-
Disorder-induced local strain distribution in Y-substituted TmVO4
Authors:
Yuntian Li,
Mark P. Zic,
Linda Ye,
W. Joe Meese,
Pierre Massat,
Yanbing Zhu,
Rafael M. Fernandes,
Ian R. Fisher
Abstract:
We report an investigation of the effect of substitution of Y for Tm in $Tm_{1-x}Y_xVO4$ via low-temperature heat capacity measurements, with the yttrium content $x$ varying from $0$ to $0.997$. Because the Tm ions support a local quadrupolar (nematic) moment, they act as reporters of the local strain state in the material, with the splitting of the ion's non-Kramers crystal field groundstate prop…
▽ More
We report an investigation of the effect of substitution of Y for Tm in $Tm_{1-x}Y_xVO4$ via low-temperature heat capacity measurements, with the yttrium content $x$ varying from $0$ to $0.997$. Because the Tm ions support a local quadrupolar (nematic) moment, they act as reporters of the local strain state in the material, with the splitting of the ion's non-Kramers crystal field groundstate proportional to the quadrature sum of the in-plane tetragonal symmetry-breaking transverse and longitudinal strains experienced by each ion individually. Analysis of the heat capacity therefore provides detailed insights into the distribution of local strains that arise as a consequence of the chemical substitution. These local strains suppress long-range quadrupole order for $x>0.22$, and result in a broad Schottky-like feature for higher concentrations. Heat capacity data are compared to expectations for a distribution of uncorrelated (random) strains. For dilute Tm concentrations, the heat capacity cannot be accounted for by randomly distributed strains, demonstrating the presence of significant strain correlations between sites. For intermediate Tm concentrations, these correlations must still exist, but the data cannot be distinguished from that which would be obtained from a 2D Gaussian distribution. The cross-over between these limits is discussed in terms of the interplay of key length scales in the substituted material. The central result of this work, that local strains arising from chemical substitution are not uncorrelated, has implications for the range of validity of theoretical models based on random effective fields that are used to describe such chemically substituted materials, particularly when electronic nematic correlations are present.
△ Less
Submitted 26 February, 2024;
originally announced February 2024.
-
Signatures of Z$_3$ Vestigial Potts-nematic order in van der Waals antiferromagnets
Authors:
Zhuoliang Ni,
Daniil S. Antonenko,
W. Joe Meese,
Qi Tian,
Nan Huang,
Amanda V. Haglund,
Matthew Cothrine,
David G. Mandrus,
Rafael M. Fernandes,
Jörn W. F. Venderbos,
Liang Wu
Abstract:
Layered van der Waals magnets have attracted much recent attention as a promising and versatile platform for exploring intrinsic two-dimensional magnetism. Within this broader class, the transition metal phosphorous trichalcogenides $M$P$X_3$ stand out as particularly interesting, as they provide a realization of honeycomb lattice magnetism and are known to display a variety of magnetic ordering p…
▽ More
Layered van der Waals magnets have attracted much recent attention as a promising and versatile platform for exploring intrinsic two-dimensional magnetism. Within this broader class, the transition metal phosphorous trichalcogenides $M$P$X_3$ stand out as particularly interesting, as they provide a realization of honeycomb lattice magnetism and are known to display a variety of magnetic ordering phenomena as well as superconductivity under pressure. One example, found in a number of different materials, is commensurate single-$Q$ zigzag antiferromagnetic order, which spontaneously breaks the spatial threefold $(C_3)$ rotation symmetry of the honeycomb lattice. The breaking of multiple distinct symmetries in the magnetic phase suggests the possibility of a sequence of distinct transitions as a function of temperature, and a resulting intermediate $\mathbb{Z}_3$-nematic phase which exists as a paramagnetic vestige of zigzag magnetic order -- a scenario known as vestigial ordering. Here, we report the observation of key signatures of vestigial Potts-nematic order in rhombohedral FePSe$_3$. By performing linear dichroism imaging measurements -- an ideal probe of rotational symmetry breaking -- we find that the $C_3$ symmetry is already broken above the Néel temperature. We show that these observations are explained by a general Ginzburg-Landau model of vestigial nematic order driven by magnetic fluctuations and coupled to residual strain. An analysis of the domain structure as temperature is lowered and a comparison with zigzag-ordered monoclinic FePS$_3$ reveals a broader applicability of the Ginzburg-Landau model in the presence of external strain, and firmly establishes the $M$P$X_3$ magnets as a new experimental venue for studying the interplay between Potts-nematicity, magnetism and superconductivity.
△ Less
Submitted 14 August, 2023;
originally announced August 2023.
-
On the Nature of Memory and Rejuvenation in Glassy Systems
Authors:
J. Freedberg,
W. Joe Meese,
J. He,
D. L. Schlagel,
E. Dan Dahlberg,
R. L. Orbach
Abstract:
The memory effect in a single crystal spin glass ($\mathrm{Cu}_{0.92}\mathrm{Mn}_{0.08}$) has been measured using $1 \mathrm{Hz}$ ac susceptibility techniques over a reduced temperature range of $0.4 - 0.7 \, T_g$ and a model of the memory effect has been developed. A double-waiting-time protocol is carried out where the spin glass is first allowed to age at a temperature below $T_g$, followed by…
▽ More
The memory effect in a single crystal spin glass ($\mathrm{Cu}_{0.92}\mathrm{Mn}_{0.08}$) has been measured using $1 \mathrm{Hz}$ ac susceptibility techniques over a reduced temperature range of $0.4 - 0.7 \, T_g$ and a model of the memory effect has been developed. A double-waiting-time protocol is carried out where the spin glass is first allowed to age at a temperature below $T_g$, followed by a second aging at a lower temperature after it has fully rejuvenated. The model is based on calculating typical coincidences between the growth of correlated regions at the two temperatures. It accounts for the absolute magnitude of the memory effect as a function of both waiting times and temperatures. The data can be explained by the memory loss being a function of the relative change in the correlated volume at the first waiting temperature because of the growth in the correlations at the second waiting temperature.
△ Less
Submitted 10 July, 2023; v1 submitted 26 May, 2023;
originally announced May 2023.
-
Random-strain-induced correlations in materials with intertwined nematic and magnetic orders
Authors:
W. Joe Meese,
Thomas Vojta,
Rafael M. Fernandes
Abstract:
Electronic nematicity is rarely observed as an isolated instability of a correlated electron system. Instead, in iron pnictides and in certain cuprates and heavy-fermion materials, nematicity is intertwined with an underlying spin-stripe or charge-stripe state. As a result, random strain, ubiquitous in any real crystal, creates both random-field disorder for the nematic degrees of freedom and rand…
▽ More
Electronic nematicity is rarely observed as an isolated instability of a correlated electron system. Instead, in iron pnictides and in certain cuprates and heavy-fermion materials, nematicity is intertwined with an underlying spin-stripe or charge-stripe state. As a result, random strain, ubiquitous in any real crystal, creates both random-field disorder for the nematic degrees of freedom and random-bond disorder for the spin or charge ones. Here, we put forward an Ashkin-Teller model with random Baxter fields to capture the dual role of random strain in nematic systems for which nematicity is a composite order arising from a stripe state. Using Monte Carlo to simulate this $\textit{random Baxter-field model}$, we find not only the expected break-up of the system into nematic domains, but also the emergence of nontrivial disorder-promoted magnetic correlations. Such correlations enhance and tie up the fluctuations associated with the two degenerate magnetic stripe states from which nematicity arises, leaving characteristic signatures in the spatial profile of the magnetic domains, in the configurational space of the spin variables, and in the magnetic noise spectrum. We discuss possible experimental manifestations of these effects in iron-pnictide superconductors. Our work establishes the random Baxter-field model as a more complete alternative to the random-field Ising model to describe complex electronic nematic phenomena in the presence of disorder.
△ Less
Submitted 10 December, 2021;
originally announced December 2021.
-
Tunneling Through the Math Barrier: The Fledgling Physics Student's Field Guide to Essential Mathematics
Authors:
William J. Meese
Abstract:
[Taken from the "README" in the book] My goal with this book is to provide some kind of bridge for mathematics between the high-school-level and college-level for physics students. From my perspective, our job as physicists is to observe and understand the universe around us. Unfortunately our universe happens to be pretty complicated, at least from a mathematical point-of-view. However, a lot of…
▽ More
[Taken from the "README" in the book] My goal with this book is to provide some kind of bridge for mathematics between the high-school-level and college-level for physics students. From my perspective, our job as physicists is to observe and understand the universe around us. Unfortunately our universe happens to be pretty complicated, at least from a mathematical point-of-view. However, a lot of the underlying physics | the underlying set of rules surrounding how things move and behave | is usually not too complicated. Sure, when we couple things together, everything turns disgusting, and we need to turn to really powerful computers or simulators to get a lot accomplished. But the basic rules are not that bad. My hope is to provide enough of a conceptual framework for you to learn to $read$ math as I saw a lot of other physicists do when I started my undergraduate career. I plan to cover some of the topics that tend to trip up a lot of physics students, although I could not cover these exhaustively. When I found that I should have covered more, but could not due to finite time constraints, I left a reference to other work that I think you may find helpful. However, unlike a lot of works, my focus is to help modify your thinking of how math is used, rather than just pummel you with algorithms for you to memorize without giving you the proper context for such algorithms. Whenever you find my explanations long-winded, feel free to proceed through faster. If you get stuck, you are always free to go back and see what I might have referenced before.
△ Less
Submitted 28 May, 2018;
originally announced May 2018.
-
Scaling behavior of columnar structure during physical vapor deposition
Authors:
William J. Meese,
Toh-Ming Lu
Abstract:
The statistical effects of different conditions in physical vapor deposition, such as sputter deposition, have on thin film morphology has long been the subject of interest. One notable effect is that of column development due to differential chamber pressure in the well-known empirical model called Thornton's Structure Zone Model. The model is qualitative in nature and theoretical understanding w…
▽ More
The statistical effects of different conditions in physical vapor deposition, such as sputter deposition, have on thin film morphology has long been the subject of interest. One notable effect is that of column development due to differential chamber pressure in the well-known empirical model called Thornton's Structure Zone Model. The model is qualitative in nature and theoretical understanding with quantitative predictions of the morphology is still lacking due to, in part, the absence of a quantitative description of the incident flux distribution on the growth front. In this work, we propose an incident Gaussian flux model developed from a series of binary hard-sphere collisions and simulate its effects using Monte Carlo methods and a solid-on-solid growth scheme. We also propose an approximate cosine-power distribution for faster Monte Carlo sampling. With this model, it is observed that higher chamber pressures widen the average deposition angle, and similarly increase the growth of column diameters (or lateral correlation length) and the column-to-column separation (film surface wavelength). We treat both the column diameter and the surface wavelength as power laws. It is seen that both the column diameter exponent and the wavelength exponent are very sensitive to changes in pressure for low pressures (0.13 Pa to 0.80 Pa); meanwhile both exponents saturate for higher pressures (0.80 Pa to 6.7 Pa) around a value of 0.6. These predictions will serve as guides to future experiments for quantitative description of film morphology under a wide range of vapor pressure.
△ Less
Submitted 23 February, 2018; v1 submitted 6 November, 2017;
originally announced November 2017.