; originally announced May 2020.

Photonic Temperature and Wavelength Metrology by Spectral Pattern Recognition

Authors: Siegfried Janz, Ross Cheriton, Dan-Xia Xu, Aadam Densmore, Sergey Dedyulin, Andrew Todd, Jens Schmid, Pavel Cheben, Martin Vachon, Mohsen Kamandar Dezfouli, Daniele Melati

Abstract: Spectral pattern recognition is used to measure temperature and generate calibrated wavelength/frequency combs using a single silicon waveguide ring resonator. The ring generates two incommensurate interleaving TE and TM spectral combs that shift independently with temperature to create a spectral pattern that is unique at every temperature. Following an initial calibration, the ring temperature c… ▽ More Spectral pattern recognition is used to measure temperature and generate calibrated wavelength/frequency combs using a single silicon waveguide ring resonator. The ring generates two incommensurate interleaving TE and TM spectral combs that shift independently with temperature to create a spectral pattern that is unique at every temperature. Following an initial calibration, the ring temperature can be determined by recognizing the spectral resonance pattern, and as a consequence the wavelength of every resonance is also known. Two methods of pattern based temperature retrieval are presented. In the first method, the ring is locked to a previously determined temperature set-point defined by the coincidence of only two specific TE and TM cavity modes. Based on a prior calibration at the set-point, the ring temperature and hence all resonance wavelengths are then known and the resulting comb can be used as a wavelength calibration reference. In this configuration, all reference comb wavelengths have been reproduced within a 5 pm accuracy across an 80 nm range by using an on-chip micro-heater to tune the ring. For more general photonic thermometry, a spectral correlation algorithm is developed to recognize a resonance pattern across a 30 nm wide spectral window and thereby determine ring temperature continuously to 50 mK accuracy. The correlation method is extended to simultaneously determine temperature and to identify and correct for wavelength calibration errors in the interrogating light source. The temperature and comb wavelength accuracy is limited primarily by the linewidth of the ring resonances, with accuracy and resolution scaling with the ring quality factor. △ Less

Submitted 18 April, 2020; originally announced April 2020.

Comments: 15 pages, 11 figures

Map** the global design space of nanophotonic components using machine learning pattern recognition

Authors: Daniele Melati, Yuri Grinberg, Mohsen Kamandar Dezfouli, Siegfried Janz, Pavel Cheben, Jens H. Schmid, Alejandro Sánchez-Postigo, Dan-Xia Xu

Abstract: Nanophotonics finds ever broadening applications requiring complex component designs with a large number of parameters to be simultaneously optimized. Recent methodologies employing optimization algorithms commonly focus on a single design objective, provide isolated designs, and do not describe how the design parameters influence the device behaviour. Here we propose and demonstrate a machine-lea… ▽ More Nanophotonics finds ever broadening applications requiring complex component designs with a large number of parameters to be simultaneously optimized. Recent methodologies employing optimization algorithms commonly focus on a single design objective, provide isolated designs, and do not describe how the design parameters influence the device behaviour. Here we propose and demonstrate a machine-learning-based approach to map and characterize the multi-parameter design space of nanophotonic components. Pattern recognition is used to reveal the relationship between an initial sparse set of optimized designs through a significant reduction in the number of characterizing parameters. This defines a design sub-space of lower dimensionality that can be mapped faster by orders of magnitude than the original design space. As a result, multiple performance criteria are clearly visualized, revealing the interplay of the design parameters, highlighting performance and structural limitations, and inspiring new design ideas. This global perspective on high-dimensional design problems represents a major shift in how modern nanophotonic design is approached and provides a powerful tool to explore complexity in next-generation devices. △ Less

Submitted 15 May, 2019; v1 submitted 19 October, 2018; originally announced November 2018.

Reconfigurable photonic integrated mode (de)multiplexer for SDM fiber transmission

Authors: Daniele Melati, Andrea Alippi, Andrea Melloni

Abstract: A photonic integrated circuit for mode multiplexing and demultiplexing in a few-mode fiber is presented and demonstrated. Two 10 Gbit/s channels at the same wavelength and polarization are simultaneously transmitted over modes LP01 and LP11a of a few-mode fiber exploiting the integrated mode MUX and DEMUX. The proposed Indium-Phosphide-based circuits have a good coupling efficiency with fiber mode… ▽ More A photonic integrated circuit for mode multiplexing and demultiplexing in a few-mode fiber is presented and demonstrated. Two 10 Gbit/s channels at the same wavelength and polarization are simultaneously transmitted over modes LP01 and LP11a of a few-mode fiber exploiting the integrated mode MUX and DEMUX. The proposed Indium-Phosphide-based circuits have a good coupling efficiency with fiber modes with mode-dependant loss smaller than 1 dB. Measured mode excitation cross-talk is as low as -20 dB and a channel cross-talk after propagation and demultiplexing of -15 dB is achieved. An operational bandwidth of the full transmission system of at least 10 nm is demonstrated. Both mode MUX and DEMUX are fully reconfigurable and allow a dynamic switch of channel routing in the transmission system. △ Less

Submitted 1 March, 2016; v1 submitted 26 February, 2016; originally announced February 2016.

ContactLess Integrated Photonic Probe for light monitoring in InP-based devices

Authors: Daniele Melati, Marco Carminati, Stefano Grillanda, Giorgio Ferrari, Francesco Morichetti, Marco Sampietro, Andrea Melloni

Abstract: The increasing complexity of photonic integrated circuits requires the possibility to monitor the state of the circuit in order to stabilize the working point against environmental fluctuations or to perform reliable reconfiguration procedures. Although InP technologies can naturally integrate high-quality photodiodes, their use as tap monitors necessarily affects the circuit response and is restr… ▽ More The increasing complexity of photonic integrated circuits requires the possibility to monitor the state of the circuit in order to stabilize the working point against environmental fluctuations or to perform reliable reconfiguration procedures. Although InP technologies can naturally integrate high-quality photodiodes, their use as tap monitors necessarily affects the circuit response and is restricted to few units per chip. They are hence unsuited for very large circuits, where transparent power monitors become key components. In this paper we present the implementation of a ContactLess Integrated Photonic Probe (CLIPP) realizing a non invasive integrated light monitor on InP-based devices. We describe an innovative vertical scheme of the CLIPP monitor which exploits the back side of the chip as a common electrode, thus enabling a reduction of the device footprint and a simplification of the electrical connectivity. We characterize the response of the CLIPP and demonstrate its functionality as power monitor. Lastly, we provide a direct demonstration that CLIPP monitor allows to access more accurate information on the working point of photonic integrated circuits compared to conventional external or integrated photodetectors. △ Less

Submitted 18 December, 2014; originally announced December 2014.