-
Roadmap on Photovoltaic Absorber Materials for Sustainable Energy Conversion
Authors:
James C. Blakesley,
Ruy S. Bonilla,
Marina Freitag,
Alex M. Ganose,
Nicola Gasparini,
Pascal Kaienburg,
George Koutsourakis,
Jonathan D. Major,
Jenny Nelson,
Nakita K. Noel,
Bart Roose,
Jae Sung Yun,
Simon Aliwell,
Pietro P. Altermatt,
Tayebeh Ameri,
Virgil Andrei,
Ardalan Armin,
Diego Bagnis,
Jenny Baker,
Hamish Beath,
Mathieu Bellanger,
Philippe Berrouard,
Jochen Blumberger,
Stuart A. Boden,
Hugo Bronstein
, et al. (61 additional authors not shown)
Abstract:
Photovoltaics (PVs) are a critical technology for curbing growing levels of anthropogenic greenhouse gas emissions, and meeting increases in future demand for low-carbon electricity. In order to fulfil ambitions for net-zero carbon dioxide equivalent (CO<sub>2</sub>eq) emissions worldwide, the global cumulative capacity of solar PVs must increase by an order of magnitude from 0.9 TWp in 2021 to 8.…
▽ More
Photovoltaics (PVs) are a critical technology for curbing growing levels of anthropogenic greenhouse gas emissions, and meeting increases in future demand for low-carbon electricity. In order to fulfil ambitions for net-zero carbon dioxide equivalent (CO<sub>2</sub>eq) emissions worldwide, the global cumulative capacity of solar PVs must increase by an order of magnitude from 0.9 TWp in 2021 to 8.5 TWp by 2050 according to the International Renewable Energy Agency, which is considered to be a highly conservative estimate. In 2020, the Henry Royce Institute brought together the UK PV community to discuss the critical technological and infrastructure challenges that need to be overcome to address the vast challenges in accelerating PV deployment. Herein, we examine the key developments in the global community, especially the progress made in the field since this earlier roadmap, bringing together experts primarily from the UK across the breadth of the photovoltaics community. The focus is both on the challenges in improving the efficiency, stability and levelized cost of electricity of current technologies for utility-scale PVs, as well as the fundamental questions in novel technologies that can have a significant impact on emerging markets, such as indoor PVs, space PVs, and agrivoltaics. We discuss challenges in advanced metrology and computational tools, as well as the growing synergies between PVs and solar fuels, and offer a perspective on the environmental sustainability of the PV industry. Through this roadmap, we emphasize promising pathways forward in both the short- and long-term, and for communities working on technologies across a range of maturity levels to learn from each other.
△ Less
Submitted 30 October, 2023;
originally announced October 2023.
-
Linking Symptom Inventories using Semantic Textual Similarity
Authors:
Eamonn Kennedy,
Shashank Vadlamani,
Hannah M Lindsey,
Kelly S Peterson,
Kristen Dams OConnor,
Kenton Murray,
Ronak Agarwal,
Houshang H Amiri,
Raeda K Andersen,
Talin Babikian,
David A Baron,
Erin D Bigler,
Karen Caeyenberghs,
Lisa Delano-Wood,
Seth G Disner,
Ekaterina Dobryakova,
Blessen C Eapen,
Rachel M Edelstein,
Carrie Esopenko,
Helen M Genova,
Elbert Geuze,
Naomi J Goodrich-Hunsaker,
Jordan Grafman,
Asta K Haberg,
Cooper B Hodges
, et al. (57 additional authors not shown)
Abstract:
An extensive library of symptom inventories has been developed over time to measure clinical symptoms, but this variety has led to several long standing issues. Most notably, results drawn from different settings and studies are not comparable, which limits reproducibility. Here, we present an artificial intelligence (AI) approach using semantic textual similarity (STS) to link symptoms and scores…
▽ More
An extensive library of symptom inventories has been developed over time to measure clinical symptoms, but this variety has led to several long standing issues. Most notably, results drawn from different settings and studies are not comparable, which limits reproducibility. Here, we present an artificial intelligence (AI) approach using semantic textual similarity (STS) to link symptoms and scores across previously incongruous symptom inventories. We tested the ability of four pre-trained STS models to screen thousands of symptom description pairs for related content - a challenging task typically requiring expert panels. Models were tasked to predict symptom severity across four different inventories for 6,607 participants drawn from 16 international data sources. The STS approach achieved 74.8% accuracy across five tasks, outperforming other models tested. This work suggests that incorporating contextual, semantic information can assist expert decision-making processes, yielding gains for both general and disease-specific clinical assessment.
△ Less
Submitted 8 September, 2023;
originally announced September 2023.
-
Development of a timing chip prototype in 110 nm CMOS technology
Authors:
Matias Senger,
Lea Caminada,
Benjamin Kilminster,
Anna Macchiolo,
Beat Meier,
Stephan Wiederkehr
Abstract:
We present a readout chip prototype for future pixel detectors with timing capabilities. The prototype is intended for characterizing 4D pixel arrays with a pixel size of $100\times100~μ\text{m}^2$, where the sensors are Low Gain Avalanche Diodes (LGADs). The long-term focus is towards a possible replacement of disks in the extended forward pixel system (TEPX) of the CMS experiment during the High…
▽ More
We present a readout chip prototype for future pixel detectors with timing capabilities. The prototype is intended for characterizing 4D pixel arrays with a pixel size of $100\times100~μ\text{m}^2$, where the sensors are Low Gain Avalanche Diodes (LGADs). The long-term focus is towards a possible replacement of disks in the extended forward pixel system (TEPX) of the CMS experiment during the High Luminosity LHC (HL-LHC). The requirements for this ASIC are the incorporation of a Time to Digital Converter (TDC) within each pixel, low power consumption, and radiation tolerance up to $5\times10^{15}~n_\text{eq}\text{~cm}^{-2}$ to withstand the radiation levels in the innermost detector modules for $3000 \text{fb}^{-1}$ of the HL-LHC (in the TEPX). A prototype has been designed and produced in 110~nm CMOS technology at LFoundry and UMC with different versions of TDC structures, together with a front end circuitry to interface with the sensors. The design of the TDC will be discussed, with the test set-up for the measurements, and the first results comparing the performance of the different structures.
△ Less
Submitted 13 February, 2023;
originally announced February 2023.
-
Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
J. P. Figueiredo de sa Sousa de Almeida,
P. G. Dias de Almeida,
A. Alpana,
M. Alyari,
I. Andreev,
U. Aras,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Banerjee,
P. DeBarbaro,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (435 additional authors not shown)
Abstract:
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med…
▽ More
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data.
△ Less
Submitted 27 May, 2023; v1 submitted 9 November, 2022;
originally announced November 2022.
-
Radical-induced Hetero-Nuclear Mixing and Low-field $^{13}$C Relaxation in Solid Pyruvic Acid
Authors:
Hana Kouřilová,
Michael Jurkutat,
David Peat,
Karel Kouřil,
Alixander S. Khan,
Anthony J. Horsewill,
James F. MacDonald,
John Owers-Bradley,
Benno Meier
Abstract:
Radicals serve as source in dynamic nuclear polarization, but may also act as polarization sink. If the coupling between the electron spins and different nuclear reservoirs is stronger than any of the reservoirs' couplings to the lattice, radicals can mediate hetero-nuclear mixing. Here, we report radical-enhanced $^{13}$C relaxation in pyruvic acid doped with trityl. We find a linear dependence o…
▽ More
Radicals serve as source in dynamic nuclear polarization, but may also act as polarization sink. If the coupling between the electron spins and different nuclear reservoirs is stronger than any of the reservoirs' couplings to the lattice, radicals can mediate hetero-nuclear mixing. Here, we report radical-enhanced $^{13}$C relaxation in pyruvic acid doped with trityl. We find a linear dependence of the carbon $T_1$ on field between 5 mT and 2 T. We extend a model, employed previously for protons, to carbon, and predict efficient proton-carbon mixing via the radical Non-Zeeman reservoir, for fields from 20 mT to beyond 1 T. Discrepancies between the observed carbon relaxation and the model are attributed to enhanced direct hetero-nuclear mixing due to trityl-induced linebroadening, and a field-dependent carbon diffusion from the radical vicinity to the bulk. Measurements of hetero-nuclear polarization transfer up to 600 mT confirm the predicted mixing as well as both effects inferred from the relaxation analysis.
△ Less
Submitted 1 August, 2022; v1 submitted 11 February, 2022;
originally announced February 2022.
-
Technical design of the phase I Mu3e experiment
Authors:
K. Arndt,
H. Augustin,
P. Baesso,
N. Berger,
F. Berg,
C. Betancourt,
D. Bortoletto,
A. Bravar,
K. Briggl,
D. vom Bruch,
A. Buonaura,
F. Cadoux,
C. Chavez Barajas,
H. Chen,
K. Clark,
P. Cooke,
S. Corrodi,
A. Damyanova,
Y. Demets,
S. Dittmeier,
P. Eckert,
F. Ehrler,
D. Fahrni,
S. Gagneur,
L. Gerritzen
, et al. (80 additional authors not shown)
Abstract:
The Mu3e experiment aims to find or exclude the lepton flavour violating decay $μ\rightarrow eee$ at branching fractions above $10^{-16}$. A first phase of the experiment using an existing beamline at the Paul Scherrer Institute (PSI) is designed to reach a single event sensitivity of $2\cdot 10^{-15}$. We present an overview of all aspects of the technical design and expected performance of the p…
▽ More
The Mu3e experiment aims to find or exclude the lepton flavour violating decay $μ\rightarrow eee$ at branching fractions above $10^{-16}$. A first phase of the experiment using an existing beamline at the Paul Scherrer Institute (PSI) is designed to reach a single event sensitivity of $2\cdot 10^{-15}$. We present an overview of all aspects of the technical design and expected performance of the phase~I Mu3e detector. The high rate of up to $10^{8}$ muon decays per second and the low momenta of the decay electrons and positrons pose a unique set of challenges, which we tackle using an ultra thin tracking detector based on high-voltage monolithic active pixel sensors combined with scintillating fibres and tiles for precise timing measurements.
△ Less
Submitted 26 August, 2021; v1 submitted 24 September, 2020;
originally announced September 2020.
-
Reducing bias in the analysis of solution-state NMR data with dynamics detectors
Authors:
Albert A. Smith,
Matthias Ernst,
Beat H. Meier,
Fabien Ferrage
Abstract:
Nuclear magnetic resonance (NMR) is sensitive to dynamics on a wide range of correlation times. Recently, we have shown that analysis of relaxation rates via fitting to a correlation function with a small number of exponential terms could yield a biased characterization of molecular motion in solid-state NMR, due to limited sensitivity of experimental data to certain ranges of correlation times. W…
▽ More
Nuclear magnetic resonance (NMR) is sensitive to dynamics on a wide range of correlation times. Recently, we have shown that analysis of relaxation rates via fitting to a correlation function with a small number of exponential terms could yield a biased characterization of molecular motion in solid-state NMR, due to limited sensitivity of experimental data to certain ranges of correlation times. We introduced an alternative approach based on 'detectors' in solid-state NMR, for which detector responses characterize motion for a range of correlation times, and reduce potential bias resulting from the use of simple models for the motional correlation functions. Here, we show that similar bias can occur in the analysis of solution-state NMR relaxation data. We have thus adapted the detector approach to solution-state NMR, specifically separating overall tumbling motion from internal motions and accounting for contributions of chemical exchange to transverse relaxation. We demonstrate that internal protein motions can be described with detectors when the overall motion and the internal motions are statistically independent. We illustrate the detector analysis on ubiquitin with typical relaxation data sets recorded at a single or at multiple high magnetic fields, and compare with results of model-free analysis. We also compare our methodology to LeMaster's method of dynamics analysis.
△ Less
Submitted 21 May, 2019; v1 submitted 5 December, 2018;
originally announced December 2018.
-
Deep Learning in the Wild
Authors:
Thilo Stadelmann,
Mohammadreza Amirian,
Ismail Arabaci,
Marek Arnold,
Gilbert François Duivesteijn,
Ismail Elezi,
Melanie Geiger,
Stefan Lörwald,
Benjamin Bruno Meier,
Katharina Rombach,
Lukas Tuggener
Abstract:
Deep learning with neural networks is applied by an increasing number of people outside of classic research environments, due to the vast success of the methodology on a wide range of machine perception tasks. While this interest is fueled by beautiful success stories, practical work in deep learning on novel tasks without existing baselines remains challenging. This paper explores the specific ch…
▽ More
Deep learning with neural networks is applied by an increasing number of people outside of classic research environments, due to the vast success of the methodology on a wide range of machine perception tasks. While this interest is fueled by beautiful success stories, practical work in deep learning on novel tasks without existing baselines remains challenging. This paper explores the specific challenges arising in the realm of real world tasks, based on case studies from research \& development in conjunction with industry, and extracts lessons learned from them. It thus fills a gap between the publication of latest algorithmic and methodical developments, and the usually omitted nitty-gritty of how to make them work. Specifically, we give insight into deep learning projects on face matching, print media monitoring, industrial quality control, music scanning, strategy game playing, and automated machine learning, thereby providing best practices for deep learning in practice.
△ Less
Submitted 13 July, 2018;
originally announced July 2018.
-
Learning Neural Models for End-to-End Clustering
Authors:
Benjamin Bruno Meier,
Ismail Elezi,
Mohammadreza Amirian,
Oliver Durr,
Thilo Stadelmann
Abstract:
We propose a novel end-to-end neural network architecture that, once trained, directly outputs a probabilistic clustering of a batch of input examples in one pass. It estimates a distribution over the number of clusters $k$, and for each $1 \leq k \leq k_\mathrm{max}$, a distribution over the individual cluster assignment for each data point. The network is trained in advance in a supervised fashi…
▽ More
We propose a novel end-to-end neural network architecture that, once trained, directly outputs a probabilistic clustering of a batch of input examples in one pass. It estimates a distribution over the number of clusters $k$, and for each $1 \leq k \leq k_\mathrm{max}$, a distribution over the individual cluster assignment for each data point. The network is trained in advance in a supervised fashion on separate data to learn grou** by any perceptual similarity criterion based on pairwise labels (same/different group). It can then be applied to different data containing different groups. We demonstrate promising performance on high-dimensional data like images (COIL-100) and speech (TIMIT). We call this ``learning to cluster'' and show its conceptual difference to deep metric learning, semi-supervise clustering and other related approaches while having the advantage of performing learnable clustering fully end-to-end.
△ Less
Submitted 11 July, 2018;
originally announced July 2018.
-
Scalable Dissolution-Dynamic Nuclear Polarization with Rapid Transfer of a Polarized Solid
Authors:
Karel Kouřil,
Hana Kouřilová,
Samuel Bartram,
Malcolm H. Levitt,
Benno Meier
Abstract:
In dissolution-dynamic nuclear polarization, nuclear spins are hyperpolarized at cryogenic temperatures using radicals and microwave irradiation. The hyperpolarized solid is dissolved with hot solvent and the solution is transferred to a secondary magnet where strongly enhanced magnetic resonance signals are observed. Here we present a method for transferring the hyperpolarized solid. A bullet con…
▽ More
In dissolution-dynamic nuclear polarization, nuclear spins are hyperpolarized at cryogenic temperatures using radicals and microwave irradiation. The hyperpolarized solid is dissolved with hot solvent and the solution is transferred to a secondary magnet where strongly enhanced magnetic resonance signals are observed. Here we present a method for transferring the hyperpolarized solid. A bullet containing the frozen, hyperpolarized sample is ejected using pressurized helium gas, and shot into a receiving structure in the secondary magnet, where the bullet is retained and the polarized solid is dissolved rapidly. The transfer takes approximately 70 ms. A solenoid, wound along the entire transfer path ensures adiabatic transfer and limits radical-induced low-field relaxation. The method is fast and scalable towards small volumes suitable for high-resolution nuclear magnetic resonance spectroscopy while maintaining high concentrations of the target molecule. Polarization levels of approximately 30% have been observed for 1-$^{\sf 13}$C-labelled pyruvic acid in solution.
△ Less
Submitted 19 June, 2019; v1 submitted 30 June, 2018;
originally announced July 2018.
-
Spin-isomer conversion of water at room temperature, and quantum-rotor-induced nuclear polarization, in the water-endofullerene H$_2$O@C$_{60}$
Authors:
Benno Meier,
Karel Kouřil,
Christian Bengs,
Hana Kouřilová,
Timothy J. Barker,
Stuart J. Elliott,
Shamim Alom,
Richard J. Whitby,
Malcolm H. Levitt
Abstract:
Water exists in two forms, para and ortho, that have nuclear spin states with different symmetries. Here we report the conversion of fullerene-encapsulated para-water to ortho-water. The enrichment of para-water at low temperatures is monitored via changes in the electrical polarizability of the material. Upon rapid dissolution of the material in toluene the excess para-water converts to ortho- wa…
▽ More
Water exists in two forms, para and ortho, that have nuclear spin states with different symmetries. Here we report the conversion of fullerene-encapsulated para-water to ortho-water. The enrichment of para-water at low temperatures is monitored via changes in the electrical polarizability of the material. Upon rapid dissolution of the material in toluene the excess para-water converts to ortho- water. In H$_2{}^{16}$O@C$_{60}$ the conversion leads to a slow increase in the NMR signal. In H$_2{}^{16}$O@C$_{60}$ the conversion gives rise to weak signal enhancements attributed to quantum-rotor-induced nuclear spin polarization. The time constants for the spin-isomer conversion of fullerene-encapsulated water in ambient temperature solution are estimated as 30$\pm$4 s for the $^{16}$O-isotopologue of water, and 16$\pm$3 s for the $^{17}$O isotopologue.
△ Less
Submitted 2 February, 2018;
originally announced February 2018.
-
Test Beam Performance Measurements for the Phase I Upgrade of the CMS Pixel Detector
Authors:
M. Dragicevic,
M. Friedl,
J. Hrubec,
H. Steininger,
A. Gädda,
J. Härkönen,
T. Lampén,
P. Luukka,
T. Peltola,
E. Tuominen,
E. Tuovinen,
A. Winkler,
P. Eerola,
T. Tuuva,
G. Baulieu,
G. Boudoul,
L. Caponetto,
C. Combaret,
D. Contardo,
T. Dupasquier,
G. Gallbit,
N. Lumb,
L. Mirabito,
S. Perries,
M. Vander Donckt
, et al. (462 additional authors not shown)
Abstract:
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator…
▽ More
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator thresholds. In this paper, comprehensive test beam studies are presented, which have been conducted to verify the design and to quantify the performance of the new detector assemblies in terms of tracking efficiency and spatial resolution. Under optimal conditions, the tracking efficiency is $99.95\pm0.05\,\%$, while the intrinsic spatial resolutions are $4.80\pm0.25\,μ\mathrm{m}$ and $7.99\pm0.21\,μ\mathrm{m}$ along the $100\,μ\mathrm{m}$ and $150\,μ\mathrm{m}$ pixel pitch, respectively. The findings are compared to a detailed Monte Carlo simulation of the pixel detector and good agreement is found.
△ Less
Submitted 1 June, 2017;
originally announced June 2017.
-
Trap** in irradiated p-on-n silicon sensors at fluences anticipated at the HL-LHC outer tracker
Authors:
W. Adam,
T. Bergauer,
M. Dragicevic,
M. Friedl,
R. Fruehwirth,
M. Hoch,
J. Hrubec,
M. Krammer,
W. Treberspurg,
W. Waltenberger,
S. Alderweireldt,
W. Beaumont,
X. Janssen,
S. Luyckx,
P. Van Mechelen,
N. Van Remortel,
A. Van Spilbeeck,
P. Barria,
C. Caillol,
B. Clerbaux,
G. De Lentdecker,
D. Dobur,
L. Favart,
A. Grebenyuk,
Th. Lenzi
, et al. (663 additional authors not shown)
Abstract:
The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determi…
▽ More
The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determine the charge collection efficiencies separately for electrons and holes drifting through the sensor. The effective trap** rates are extracted by comparing the results to simulation. The electric field is simulated using Synopsys device simulation assuming two effective defects. The generation and drift of charge carriers are simulated in an independent simulation based on PixelAV. The effective trap** rates are determined from the measured charge collection efficiencies and the simulated and measured time-resolved current pulses are compared. The effective trap** rates determined for both electrons and holes are about 50% smaller than those obtained using standard extrapolations of studies at low fluences and suggests an improved tracker performance over initial expectations.
△ Less
Submitted 7 May, 2015;
originally announced May 2015.
-
Distinct cell shapes determine accurate chemotaxis
Authors:
Luke Tweedy,
Börn Meier,
Jürgen Stephan,
Doris Heinrich,
Robert G. Endres
Abstract:
The behaviour of an organism often reflects a strategy for co** with its environment. Such behaviour in higher organisms can often be reduced to a few stereotyped modes of movement due to physiological limitations, but finding such modes in amoeboid cells is more difficult as they lack these constraints. Here, we examine cell shape and movement in starved Dictyostelium amoebae during migration t…
▽ More
The behaviour of an organism often reflects a strategy for co** with its environment. Such behaviour in higher organisms can often be reduced to a few stereotyped modes of movement due to physiological limitations, but finding such modes in amoeboid cells is more difficult as they lack these constraints. Here, we examine cell shape and movement in starved Dictyostelium amoebae during migration toward a chemoattractant in a microfluidic chamber. We show that the incredible variety in amoeboid shape across a population can be reduced to a few modes of variation. Interestingly, cells use distinct modes depending on the applied chemical gradient, with specific cell shapes associated with shallow, difficult-to-sense gradients. Modelling and drug treatment reveals that these behaviours are intrinsically linked with accurate sensing at the physical limit. Since similar behaviours are observed in a diverse range of cell types, we propose that cell shape and behaviour are conserved traits.
△ Less
Submitted 23 August, 2013;
originally announced August 2013.
-
Eigenmodes in the long-time behavior of a coupled spin system measured with nuclear magnetic resonance
Authors:
Benno Meier,
Jonas Kohlrautz,
Jürgen Haase
Abstract:
The many body quantum dynamics of dipolar coupled nuclear spins I = 1/2 on an otherwise isolated cubic lattice are studied with nuclear magnetic resonance (NMR). By increasing the signal-to-noise ratio by two orders of magnitude compared with previous reports for the free induction decay (FID) of 19F in CaF2 we obtain new insight into its long-time behavior. We confirm that the tail of the FID is…
▽ More
The many body quantum dynamics of dipolar coupled nuclear spins I = 1/2 on an otherwise isolated cubic lattice are studied with nuclear magnetic resonance (NMR). By increasing the signal-to-noise ratio by two orders of magnitude compared with previous reports for the free induction decay (FID) of 19F in CaF2 we obtain new insight into its long-time behavior. We confirm that the tail of the FID is an exponentially decaying cosine, but our measurements reveal a second universal decay mode with comparable frequency but twice the decay constant. This result is in agreement with a recent theoretical prediction for the FID in terms of eigenvalues for the time evolution of chaotic many-body quantum systems.
△ Less
Submitted 30 April, 2014; v1 submitted 15 December, 2011;
originally announced December 2011.
-
Radiation hardness of CMS pixel barrel modules
Authors:
T. Rohe,
A. Bean,
W. Erdmann,
H. -C. Kaestli,
S. Khalatyan,
B. Meier,
V. Radicci,
J. Sibille
Abstract:
Pixel detectors are used in the innermost part of the multi purpose experiments at LHC and are therefore exposed to the highest fluences of ionising radiation, which in this part of the detectors consists mainly of charged pions. The radiation hardness of all detector components has thoroughly been tested up to the fluences expected at the LHC. In case of an LHC upgrade, the fluence will be much…
▽ More
Pixel detectors are used in the innermost part of the multi purpose experiments at LHC and are therefore exposed to the highest fluences of ionising radiation, which in this part of the detectors consists mainly of charged pions. The radiation hardness of all detector components has thoroughly been tested up to the fluences expected at the LHC. In case of an LHC upgrade, the fluence will be much higher and it is not yet clear how long the present pixel modules will stay operative in such a harsh environment. The aim of this study was to establish such a limit as a benchmark for other possible detector concepts considered for the upgrade.
As the sensors and the readout chip are the parts most sensitive to radiation damage, samples consisting of a small pixel sensor bump-bonded to a CMS-readout chip (PSI46V2.1) have been irradiated with positive 200 MeV pions at PSI up to 6E14 Neq and with 21 GeV protons at CERN up to 5E15 Neq.
After irradiation the response of the system to beta particles from a Sr-90 source was measured to characterise the charge collection efficiency of the sensor. Radiation induced changes in the readout chip were also measured. The results show that the present pixel modules can be expected to be still operational after a fluence of 2.8E15 Neq. Samples irradiated up to 5E15 Neq still see the beta particles. However, further tests are needed to confirm whether a stable operation with high particle detection efficiency is possible after such a high fluence.
△ Less
Submitted 5 January, 2010;
originally announced January 2010.
-
Mechanical Design and Material Budget of the CMS Barrel Pixel Detector
Authors:
C. Amsler,
K. Bösiger,
V. Chiochia,
W. Erdmann,
K. Gabathuler,
R. Horisberger,
S. König,
D. Kotlinski,
R. Maier,
B. Meier,
Hp. Meyer,
A. Rizzi,
P. Robmann,
S. Scherr,
A. Schmidt,
S. Steiner,
S. Streuli
Abstract:
The Compact Muon Solenoid experiment at the Large Hadron Collider at CERN includes a silicon pixel detector as its innermost component. Its main task is the precise reconstruction of charged particles close to the primary interaction vertex. This paper gives an overview of the mechanical requirements and design choices for the barrel pixel detector. The distribution of material in the detector a…
▽ More
The Compact Muon Solenoid experiment at the Large Hadron Collider at CERN includes a silicon pixel detector as its innermost component. Its main task is the precise reconstruction of charged particles close to the primary interaction vertex. This paper gives an overview of the mechanical requirements and design choices for the barrel pixel detector. The distribution of material in the detector as well as its description in the Monte Carlo simulation are discussed in detail.
△ Less
Submitted 30 April, 2009;
originally announced April 2009.
-
Signal height in silicon pixel detectors irradiated with pions and protons
Authors:
T. Rohe,
J. Acosta,
A. Bean,
S. Dambach,
W. Erdmann,
U. Langenegger,
C. Martin,
B. Meier,
V. Radicci,
J. Sibille,
P. Trueb
Abstract:
Pixel detectors are used in the innermost part of multi purpose experiments at the Large Hadron Collider (LHC) and are therefore exposed to the highest fluences of ionising radiation, which in this part of the detectors consists mainly of charged pions. The radiation hardness of the detectors has thoroughly been tested up to the fluences expected at the LHC. In case of an LHC upgrade the fluence…
▽ More
Pixel detectors are used in the innermost part of multi purpose experiments at the Large Hadron Collider (LHC) and are therefore exposed to the highest fluences of ionising radiation, which in this part of the detectors consists mainly of charged pions. The radiation hardness of the detectors has thoroughly been tested up to the fluences expected at the LHC. In case of an LHC upgrade the fluence will be much higher and it is not yet clear up to which radii the present pixel technology can be used. In order to establish such a limit, pixel sensors of the size of one CMS pixel readout chip (PSI46V2.1) have been bump bonded and irradiated with positive pions up to 6E14 Neq/cm^2 at PSI and with protons up to 5E15 Neq/cm^2. The sensors were taken from production wafers of the CMS barrel pixel detector. They use n-type DOFZ material with a resistance of about 3.7kOhm cm and an n-side read out. As the performance of silicon sensors is limited by trap**, the response to a Sr-90 source was investigated. The highly energetic beta-particles represent a good approximation to minimum ionising particles. The bias dependence of the signal for a wide range of fluences will be presented.
△ Less
Submitted 22 January, 2009;
originally announced January 2009.
-
CMS Barrel Pixel Detector Overview
Authors:
H. Chr. Kästli,
W. Bertl,
W. Erdmann,
K. Gabathuler,
Ch. Hörmann,
R. Horisberger,
S. König,
D. Kotlinski,
B. Meier,
P. Robmann,
T. Rohe,
S. Streuli
Abstract:
The pixel detector is the innermost tracking device of the CMS experiment at the LHC. It is built from two independent sub devices, the pixel barrel and the end disks. The barrel consists of three concentric layers around the beam pipe with mean radii of 4.4, 7.3 and 10.2 cm. There are two end disks on each side of the interaction point at 34.5 cm and 46.5 cm. This article gives an overview of t…
▽ More
The pixel detector is the innermost tracking device of the CMS experiment at the LHC. It is built from two independent sub devices, the pixel barrel and the end disks. The barrel consists of three concentric layers around the beam pipe with mean radii of 4.4, 7.3 and 10.2 cm. There are two end disks on each side of the interaction point at 34.5 cm and 46.5 cm. This article gives an overview of the pixel barrel detector, its mechanical support structure, electronics components, services and its expected performance.
△ Less
Submitted 21 February, 2007;
originally announced February 2007.
-
Building CMS Pixel Barrel Detectur Modules
Authors:
S. König,
Ch. Hörmann,
R. Horisberger,
B. Meier,
T. Rohe,
S. Streuli,
R. Weber,
H. Chr. Kästli,
W. Erdmann
Abstract:
For the barrel part of the CMS pixel tracker about 800 silicon pixel detector modules are required. The modules are bump bonded, assembled and tested at the Paul Scherrer Institute. This article describes the experience acquired during the assembly of the first ~200 modules.
For the barrel part of the CMS pixel tracker about 800 silicon pixel detector modules are required. The modules are bump bonded, assembled and tested at the Paul Scherrer Institute. This article describes the experience acquired during the assembly of the first ~200 modules.
△ Less
Submitted 21 February, 2007;
originally announced February 2007.
-
Design and Performance of the CMS Pixel Detector Readout Chip
Authors:
H. Chr. Kaestli,
M. Barbero,
W. Erdmann,
Ch. Hoermann,
R. Horisberger,
D. Kotlinski,
B. Meier
Abstract:
The readout chip for the CMS pixel detector has to deal with an enormous data rate. On-chip zero suppression is inevitable and hit data must be buffered locally during the latency of the first level trigger. Dead-time must be kept at a minimum. It is dominated by contributions coming from the readout. To keep it low an analog readout scheme has been adopted where pixel addresses are analog coded…
▽ More
The readout chip for the CMS pixel detector has to deal with an enormous data rate. On-chip zero suppression is inevitable and hit data must be buffered locally during the latency of the first level trigger. Dead-time must be kept at a minimum. It is dominated by contributions coming from the readout. To keep it low an analog readout scheme has been adopted where pixel addresses are analog coded. We present the architecture of the final CMS pixel detector readout chip with special emphasis on the analog readout chain. Measurements of its performance are discussed.
△ Less
Submitted 24 February, 2006; v1 submitted 18 November, 2005;
originally announced November 2005.
-
Qualification Procedures of the CMS Pixel Barrel Modules
Authors:
A. Starodumov,
W. Erdmann,
R. Horisberger,
H. Chr. Kaestli,
D. Kotlinski,
U. Langenegger,
B. Meier,
T. Rohe,
P. Trueb
Abstract:
The CMS pixel barrel system will consist of three layers built of about 800 modules. One module contains 66560 readout channels and the full pixel barrel system about 48 million channels. It is mandatory to test each channel for functionality, noise level, trimming mechanism, and bump bonding quality. Different methods to determine the bump bonding yield with electrical measurements have been de…
▽ More
The CMS pixel barrel system will consist of three layers built of about 800 modules. One module contains 66560 readout channels and the full pixel barrel system about 48 million channels. It is mandatory to test each channel for functionality, noise level, trimming mechanism, and bump bonding quality. Different methods to determine the bump bonding yield with electrical measurements have been developed. Measurements of several operational parameters are also included in the qualification procedure. Among them are pixel noise, gains and pedestals. Test and qualification procedures of the pixel barrel modules are described and some results are presented.
△ Less
Submitted 18 October, 2005;
originally announced October 2005.