-
Inferring the CO2 Abundance in Comet 45P/Honda-Mrkos-Pajdušáková from [O I] Observations: Implications for the Source of Icy Grains in Cometary Comae
Authors:
Mikayla R. Huffman,
Adam J. McKay,
Anita L. Cochran
Abstract:
The study of cometary composition is important for understanding our solar system's early evolutionary processes. Carbon dioxide (CO2) is a common hypervolatile in comets that can drive activity but is more difficult to study than other hypervolatiles due to severe telluric absorption. CO2 can only be directly observed from space-borne assets. Therefore, a proxy is needed to measure CO2 abundances…
▽ More
The study of cometary composition is important for understanding our solar system's early evolutionary processes. Carbon dioxide (CO2) is a common hypervolatile in comets that can drive activity but is more difficult to study than other hypervolatiles due to severe telluric absorption. CO2 can only be directly observed from space-borne assets. Therefore, a proxy is needed to measure CO2 abundances in comets using ground-based observations. The flux ratio of the [O I] 5577 A line to the sum of the [O I] 6300 A and [O I] 6364 A lines (hereafter referred to as the [O I] line ratio) has, with some success, been used in the past as such a proxy. We present an [O I] line ratio analysis of comet 45P/Honda-Mrkos-Pajdušáková (HMP), using data obtained with the Tull Coudé Spectrograph on the 2.7-meter Harlan J. Smith telescope at McDonald Observatory, taken from UT February 21-23, 2017 when the comet was at heliocentric distances of 1.12-1.15 AU. HMP is a hyperactive Jupiter family comet (JFC). Icy grains driven out by CO2 sublimation have been proposed as a driver of hyperactivity, but the CO2 abundance of HMP has not been measured. From our [O I] line ratio measurements, we find a CO2/H2O ratio for HMP of 22.9 +/- 1.4%. We compare the CO2/H2O ratios to the active fractions of the nine comets (including HMP) in the literature that have data for both values. We find no correlation. These findings imply that CO2 sublimation driving out icy grains is not the only factor influencing active fractions for cometary nuclei.
△ Less
Submitted 1 January, 2024;
originally announced January 2024.
-
Comparing SCUBA-2 and ALMA Selections of Faint DSFGs in Abell 2744
Authors:
S. J. McKay,
A. J. Barger,
L. L. Cowie
Abstract:
We make a comparison of deep SCUBA-2 450 $μ$m and 850 $μ$m imaging on the massive lensing cluster field Abell 2744 with Atacama Large Millimeter/submillimeter Array (ALMA) 1.2 mm data. Our primary goal is to assess how effective the wider-field SCUBA-2 sample, in combination with red JWST priors, is for finding faint dusty star-forming galaxies (DSFGs) compared to the much more expensive mosaicked…
▽ More
We make a comparison of deep SCUBA-2 450 $μ$m and 850 $μ$m imaging on the massive lensing cluster field Abell 2744 with Atacama Large Millimeter/submillimeter Array (ALMA) 1.2 mm data. Our primary goal is to assess how effective the wider-field SCUBA-2 sample, in combination with red JWST priors, is for finding faint dusty star-forming galaxies (DSFGs) compared to the much more expensive mosaicked ALMA observations. We cross-match our previously reported direct ($>5σ$) SCUBA-2 sample and red JWST NIRCam prior-selected ($>3σ$) SCUBA-2 sample to direct ALMA sources from the DUALZ survey. We find that roughly 95% are confirmed by ALMA. The red priors also allow us to probe deeper in the ALMA image. Next, by measuring the 450 $μ$m and 850 $μ$m properties of the full ALMA sample, we show that 46/69 of the ALMA sources are detected at 850 $μ$m and 24/69 are detected at 450 $μ$m in the SCUBA-2 images, with a total detection fraction of nearly 75%. All of the robust ($>5σ$) ALMA sources that are not detected in at least one SCUBA-2 band lie at 1.2 mm fluxes $\lesssim$ 0.6 mJy and are undetected primarily due to the higher SCUBA-2 flux limits. We also find that the SCUBA-2 detection fraction drops slightly beyond $z=3$, which we attribute to the increasing 1.2 mm to 850 $μ$m and 1.2 mm to 450 $μ$m flux ratios combined with the ALMA selection. The results emphasize the power of combining SCUBA-2 data with JWST colors to map the faint DSFG population.
△ Less
Submitted 15 January, 2024; v1 submitted 28 November, 2023;
originally announced November 2023.
-
The effect of spatial sampling on the resolution of the magnetostatic inverse problem
Authors:
Jussi Nurminen,
Andrey Zhdanov,
Wan ** Yeo,
Joonas Iivanainen,
Julia Stephen,
Amir Borna,
Jim McKay,
Peter D. D. Schwindt,
Samu Taulu
Abstract:
In magnetoencephalography, linear minimum norm inverse methods are commonly employed when a solution with minimal a priori assumptions is desirable. These methods typically produce spatially extended inverse solutions, even when the generating source is focal. Various reasons have been proposed for this effect, including intrisic properties of the minimum norm solution, effects of regularization,…
▽ More
In magnetoencephalography, linear minimum norm inverse methods are commonly employed when a solution with minimal a priori assumptions is desirable. These methods typically produce spatially extended inverse solutions, even when the generating source is focal. Various reasons have been proposed for this effect, including intrisic properties of the minimum norm solution, effects of regularization, noise, and limitations of the sensor array. In this work, we express the lead field in terms of the magnetostatic multipole expansion and develop the minimum-norm inverse in the multipole domain. We demonstrate the close relationship between numerical regularization and explicit suppression of spatial frequencies of the magnetic field. We show that the spatial sampling capabilities of the sensor array and regularization together determine the resolution of the inverse solution. For the purposes of stabilizing the inverse estimate, we propose the multipole transformation of the lead field as an alternative or complementary means to purely numerical regularization.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
Near-field thermal emission from metasurfaces constructed of SiC ellipsoidal particles
Authors:
Lindsay P. Walter,
Joseph C. McKay,
Bart Raeymaekers,
Mathieu Francoeur
Abstract:
We model near-field thermal emission from metasurfaces structured as two-dimensional arrays of ellipsoidal SiC particles. The modeling approach is developed from fluctuational electrodynamics and is applicable to systems of ellipsoidal particles within the dipole limit. In all simulations, the radial lengths of particles are restricted to the range of 10 to 100 nm, and interparticle spacing is con…
▽ More
We model near-field thermal emission from metasurfaces structured as two-dimensional arrays of ellipsoidal SiC particles. The modeling approach is developed from fluctuational electrodynamics and is applicable to systems of ellipsoidal particles within the dipole limit. In all simulations, the radial lengths of particles are restricted to the range of 10 to 100 nm, and interparticle spacing is constrained to at least three times the particle characteristic length. The orientation and dimensions of constituent ellipsoidal particles are varied to tune localized surface phonon resonances and control the near-field energy density above metasurfaces. Results show that particle orientation can be used to regulate the relative magnitude of resonances in the energy density and particle dimensions may be changed to adjust the frequency of these resonances within the Reststrahlen band. Metasurfaces constructed from particles with randomized dimensions display comparatively broadband thermal emission rather than the three distinct resonances seen in metasurfaces made with ellipsoidal particles of equivalent dimensions. When the interparticle spacing in a metasurface exceeds about three times the particle characteristic length, the spectral energy density above the metasurface is dominated by individual particle self-interaction and can be approximated as a linear combination of single-particle spectra. When interparticle spacing is at the lower limit of three times the characteristic length, however, multiparticle interaction effects increase, and the spectral energy density above a metasurface deviates from that of single particles. This work provides guidance for designing all-dielectric, particle-based metasurfaces with desired near-field thermal emission spectra, such as thermal switches.
△ Less
Submitted 26 May, 2023;
originally announced May 2023.
-
Dust Properties of 870 Micron Selected Galaxies in the GOODS-S
Authors:
S. J. McKay,
A. J. Barger,
L. L. Cowie,
F. E. Bauer,
M. J. Nicandro Rosenthal
Abstract:
We analyze the dust properties of 57 870 $μ$m selected dusty star-forming galaxies in the GOODS-S using new deep ALMA 1.2 mm, 2 mm, and 3 mm continuum imaging together with other far-infrared through millimeter data. We fit the spectral energy distributions (SEDs) with optically thin modified blackbodies to constrain the emissivity indices and effective dust temperatures, finding a median emissivi…
▽ More
We analyze the dust properties of 57 870 $μ$m selected dusty star-forming galaxies in the GOODS-S using new deep ALMA 1.2 mm, 2 mm, and 3 mm continuum imaging together with other far-infrared through millimeter data. We fit the spectral energy distributions (SEDs) with optically thin modified blackbodies to constrain the emissivity indices and effective dust temperatures, finding a median emissivity index of $β= 1.78^{+0.43}_{-0.25}$ and a median temperature of $T_d = 33.6^{+12.1}_{-5.4}$ K. We observe a negative correlation between $β$ and $T_d$. By testing several SED models, we determine that the derived emissivity indices can be influenced by opacity assumptions. Our temperature measurements are consistent with no evolution in dust temperature with redshift.
△ Less
Submitted 10 May, 2023;
originally announced May 2023.
-
Molecular Outgassing in Centaur 29P/Schwassmann-Wachmann 1 During Its Exceptional 2021 Outburst: Coordinated Multi-Wavelength Observations Using nFLASH at APEX and iSHELL at the NASA-IRTF
Authors:
Nathan X. Roth,
Stefanie N. Milam,
Michael A. DiSanti,
Geronimo L. Villanueva,
Sara Faggi,
Boncho P. Bonev,
Martin A. Cordiner,
Anthony J. Remijan,
Dominique Bockelée-Morvan,
Nicolas Biver,
Jacques Crovisier,
Dariusz C. Lis,
Steven B. Charnley,
Emmanuel Jehin,
Eva. S. Wirström,
Adam J. McKay
Abstract:
The extraordinary 2021 September-October outburst of Centaur 29P/Schwassmann-Wachmann 1 afforded an opportunity to test the composition of primitive Kuiper disk material at high sensitivity. We conducted nearly simultaneous multi-wavelength spectroscopic observations of 29P/Schwassmann-Wachmann 1 using iSHELL at the NASA Infrared Telescope Facility and nFLASH at the Atacama Pathfinder EXperiment (…
▽ More
The extraordinary 2021 September-October outburst of Centaur 29P/Schwassmann-Wachmann 1 afforded an opportunity to test the composition of primitive Kuiper disk material at high sensitivity. We conducted nearly simultaneous multi-wavelength spectroscopic observations of 29P/Schwassmann-Wachmann 1 using iSHELL at the NASA Infrared Telescope Facility and nFLASH at the Atacama Pathfinder EXperiment (APEX) on 2021 October 6, with follow-up APEX/nFLASH observations on 2021 October 7 and 2022 April 3. This coordinated campaign between near-infrared and radio wavelengths enabled us to sample molecular emission from a wealth of coma molecules and to perform measurements that cannot be accomplished with either wavelength alone. We securely detected CO emission on all dates with both facilities, including velocity-resolved spectra of the CO (J=2-1) transition with APEX/nFLASH and multiple CO (v=1-0) rovibrational transitions with IRTF/iSHELL. We report rotational temperatures, coma kinematics, and production rates for CO and stringent (3-sigma) upper limits on abundance ratios relative to CO for CH4, C2H6, CH3OH, H2CO, CS, and OCS. Our upper limits for CS/CO and OCS/CO represent their first values in the literature for this Centaur. Upper limits for CH4, C2H6, CH3OH, and H2CO are the most stringent reported to date, and are most similar to values found in ultra CO-rich Oort cloud comet C/2016 R2 (PanSTARRS), which may have implications for how ices are preserved in cometary nuclei. We demonstrate the superb synergy of coordinated radio and near-infrared measurements, and advocate for future small body studies that jointly leverage the capabilities of each wavelength.
△ Less
Submitted 27 April, 2023;
originally announced April 2023.
-
Effects of head modeling errors on the spatial frequency representation of MEG
Authors:
Wan-** Yeo,
Eric Larson,
Joonas Iivanainen,
Amir Borna,
Jim McKay,
Julia Stephen,
Peter Schwindt,
Samu Taulu
Abstract:
Optically-pumped magnetometers (OPM) -- next-generation magnetoencephalography (MEG) sensors -- may be placed directly on the head, unlike the more commonly used superconducting quantum interference device (SQUID) sensors, which must be placed a few centimeters away. This allows for signals of higher spatial resolution to be captured, resulting in potentially more accurate source localization. In…
▽ More
Optically-pumped magnetometers (OPM) -- next-generation magnetoencephalography (MEG) sensors -- may be placed directly on the head, unlike the more commonly used superconducting quantum interference device (SQUID) sensors, which must be placed a few centimeters away. This allows for signals of higher spatial resolution to be captured, resulting in potentially more accurate source localization. In this paper, we show that in the noiseless and high signal-to-noise ratio (SNR) case of approximately $\geq 6$ dB, inaccuracies in boundary element method (BEM) head conductor models (or equivalently, inaccurate volume current models) lead to increased signal and equivalent current dipole (ECD) source localization inaccuracies when sensor arrays are placed closer to the head. This is true especially in the case of deep and superficial sources where volume current contributions are high. In the noisy case however, the higher SNR for closer sensor arrays allows for an improved ECD fit and outweighs the effects of head geometry inaccuracies. This calls for an increase in emphasis in head modeling to reduce inverse modeling errors, especially as the field of MEG strives for closer sensor arrays and cleaner signals. An analytical form to obtain the magnetic field errors for small perturbations in the BEM head geometry is also provided.
△ Less
Submitted 19 August, 2022;
originally announced August 2022.
-
Sensitivity analysis for constructing optimal regimes in the presence of treatment non-compliance
Authors:
Cuong T. Pham,
Kevin G. Lynch,
James R. McKay,
Ashkan Ertefaie
Abstract:
The current body of research on develo** optimal treatment strategies often places emphasis on intention-to-treat analyses, which fail to take into account the compliance behavior of individuals. Methods based on instrumental variables have been developed to determine optimal treatment strategies in the presence of endogeneity. However, these existing methods are not applicable when there are tw…
▽ More
The current body of research on develo** optimal treatment strategies often places emphasis on intention-to-treat analyses, which fail to take into account the compliance behavior of individuals. Methods based on instrumental variables have been developed to determine optimal treatment strategies in the presence of endogeneity. However, these existing methods are not applicable when there are two active treatment options and the average causal effects of the treatments cannot be identified using a binary instrument. In order to address this limitation, we present a procedure that can identify an optimal treatment strategy and the corresponding value function as a function of a vector of sensitivity parameters. Additionally, we derive the canonical gradient of the target parameter and propose a multiply robust classification-based estimator for the optimal treatment strategy. Through simulations, we demonstrate the practical need for and usefulness of our proposed method. We apply our method to a randomized trial on Adaptive Treatment for Alcohol and Cocaine Dependence.
△ Less
Submitted 20 February, 2024; v1 submitted 18 July, 2022;
originally announced July 2022.
-
Calibration and localization of optically pumped magnetometers using electromagnetic coils
Authors:
Joonas Iivanainen,
Amir Borna,
Rasmus Zetter,
Tony R. Carter,
Julia M. Stephen,
Jim McKay,
Lauri Parkkonen,
Samu Taulu,
Peter D. D. Schwindt
Abstract:
In this paper, we propose a method to estimate the position, orientation and gain of a magnetic field sensor using a set of (large) electromagnetic coils. We apply the method for calibrating an array of optically pumped magnetometers (OPMs) for magnetoencephalography (MEG). We first measure the magnetic fields of the coils at multiple known positions using a well-calibrated triaxial magnetometer a…
▽ More
In this paper, we propose a method to estimate the position, orientation and gain of a magnetic field sensor using a set of (large) electromagnetic coils. We apply the method for calibrating an array of optically pumped magnetometers (OPMs) for magnetoencephalography (MEG). We first measure the magnetic fields of the coils at multiple known positions using a well-calibrated triaxial magnetometer and model these discreetly sampled fields using vector-spherical harmonics (VSH) functions. We then localize and calibrate a sensor by minimizing the sum of squared errors between the model signals and the sensor responses to the coil fields. We show that by using homogeneous and first-order gradient fields, the sensor parameters (gain, position, and orientation) can be obtained from a set of linear equations with pseudo-inverses of two matrices. By determining the coil currents based on the VSH models, the coil fields can approximate these low-order field components, yielding computationally simple initial estimates of the sensor parameters. As a first test of the method, we placed a fluxgate magnetometer at multiple positions and estimated the RMS position, orientation, and gain errors of the method to be 1.0 mm, 0.2° and 0.8%, respectively. Last, we calibrated a 48-channel OPM array. The accuracy of the OPM calibration was tested by using the OPM array to localize magnetic dipoles in a phantom, which resulted in an average position error of 3.3 mm. The results demonstrate the feasibility of using electromagnetic coils to calibrate and localize OPMs for MEG.
△ Less
Submitted 9 March, 2022;
originally announced March 2022.
-
Towards Multi-Objective Statistically Fair Federated Learning
Authors:
Ninareh Mehrabi,
Cyprien de Lichy,
John McKay,
Cynthia He,
William Campbell
Abstract:
Federated Learning (FL) has emerged as a result of data ownership and privacy concerns to prevent data from being shared between multiple parties included in a training procedure. Although issues, such as privacy, have gained significant attention in this domain, not much attention has been given to satisfying statistical fairness measures in the FL setting. With this goal in mind, we conduct stud…
▽ More
Federated Learning (FL) has emerged as a result of data ownership and privacy concerns to prevent data from being shared between multiple parties included in a training procedure. Although issues, such as privacy, have gained significant attention in this domain, not much attention has been given to satisfying statistical fairness measures in the FL setting. With this goal in mind, we conduct studies to show that FL is able to satisfy different fairness metrics under different data regimes consisting of different types of clients. More specifically, uncooperative or adversarial clients might contaminate the global FL model by injecting biased or poisoned models due to existing biases in their training datasets. Those biases might be a result of imbalanced training set (Zhang and Zhou 2019), historical biases (Mehrabi et al. 2021a), or poisoned data-points from data poisoning attacks against fairness (Mehrabi et al. 2021b; Solans, Biggio, and Castillo 2020). Thus, we propose a new FL framework that is able to satisfy multiple objectives including various statistical fairness metrics. Through experimentation, we then show the effectiveness of this method comparing it with various baselines, its ability in satisfying different objectives collectively and individually, and its ability in identifying uncooperative or adversarial clients and down-weighing their effect
△ Less
Submitted 24 January, 2022;
originally announced January 2022.
-
A non-parametric Bayesian approach for adjusting partial compliance in sequential decision making
Authors:
Indrabati Bhattacharya,
Brent A. Johnson,
William Artman,
Andrew Wilson,
Kevin G. Lynch,
James R. McKay,
Ashkan Ertefaie
Abstract:
Existing methods in estimating the mean outcome under a given dynamic treatment regime rely on intention-to-treat analyses which estimate the effect of following a certain dynamic treatment regime regardless of compliance behavior of patients. There are two major concerns with intention-to-treat analyses: (1) the estimated effects are often biased toward the null effect; (2) the results are not ge…
▽ More
Existing methods in estimating the mean outcome under a given dynamic treatment regime rely on intention-to-treat analyses which estimate the effect of following a certain dynamic treatment regime regardless of compliance behavior of patients. There are two major concerns with intention-to-treat analyses: (1) the estimated effects are often biased toward the null effect; (2) the results are not generalizable and reproducible due to the potential differential compliance behavior. These are particularly problematic in settings with high level of non-compliance such as substance use disorder treatments. Our work is motivated by the Adaptive Treatment for Alcohol and Cocaine Dependence study (ENGAGE), which is a multi-stage trial that aimed to construct optimal treatment strategies to engage patients in therapy. Due to the relatively low level of compliance in this trial, intention-to-treat analyses essentially estimate the effect of being randomized to a certain treatment sequence which is not of interest. We fill this important gap by defining the target parameter as the mean outcome under a dynamic treatment regime given potential compliance strata. We propose a flexible non-parametric Bayesian approach, which consists of a Gaussian copula model for the potential compliances, and a Dirichlet process mixture model for the potential outcomes. Our simulations highlight the need for and usefulness of this approach in practice and illustrate the robustness of our estimator in non-linear and non-Gaussian settings.
△ Less
Submitted 1 October, 2021;
originally announced October 2021.
-
Kashiwa Lectures on "New Approaches to the Monster"
Authors:
John McKay,
Yang-Hui He
Abstract:
These notes stem from lectures given by the first author (JM) at the 2008 "Moonshine Conference in Kashiwa" and contain a number of new perspectives and observations on Monstrous Moonshine. Because many new points have not appeared anywhere in print, it is thought expedient to update, annotate and clarify them (as footnotes), an editorial task which the second author (YHH) is more than delighted t…
▽ More
These notes stem from lectures given by the first author (JM) at the 2008 "Moonshine Conference in Kashiwa" and contain a number of new perspectives and observations on Monstrous Moonshine. Because many new points have not appeared anywhere in print, it is thought expedient to update, annotate and clarify them (as footnotes), an editorial task which the second author (YHH) is more than delighted to undertake. We hope the various puzzles and correspondences, delivered in a personal and casual manner, will serve as diversions intriguing to the community.
△ Less
Submitted 27 May, 2021;
originally announced June 2021.
-
Sample size estimation for comparing dynamic treatment regimens in a SMART: a Monte Carlo-based approach and case study with longitudinal overdispersed count outcomes
Authors:
Jamie Yap,
John J. Dziak,
Raju Maiti,
Kevin G. Lynch,
James R. McKay,
Bibhas Chakraborty,
Inbal Nahum-Shani
Abstract:
Dynamic treatment regimens (DTRs), also known as treatment algorithms or adaptive interventions, play an increasingly important role in many health domains. DTRs are motivated to address the unique and changing needs of individuals by delivering the type of treatment needed, when needed, while minimizing unnecessary treatment. Practically, a DTR is a sequence of decision rules that specify, for ea…
▽ More
Dynamic treatment regimens (DTRs), also known as treatment algorithms or adaptive interventions, play an increasingly important role in many health domains. DTRs are motivated to address the unique and changing needs of individuals by delivering the type of treatment needed, when needed, while minimizing unnecessary treatment. Practically, a DTR is a sequence of decision rules that specify, for each of several points in time, how available information about the individual's status and progress should be used in practice to decide which treatment (e.g., type or intensity) to deliver. The sequential multiple assignment randomized trial (SMART) is an experimental design widely used to empirically inform the development of DTRs. Sample size planning resources for SMARTs have been developed for continuous, binary, and survival outcomes. However, an important gap exists in sample size estimation methodology for SMARTs with longitudinal count outcomes. Further, in many health domains, count data are overdispersed - having variance greater than their mean. We propose a Monte Carlo-based approach to sample size estimation applicable to many types of longitudinal outcomes and provide a case study with longitudinal overdispersed count outcomes. A SMART for engaging alcohol and cocaine-dependent patients in treatment is used as motivation.
△ Less
Submitted 8 March, 2023; v1 submitted 31 March, 2021;
originally announced April 2021.
-
What Does It Mean to be a "Depleted" Comet? High Spectral Resolution Observations of the Prototypical Depleted Comet 21P/Giacobini-Zinner from McDonald Observatory
Authors:
Anita L. Cochran,
Tyler Nelson,
Adam J. McKay
Abstract:
We present high spectral resolution optical observations of comet 21P/Giacobini-Zinner from six nights in 2018. The observations were obtained with the Tull coude spectrograph on the 2.7m Harlan J. Smith Telescope of McDonald Observatory. This comet's spectrum shows strong depletions in C$_2$, C$_3$, CH, and NH$_2$ relative to CN. We explore what it means for a comet to be depleted and show that a…
▽ More
We present high spectral resolution optical observations of comet 21P/Giacobini-Zinner from six nights in 2018. The observations were obtained with the Tull coude spectrograph on the 2.7m Harlan J. Smith Telescope of McDonald Observatory. This comet's spectrum shows strong depletions in C$_2$, C$_3$, CH, and NH$_2$ relative to CN. We explore what it means for a comet to be depleted and show that all of the species are present in the spectrum at similar relative line intensities within a a molecular band compared with a typical comet. The depletions represent a much lower abundance of the species studied.
△ Less
Submitted 2 September, 2020;
originally announced September 2020.
-
Bayesian Set of Best Dynamic Treatment Regimes and Sample Size Determination for SMARTs with Binary Outcomes
Authors:
William J. Artman,
Ashkan Ertefaie,
Kevin G. Lynch,
James R. McKay
Abstract:
One of the main goals of sequential, multiple assignment, randomized trials (SMART) is to find the most efficacious design embedded dynamic treatment regimes. The analysis method known as multiple comparisons with the best (MCB) allows comparison between dynamic treatment regimes and identification of a set of optimal regimes in the frequentist setting for continuous outcomes, thereby, directly ad…
▽ More
One of the main goals of sequential, multiple assignment, randomized trials (SMART) is to find the most efficacious design embedded dynamic treatment regimes. The analysis method known as multiple comparisons with the best (MCB) allows comparison between dynamic treatment regimes and identification of a set of optimal regimes in the frequentist setting for continuous outcomes, thereby, directly addressing the main goal of a SMART. In this paper, we develop a Bayesian generalization to MCB for SMARTs with binary outcomes. Furthermore, we show how to choose the sample size so that the inferior embedded DTRs are screened out with a specified power. We compare log-odds between different DTRs using their exact distribution without relying on asymptotic normality in either the analysis or the power calculation. We conduct extensive simulation studies under two SMART designs and illustrate our method's application to the Adaptive Treatment for Alcohol and Cocaine Dependence (ENGAGE) trial.
△ Less
Submitted 5 August, 2020;
originally announced August 2020.
-
Adjusting for Partial Compliance in SMARTs: a Bayesian Semiparametric Approach
Authors:
William J. Artman,
Ashkan Ertefaie,
Kevin G. Lynch,
James R. McKay,
Brent A. Johnson
Abstract:
The cyclical and heterogeneous nature of many substance use disorders highlights the need to adapt the type or the dose of treatment to accommodate the specific and changing needs of individuals. The Adaptive Treatment for Alcohol and Cocaine Dependence study (ENGAGE) is a multi-stage randomized trial that aimed to provide longitudinal data for constructing treatment strategies to improve patients…
▽ More
The cyclical and heterogeneous nature of many substance use disorders highlights the need to adapt the type or the dose of treatment to accommodate the specific and changing needs of individuals. The Adaptive Treatment for Alcohol and Cocaine Dependence study (ENGAGE) is a multi-stage randomized trial that aimed to provide longitudinal data for constructing treatment strategies to improve patients' engagement in therapy. However, the high rate of noncompliance and lack of analytic tools to account for noncompliance have impeded researchers from using the data to achieve the main goal of the trial. We overcome this issue by defining our target parameter as the mean outcome under different treatment strategies for given potential compliance strata and propose a Bayesian semiparametric model to estimate this quantity. While it adds substantial complexities to the analysis, one important feature of our work is that we consider partial rather than binary compliance classes which is more relevant in longitudinal studies. We assess the performance of our method through comprehensive simulation studies. We illustrate its application on the ENGAGE study and demonstrate that the optimal treatment strategy depends on compliance strata.
△ Less
Submitted 20 May, 2020;
originally announced May 2020.
-
Robust Q-learning
Authors:
Ashkan Ertefaie,
James R. McKay,
David Oslin,
Robert L. Strawderman
Abstract:
Q-learning is a regression-based approach that is widely used to formalize the development of an optimal dynamic treatment strategy. Finite dimensional working models are typically used to estimate certain nuisance parameters, and misspecification of these working models can result in residual confounding and/or efficiency loss. We propose a robust Q-learning approach which allows estimating such…
▽ More
Q-learning is a regression-based approach that is widely used to formalize the development of an optimal dynamic treatment strategy. Finite dimensional working models are typically used to estimate certain nuisance parameters, and misspecification of these working models can result in residual confounding and/or efficiency loss. We propose a robust Q-learning approach which allows estimating such nuisance parameters using data-adaptive techniques. We study the asymptotic behavior of our estimators and provide simulation studies that highlight the need for and usefulness of the proposed method in practice. We use the data from the "Extending Treatment Effectiveness of Naltrexone" multi-stage randomized trial to illustrate our proposed methods.
△ Less
Submitted 27 March, 2020;
originally announced March 2020.
-
Detection of a Water Tracer in Interstellar Comet 2I/Borisov
Authors:
Adam J. McKay,
Anita L. Cochran,
Neil Dello Russo,
Michael DiSanti
Abstract:
We present high spectral resolution optical spectra obtained with the ARCES instrument at Apache Point Observatory showing detection of the [OI]6300 A line in interstellar comet 2I/Borisov. We employ the observed flux in this line to derive an H$_2$O production rate of (6.3$\pm$1.5)$\times$10$^{26}$ mol s$^{-1}$. Comparing to previously reported observations of CN, this implies a CN/H$_2$O ratio o…
▽ More
We present high spectral resolution optical spectra obtained with the ARCES instrument at Apache Point Observatory showing detection of the [OI]6300 A line in interstellar comet 2I/Borisov. We employ the observed flux in this line to derive an H$_2$O production rate of (6.3$\pm$1.5)$\times$10$^{26}$ mol s$^{-1}$. Comparing to previously reported observations of CN, this implies a CN/H$_2$O ratio of $\sim$0.3-0.6%. The lower end of this range is consistent with the average value in comets, while the upper end is higher than the average value for Solar System comets, but still within the range of observed values. C$_2$/H$_2$O is depleted, with a value likely less than 0.1%. The dust-to-gas ratio is consistent with the normal value for Solar System comets. Using a simple sublimation model we estimate an H$_2$O active area of 1.7 km$^2$, which for current estimates for the size of Borisov suggests active fractions between 1-150%, consistent with values measured in Solar System comets. More detailed characterization of 2I/Borisov, including compositional information and properties of the nucleus, is needed to fully interpret the observed H$_2$O production rate.
△ Less
Submitted 28 January, 2020; v1 submitted 28 October, 2019;
originally announced October 2019.
-
Thresholded Non-Uniform Fourier Frame-Based Reconstruction for Stripmap SAR
Authors:
John McKay,
Anne Gelb,
Suren Jayasuriya,
Vishal Monga
Abstract:
Fourier domain methods are fast algorithms for SAR imaging. They typically involve an interpolation in the frequency domain to re-grid non-uniform data so inverse fast Fourier transforms can be performed. In this paper, we apply a frame reconstruction algorithm, extending the non-uniform fast Fourier transform, to stripmap SAR data. Further, we present an improved thresholded frame reconstruction…
▽ More
Fourier domain methods are fast algorithms for SAR imaging. They typically involve an interpolation in the frequency domain to re-grid non-uniform data so inverse fast Fourier transforms can be performed. In this paper, we apply a frame reconstruction algorithm, extending the non-uniform fast Fourier transform, to stripmap SAR data. Further, we present an improved thresholded frame reconstruction algorithm for robust performance and improved computational efficiency. We demonstrate compelling results on real stripmap SAR data.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
The impact of (n,$γ$) reaction rate uncertainties on the predicted abundances of i-process elements with $32\leq Z\leq 48$ in the metal-poor star HD94028
Authors:
John E. McKay,
Pavel A. Denissenkov,
Falk Herwig,
Georgios Perdikakis,
Hendrik Schatz
Abstract:
Several anomalous elemental abundance ratios have been observed in the metal-poor star HD94028. We assume that its high [As/Ge] ratio is a product of a weak intermediate (i) neutron-capture process. Given that observational errors are usually smaller than predicted nuclear physics uncertainties, we have first set up a benchmark one-zone i-process nucleosynthesis simulation results of which provide…
▽ More
Several anomalous elemental abundance ratios have been observed in the metal-poor star HD94028. We assume that its high [As/Ge] ratio is a product of a weak intermediate (i) neutron-capture process. Given that observational errors are usually smaller than predicted nuclear physics uncertainties, we have first set up a benchmark one-zone i-process nucleosynthesis simulation results of which provide the best fit to the observed abundances. We have then performed Monte Carlo simulations in which 113 relevant (n,$γ$) reaction rates of unstable species were randomly varied within Hauser-Feshbach model uncertainty ranges for each reaction to estimate the impact on the predicted stellar abundances. One of the interesting results of these simulations is a double-peaked distribution of the As abundance, which is caused by the variation of the $^{75}$Ga (n,$γ$) cross section. This variation strongly anti-correlates with the predicted As abundance, confirming the necessity for improved theoretical or experimental bounds on this cross section. The $^{66}$Ni (n,$γ$) reaction is found to behave as a major bottleneck for the i-process nucleosynthesis. Our analysis finds the Pearson product-moment correlation coefficient $r_\mathrm{P} > 0.2$ for all of the i-process elements with $32 \leq Z \leq 42$, with significant changes in their predicted abundances showing up when the rate of this reaction is reduced to its theoretically constrained lower bound. Our results are applicable to any other stellar nucleosynthesis site with the similar i-process conditions, such as Sakurai's object (V4334 Sagittarii) or rapidly-accreting white dwarfs.
△ Less
Submitted 27 November, 2019; v1 submitted 16 September, 2019;
originally announced September 2019.
-
Coupling Rendering and Generative Adversarial Networks for Artificial SAS Image Generation
Authors:
Albert Reed,
Isaac Gerg,
John McKay,
Daniel Brown,
David Williams,
Suren Jayasuriya
Abstract:
Acquisition of Synthetic Aperture Sonar (SAS) datasets is bottlenecked by the costly deployment of SAS imaging systems, and even when data acquisition is possible,the data is often skewed towards containing barren seafloor rather than objects of interest. We present a novel pipeline, called SAS GAN, which couples an optical renderer with a generative adversarial network (GAN) to synthesize realist…
▽ More
Acquisition of Synthetic Aperture Sonar (SAS) datasets is bottlenecked by the costly deployment of SAS imaging systems, and even when data acquisition is possible,the data is often skewed towards containing barren seafloor rather than objects of interest. We present a novel pipeline, called SAS GAN, which couples an optical renderer with a generative adversarial network (GAN) to synthesize realistic SAS images of targets on the seafloor. This coupling enables high levels of SAS image realism while enabling control over image geometry and parameters. We demonstrate qualitative results by presenting examples of images created with our pipeline. We also present quantitative results through the use of t-SNE and the Fréchet Inception Distance to argue that our generated SAS imagery potentially augments SAS datasets more effectively than an off-the-shelf GAN.
△ Less
Submitted 2 October, 2019; v1 submitted 13 September, 2019;
originally announced September 2019.
-
Cusps, Congruence Groups and Monstrous Dessins
Authors:
Valdo Tatitscheff,
Yang-Hui He,
John McKay
Abstract:
We study general properties of the dessins d'enfants associated with the Hecke congruence subgroups $Γ_0(N)$ of the modular group $\mathrm{PSL}_2(\mathbb{R})$. The definition of the $Γ_0(N)$ as the stabilisers of couples of projective lattices in a two-dimensional vector space gives an interpretation of the quotient set $Γ_0(N)\backslash\mathrm{PSL}_2(\mathbb{R})$ as the projective lattices $N$-hy…
▽ More
We study general properties of the dessins d'enfants associated with the Hecke congruence subgroups $Γ_0(N)$ of the modular group $\mathrm{PSL}_2(\mathbb{R})$. The definition of the $Γ_0(N)$ as the stabilisers of couples of projective lattices in a two-dimensional vector space gives an interpretation of the quotient set $Γ_0(N)\backslash\mathrm{PSL}_2(\mathbb{R})$ as the projective lattices $N$-hyperdistant from a reference one, and hence as the projective line over the ring $\mathbb{Z}/N\mathbb{Z}$. The natural action of $\mathrm{PSL}_2(\mathbb{R})$ on the lattices defines a dessin d'enfant structure, allowing for a combinatorial approach to features of the classical modular curves, such as the torsion points and the cusps. We tabulate the dessins d'enfants associated with the $15$ Hecke congruence subgroups of genus zero, which arise in Moonshine for the Monster sporadic group.
△ Less
Submitted 12 July, 2020; v1 submitted 31 December, 2018;
originally announced December 2018.
-
Non-Invasive Functional-Brain-Imaging with a Novel Magnetoencephalography System
Authors:
Amir Borna,
Tony R. Carter,
Anthony P. Colombo,
Yuan-Yu Jau,
Jim McKay,
Michael Weisend,
Samu Taulu,
Julia M. Stephen,
Peter D. D. Schwindt
Abstract:
A non-invasive functional-brain-imaging system based on optically-pumped-magnetometers (OPM) is presented. The OPM-based magnetoencephalography (MEG) system features 20 OPM channels conforming to the subject's scalp. Due to proximity (12 mm) of the OPM channels to the brain, it is anticipated that this MEG system offers an enhanced spatial resolution as it can capture finer spatial features compar…
▽ More
A non-invasive functional-brain-imaging system based on optically-pumped-magnetometers (OPM) is presented. The OPM-based magnetoencephalography (MEG) system features 20 OPM channels conforming to the subject's scalp. Due to proximity (12 mm) of the OPM channels to the brain, it is anticipated that this MEG system offers an enhanced spatial resolution as it can capture finer spatial features compared to traditional MEG systems employing superconducting quantum interference device (SQUID). We have conducted two MEG experiments on three subjects: somatosensory evoked magnetic field (SEF) and auditory evoked magnetic field (AEF) using our OPM-based MEG system and a commercial SQUID-based MEG system. We have cross validated the robustness of our system by calculating the distance between the location of the equivalent current dipole (ECD) yielded by our OPM-based MEG system and the ECD location calculated by the commercial SQUID-based MEG system. We achieved sub-centimeter accuracy for both SEF and AEF responses in all three subjects.
△ Less
Submitted 6 December, 2018;
originally announced December 2018.
-
Sample size considerations for comparing dynamic treatment regimens in a sequential multiple-assignment randomized trial with a continuous longitudinal outcome
Authors:
Nicholas J. Seewald,
Kelley M. Kidwell,
Inbal Nahum-Shani,
Tianshuang Wu,
James R. McKay,
Daniel Almirall
Abstract:
Clinicians and researchers alike are increasingly interested in how best to personalize interventions. A dynamic treatment regimen (DTR) is a sequence of pre-specified decision rules which can be used to guide the delivery of a sequence of treatments or interventions that are tailored to the changing needs of the individual. The sequential multiple-assignment randomized trial (SMART) is a research…
▽ More
Clinicians and researchers alike are increasingly interested in how best to personalize interventions. A dynamic treatment regimen (DTR) is a sequence of pre-specified decision rules which can be used to guide the delivery of a sequence of treatments or interventions that are tailored to the changing needs of the individual. The sequential multiple-assignment randomized trial (SMART) is a research tool which allows for the construction of effective DTRs. We derive easy-to-use formulae for computing the total sample size for three common two-stage SMART designs in which the primary aim is to compare mean end-of-study outcomes for two embedded DTRs which recommend different first-stage treatments. The formulae are derived in the context of a regression model which leverages information from a longitudinal outcome collected over the entire study. We show that the sample size formula for a SMART can be written as the product of the sample size formula for a standard two-arm randomized trial, a deflation factor that accounts for the increased statistical efficiency resulting from a longitudinal analysis, and an inflation factor that accounts for the design of a SMART. The SMART design inflation factor is typically a function of the anticipated probability of response to first-stage treatment. We review modeling and estimation for DTR effect analyses using a longitudinal outcome from a SMART, as well as the estimation of standard errors. We also present estimators for the covariance matrix for a variety of common working correlation structures. Methods are motivated using the ENGAGE study, a SMART aimed at develo** a DTR for increasing motivation to attend treatments among alcohol- and cocaine-dependent patients.
△ Less
Submitted 5 January, 2020; v1 submitted 30 October, 2018;
originally announced October 2018.
-
Mass Measurements of Neutron-Rich Gallium Isotopes Refine Production of Nuclei of the First r-Process Abundance Peak in Neutron Star Merger Calculations
Authors:
M. P. Reiter,
S. Ayet San Andrés,
S. Nikas,
J. Lippuner,
C. Andreoiu,
C. Babcock,
B. R. Barquest,
J. Bollig,
T. Brunner,
T. Dickel,
J. Dilling,
I. Dillmann,
E. Dunling,
G. Gwinner,
L. Graham,
C. Hornung,
R. Klawitter,
B. Kootte,
A. A. Kwiatkowski,
Y. Lan,
D. Lascar,
K. G. Leach,
E. Leistenschneider,
G. Martínez-Pinedo,
J. E. McKay
, et al. (11 additional authors not shown)
Abstract:
We report mass measurements of neutron-rich Ga isotopes $^{80-85}$Ga with TRIUMF's Ion Trap for Atomic and Nuclear science (TITAN). The measurements determine the masses of $^{80-83}$Ga in good agreement with previous measurements. The masses of $^{84}$Ga and $^{85}$Ga were measured for the first time. Uncertainties between $25-48$ keV were reached. The new mass values reduce the nuclear uncertain…
▽ More
We report mass measurements of neutron-rich Ga isotopes $^{80-85}$Ga with TRIUMF's Ion Trap for Atomic and Nuclear science (TITAN). The measurements determine the masses of $^{80-83}$Ga in good agreement with previous measurements. The masses of $^{84}$Ga and $^{85}$Ga were measured for the first time. Uncertainties between $25-48$ keV were reached. The new mass values reduce the nuclear uncertainties associated with the production of A $\approx$ 84 isotopes by the \emph{r}-process for astrophysical conditions that might be consistent with a binary neutron star (BNS) merger producing a blue kilonova. Our nucleosynthesis simulations confirm that BNS merger may contribute to the first abundance peak under moderate neutron-rich conditions with electron fractions $Y_e=0.35-0.38$.
△ Less
Submitted 30 January, 2020; v1 submitted 26 October, 2018;
originally announced October 2018.
-
Minimal Spin-one Isotriplet Dark Matter
Authors:
Alexander Belyaev,
Giacomo Cacciapaglia,
James McKay,
Dixon Marin,
Alfonso R. Zerwekh
Abstract:
In this work we present a simple extension of the Standard Model that contains, as the only new physics component, a massive spin-one matter field in the adjoint representation of $SU(2)_{L}$. In order to be consistent with perturbative unitarity, the vector field must be odd under a $Z_{2}$ symmetry. Radiative corrections make the neutral component of the triplet ($V^{0}$) slightly lighter than t…
▽ More
In this work we present a simple extension of the Standard Model that contains, as the only new physics component, a massive spin-one matter field in the adjoint representation of $SU(2)_{L}$. In order to be consistent with perturbative unitarity, the vector field must be odd under a $Z_{2}$ symmetry. Radiative corrections make the neutral component of the triplet ($V^{0}$) slightly lighter than the charged ones. We show that $V^{0}$ can be the dark matter particle while satisfying all current bounds if it has a mass between $2.8$ and $3.8$ TeV. We present the current limit on the model parameter space from highly complementary experimental constraints including dark matter relic density measurement, dark matter direct and indirect detection searches, LHC data on Higgs couplings to photons and LHC data on disappearing track searches. We show that the two-dimensional parameter space can be substantially covered by disappearing track searches at a future 100 TeV hadron collider, which will probe DM mass upto about 1.2 TeV.
△ Less
Submitted 14 August, 2020; v1 submitted 30 August, 2018;
originally announced August 2018.
-
Impact of vacuum stability, perturbativity and XENON1T on global fits of $\mathbb{Z}_2$ and $\mathbb{Z}_3$ scalar singlet dark matter
Authors:
Peter Athron,
Jonathan M. Cornell,
Felix Kahlhoefer,
James McKay,
Pat Scott,
Sebastian Wild
Abstract:
Scalar singlet dark matter is one of the simplest and most predictive realisations of the WIMP (weakly-interacting massive particle) idea. Although the model is constrained from all directions by the latest experimental data, it still has viable regions of parameter space. Another compelling aspect of scalar singlets is their ability to stabilise the electroweak vacuum. Indeed, models of scalar da…
▽ More
Scalar singlet dark matter is one of the simplest and most predictive realisations of the WIMP (weakly-interacting massive particle) idea. Although the model is constrained from all directions by the latest experimental data, it still has viable regions of parameter space. Another compelling aspect of scalar singlets is their ability to stabilise the electroweak vacuum. Indeed, models of scalar dark matter are not low-energy effective theories, but can be valid all the way to the Planck scale. Using the GAMBIT framework, we present the first global fit to include both the low-energy experimental constraints and the theoretical constraints from UV physics, considering models with a scalar singlet charged under either a $\mathbb{Z}_2$ or a $\mathbb{Z}_3$ symmetry. We show that if the model is to satisfy all experimental constraints, completely stabilise the electroweak vacuum up to high scales, and also remain perturbative to those scales, one is driven to a relatively small region of parameter space. This region has a Higgs-portal coupling slightly less than 1, a dark matter mass of 1 to 2 TeV and a spin-independent nuclear scattering cross-section around 10$^{-45}$ cm$^2$.
△ Less
Submitted 19 October, 2018; v1 submitted 29 June, 2018;
originally announced June 2018.
-
Power Analysis in a SMART Design: Sample Size Estimation for Determining the Best Dynamic Treatment Regime
Authors:
William J. Artman,
Inbal Nahum-Shani,
Tianshuang Wu,
James R. McKay,
Ashkan Ertefaie
Abstract:
Sequential, multiple assignment, randomized trial (SMART) designs have become increasingly popular in the field of precision medicine by providing a means for comparing sequences of treatments tailored to the individual patient, i.e., dynamic treatment regime (DTR). The construction of evidence-based DTRs promises a replacement to adhoc one-size-fits-all decisions pervasive in patient care. Howeve…
▽ More
Sequential, multiple assignment, randomized trial (SMART) designs have become increasingly popular in the field of precision medicine by providing a means for comparing sequences of treatments tailored to the individual patient, i.e., dynamic treatment regime (DTR). The construction of evidence-based DTRs promises a replacement to adhoc one-size-fits-all decisions pervasive in patient care. However, there are substantial statistical challenges in sizing SMART designs due to the complex correlation structure between the DTRs embedded in the design. Since the primary goal of SMARTs is the construction of an optimal DTR, investigators are interested in sizing SMARTs based on the ability to screen out DTRs inferior to the optimal DTR by a given amount which cannot be done using existing methods. In this paper, we fill this gap by develo** a rigorous power analysis framework that leverages multiple comparisons with the best methodology. Our method employs Monte Carlo simulation in order to compute the minimum number of individuals to enroll in an arbitrary SMART. We will evaluate our method through extensive simulation studies. We will illustrate our method by retrospectively computing the power in the Extending Treatment Effectiveness of Naltrexone SMART study.
△ Less
Submitted 17 March, 2018;
originally announced April 2018.
-
Evolution of H$_2$O Production in Comet C/2012 S1 (ISON) as Inferred from Forbidden Oxygen and OH Emission
Authors:
Adam J. McKay,
Anita L. Cochran,
Michael A. DiSanti,
Neil Dello Russo,
Harold Weaver,
Ronald J. Vervack Jr.,
Walter M. Harris,
Hideyo Kawakita
Abstract:
We present H$_2$O production rates for comet C/2012 S1 (ISON) derived from observations of [OI] and OH emission during its inbound leg, covering a heliocentric distance range of 1.8-0.44 AU. Our production rates are in agreement with previous measurements using a variety of instruments and techniques and with data from the various observatories greatly differing in their projected fields of view.…
▽ More
We present H$_2$O production rates for comet C/2012 S1 (ISON) derived from observations of [OI] and OH emission during its inbound leg, covering a heliocentric distance range of 1.8-0.44 AU. Our production rates are in agreement with previous measurements using a variety of instruments and techniques and with data from the various observatories greatly differing in their projected fields of view. The consistent results across all data suggest the absence of an extended source of H$_2$O production, for example sublimation of icy grains in the coma, or a source with spatial extent confined to the dimensions of the smallest projected field of view (in this case $<$ 1,000 km). We find that ISON had an active area of around 10 km$^2$ for heliocentric distances R$_h$ > 1.2 AU, which then decreased to about half this value from R$_h$=1.2-0.9 AU. This was followed by a rapid increase in active area at about R$_h$=0.6 AU, corresponding to the first of three major outbursts ISON experienced inside of 1 AU. The combination of a detected outburst in the light curve and rapid increase in active area likely indicates a major nucleus fragmentation event. The 5-10 km$^2$ active area observed outside of R$_h$=0.6 AU is consistent with a 50-100% active fraction for the nucleus, larger than typically observed for cometary nuclei. Although the absolute value of the active area is somewhat dependent on the thermal model employed, the changes in active area observed are consistent among models. The conclusion of a 50-100+% active fraction is robust for realistic thermal models of the nucleus. However the possibility of a contribution of a spatially unresolved distribution of icy grains cannot be discounted.
△ Less
Submitted 16 February, 2018;
originally announced February 2018.
-
Bridging the Gap: Simultaneous Fine Tuning for Data Re-Balancing
Authors:
John McKay,
Isaac Gerg,
Vishal Monga
Abstract:
There are many real-world classification problems wherein the issue of data imbalance (the case when a data set contains substantially more samples for one/many classes than the rest) is unavoidable. While under-sampling the problematic classes is a common solution, this is not a compelling option when the large data class is itself diverse and/or the limited data class is especially small. We sug…
▽ More
There are many real-world classification problems wherein the issue of data imbalance (the case when a data set contains substantially more samples for one/many classes than the rest) is unavoidable. While under-sampling the problematic classes is a common solution, this is not a compelling option when the large data class is itself diverse and/or the limited data class is especially small. We suggest a strategy based on recent work concerning limited data problems which utilizes a supplemental set of images with similar properties to the limited data class to aid in the training of a neural network. We show results for our model against other typical methods on a real-world synthetic aperture sonar data set. Code can be found at github.com/JohnMcKay/dataImbalance.
△ Less
Submitted 8 January, 2018;
originally announced January 2018.
-
Strong CO$^+$ and N$_2^+$ Emission in Comet C/2016 R2 (Pan-STARRS)
Authors:
Anita L. Cochran,
Adam J. McKay
Abstract:
We report on imaging and spectroscopic observations of comet C/2016~R2 (Pan-STARRS) obtained with the 0.8\,m and 2.7\,m telescopes of McDonald Observatory in November and December 2017 respectively. The comet was at a heliocentric distance greater than 3\,{\sc au} during both sets of observations. The images showed a well-developed tail with properties that suggested it was an ion tail. The spectr…
▽ More
We report on imaging and spectroscopic observations of comet C/2016~R2 (Pan-STARRS) obtained with the 0.8\,m and 2.7\,m telescopes of McDonald Observatory in November and December 2017 respectively. The comet was at a heliocentric distance greater than 3\,{\sc au} during both sets of observations. The images showed a well-developed tail with properties that suggested it was an ion tail. The spectra confirmed that we were observing well-developed bands of CO$^+$ and N$_2^+$. The N$_2^+$ detection was unequivocally cometary and was one of the strongest bands of N$_2^+$ detected in a comet spectrum. We derived the ratio of these two ions and from that we were able to derive that N$_2$/CO = 0.15. This is the highest such ratio reported for a comet.
Note erratum - N2/CO=0.06 not 0.15.
△ Less
Submitted 14 March, 2018; v1 submitted 3 January, 2018;
originally announced January 2018.
-
Two-loop mass splittings in electroweak multiplets: winos and minimal dark matter
Authors:
James McKay,
Pat Scott
Abstract:
The radiatively-induced splitting of masses in electroweak multiplets is relevant for both collider phenomenology and dark matter. Precision two-loop corrections of $\mathcal{O}$(MeV) to the triplet mass splitting in the wino limit of the minimal supersymmetric standard model can affect particle lifetimes by up to $40\%$. We improve on previous two-loop self-energy calculations for the wino model…
▽ More
The radiatively-induced splitting of masses in electroweak multiplets is relevant for both collider phenomenology and dark matter. Precision two-loop corrections of $\mathcal{O}$(MeV) to the triplet mass splitting in the wino limit of the minimal supersymmetric standard model can affect particle lifetimes by up to $40\%$. We improve on previous two-loop self-energy calculations for the wino model by obtaining consistent input parameters to the calculation via two-loop renormalisation-group running, and including the effect of finite light quark masses. We also present the first two-loop calculation of the mass splitting in an electroweak fermionic quintuplet, corresponding to the viable form of minimal dark matter (MDM). We place significant constraints on the lifetimes of the charged and doubly-charged fermions in this model. We find that the two-loop mass splittings in the MDM quintuplet are not constant in the large-mass limit, as might naively be expected from the triplet calculation. This is due to the influence of the additional heavy fermions in loop corrections to the gauge boson propagators.
△ Less
Submitted 1 April, 2018; v1 submitted 4 December, 2017;
originally announced December 2017.
-
Erland Samuel Bring's "Transformation of Algebraic Equations"
Authors:
Alexander Chen,
Yang-Hui He,
John McKay
Abstract:
We translate Erland Samuel Bring's treatise Meletemata quaedam Mathematica circa Transformationem Aequationum Alebraicarum (Some selected mathematics on the Transformation of Algebraic Equations) written as his Promotionschrift at the University of Lund in 1786, from its Latin into English, with modern mathematical notation.
Bring (1736 - 98) made important contributions to algebraic equations a…
▽ More
We translate Erland Samuel Bring's treatise Meletemata quaedam Mathematica circa Transformationem Aequationum Alebraicarum (Some selected mathematics on the Transformation of Algebraic Equations) written as his Promotionschrift at the University of Lund in 1786, from its Latin into English, with modern mathematical notation.
Bring (1736 - 98) made important contributions to algebraic equations and obtained the canonical form x^5+px+q = 0 for quintics before Jerrard, Ruffini and Abel. In due course, he realized the significance of the projective curve which now bears his name: the complete intersection of the homogeneous Fermat polynomials of degrees 1,2,3 in CP^4.
△ Less
Submitted 25 November, 2017;
originally announced November 2017.
-
Dawning of the N=32 shell closure seen through precision mass measurements of neutron-rich titanium isotopes
Authors:
E. Leistenschneider,
M. P. Reiter,
S. Ayet San Andrés,
B. Kootte,
J. D. Holt,
P. Navrátil,
C. Babcock,
C. Barbieri,
B. R. Barquest,
J. Bergmann,
J. Bollig,
T. Brunner,
E. Dunling,
A. Finlay,
H. Geissel,
L. Graham,
F. Greiner,
H. Hergert,
C. Hornung,
C. Jesch,
R. Klawitter,
Y. Lan,
D. Lascar,
K. G. Leach,
W. Lippert
, et al. (20 additional authors not shown)
Abstract:
A precision mass investigation of the neutron-rich titanium isotopes $^{51-55}$Ti was performed at TRIUMF's Ion Trap for Atomic and Nuclear science (TITAN). The range of the measurements covers the $N=32$ shell closure and the overall uncertainties of the $^{52-55}$Ti mass values were significantly reduced. Our results confirm the existence of a weak shell effect at $N=32$, establishing the abrupt…
▽ More
A precision mass investigation of the neutron-rich titanium isotopes $^{51-55}$Ti was performed at TRIUMF's Ion Trap for Atomic and Nuclear science (TITAN). The range of the measurements covers the $N=32$ shell closure and the overall uncertainties of the $^{52-55}$Ti mass values were significantly reduced. Our results confirm the existence of a weak shell effect at $N=32$, establishing the abrupt onset of this shell closure. Our data were compared with state-of-the-art \textit{ab-initio} shell model calculations which, despite very successfully describing where the $N=32$ shell gap is strong, overpredict its strength and extent in titanium and heavier isotones. These measurements also represent the first scientific results of TITAN using the newly commissioned Multiple-Reflection Time-of-Flight Mass Spectrometer (MR-TOF-MS), substantiated by independent measurements from TITAN's Penning trap mass spectrometer.
△ Less
Submitted 18 January, 2018; v1 submitted 23 October, 2017;
originally announced October 2017.
-
Global fits of the scalar singlet model using GAMBIT
Authors:
James McKay
Abstract:
The extension of the standard model (SM) by a Higgs portal scalar field is one the simplest dark matter theories. We present here the first results for a global fit to this model using the global and beyond the SM inference tool (GAMBIT). This software enables the combination of dark matter constraints in a statistically consistent manner. In total 15 parameters are varied and the parameter space…
▽ More
The extension of the standard model (SM) by a Higgs portal scalar field is one the simplest dark matter theories. We present here the first results for a global fit to this model using the global and beyond the SM inference tool (GAMBIT). This software enables the combination of dark matter constraints in a statistically consistent manner. In total 15 parameters are varied and the parameter space explored using four different scanning algorithms. The viable parameter space is reduced from previous studies of this model due to the inclusion of the latest direct detection constraints.
△ Less
Submitted 6 October, 2017;
originally announced October 2017.
-
Pitfalls of iterative pole mass calculation in electroweak multiplets
Authors:
James McKay,
Pat Scott,
Peter Athron
Abstract:
The radiatively-induced mass splitting between components of an electroweak multiplet is typically of order 100 MeV. This is sufficient to endow the charged components with macroscopically-observable lifetimes, and ensure an electrically-neutral dark matter particle. We show that a commonly used iterative procedure to compute radiatively-corrected pole masses can lead to very different mass splitt…
▽ More
The radiatively-induced mass splitting between components of an electroweak multiplet is typically of order 100 MeV. This is sufficient to endow the charged components with macroscopically-observable lifetimes, and ensure an electrically-neutral dark matter particle. We show that a commonly used iterative procedure to compute radiatively-corrected pole masses can lead to very different mass splittings than a non-iterative calculation at the same loop order. By estimating the uncertainties of the two one-loop results, we show that the iterative procedure is significantly more sensitive to the choice of renormalisation scale and gauge parameter than the non-iterative method. This can cause the lifetime of the charged component to vary by up to 12 orders of magnitude if iteration is employed. We show that individual pole masses exhibit similar scale-dependence regardless of the procedure, but that the leading scale-dependent terms cancel when computing the mass splitting if and only if the non-iterative procedure is employed. We show that this behaviour persists at two-loop order: the precision of the mass splitting improves in the non-iterative approach, but our results suggest that higher-order corrections do not reduce the uncertainty in the iterative calculation enough to resolve the problem at two-loop order. We conclude that the iterative procedure should not be used for computing pole masses in situations where electroweak mass splittings are phenomenologically relevant.
△ Less
Submitted 15 April, 2018; v1 submitted 4 October, 2017;
originally announced October 2017.
-
Fast Stochastic Hierarchical Bayesian MAP for Tomographic Imaging
Authors:
John McKay,
Raghu G. Raj,
Vishal Monga
Abstract:
Any image recovery algorithm attempts to achieve the highest quality reconstruction in a timely manner. The former can be achieved in several ways, among which are by incorporating Bayesian priors that exploit natural image tendencies to cue in on relevant phenomena. The Hierarchical Bayesian MAP (HB-MAP) is one such approach which is known to produce compelling results albeit at a substantial com…
▽ More
Any image recovery algorithm attempts to achieve the highest quality reconstruction in a timely manner. The former can be achieved in several ways, among which are by incorporating Bayesian priors that exploit natural image tendencies to cue in on relevant phenomena. The Hierarchical Bayesian MAP (HB-MAP) is one such approach which is known to produce compelling results albeit at a substantial computational cost. We look to provide further analysis and insights into what makes the HB-MAP work. While retaining the proficient nature of HB-MAP's Type-I estimation, we propose a stochastic approximation-based approach to Type-II estimation. The resulting algorithm, fast stochastic HB-MAP (fsHBMAP), takes dramatically fewer operations while retaining high reconstruction quality. We employ our fsHBMAP scheme towards the problem of tomographic imaging and demonstrate that fsHBMAP furnishes promising results when compared to many competing methods.
△ Less
Submitted 7 July, 2017;
originally announced July 2017.
-
What's Mine is Yours: Pretrained CNNs for Limited Training Sonar ATR
Authors:
John McKay,
Isaac Gerg,
Vishal Monga,
Raghu Raj
Abstract:
Finding mines in Sonar imagery is a significant problem with a great deal of relevance for seafaring military and commercial endeavors. Unfortunately, the lack of enormous Sonar image data sets has prevented automatic target recognition (ATR) algorithms from some of the same advances seen in other computer vision fields. Namely, the boom in convolutional neural nets (CNNs) which have been able to…
▽ More
Finding mines in Sonar imagery is a significant problem with a great deal of relevance for seafaring military and commercial endeavors. Unfortunately, the lack of enormous Sonar image data sets has prevented automatic target recognition (ATR) algorithms from some of the same advances seen in other computer vision fields. Namely, the boom in convolutional neural nets (CNNs) which have been able to achieve incredible results - even surpassing human actors - has not been an easily feasible route for many practitioners of Sonar ATR. We demonstrate the power of one avenue to incorporating CNNs into Sonar ATR: transfer learning. We first show how well a straightforward, flexible CNN feature-extraction strategy can be used to obtain impressive if not state-of-the-art results. Secondly, we propose a way to utilize the powerful transfer learning approach towards multiple instance target detection and identification within a provided synthetic aperture Sonar data set.
△ Less
Submitted 29 June, 2017;
originally announced June 2017.
-
Robust Sonar ATR Through Bayesian Pose Corrected Sparse Classification
Authors:
John McKay,
Vishal Monga,
Raghu G. Raj
Abstract:
Sonar imaging has seen vast improvements over the last few decades due in part to advances in synthetic aperture Sonar (SAS). Sophisticated classification techniques can now be used in Sonar automatic target recognition (ATR) to locate mines and other threatening objects. Among the most promising of these methods is sparse reconstruction-based classification (SRC) which has shown an impressive res…
▽ More
Sonar imaging has seen vast improvements over the last few decades due in part to advances in synthetic aperture Sonar (SAS). Sophisticated classification techniques can now be used in Sonar automatic target recognition (ATR) to locate mines and other threatening objects. Among the most promising of these methods is sparse reconstruction-based classification (SRC) which has shown an impressive resiliency to noise, blur, and occlusion. We present a coherent strategy for expanding upon SRC for Sonar ATR that retains SRC's robustness while also being able to handle targets with diverse geometric arrangements, bothersome Rayleigh noise, and unavoidable background clutter. Our method, pose corrected sparsity (PCS), incorporates a novel interpretation of a spike and slab probability distribution towards use as a Bayesian prior for class-specific discrimination in combination with a dictionary learning scheme for localized patch extractions. Additionally, PCS offers the potential for anomaly detection in order to avoid false identifications of tested objects from outside the training set with no additional training required. Compelling results are shown using a database provided by the United States Naval Surface Warfare Center.
△ Less
Submitted 26 June, 2017;
originally announced June 2017.
-
Using Frame Theoretic Convolutional Gridding for Robust Synthetic Aperture Sonar Imaging
Authors:
John McKay,
Anne Gelb,
Vishal Monga,
Raghu Raj
Abstract:
Recent progress in synthetic aperture sonar (SAS) technology and processing has led to significant advances in underwater imaging, outperforming previously common approaches in both accuracy and efficiency. There are, however, inherent limitations to current SAS reconstruction methodology. In particular, popular and efficient Fourier domain SAS methods require a 2D interpolation which is often ill…
▽ More
Recent progress in synthetic aperture sonar (SAS) technology and processing has led to significant advances in underwater imaging, outperforming previously common approaches in both accuracy and efficiency. There are, however, inherent limitations to current SAS reconstruction methodology. In particular, popular and efficient Fourier domain SAS methods require a 2D interpolation which is often ill conditioned and inaccurate, inevitably reducing robustness with regard to speckle and inaccurate sound-speed estimation. To overcome these issues, we propose using the frame theoretic convolution gridding (FTCG) algorithm to handle the non-uniform Fourier data. FTCG extends upon non-uniform fast Fourier transform (NUFFT) algorithms by casting the NUFFT as an approximation problem given Fourier frame data. The FTCG has been show to yield improved accuracy at little more computational cost. Using simulated data, we outline how the FTCG can be used to enhance current SAS processing.
△ Less
Submitted 26 June, 2017;
originally announced June 2017.
-
A 20-Channel Magnetoencephalography System Based on Optically Pumped Magnetometers
Authors:
Amir Borna,
Tony R. Carter,
Anthony P. Colombo,
Yuan-Yu Jau,
Christopher Berry,
Jim McKay,
Julia Stephen,
Michael Weisend,
Peter D. D. Schwindt
Abstract:
We describe a multichannel magnetoencephalography (MEG) system that uses optically pumped magnetometers (OPMs) to sense the magnetic fields of the human brain. The system consists of an array of 20 OPM channels conforming to the human subject's head, a person-sized magnetic shield containing the array and the human subject, a laser system to drive the OPM array, and various control and data acquis…
▽ More
We describe a multichannel magnetoencephalography (MEG) system that uses optically pumped magnetometers (OPMs) to sense the magnetic fields of the human brain. The system consists of an array of 20 OPM channels conforming to the human subject's head, a person-sized magnetic shield containing the array and the human subject, a laser system to drive the OPM array, and various control and data acquisitions systems. We conducted two MEG experiments: auditory evoked magnetic field (AEF) and somatosensory evoked magnetic field (SEF), on three healthy male subjects, using both our OPM array and a 306-channel Elekta-Neuromag superconducting quantum interference device (SQUID) MEG system. The described OPM array measures the tangential components of the magnetic field as opposed to the radial component measured by all SQUID-based MEG systems. Herein we compare the results of the OPM- and SQUID-based MEG systems on the auditory and somatosensory data recorded in the same individuals on both systems.
△ Less
Submitted 19 June, 2017;
originally announced June 2017.
-
The 67P/Churyumov-Gerasimenko observation campaign in support of the Rosetta mission
Authors:
C. Snodgrass,
M. F. A'Hearn,
F. Aceituno,
V. Afanasiev,
S. Bagnulo,
J. Bauer,
G. Bergond,
S. Besse,
N. Biver,
D. Bodewits,
H. Boehnhardt,
B. P. Bonev,
G. Borisov,
B. Carry,
V. Casanova,
A. Cochran,
B. C. Conn,
B. Davidsson,
J. K. Davies,
J. de León,
E. de Mooij,
M. de Val-Borro,
M. Delacruz,
M. A. DiSanti,
J. E. Drew
, et al. (90 additional authors not shown)
Abstract:
We present a summary of the campaign of remote observations that supported the European Space Agency's Rosetta mission. Telescopes across the globe (and in space) followed comet 67P/Churyumov-Gerasimenko from before Rosetta's arrival until nearly the end of mission in September 2016. These provided essential data for mission planning, large-scale context information for the coma and tails beyond t…
▽ More
We present a summary of the campaign of remote observations that supported the European Space Agency's Rosetta mission. Telescopes across the globe (and in space) followed comet 67P/Churyumov-Gerasimenko from before Rosetta's arrival until nearly the end of mission in September 2016. These provided essential data for mission planning, large-scale context information for the coma and tails beyond the spacecraft, and a way to directly compare 67P with other comets. The observations revealed 67P to be a relatively `well behaved' comet, typical of Jupiter family comets and with activity patterns that repeat from orbit-to-orbit. Comparison between this large collection of telescopic observations and the in situ results from Rosetta will allow us to better understand comet coma chemistry and structure. This work is just beginning as the mission ends -- in this paper we present a summary of the ground-based observations and early results, and point to many questions that will be addressed in future studies.
△ Less
Submitted 30 May, 2017;
originally announced May 2017.
-
Comparison of statistical sampling methods with ScannerBit, the GAMBIT scanning module
Authors:
The GAMBIT Scanner Workgroup,
:,
Gregory D. Martinez,
James McKay,
Ben Farmer,
Pat Scott,
Elinore Roebber,
Antje Putze,
Jan Conrad
Abstract:
We introduce ScannerBit, the statistics and sampling module of the public, open-source global fitting framework GAMBIT. ScannerBit provides a standardised interface to different sampling algorithms, enabling the use and comparison of multiple computational methods for inferring profile likelihoods, Bayesian posteriors, and other statistical quantities. The current version offers random, grid, rast…
▽ More
We introduce ScannerBit, the statistics and sampling module of the public, open-source global fitting framework GAMBIT. ScannerBit provides a standardised interface to different sampling algorithms, enabling the use and comparison of multiple computational methods for inferring profile likelihoods, Bayesian posteriors, and other statistical quantities. The current version offers random, grid, raster, nested sampling, differential evolution, Markov Chain Monte Carlo (MCMC) and ensemble Monte Carlo samplers. We also announce the release of a new standalone differential evolution sampler, Diver, and describe its design, usage and interface to ScannerBit. We subject Diver and three other samplers (the nested sampler MultiNest, the MCMC GreAT, and the native ScannerBit implementation of the ensemble Monte Carlo algorithm T-Walk) to a battery of statistical tests. For this we use a realistic physical likelihood function, based on the scalar singlet model of dark matter. We examine the performance of each sampler as a function of its adjustable settings, and the dimensionality of the sampling problem. We evaluate performance on four metrics: optimality of the best fit found, completeness in exploring the best-fit region, number of likelihood evaluations, and total runtime. For Bayesian posterior estimation at high resolution, T-Walk provides the most accurate and timely map** of the full parameter space. For profile likelihood analysis in less than about ten dimensions, we find that Diver and MultiNest score similarly in terms of best fit and speed, outperforming GreAT and T-Walk; in ten or more dimensions, Diver substantially outperforms the other three samplers on all metrics.
△ Less
Submitted 15 October, 2017; v1 submitted 22 May, 2017;
originally announced May 2017.
-
SpecBit, DecayBit and PrecisionBit: GAMBIT modules for computing mass spectra, particle decay rates and precision observables
Authors:
The GAMBIT Models Workgroup,
:,
Peter Athron,
Csaba Balázs,
Lars A. Dal,
Joakim Edsjö,
Ben Farmer,
Tomás E. Gonzalo,
Anders Kvellestad,
James McKay,
Antje Putze,
Chris Rogan,
Pat Scott,
Christoph Weniger,
Martin White
Abstract:
We present the GAMBIT modules SpecBit, DecayBit and PrecisionBit. Together they provide a new framework for linking publicly available spectrum generators, decay codes and other precision observable calculations in a physically and statistically consistent manner. This allows users to automatically run various combinations of existing codes as if they are a single package. The modular design allow…
▽ More
We present the GAMBIT modules SpecBit, DecayBit and PrecisionBit. Together they provide a new framework for linking publicly available spectrum generators, decay codes and other precision observable calculations in a physically and statistically consistent manner. This allows users to automatically run various combinations of existing codes as if they are a single package. The modular design allows software packages fulfilling the same role to be exchanged freely at runtime, with the results presented in a common format that can be easily passed to downstream dark matter, collider and flavour codes. These modules constitute an essential part of the broader GAMBIT framework, a major new software package for performing global fits. In this paper we present the observable calculations, data, and likelihood functions implemented in the three modules, as well as the conventions and assumptions used in interfacing them with external codes. We also present 3-BIT-HIT, a command-line utility for computing mass spectra, couplings, decays and precision observables in the MSSM, which shows how the three modules can be easily used independently of GAMBIT.
△ Less
Submitted 17 January, 2019; v1 submitted 22 May, 2017;
originally announced May 2017.
-
Status of the scalar singlet dark matter model
Authors:
The GAMBIT Collaboration,
Peter Athron,
Csaba Balázs,
Torsten Bringmann,
Andy Buckley,
Marcin Chrząszcz,
Jan Conrad,
Jonathan M. Cornell,
Lars A. Dal,
Joakim Edsjö,
Ben Farmer,
Paul Jackson,
Felix Kahlhoefer,
Abram Krislock,
Anders Kvellestad,
James McKay,
Farvah Mahmoudi,
Gregory D. Martinez,
Antje Putze,
Are Raklev,
Christopher Rogan,
Aldo Saavedra,
Christopher Savage,
Pat Scott,
Nicola Serra
, et al. (2 additional authors not shown)
Abstract:
One of the simplest viable models for dark matter is an additional neutral scalar, stabilised by a $\mathbb{Z}_2$ symmetry. Using the GAMBIT package and combining results from four independent samplers, we present Bayesian and frequentist global fits of this model. We vary the singlet mass and coupling along with 13 nuisance parameters, including nuclear uncertainties relevant for direct detection…
▽ More
One of the simplest viable models for dark matter is an additional neutral scalar, stabilised by a $\mathbb{Z}_2$ symmetry. Using the GAMBIT package and combining results from four independent samplers, we present Bayesian and frequentist global fits of this model. We vary the singlet mass and coupling along with 13 nuisance parameters, including nuclear uncertainties relevant for direct detection, the local dark matter density, and selected quark masses and couplings. We include the dark matter relic density measured by Planck, direct searches with LUX, PandaX, SuperCDMS and XENON100, limits on invisible Higgs decays from the Large Hadron Collider, searches for high-energy neutrinos from dark matter annihilation in the Sun with IceCube, and searches for gamma rays from annihilation in dwarf galaxies with the Fermi-LAT. Viable solutions remain at couplings of order unity, for singlet masses between the Higgs mass and about 300 GeV, and at masses above $\sim$1 TeV. Only in the latter case can the scalar singlet constitute all of dark matter. Frequentist analysis shows that the low-mass resonance region, where the singlet is about half the mass of the Higgs, can also account for all of dark matter, and remains viable. However, Bayesian considerations show this region to be rather fine-tuned.
△ Less
Submitted 19 October, 2018; v1 submitted 22 May, 2017;
originally announced May 2017.
-
GAMBIT: The Global and Modular Beyond-the-Standard-Model Inference Tool
Authors:
The GAMBIT Collaboration,
Peter Athron,
Csaba Balazs,
Torsten Bringmann,
Andy Buckley,
Marcin Chrząszcz,
Jan Conrad,
Jonathan M. Cornell,
Lars A. Dal,
Hugh Dickinson,
Joakim Edsjö,
Ben Farmer,
Tomás E. Gonzalo,
Paul Jackson,
Abram Krislock,
Anders Kvellestad,
Johan Lundberg,
James McKay,
Farvah Mahmoudi,
Gregory D. Martinez,
Antje Putze,
Are Raklev,
Joachim Ripken,
Christopher Rogan,
Aldo Saavedra
, et al. (7 additional authors not shown)
Abstract:
We describe the open-source global fitting package GAMBIT: the Global And Modular Beyond-the-Standard-Model Inference Tool. GAMBIT combines extensive calculations of observables and likelihoods in particle and astroparticle physics with a hierarchical model database, advanced tools for automatically building analyses of essentially any model, a flexible and powerful system for interfacing to exter…
▽ More
We describe the open-source global fitting package GAMBIT: the Global And Modular Beyond-the-Standard-Model Inference Tool. GAMBIT combines extensive calculations of observables and likelihoods in particle and astroparticle physics with a hierarchical model database, advanced tools for automatically building analyses of essentially any model, a flexible and powerful system for interfacing to external codes, a suite of different statistical methods and parameter scanning algorithms, and a host of other utilities designed to make scans faster, safer and more easily-extendible than in the past. Here we give a detailed description of the framework, its design and motivation, and the current models and other specific components presently implemented in GAMBIT. Accompanying papers deal with individual modules and present first GAMBIT results. GAMBIT can be downloaded from gambit.hepforge.org.
△ Less
Submitted 3 November, 2017; v1 submitted 22 May, 2017;
originally announced May 2017.
-
The LOFAR Two-metre Sky Survey - I. Survey Description and Preliminary Data Release
Authors:
T. W. Shimwell,
H. J. A. Röttgering,
P. N. Best,
W. L. Williams,
T. J. Dijkema,
F. de Gasperin,
M. J. Hardcastle,
G. H. Heald,
D. N. Hoang,
A. Horneffer,
H. Intema,
E. K. Mahony,
S. Mandal,
A. P. Mechev,
L. Morabito,
J. B. R. Oonk,
D. Rafferty,
E. Retana-Montenegro,
J. Sabater,
C. Tasse,
R. J. van Weeren,
M. Brüggen,
G. Brunetti,
K. T. Chyży,
J. E. Conway
, et al. (47 additional authors not shown)
Abstract:
The LOFAR Two-metre Sky Survey (LoTSS) is a deep 120-168 MHz imaging survey that will eventually cover the entire Northern sky. Each of the 3170 pointings will be observed for 8 hrs, which, at most declinations, is sufficient to produce ~5arcsec resolution images with a sensitivity of ~0.1mJy/beam and accomplish the main scientific aims of the survey which are to explore the formation and evolutio…
▽ More
The LOFAR Two-metre Sky Survey (LoTSS) is a deep 120-168 MHz imaging survey that will eventually cover the entire Northern sky. Each of the 3170 pointings will be observed for 8 hrs, which, at most declinations, is sufficient to produce ~5arcsec resolution images with a sensitivity of ~0.1mJy/beam and accomplish the main scientific aims of the survey which are to explore the formation and evolution of massive black holes, galaxies, clusters of galaxies and large-scale structure. Due to the compact core and long baselines of LOFAR, the images provide excellent sensitivity to both highly extended and compact emission. For legacy value, the data are archived at high spectral and time resolution to facilitate subarcsecond imaging and spectral line studies. In this paper we provide an overview of the LoTSS. We outline the survey strategy, the observational status, the current calibration techniques, a preliminary data release, and the anticipated scientific impact. The preliminary images that we have released were created using a fully-automated but direction-independent calibration strategy and are significantly more sensitive than those produced by any existing large-area low-frequency survey. In excess of 44,000 sources are detected in the images that have a resolution of 25arcsec, typical noise levels of less than 0.5 mJy/beam, and cover an area of over 350 square degrees in the region of the HETDEX Spring Field (right ascension 10h45m00s to 15h30m00s and declination 45d00m00s to 57d00m00s).
△ Less
Submitted 8 November, 2016;
originally announced November 2016.
-
Observational Constraints on Water Sublimation from 24 Themis and 1 Ceres
Authors:
Adam J. McKay,
Dennis Bodewits,
Jian-Yang Li
Abstract:
Recent observations have suggested that there is water ice present on the surfaces of 24 Themis and 1 Ceres. We present upper limits on the H$_2$O production rate on these bodies derived using a search for [OI]6300 Angstrom emission. For Themis, the water production is less than 4.5 $\times$ 10$^{27}$ mol s$^{-1}$, while for Ceres our derived upper limit is 4.6 $\times$ 10$^{28}$ mol s$^{-1}$. The…
▽ More
Recent observations have suggested that there is water ice present on the surfaces of 24 Themis and 1 Ceres. We present upper limits on the H$_2$O production rate on these bodies derived using a search for [OI]6300 Angstrom emission. For Themis, the water production is less than 4.5 $\times$ 10$^{27}$ mol s$^{-1}$, while for Ceres our derived upper limit is 4.6 $\times$ 10$^{28}$ mol s$^{-1}$. The derived limits imply a very low fraction of the surface area of each asteroid is active ($<$ 2 $\times$ 10$^{-4}$), though this estimate varies by as much as an order of magnitude depending on thermal properties of the surface. This is much lower than seen for comets, which have active areas of 10$^{-2}$ - 10$^{-1}$. We discuss possible implications for our findings on the nature of water ice on Themis and Ceres.
△ Less
Submitted 22 September, 2016;
originally announced September 2016.
-
Localized Dictionary design for Geometrically Robust Sonar ATR
Authors:
John McKay,
Vishal Monga,
Raghu Raj
Abstract:
Advancements in Sonar image capture have opened the door to powerful classification schemes for automatic target recognition (ATR. Recent work has particularly seen the application of sparse reconstruction-based classification (SRC) to sonar ATR, which provides compelling accuracy rates even in the presence of noise and blur. Existing sparsity based sonar ATR techniques however assume that the tes…
▽ More
Advancements in Sonar image capture have opened the door to powerful classification schemes for automatic target recognition (ATR. Recent work has particularly seen the application of sparse reconstruction-based classification (SRC) to sonar ATR, which provides compelling accuracy rates even in the presence of noise and blur. Existing sparsity based sonar ATR techniques however assume that the test images exhibit geometric pose that is consistent with respect to the training set. This work addresses the outstanding open challenge of handling inconsistently posed test sonar images relative to training. We develop a new localized block-based dictionary design that can enable geometric, i.e. pose robustness. Further, a dictionary learning method is incorporated to increase performance and efficiency. The proposed SRC with Localized Pose Management (LPM), is shown to outperform the state of the art SIFT feature and SVM approach, due to its power to discern background clutter in Sonar images.
△ Less
Submitted 13 January, 2016;
originally announced January 2016.
-
Discriminative Sparsity for Sonar ATR
Authors:
John McKay,
Raghu Raj,
Vishal Monga,
Jason Isaacs
Abstract:
Advancements in Sonar image capture have enabled researchers to apply sophisticated object identification algorithms in order to locate targets of interest in images such as mines. Despite progress in this field, modern sonar automatic target recognition (ATR) approaches lack robustness to the amount of noise one would expect in real-world scenarios, the capability to handle blurring incurred from…
▽ More
Advancements in Sonar image capture have enabled researchers to apply sophisticated object identification algorithms in order to locate targets of interest in images such as mines. Despite progress in this field, modern sonar automatic target recognition (ATR) approaches lack robustness to the amount of noise one would expect in real-world scenarios, the capability to handle blurring incurred from the physics of image capture, and the ability to excel with relatively few training samples. We address these challenges by adapting modern sparsity-based techniques with dictionaries comprising of training from each class. We develop new discriminative (as opposed to generative) sparse representations which can help automatically classify targets in Sonar imaging. Using a simulated SAS data set from the Naval Surface Warfare Center (NSWC), we obtained compelling classification rates for multi-class problems even in cases with considerable noise and sparsity in training samples.
△ Less
Submitted 1 January, 2016;
originally announced January 2016.