-
Intruder band mixing in an ab initio description of 12Be
Authors:
Anna E. McCoy,
Mark A. Caprio,
Pieter Maris,
Patrick J. Fasano
Abstract:
The spectrum of 12Be exhibits exotic features, e.g., an intruder ground state and shape coexistence, normally associated with the breakdown of a shell closure. While previous phenomenological treatments indicated the ground state has substantial contributions from intruder configurations, it is only with advances in computational abilities and improved interactions that this intruder mixing is obs…
▽ More
The spectrum of 12Be exhibits exotic features, e.g., an intruder ground state and shape coexistence, normally associated with the breakdown of a shell closure. While previous phenomenological treatments indicated the ground state has substantial contributions from intruder configurations, it is only with advances in computational abilities and improved interactions that this intruder mixing is observed in ab initio no-core shell model (NCSM) predictions. In this work, we extract electromagnetic observables and symmetry decompositions from the NCSM wave functions to demonstrate that the low-lying positive parity spectrum can be explained in terms of mixing of rotational bands with very different intrinsic structure coexisting within the low-lying spectrum. These observed bands exhibit an approximate SU(3) symmetry and are qualitatively consistent with Elliott model predictions.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
Coronal Heating as Determined by the Solar Flare Frequency Distribution Obtained by Aggregating Case Studies
Authors:
James Paul Mason,
Alexandra Werth,
Colin G. West,
Allison A. Youngblood,
Donald L. Woodraska,
Courtney Peck,
Kevin Lacjak,
Florian G. Frick,
Moutamen Gabir,
Reema A. Alsinan,
Thomas Jacobsen,
Mohammad Alrubaie,
Kayla M. Chizmar,
Benjamin P. Lau,
Lizbeth Montoya Dominguez,
David Price,
Dylan R. Butler,
Connor J. Biron,
Nikita Feoktistov,
Kai Dewey,
N. E. Loomis,
Michal Bodzianowski,
Connor Kuybus,
Henry Dietrick,
Aubrey M. Wolfe
, et al. (977 additional authors not shown)
Abstract:
Flare frequency distributions represent a key approach to addressing one of the largest problems in solar and stellar physics: determining the mechanism that counter-intuitively heats coronae to temperatures that are orders of magnitude hotter than the corresponding photospheres. It is widely accepted that the magnetic field is responsible for the heating, but there are two competing mechanisms th…
▽ More
Flare frequency distributions represent a key approach to addressing one of the largest problems in solar and stellar physics: determining the mechanism that counter-intuitively heats coronae to temperatures that are orders of magnitude hotter than the corresponding photospheres. It is widely accepted that the magnetic field is responsible for the heating, but there are two competing mechanisms that could explain it: nanoflares or Alfvén waves. To date, neither can be directly observed. Nanoflares are, by definition, extremely small, but their aggregate energy release could represent a substantial heating mechanism, presuming they are sufficiently abundant. One way to test this presumption is via the flare frequency distribution, which describes how often flares of various energies occur. If the slope of the power law fitting the flare frequency distribution is above a critical threshold, $α=2$ as established in prior literature, then there should be a sufficient abundance of nanoflares to explain coronal heating. We performed $>$600 case studies of solar flares, made possible by an unprecedented number of data analysts via three semesters of an undergraduate physics laboratory course. This allowed us to include two crucial, but nontrivial, analysis methods: pre-flare baseline subtraction and computation of the flare energy, which requires determining flare start and stop times. We aggregated the results of these analyses into a statistical study to determine that $α= 1.63 \pm 0.03$. This is below the critical threshold, suggesting that Alfvén waves are an important driver of coronal heating.
△ Less
Submitted 9 May, 2023;
originally announced May 2023.
-
Nuclear $β$ decay as a probe for physics beyond the Standard Model
Authors:
M. Brodeur,
N. Buzinsky,
M. A. Caprio,
V. Cirigliano,
J. A. Clark,
P. J. Fasano,
J. A. Formaggio,
A. T. Gallant,
A. Garcia,
S. Gandolfi,
S. Gardner,
A. Glick-Magid,
L. Hayen,
H. Hergert,
J. D. Holt,
M. Horoi,
M. Y. Huang,
K. D. Launey,
K. G. Leach,
B. Longfellow,
A. Lovato,
A. E. McCoy,
D. Melconian,
P. Mohanmurthy,
D. C. Moore
, et al. (21 additional authors not shown)
Abstract:
This white paper was submitted to the 2022 Fundamental Symmetries, Neutrons, and Neutrinos (FSNN) Town Hall Meeting in preparation for the next NSAC Long Range Plan. We advocate to support current and future theoretical and experimental searches for physics beyond the Standard Model using nuclear $β$ decay.
This white paper was submitted to the 2022 Fundamental Symmetries, Neutrons, and Neutrinos (FSNN) Town Hall Meeting in preparation for the next NSAC Long Range Plan. We advocate to support current and future theoretical and experimental searches for physics beyond the Standard Model using nuclear $β$ decay.
△ Less
Submitted 10 January, 2023;
originally announced January 2023.
-
A Primer for Telemetry Interfacing in Accordance with NASA Standards Using Low Cost FPGAs
Authors:
Jake A. McCoy,
Ted B. Schultz,
James H. Tutt,
Thomas Rogers,
Drew M. Miles,
Randall L. McEntaffer
Abstract:
Photon counting detector systems on sounding rocket payloads often require interfacing asynchronous outputs with a synchronously clocked telemetry (TM) stream. Though this can be handled with an on-board computer, there are several low cost alternatives including custom hardware, microcontrollers and field-programmable gate arrays (FPGAs). This paper outlines how a TM interface (TMIF) for detector…
▽ More
Photon counting detector systems on sounding rocket payloads often require interfacing asynchronous outputs with a synchronously clocked telemetry (TM) stream. Though this can be handled with an on-board computer, there are several low cost alternatives including custom hardware, microcontrollers and field-programmable gate arrays (FPGAs). This paper outlines how a TM interface (TMIF) for detectors on a sounding rocket with asynchronous parallel digital output can be implemented using low cost FPGAs and minimal custom hardware. Low power consumption and high speed FPGAs are available as commercial off-the-shelf (COTS) products and can be used to develop the main component of the TMIF. Then, only a small amount of additional hardware is required for signal buffering and level translating. This paper also discusses how this system can be tested with a simulated TM chain in the small laboratory setting using FPGAs and COTS specialized data acquisition products.
△ Less
Submitted 22 March, 2022;
originally announced March 2022.
-
Symmetry and shape coexistence in 10Be
Authors:
M. A. Caprio,
A. E. McCoy,
P. J. Fasano,
T. Dytrych
Abstract:
Within the low-lying spectrum of 10Be, multiple rotational bands are found, with strikingly different moments of inertia. A proposed interpretation has been that these bands variously represent triaxial rotation and prolate axially-deformed rotation. The bands are well-reproduced in ab initio no-core configuration interaction (NCCI) calculations. We use the calculated wave functions to elucidate t…
▽ More
Within the low-lying spectrum of 10Be, multiple rotational bands are found, with strikingly different moments of inertia. A proposed interpretation has been that these bands variously represent triaxial rotation and prolate axially-deformed rotation. The bands are well-reproduced in ab initio no-core configuration interaction (NCCI) calculations. We use the calculated wave functions to elucidate the nuclear shapes underlying these bands, by examining the Elliott SU(3) symmetry content of these wave functions. The ab initio results support an interpretation in which the ground-state band, along with an accompanying K=2 side band, represent a triaxial rotor, arising from an SU(3) irreducible representation in the 0 hbar omega space. Then, the lowest excited K=0 band represents a prolate rotor, arising from an SU(3) irreducible representation in the 2 hbar omega space.
△ Less
Submitted 7 December, 2021;
originally announced December 2021.
-
A Cost-Effective, Scalable, and Portable IoT Data Infrastructure for Indoor Environment Sensing
Authors:
Sheik Anik,
Xinghua Gao,
Na Meng,
Philip Agee,
Andrew McCoy
Abstract:
The vast number of facility management systems, home automation systems, and the ever-increasing number of Internet of Things (IoT) devices are in constant need of environmental monitoring. Indoor environment data can be utilized to improve indoor facilities and better occupants' working and living experience, however, such data are scarce because many existing facility monitoring technologies are…
▽ More
The vast number of facility management systems, home automation systems, and the ever-increasing number of Internet of Things (IoT) devices are in constant need of environmental monitoring. Indoor environment data can be utilized to improve indoor facilities and better occupants' working and living experience, however, such data are scarce because many existing facility monitoring technologies are expensive and proprietary for certain building systems, such as building automation systems, energy management systems, and maintenance systems. In this work, the authors designed and prototyped a cost-effective, distributed, scalable, and portable indoor environmental data collection system, Building Data Lite (BDL). BDL is based on Raspberry Pi computers and multiple changeable arrays of sensors, such as sensors of temperature, humidity, light, motion, sound, vibration, and multiple types of gases. The system includes a distributed sensing network and a centralized server. The server provides a web-based graphical user interface that enables users to access the collected data over the Internet. To evaluate the BDL system's functionality, cost-effectiveness, scalability, and portability, the research team conducted a case study in an affordable housing community where the system prototype is deployed to 12 households. The case study results indicate that the system is functioning as designed, costs about \$3500 to sense 48 building zones (about \$73 per zone) and provides 12 types of indoor environment data, is easy to scale up, and is fully portable.
△ Less
Submitted 26 October, 2021;
originally announced October 2021.
-
First Measurement of the $B(E2; 3/2^- \rightarrow 1/2^-)$ Transition Strength in $^7$Be: Testing Ab Initio Predictions for $A=7$ Nuclei
Authors:
S. L. Henderson,
T. Ahn,
M. A. Caprio,
P. J. Fasano,
A. Simon,
W. Tan,
P. O'Malley,
J. Allen,
D. W. Bardayan,
D. Blankstein,
B. Frentz,
M. R. Hall,
J. J. Kolata,
A. E. McCoy,
S. Moylan,
C. S. Reingold,
S. Y. Strauss,
R. O. Torres-Isea
Abstract:
Electromagnetic observables are able to give insight into collective and emergent features in nuclei, including nuclear clustering. These observables also provide strong constraints for ab initio theory, but comparison of these observables between theory and experiment can be difficult due to the lack of convergence for relevant calculated values, such as $E2$ transition strengths. By comparing th…
▽ More
Electromagnetic observables are able to give insight into collective and emergent features in nuclei, including nuclear clustering. These observables also provide strong constraints for ab initio theory, but comparison of these observables between theory and experiment can be difficult due to the lack of convergence for relevant calculated values, such as $E2$ transition strengths. By comparing the ratios of $E2$ transition strengths for mirror transitions, we find that a wide range of ab initio calculations give robust and consistent predictions for this ratio. To experimentally test the validity of these ab initio predictions, we performed a Coulomb excitation experiment to measure the $B(E2; 3/2^- \rightarrow 1/2^-)$ transition strength in $^7$Be for the first time. A $B(E2; 3/2^- \rightarrow 1/2^-)$ value of $26(6)(3) \, e^2 \mathrm{fm}^4$ was deduced from the measured Coulomb excitation cross section. This result is used with the experimentally known $^7$Li $B(E2; 3/2^- \rightarrow 1/2^-)$ value to provide an experimental ratio to compare with the ab initio predictions. Our experimental value is consistent with the theoretical ratios within $1 σ$ uncertainty, giving experimental support for the value of these ratios. Further work in both theory and experiment can give insight into the robustness of these ratios and their physical meaning.
△ Less
Submitted 15 September, 2021;
originally announced September 2021.
-
Remeasuring the anomalously enhanced $B(E2; 2^+ \rightarrow 1^+)$ in $^8\mathrm{Li}$
Authors:
S. L. Henderson,
T. Ahn,
P. J. Fasano,
A. E. McCoy,
S. Aguilar,
D. T. Blankstein,
L. Caves,
A. C. Dombos,
R. K. Grzywacz,
K. L. Jones,
S. **,
R. Kelmar,
J. J. Kolata,
P. D. O'Malley,
C. S. Reingold,
A. Simon,
K. Smith
Abstract:
The large reported $E2$ strength between the $2^+$ ground state and $1^+$ first excited state of $\isotope[8]{Li}$, $B(E2; 2^+ \rightarrow 1^+)= 55(15)\,e^2\fm^4$, presents a puzzle. Unlike in neighboring $A=7\text{--}9$ isotopes, where enhanced $E2$ strengths may be understood to arise from deformation as rotational in-band transitions, the $2^+\rightarrow1^+$ transition in $^8$Li cannot be under…
▽ More
The large reported $E2$ strength between the $2^+$ ground state and $1^+$ first excited state of $\isotope[8]{Li}$, $B(E2; 2^+ \rightarrow 1^+)= 55(15)\,e^2\fm^4$, presents a puzzle. Unlike in neighboring $A=7\text{--}9$ isotopes, where enhanced $E2$ strengths may be understood to arise from deformation as rotational in-band transitions, the $2^+\rightarrow1^+$ transition in $^8$Li cannot be understood in any simple way as a rotational in-band transition. Moreover, the reported strength exceeds \textit{ab initio} predictions by an order of magnitude. In light of this discrepancy, we revisited the Coulomb excitation measurement of this strength, now using particle-$γ$ coincidences, yielding a revised $B(E2; 2^+ \rightarrow 1^+)$ of $19(^{+7}_{-6})(2)$~e$^2$fm$^4$. We explore how this value compares to what might be expected in the limits of rotational models. While the present value is about a factor of three smaller than previously reported, it remains anomalously enhanced.
△ Less
Submitted 5 May, 2023; v1 submitted 13 September, 2021;
originally announced September 2021.
-
Quadrupole moments and proton-neutron structure in p-shell mirror nuclei
Authors:
M. A. Caprio,
P. J. Fasano,
P. Maris,
A. E. McCoy
Abstract:
Electric quadrupole (E2) matrix elements provide a measure of nuclear deformation and related collective structure. Ground-state quadrupole moments in particular are known to high precision in many p-shell nuclei. While the experimental electric quadrupole moment only measures the proton distribution, both proton and neutron quadrupole moments are needed to probe proton-neutron asymmetry in the nu…
▽ More
Electric quadrupole (E2) matrix elements provide a measure of nuclear deformation and related collective structure. Ground-state quadrupole moments in particular are known to high precision in many p-shell nuclei. While the experimental electric quadrupole moment only measures the proton distribution, both proton and neutron quadrupole moments are needed to probe proton-neutron asymmetry in the nuclear deformation. We seek insight into the relation between these moments through the ab initio no-core configuration interaction (NCCI), or no-core shell model (NCSM), approach. Converged ab initio calculations for quadrupole moments are particularly challenging, due to sensitivity to long-range behavior of the wave functions. We therefore study more robustly-converged ratios of quadrupole moments: across mirror nuclides, or of proton and neutron quadrupole moments within the same nuclide. In calculations for mirror pairs in the p shell, we explore how well the predictions for mirror quadrupole moments agree with experiment and how well isospin (mirror) symmetry holds for quadrupole moments across a mirror pair.
△ Less
Submitted 18 September, 2021; v1 submitted 22 June, 2021;
originally announced June 2021.
-
Applied Nanofabrication for X-ray Grating Spectroscopy
Authors:
Jake A. McCoy
Abstract:
Measuring the diffuse, highly-ionized baryonic content in galactic halos and the intergalactic medium through soft x-ray absorption spectroscopy of active galactic nuclei is a main scientific objective of the Lynx X-ray Observatory mission concept that can only be accomplished with a next-generation grating spectrometer. Realizing such an instrument using reflection grating technology requires tho…
▽ More
Measuring the diffuse, highly-ionized baryonic content in galactic halos and the intergalactic medium through soft x-ray absorption spectroscopy of active galactic nuclei is a main scientific objective of the Lynx X-ray Observatory mission concept that can only be accomplished with a next-generation grating spectrometer. Realizing such an instrument using reflection grating technology requires thousands of custom blazed gratings that each perform with high diffraction efficiency to be manufactured and aligned to intercept radiation coming to a focus in a Wolter-I telescope. The aim of this thesis is to implement two recently-developed techniques in nanofabrication for this task, with an emphasis on beamline diffraction-efficiency testing for characterizing spectral sensitivity. In particular, thermally-activated selective topography equilibration (TASTE) is pursued as a means for fabricating a master grating with the key advantage that it enables blazed groove facets to be patterned in polymeric electron-beam resist over a non-parallel groove layout not limited by substrate crystal structure. Additionally, substrate-conformal imprint lithography (SCIL) is studied as a method for mass manufacturing high-fidelity grating replicas in a silica sol-gel resist while avoiding many of the detriments associated with large-area patterning in other nanoimprint techniques. Diffraction-efficiency testing of sub-micron grating prototypes coated with gold shows that TASTE is capable of meeting Lynx requirements for spectral sensitivity, with room for improvement at small groove periods, and that while SCIL offers a promising avenue for Lynx grating production, imprints suffer a small blaze-angle reduction due to resist shrinkage. Accompanying this dissertation are appendices that outline physics fundamentals for x-ray spectral lines, x-ray optics, and diffraction gratings.
△ Less
Submitted 16 June, 2022; v1 submitted 18 March, 2021;
originally announced March 2021.
-
Fabrication of astronomical x-ray reflection gratings using thermally activated selective topography equilibration
Authors:
Jake A. McCoy,
Randall L. McEntaffer,
Chad M. Eichfeld
Abstract:
Thermally activated selective topography equilibration (TASTE) enables the creation of 3D structures in resist using grayscale electron-beam lithography followed by a thermal treatment to induce a selective polymer reflow. A blazed grating topography can be created by reflowing repeating staircase patterns in resist into wedge-like structures. Motivated by astronomical applications, such patterns…
▽ More
Thermally activated selective topography equilibration (TASTE) enables the creation of 3D structures in resist using grayscale electron-beam lithography followed by a thermal treatment to induce a selective polymer reflow. A blazed grating topography can be created by reflowing repeating staircase patterns in resist into wedge-like structures. Motivated by astronomical applications, such patterns with periodicities 840 nm and 400 nm have been fabricated in 130 nm-thick PMMA using TASTE to provide a base for X-ray reflection gratings. A path forward to integrate this alternative blazing technique into grating fabrication recipes is discussed.
△ Less
Submitted 2 February, 2021;
originally announced February 2021.
-
X-ray verification of sol-gel resist shrinkage in substrate-conformal imprint lithography for a replicated blazed reflection grating
Authors:
Jake A. McCoy,
Marc A. Verschuuren,
Drew M. Miles,
Randall L. McEntaffer
Abstract:
Surface-relief gratings fabricated through nanoimprint lithography (NIL) are prone to topographic distortion induced by resist shrinkage. Characterizing the impact of this effect on blazed diffraction efficiency is particularly important for applications in astrophysical spectroscopy at soft x-ray wavelengths ($λ\approx 0.5 - 5$~nm) that call for the mass-production of large-area grating replicas…
▽ More
Surface-relief gratings fabricated through nanoimprint lithography (NIL) are prone to topographic distortion induced by resist shrinkage. Characterizing the impact of this effect on blazed diffraction efficiency is particularly important for applications in astrophysical spectroscopy at soft x-ray wavelengths ($λ\approx 0.5 - 5$~nm) that call for the mass-production of large-area grating replicas with sub-micron, sawtooth surface-relief profiles. A variant of NIL that lends itself well for this task is substrate-conformal imprint lithography (SCIL), which uses a flexible, composite stamp formed from a rigid master template to imprint nanoscale features in an inorganic resist that cures thermodynamically through a silica sol-gel process. While SCIL enables the production of several hundred imprints before stamp degradation and avoids many of the detriments associated with large-area imprinting in NIL, the sol-gel resist suffers shrinkage dependent on the post-imprint cure temperature. Through atomic force microscopy and diffraction-efficiency testing at beamline 6.3.2 of the Advanced Light Source, the impact of this effect on blaze response is constrained for a $\sim$160-nm-period grating replica cured at 90$^{\circ}$C. Results demonstrate a $\sim$2$^{\circ}$ reduction in blaze angle relative to the master grating, which was fabricated by anisotropic wet etching in $\langle 311 \rangle$-oriented silicon to yield a facet angle close to 30$^{\circ}$.
△ Less
Submitted 27 October, 2020;
originally announced November 2020.
-
Rotational bands beyond the Elliott model
Authors:
Ryan Zbikowski,
Calvin W. Johnson,
Anna E. McCoy,
Mark A. Caprio,
Patrick J. Fasano
Abstract:
Rotational bands are commonplace in the spectra of atomic nuclei. Inspired by early descriptions of these bands by quadrupole deformations of a liquid drop, Elliott constructed a discrete nucleon representations of $\mathrm{SU}(3)$ from fermionic creation and annihilation operators. Ever since, Elliott's model has been foundational to descriptions of rotation in nuclei. Later work, however, sugges…
▽ More
Rotational bands are commonplace in the spectra of atomic nuclei. Inspired by early descriptions of these bands by quadrupole deformations of a liquid drop, Elliott constructed a discrete nucleon representations of $\mathrm{SU}(3)$ from fermionic creation and annihilation operators. Ever since, Elliott's model has been foundational to descriptions of rotation in nuclei. Later work, however, suggested the symplectic extension $\mathrm{Sp}(3,R)$ provides a more unified picture. We decompose no-core shell-model nuclear wave functions into symmetry-defined subspaces for several beryllium isotopes, as well as $^{20}$Ne, using the quadratic Casimirs of both Elliott's $\mathrm{SU}(3)$ and $\mathrm{Sp}(3,R)$. The band structure, delineated by strong $B(E2)$ values, has a more consistent description in $\mathrm{Sp}(3,R)$ rather than $\mathrm{SU}(3)$. {In particular, we confirm previous work finding in some nuclides strongly connected upper and lower bands with the same underlying symplectic structure.
△ Less
Submitted 16 November, 2020;
originally announced November 2020.
-
Microscopic investigation of the $^8$Li($n, γ$)$^9$Li reaction
Authors:
Callum McCracken,
Petr Navratil,
Anna McCoy,
Sofia Quaglioni,
Guillaume Hupin
Abstract:
The $^8$Li($n,γ$)$^9$Li reaction plays an important role in several astrophysics scenarios. It cannot be measured directly and indirect experiments have so far provided only cross section limits. Theoretical predictions differ by an order of magnitude. In this work we study the properties of $^9$Li bound states and low-lying resonances and calculate the $^8$Li($n,γ$)$^9$Li cross section within the…
▽ More
The $^8$Li($n,γ$)$^9$Li reaction plays an important role in several astrophysics scenarios. It cannot be measured directly and indirect experiments have so far provided only cross section limits. Theoretical predictions differ by an order of magnitude. In this work we study the properties of $^9$Li bound states and low-lying resonances and calculate the $^8$Li($n,γ$)$^9$Li cross section within the no-core shell model with continuum (NCSMC) with chiral nucleon-nucleon and three-nucleon interactions as the only input. The NCSMC is an ab initio method applicable to light nuclei that provides a unified description of bound and scattering states well suited to calculate low-energy nuclear scattering and reactions. Our calculations reproduce the experimentally known bound states as well as the lowest $5/2^-$ resonance of $^9$Li. We predict a $3/2^-$ spin-parity assignment for the resonance observed at 5.38 MeV. In addition to the a very narrow $7/2^-$ resonance corresponding presumably to the experimental 6.43 MeV state, we find several other broad low-lying resonances. Our calculated $^8$Li($n,γ$)$^9$Li cross section is within the limits derived from the 1998 National Superconducting Cyclotron Laboratory Coulomb-dissociation experiment [Phys. Rev. C {\bf 57}, 959 (1998)]. However, it is higher than cross sections obtained in recent phenomenological studies. It is dominated by a direct E1 capture to the ground state with a resonant contribution at $\sim0.2$ MeV due to E2/M1 radiation enhanced by the $5/2^-$ resonance.
△ Less
Submitted 10 February, 2021; v1 submitted 1 September, 2020;
originally announced September 2020.
-
Emergent Sp(3,R) dynamical symmetry in the nuclear many-body system from an ab initio description
Authors:
A. E. McCoy,
M. A. Caprio,
T. Dytrych,
P. J. Fasano
Abstract:
Ab initio nuclear theory provides not only a microscopic framework for quantitative description of the nuclear many-body system, but also a foundation for deeper understanding of emergent collective correlations. A symplectic Sp(3,R)$\supset$U(3) dynamical symmetry is identified in ab initio predictions, from a no-core configuration interaction approach, and found to provide a qualitative understa…
▽ More
Ab initio nuclear theory provides not only a microscopic framework for quantitative description of the nuclear many-body system, but also a foundation for deeper understanding of emergent collective correlations. A symplectic Sp(3,R)$\supset$U(3) dynamical symmetry is identified in ab initio predictions, from a no-core configuration interaction approach, and found to provide a qualitative understanding of the spectrum of 7Be. Low-lying states form an Elliott SU(3) spectrum, while an Sp(3,R) excitation gives rise to an excited rotational band with strong quadrupole connections to the ground state band.
△ Less
Submitted 12 August, 2020;
originally announced August 2020.
-
Improving Hamiltonian encodings with the Gray code
Authors:
Olivia Di Matteo,
Anna McCoy,
Peter Gysbers,
Takayuki Miyagi,
R. M. Woloshyn,
Petr Navrátil
Abstract:
Due to the limitations of present-day quantum hardware, it is especially critical to design algorithms that make the best possible use of available resources. When simulating quantum many-body systems on a quantum computer, straightforward encodings that transform many-body Hamiltonians into qubit Hamiltonians use $N$ of the available basis states of an $N$-qubit system, whereas $2^N$ are in theor…
▽ More
Due to the limitations of present-day quantum hardware, it is especially critical to design algorithms that make the best possible use of available resources. When simulating quantum many-body systems on a quantum computer, straightforward encodings that transform many-body Hamiltonians into qubit Hamiltonians use $N$ of the available basis states of an $N$-qubit system, whereas $2^N$ are in theory available. We explore an efficient encoding that uses the entire set of basis states, where terms in the Hamiltonian are mapped to qubit operators with a Hamiltonian that acts on the basis states in Gray code order. This encoding is applied to the commonly-studied problem of finding the ground state energy of a deuteron with a simulated variational quantum eigensolver (VQE). It is compared to a standard "one-hot" encoding, and various trade-offs that arise are analyzed. The energy distribution of VQE solutions has smaller variance than the one obtained by the one-hot encoding even in the presence of simulated hardware noise, despite an increase in the number of measurements. The reduced number of qubits and a shorter-depth variational ansatz enables the encoding of larger problems on current-generation machines. This encoding also demonstrates improvements for simulating time evolution of the same system, producing circuits for the evolution operators with reduced depth and roughly half the number of gates compared to a one-hot encoding.
△ Less
Submitted 30 March, 2021; v1 submitted 11 August, 2020;
originally announced August 2020.
-
Intrinsic operators for the translationally-invariant many-body problem
Authors:
M. A. Caprio,
A. E. McCoy,
P. J. Fasano
Abstract:
The need to enforce fermionic antisymmetry in the nuclear many-body problem commonly requires use of single-particle coordinates, defined relative to some fixed origin. To obtain physical operators which nonetheless act on the nuclear many-body system in a Galilean-invariant fashion, thereby avoiding spurious center-of-mass contributions to observables, it is necessary to express these operators w…
▽ More
The need to enforce fermionic antisymmetry in the nuclear many-body problem commonly requires use of single-particle coordinates, defined relative to some fixed origin. To obtain physical operators which nonetheless act on the nuclear many-body system in a Galilean-invariant fashion, thereby avoiding spurious center-of-mass contributions to observables, it is necessary to express these operators with respect to the translational intrinsic frame. Several commonly-encountered operators in nuclear many-body calculations, including the magnetic dipole and electric quadrupole operators (in the impulse approximation) and generators of SU(3) and Sp(3,R) symmetry groups, are bilinear in the coordinates and momenta of the nucleons and, when expressed in intrinsic form, become two-body operators. To work with such operators in a second-quantized many-body calculation, it is necessary to relate three distinct forms: the defining intrinsic-frame expression, an explicitly two-body expression in terms of two-particle relative coordinates, and a decomposition into one-body and separable two-body parts. We establish the relations between these forms, for general (non-scalar and non-isoscalar) operators bilinear in coordinates and momenta.
△ Less
Submitted 18 August, 2020; v1 submitted 24 April, 2020;
originally announced April 2020.
-
Extreme Ultraviolet and Soft X-Ray Diffraction Efficiency of a Blazed Reflection Grating Fabricated by Thermally Activated Selective Topography Equilibration
Authors:
Jake A. McCoy,
Randall L. McEntaffer,
Drew M. Miles
Abstract:
Future observatories utilizing reflection grating spectrometers for extreme ultraviolet (EUV) and soft X-ray (SXR) spectroscopy require high-fidelity gratings with both blazed groove facets and custom groove layouts that are often fanned or feature a slight curvature. While fabrication procedures centering on wet anisotropic etching in monocrystalline silicon produce highly efficient blazed gratin…
▽ More
Future observatories utilizing reflection grating spectrometers for extreme ultraviolet (EUV) and soft X-ray (SXR) spectroscopy require high-fidelity gratings with both blazed groove facets and custom groove layouts that are often fanned or feature a slight curvature. While fabrication procedures centering on wet anisotropic etching in monocrystalline silicon produce highly efficient blazed gratings, the precision of a nonparallel groove layout is limited by the cubic structure of the silicon crystal. This motivates the pursuit of alternative techniques to grating manufacture, namely thermally activated selective topography equilibration (TASTE), which uses gray-scale electron-beam lithography to pattern multilevel structures in resist followed by an optimized polymer thermal reflow to smooth the 3D patterns into continuous surface relief profiles. Using TASTE, a mold for a reflection grating with a periodicity of 400 nm and grooves resembling an asymmetric sawtooth was patterned in 130 nm thick poly(methyl methacrylate) resist on a silicon substrate over a 50 mm by 7.5 mm area. This structure was coated with 15 nm of gold by electron-beam physical vapor deposition using titanium as an adhesion layer and then tested for EUV and SXR diffraction efficiency at beamline 6.3.2 of the Advanced Light Source synchrotron facility. Results demonstrate a quasi-blaze response characteristic of a 27 degree blaze angle with groove facets smooth to 1.5 nm rms. Absolute peak-order efficiency ranges from 75% to 25%, while total relative efficiency measures gap90% across the measured bandpass of 15.5 nm > lambda > 1.55 nm.
△ Less
Submitted 13 March, 2020;
originally announced March 2020.
-
Ab initio rotation in 10Be
Authors:
M. A. Caprio,
P. J. Fasano,
A. E. McCoy,
P. Maris,
J. P. Vary
Abstract:
Ab initio theory describes nuclei from a fully microscopic formulation, with no presupposition of collective degrees of freedom, yet signatures of clustering and rotation nonetheless arise. We can therefore look to ab initio theory for an understanding of the nature of these emergent phenomena. To probe the nature of rotation in 10Be, we examine the predicted rotational spectroscopy from no-core c…
▽ More
Ab initio theory describes nuclei from a fully microscopic formulation, with no presupposition of collective degrees of freedom, yet signatures of clustering and rotation nonetheless arise. We can therefore look to ab initio theory for an understanding of the nature of these emergent phenomena. To probe the nature of rotation in 10Be, we examine the predicted rotational spectroscopy from no-core configuration interaction (NCCI) calculations with the Daejeon16 internucleon interaction, and find spectra suggestive of coexisting rotational structures having qualitatively different intrinsic deformations: one triaxial and the other with large axial deformation arising primarily from the neutrons.
△ Less
Submitted 12 December, 2019;
originally announced December 2019.
-
Probing ab initio emergence of nuclear rotation
Authors:
M. A. Caprio,
P. J. Fasano,
P. Maris,
A. E. McCoy,
J. P. Vary
Abstract:
Structural phenomena in nuclei, from shell structure and clustering to superfluidity and collective rotations and vibrations, reflect emergent degrees of freedom. Ab initio theory describes nuclei directly from a fully microscopic formulation. We can therefore look to ab initio theory as a means of exploring the emergence of effective degrees of freedom in nuclei. For the illustrative case of emer…
▽ More
Structural phenomena in nuclei, from shell structure and clustering to superfluidity and collective rotations and vibrations, reflect emergent degrees of freedom. Ab initio theory describes nuclei directly from a fully microscopic formulation. We can therefore look to ab initio theory as a means of exploring the emergence of effective degrees of freedom in nuclei. For the illustrative case of emergent rotational bands in the Be isotopes, we establish an understanding of the underlying oscillator space and angular momentum (orbital and spin) structure. We consider no-core configuration interaction (NCCI) calculations for 7,9,11Be with the Daejeon16 internucleon interaction. Although shell model or rotational degrees of freedom are not assumed in the ab initio theory, the NCCI results are suggestive of the emergence of effective shell model degrees of freedom (0 hbar-omega and 2 hbar-omega excitations) and LS-scheme rotational degrees of freedom, consistent with an Elliott-Wilsdon SU(3) description. These results provide some basic insight into the connection between emergent effective collective rotational and shell model degrees of freedom in these light nuclei and the underlying ab initio microscopic description.
△ Less
Submitted 29 November, 2019;
originally announced December 2019.
-
Symplectic no-core configuration interaction framework for ab initio nuclear structure
Authors:
Anna E. McCoy,
Mark A. Caprio,
Tomas Dytrych
Abstract:
We introduce a symplectic no-core configuration interaction (SpNCCI) framework for ab initio nuclear structure calculations, in a correlated many-body basis which encodes an approximate Sp(3,R) symmetry of the nucleus. Such a scheme potentially provides a means of restricting the many-body space to include only those highly-excited configurations which dominantly contribute to the nuclear wave fun…
▽ More
We introduce a symplectic no-core configuration interaction (SpNCCI) framework for ab initio nuclear structure calculations, in a correlated many-body basis which encodes an approximate Sp(3,R) symmetry of the nucleus. Such a scheme potentially provides a means of restricting the many-body space to include only those highly-excited configurations which dominantly contribute to the nuclear wave function. We examine the symplectic symmetry structure arising in an illustrative ab initio SpNCCI calculation for 6Li. We observe both the dominance of symplectic symmetry in individual wave functions and the emergence of families of states related by symplectic symmetry.
△ Less
Submitted 5 February, 2018;
originally announced February 2018.
-
Fluorescence branching ratios and magnetic tuning of the visible spectrum of SrOH
Authors:
Duc-Trung Nguyen,
Timothy C. Steimle,
Ivan Kozyryev,
Meng Huang,
Anne B. McCoy
Abstract:
The magnetic tuning of the low rotational levels in the Xsigma+(0,0,0), Api(0,0,0), and Bsigma+ (0,0,0) electronic states of strontium hydroxide, SrOH, have been experimentally investigated using high resolution optical Zeeman spectroscopy of a cold molecular beam sample. The observed Zeeman shifts and splittings are successfully modeled using a traditional effective Hamiltonian approach to accoun…
▽ More
The magnetic tuning of the low rotational levels in the Xsigma+(0,0,0), Api(0,0,0), and Bsigma+ (0,0,0) electronic states of strontium hydroxide, SrOH, have been experimentally investigated using high resolution optical Zeeman spectroscopy of a cold molecular beam sample. The observed Zeeman shifts and splittings are successfully modeled using a traditional effective Hamiltonian approach to account for the interaction between the Api and Bsigma+ states. The determined magnetic g-factors for the Xsigma+, Api , and Bsigma+ states are compared to those predicted by perturbation theory. The dispersed fluorescence resulting from laser excitation of rotationally resolved branch features of the Bsigma+ (0,0,0)<Xsigma+(0,0,0) Api(0,0,0)< Xsigma+(0,0,0) transitions have been recorded and analyzed. The measured fluorescence branching ratios are compared with Franck-Condon calculations. The required bending motion wave functions are derived using a discrete variable representation (DVR) method. Implications for laser slowing and magneto-optical trap** experiments for SrOH are described.
△ Less
Submitted 21 November, 2017;
originally announced November 2017.
-
The many-nucleon theory of nuclear collective structure and its macroscopic limits: an algebraic perspective
Authors:
D. J. Rowe,
A. E. McCoy,
M. A. Caprio
Abstract:
The nuclear collective models introduced by Bohr, Mottelson and Rainwater, together with the Mayer-Jensen shell model, have provided the central framework for the development of nuclear physics. This paper reviews the microscopic evolution of the collective models and their underlying foundations. In particular, it is shown that the Bohr-Mottelson models have expressions as macroscopic limits of m…
▽ More
The nuclear collective models introduced by Bohr, Mottelson and Rainwater, together with the Mayer-Jensen shell model, have provided the central framework for the development of nuclear physics. This paper reviews the microscopic evolution of the collective models and their underlying foundations. In particular, it is shown that the Bohr-Mottelson models have expressions as macroscopic limits of microscopic models that have precisely-defined expressions in many-nucleon quantum mechanics. Understanding collective models in this way is especially useful because it enables the analysis of nuclear properties in terms of them to be revisited and reassessed in the light of their microscopic foundations.
△ Less
Submitted 14 March, 2017;
originally announced March 2017.
-
Completeness Properties of the open-point and bi-point-open topologies on C(X)
Authors:
Anubha **dal,
R. A. McCoy,
S. Kundu,
Varun **dal
Abstract:
This paper studies various completeness properties of the open-point and bi-point-open topologies on the space C(X) of all real-valued continuous functions on a Tychonoff space X. The properties range from complete metrizability to the Baire space property.
This paper studies various completeness properties of the open-point and bi-point-open topologies on the space C(X) of all real-valued continuous functions on a Tychonoff space X. The properties range from complete metrizability to the Baire space property.
△ Less
Submitted 6 July, 2016;
originally announced July 2016.
-
Algebraic evaluation of matrix elements in the Laguerre function basis
Authors:
A. E. McCoy,
M. A. Caprio
Abstract:
The Laguerre functions constitute one of the fundamental basis sets for calculations in atomic and molecular electron-structure theory, with applications in hadronic and nuclear theory as well. While similar in form to the Coulomb bound-state eigenfunctions (from the Schroedinger eigenproblem) or the Coulomb-Sturmian functions (from a related Sturm-Liouville problem), the Laguerre functions, unlik…
▽ More
The Laguerre functions constitute one of the fundamental basis sets for calculations in atomic and molecular electron-structure theory, with applications in hadronic and nuclear theory as well. While similar in form to the Coulomb bound-state eigenfunctions (from the Schroedinger eigenproblem) or the Coulomb-Sturmian functions (from a related Sturm-Liouville problem), the Laguerre functions, unlike these former functions, constitute a complete, discrete, orthonormal set for square-integrable functions in three dimensions. We construct the SU(1,1)xSO(3) dynamical algebra for the Laguerre functions and apply the ideas of factorization (or supersymmetric quantum mechanics) to derive shift operators for these functions. We use the resulting algebraic framework to derive analytic expressions for matrix elements of several basic radial operators (involving powers of the radial coordinate and radial derivative) in the Laguerre function basis. We illustrate how matrix elements for more general spherical tensor operators in three dimensional space, such as the gradient, may then be constructed from these radial matrix elements.
△ Less
Submitted 16 May, 2016;
originally announced May 2016.
-
The Bi-Compact-Open Topology on C(X)
Authors:
Anubha **dal,
R. A. McCoy,
S. Kundu
Abstract:
For the set C(X) of real-valued continuous functions on a Tychonoff space X, the compact-open topology on C(X) is a "set-open topology". This paper studies the separation and countability properties of the space C(X) having the topology given by the join of the compact-open topology and an "open-set topology" called the open-point topology, that was introduced in [6].
For the set C(X) of real-valued continuous functions on a Tychonoff space X, the compact-open topology on C(X) is a "set-open topology". This paper studies the separation and countability properties of the space C(X) having the topology given by the join of the compact-open topology and an "open-set topology" called the open-point topology, that was introduced in [6].
△ Less
Submitted 6 April, 2016; v1 submitted 17 March, 2016;
originally announced March 2016.
-
Gamma Ray Bursts, The Principle of Relative Locality and Connection Normal Coordinates
Authors:
A. E. McCoy
Abstract:
The launch of the Fermi telescope in 2008 opened up the possibility of measuring the energy dependence of the speed of light by considering the time delay in the arrival of gamma ray bursts emitted simultaneously from very distant sources.The expected time delay between the arrival of gamma rays of significantly different energies as predicted by the framework of relative locality has already been…
▽ More
The launch of the Fermi telescope in 2008 opened up the possibility of measuring the energy dependence of the speed of light by considering the time delay in the arrival of gamma ray bursts emitted simultaneously from very distant sources.The expected time delay between the arrival of gamma rays of significantly different energies as predicted by the framework of relative locality has already been calculated in Riemann normal coordinates. In the following, we calculate the time delay in more generality and then specialize to the connection normal coordinate system as a check that the results are coordinate independent. We also show that this result does not depend on the presence of torsion.
△ Less
Submitted 3 January, 2012;
originally announced January 2012.
-
Unitary representations of the Galilean line group: Quantum mechanical principle of equivalence
Authors:
B. R. MacGregor,
A. E. McCoy,
S. Wickramasekara
Abstract:
We present a formalism of Galilean quantum mechanics in non-inertial reference frames and discuss its implications for the equivalence principle. This extension of quantum mechanics rests on the Galilean line group, the semidirect product of the real line and the group of analytic functions from the real line to the Euclidean group in three dimensions. This group provides transformations between a…
▽ More
We present a formalism of Galilean quantum mechanics in non-inertial reference frames and discuss its implications for the equivalence principle. This extension of quantum mechanics rests on the Galilean line group, the semidirect product of the real line and the group of analytic functions from the real line to the Euclidean group in three dimensions. This group provides transformations between all inertial and non-inertial reference frames and contains the Galilei group as a subgroup. We construct a certain class of unitary representations of the Galilean line group and show that these representations determine the structure of quantum mechanics in non-inertial reference frames. Our representations of the Galilean line group contain the usual unitary projective representations of the Galilei group, but have a more intricate cocycle structure. The transformation formula for the Hamiltonian under the Galilean line group shows that in a non-inertial reference frame it acquires a fictitious potential energy term that is proportional to the inertial mass, suggesting the equivalence of inertial mass and gravitational mass in quantum mechanics.
△ Less
Submitted 12 July, 2011;
originally announced July 2011.
-
Racah's method for general subalgebra chains: Coupling coefficients of SO(5) in canonical and physical bases
Authors:
M. A. Caprio,
K. D. Sviratcheva,
A. E. McCoy
Abstract:
It is shown that the method of infinitesimal generators ("Racah's method") can be broadly and systematically formulated as a method applicable to the calculation of reduced coupling coefficients for a generic subalgebra chain G>H, provided the reduced matrix elements of the generators of G and the recoupling coefficients of H are known. The calculation of SO(5)>SO(4) reduced coupling coefficients…
▽ More
It is shown that the method of infinitesimal generators ("Racah's method") can be broadly and systematically formulated as a method applicable to the calculation of reduced coupling coefficients for a generic subalgebra chain G>H, provided the reduced matrix elements of the generators of G and the recoupling coefficients of H are known. The calculation of SO(5)>SO(4) reduced coupling coefficients is considered as an example, and a procedure for transformation of reduced coupling coefficients between canonical and physical subalegebra chains is presented. The problem of calculating coupling coefficients for generic irreps of SO(5), reduced with respect to any of its subalgebra chains, is completely resolved by this approach.
△ Less
Submitted 14 June, 2010;
originally announced June 2010.