-
A Primer for Telemetry Interfacing in Accordance with NASA Standards Using Low Cost FPGAs
Authors:
Jake A. McCoy,
Ted B. Schultz,
James H. Tutt,
Thomas Rogers,
Drew M. Miles,
Randall L. McEntaffer
Abstract:
Photon counting detector systems on sounding rocket payloads often require interfacing asynchronous outputs with a synchronously clocked telemetry (TM) stream. Though this can be handled with an on-board computer, there are several low cost alternatives including custom hardware, microcontrollers and field-programmable gate arrays (FPGAs). This paper outlines how a TM interface (TMIF) for detector…
▽ More
Photon counting detector systems on sounding rocket payloads often require interfacing asynchronous outputs with a synchronously clocked telemetry (TM) stream. Though this can be handled with an on-board computer, there are several low cost alternatives including custom hardware, microcontrollers and field-programmable gate arrays (FPGAs). This paper outlines how a TM interface (TMIF) for detectors on a sounding rocket with asynchronous parallel digital output can be implemented using low cost FPGAs and minimal custom hardware. Low power consumption and high speed FPGAs are available as commercial off-the-shelf (COTS) products and can be used to develop the main component of the TMIF. Then, only a small amount of additional hardware is required for signal buffering and level translating. This paper also discusses how this system can be tested with a simulated TM chain in the small laboratory setting using FPGAs and COTS specialized data acquisition products.
△ Less
Submitted 22 March, 2022;
originally announced March 2022.
-
Applied Nanofabrication for X-ray Grating Spectroscopy
Authors:
Jake A. McCoy
Abstract:
Measuring the diffuse, highly-ionized baryonic content in galactic halos and the intergalactic medium through soft x-ray absorption spectroscopy of active galactic nuclei is a main scientific objective of the Lynx X-ray Observatory mission concept that can only be accomplished with a next-generation grating spectrometer. Realizing such an instrument using reflection grating technology requires tho…
▽ More
Measuring the diffuse, highly-ionized baryonic content in galactic halos and the intergalactic medium through soft x-ray absorption spectroscopy of active galactic nuclei is a main scientific objective of the Lynx X-ray Observatory mission concept that can only be accomplished with a next-generation grating spectrometer. Realizing such an instrument using reflection grating technology requires thousands of custom blazed gratings that each perform with high diffraction efficiency to be manufactured and aligned to intercept radiation coming to a focus in a Wolter-I telescope. The aim of this thesis is to implement two recently-developed techniques in nanofabrication for this task, with an emphasis on beamline diffraction-efficiency testing for characterizing spectral sensitivity. In particular, thermally-activated selective topography equilibration (TASTE) is pursued as a means for fabricating a master grating with the key advantage that it enables blazed groove facets to be patterned in polymeric electron-beam resist over a non-parallel groove layout not limited by substrate crystal structure. Additionally, substrate-conformal imprint lithography (SCIL) is studied as a method for mass manufacturing high-fidelity grating replicas in a silica sol-gel resist while avoiding many of the detriments associated with large-area patterning in other nanoimprint techniques. Diffraction-efficiency testing of sub-micron grating prototypes coated with gold shows that TASTE is capable of meeting Lynx requirements for spectral sensitivity, with room for improvement at small groove periods, and that while SCIL offers a promising avenue for Lynx grating production, imprints suffer a small blaze-angle reduction due to resist shrinkage. Accompanying this dissertation are appendices that outline physics fundamentals for x-ray spectral lines, x-ray optics, and diffraction gratings.
△ Less
Submitted 16 June, 2022; v1 submitted 18 March, 2021;
originally announced March 2021.
-
Fabrication of astronomical x-ray reflection gratings using thermally activated selective topography equilibration
Authors:
Jake A. McCoy,
Randall L. McEntaffer,
Chad M. Eichfeld
Abstract:
Thermally activated selective topography equilibration (TASTE) enables the creation of 3D structures in resist using grayscale electron-beam lithography followed by a thermal treatment to induce a selective polymer reflow. A blazed grating topography can be created by reflowing repeating staircase patterns in resist into wedge-like structures. Motivated by astronomical applications, such patterns…
▽ More
Thermally activated selective topography equilibration (TASTE) enables the creation of 3D structures in resist using grayscale electron-beam lithography followed by a thermal treatment to induce a selective polymer reflow. A blazed grating topography can be created by reflowing repeating staircase patterns in resist into wedge-like structures. Motivated by astronomical applications, such patterns with periodicities 840 nm and 400 nm have been fabricated in 130 nm-thick PMMA using TASTE to provide a base for X-ray reflection gratings. A path forward to integrate this alternative blazing technique into grating fabrication recipes is discussed.
△ Less
Submitted 2 February, 2021;
originally announced February 2021.
-
X-ray verification of sol-gel resist shrinkage in substrate-conformal imprint lithography for a replicated blazed reflection grating
Authors:
Jake A. McCoy,
Marc A. Verschuuren,
Drew M. Miles,
Randall L. McEntaffer
Abstract:
Surface-relief gratings fabricated through nanoimprint lithography (NIL) are prone to topographic distortion induced by resist shrinkage. Characterizing the impact of this effect on blazed diffraction efficiency is particularly important for applications in astrophysical spectroscopy at soft x-ray wavelengths ($λ\approx 0.5 - 5$~nm) that call for the mass-production of large-area grating replicas…
▽ More
Surface-relief gratings fabricated through nanoimprint lithography (NIL) are prone to topographic distortion induced by resist shrinkage. Characterizing the impact of this effect on blazed diffraction efficiency is particularly important for applications in astrophysical spectroscopy at soft x-ray wavelengths ($λ\approx 0.5 - 5$~nm) that call for the mass-production of large-area grating replicas with sub-micron, sawtooth surface-relief profiles. A variant of NIL that lends itself well for this task is substrate-conformal imprint lithography (SCIL), which uses a flexible, composite stamp formed from a rigid master template to imprint nanoscale features in an inorganic resist that cures thermodynamically through a silica sol-gel process. While SCIL enables the production of several hundred imprints before stamp degradation and avoids many of the detriments associated with large-area imprinting in NIL, the sol-gel resist suffers shrinkage dependent on the post-imprint cure temperature. Through atomic force microscopy and diffraction-efficiency testing at beamline 6.3.2 of the Advanced Light Source, the impact of this effect on blaze response is constrained for a $\sim$160-nm-period grating replica cured at 90$^{\circ}$C. Results demonstrate a $\sim$2$^{\circ}$ reduction in blaze angle relative to the master grating, which was fabricated by anisotropic wet etching in $\langle 311 \rangle$-oriented silicon to yield a facet angle close to 30$^{\circ}$.
△ Less
Submitted 27 October, 2020;
originally announced November 2020.
-
Extreme Ultraviolet and Soft X-Ray Diffraction Efficiency of a Blazed Reflection Grating Fabricated by Thermally Activated Selective Topography Equilibration
Authors:
Jake A. McCoy,
Randall L. McEntaffer,
Drew M. Miles
Abstract:
Future observatories utilizing reflection grating spectrometers for extreme ultraviolet (EUV) and soft X-ray (SXR) spectroscopy require high-fidelity gratings with both blazed groove facets and custom groove layouts that are often fanned or feature a slight curvature. While fabrication procedures centering on wet anisotropic etching in monocrystalline silicon produce highly efficient blazed gratin…
▽ More
Future observatories utilizing reflection grating spectrometers for extreme ultraviolet (EUV) and soft X-ray (SXR) spectroscopy require high-fidelity gratings with both blazed groove facets and custom groove layouts that are often fanned or feature a slight curvature. While fabrication procedures centering on wet anisotropic etching in monocrystalline silicon produce highly efficient blazed gratings, the precision of a nonparallel groove layout is limited by the cubic structure of the silicon crystal. This motivates the pursuit of alternative techniques to grating manufacture, namely thermally activated selective topography equilibration (TASTE), which uses gray-scale electron-beam lithography to pattern multilevel structures in resist followed by an optimized polymer thermal reflow to smooth the 3D patterns into continuous surface relief profiles. Using TASTE, a mold for a reflection grating with a periodicity of 400 nm and grooves resembling an asymmetric sawtooth was patterned in 130 nm thick poly(methyl methacrylate) resist on a silicon substrate over a 50 mm by 7.5 mm area. This structure was coated with 15 nm of gold by electron-beam physical vapor deposition using titanium as an adhesion layer and then tested for EUV and SXR diffraction efficiency at beamline 6.3.2 of the Advanced Light Source synchrotron facility. Results demonstrate a quasi-blaze response characteristic of a 27 degree blaze angle with groove facets smooth to 1.5 nm rms. Absolute peak-order efficiency ranges from 75% to 25%, while total relative efficiency measures gap90% across the measured bandpass of 15.5 nm > lambda > 1.55 nm.
△ Less
Submitted 13 March, 2020;
originally announced March 2020.
