-
Deep Learning-based Modulation Classification of Practical OFDM Signals for Spectrum Sensing
Authors:
Byungjun Kim,
Christoph Mecklenbräuker,
Peter Gerstoft
Abstract:
In this study, the modulation of symbols on OFDM subcarriers is classified for transmissions following Wi-Fi~6 and 5G downlink specifications. First, our approach estimates the OFDM symbol duration and cyclic prefix length based on the cyclic autocorrelation function. We propose a feature extraction algorithm characterizing the modulation of OFDM signals, which includes removing the effects of a s…
▽ More
In this study, the modulation of symbols on OFDM subcarriers is classified for transmissions following Wi-Fi~6 and 5G downlink specifications. First, our approach estimates the OFDM symbol duration and cyclic prefix length based on the cyclic autocorrelation function. We propose a feature extraction algorithm characterizing the modulation of OFDM signals, which includes removing the effects of a synchronization error. The obtained feature is converted into a 2D histogram of phase and amplitude and this histogram is taken as input to a convolutional neural network (CNN)-based classifier. The classifier does not require prior knowledge of protocol-specific information such as Wi-Fi preamble or resource allocation of 5G physical channels. The classifier's performance, evaluated using synthetic and real-world measured over-the-air (OTA) datasets, achieves a minimum accuracy of 97\% accuracy with OTA data when SNR is above the value required for data transmission.
△ Less
Submitted 28 March, 2024;
originally announced March 2024.
-
Channel Estimation for mmWave MIMO using sub-6 GHz Out-of-Band Information
Authors:
Faruk Pasic,
Markus Hofer,
Mariam Mussbah,
Sebastian Caban,
Stefan Schwarz,
Thomas Zemen,
Christoph F. Mecklenbräuker
Abstract:
Future wireless multiple-input multiple-output (MIMO) communication systems will employ sub-6 GHz and millimeter wave (mmWave) frequency bands working cooperatively. Establishing a MIMO communication link usually relies on estimating channel state information (CSI) which is difficult to acquire at mmWave frequencies due to a low signal-to-noise ratio (SNR). In this paper, we propose three novel me…
▽ More
Future wireless multiple-input multiple-output (MIMO) communication systems will employ sub-6 GHz and millimeter wave (mmWave) frequency bands working cooperatively. Establishing a MIMO communication link usually relies on estimating channel state information (CSI) which is difficult to acquire at mmWave frequencies due to a low signal-to-noise ratio (SNR). In this paper, we propose three novel methods to estimate mmWave MIMO channels using out-of-band information obtained from the sub-6GHz band. We compare the proposed channel estimation methods with a conventional one utilizing only in-band information. Simulation results show that the proposed methods outperform the conventional mmWave channel estimation method in terms of achievable spectral efficiency, especially at low SNR and high K-factor.
△ Less
Submitted 6 July, 2024; v1 submitted 15 November, 2023;
originally announced November 2023.
-
Stationarity Evaluation of High-mobility sub-6 GHz and mmWave non-WSSUS Channels
Authors:
Danilo Radovic,
Faruk Pasic,
Markus Hofer,
Herbert Groll,
Christoph F. Mecklenbräuker,
Thomas Zemen
Abstract:
Analysis and modeling of wireless communication systems are dependent on the validity of the wide-sense stationarity uncorrelated scattering (WSSUS) assumption. However, in high-mobility scenarios, the WSSUS assumption is approximately fulfilled just over a short time period. This paper focuses on the stationarity evaluation of high-mobility multi-band channels. We evaluate the stationarity time,…
▽ More
Analysis and modeling of wireless communication systems are dependent on the validity of the wide-sense stationarity uncorrelated scattering (WSSUS) assumption. However, in high-mobility scenarios, the WSSUS assumption is approximately fulfilled just over a short time period. This paper focuses on the stationarity evaluation of high-mobility multi-band channels. We evaluate the stationarity time, the time over which WSSUS is fulfilled approximately. The investigation is performed over real, measured high-mobility channels for two frequency bands, 2.55 and 25.5 GHz. Furthermore, we demonstrate the influence of the user velocity on the stationarity time. We show that the stationarity time decreases with increased relative velocity between the transmitter and the receiver. Furthermore, we show the similarity of the stationarity regions between sub-6 GHz and mmWave channels. Finally, we demonstrate that the sub-6 GHz channels are characterized by longer stationarity time.
△ Less
Submitted 9 November, 2023; v1 submitted 3 April, 2023;
originally announced April 2023.
-
Robust and Sparse M-Estimation of DOA
Authors:
Christoph F. Mecklenbräuker,
Peter Gerstoft,
Esa Ollila,
Yongsung Park
Abstract:
A robust and sparse Direction of Arrival (DOA) estimator is derived for array data that follows a Complex Elliptically Symmetric (CES) distribution with zero-mean and finite second-order moments. The derivation allows to choose the loss function and four loss functions are discussed in detail: the Gauss loss which is the Maximum-Likelihood (ML) loss for the circularly symmetric complex Gaussian di…
▽ More
A robust and sparse Direction of Arrival (DOA) estimator is derived for array data that follows a Complex Elliptically Symmetric (CES) distribution with zero-mean and finite second-order moments. The derivation allows to choose the loss function and four loss functions are discussed in detail: the Gauss loss which is the Maximum-Likelihood (ML) loss for the circularly symmetric complex Gaussian distribution, the ML-loss for the complex multivariate $t$-distribution (MVT) with $ν$ degrees of freedom, as well as Huber and Tyler loss functions. For Gauss loss, the method reduces to Sparse Bayesian Learning (SBL). The root mean square DOA error of the derived estimators is discussed for Gaussian, MVT, and $ε$-contaminated data. The robust SBL estimators perform well for all cases and nearly identical with classical SBL for Gaussian noise.
△ Less
Submitted 28 July, 2023; v1 submitted 15 January, 2023;
originally announced January 2023.
-
Evaluation of stationarity regions in measured non-WSSUS 60 GHz mmWave V2V channels
Authors:
Danilo Radovic,
Herbert Groll,
Christoph F. Mecklenbräuker
Abstract:
Due to high mobility in multipath propagation environments, vehicle-to-vehicle (V2V) channels are generally time and frequency variant. Therefore, the criteria for wide-sense stationarity (WSS) and uncorrelated scattering (US) are just satisfied over very limited intervals in the time and frequency domains, respectively. We test the validity of these criteria in measured vehicular 60 GHz millimete…
▽ More
Due to high mobility in multipath propagation environments, vehicle-to-vehicle (V2V) channels are generally time and frequency variant. Therefore, the criteria for wide-sense stationarity (WSS) and uncorrelated scattering (US) are just satisfied over very limited intervals in the time and frequency domains, respectively. We test the validity of these criteria in measured vehicular 60 GHz millimeter wave (mmWave) channels, by estimating the local scattering functions (LSFs) from the measured data. Based on the variation of the LSFs, we define time-frequency stationarity regions, over which the WSSUS assumption is assumed to be fulfilled approximately. We analyze and compare both line-of-sight (LOS) and non-LOS (NLOS) V2V communication conditions. We observe large stationarity regions for channels with a dominant LOS connection, without relative movement between the transmitting and receiving vehicle. In the same measured urban driving scenario, modified by eliminating the LOS component in the post-processing, the channel is dominated by specular components reflected from an overpassing vehicle with a relative velocity of 56 km/h. Here, we observe a stationarity bandwidth of 270 MHz. Furthermore, the NLOS channel, dominated by a single strong specular component, shows a relatively large average stationarity time of 16 ms, while the stationarity time for the channel with a rich multipath profile is much shorter, in the order of 5 ms.
△ Less
Submitted 6 October, 2022;
originally announced October 2022.
-
A Hardware-in-the-Loop Evaluation of the Impact of the V2X Channel on the Traffic-Safety Versus Efficiency Trade-offs
Authors:
Alessandro Bazzi,
Thomas Blazek,
Michele Menarini,
Barbara M. Masini,
Alberto Zanella,
Christoph Mecklenbrauker,
Golsa Ghiaasi
Abstract:
Vehicles are increasingly becoming connected and short-range wireless communications promise to introduce a radical change in the drivers' behaviors. Among the main use cases, the intersection management is surely one of those that could mostly impact on both traffic safety and efficiency. In this work, we consider an intersection collision warning application and exploit an hardware-in-the-loop (…
▽ More
Vehicles are increasingly becoming connected and short-range wireless communications promise to introduce a radical change in the drivers' behaviors. Among the main use cases, the intersection management is surely one of those that could mostly impact on both traffic safety and efficiency. In this work, we consider an intersection collision warning application and exploit an hardware-in-the-loop (HIL) platform to verify the impact on the risk of accidents as well as the average time to travel a given distance. Besides including real ITS-G5 compliant message exchanges, the platform also includes a channel emulator with real signals. Results show that the risk of collisions can be drastically reduced, with an overall trade-off between safety and traffic efficiency. At the same time, it is shown that the presence of real channel conditions cannot guarantee the same condition of zero-risk as with ideal channel propagation, remarking the importance of channel conditions and signal processing.
△ Less
Submitted 22 January, 2020;
originally announced January 2020.
-
Oversampled Adaptive Sensing with Random Projections: Analysis and Algorithmic Approaches
Authors:
Ralf R. Müller,
Ali Bereyhi,
Christoph F. Mecklenbräuker
Abstract:
Oversampled adaptive sensing (OAS) is a recently proposed Bayesian framework which sequentially adapts the sensing basis. In OAS, estimation quality is, in each step, measured by conditional mean squared errors (MSEs), and the basis for the next sensing step is adapted accordingly. For given average sensing time, OAS reduces the MSE compared to non-adaptive schemes, when the signal is sparse. This…
▽ More
Oversampled adaptive sensing (OAS) is a recently proposed Bayesian framework which sequentially adapts the sensing basis. In OAS, estimation quality is, in each step, measured by conditional mean squared errors (MSEs), and the basis for the next sensing step is adapted accordingly. For given average sensing time, OAS reduces the MSE compared to non-adaptive schemes, when the signal is sparse. This paper studies the asymptotic performance of Bayesian OAS, for unitarily invariant random projections. For sparse signals, it is shown that OAS with Bayesian recovery and hard adaptation significantly outperforms the minimum MSE bound for non-adaptive sensing. To address implementational aspects, two computationally tractable algorithms are proposed, and their performances are compared against the state-of-the-art non-adaptive algorithms via numerical simulations. Investigations depict that these low-complexity OAS algorithms, despite their suboptimality, outperform well-known non-adaptive schemes for sparse recovery, such as LASSO, with rather small oversampling factors. This gain grows, as the compression rate increases.
△ Less
Submitted 15 November, 2018;
originally announced November 2018.
-
Better than Rician: Modelling millimetre wave channels as Two-Wave with Diffuse Power
Authors:
Erich Zöchmann,
Sebastian Caban,
Christoph F. Mecklenbräuker,
Stefan Pratschner,
Martin Lerch,
Stefan Schwarz,
Markus Rupp
Abstract:
This contribution provides experimental evidence for the two-wave with diffuse power (TWDP) fading model. We have conducted two indoor millimetre wave measurement campaigns with directive horn antennas at both link ends. One horn antenna is mounted in a corner of our laboratory, while the other is steerable and scans azimuth and elevation. Our first measurement campaign is based on scalar network…
▽ More
This contribution provides experimental evidence for the two-wave with diffuse power (TWDP) fading model. We have conducted two indoor millimetre wave measurement campaigns with directive horn antennas at both link ends. One horn antenna is mounted in a corner of our laboratory, while the other is steerable and scans azimuth and elevation. Our first measurement campaign is based on scalar network analysis with 7 GHz of bandwidth. Our second measurement campaign obtains magnitude and phase information, additionally sampled directionally at several positions in space. %This second measurement campaign is limited to 2 GHz bandwidth. We apply Akaike's information criterion to decide whether Rician fading sufficiently explains the data or the generalized TWDP fading model is necessary. Our results indicate that the TWDP fading hypothesis is favoured over Rician fading in situations where the steerable antenna is pointing towards reflecting objects or is slightly misaligned at line-of-sight. We demonstrate TWDP fading in several different domains, namely, frequency, space, and time.
△ Less
Submitted 10 April, 2018;
originally announced April 2018.
-
Oversampled Adaptive Sensing
Authors:
Ralf R. Müller,
Ali Bereyhi,
Christoph F. Mecklenbräuker
Abstract:
We develop a Bayesian framework for sensing which adapts the sensing time and/or basis functions to the instantaneous sensing quality measured in terms of the expected posterior mean-squared error. For sparse Gaussian sources a significant reduction in average sensing time and/or mean-squared error is achieved in comparison to non-adaptive sensing. For compression ratio 3, a sparse 10% Gaussian so…
▽ More
We develop a Bayesian framework for sensing which adapts the sensing time and/or basis functions to the instantaneous sensing quality measured in terms of the expected posterior mean-squared error. For sparse Gaussian sources a significant reduction in average sensing time and/or mean-squared error is achieved in comparison to non-adaptive sensing. For compression ratio 3, a sparse 10% Gaussian source and equal average sensing times, the proposed method gains about 2 dB over the performance bound of optimum compressive sensing, about 3 dB over non-adaptive 3-fold oversampled orthogonal sensing and about 6 to 7 dB to LASSO-based recovery schemes while enjoying polynomial time complexity.
We utilize that in the presence of Gaussian noise the mean-squared error conditioned on the current observation is proportional to the derivative of the conditional mean estimate with respect to this observation.
△ Less
Submitted 8 February, 2018;
originally announced February 2018.
-
Sparse Bayesian Learning for DOA Estimation in Heteroscedastic Noise
Authors:
Peter Gerstoft,
Santosh Nannuru,
Christoph F. Mecklenbräuker,
Geert Leus
Abstract:
The paper considers direction of arrival (DOA) estimation from long-term observations in a noisy environment. In such an environment the noise source might evolve, causing the stationary models to fail. Therefore a heteroscedastic Gaussian noise model is introduced where the variance can vary across observations and sensors. The source amplitudes are assumed independent zero-mean complex Gaussian…
▽ More
The paper considers direction of arrival (DOA) estimation from long-term observations in a noisy environment. In such an environment the noise source might evolve, causing the stationary models to fail. Therefore a heteroscedastic Gaussian noise model is introduced where the variance can vary across observations and sensors. The source amplitudes are assumed independent zero-mean complex Gaussian distributed with unknown variances (i.e. the source powers), inspiring stochastic maximum likelihood DOA estimation. The DOAs of plane waves are estimated from multi-snapshot sensor array data using sparse Bayesian learning (SBL) where the noise is estimated across both sensors and snapshots. This SBL approach is more flexible and performs better than high-resolution methods since they cannot estimate the heteroscedastic noise process. An alternative to SBL is simple data normalization, whereby only the phase across the array is utilized. Simulations demonstrate that taking the heteroscedastic noise into account improves DOA estimation.
△ Less
Submitted 8 November, 2017;
originally announced November 2017.
-
Angle-dependent reflectivity of twill-weave carbon fibre reinforced polymer for millimetre waves
Authors:
Gerald Artner,
Erich Zöchmann,
Stefan Pratschner,
Martin Lerch,
Markus Rupp,
C. F. Mecklenbräuker
Abstract:
Twill-weave carbon fibre reinforced polymer is measured as reflector material for electromagnetic waves at 60 GHz. The reflectivity at millimetre wavelength shows a predominant direction, which coincides with the diagonal pattern of the twill's top layer. In the remaining directions the investigated 2/2 twill-weave composite's reflectivity is almost isotropic.
Twill-weave carbon fibre reinforced polymer is measured as reflector material for electromagnetic waves at 60 GHz. The reflectivity at millimetre wavelength shows a predominant direction, which coincides with the diagonal pattern of the twill's top layer. In the remaining directions the investigated 2/2 twill-weave composite's reflectivity is almost isotropic.
△ Less
Submitted 9 November, 2017;
originally announced November 2017.
-
Sparse Bayesian learning with uncertainty models and multiple dictionaries
Authors:
Santosh Nannuru,
Kay L. Gemba,
Peter Gerstoft,
William S. Hodgkiss,
Christoph Mecklenbräuker
Abstract:
Sparse Bayesian learning (SBL) has emerged as a fast and competitive method to perform sparse processing. The SBL algorithm, which is developed using a Bayesian framework, approximately solves a non-convex optimization problem using fixed point updates. It provides comparable performance and is significantly faster than convex optimization techniques used in sparse processing. We propose a signal…
▽ More
Sparse Bayesian learning (SBL) has emerged as a fast and competitive method to perform sparse processing. The SBL algorithm, which is developed using a Bayesian framework, approximately solves a non-convex optimization problem using fixed point updates. It provides comparable performance and is significantly faster than convex optimization techniques used in sparse processing. We propose a signal model which accounts for dictionary mismatch and the presence of errors in the weight vector at low signal-to-noise ratios. A fixed point update equation is derived which incorporates the statistics of mismatch and weight errors. We also process observations from multiple dictionaries. Noise variances are estimated using stochastic maximum likelihood. The derived update equations are studied quantitatively using beamforming simulations applied to direction-of-arrival (DoA). Performance of SBL using single- and multi-frequency observations, and in the presence of aliasing, is evaluated. SwellEx-96 experimental data demonstrates qualitatively the advantages of SBL.
△ Less
Submitted 26 June, 2017; v1 submitted 3 April, 2017;
originally announced April 2017.
-
Multi Snapshot Sparse Bayesian Learning for DOA Estimation
Authors:
Peter Gerstoft,
Christoph F. Mecklenbräuker,
Angeliki Xenaki
Abstract:
The directions of arrival (DOA) of plane waves are estimated from multi-snapshot sensor array data using Sparse Bayesian Learning (SBL). The prior source amplitudes is assumed independent zero-mean complex Gaussian distributed with hyperparameters the unknown variances (i.e. the source powers). For a complex Gaussian likelihood with hyperparameter the unknown noise variance, the corresponding Gaus…
▽ More
The directions of arrival (DOA) of plane waves are estimated from multi-snapshot sensor array data using Sparse Bayesian Learning (SBL). The prior source amplitudes is assumed independent zero-mean complex Gaussian distributed with hyperparameters the unknown variances (i.e. the source powers). For a complex Gaussian likelihood with hyperparameter the unknown noise variance, the corresponding Gaussian posterior distribution is derived. For a given number of DOAs, the hyperparameters are automatically selected by maximizing the evidence and promote sparse DOA estimates. The SBL scheme for DOA estimation is discussed and evaluated competitively against LASSO ($\ell_1$-regularization), conventional beamforming, and MUSIC
△ Less
Submitted 29 February, 2016;
originally announced February 2016.
-
Multiple and single snapshot compressive beamforming
Authors:
Peter Gerstoft,
Angeliki Xenaki,
Christoph F. Mecklenbräuker
Abstract:
For a sound field observed on a sensor array, compressive sensing (CS) reconstructs the direction-of-arrival (DOA) of multiple sources using a sparsity constraint. The DOA estimation is posed as an underdetermined problem by expressing the acoustic pressure at each sensor as a phase-lagged superposition of source amplitudes at all hypothetical DOAs. Regularizing with an $\ell_1$-norm constraint re…
▽ More
For a sound field observed on a sensor array, compressive sensing (CS) reconstructs the direction-of-arrival (DOA) of multiple sources using a sparsity constraint. The DOA estimation is posed as an underdetermined problem by expressing the acoustic pressure at each sensor as a phase-lagged superposition of source amplitudes at all hypothetical DOAs. Regularizing with an $\ell_1$-norm constraint renders the problem solvable with convex optimization, and promoting sparsity gives high-resolution DOA maps. Here, the sparse source distribution is derived using maximum a posteriori (MAP) estimates for both single and multiple snapshots. CS does not require inversion of the data covariance matrix and thus works well even for a single snapshot where it gives higher resolution than conventional beamforming. For multiple snapshots, CS outperforms conventional high-resolution methods, even with coherent arrivals and at low signal-to-noise ratio. The superior resolution of CS is demonstrated with vertical array data from the SWellEx96 experiment for coherent multi-paths.
△ Less
Submitted 21 August, 2015; v1 submitted 8 March, 2015;
originally announced March 2015.
-
Using the LASSO's Dual for Regularization in Sparse Signal Reconstruction from Array Data
Authors:
Christoph F. Mecklenbräuker,
Peter Gerstoft,
Erich Zöchmann
Abstract:
Waves from a sparse set of source hidden in additive noise are observed by a sensor array. We treat the estimation of the sparse set of sources as a generalized complex-valued LASSO problem. The corresponding dual problem is formulated and it is shown that the dual solution is useful for selecting the regularization parameter of the LASSO when the number of sources is given. The solution path of t…
▽ More
Waves from a sparse set of source hidden in additive noise are observed by a sensor array. We treat the estimation of the sparse set of sources as a generalized complex-valued LASSO problem. The corresponding dual problem is formulated and it is shown that the dual solution is useful for selecting the regularization parameter of the LASSO when the number of sources is given. The solution path of the complex-valued LASSO is analyzed. For a given number of sources, the corresponding regularization parameter is determined by an order-recursive algorithm and two iterative algorithms that are based on a further approximation. Using this regularization parameter, the DOAs of all sources are estimated.
△ Less
Submitted 2 September, 2015; v1 submitted 16 February, 2015;
originally announced February 2015.
-
Simulation and Measurement Based Vehicle-to-Vehicle Channel Characterization: Accuracy and Constraint Analysis
Authors:
Taimoor Abbas,
Jörg Nuckelt,
Thomas Kürner,
Thomas Zemen,
Christoph Mecklenbräuker,
Fredrik Tufvesson
Abstract:
In this paper, a deterministic channel model for vehicle-to-vehicle (V2V) communication, is compared against channel measurement data collected during a V2V channel measurement campaign using a channel sounder. Channel metrics such as channel gain, delay and Doppler spreads, eigenvalue decomposition and antenna correlations are derived from the ray tracing (RT) simulations as well as from the meas…
▽ More
In this paper, a deterministic channel model for vehicle-to-vehicle (V2V) communication, is compared against channel measurement data collected during a V2V channel measurement campaign using a channel sounder. Channel metrics such as channel gain, delay and Doppler spreads, eigenvalue decomposition and antenna correlations are derived from the ray tracing (RT) simulations as well as from the measurement data obtained from two different measurements in an urban four-way intersection scenario. The channel metrics are compared separately for line-of-sight (LOS) and non-LOS (NLOS) situation. Most power contributions arise from the LOS component (if present) as well as from multipaths with single bounce reflections. Measurement and simulation results show a very good agreement in the presence of LOS, as most of the received power is contributed from the LOS component. In NLOS, the difference is large because the ray tracer is unable to capture some of the multi bounced propagation paths that are present in the measurements. Despite the limitations of the ray-based propagation model identified in this work, the model is suitable to characterize the channel properties in a sufficient manner.
△ Less
Submitted 15 October, 2014;
originally announced October 2014.
-
Time- and Frequency-Varying $K$-Factor of Non-Stationary Vehicular Channels for Safety Relevant Scenarios
Authors:
Laura Bernadó,
Thomas Zemen,
Fredrik Tufvesson,
Andreas F. Molisch,
Christoph F. Mecklenbräuker
Abstract:
Vehicular communication channels are characterized by a non-stationary time- and frequency-selective fading process due to fast changes in the environment. We characterize the distribution of the envelope of the first delay bin in vehicle-to-vehicle channels by means of its Rician $K$-factor. We analyze the time-frequency variability of this channel parameter using vehicular channel measurements a…
▽ More
Vehicular communication channels are characterized by a non-stationary time- and frequency-selective fading process due to fast changes in the environment. We characterize the distribution of the envelope of the first delay bin in vehicle-to-vehicle channels by means of its Rician $K$-factor. We analyze the time-frequency variability of this channel parameter using vehicular channel measurements at 5.6 GHz with a bandwidth of 240 MHz for safety-relevant scenarios in intelligent transportation systems (ITS). This data enables a frequency-variability analysis from an IEEE 802.11p system point of view, which uses 10 MHz channels. We show that the small-scale fading of the envelope of the first delay bin is Ricean distributed with a varying $K$-factor. The later delay bins are Rayleigh distributed. We demonstrate that the $K$-factor cannot be assumed to be constant in time and frequency. The causes of these variations are the frequency-varying antenna radiation patterns as well as the time-varying number of active scatterers, and the effects of vegetation. We also present a simple but accurate bi-modal Gaussian mixture model, that allows to capture the $K$-factor variability in time for safety-relevant ITS scenarios.
△ Less
Submitted 25 April, 2014; v1 submitted 17 June, 2013;
originally announced June 2013.
-
Delay and Doppler Spreads of Non-Stationary Vehicular Channels for Safety Relevant Scenarios
Authors:
Laura Bernadó,
Thomas Zemen,
Fredrik Tufvesson,
Andreas F. Molisch,
Christoph F. Mecklenbräuker
Abstract:
Vehicular communication channels are characterized by a non-stationary time- and frequency-selective fading process due to rapid changes in the environment. The non-stationary fading process can be characterized by assuming local stationarity for a region with finite extent in time and frequency. For this finite region the wide-sense stationarity and uncorrelated-scattering (WSSUS) assumption hold…
▽ More
Vehicular communication channels are characterized by a non-stationary time- and frequency-selective fading process due to rapid changes in the environment. The non-stationary fading process can be characterized by assuming local stationarity for a region with finite extent in time and frequency. For this finite region the wide-sense stationarity and uncorrelated-scattering (WSSUS) assumption holds approximately and we are able to calculate a time and frequency dependent local scattering function (LSF). In this paper, we estimate the LSF from a large set of measurements collected in the DRIVEWAY'09 measurement campaign, which focuses on scenarios for intelligent transportation systems. We then obtain the time-frequency-varying power delay profile (PDP) and the time-frequency-varying Doppler power spectral density (DSD) from the LSF. Based on the PDP and the DSD, we analyze the time-frequency-varying root mean square (RMS) delay spread and the RMS Doppler spread. We show that the distribution of these channel parameters follows a bi-modal Gaussian mixture distribution. High RMS delay spread values are observed in situations with rich scattering, while high RMS Doppler spreads are obtained in drive-by scenarios.
△ Less
Submitted 15 May, 2013;
originally announced May 2013.