-
Detection and Characterisation of a Coronal Mass Ejection using Interplanetary Scintillation measurements from the Murchison Widefield Array
Authors:
J. Morgan,
P. I. McCauley,
A. Waszewski,
R. Ekers,
R. Chhetri
Abstract:
We have shown previously that the Murchison Widefield Array (MWA), can detect hundreds of Interplanetary Scintillation (IPS) sources simultaneously across a field of view $\sim30^\circ$ in extent. To test if we can use this capability to track heliospheric structures, we undertook a search of 88 hours of MWA IPS data, and identified an observation likely to have a significant Coronal Mass Ejection…
▽ More
We have shown previously that the Murchison Widefield Array (MWA), can detect hundreds of Interplanetary Scintillation (IPS) sources simultaneously across a field of view $\sim30^\circ$ in extent. To test if we can use this capability to track heliospheric structures, we undertook a search of 88 hours of MWA IPS data, and identified an observation likely to have a significant Coronal Mass Ejection (CME) in the field of view. We demonstrate that in a single 5-minute MWA observation we are able to localise and image a CME $\sim$33 hours after launch at an elongation of $\sim37^\circ$ from the Sun. We use IPS observables to constrain the kinematics of the CME, and describe how MWA IPS observations can be used in the future to make a unique contribution to heliospheric modelling efforts.
△ Less
Submitted 16 March, 2023;
originally announced March 2023.
-
Radio Burst and Circular Polarization Studies of the Solar Corona at Low Frequencies
Authors:
Patrick I. McCauley
Abstract:
Low-frequency (80-240 MHz) radio observations of the solar corona are presented using the Murchison Widefield Array (MWA), and several discoveries are reported. The corona is reviewed, followed by chapters on Type III bursts and circularly-polarized quiescent emission. The second chapter details new Type III burst dynamics. One source component at higher frequencies splits into two at lower freque…
▽ More
Low-frequency (80-240 MHz) radio observations of the solar corona are presented using the Murchison Widefield Array (MWA), and several discoveries are reported. The corona is reviewed, followed by chapters on Type III bursts and circularly-polarized quiescent emission. The second chapter details new Type III burst dynamics. One source component at higher frequencies splits into two at lower frequencies, where the two components rapidly diverge. This is attributed to electron beams traversing a divergent magnetic field configuration, which is supported by extreme ultraviolet jet observations outlining a coronal null point. The third chapter uses Type III burst heights as density probes. Harmonic plasma emission implies ~4x enhancements over background models. This can be explained by electron beams traveling along dense fibers or by propagation effects that elevate apparent source heights. The quiescent corona is compared to model predictions to conclude that propagation effects can largely but not entirely explain the apparent density enhancements. The fourth chapter surveys over 100 spectropolarimetric observing runs. Around 700 compact sources are detected with polarization fractions from less than 0.5% to nearly 100%. They are interpreted as plasma emission noise storm sources down to levels not previously observable. A "bullseye" structure is reported for coronal holes, where an outer ring surrounds an oppositely-polarized central component that does not match the sign expected of thermal bremsstrahlung. The large-scale polarization structure is shown to be well-correlated with that of a global magnetic field model. The last chapter summarizes results and outlines future work. A preliminary comparison of polarization images to model predictions is shared, along with coronal mass ejection observations revealing a radio arc that is morphologically similar to the white-light structure.
△ Less
Submitted 3 December, 2019;
originally announced December 2019.
-
Comprehensive Characterization of Solar Eruptions With Remote and In-Situ Observations, and Modeling: The Major Solar Events on 4 November 2015
Authors:
Iver H. Cairns,
Kamen A. Kozarev,
Nariaki V. Nitta,
Neus Agueda,
Markus Battarbee,
Eoin P. Carley,
Nina Dresing,
Raul Gomez-Herrero,
Karl-Ludwig Klein,
David Lario,
Jens Pomoell,
Carolina Salas-Matamoros,
Astrid M. Veronig,
Bo Li,
Patrick McCauley
Abstract:
Solar energetic particles (SEPs) are an important product of solar activity. They are connected to solar active regions and flares, coronal mass ejections (CMEs), EUV waves, shocks, Type II and III radio emissions, and X-ray bursts. These phenomena are major probes of the partition of energy in solar eruptions, as well as for the organization, dynamics, and relaxation of coronal and interplanetary…
▽ More
Solar energetic particles (SEPs) are an important product of solar activity. They are connected to solar active regions and flares, coronal mass ejections (CMEs), EUV waves, shocks, Type II and III radio emissions, and X-ray bursts. These phenomena are major probes of the partition of energy in solar eruptions, as well as for the organization, dynamics, and relaxation of coronal and interplanetary magnetic fields. Many of these phenomena cause terrestrial space weather, posing multiple hazards for humans and their technology from space to the ground. Since particular flares, shocks, CMEs, and EUV waves produce SEP events but others do not, since propagation effects from the low corona to 1 AU appear important for some events but not others, and since Type II and III radio emissions and X-ray bursts are sometimes produced by energetic particles leaving these acceleration sites, it is necessary to study the whole system with a multi-frequency and multi-instrument perspective that combines both in-situ and remote observations with detailed modelling of phenomena. This article demonstrates this comprehensive approach, and shows its necessity, by analysing a trio of unusual and striking solar eruptions, radio and X-ray bursts, and SEP events that occurred on 4 November 2015. These events show both strong similarities and differences from standard events and each other, despite having very similar interplanetary conditions and only two are sites and CME genesis regions. They are therefore major targets for further in-depth observational studies, and for testing both existing and new theories and models. Based on the very limited modelling available we identify the aspects that are and are not understood, and we discuss ideas that may lead to improved understanding of the SEP, radio, and space-weather events.
△ Less
Submitted 8 October, 2019;
originally announced October 2019.
-
Science with the Murchison Widefield Array: Phase I Results and Phase II Opportunities
Authors:
A. P. Beardsley,
M. Johnston-Hollitt,
C. M. Trott,
J. C. Pober,
J. Morgan,
D. Oberoi,
D. L. Kaplan,
C. R. Lynch,
G. E. Anderson,
P. I. McCauley,
S. Croft,
C. W. James,
O. I. Wong,
C. D. Tremblay,
R. P. Norris,
I. H. Cairns,
C. J. Lonsdale,
P. J. Hancock,
B. M. Gaensler,
N. D. R. Bhat,
W. Li,
N. Hurley-Walker,
J. R. Callingham,
N. Seymour,
S. Yoshiura
, et al. (34 additional authors not shown)
Abstract:
The Murchison Widefield Array (MWA) is an open access telescope dedicated to studying the low frequency (80$-$300 MHz) southern sky. Since beginning operations in mid 2013, the MWA has opened a new observational window in the southern hemisphere enabling many science areas. The driving science objectives of the original design were to observe 21\,cm radiation from the Epoch of Reionisation (EoR),…
▽ More
The Murchison Widefield Array (MWA) is an open access telescope dedicated to studying the low frequency (80$-$300 MHz) southern sky. Since beginning operations in mid 2013, the MWA has opened a new observational window in the southern hemisphere enabling many science areas. The driving science objectives of the original design were to observe 21\,cm radiation from the Epoch of Reionisation (EoR), explore the radio time domain, perform Galactic and extragalactic surveys, and monitor solar, heliospheric, and ionospheric phenomena. All together 60$+$ programs recorded 20,000 hours producing 146 papers to date. In 2016 the telescope underwent a major upgrade resulting in alternating compact and extended configurations. Other upgrades, including digital back-ends and a rapid-response triggering system, have been developed since the original array was commissioned. In this paper we review the major results from the prior operation of the MWA, and then discuss the new science paths enabled by the improved capabilities. We group these science opportunities by the four original science themes, but also include ideas for directions outside these categories.
△ Less
Submitted 7 October, 2019;
originally announced October 2019.
-
The Low-Frequency Solar Corona in Circular Polarization
Authors:
Patrick I. McCauley,
Iver H. Cairns,
Stephen M. White,
Surajit Mondal,
Emil Lenc,
John Morgan,
Divya Oberoi
Abstract:
We present spectropolarimetric imaging observations of the solar corona at low frequencies (80 - 240 MHz) using the Murchison Widefield Array (MWA). These images are the first of their kind, and we introduce an algorithm to mitigate an instrumental artefact by which the total intensity signal contaminates the polarimetric images due to calibration errors. We then survey the range of circular polar…
▽ More
We present spectropolarimetric imaging observations of the solar corona at low frequencies (80 - 240 MHz) using the Murchison Widefield Array (MWA). These images are the first of their kind, and we introduce an algorithm to mitigate an instrumental artefact by which the total intensity signal contaminates the polarimetric images due to calibration errors. We then survey the range of circular polarization (Stokes V) features detected in over 100 observing runs near solar maximum during quiescent periods. First, we detect around 700 compact polarized sources across our dataset with polarization fractions ranging from less than 0.5% to nearly 100%. These sources exhibit a positive correlation between polarization fraction and total intensity, and we interpret them as a continuum of plasma emission noise storm (Type I burst) continua sources associated with active regions. Second, we report a characteristic "bullseye" structure observed for many low-latitude coronal holes in which a central polarized component is surrounded by a ring of the opposite sense. The central component does not match the sign expected from thermal bremsstrahlung emission, and we speculate that propagation effects or an alternative emission mechanism may be responsible. Third, we show that the large-scale polarimetric structure at our lowest frequencies is reasonably well-correlated with the line-of-sight (LOS) magnetic field component inferred from a global potential field source surface (PFSS) model. The boundaries between opposite circular polarization signs are generally aligned with polarity inversion lines in the model at a height roughly corresponding to that of the radio limb. This is not true at our highest frequencies, however, where the LOS magnetic field direction and polarization sign are often not straightforwardly correlated.
△ Less
Submitted 25 July, 2019;
originally announced July 2019.
-
A weak coronal heating event associated with periodic particle acceleration episodes
Authors:
Atul Mohan,
Patrick I. McCauley,
Alpha Mastrano,
Divya Oberoi
Abstract:
Weak heating events are frequent and ubiquitous in solar corona. They derive their energy from the local magnetic field and form a major source of local heating, signatures of which are seen in EUV and X-ray bands. Their radio emission arise from various plasma instabilities that lead to coherent radiation, making even a weak flare appear very bright. The radio observations hence probe non-equilib…
▽ More
Weak heating events are frequent and ubiquitous in solar corona. They derive their energy from the local magnetic field and form a major source of local heating, signatures of which are seen in EUV and X-ray bands. Their radio emission arise from various plasma instabilities that lead to coherent radiation, making even a weak flare appear very bright. The radio observations hence probe non-equilibrium dynamics providing complementary information on plasma evolution. However, a robust study of radio emission from a weak event among many simultaneous events, requires high dynamic range imaging at sub-second andsub-MHz resolutions owing to their high spectro-temporal variability. Such observations were not possible until recently.This is among the first spatially resolved studies of an active region loop hosting a transient brightening (ARTB) and dynamically linked to a metrewave type-I noise storm. It uses imaging observations at metrewave, EUV and X-ray bands, along with magnetogram data. We believe this is the first spectroscopic radio imaging study of a type-I source, the data for which was obtained using the Murchison Widefield Array. We report the discovery of 30 s quasi-periodic oscillations (QPOs) in the radio light curve, riding on a coherent baseline flux. The strength of the QPOs and the baseline flux enhanced during a mircoflare associated with the ARTB. Our observations suggest a scenario where magnetic stress builds up over an Alfvén timescale (30s) across the typical magnetic field braiding scale and then dissipates via a cascade of weak reconnection events.
△ Less
Submitted 24 July, 2019; v1 submitted 27 February, 2019;
originally announced February 2019.
-
Nonlinear force-free modeling of flare-related magnetic field changes at the photosphere and chromosphere
Authors:
Lucia Kleint,
Michael S. Wheatland,
Alpha Mastrano,
Patrick I. McCauley
Abstract:
Rapid and stepwise changes of the magnetic field are often observed during flares but cannot be explained by models yet. Using a 45 min sequence of SDO/HMI 135 s fast-cadence vector magnetograms of the X1 flare on 2014-03-29 we construct, at each timestep, nonlinear force-free models for the coronal magnetic field. Observed flare-related changes in the line-of-sight magnetic field $B_{\rm LOS}$ at…
▽ More
Rapid and stepwise changes of the magnetic field are often observed during flares but cannot be explained by models yet. Using a 45 min sequence of SDO/HMI 135 s fast-cadence vector magnetograms of the X1 flare on 2014-03-29 we construct, at each timestep, nonlinear force-free models for the coronal magnetic field. Observed flare-related changes in the line-of-sight magnetic field $B_{\rm LOS}$ at the photosphere and chromosphere are compared with changes in the magnetic fields in the models. We find a moderate agreement at the photospheric layer (the basis for the models), but no agreement at chromospheric layers. The observed changes at the photosphere and chromosphere are surprisingly different, and are unlikely to be reproduced by a force-free model. The observed changes are likely to require a change in the magnitude of the field, not just in its direction.
△ Less
Submitted 21 August, 2018;
originally announced August 2018.
-
Densities Probed by Coronal Type III Radio Burst Imaging
Authors:
Patrick I. McCauley,
Iver H. Cairns,
John Morgan
Abstract:
We present coronal density profiles derived from low-frequency (80-240 MHz) imaging of three type III solar radio bursts observed at the limb by the Murchison Widefield Array (MWA). Each event is associated with a white light streamer at larger heights and is plausibly associated with thin extreme ultraviolet rays at lower heights. Assuming harmonic plasma emission, we find average electron densit…
▽ More
We present coronal density profiles derived from low-frequency (80-240 MHz) imaging of three type III solar radio bursts observed at the limb by the Murchison Widefield Array (MWA). Each event is associated with a white light streamer at larger heights and is plausibly associated with thin extreme ultraviolet rays at lower heights. Assuming harmonic plasma emission, we find average electron densities of 1.8 x10^8 cm^-3 down to 0.20 x10^8 cm^-3 at heights of 1.3 to 1.9 solar radii. These values represent roughly 2.4-5.4x enhancements over canonical background levels and are comparable to the highest streamer densities obtained from data at other wavelengths. Assuming fundamental emission instead would increase the densities by a factor of 4. High densities inferred from type III source heights can be explained by assuming that the exciting electron beams travel along overdense fibers or by radio propagation effects that may cause a source to appear at a larger height than the true emission site. We review the arguments for both scenarios in light of recent results. We compare the extent of the quiescent corona to model predictions to estimate the impact of propagation effects, which we conclude can only partially explain the apparent density enhancements. Finally, we use the time- and frequency-varying source positions to estimate electron beam speeds of between 0.24 and 0.60 c.
△ Less
Submitted 15 August, 2018;
originally announced August 2018.
-
Solar Imaging using Low Frequency Arrays
Authors:
C. Lonsdale,
L. Benkevitch,
I. Cairns,
M. Crowley,
P. Erickson,
M. Knapp,
K. Kozarev,
F. Lind,
P. McCauley,
J. Morgan,
D. Oberoi
Abstract:
Low frequency imaging radio arrays such as MWA, LWA and LOFAR have been recently commissioned, and significantly more advanced and flexible arrays are planned for the near term. These powerful instruments offer new opportunities for direct solar imaging at high time and frequency resolution. They can also probe large volumes of the heliosphere simultaneously, by virtue of very large fields of view…
▽ More
Low frequency imaging radio arrays such as MWA, LWA and LOFAR have been recently commissioned, and significantly more advanced and flexible arrays are planned for the near term. These powerful instruments offer new opportunities for direct solar imaging at high time and frequency resolution. They can also probe large volumes of the heliosphere simultaneously, by virtue of very large fields of view. They allow highly detailed, spatially resolved study of solar and heliospheric radio bursts, which are complemented by heliospheric propagation studies using both background astronomical radio emissions as well as the bursts themselves.
In this paper, the state of the art in such wide field solar and heliospheric radio studies is summarized, including recent results from the Murchison Widefield Array (MWA). The prospects for major advances in observational capabilities in the near future are reviewed, with particular emphasis on the RAPID system developed at Haystack Observatory
△ Less
Submitted 5 February, 2018;
originally announced February 2018.
-
Type III Solar Radio Burst Source Region Splitting Due to a Quasi-Separatrix Layer
Authors:
Patrick I. McCauley,
Iver H. Cairns,
John Morgan,
Sarah E. Gibson,
James C. Harding,
Colin Lonsdale,
Divya Oberoi
Abstract:
We present low-frequency (80-240 MHz) radio imaging of type III solar radio bursts observed by the Murchison Widefield Array (MWA) on 2015/09/21. The source region for each burst splits from one dominant component at higher frequencies into two increasingly-separated components at lower frequencies. For channels below ~132 MHz, the two components repetitively diverge at high speeds (0.1-0.4 c) alo…
▽ More
We present low-frequency (80-240 MHz) radio imaging of type III solar radio bursts observed by the Murchison Widefield Array (MWA) on 2015/09/21. The source region for each burst splits from one dominant component at higher frequencies into two increasingly-separated components at lower frequencies. For channels below ~132 MHz, the two components repetitively diverge at high speeds (0.1-0.4 c) along directions tangent to the limb, with each episode lasting just ~2 s. We argue that both effects result from the strong magnetic field connectivity gradient that the burst-driving electron beams move into. Persistence map** of extreme ultraviolet (EUV) jets observed by the Solar Dynamics Observatory reveals quasi-separatrix layers (QSLs) associated with coronal null points, including separatrix dome, spine, and curtain structures. Electrons are accelerated at the flare site toward an open QSL, where the beams follow diverging field lines to produce the source splitting, with larger separations at larger heights (lower frequencies). The splitting motion within individual frequency bands is interpreted as a projected time-of-flight effect, whereby electrons traveling along the outer field lines take slightly longer to excite emission at adjacent positions. Given this interpretation, we estimate an average beam speed of 0.2 c. We also qualitatively describe the quiescent corona, noting in particular that a disk-center coronal hole transitions from being dark at higher frequencies to bright at lower frequencies, turning over around 120 MHz. These observations are compared to synthetic images based on the Magnetohydrodynamic Algorithm outside a Sphere (MAS) model, which we use to flux-calibrate the burst data.
△ Less
Submitted 13 November, 2017;
originally announced November 2017.
-
The challenges of low-frequency radio polarimetry: lessons from the Murchison Widefield Array
Authors:
Emil Lenc,
C. S. Anderson,
N. Barry,
J. D. Bowman,
I. H. Cairns,
J. S. Farnes,
B. M. Gaensler,
G. Heald,
M. Johnston-Hollitt,
D. L. Kaplan,
C. R. Lynch,
P. I. McCauley,
D. A. Mitchell,
J. Morgan,
M. F. Morales,
T. Murphy,
A. R. Offringa,
S. M. Ord,
B. Pindor,
C. Riseley,
E. M. Sadler,
C. Sobey,
M. Sokolowski,
I. S. Sullivan,
S. P. O'Sullivan
, et al. (4 additional authors not shown)
Abstract:
We present techniques developed to calibrate and correct Murchison Widefield Array (MWA) low frequency (72-300 MHz) radio observations for polarimetry. The extremely wide field-of-view, excellent instantaneous (u, v)-coverage and sensitivity to degree-scale structure that the MWA provides enable instrumental calibration, removal of instrumental artefacts, and correction for ionospheric Faraday rot…
▽ More
We present techniques developed to calibrate and correct Murchison Widefield Array (MWA) low frequency (72-300 MHz) radio observations for polarimetry. The extremely wide field-of-view, excellent instantaneous (u, v)-coverage and sensitivity to degree-scale structure that the MWA provides enable instrumental calibration, removal of instrumental artefacts, and correction for ionospheric Faraday rotation through imaging techniques. With the demonstrated polarimetric capabilities of the MWA, we discuss future directions for polarimetric science at low frequencies to answer outstanding questions relating to polarised source counts, source depolarisation, pulsar science, low-mass stars, exoplanets, the nature of the interstellar and intergalactic media, and the solar environment.
△ Less
Submitted 18 August, 2017;
originally announced August 2017.
-
Evolution of Flare Ribbons, Electric Currents and Quasi-separatrix Layers During an X-class Flare
Authors:
M. Janvier,
A. Savcheva,
E. Pariat,
S. Tassev,
S. Millholland,
V. Bommier,
P. McCauley,
S. McKillop,
F. Dougan
Abstract:
The standard model for eruptive flares has in the past few years been extended to 3D. It predicts typical J-shaped photospheric footprints of the coronal current layer, forming at similar locations as the Quasi-Separatrix Layers (QSLs). Such a morphology is also found for flare ribbons observed in the EUV band, as well as in non-linear force-free field (NLFFF) magnetic field extrapolations and mod…
▽ More
The standard model for eruptive flares has in the past few years been extended to 3D. It predicts typical J-shaped photospheric footprints of the coronal current layer, forming at similar locations as the Quasi-Separatrix Layers (QSLs). Such a morphology is also found for flare ribbons observed in the EUV band, as well as in non-linear force-free field (NLFFF) magnetic field extrapolations and models. We study the evolution of the photospheric traces of the current density and flare ribbons, both obtained with the SDO instruments. We investigate the photospheric current evolution during the 6 September 2011 X-class flare (SOL2011-09-06T22:20) from observational data of the magnetic field obtained with HMI. This evolution is compared with that of the flare ribbons observed in the EUV filters of the AIA. We also compare the observed electric current density and the flare ribbon morphology with that of the QSLs computed from the flux rope insertion method/NLFFF model.
The NLFFF model shows the presence of a fan-spine configuration of overlying field lines, due to the presence of a parasitic polarity, embedding an elongated flux rope that appears in the observations as two parts of a filament. The QSLs, evolved via a magnetofrictional method, also show similar morphology and evolution as both the current ribbons and the EUV flare ribbons obtained at several times during the flare. For the first time, we propose a combined analysis of the photospheric traces of an eruptive flare, in a complex topology, with direct measurements of electric currents and QSLs from observational data and a magnetic field model. The results, obtained by two different and independent approaches, 1) confirm previous results of current increase during the impulsive phase of the flare, 2) show how NLFFF models can capture the essential physical signatures of flares even in a complex magnetic field topology.
△ Less
Submitted 25 April, 2016;
originally announced April 2016.
-
The Relation between Solar Eruption Topologies and Observed Flare Features I: Flare Ribbons
Authors:
A. Savcheva,
E. Pariat,
S. McKillop,
P. McCauley,
E. Hanson,
Y. Su,
E. Werner,
E. E. DeLuca
Abstract:
In this paper we present a topological magnetic field investigation of seven two-ribbon flares in sigmoidal active regions observed with Hinode, STEREO, and SDO. We first derive the 3D coronal magnetic field structure of all regions using marginally unstable 3D coronal magnetic field models created with the flux rope insertion method. The unstable models have been shown to be a good model of the f…
▽ More
In this paper we present a topological magnetic field investigation of seven two-ribbon flares in sigmoidal active regions observed with Hinode, STEREO, and SDO. We first derive the 3D coronal magnetic field structure of all regions using marginally unstable 3D coronal magnetic field models created with the flux rope insertion method. The unstable models have been shown to be a good model of the flaring magnetic field configurations. Regions are selected based on their pre-flare configurations along with the appearance and observational coverage of flare ribbons, and the model is constrained using pre-flare features observed in extreme ultraviolet and X-ray passbands. We perform a topology analysis of the models by computing the squashing factor, Q, in order to determine the locations of prominent quasi-separatrix layers (QSLs). QSLs from these maps are compared to flare ribbons at their full extents. We show that in all cases the straight segments of the two J-shaped ribbons are matched very well by the flux-rope-related QSLs, and the matches to the hooked segments are less consistent but still good for most cases. In addition, we show that these QSLs overlay ridges in the electric current density maps. This study is the largest sample of regions with QSLs derived from 3D coronal magnetic field models, and it shows that the magnetofrictional modeling technique that we employ gives a very good representation of flaring regions, with the power to predict flare ribbon locations in the event of a flare following the time of the model.
△ Less
Submitted 10 June, 2015;
originally announced June 2015.
-
Direct Observations of Magnetic Reconnection Outflow and CME Triggering in a Small Erupting Solar Prominence
Authors:
Katharine K. Reeves,
Patrick I. McCauley,
Hui Tian
Abstract:
We examine a small prominence eruption that occurred on 2014 May 1 at 01:35 UT and was observed by the Interface Region Imaging Spectrometer (IRIS) and the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory (SDO). Pre- and post-eruption images were taken by the X-Ray Telescope (XRT) on Hinode. Pre-eruption, a dome-like structure exists above the prominence, as demarcated by coron…
▽ More
We examine a small prominence eruption that occurred on 2014 May 1 at 01:35 UT and was observed by the Interface Region Imaging Spectrometer (IRIS) and the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory (SDO). Pre- and post-eruption images were taken by the X-Ray Telescope (XRT) on Hinode. Pre-eruption, a dome-like structure exists above the prominence, as demarcated by coronal rain. As the eruption progresses, we find evidence for reconnection between the prominence magnetic field and the overlying field. Fast flows are seen in AIA and IRIS, indicating reconnection outflows. Plane-of-sky flows of ~300 km s$^{-1}$ are observed in the AIA 171 A channel along a potentially reconnected field line. IRIS detects intermittent fast line-of-sight flows of ~200 km s$^{-1}$ coincident with the AIA flows. Differential emission measure calculations show heating at the origin of the fast flows. Post-eruption XRT images show hot loops probably due to reconfiguration of magnetic fields during the eruption and subsequent heating of plasma in these loops. Although there is evidence for reconnection above the prominence during the eruption, high spatial resolution images from IRIS reveal potential reconnection sites below the prominence. A height-time analysis of the erupting prominence shows a slow initial rise with a velocity of ~0.4 km s$^{-1}$ followed by a rapid acceleration with a final velocity of ~250 km s$^{-1}$. Brightenings in IRIS during the transition between these two phases indicate the eruption trigger for the fast part of the eruption is likely a tether-cutting mechanism rather than a break-out mechanism.
△ Less
Submitted 27 May, 2015;
originally announced May 2015.
-
Magnetic Structure and Dynamics of the Erupting Solar Polar Crown Prominence on 2012 March 12
Authors:
Yingna Su,
Adriaan van Ballegooijen,
Patrick I. McCauley,
Haisheng Ji,
Katharine K. Reeves,
Edward E. DeLuca
Abstract:
We present an investigation of the polar crown prominence that erupted on 2012 March 12. This prominence is observed at the southeast limb by SDO/AIA (end-on view) and displays a quasi vertical-thread structure. Bright U-shape/horn-like structure is observed surrounding the upper portion of the prominence at 171 angstrom before the eruption and becomes more prominent during the eruption. The disk…
▽ More
We present an investigation of the polar crown prominence that erupted on 2012 March 12. This prominence is observed at the southeast limb by SDO/AIA (end-on view) and displays a quasi vertical-thread structure. Bright U-shape/horn-like structure is observed surrounding the upper portion of the prominence at 171 angstrom before the eruption and becomes more prominent during the eruption. The disk view of STEREO-B shows that this long prominence is composed of a series of vertical threads and displays a half loop-like structure during the eruption. We focus on the magnetic support of the prominence vertical threads by studying the structure and dynamics of the prominence before and during the eruption using observations from SDO and STEREO-B. We also construct a series of magnetic field models (sheared arcade model, twisted flux rope model, and unstable model with hyperbolic flux tube (HFT)). Various observational characteristics appear to be in favor of the twisted flux rope model. We find that the flux rope supporting the prominence enters the regime of torus instability at the onset of the fast rise phase, and signatures of reconnection (post-eruption arcade, new U-shape structure, rising blobs) appear about one hour later. During the eruption, AIA observes dark ribbons seen in absorption at 171 angstrom corresponding to the bright ribbons shown at 304 angstrom, which might be caused by the erupting filament material falling back along the newly reconfigured magnetic fields. Brightenings at the inner edge of the erupting prominence arcade are also observed in all AIA EUV channels, which might be caused by the heating due to energy released from reconnection below the rising prominence.
△ Less
Submitted 26 May, 2015;
originally announced May 2015.
-
Prominence and Filament Eruptions Observed by the Solar Dynamics Observatory: Statistical Properties, Kinematics, and Online Catalog
Authors:
Patrick I. McCauley,
Yingna Su,
Nicole Schanche,
Kaitlin E. Evans,
Chuan Su,
Sean McKillop,
Katharine K. Reeves
Abstract:
We present a statistical study of prominence and filament eruptions observed by the Atmospheric Imaging Assembly (AIA) aboard the Solar Dynamics Observatory (SDO). Several properties are recorded for 904 events that were culled from the Heliophysics Event Knowledgebase (HEK) and incorporated into an online catalog for general use. These characteristics include the filament and eruption type, erupt…
▽ More
We present a statistical study of prominence and filament eruptions observed by the Atmospheric Imaging Assembly (AIA) aboard the Solar Dynamics Observatory (SDO). Several properties are recorded for 904 events that were culled from the Heliophysics Event Knowledgebase (HEK) and incorporated into an online catalog for general use. These characteristics include the filament and eruption type, eruption symmetry and direction, apparent twisting and writhing motions, and the presence of vertical threads and coronal cavities. Associated flares and white-light coronal mass ejections (CME) are also recorded. Total rates are given for each property along with how they differ among filament types. We also examine the kinematics of 106 limb events to characterize the distinct slow- and fast-rise phases often exhibited by filament eruptions. The average fast-rise onset height, slow-rise duration, slow-rise velocity, maximum field-of-view (FOV) velocity, and maximum FOV acceleration are 83 Mm, 4.4 hours, 2.1 km/s, 106 km/s, and 111 m/s^2, respectively. All parameters exhibit lognormal probability distributions similar to that of CME speeds. A positive correlation between latitude and fast-rise onset height is found, which we attribute to a corresponding negative correlation in the average vertical magnetic field gradient, or decay index, estimated from potential field source surface (PFSS) extrapolations. We also find the decay index at the fast-rise onset point to be 1.1 on average, consistent with the critical instability threshold theorized for straight current channels. Finally, we explore relationships between the derived kinematics properties and apparent twisting motions. We find that events with evident twist have significantly faster CME speeds and significantly lower fast-rise onset heights, suggesting relationships between these values and flux rope helicity.
△ Less
Submitted 8 May, 2015;
originally announced May 2015.
-
Prevalence of Small-scale Jets from the Networks of the Solar Transition Region and Chromosphere
Authors:
H. Tian,
E. E. DeLuca,
S. R. Cranmer,
B. De Pontieu,
H. Peter,
J. Martínez-Sykora,
L. Golub,
S. McKillop,
K. K. Reeves,
M. P. Miralles,
P. McCauley,
S. Saar,
P. Testa,
M. Weber,
N. Murphy,
J. Lemen,
A. Title,
P. Boerner,
N. Hurlburt,
T. D. Tarbell,
J. P. Wuelser,
L. Kleint,
C. Kankelborg,
S. Jaeggli,
M. Carlsson
, et al. (2 additional authors not shown)
Abstract:
As the interface between the Sun's photosphere and corona, the chromosphere and transition region play a key role in the formation and acceleration of the solar wind. Observations from the Interface Region Imaging Spectrograph reveal the prevalence of intermittent small-scale jets with speeds of 80-250 km/s from the narrow bright network lanes of this interface region. These jets have lifetimes of…
▽ More
As the interface between the Sun's photosphere and corona, the chromosphere and transition region play a key role in the formation and acceleration of the solar wind. Observations from the Interface Region Imaging Spectrograph reveal the prevalence of intermittent small-scale jets with speeds of 80-250 km/s from the narrow bright network lanes of this interface region. These jets have lifetimes of 20-80 seconds and widths of 300 km or less. They originate from small-scale bright regions, often preceded by footpoint brightenings and accompanied by transverse waves with ~20 km/s amplitudes. Many jets reach temperatures of at least ~100000 K and constitute an important element of the transition region structures. They are likely an intermittent but persistent source of mass and energy for the solar wind.
△ Less
Submitted 22 December, 2014; v1 submitted 22 October, 2014;
originally announced October 2014.
-
The Solar Corona as probed by Comet Lovejoy (C/2011 W3)
Authors:
J. C. Raymond,
P. I. McCauley,
S. R. Cranmer,
C. Downs
Abstract:
EUV images of Comet Lovejoy (C/2011 W3) from the AIA show striations related to the magnetic field structure in both open and closed magnetic regions. The brightness contrast implies coronal density contrasts of at least a factor of 6 between neighboring flux tubes over scales of a few thousand km. These density structures imply variations in the Alfven speed on a similar scale. They will drastica…
▽ More
EUV images of Comet Lovejoy (C/2011 W3) from the AIA show striations related to the magnetic field structure in both open and closed magnetic regions. The brightness contrast implies coronal density contrasts of at least a factor of 6 between neighboring flux tubes over scales of a few thousand km. These density structures imply variations in the Alfven speed on a similar scale. They will drastically affect the propagation and dissipation of Alfven waves, and that should be taken into account in models of coronal heating and solar wind acceleration. In each striation, the cometary emission moves along the magnetic field and broadens with time. The speed and the rate of broadening are related to the parallel and perpendicular components of the velocities of the cometary neutrals when they become ionized. We use an MHD model of the coronal magnetic field and the theory of pickup ions to compare the measurements with theoretical predictions, in particular with the energy lost to Alfven waves as the cometary ions isotropize.
△ Less
Submitted 7 May, 2014;
originally announced May 2014.
-
EUV and X-Ray Observations of Comet Lovejoy (C/2011 W3) in the Lower Corona
Authors:
Patrick I. McCauley,
Steven H. Saar,
John C. Raymond,
Yuan-Kuen Ko,
Pascal Saint-Hilaire
Abstract:
We present an analysis of EUV and soft X-ray emission detected toward Comet Lovejoy (C/2011 W3) during its post-perihelion traverse of the solar corona on December 16, 2011. Observations were recorded by the Atmospheric Imaging Assembly (AIA) aboard the Solar Dynamics Observatory and the X-Ray Telescope (XRT) aboard Hinode. A single set of contemporaneous images is explored in detail, along with p…
▽ More
We present an analysis of EUV and soft X-ray emission detected toward Comet Lovejoy (C/2011 W3) during its post-perihelion traverse of the solar corona on December 16, 2011. Observations were recorded by the Atmospheric Imaging Assembly (AIA) aboard the Solar Dynamics Observatory and the X-Ray Telescope (XRT) aboard Hinode. A single set of contemporaneous images is explored in detail, along with prefatory consideration for time evolution using only the 171 A data. For each of the eight passbands, we characterize the emission and derive outgassing rates where applicable. As material sublimates from the nucleus and is immersed in coronal plasma, it rapidly ionizes through charge states seldom seen in this environment. The AIA data show four stages of oxygen ionization (O III - O VI) along with C IV, while XRT likely captured emission from O VII, a line typical of the corona. With a nucleus of at least several hundred meters upon approach to a perihelion that brought the comet to within 0.2 solar radii of the photosphere, Lovejoy was the most significant sungrazer in recent history. Correspondingly high outgassing rates on the order of 10^32.5 oxygen atoms per second are estimated. Assuming that the neutral oxygen comes from water, this translates to a mass-loss rate of about 9.5E9 g/s, and based only on the 171 A observations, we find a total mass loss of approximately 10^13 g over the AIA egress. Additional and supporting analyses include a differential emission measure to characterize the coronal environment, consideration for the opening angle, and a comparison of the emission's leading edge with the expected position of the nucleus.
△ Less
Submitted 4 April, 2013;
originally announced April 2013.
-
Dynamics of the Transition corona
Authors:
Sophie Masson,
Patrick McCauley,
Leon Golub,
Katharine K. Reeves,
Ed DeLuca
Abstract:
Magnetic reconnection between open and closed magnetic field in the corona is believed to play a crucial role in the corona/heliosphere coupling. At large scale, the exchange of open/closed connectivity is expected to occur in pseudo-streamer structures. However, there is neither clear observational evidence of how such coupling occurs in pseudo-streamers, nor evidence for how the magnetic reconne…
▽ More
Magnetic reconnection between open and closed magnetic field in the corona is believed to play a crucial role in the corona/heliosphere coupling. At large scale, the exchange of open/closed connectivity is expected to occur in pseudo-streamer structures. However, there is neither clear observational evidence of how such coupling occurs in pseudo-streamers, nor evidence for how the magnetic reconnection evolves. Using a newly-developed technique, we enhance the off-limb magnetic fine structures observed with AIA and identify a pseudo-streamer-like feature located close to the northern coronal hole. After extrapolating the magnetic field with the PFSS model, we obtain a pseudo-streamer magnetic topology, null-point related topology bounded by open field. We compare the magnetic configuration with the UV observations and identify the magnetic structures expected to be involved in the event. Using an 3D MHD simulation of interchange reconnection, we showed that the evolution of the UV structures follows the magnetic field dynamics and the UV emitting structures have a pattern very similar to the plasma emission derived from the simulation. Our results highlight that the exchange between open and closed in the pseudo-streamer topology related to an observed event occurs at least partially at the null-point, similarly to the interchange reconnection in a single null-point topology. However, our results also indicate that the interchange reconnection in pseudo-streamers is a gradual physical process which opposes to the impulsive reconnection of the solar-jet model.
△ Less
Submitted 5 March, 2014; v1 submitted 4 January, 2013;
originally announced January 2013.
-
Small distance expansion for radiative heat transfer between curved objects
Authors:
Vladyslav A. Golyk,
Matthias Krüger,
Alexander P. McCauley,
Mehran Kardar
Abstract:
We develop a small distance expansion for the radiative heat transfer between gently curved objects, in terms of the ratio of distance to radius of curvature. A gradient expansion allows us to go beyond the lowest order proximity transfer approximation. The range of validity of such expansion depends on temperature as well as material properties. Generally, the expansion converges faster for the d…
▽ More
We develop a small distance expansion for the radiative heat transfer between gently curved objects, in terms of the ratio of distance to radius of curvature. A gradient expansion allows us to go beyond the lowest order proximity transfer approximation. The range of validity of such expansion depends on temperature as well as material properties. Generally, the expansion converges faster for the derivative of the transfer than for the transfer itself, which we use by introducing a near-field adjusted plot. For the case of a sphere and a plate, the logarithmic correction to the leading term has a very small prefactor for all materials investigated.
△ Less
Submitted 16 January, 2013; v1 submitted 12 October, 2012;
originally announced October 2012.
-
Casimir forces on a silicon micromechanical chip
Authors:
J. Zou,
Z. Marcet,
A. W. Rodriguez,
M. T. H. Reid,
A. P. McCauley,
I. I. Kravchenko,
T. Lu,
Y. Bao,
S. G. Johnson,
H. B. Chan
Abstract:
Quantum fluctuations give rise to van der Waals and Casimir forces that dominate the interaction between electrically neutral objects at sub-micron separations. Under the trend of miniaturization, such quantum electrodynamical effects are expected to play an important role in micro- and nano-mechanical devices. Nevertheless, utilization of Casimir forces on the chip level remains a major challenge…
▽ More
Quantum fluctuations give rise to van der Waals and Casimir forces that dominate the interaction between electrically neutral objects at sub-micron separations. Under the trend of miniaturization, such quantum electrodynamical effects are expected to play an important role in micro- and nano-mechanical devices. Nevertheless, utilization of Casimir forces on the chip level remains a major challenge because all experiments so far require an external object to be manually positioned close to the mechanical element. Here, by integrating a force-sensing micromechanical beam and an electrostatic actuator on a single chip, we demonstrate the Casimir effect between two micromachined silicon components on the same substrate. A high degree of parallelism between the two near-planar interacting surfaces can be achieved because they are defined in a single lithographic step. Apart from providing a compact platform for Casimir force measurements, this scheme also opens the possibility of tailoring the Casimir force using lithographically defined components of non-conventional shapes.
△ Less
Submitted 17 May, 2013; v1 submitted 25 July, 2012;
originally announced July 2012.
-
A diameter--bandwidth product limitation of isolated-object cloaking
Authors:
Hila Hashemi,
Cheng Wei Qiu,
Alexander P. McCauley,
J. D. Joannopoulos,
Steven G. Johnson
Abstract:
We show that cloaking of isolated objects is subject to a diameter-bandwidth product limitation: as the size of the object increases, the bandwidth of good (small cross-section) cloaking decreases inversely with the diameter, as a consequence of causality constraints even for perfect fabrication and materials with negligible absorption. This generalizes a previous result that perfect cloaking of i…
▽ More
We show that cloaking of isolated objects is subject to a diameter-bandwidth product limitation: as the size of the object increases, the bandwidth of good (small cross-section) cloaking decreases inversely with the diameter, as a consequence of causality constraints even for perfect fabrication and materials with negligible absorption. This generalizes a previous result that perfect cloaking of isolated objects over a nonzero bandwidth violates causality. Furthermore, we demonstrate broader causality-based scaling limitations on any bandwidth-averaged cloaking cross-section, using complex analysis and the optical theorem to transform the frequency-averaged problem into a single scattering problem with transformed materials.
△ Less
Submitted 9 March, 2012;
originally announced March 2012.
-
Formaldehyde Densitometry of Galactic Star-Forming Regions Using the H2CO 3(12)-3(13) and 4(13)-4(14) Transitions
Authors:
Patrick I. McCauley,
Jeffrey G. Mangum,
Alwyn Wootten
Abstract:
We present Green Bank Telescope (GBT) observations of the 3(12)-3(13) (29 GHz) and 4(13)-4(14) (48 GHz) transitions of the H2CO molecule toward a sample of 23 well-studied star-forming regions. Analysis of the relative intensities of these transitions can be used to reliably measure the densities of molecular cores. Adopting kinetic temperatures from the literature, we have employed a Large Veloci…
▽ More
We present Green Bank Telescope (GBT) observations of the 3(12)-3(13) (29 GHz) and 4(13)-4(14) (48 GHz) transitions of the H2CO molecule toward a sample of 23 well-studied star-forming regions. Analysis of the relative intensities of these transitions can be used to reliably measure the densities of molecular cores. Adopting kinetic temperatures from the literature, we have employed a Large Velocity Gradient (LVG) model to derive the average hydrogen number density [n(H2)] within a 16 arcsecond beam toward each source. Densities in the range of 10^{5.5}--10^{6.5} cm^{-3} and ortho-formaldehyde column densities per unit line width between 10^{13.5} and 10^{14.5} cm^{-2} (km s^{-1})^{-1} are found for most objects, in general agreement with existing measurements. A detailed analysis of the advantages and limitations to this densitometry technique is also presented. We find that H2CO 3(12)-3(13)/4(13)-4(14) densitometry proves to be best suited to objects with T_K >~ 100 K, above which the H2CO LVG models become relatively independent of kinetic temperature. This study represents the first detection of these H2CO K-doublet transitions in all but one object in our sample. The ease with which these transitions were detected, coupled with their unique sensitivity to spatial density, make them excellent monitors of density in molecular clouds for future experiments. We also report the detection of the 9_2--8_1 A^- (29 GHz) transition of CH3OH toward 6 sources.
△ Less
Submitted 18 August, 2011;
originally announced August 2011.
-
Modeling near-field radiative heat transfer from sharp objects using a general 3d numerical scattering technique
Authors:
Alexander P. McCauley,
M. T. Homer Reid,
Matthias Krüger,
Steven G. Johnson
Abstract:
We examine the non-equilibrium radiative heat transfer between a plate and finite cylinders and cones, making the first accurate theoretical predictions for the total heat transfer and the spatial heat flux profile for three-dimensional compact objects including corners or tips. We find qualitatively different scaling laws for conical shapes at small separations, and in contrast to a flat/slightly…
▽ More
We examine the non-equilibrium radiative heat transfer between a plate and finite cylinders and cones, making the first accurate theoretical predictions for the total heat transfer and the spatial heat flux profile for three-dimensional compact objects including corners or tips. We find qualitatively different scaling laws for conical shapes at small separations, and in contrast to a flat/slightly-curved object, a sharp cone exhibits a local \emph{minimum} in the spatially resolved heat flux directly below the tip. The method we develop, in which a scattering-theory formulation of thermal transfer is combined with a boundary-element method for computing scattering matrices, can be applied to three-dimensional objects of arbitrary shape.
△ Less
Submitted 17 July, 2011; v1 submitted 11 July, 2011;
originally announced July 2011.
-
Casimir repulsion beyond the dipole regime
Authors:
Alexander P. McCauley,
Alejandro W. Rodriguez,
M. T. Homer Reid,
Steven G. Johnson
Abstract:
We extend a previous result [Phys. Rev. Lett. 105, 090403 (2010)] on Casimir repulsion between a plate with a hole and a cylinder centered above it to geometries in which the central object can no longer be treated as a point dipole. We show through numerical calculations that as the distance between the plate and central object decreases, there is an intermediate regime in which the repulsive for…
▽ More
We extend a previous result [Phys. Rev. Lett. 105, 090403 (2010)] on Casimir repulsion between a plate with a hole and a cylinder centered above it to geometries in which the central object can no longer be treated as a point dipole. We show through numerical calculations that as the distance between the plate and central object decreases, there is an intermediate regime in which the repulsive force increases dramatically. Beyond this, the force rapidly switches over to attraction as the separation decreases further to zero, in line with the proximity force approximation. We demonstrate that this effect can be understood as a competition between an increased repulsion due to a larger polarizability of the central object interacting with increased fringing fields near the edge of the plate, and attractive forces due primarily to the nonzero thickness of the plate. In comparison with our previous work, we find that using the same plate geometry but replacing the single cylinder with a ring of cylinders, or more generally an extended uniaxial conductor, the repulsive force can be enhanced by a factor of approximately $10^3$. We conclude that this enhancement, although quite dramatic, is still too small to yield detectable repulsive Casimir forces.
△ Less
Submitted 2 May, 2011;
originally announced May 2011.
-
Designing evanescent optical interactions to control the expression of Casimir forces in optomechanical structures
Authors:
Alejandro W. Rodriguez,
David Woolf,
Pui-Chuen Hui,
Eiji Iwase,
Alexander P. McCauley,
Federico Capasso,
Marko Loncar,
Steven G. Johnson
Abstract:
We propose an optomechanical structure consisting of a photonic-crystal (holey) membrane suspended above a layered silicon-on-insulator substrate in which resonant bonding/antibonding optical forces created by externally incident light from above enable all-optical control and actuation of stiction effects induced by the Casimir force. In this way, one can control how the Casimir force is expresse…
▽ More
We propose an optomechanical structure consisting of a photonic-crystal (holey) membrane suspended above a layered silicon-on-insulator substrate in which resonant bonding/antibonding optical forces created by externally incident light from above enable all-optical control and actuation of stiction effects induced by the Casimir force. In this way, one can control how the Casimir force is expressed in the mechanical dynamics of the membrane, not by changing the Casimir force directly but by optically modifying the geometry and counteracting the mechanical spring constant to bring the system in or out of regimes where Casimir physics dominate. The same optical response (reflection spectrum) of the membrane to the incident light can be exploited to accurately measure the effects of the Casimir force on the equilibrium separation of the membrane.
△ Less
Submitted 18 April, 2011; v1 submitted 21 January, 2011;
originally announced January 2011.
-
Bonding, antibonding and tunable optical forces in asymmetric membranes
Authors:
Alejandro W. Rodriguez,
Alexander P. McCauley,
Pui-Chuen Hui,
David Woolf,
Eiji Iwase,
Federico Capasso,
Marko Loncar,
Steven G. Johnson
Abstract:
We demonstrate that tunable attractive (bonding) and repulsive (anti-bonding) forces can arise in highly asymmetric structures coupled to external radiation, a consequence of the bonding/anti-bonding level repulsion of guided-wave resonances that was first predicted in symmetric systems. Our focus is a geometry consisting of a photonic-crystal (holey) membrane suspended above an unpatterned layere…
▽ More
We demonstrate that tunable attractive (bonding) and repulsive (anti-bonding) forces can arise in highly asymmetric structures coupled to external radiation, a consequence of the bonding/anti-bonding level repulsion of guided-wave resonances that was first predicted in symmetric systems. Our focus is a geometry consisting of a photonic-crystal (holey) membrane suspended above an unpatterned layered substrate, supporting planar waveguide modes that can couple via the periodic modulation of the holey membrane. Asymmetric geometries have a clear advantage in ease of fabrication and experimental characterization compared to symmetric double-membrane structures. We show that the asymmetry can also lead to unusual behavior in the force magnitudes of a bonding/antibonding pair as the membrane separation changes, including nonmonotonic dependences on the separation. We propose a computational method that obtains the entire force spectrum via a single time-domain simulation, by Fourier-transforming the response to a short pulse and thereby obtaining the frequency-dependent stress tensor. We point out that by operating with two, instead of a single frequency, these evanescent forces can be exploited to tune the spring constant of the membrane without changing its equilibrium separation.
△ Less
Submitted 16 January, 2011; v1 submitted 5 December, 2010;
originally announced December 2010.
-
Casimir micro-sphere diclusters and three-body effects in fluids
Authors:
Jaime Varela,
Alejandro W. Rodriguez,
Alexander P. McCauley,
Steven G. Johnson
Abstract:
Our previous article [Phys. Rev. Lett. 104, 060401 (2010)] predicted that Casimir forces induced by the material-dispersion properties of certain dielectrics can give rise to stable configurations of objects. This phenomenon was illustrated via a dicluster configuration of non-touching objects consisting of two spheres immersed in a fluid and suspended against gravity above a plate. Here, we exami…
▽ More
Our previous article [Phys. Rev. Lett. 104, 060401 (2010)] predicted that Casimir forces induced by the material-dispersion properties of certain dielectrics can give rise to stable configurations of objects. This phenomenon was illustrated via a dicluster configuration of non-touching objects consisting of two spheres immersed in a fluid and suspended against gravity above a plate. Here, we examine these predictions from the perspective of a practical experiment and consider the influence of non-additive, three-body, and nonzero-temperature effects on the stability of the two spheres. We conclude that the presence of Brownian motion reduces the set of experimentally realizable silicon/teflon spherical diclusters to those consisting of layered micro-spheres, such as the hollow- core (spherical shells) considered here.
△ Less
Submitted 12 April, 2011; v1 submitted 3 December, 2010;
originally announced December 2010.
-
Calculation of nonzero-temperature Casimir forces in the time domain
Authors:
Kai Pan,
Alexander P. McCauley,
Alejandro W. Rodriguez,
M. T. Homer Reid,
Jacob K. White,
Steven G. Johnson
Abstract:
We show how to compute Casimir forces at nonzero temperatures with time-domain electromagnetic simulations, for example using a finite-difference time-domain (FDTD) method. Compared to our previous zero-temperature time-domain method, only a small modification is required, but we explain that some care is required to properly capture the zero-frequency contribution. We validate the method against…
▽ More
We show how to compute Casimir forces at nonzero temperatures with time-domain electromagnetic simulations, for example using a finite-difference time-domain (FDTD) method. Compared to our previous zero-temperature time-domain method, only a small modification is required, but we explain that some care is required to properly capture the zero-frequency contribution. We validate the method against analytical and numerical frequency-domain calculations, and show a surprising high-temperature disappearance of a non-monotonic behavior previously demonstrated in a piston-like geometry.
△ Less
Submitted 21 November, 2010;
originally announced November 2010.
-
Structural anisotropy and orientation-induced Casimir repulsion in fluids
Authors:
Alexander P. McCauley,
F. S. S. Rosa,
Alejandro W. Rodriguez,
John D. Joannopoulos,
D. A. R. Dalvit,
Steven G. Johnson
Abstract:
In this work we theoretically consider the Casimir force between two periodic arrays of nanowires (both in vacuum, and on a substrate separated by a fluid) at separations comparable to the period. Specifically, we compute the dependence of the exact Casimir force between the arrays under both lateral translations and rotations. Although typically the force between such structures is well-character…
▽ More
In this work we theoretically consider the Casimir force between two periodic arrays of nanowires (both in vacuum, and on a substrate separated by a fluid) at separations comparable to the period. Specifically, we compute the dependence of the exact Casimir force between the arrays under both lateral translations and rotations. Although typically the force between such structures is well-characterized by the Proximity Force Approximation (PFA), we find that in the present case the microstructure modulates the force in a way qualitatively inconsistent with PFA. We find instead that effective-medium theory, in which the slabs are treated as homogeneous, anisotropic dielectrics, gives a surprisingly accurate picture of the force, down to separations of half the period. This includes a situation for identical, fluid-separated slabs in which the exact force changes sign with the orientation of the wire arrays, whereas PFA predicts attraction. We discuss the possibility of detecting these effects in experiments, concluding that this effect is strong enough to make detection possible in the near future.
△ Less
Submitted 12 May, 2011; v1 submitted 22 September, 2010;
originally announced September 2010.
-
Microstructure Effects for Casimir Forces in Chiral Metamaterials
Authors:
Alexander P. McCauley,
Rongkuo Zhao,
M. T. Homer Reid,
Alejandro W. Rodriguez,
Jiangfeng Zhou,
F. S. S. Rosa,
John D. Joannopoulos,
D. A. R. Dalvit,
Costas M. Soukoulis,
Steven G. Johnson
Abstract:
We examine a recent prediction for the chirality-dependence of the Casimir force in chiral metamaterials by numerical computation of the forces between the exact microstructures, rather than homogeneous approximations. We compute the exact force for a chiral bent-cross pattern, as well as forces for an idealized "omega"-particle medium in the dilute approximation and identify the effects of struct…
▽ More
We examine a recent prediction for the chirality-dependence of the Casimir force in chiral metamaterials by numerical computation of the forces between the exact microstructures, rather than homogeneous approximations. We compute the exact force for a chiral bent-cross pattern, as well as forces for an idealized "omega"-particle medium in the dilute approximation and identify the effects of structural inhomogeneity (i.e. proximity forces and anisotropy). We find that these microstructure effects dominate the force for separations where chirality was predicted to have a strong influence. To get observations of chirality free from microstructure effects, one must go to large separations where the effect of chirality is at most $\sim10^{-4}$ of the total force.
△ Less
Submitted 28 June, 2010;
originally announced June 2010.
-
Achieving a Strongly Temperature-Dependent Casimir Effect
Authors:
Alejandro W. Rodriguez,
David Woolf,
Alexander P. McCauley,
Federico Capasso,
John D. Joannopoulos,
Steven G. Johnson
Abstract:
We propose a method of achieving large temperature sensitivity in the Casimir force that involves measuring the stable separation between dielectric objects immersed in fluid. We study the Casimir force between slabs and spheres using realistic material models, and find large > 2nm/K variations in their stable separations (hundreds of nanometers) near room temperature. In addition, we analyze the…
▽ More
We propose a method of achieving large temperature sensitivity in the Casimir force that involves measuring the stable separation between dielectric objects immersed in fluid. We study the Casimir force between slabs and spheres using realistic material models, and find large > 2nm/K variations in their stable separations (hundreds of nanometers) near room temperature. In addition, we analyze the effects of Brownian motion on suspended objects, and show that the average separation is also sensitive to changes in temperature . Finally, this approach also leads to rich qualitative phenomena, such as irreversible transitions, from suspension to stiction, as the temperature is varied.
△ Less
Submitted 15 April, 2010;
originally announced April 2010.
-
Casimir repulsion between metallic objects in vacuum
Authors:
Michael Levin,
Alexander P. McCauley,
Alejandro W. Rodriguez,
M. T. Homer Reid,
Steven G. Johnson
Abstract:
We give an example of a geometry in which two metallic objects in vacuum experience a repulsive Casimir force. The geometry consists of an elongated metal particle centered above a metal plate with a hole. We prove that this geometry has a repulsive regime using a symmetry argument and confirm it with numerical calculations for both perfect and realistic metals. The system does not support stable…
▽ More
We give an example of a geometry in which two metallic objects in vacuum experience a repulsive Casimir force. The geometry consists of an elongated metal particle centered above a metal plate with a hole. We prove that this geometry has a repulsive regime using a symmetry argument and confirm it with numerical calculations for both perfect and realistic metals. The system does not support stable levitation, as the particle is unstable to displacements away from the symmetry axis.
△ Less
Submitted 6 August, 2010; v1 submitted 17 March, 2010;
originally announced March 2010.
-
Non-touching nanoparticle diclusters bound by repulsive and attractive Casimir forces
Authors:
Alejandro W. Rodriguez,
Alexander P. McCauley,
David Woolf,
Federico Capasso,
John D. Joannopoulos,
Steven G. Johnson
Abstract:
We present a scheme for obtaining stable Casimir suspension of dielectric nontouching objects immersed in a fluid, validated here in various geometries consisting of ethanol-separated dielectric spheres and semi-infinite slabs. Stability is induced by the dispersion properties of real dielectric (monolithic) materials. A consequence of this effect is the possibility of stable configurations (clu…
▽ More
We present a scheme for obtaining stable Casimir suspension of dielectric nontouching objects immersed in a fluid, validated here in various geometries consisting of ethanol-separated dielectric spheres and semi-infinite slabs. Stability is induced by the dispersion properties of real dielectric (monolithic) materials. A consequence of this effect is the possibility of stable configurations (clusters) of compact objects, which we illustrate via a "molecular" two-sphere dicluster geometry consiting of two bound spheres levitated above a gold slab. Our calculations also reveal a strong interplay between material and geometric dispersion, and this is exemplified by the qualitatively different stability behavior observed in planar versus spherical geometries.
△ Less
Submitted 11 December, 2009;
originally announced December 2009.
-
Casimir forces in the time domain II: Applications
Authors:
Alexander P. McCauley,
Alejandro W. Rodriguez,
John D. Joannopoulos,
Steven G. Johnson
Abstract:
Our preceding paper introduced a method to compute Casimir forces in arbitrary geometries and for arbitrary materials that was based on a finite-difference time-domain (FDTD) scheme. In this manuscript, we focus on the efficient implementation of our method for geometries of practical interest and extend our previous proof-of-concept algorithm in one dimension to problems in two and three dimens…
▽ More
Our preceding paper introduced a method to compute Casimir forces in arbitrary geometries and for arbitrary materials that was based on a finite-difference time-domain (FDTD) scheme. In this manuscript, we focus on the efficient implementation of our method for geometries of practical interest and extend our previous proof-of-concept algorithm in one dimension to problems in two and three dimensions, introducing a number of new optimizations. We consider Casimir piston-like problems with nonmonotonic and monotonic force dependence on sidewall separation, both for previously solved geometries to validate our method and also for new geometries involving magnetic sidewalls and/or cylindrical pistons. We include realistic dielectric materials to calculate the force between suspended silicon waveguides or on a suspended membrane with periodic grooves, also demonstrating the application of PML absorbing boundaries and/or periodic boundaries. In addition we apply this method to a realizable three-dimensional system in which a silica sphere is stably suspended in a fluid above an indented metallic substrate. More generally, the method allows off-the-shelf FDTD software, already supporting a wide variety of materials (including dielectric, magnetic, and even anisotropic materials) and boundary conditions, to be exploited for the Casimir problem.
△ Less
Submitted 26 October, 2009; v1 submitted 29 June, 2009;
originally announced June 2009.
-
Casimir forces in the time domain: I. Theory
Authors:
Alejandro W. Rodriguez,
Alexander P. McCauley,
John D. Joannopoulos,
Steven G. Johnson
Abstract:
We introduce a method to compute Casimir forces in arbitrary geometries and for arbitrary materials based on the finite-difference time-domain (FDTD) scheme. The method involves the time-evolution of electric and magnetic fields in response to a set of current sources, in a modified medium with frequency-independent conductivity. The advantage of this approach is that it allows one to exploit ex…
▽ More
We introduce a method to compute Casimir forces in arbitrary geometries and for arbitrary materials based on the finite-difference time-domain (FDTD) scheme. The method involves the time-evolution of electric and magnetic fields in response to a set of current sources, in a modified medium with frequency-independent conductivity. The advantage of this approach is that it allows one to exploit existing FDTD software, without modification, to compute Casimir forces. In this manuscript, part I, we focus on the derivation, implementation choices, and essential properties of the time-domain algorithm, considered both analytically and illustrated in the simplest parallel-plate geometry. Part II presents results for more complex two- and three-dimensional geometries.
△ Less
Submitted 21 April, 2009; v1 submitted 1 April, 2009;
originally announced April 2009.
-
Ingredients of a Casimir analog computer
Authors:
Alejandro W. Rodriguez,
Alexander P. McCauley,
John D. Joannopoulos,
Steven G. Johnson
Abstract:
We present the basic ingredients of a technique to compute quantum Casimir forces at micrometer scales using antenna measurements at tabletop, e.g. centimeter, scales, forming a type of analog computer for the Casimir force. This technique relies on a correspondence that we derive between the contour integration of the Casimir force in the complex frequency plane and the electromagnetic response…
▽ More
We present the basic ingredients of a technique to compute quantum Casimir forces at micrometer scales using antenna measurements at tabletop, e.g. centimeter, scales, forming a type of analog computer for the Casimir force. This technique relies on a correspondence that we derive between the contour integration of the Casimir force in the complex frequency plane and the electromagnetic response of a physical dissipative medium in a finite, real frequency bandwidth.
△ Less
Submitted 9 March, 2009; v1 submitted 3 March, 2009;
originally announced March 2009.
-
Computation and visualization of photonic quasicrystal spectra via Blochs theorem
Authors:
Alejandro W. Rodriguez,
Alexander P. McCauley,
Yehuda Avniel,
Steven G. Johnson
Abstract:
Previous methods for determining photonic quasicrystal (PQC) spectra have relied on the use of large supercells to compute the eigenfrequencies and/or local density of states (LDOS). In this manuscript, we present a method by which the energy spectrum and the eigenstates of a PQC can be obtained by solving Maxwells equations in higher dimensions for any PQC defined by the standard cut-and-projec…
▽ More
Previous methods for determining photonic quasicrystal (PQC) spectra have relied on the use of large supercells to compute the eigenfrequencies and/or local density of states (LDOS). In this manuscript, we present a method by which the energy spectrum and the eigenstates of a PQC can be obtained by solving Maxwells equations in higher dimensions for any PQC defined by the standard cut-and-project construction, to which a generalization of Blochs theorem applies. In addition, we demonstrate how one can compute band structures with defect states in the higher-dimensional superspace with no additional computational cost. As a proof of concept, these general ideas are demonstrated for the simple case of one-dimensional quasicrystals, which can also be solved by simple transfer-matrix techniques.
△ Less
Submitted 7 March, 2008; v1 submitted 13 November, 2007;
originally announced November 2007.
-
New constraints on the mass composition of cosmic rays above 10^17 eV from Volcano Ranch measurements
Authors:
M. T. Dova,
M. E. Mancenido,
A. G. Mariazzi,
T. P. McCauley,
A. A. Watson
Abstract:
Linsley used the Volcano Ranch array to collect data on the lateral distribution of showers produced by cosmic rays at energies above 10^17 eV. Very precise measurements of the steepness of the lateral distribution function were made on 366 events. The current availability of sophisticated hadronic interaction models has prompted an interpretation of the measurements. In this analysis we use the…
▽ More
Linsley used the Volcano Ranch array to collect data on the lateral distribution of showers produced by cosmic rays at energies above 10^17 eV. Very precise measurements of the steepness of the lateral distribution function were made on 366 events. The current availability of sophisticated hadronic interaction models has prompted an interpretation of the measurements. In this analysis we use the AIRES Monte Carlo code to generate showers, together with GEANT4 to simulate the detector response to ground particles. The results show that, with the assumption of a bi-modal proton and iron mix, iron is the dominant component of cosmic rays between 5x10^17 and 10^19 eV, assuming that hadronic interactions are well-described by QGSJET at this energy range.
△ Less
Submitted 17 December, 2003;
originally announced December 2003.
-
An Estimate Of The Primary Mass Of Cosmic Rays At $10^{18}$ eV As Inferred From Volcano Ranch Data
Authors:
M. T. Dova,
M. E. Mancenido,
A. G. Mariazzi,
T. P. McCauley,
A. A. Watson
Abstract:
Accurate measurements of the lateral distribution of extensive air showers produced by cosmic rays of energy greater than $10^{17}$ eV were made in the 1970s by Linsley. At the time, the state of knowledge about the best hadronic interaction model to use to describe such data prevented conclusions about the cosmic ray mass from being drawn. We have used a modern model, {\sc qgsjet98}, to infer t…
▽ More
Accurate measurements of the lateral distribution of extensive air showers produced by cosmic rays of energy greater than $10^{17}$ eV were made in the 1970s by Linsley. At the time, the state of knowledge about the best hadronic interaction model to use to describe such data prevented conclusions about the cosmic ray mass from being drawn. We have used a modern model, {\sc qgsjet98}, to infer the primary mass from these data, using the very careful records left by Linsley. We find that at a median energy of $10^{18}$ eV, the data are well described by an iron-dominated composition (88 $\pm$ 6(stat) $\pm$ 18 (syst))%. We discuss the systematic errors in this estimate that arise from model uncertainties and from the range of energies used in the work of Linsley. These data are used with the permission of the late John Linsley to whom this work is dedicated.
△ Less
Submitted 19 May, 2003;
originally announced May 2003.
-
SCROD: School Cosmic Ray Outreach Detector
Authors:
Evgueni Gouchtchine,
Thomas P. McCauley,
Yuri Musienko,
Thomas C. Paul,
Stephen Reucroft,
John D. Swain
Abstract:
We report progress on applying technologies developed for LHC-era experiments to cosmic ray detection, using scintillating tiles with embedded wavelength-shifting fibers and avalanche photodiode readouts as parts of a robust, inexpensive cosmic air shower detector. We are planning to deploy such detectors in high schools as part of an outreach effort able to search for long-distance correlations…
▽ More
We report progress on applying technologies developed for LHC-era experiments to cosmic ray detection, using scintillating tiles with embedded wavelength-shifting fibers and avalanche photodiode readouts as parts of a robust, inexpensive cosmic air shower detector. We are planning to deploy such detectors in high schools as part of an outreach effort able to search for long-distance correlations between airshowers.
△ Less
Submitted 12 May, 2003;
originally announced May 2003.
-
Numerical Likelihood Analysis of Cosmic Ray Anisotropies
Authors:
Carlos Hojvat,
Thomas P. McCauley,
Stephen Reucroft,
John D. Swain
Abstract:
A numerical likelihood approach to the determination of cosmic ray anisotropies is presented which offers many advantages over other approaches. It allows a wide range of statistically meaningful hypotheses to be compared even when full sky coverage is unavailable, can be readily extended in order to include measurement errors, and makes maximum unbiased use of all available information.
A numerical likelihood approach to the determination of cosmic ray anisotropies is presented which offers many advantages over other approaches. It allows a wide range of statistically meaningful hypotheses to be compared even when full sky coverage is unavailable, can be readily extended in order to include measurement errors, and makes maximum unbiased use of all available information.
△ Less
Submitted 12 May, 2003;
originally announced May 2003.
-
Neutrinos from Accreting Neutron Stars
Authors:
Luis A. Anchordoqui,
Diego F. Torres,
Thomas P. McCauley,
Gustavo E. Romero,
Felix A. Aharonian
Abstract:
The magnetospheres of accreting neutron stars develop electrostatic gaps with huge potential drops. Protons and ions, accelerated in these gaps along the dipolar magnetic field lines to energies greater than 100 TeV, can impact onto a surrounding accretion disc. A proton-induced cascade so develops, and $ν$-emission is produced from charged pion decays. Using GEANT4, a computer code that tracks…
▽ More
The magnetospheres of accreting neutron stars develop electrostatic gaps with huge potential drops. Protons and ions, accelerated in these gaps along the dipolar magnetic field lines to energies greater than 100 TeV, can impact onto a surrounding accretion disc. A proton-induced cascade so develops, and $ν$-emission is produced from charged pion decays. Using GEANT4, a computer code that tracks particles produced in high energy collisions, we have calculated the resulting $ν$-spectrum with extensive disc shower simulations. We show that the $ν$-spectrum produced out of the proton beam is a power law. We use this result to propose accretion-powered X-ray binaries (with highly magnetized neutron stars) as a new population of point-like $ν$-sources for km-scale detectors, such as ICECUBE. As a particular example we discuss the case of A0535+26. We show that ICECUBE should find A0535+26 to be a periodic $ν$-source: one for which the formation and loss of its accretion disc can be fully detected. Finally, we briefly comment on the possibility that smaller telescopes, like AMANDA, could also detect A0535+26 by folding observations with the orbital period.
△ Less
Submitted 30 January, 2003; v1 submitted 14 November, 2002;
originally announced November 2002.
-
A reinterpretation of Volcano Ranch lateral distribution measurements to infer the mass composition of cosmic rays
Authors:
M. T. Dova,
M. E. Mancenido,
A. G. Mariazzi,
T. P. McCauley,
A. A. Watson
Abstract:
In the course of its operation, the Volcano Ranch array collected data on the lateral distribution of showers produced by cosmic rays at energies above $10^{17}$ {\rm eV}. From these data very precise measurements of the steepness of the lateral distribution function, characterized by the $η$ parameter, were made. The current availability of sophisticated hadronic interaction models has prompted…
▽ More
In the course of its operation, the Volcano Ranch array collected data on the lateral distribution of showers produced by cosmic rays at energies above $10^{17}$ {\rm eV}. From these data very precise measurements of the steepness of the lateral distribution function, characterized by the $η$ parameter, were made. The current availability of sophisticated hadronic interaction models has prompted a reinterpretation of the measurements. We use the interaction models {\sc qgsjet} and {\sc sibyll} in the {\sc aires} Monte Carlo code to generate showers together with {\sc geant4} to simulate the response of the detectors to ground particles. As part of an effort to estimate the primary mass composition of cosmic rays at this energy range, we present the results of our preliminary analysis of the distribution of $η$.
△ Less
Submitted 22 October, 2002; v1 submitted 21 October, 2002;
originally announced October 2002.
-
School Cosmic Ray Outreach Detector (SCROD)
Authors:
L. A. Anchordoqui,
J. Cook,
M. Gabour,
N. Kirsch,
J. MacLeod,
T. P. McCauley,
Y. Musienko,
T. C. Paul,
S. Reucroft,
J. D. Swain,
R. Terry
Abstract:
We report on our studies of applying novel detector technologies developed for LHC-era experiments to cosmic ray detection. In particular, we are investigating usage of scintillating tiles with embedded wavelength-shifting fibers and avalanche photodiode readout as part of a robust, inexpensive cosmic air shower detector. In the near future, we are planning to deploy detector stations based on t…
▽ More
We report on our studies of applying novel detector technologies developed for LHC-era experiments to cosmic ray detection. In particular, we are investigating usage of scintillating tiles with embedded wavelength-shifting fibers and avalanche photodiode readout as part of a robust, inexpensive cosmic air shower detector. In the near future, we are planning to deploy detector stations based on this technology at area high schools and colleges as part of an outreach and education effort, known as SCROD.
△ Less
Submitted 31 May, 2001;
originally announced June 2001.
-
Echoes of the fifth dimension?
Authors:
Luis A. Anchordoqui,
Thomas P. McCauley,
Stephen Reucroft,
John Swain
Abstract:
In this article we examine the question of whether the highest energy cosmic ray primaries could be ultra relativistic magnetic monopoles. The analysis is performed within the framework of large compact dimensions and TeV scale quantum gravity. Our study indicates that while this hypothesis must be regarded as highly speculative it cannot be ruled out with present data.
In this article we examine the question of whether the highest energy cosmic ray primaries could be ultra relativistic magnetic monopoles. The analysis is performed within the framework of large compact dimensions and TeV scale quantum gravity. Our study indicates that while this hypothesis must be regarded as highly speculative it cannot be ruled out with present data.
△ Less
Submitted 7 November, 2000; v1 submitted 27 September, 2000;
originally announced September 2000.
-
On the nature of cosmic rays above the Greisen--Zatsepin--Kuz'min cut off
Authors:
L. A. Anchordoqui,
M. Kirasirova,
T. P. McCauley,
S. Reucroft,
J. D. Swain
Abstract:
A re-examination of the atmospheric cascade profile of the highest energy cosmic ray is presented. The study includes air-shower simulations considering different cross sections, particle multiplicity and variation of the hadronic-event-generator to model interactions above 200 GeV. The analysis provides evidence that a medium mass nucleus primary reproduces the shower profile quite well. This r…
▽ More
A re-examination of the atmospheric cascade profile of the highest energy cosmic ray is presented. The study includes air-shower simulations considering different cross sections, particle multiplicity and variation of the hadronic-event-generator to model interactions above 200 GeV. The analysis provides evidence that a medium mass nucleus primary reproduces the shower profile quite well. This result does not support the idea, increasingly popular at present, that the highest energy particles are protons, derived from the decay of supermassive relic particles. On the other hand, we show that debris of relativistic super-heavy nuclei, which can survive a 100 Mpc journey through the primeval radiation are likely to generate such a kind of cascade.
△ Less
Submitted 14 September, 2000; v1 submitted 26 July, 2000;
originally announced July 2000.
-
Fractal Electromagnetic Showers
Authors:
L. A. Anchordoqui,
M. Kirasirova,
T. P. McCauley,
T. Paul,
S. Reucroft,
J. D. Swain
Abstract:
We study the self-similar structure of electromagnetic showers and introduce the notion of the fractal dimension of a shower. Studies underway of showers in various materials and at various energies are presented, and the range over which the fractal scaling behaviour is observed is discussed. Applications to fast shower simulations and identification, particularly in the context of extensive ai…
▽ More
We study the self-similar structure of electromagnetic showers and introduce the notion of the fractal dimension of a shower. Studies underway of showers in various materials and at various energies are presented, and the range over which the fractal scaling behaviour is observed is discussed. Applications to fast shower simulations and identification, particularly in the context of extensive air showers, are also discussed.
△ Less
Submitted 11 June, 2000;
originally announced June 2000.
-
Using {\sc top-c} for Commodity Parallel Computing in Cosmic Ray Physics Simulations
Authors:
G. Alverson,
L. A. Anchordoqui,
G. Cooperman,
V. Grinberg,
T. P. McCauley,
T. Paul,
S. Reucroft,
J. D. Swain
Abstract:
{\sc top-c} (Task Oriented Parallel C) is a freely available package for parallel computing. It is designed to be easy to learn and to have good tolerance for the high latencies that are common in commodity networks of computers. It has been successfully used in a wide range of examples, providing linear speedup with the number of computers. A brief overview of {\sc top-c} is provided, along wit…
▽ More
{\sc top-c} (Task Oriented Parallel C) is a freely available package for parallel computing. It is designed to be easy to learn and to have good tolerance for the high latencies that are common in commodity networks of computers. It has been successfully used in a wide range of examples, providing linear speedup with the number of computers. A brief overview of {\sc top-c} is provided, along with recent experience with cosmic ray physics simulations.
△ Less
Submitted 11 June, 2000;
originally announced June 2000.