-
Enhancing the light yield of He:CF$_4$ based gaseous detector
Authors:
F. D. Amaro,
R. Antonietti,
E. Baracchini,
L. Benussi,
S. Bianco,
R. Campagnola,
C. Capoccia,
M. Caponero,
D. S. Cardoso,
L. G. M. de Carvalho,
G. Cavoto,
I. Abritta Costa,
A. Croce,
E. Dané,
G. Dho,
F. Di Giambattista,
E. Di Marco,
M. D'Astolfo,
G. D'Imperio,
D. Fiorina,
F. Iacoangeli,
Z. Islam,
H. P. L. Jùnior,
E. Kemp,
G. Maccarrone
, et al. (29 additional authors not shown)
Abstract:
The CYGNO experiment aims to build a large ($\mathcal{O}(10)$ m$^3$) directional detector for rare event searches, such as nuclear recoils (NRs) induced by dark matter (DM), such as weakly interactive massive particles (WIMPs). The detector concept comprises a time projection chamber (TPC), filled with a He:CF$_4$ 60/40 scintillating gas mixture at room temperature and atmospheric pressure, equipp…
▽ More
The CYGNO experiment aims to build a large ($\mathcal{O}(10)$ m$^3$) directional detector for rare event searches, such as nuclear recoils (NRs) induced by dark matter (DM), such as weakly interactive massive particles (WIMPs). The detector concept comprises a time projection chamber (TPC), filled with a He:CF$_4$ 60/40 scintillating gas mixture at room temperature and atmospheric pressure, equipped with an amplification stage made of a stack of three gas electron multipliers (GEMs) which are coupled to an optical readout. The latter consists in scientific CMOS (sCMOS) cameras and photomultipliers tubes (PMTs). The maximisation of the light yield of the amplification stage plays a major role in the determination of the energy threshold of the experiment. In this paper, we simulate the effect of the addition of a strong electric field below the last GEM plane on the GEM field structure and we experimentally test it by means of a 10$\times$10 cm$^2$ readout area prototype. The experimental measurements analyse stacks of different GEMs and helium concentrations in the gas mixture combined with this extra electric field, studying their performances in terms of light yield, energy resolution and intrinsic diffusion. It is found that the use of this additional electric field permits large light yield increases without degrading intrinsic characteristics of the amplification stage with respect to the regular use of GEMs.
△ Less
Submitted 9 June, 2024;
originally announced June 2024.
-
Charge Amplification in Low Pressure CF4:SF6:He Mixtures with a Multi-Mesh ThGEM for Directional Dark Matter Searches
Authors:
F. D. Amaro,
E. Baracchini,
L. Benussi,
S. Bianco,
F. Borra,
C. Capoccia,
M. Caponero,
D. S. Cardoso,
G. Cavoto,
I. A. Costa,
T. Crane,
E. Dane,
M. DAstolfo,
G. Dho,
F. Di Giambattista,
G. DImperio,
E. Di Marco,
J. M. F. Dos Santos,
A. C. Ezeribe,
D. Fiorina,
F. Iacoangeli,
H. P. Lima Junior,
G. S. P. Lopes,
G. Maccarrone,
R. D. P. Mano
, et al. (24 additional authors not shown)
Abstract:
The CYGNO collaboration is develo** next generation directional Dark Matter (DM) detection experiments, using gaseous Time Projection Chambers (TPCs), as a robust method for identifying Weakly Interacting Massive Particles (WIMPs) below the Neutrino Fog. SF6 is potentially ideal for this since it provides a high fluorine content, enhancing sensitivity to spin-dependent interactions and, as a Neg…
▽ More
The CYGNO collaboration is develo** next generation directional Dark Matter (DM) detection experiments, using gaseous Time Projection Chambers (TPCs), as a robust method for identifying Weakly Interacting Massive Particles (WIMPs) below the Neutrino Fog. SF6 is potentially ideal for this since it provides a high fluorine content, enhancing sensitivity to spin-dependent interactions and, as a Negative Ion Drift (NID) gas, reduces charge diffusion leading to improved positional resolution. CF4, although not a NID gas, has also been identified as a favourable gas target as it provides a scintillation signal which can be used for a complimentary light/charge readout approach. These gases can operate at low pressures to elongate Nuclear Recoil (NR) tracks and facilitate directional measurements. In principle, He could be added to low pressure SF6/CF4 without significant detriment to the length of 16S, 12C, and 19F recoils. This would improve the target mass, sensitivity to lower WIMP masses, and offer the possibility of atmospheric operation; potentially reducing the cost of a containment vessel. In this article, we present gas gain and energy resolution measurements, taken with a Multi-Mesh Thick Gaseous Electron Multiplier (MMThGEM), in low pressure SF6 and CF4:SF6 mixtures following the addition of He. We find that the CF4:SF6:He mixtures tested were able to produce gas gains on the order of 10^4 up to a total pressure of 100 Torr. These results demonstrate an order of magnitude improvement in charge amplification in NID gas mixtures with a He component.
△ Less
Submitted 28 May, 2024;
originally announced May 2024.
-
The future search for low-frequency axions and new physics with the FLASH resonant cavity experiment at Frascati National Laboratories
Authors:
David Alesini,
Danilo Babusci,
Paolo Beltrame,
Fabio Bossi,
Paolo Ciambrone,
Alessandro D'Elia,
Daniele Di Gioacchino,
Giampiero Di Pirro,
Babette Döbrich,
Paolo Falferi,
Claudio Gatti,
Maurizio Giannotti,
Paola Gianotti,
Gianluca Lamanna,
Carlo Ligi,
Giovanni Maccarrone,
Giovanni Mazzitelli,
Alessandro Mirizzi,
Michael Mueck,
Enrico Nardi,
Federico Nguyen,
Alessio Rettaroli,
Javad Rezvani,
Francesco Enrico Teofilo,
Simone Tocci
, et al. (3 additional authors not shown)
Abstract:
We present a proposal for a new experiment, the FINUDA magnet for Light Axion SearcH (FLASH), a large resonant-cavity haloscope in a high static magnetic field which is planned to probe new physics in the form of dark matter (DM) axions, scalar fields, chameleons, hidden photons, as well as high frequency gravitational waves (GWs). Concerning the QCD axion, FLASH will search for these particles as…
▽ More
We present a proposal for a new experiment, the FINUDA magnet for Light Axion SearcH (FLASH), a large resonant-cavity haloscope in a high static magnetic field which is planned to probe new physics in the form of dark matter (DM) axions, scalar fields, chameleons, hidden photons, as well as high frequency gravitational waves (GWs). Concerning the QCD axion, FLASH will search for these particles as the DM in the mass range (0.49-1.49) ueV, thus filling the mass gap between the ranges covered by other planned searches. A dedicated Microstrip SQUID operating at ultra-cryogenic temperatures will amplify the signal. The frequency range accessible overlaps with the Very High Frequency (VHF) range of the radio wave spectrum and allows for a search in GWs in the frequency range (100-300) MHz. The experiment will make use of the cryogenic plant and magnet of the FINUDA experiment at INFN Frascati National Laboratories near Rome (Italy); the operations needed to restore the functionalities of the apparatus are currently underway. We present the setup of the experiment and the sensitivity forecasts for the detection of axions, scalar fields, chameleons, hidden photons, and GWs.
△ Less
Submitted 1 September, 2023;
originally announced September 2023.
-
LIME -- a gas TPC prototype for directional Dark Matter search for the CYGNO experiment
Authors:
Fernando Domingues Amaro,
Elisabetta Baracchini,
Luigi Benussi,
Stefano Bianco,
Cesidio Capoccia,
Michele Caponero,
Danilo Santos Cardoso,
Gianluca Cavoto,
André Cortez,
Igor Abritta Costa,
Emiliano Dané,
Giorgio Dho,
Flaminia Di Giambattista,
Emanuele Di Marco,
Giulia D'Imperio,
Francesco Iacoangeli,
Herman Pessoa Lima Junior,
Guilherme Sebastiao Pinheiro Lopes,
Giovanni Maccarrone,
Rui Daniel Passos Mano,
Robert Renz Marcelo Gregorio,
David José Gaspar Marques,
Giovanni Mazzitelli,
Alasdair Gregor McLean,
Andrea Messina
, et al. (22 additional authors not shown)
Abstract:
The CYGNO experiment aims at the development of a large gaseous TPC with GEM-based amplification and an optical readout by means of PMTs and scientific CMOS cameras for 3D tracking down to O(keV) energies, for the directional detection of rare events such as low mass Dark Matter and solar neutrino interactions. The largest prototype built so far towards the realisation of the CYGNO experiment demo…
▽ More
The CYGNO experiment aims at the development of a large gaseous TPC with GEM-based amplification and an optical readout by means of PMTs and scientific CMOS cameras for 3D tracking down to O(keV) energies, for the directional detection of rare events such as low mass Dark Matter and solar neutrino interactions. The largest prototype built so far towards the realisation of the CYGNO experiment demonstrator is the 50 L active volume LIME, with 4 PMTs and a single sCMOS imaging a 33$\times$33 cm\textsuperscript{2} area for 50 cm drift, that has been installed in underground Laboratori Nazionali del Gran Sasso in February 2022. We will illustrate LIME performances as evaluated overground in Laboratori Nazionali di Frascati by means of radioactive X-ray sources, and in particular the detector stability, energy response and energy resolution. We will discuss the MC simulation developed to reproduce the detector response and show the comparison with actual data. We will furthermore examine the background simulation worked out for LIME underground data taking and illustrate the foreseen expected measurement and results in terms of natural and materials intrinsic radioactivity characterisation and measurement of the LNGS underground natural neutron flux. The results that will be obtained by underground LIME installation will be paramount in the optimisation of the CYGNO demonstrator, since this is foreseen to be composed by multiple modules with the same LIME dimensions and characteristics.
△ Less
Submitted 29 June, 2023;
originally announced June 2023.
-
The CYGNO experiment, a directional detector for direct Dark Matter searches
Authors:
F. D. Amaro,
E. Baracchini,
L. Benussi,
S. Bianco,
C. Capoccia,
M. Caponero,
D. S. Cardoso,
G. Cavoto,
A. Cortez,
I. A. Costa,
E. Dané,
G. Dho,
F. Di Giambattista,
E. Di Marco,
G. D'Imperio,
F. Iacoangeli,
H. P. L. Jùnior,
G. S. P. Lopes,
G. Maccarrone,
R. D. P. Mano,
R. R. M. Gregorio,
D. J. G. Marques,
G. Mazzitelli,
A. G. McLean,
A. Messina
, et al. (22 additional authors not shown)
Abstract:
The CYGNO project aims at the development of a high precision optical readout gaseous Tima Projection Chamber (TPC) for directional dark matter (DM) searches, to be hosted at Laboratori Nazionali del Gran Sasso (LNGS). CYGNO employs a He:CF$_4$ gas mixture at atmospheric pressure with a Gas Electron Multiplier (GEM) based amplification structure coupled to an optical readout comprised of sCMOS cam…
▽ More
The CYGNO project aims at the development of a high precision optical readout gaseous Tima Projection Chamber (TPC) for directional dark matter (DM) searches, to be hosted at Laboratori Nazionali del Gran Sasso (LNGS). CYGNO employs a He:CF$_4$ gas mixture at atmospheric pressure with a Gas Electron Multiplier (GEM) based amplification structure coupled to an optical readout comprised of sCMOS cameras and photomultiplier tubes (PMTs). This experimental setup allows to achieve 3D tracking and background rejection down to O(1) keV energy, to boost sensitivity to low WIMP masses. The characteristics of the optical readout approach in terms of the light yield will be illustrated along with the particle identification properties. The project timeline foresees, in the next 2-3 years, the realisation and installation of a 0.4 m$^3$ TPC in the underground laboratories at LNGS to act as a demonstrator. Finally, the studies of the expected DM sensitivities of the CYGNO demonstrator will be presented.
△ Less
Submitted 7 June, 2023;
originally announced June 2023.
-
A first test of CUPID prototypal light detectors with NTD-Ge sensors in a pulse-tube cryostat
Authors:
CUPID collaboration,
K. Alfonso,
A. Armatol,
C. Augier,
F. T. Avignone III,
O. Azzolini,
M. Balata,
A. S. Barabash,
G. Bari,
A. Barresi,
D. Baudin,
F. Bellini,
G. Benato,
V. Berest,
M. Beretta,
M. Bettelli,
M. Biassoni,
J. Billard,
V. Boldrini,
A. Branca,
C. Brofferio,
C. Bucci,
J. Camilleri,
A. Campani,
C. Capelli
, et al. (154 additional authors not shown)
Abstract:
CUPID is a next-generation bolometric experiment aiming at searching for neutrinoless double-beta decay with ~250 kg of isotopic mass of $^{100}$Mo. It will operate at $\sim$10 mK in a cryostat currently hosting a similar-scale bolometric array for the CUORE experiment at the Gran Sasso National Laboratory (Italy). CUPID will be based on large-volume scintillating bolometers consisting of…
▽ More
CUPID is a next-generation bolometric experiment aiming at searching for neutrinoless double-beta decay with ~250 kg of isotopic mass of $^{100}$Mo. It will operate at $\sim$10 mK in a cryostat currently hosting a similar-scale bolometric array for the CUORE experiment at the Gran Sasso National Laboratory (Italy). CUPID will be based on large-volume scintillating bolometers consisting of $^{100}$Mo-enriched Li$_2$MoO$_4$ crystals, facing thin Ge-wafer-based bolometric light detectors. In the CUPID design, the detector structure is novel and needs to be validated. In particular, the CUORE cryostat presents a high level of mechanical vibrations due to the use of pulse tubes and the effect of vibrations on the detector performance must be investigated. In this paper we report the first test of the CUPID-design bolometric light detectors with NTD-Ge sensors in a dilution refrigerator equipped with a pulse tube in an above-ground lab. Light detectors are characterized in terms of sensitivity, energy resolution, pulse time constants, and noise power spectrum. Despite the challenging noisy environment due to pulse-tube-induced vibrations, we demonstrate that all the four tested light detectors comply with the CUPID goal in terms of intrinsic energy resolution of 100 eV RMS baseline noise. Indeed, we have measured 70--90 eV RMS for the four devices, which show an excellent reproducibility. We have also obtained outstanding energy resolutions at the 356 keV line from a $^{133}$Ba source with one light detector achieving 0.71(5) keV FWHM, which is -- to our knowledge -- the best ever obtained when compared to $γ$ detectors of any technology in this energy range.
△ Less
Submitted 10 April, 2023;
originally announced April 2023.
-
Twelve-crystal prototype of Li$_2$MoO$_4$ scintillating bolometers for CUPID and CROSS experiments
Authors:
CUPID,
CROSS collaborations,
:,
K. Alfonso,
A. Armatol,
C. Augier,
F. T. Avignone III,
O. Azzolini,
M. Balata,
I. C. Bandac,
A. S. Barabash,
G. Bari,
A. Barresi,
D. Baudin,
F. Bellini,
G. Benato,
V. Berest,
M. Beretta,
M. Bettelli,
M. Biassoni,
J. Billard,
V. Boldrini,
A. Branca,
C. Brofferio,
C. Bucci
, et al. (160 additional authors not shown)
Abstract:
An array of twelve 0.28 kg lithium molybdate (LMO) low-temperature bolometers equipped with 16 bolometric Ge light detectors, aiming at optimization of detector structure for CROSS and CUPID double-beta decay experiments, was constructed and tested in a low-background pulse-tube-based cryostat at the Canfranc underground laboratory in Spain. Performance of the scintillating bolometers was studied…
▽ More
An array of twelve 0.28 kg lithium molybdate (LMO) low-temperature bolometers equipped with 16 bolometric Ge light detectors, aiming at optimization of detector structure for CROSS and CUPID double-beta decay experiments, was constructed and tested in a low-background pulse-tube-based cryostat at the Canfranc underground laboratory in Spain. Performance of the scintillating bolometers was studied depending on the size of phonon NTD-Ge sensors glued to both LMO and Ge absorbers, shape of the Ge light detectors (circular vs. square, from two suppliers), in different light collection conditions (with and without reflector, with aluminum coated LMO crystal surface). The scintillating bolometer array was operated over 8 months in the low-background conditions that allowed to probe a very low, $μ$Bq/kg, level of the LMO crystals radioactive contamination by $^{228}$Th and $^{226}$Ra.
△ Less
Submitted 10 April, 2023;
originally announced April 2023.
-
Toward CUPID-1T
Authors:
A. Armatol,
C. Augier,
F. T. Avignone III,
O. Azzolini,
M. Balata,
K. Ballen,
A. S. Barabash,
G. Bari,
A. Barresi,
D. Baudin,
F. Bellini,
G. Benato,
M. Beretta,
M. Bettelli,
M. Biassoni,
J. Billard,
V. Boldrini,
A. Branca,
C. Brofferio,
C. Bucci,
J. Camilleri,
C. Capelli,
S. Capelli,
L. Cappelli,
L. Cardani
, et al. (150 additional authors not shown)
Abstract:
Current experiments to search for broken lepton-number symmetry through the observation of neutrinoless double-beta decay ($0\mathrm{νββ}$) provide the most stringent limits on the Majorana nature of neutrinos and the effective Majorana neutrino mass ($m_{ββ}$). The next-generation experiments will focus on the sensitivity to the $0\mathrm{νββ}$ half-life of $\mathcal{O}(10^{27}$--$10^{28}$~years…
▽ More
Current experiments to search for broken lepton-number symmetry through the observation of neutrinoless double-beta decay ($0\mathrm{νββ}$) provide the most stringent limits on the Majorana nature of neutrinos and the effective Majorana neutrino mass ($m_{ββ}$). The next-generation experiments will focus on the sensitivity to the $0\mathrm{νββ}$ half-life of $\mathcal{O}(10^{27}$--$10^{28}$~years$)$ and $m_{ββ}\lesssim15$~meV, which would provide complete coverage of the so-called Inverted Ordering region of the neutrino mass parameter space. By taking advantage of recent technological breakthroughs, new, future calorimetric experiments at the 1-ton scale can increase the sensitivity by at least another order of magnitude, exploring the large fraction of the parameter space that corresponds to the Normal neutrino mass ordering. In case of a discovery, such experiments could provide important insights toward a new understanding of the mechanism of $0\mathrm{νββ}$.
We present here a series of projects underway that will provide advancements in background reduction, cryogenic readout, and physics searches beyond $0\mathrm{νββ}$, all moving toward the next-to-next generation CUPID-1T detector.
△ Less
Submitted 8 April, 2022; v1 submitted 16 March, 2022;
originally announced March 2022.
-
Recoil imaging for directional detection of dark matter, neutrinos, and physics beyond the Standard Model
Authors:
C. A. J. O'Hare,
D. Loomba,
K. Altenmüller,
H. Álvarez-Pol,
F. D. Amaro,
H. M. Araújo,
D. Aristizabal Sierra,
J. Asaadi,
D. Attié,
S. Aune,
C. Awe,
Y. Ayyad,
E. Baracchini,
P. Barbeau,
J. B. R. Battat,
N. F. Bell,
B. Biasuzzi,
L. J. Bignell,
C. Boehm,
I. Bolognino,
F. M. Brunbauer,
M. Caamaño,
C. Cabo,
D. Caratelli,
J. M. Carmona
, et al. (142 additional authors not shown)
Abstract:
Recoil imaging entails the detection of spatially resolved ionization tracks generated by particle interactions. This is a highly sought-after capability in many classes of detector, with broad applications across particle and astroparticle physics. However, at low energies, where ionization signatures are small in size, recoil imaging only seems to be a practical goal for micro-pattern gas detect…
▽ More
Recoil imaging entails the detection of spatially resolved ionization tracks generated by particle interactions. This is a highly sought-after capability in many classes of detector, with broad applications across particle and astroparticle physics. However, at low energies, where ionization signatures are small in size, recoil imaging only seems to be a practical goal for micro-pattern gas detectors. This white paper outlines the physics case for recoil imaging, and puts forward a decadal plan to advance towards the directional detection of low-energy recoils with sensitivity and resolution close to fundamental performance limits. The science case covered includes: the discovery of dark matter into the neutrino fog, directional detection of sub-MeV solar neutrinos, the precision study of coherent-elastic neutrino-nucleus scattering, the detection of solar axions, the measurement of the Migdal effect, X-ray polarimetry, and several other applied physics goals. We also outline the R&D programs necessary to test concepts that are crucial to advance detector performance towards their fundamental limit: single primary electron sensitivity with full 3D spatial resolution at the $\sim$100 micron-scale. These advancements include: the use of negative ion drift, electron counting with high-definition electronic readout, time projection chambers with optical readout, and the possibility for nuclear recoil tracking in high-density gases such as argon. We also discuss the readout and electronics systems needed to scale-up such detectors to the ton-scale and beyond.
△ Less
Submitted 17 July, 2022; v1 submitted 11 March, 2022;
originally announced March 2022.
-
Optimization of the first CUPID detector module
Authors:
CUPID collaboration,
A. Armatol,
C. Augier,
F. T. Avignone III,
O. Azzolini,
M. Balata,
K. Ballen,
A. S. Barabash,
G. Bari,
A. Barresi,
D. Baudin,
F. Bellini,
G. Benato,
M. Beretta,
M. Bettelli,
M. Biassoni,
J. Billard,
V. Boldrini,
A. Branca,
C. Brofferio,
C. Bucci,
J. Camilleri,
C. Capelli,
S. Capelli,
L. Cappelli
, et al. (153 additional authors not shown)
Abstract:
CUPID will be a next generation experiment searching for the neutrinoless double $β$ decay, whose discovery would establish the Majorana nature of the neutrino. Based on the experience achieved with the CUORE experiment, presently taking data at LNGS, CUPID aims to reach a background free environment by means of scintillating Li$_{2}$$^{100}$MoO$_4$ crystals coupled to light detectors. Indeed, the…
▽ More
CUPID will be a next generation experiment searching for the neutrinoless double $β$ decay, whose discovery would establish the Majorana nature of the neutrino. Based on the experience achieved with the CUORE experiment, presently taking data at LNGS, CUPID aims to reach a background free environment by means of scintillating Li$_{2}$$^{100}$MoO$_4$ crystals coupled to light detectors. Indeed, the simultaneous heat and light detection allows us to reject the dominant background of $α$ particles, as proven by the CUPID-0 and CUPID-Mo demonstrators. In this work we present the results of the first test of the CUPID baseline module. In particular, we propose a new optimized detector structure and light sensors design to enhance the engineering and the light collection, respectively. We characterized the heat detectors, achieving an energy resolution of (5.9 $\pm$ 0.2) keV FWHM at the $Q$-value of $^{100}$Mo (about 3034 keV). We studied the light collection of the baseline CUPID design with respect to an alternative configuration which features gravity-assisted light detectors' mounting. In both cases we obtained an improvement in the light collection with respect to past measures and we validated the particle identification capability of the detector, which ensures an $α$ particle rejection higher than 99.9%, fully satisfying the requirements for CUPID.
△ Less
Submitted 13 February, 2022;
originally announced February 2022.
-
The CYGNO Experiment
Authors:
Fernando Domingues Amaro,
Elisabetta Baracchini,
Luigi Benussi,
Stefano Bianco,
Cesidio Capoccia,
Michele Caponero,
Danilo Santos Cardoso,
Gianluca Cavoto,
André Cortez,
Igor Abritta Costa,
Rita Joanna da Cruz Roque,
Emiliano Dané,
Giorgio Dho,
Flaminia Di Giambattista,
Emanuele Di Marco,
Giovanni Grilli di Cortona,
Giulia D'Imperio,
Francesco Iacoangeli,
Herman Pessoa Lima Júnior,
Guilherme Sebastiao Pinheiro Lopes,
Amaro da Silva Lopes Júnior,
Giovanni Maccarrone,
Rui Daniel Passos Mano,
Michela Marafini,
Robert Renz Marcelo Gregorio
, et al. (25 additional authors not shown)
Abstract:
The search for a novel technology able to detect and reconstruct nuclear and electron recoil events with the energy of a few keV has become more and more important now that large regions of high-mass dark matter (DM) candidates have been excluded. Moreover, a detector sensitive to incoming particle direction will be crucial in the case of DM discovery to open the possibility of studying its proper…
▽ More
The search for a novel technology able to detect and reconstruct nuclear and electron recoil events with the energy of a few keV has become more and more important now that large regions of high-mass dark matter (DM) candidates have been excluded. Moreover, a detector sensitive to incoming particle direction will be crucial in the case of DM discovery to open the possibility of studying its properties. Gaseous time projection chambers (TPC) with optical readout are very promising detectors combining the detailed event information provided by the TPC technique with the high sensitivity and granularity of latest-generation scientific light sensors. The CYGNO experiment (a CYGNus module with Optical readout) aims to exploit the optical readout approach of multiple-GEM structures in large volume TPCs for the study of rare events as interactions of low-mass DM or solar neutrinos. The combined use of high-granularity sCMOS cameras and fast light sensors allows the reconstruction of the 3D direction of the tracks, offering good energy resolution and very high sensitivity in the few keV energy range, together with a very good particle identification useful for distinguishing nuclear recoils from electronic recoils. This experiment is part of the CYGNUS proto-collaboration, which aims at constructing a network of underground observatories for directional DM search. A one cubic meter demonstrator is expected to be built in 2022/23 aiming at a larger scale apparatus (30 m$^3$--100 m$^3$) at a later stage.
△ Less
Submitted 11 February, 2022;
originally announced February 2022.
-
CYGNO: a gaseous TPC with optical readout for dark matter directional search
Authors:
E. Baracchini,
L. Benussi,
S. Bianco,
C. Capoccia,
M. Caponero,
G. Cavoto,
A. Cortez,
I. A. Costa,
E. Di Marco,
G. D'Imperio,
G. Dho,
F. Iacoangeli,
G. Maccarrone,
M. Marafini,
G. Mazzitelli,
A. Messina,
R. A. Nobrega,
A. Orlandi,
E. Paoletti,
L. Passamonti,
F. Petrucci,
D. Piccolo,
D. Pierluigi,
D. Pinci,
F. Renga
, et al. (4 additional authors not shown)
Abstract:
The CYGNO project has the goal to use a gaseous TPC with optical readout to detect dark matter and solar neutrinos with low energy threshold and directionality. The CYGNO demonstrator will consist of 1 m 3 volume filled with He:CF 4 gas mixture at atmospheric pressure. Optical readout with high granularity CMOS sensors, combined with fast light detectors, will provide a detailed reconstruction of…
▽ More
The CYGNO project has the goal to use a gaseous TPC with optical readout to detect dark matter and solar neutrinos with low energy threshold and directionality. The CYGNO demonstrator will consist of 1 m 3 volume filled with He:CF 4 gas mixture at atmospheric pressure. Optical readout with high granularity CMOS sensors, combined with fast light detectors, will provide a detailed reconstruction of the event topology. This will allow to discriminate the nuclear recoil signal from the background, mainly represented by low energy electron recoils induced by radioactivity. Thanks to the high reconstruction efficiency, CYGNO will be sensitive to low mass dark matter, and will have the potential to overcome the neutrino floor, that ultimately limits non-directional dark matter searches.
△ Less
Submitted 24 July, 2020;
originally announced July 2020.
-
Identification of low energy nuclear recoils in a gas TPC with optical readout
Authors:
Elisabetta Baracchini,
Luigi Benussi,
Stefano Bianco,
Cesidio Capoccia,
Michele Arturo Caponero,
Gianluca Cavoto,
Andre Cortez,
Igor Abritta Costa,
Emanuele Di Marco,
Giulia D'Imperio,
Giorgio Dho,
Fabrizio Iacoangeli,
Giovanni Maccarrone,
Michela Marafini,
Giovanni Mazzitelli,
Andrea Messina,
Rafael Antunes Nobrega,
Aldo Orlandi,
Emiliano Paoletti,
Luciano Passamonti,
Fabrizio Petrucci,
Davide Piccolo,
Daniele Pierluigi,
Davide Pinci,
Francesco Renga
, et al. (5 additional authors not shown)
Abstract:
The search for a novel technology able to detect and reconstruct nuclear recoil events in the keV energy range has become more and more important as long as vast regions of high mass WIMP-like Dark Matter candidate have been excluded. Gaseous Time Projection Chambers (TPC) with optical readout are very promising candidate combining the complete event information provided by the TPC technique to th…
▽ More
The search for a novel technology able to detect and reconstruct nuclear recoil events in the keV energy range has become more and more important as long as vast regions of high mass WIMP-like Dark Matter candidate have been excluded. Gaseous Time Projection Chambers (TPC) with optical readout are very promising candidate combining the complete event information provided by the TPC technique to the high sensitivity and granularity of last generation scientific light sensors. A TPC with an amplification at the anode obtained with Gas Electron Multipliers (GEM) was tested at the Laboratori Nazionali di Frascati. Photons and neutrons from radioactive sources were employed to induce recoiling nuclei and electrons with kinetic energy in the range [1-100] keV. A He-CF4 (60/40) gas mixture was used at atmospheric pressure and the light produced during the multiplication in the GEM channels was acquired by a high position resolution and low noise scientific CMOS camera and a photomultiplier. A multi-stage pattern recognition algorithm based on an advanced clustering technique is presented here. A number of cluster shape observables are used to identify nuclear recoils induced by neutrons originated from a AmBe source against X-ray 55Fe photo-electrons. An efficiency of 18% to detect nuclear recoils with an energy of about 6 keV is reached obtaining at the same time a 96% 55Fe photo-electrons suppression. This makes this optically readout gas TPC a very promising candidate for future investigations of ultra-rare events as directional direct Dark Matter searches.
△ Less
Submitted 27 October, 2021; v1 submitted 24 July, 2020;
originally announced July 2020.
-
A density-based clustering algorithm for the CYGNO data analysis
Authors:
E. Baracchini,
L. Benussi,
S. Bianco,
C. Capoccia,
M. Caponero,
G. Cavoto,
A. Cortez,
I. A. Costa,
E. Di Marco,
G. D'Imperio,
G. Dho,
F. Iacoangeli,
G. Maccarrone,
M. Marafini,
G. Mazzitelli,
A. Messina,
R. A. Nobrega,
A. Orlandi,
E. Paoletti,
L. Passamonti,
F. Petrucci,
D. Piccolo,
D. Pierluigi,
D. Pinci,
F. Renga
, et al. (4 additional authors not shown)
Abstract:
Time Projection Chambers (TPCs) working in combination with Gas Electron Multipliers (GEMs) produce a very sensitive detector capable of observing low energy events. This is achieved by capturing photons generated during the GEM electron multiplication process by means of a high-resolution camera. The CYGNO experiment has recently developed a TPC Triple GEM detector coupled to a low noise and high…
▽ More
Time Projection Chambers (TPCs) working in combination with Gas Electron Multipliers (GEMs) produce a very sensitive detector capable of observing low energy events. This is achieved by capturing photons generated during the GEM electron multiplication process by means of a high-resolution camera. The CYGNO experiment has recently developed a TPC Triple GEM detector coupled to a low noise and high spatial resolution CMOS sensor. For the image analysis, an algorithm based on an adapted version of the well-known DBSCAN was implemented, called iDBSCAN. In this paper a description of the iDBSCAN algorithm is given, including test and validation of its parameters, and a comparison with DBSCAN itself and a widely used algorithm known as Nearest Neighbor Clustering (NNC). The results show that the adapted version of DBSCAN is capable of providing full signal detection efficiency and very good energy resolution while improving the detector background rejection.
△ Less
Submitted 28 September, 2020; v1 submitted 3 July, 2020;
originally announced July 2020.
-
Stability and detection performance of a GEM-based Optical Readout TPC with He/CF$_4$ gas mixtures
Authors:
E. Baracchini,
L. Benussi,
S. Bianco,
C. Capoccia,
M. Caponero,
G. Cavoto,
A. Cortez,
I. A. Costa,
E. Di Marco,
G. D'Imperio,
G. Dho,
F. Iacoangeli,
G. Maccarrone,
M. Marafini,
G. Mazzitelli,
A. Messina,
R. A. Nobrega,
A. Orlandi,
E. Paoletti,
L. Passamonti,
F. Petrucci,
D. Piccolo,
D. Pierluigi,
D. Pinci,
F. Renga
, et al. (4 additional authors not shown)
Abstract:
The performance and long term stability of an optically readout Time Projection Chamber with an electron amplification structure based on three Gas Electron Multipliers was studied. He/CF$_4$ based gas mixtures were used in two different proportions (60/40 and 70/30) in a CYGNO prototype with 7 litres sensitive volume. With electrical configurations providing very similar electron gains, an almost…
▽ More
The performance and long term stability of an optically readout Time Projection Chamber with an electron amplification structure based on three Gas Electron Multipliers was studied. He/CF$_4$ based gas mixtures were used in two different proportions (60/40 and 70/30) in a CYGNO prototype with 7 litres sensitive volume. With electrical configurations providing very similar electron gains, an almost full detection efficiency in the whole detector volume was found with both mixtures, while a light yield about 20\% larger for the 60/40 was found. The electrostatic stability was tested by monitoring voltages and currents during 25 days. The detector worked in very stable and safe condition for the whole period. In the presence of less CF$_4$, a larger probability of unstable events was clearly detected.
△ Less
Submitted 17 August, 2020; v1 submitted 1 July, 2020;
originally announced July 2020.
-
Performance of an optically read out time projection chamber with ultra-relativistic electrons
Authors:
V. C. Antochi,
E. Baracchini,
L. Benussi,
S. Bianco,
C. Capoccia,
M. Caponero,
G. Cavoto,
A. Cortez,
I. A. Costa,
E. Di Marco,
G. D'Imperio,
G. Dho,
F. Iacoangeli,
G Maccarrone,
M. Marafini,
G. Mazzitelli,
A. Messina,
R. A. N'obrega,
A. Orlandi,
E. Paoletti,
L. Passamonti,
F. Petrucci,
D. Piccolo,
D. Pierluigi,
D. Pinci
, et al. (6 additional authors not shown)
Abstract:
The Time Projection Chamber (TPC) is an ideal candidate to finely study the charged particle ionization in a gaseous medium. Large volumes TPCs can be read out with a suitable number of channels offering a complete 3D reconstruction of an ultra-relativistic charged particle track, that is the sequence of its energy releases in the TPC gas volume. Moreover, He-based TPCs are very promising to study…
▽ More
The Time Projection Chamber (TPC) is an ideal candidate to finely study the charged particle ionization in a gaseous medium. Large volumes TPCs can be read out with a suitable number of channels offering a complete 3D reconstruction of an ultra-relativistic charged particle track, that is the sequence of its energy releases in the TPC gas volume. Moreover, He-based TPCs are very promising to study keV energy particles as nuclear recoils, opening the possibility for directional searches of Dark Matter (DM) and the study of Solar Neutrinos (SN).
In this paper, we report the analysis of the data acquired with a small TPC prototype (named LEMOn) built by the CYGNO collaboration that was exposed to a beam of 450 MeV electrons at the Beam Test Facility of National Laboratories of Frascati. LEMOn is operated with a He-CF4 mixture at atmospheric pressure and is based on a Gas Electron Multipliers amplification stage that produces visible light collected by a sub-millimeter position resolution scientific CMOS camera. This type of readout - in conjunction with a fast light detection - allows a 3D reconstruction of the electrons' tracks. The electrons are leaving a trail of segments of ionizations corresponding to a few keV energy releases each. Their study leads to predict a keV energy threshold and 1-10 mm longitudinal and 0.1-0.3 mm transverse position resolution for nuclear recoils, very promising for the application of optically readout TPC to DM searches and SN measurements.
△ Less
Submitted 10 March, 2021; v1 submitted 25 May, 2020;
originally announced May 2020.
-
First evidence of luminescence in a He/CF$_4$ gas mixture induced by non-ionizing electrons
Authors:
E. Baracchini,
L. Benussi,
S. Bianco,
C. Capoccia,
M. Caponero,
G. Cavoto,
A. Cortez,
I. A. Costa,
E. Di Marco,
G. D'Imperio,
G. Dho,
F. Iacoangeli,
G. Maccarrone,
M. Marafini,
G. Mazzitelli,
A. Messina,
A. Orlandi,
E. Paoletti,
L. Passamonti,
F. Petrucci,
D. Piccolo,
D. Pierluigi,
D. Pinci,
F. Renga,
F. Rosatelli
, et al. (3 additional authors not shown)
Abstract:
Optical readout of Gas Electron Multipliers (GEM) provides very interesting performances and has been proposed for different applications in particle physics. In particular, thanks to its good efficiency in the keV energy range, it is being developed for low-energy and rare event studies, such as Dark Matter search. So far, the optical approach exploits the light produced during the avalanche proc…
▽ More
Optical readout of Gas Electron Multipliers (GEM) provides very interesting performances and has been proposed for different applications in particle physics. In particular, thanks to its good efficiency in the keV energy range, it is being developed for low-energy and rare event studies, such as Dark Matter search. So far, the optical approach exploits the light produced during the avalanche processes in GEM channels. Further luminescence in the gas can be induced by electrons accelerated by a suitable electric field. The CYGNO collaboration studied this process with a combined use of a triple-GEM structure and a grid in an He/CF$_4$ (60/40) gas mixture at atmospheric pressure. Results reported in this paper allow to conclude that with an electric field of about 11~kV/cm a photon production mean free path of about 1.0~cm was found.
△ Less
Submitted 2 July, 2020; v1 submitted 22 April, 2020;
originally announced April 2020.
-
A 1 m$^3$ Gas Time Projection Chamber with Optical Readout for Directional Dark Matter Searches: the CYGNO Experiment
Authors:
E. Baracchini,
R. Bedogni,
F. Bellini,
L. Benussi,
S. Bianco,
C. Capoccia,
M. Caponero,
G. Cavoto,
I. A. Costa,
E. Di Marco,
G. D'Imperio,
F. Iacoangeli,
G. Maccarone,
M. Marafini,
G. Mazzitelli,
A. Messina,
A. Orlandi,
E. Paoletti,
L. Passamonti,
A. Pelosi,
F. Petrucci,
D. Piccolo,
D. Pierluigi,
D. Pinci,
F. Renga
, et al. (3 additional authors not shown)
Abstract:
The aim of the CYGNO project is the construction and operation of a 1~m$^3$ gas TPC for directional dark matter searches and coherent neutrino scattering measurements, as a prototype toward the 100-1000~m$^3$ (0.15-1.5 tons) CYGNUS network of underground experiments. In such a TPC, electrons produced by dark-matter- or neutrino-induced nuclear recoils will drift toward and will be multiplied by a…
▽ More
The aim of the CYGNO project is the construction and operation of a 1~m$^3$ gas TPC for directional dark matter searches and coherent neutrino scattering measurements, as a prototype toward the 100-1000~m$^3$ (0.15-1.5 tons) CYGNUS network of underground experiments. In such a TPC, electrons produced by dark-matter- or neutrino-induced nuclear recoils will drift toward and will be multiplied by a three-layer GEM structure, and the light produced in the avalanche processes will be readout by a sCMOS camera, providing a 2D image of the event with a resolution of a few hundred micrometers. Photomultipliers will also provide a simultaneous fast readout of the time profile of the light production, giving information about the third coordinate and hence allowing a 3D reconstruction of the event, from which the direction of the nuclear recoil and consequently the direction of the incoming particle can be inferred. Such a detailed reconstruction of the event topology will also allow a pure and efficient signal to background discrimination. These two features are the key to reach and overcome the solar neutrino background that will ultimately limit non-directional dark matter searches.
△ Less
Submitted 8 January, 2020;
originally announced January 2020.
-
CYGNO: Triple-GEM Optical Readout for Directional Dark Matter Search
Authors:
I. Abritta Costa,
E. Baracchini,
R. Bedogni,
F. Bellini,
L. Benussi,
S. Bianco,
M. Caponero,
G. Cavoto,
E. Di Marco,
G. D'Imperio,
G. Maccarrone,
M. Marafini,
G. Mazzitelli,
A. Messina,
F. Petrucci,
D. Piccolo,
D. Pinci,
F. Renga,
G. Saviano,
S. Tomassini
Abstract:
CYGNO is a project realising a cubic meter demonstrator to study the scalability of the performance of the optical approach for the readout of large-volume, GEM-equipped TPC. This is part of the CYGNUS proto-collaboration which aims at constructing a network of underground observatories for directional Dark Matter search. The combined use of high-granularity sCMOS and fast sensors for reading out…
▽ More
CYGNO is a project realising a cubic meter demonstrator to study the scalability of the performance of the optical approach for the readout of large-volume, GEM-equipped TPC. This is part of the CYGNUS proto-collaboration which aims at constructing a network of underground observatories for directional Dark Matter search. The combined use of high-granularity sCMOS and fast sensors for reading out the light produced in GEM channels during the multiplication processes was shown to allow on one hand to reconstruct 3D direction of the tracks, offering accurate energy measurements and sensitivity to the source directionality and, on the other hand, a high particle identification capability very useful to distinguish nuclear recoils. Results of the performed R&D and future steps toward a 30-100 cubic meter experiment will be presented.
△ Less
Submitted 21 October, 2019; v1 submitted 16 October, 2019;
originally announced October 2019.
-
Physically Impossible?
Authors:
D. Domenici,
G. Mazzitelli
Abstract:
Halfway between the experiment and the focus group, between the quiz and a game, we have experienced a new format to "focus" on sustainability and the fundamental laws of thermodynamics and its principles. Concepts as reversibility, efficiency and entropy, are then "visualized" by the participants, showing the relations with the economic value, waste, the energetics budget and raw material costs a…
▽ More
Halfway between the experiment and the focus group, between the quiz and a game, we have experienced a new format to "focus" on sustainability and the fundamental laws of thermodynamics and its principles. Concepts as reversibility, efficiency and entropy, are then "visualized" by the participants, showing the relations with the economic value, waste, the energetics budget and raw material costs are explained from a different point of view, proving the physical limits to the economic growth and the environmental exploitation.
△ Less
Submitted 5 July, 2019;
originally announced July 2019.
-
The Scientists' Experience in Participated Science Communication
Authors:
G. Mazzitelli,
P. Bolaffio,
G. Burzachechi,
I. Capra,
G. Ciocca,
A. Della Ceca,
R. Giovanditti,
C. Grasso,
D. Maselli,
G. Sanzone,
F. Spagnoli,
M. Tota
Abstract:
Since 2006 a small group of researchers from the Italian National Institute for Nuclear Physics started to realized one of the first European Researchers' Night in Europe: a one night-event, supported by the European Commission, that falls every last Friday of September to promote the researcher's figure and its work. Today, after thirteen editions, the project has evolved by involving more than 6…
▽ More
Since 2006 a small group of researchers from the Italian National Institute for Nuclear Physics started to realized one of the first European Researchers' Night in Europe: a one night-event, supported by the European Commission, that falls every last Friday of September to promote the researcher's figure and its work. Today, after thirteen editions, the project has evolved by involving more than 60 scientific partners and more than 400 events/year spread from the North to the South of Italy in 30 cities, captivating more than 50.000 attendees with a not negligible impact on the people and the press. During the years, the project has followed and sometimes anticipated the science communication trend, and BEES (BE a citizEn Scientist) is the last step of this long and thrilling evolution that brought to a huge public engagement in our territory. The experience, the methodology, and the major successful examples of the organized events are presented together with the results of the long term project impact.
△ Less
Submitted 5 July, 2019;
originally announced July 2019.
-
Performance of Optically Readout GEM-based TPC with a 55Fe source
Authors:
I. Abritta Costa,
E. Baracchini,
F. Bellini,
L. Benussi,
S. Bianco,
G. Cavoto,
E. Di Marco,
G. Maccarrone,
M. Marafini,
G. Mazzitelli,
A. Messina,
D. Piccolo,
D. Pinci,
F. Renga,
F. Rosatelli,
S. Tomassini
Abstract:
Optical readout of large Time Projection Chambers (TPCs) with multiple Gas Electron Multipliers (GEMs) amplification stages has shown to provide very interesting performances for high energy particle tracking. Proposed applications for low-energy and rare event studies, such as Dark Matter search, ask for demanding performance in the keV energy range. The performance of such a readout was studied…
▽ More
Optical readout of large Time Projection Chambers (TPCs) with multiple Gas Electron Multipliers (GEMs) amplification stages has shown to provide very interesting performances for high energy particle tracking. Proposed applications for low-energy and rare event studies, such as Dark Matter search, ask for demanding performance in the keV energy range. The performance of such a readout was studied in details as a function of the electric field configuration and GEM gain by using a $^{55}$Fe source within a 7 litre sensitive volume detector developed as a part of the R\&D for the CYGNUS project. Results reported in this paper show that the low noise level of the sensor allows to operate with a 2~keV threshold while kee** a rate of fake-events lesser than 10 per year. In this configuration, a detection efficiency well above 95\% along with an energy resolution ($σ$) of 18\% is obtained for the 5.9 keV photons, demonstrating the very promising capabilities of this technique.
△ Less
Submitted 4 June, 2019; v1 submitted 10 May, 2019;
originally announced May 2019.
-
Science Communication a New Frontier of Researcher's Job
Authors:
Giovanni Mazzitelli
Abstract:
In the world of communication, nobody can be out of the fray! Since many years science communication and more in general the ability of a researcher to communicate his/her work to founding agency, policy makers, entrepreneurs and public at large, starts to be a fundamental skill of the researchers job. This skill is needed and requested to access funds and successfully disseminate the research out…
▽ More
In the world of communication, nobody can be out of the fray! Since many years science communication and more in general the ability of a researcher to communicate his/her work to founding agency, policy makers, entrepreneurs and public at large, starts to be a fundamental skill of the researchers job. This skill is needed and requested to access funds and successfully disseminate the research outcome, as well as to engage society in understanding science and its benefits. Moreover, due to the large decrease of research funds and of people starting scientific carrier, researchers must be in the front line to promote the scientific culture in order to invert the dreadful trend of last years. Where are we and where are we going to? We try to answer such questions introducing successful models that can be used without huge overloads for our job. This paper reports on the experience of one of the largest and oldest project in Europe of the Marie Sklodowska-Curie Actions European Researchers' Night and describes how this project followed the evolution in science communication.
△ Less
Submitted 8 May, 2019;
originally announced May 2019.
-
12 Years of Data, Results and Experiences in the European Researchers' Night Project
Authors:
G. Mazzitelli,
S. Arnone,
M. Bramato,
I. Capra,
G. Ciocca,
A. Della Ceca,
R. Giovanditti,
C. Grasso,
D. Maselli,
G. Sanzone,
D. Sereni,
F. Spagnoli
Abstract:
Since twelve years the researchers of the Roman area organize the European Researchers' Night, a project funded by European Commission to discover science and meet researchers through an Europe-wide public event dedicated to fun learning. Since the first edition in 2006, when the National Laboratory of INFN's in Frascati hosted 4000 visitors the project is always grown up to 50,000 attendees and m…
▽ More
Since twelve years the researchers of the Roman area organize the European Researchers' Night, a project funded by European Commission to discover science and meet researchers through an Europe-wide public event dedicated to fun learning. Since the first edition in 2006, when the National Laboratory of INFN's in Frascati hosted 4000 visitors the project is always grown up to 50,000 attendees and more than 50 scientific partners. In the last edition, The Frascati Scienza association, which was born to coordinate the event, operated in over 30 Italian cities from south to north of the peninsula. In addition, the Made in Science project - European Research Week 2016/17 - has been the one of the largest project funded by the European Commission and it's often referred to as a model for organization and communication to the general public. The 12 yeas data collected and results obtained, as well as some of the most important experiences in public communication of science will be shown.
△ Less
Submitted 12 February, 2019; v1 submitted 17 January, 2019;
originally announced February 2019.
-
Results From Impact Assessment on Society and scientists of Frascati Scienza European Researchers' Night in Years 2006-2015
Authors:
G. Mazzitelli,
S. Arnone,
F. Bellini,
M. Faccini,
D. Maselli,
I. Paximadas,
F. Spagnoli
Abstract:
The aim of this paper is to present the impact achieved by Frascati Scienza Association on society and research through the European Researchers' Night project funded by the European Commission within the years 2006-2015. The project has been devoted to raise awareness of researchers' work, encourage the dialogue between researchers and citizens and the choice of young people to pursue a career in…
▽ More
The aim of this paper is to present the impact achieved by Frascati Scienza Association on society and research through the European Researchers' Night project funded by the European Commission within the years 2006-2015. The project has been devoted to raise awareness of researchers' work, encourage the dialogue between researchers and citizens and the choice of young people to pursue a career in science. The first scientific activities and cultural events took shape in 2006, under the coordination of the National Institute for Nuclear Physics (INFN), through the European Researchers' Night project, the most important and significant event to promote the role of the researcher and bring people of all ages closer to the scientific world. The positive and successful experience of the first two events, pushed the researchers and citizens of Frascati, where most of Italian research centers and infrastructures are located, to formally associate in the Frascati Scienza in 2008, who started to coordinate the event from 2008. Frascati Scienza was driven by the need to promote educational activities to citizens, young people and schools, in order to involve the general public in science and to bring researchers closer to society.
△ Less
Submitted 17 January, 2019;
originally announced January 2019.
-
MPGD Optical Read Out for Directional Dark Matter Search
Authors:
G. Mazzitelli,
E. Baracchini,
G. Cavoto,
E. Di Marco,
M. Marafini,
C. Mancini,
D. Pinci,
F. Renga,
S. Tomassini
Abstract:
The Time Projection method is an ideal candidate to track low energy release particles. Large volumes can be readout by means of a moderate number of channels providing a complete 3D reconstruction of the charged tracks within the sensitive volume. It allows the measurement not only of the total released energy but also of the energy release density along the tracks that can be very useful for par…
▽ More
The Time Projection method is an ideal candidate to track low energy release particles. Large volumes can be readout by means of a moderate number of channels providing a complete 3D reconstruction of the charged tracks within the sensitive volume. It allows the measurement not only of the total released energy but also of the energy release density along the tracks that can be very useful for particle identification and to solve the head-tail ambiguity of the tracks. Moreover, gas represents a very interesting target to study Dark Matter interactions. In gas, nuclear recoils can travel enough to give rise to tracks long enough to be acquired and reconstructed.
△ Less
Submitted 14 January, 2019;
originally announced January 2019.
-
CYGNO: a CYGNUs Collaboration 1 m^3 Module with Optical Readout for Directional Dark Matter Search
Authors:
E. Baracchini,
R. Bedogni,
F. Bellini,
L. Benussi,
S. Bianco,
L. Bignell,
M. Caponero,
G. Cavoto,
E. Di Marco,
C. Eldridge,
A. Ezeribe,
R. Gargana,
T. Gamble,
R. Gregorio,
G. Lane,
D. Loomba,
W. Lynch,
G. Maccarrone,
M. Marafini,
G. Mazzitelli,
A. Messina,
A. Mills,
K. Miuchi,
F. Petrucci,
D. Piccolo
, et al. (8 additional authors not shown)
Abstract:
The design of the project named CYGNO is presented. CYGNO is a new proposal supported by INFN, the Italian National Institute for Nuclear Physics, within CYGNUs proto-collaboration (CYGNUS-TPC) that aims to realize a distributed observatory in underground laboratories for directional Dark Matter (DM) search and the identification of the coherent neutrino scattering (CNS) from the Sun. CYGNO is one…
▽ More
The design of the project named CYGNO is presented. CYGNO is a new proposal supported by INFN, the Italian National Institute for Nuclear Physics, within CYGNUs proto-collaboration (CYGNUS-TPC) that aims to realize a distributed observatory in underground laboratories for directional Dark Matter (DM) search and the identification of the coherent neutrino scattering (CNS) from the Sun. CYGNO is one of the first prototypes in the road map to 100-1000 m^3 of CYGNUs and will be located at the National Laboratory of Gran Sasso (LNGS), in Italy, aiming to make significant advances in the technology of single phase gas-only time projection chambers (TPC) for the application to the detection of rare scattering events. In particular it will focus on a read-out technique based on Micro Pattern Gas Detector (MPGD) amplification of the ionization and on the visible light collection with a sub-mm position resolution sCMOS (scientific COMS) camera. This type of readout - in conjunction with a fast light detection - will allow on one hand to reconstruct 3D direction of the tracks, offering accurate sensitivity to the source directionality and, on the other hand, a high particle identification capability very useful to distinguish nuclear recoils.
△ Less
Submitted 24 September, 2019; v1 submitted 14 January, 2019;
originally announced January 2019.
-
PTOLEMY: A Proposal for Thermal Relic Detection of Massive Neutrinos and Directional Detection of MeV Dark Matter
Authors:
E. Baracchini,
M. G. Betti,
M. Biasotti,
A. Bosca,
F. Calle,
J. Carabe-Lopez,
G. Cavoto,
C. Chang,
A. G. Cocco,
A. P. Colijn,
J. Conrad,
N. D'Ambrosio,
P. F. de Salas,
M. Faverzani,
A. Ferella,
E. Ferri,
P. Garcia-Abia,
G. Garcia Gomez-Tejedor,
S. Gariazzo,
F. Gatti,
C. Gentile,
A. Giachero,
J. Gudmundsson,
Y. Hochberg,
Y. Kahn
, et al. (26 additional authors not shown)
Abstract:
We propose to achieve the proof-of-principle of the PTOLEMY project to directly detect the Cosmic Neutrino Background (CNB). Each of the technological challenges described in [1,2] will be targeted and hopefully solved by the use of the latest experimental developments and profiting from the low background environment provided by the LNGS underground site. The first phase will focus on the graphen…
▽ More
We propose to achieve the proof-of-principle of the PTOLEMY project to directly detect the Cosmic Neutrino Background (CNB). Each of the technological challenges described in [1,2] will be targeted and hopefully solved by the use of the latest experimental developments and profiting from the low background environment provided by the LNGS underground site. The first phase will focus on the graphene technology for a tritium target and the demonstration of TES microcalorimetry with an energy resolution of better than 0.05 eV for low energy electrons. These technologies will be evaluated using the PTOLEMY prototype, proposed for underground installation, using precision HV controls to step down the kinematic energy of endpoint electrons to match the calorimeter dynamic range and rate capabilities. The second phase will produce a novel implementation of the EM filter that is scalable to the full target size and which demonstrates intrinsic triggering capability for selecting endpoint electrons. Concurrent with the CNB program, we plan to exploit and develop the unique properties of graphene to implement an intermediate program for direct directional detection of MeV dark matter [3,4]. This program will evaluate the radio-purity and scalability of the graphene fabrication process with the goal of using recently identified ultra-high radio-purity CO2 sources. The direct detection of the CNB is a snapshot of early universe dynamics recorded by the thermal relic neutrino yield taken at a time that predates the epochs of Big Bang Nucleosynthesis, the Cosmic Microwave Background and the recession of galaxies (Hubble Expansion). Big Bang neutrinos are believed to have a central role in the evolution of the Universe and a direct measurement with PTOLEMY will unequivocally establish the extent to which these predictions match present-day neutrino densities.
△ Less
Submitted 6 August, 2018;
originally announced August 2018.
-
The AMY (Air Microwave Yield) experiment to measure the GHz emission from air shower plasma
Authors:
J. Alvarez-Muniz,
M. Blanco,
M. Bohacova,
B. Buonomo,
G. Cataldi,
M. R. Coluccia,
P. Creti,
I. De Mitri,
C. Di Giulio,
P. Facal San Luis,
L. Foggetta,
R. Gaior,
D. Garcia-Fernandez,
M. Iarlori,
S. Le Coz,
A. Letessier-Selvon,
K. Louedec,
I. C. Maris,
D. Martello,
G. Mazzitelli,
L. Perrone,
S. Petrera,
V. Rizi,
G. Rodriguez Fernandez,
F. Salamida
, et al. (6 additional authors not shown)
Abstract:
The aim of the Air Microwave Yield (AMY) experiment is to investigate the Molecular Bremsstrahlung Radiation (MBR) emitted from an electron beam induced air-shower. The measurements have been performed with a 510 MeV electron beam at the Beam Test Facility (BTF) of Frascati INFN National Laboratories in a wide frequency range between 1 and 20 GHz. We present the experimental apparatus and the firs…
▽ More
The aim of the Air Microwave Yield (AMY) experiment is to investigate the Molecular Bremsstrahlung Radiation (MBR) emitted from an electron beam induced air-shower. The measurements have been performed with a 510 MeV electron beam at the Beam Test Facility (BTF) of Frascati INFN National Laboratories in a wide frequency range between 1 and 20 GHz. We present the experimental apparatus and the first results of the measurements. Contrary to what have been reported in a previous similar experiment~\cite{Gorham-SLAC}, we have found that the intensity of the emission is strongly influenced by the particular time structure of the accelerator beam. This makes very difficult the interpretation of the emission process and a realistic extrapolation of the emission yield to the plasma generated during the development of an atmospheric shower.
△ Less
Submitted 21 July, 2018;
originally announced July 2018.
-
Calibration of AGILE-GRID with on-ground data and Monte Carlo simulations
Authors:
P. W. Cattaneo,
A. Rappoldi,
A. Argan,
G. Barbiellini,
F. Boffelli,
A. Bulgarelli,
B. Buonomo,
M. Cardillo,
A. W. Chen,
V. Cocco,
S. Colafrancesco,
F. D'Ammando,
I. Donnarumma,
A. Ferrari,
V. Fioretti,
L. Foggetta,
T. Froysland,
F. Fuschino,
M. Galli,
F. Gianotti,
A. Giuliani,
F. Longo,
F. Lucarelli,
M. Marisaldi,
G. Mazzitelli
, et al. (19 additional authors not shown)
Abstract:
AGILE is a mission of the Italian Space Agency (ASI) Scientific Program dedicated to gamma-ray astrophysics, operating in a low Earth orbit since April 23, 2007. It is designed to be a very light and compact instrument, capable of simultaneously detecting and imaging photons in the 18 keV to 60 keV X-ray energy band and in the 30 MeV{50 GeV gamma-ray energy with a good angular resolution (< 1 deg…
▽ More
AGILE is a mission of the Italian Space Agency (ASI) Scientific Program dedicated to gamma-ray astrophysics, operating in a low Earth orbit since April 23, 2007. It is designed to be a very light and compact instrument, capable of simultaneously detecting and imaging photons in the 18 keV to 60 keV X-ray energy band and in the 30 MeV{50 GeV gamma-ray energy with a good angular resolution (< 1 deg at 1 GeV). The core of the instrument is the Silicon Tracker complemented with a CsI calorimeter and a AntiCoincidence system forming the Gamma Ray Imaging Detector (GRID). Before launch, the GRID needed on-ground calibration with a tagged gamma-ray beam to estimate its performance and validate the Monte Carlo simulation. The GRID was calibrated using a tagged gamma-ray beam with energy up to 500 MeV at the Beam Test Facilities at the INFN Laboratori Nazionali di Frascati. These data are used to validate a GEANT3 based simulation by comparing the data and the Monte Carlo simulation by measuring the angular and energy resolutions. The GRID angular and energy resolutions obtained using the beam agree well with the Monte Carlo simulation. Therefore the simulation can be used to simulate the same performance on-light with high reliability.
△ Less
Submitted 28 May, 2018;
originally announced May 2018.
-
Combined readout of a triple-GEM detector
Authors:
Vasile C. Antochi,
Elisabetta Baracchini,
Gianluca Cavoto,
Emanuele Di Marco,
Michela Marafini,
Giovanni Mazzitelli,
Davide Pinci,
Francesco Renga,
Sandro Tomassini,
Cecilia Voena
Abstract:
Optical readout of GEM based devices by means of high granularity and low noise CMOS sensors allows to obtain very interesting tracking performance. Space resolution of the order of tens of $μ$m were measured on the GEM plane along with an energy resolution of 20%$÷$30%. The main limitation of CMOS sensors is represented by their poor information about time structure of the event. In this paper, t…
▽ More
Optical readout of GEM based devices by means of high granularity and low noise CMOS sensors allows to obtain very interesting tracking performance. Space resolution of the order of tens of $μ$m were measured on the GEM plane along with an energy resolution of 20%$÷$30%. The main limitation of CMOS sensors is represented by their poor information about time structure of the event. In this paper, the use of a concurrent light readout by means of a suitable photomultiplier and the acquisition of the electric signal induced on the GEM electrode are exploited to provide the necessary timing informations. The analysis of the PMT waveform allows a 3D reconstruction of each single clusters with a resolution on z of 100 $μ$m. Moreover, from the PMT signals it is possible to obtain a fast reconstruction of the energy released within the detector with a resolution of the order of 25% even in the tens of keV range useful, for example, for triggering purpose.
△ Less
Submitted 19 March, 2018;
originally announced March 2018.
-
Negative ion Time Projection Chamber operation with SF$_{6}$ at nearly atmospheric pressure
Authors:
E. Baracchini,
G. Cavoto,
G. Mazzitelli,
F. Murtas,
F. Renga,
S. Tomassini
Abstract:
We present measurements of drift velocities and mobilities of some innovative negative ion gas mixtures at nearly atmospheric pressure based on SF$_{6}$ as electronegative capture agent and of pure SF$_{6}$ at various pressures, performed with the NITEC detector. NITEC is a Time Projection Chamber with 5 cm drift distance readout by a GEMPix, a triple thin GEMs coupled to a Quad-Timepix chip, dire…
▽ More
We present measurements of drift velocities and mobilities of some innovative negative ion gas mixtures at nearly atmospheric pressure based on SF$_{6}$ as electronegative capture agent and of pure SF$_{6}$ at various pressures, performed with the NITEC detector. NITEC is a Time Projection Chamber with 5 cm drift distance readout by a GEMPix, a triple thin GEMs coupled to a Quad-Timepix chip, directly sensitive to the deposited charge on each of the 55 $\times$ 55 $μ$m$^2$ pixel. Our results contribute to expanding the knowledge on the innovative use of SF$_{6}$ as negative ion gas and extend to triple thin GEMs the possibility of negative ion operation for the first time. Above all, our findings show the feasibility of negative ion operation with He:CF$_4$:SF$_{6}$ at 610 Torr, opening extremely interesting possibility for next generation directional Dark Matter detectors at 1 bar.
△ Less
Submitted 5 October, 2017;
originally announced October 2017.
-
US Cosmic Visions: New Ideas in Dark Matter 2017: Community Report
Authors:
Marco Battaglieri,
Alberto Belloni,
Aaron Chou,
Priscilla Cushman,
Bertrand Echenard,
Rouven Essig,
Juan Estrada,
Jonathan L. Feng,
Brenna Flaugher,
Patrick J. Fox,
Peter Graham,
Carter Hall,
Roni Harnik,
JoAnne Hewett,
Joseph Incandela,
Eder Izaguirre,
Daniel McKinsey,
Matthew Pyle,
Natalie Roe,
Gray Rybka,
Pierre Sikivie,
Tim M. P. Tait,
Natalia Toro,
Richard Van De Water,
Neal Weiner
, et al. (226 additional authors not shown)
Abstract:
This white paper summarizes the workshop "U.S. Cosmic Visions: New Ideas in Dark Matter" held at University of Maryland on March 23-25, 2017.
This white paper summarizes the workshop "U.S. Cosmic Visions: New Ideas in Dark Matter" held at University of Maryland on March 23-25, 2017.
△ Less
Submitted 14 July, 2017;
originally announced July 2017.
-
Carbon nanotubes as target for directional detection of light WIMP
Authors:
V. C. Antochi,
E. Baracchini,
G. Cavoto,
E. Di Marco,
G. Mazzitelli,
D. Pinci,
A. D. Polosa,
F. Renga,
C. Voena
Abstract:
In this paper I will briefly introduce the idea of using Carbon Nanotubes (CNT) as target for the detection of low mass WIMPs with the additional information of directionality. I will also present the experimental efforts of develo** a Time Projection Chamber with a CNT target inside and the results of a test beam at the Beam Test Facility of INFN-LNF.
In this paper I will briefly introduce the idea of using Carbon Nanotubes (CNT) as target for the detection of low mass WIMPs with the additional information of directionality. I will also present the experimental efforts of develo** a Time Projection Chamber with a CNT target inside and the results of a test beam at the Beam Test Facility of INFN-LNF.
△ Less
Submitted 9 July, 2017;
originally announced July 2017.
-
Technical Design Report EuroGammaS proposal for the ELI-NP Gamma beam System
Authors:
O. Adriani,
S. Albergo,
D. Alesini,
M. Anania,
D. Angal-Kalinin,
P. Antici,
A. Bacci,
R. Bedogni,
M. Bellaveglia,
C. Biscari,
N. Bliss,
R. Boni,
M. Boscolo,
F. Broggi,
P. Cardarelli,
K. Cassou,
M. Castellano,
L. Catani,
I. Chaikovska,
E. Chiadroni,
R. Chiche,
A. Cianchi,
J. Clarke,
A. Clozza,
M. Coppola
, et al. (84 additional authors not shown)
Abstract:
The machine described in this document is an advanced Source of up to 20 MeV Gamma Rays based on Compton back-scattering, i.e. collision of an intense high power laser beam and a high brightness electron beam with maximum kinetic energy of about 720 MeV. Fully equipped with collimation and characterization systems, in order to generate, form and fully measure the physical characteristics of the pr…
▽ More
The machine described in this document is an advanced Source of up to 20 MeV Gamma Rays based on Compton back-scattering, i.e. collision of an intense high power laser beam and a high brightness electron beam with maximum kinetic energy of about 720 MeV. Fully equipped with collimation and characterization systems, in order to generate, form and fully measure the physical characteristics of the produced Gamma Ray beam. The quality, i.e. phase space density, of the two colliding beams will be such that the emitted Gamma ray beam is characterized by energy tunability, spectral density, bandwidth, polarization, divergence and brilliance compatible with the requested performances of the ELI-NP user facility, to be built in Romania as the Nuclear Physics oriented Pillar of the European Extreme Light Infrastructure. This document illustrates the Technical Design finally produced by the EuroGammaS Collaboration, after a thorough investigation of the machine expected performances within the constraints imposed by the ELI-NP tender for the Gamma Beam System (ELI-NP-GBS), in terms of available budget, deadlines for machine completion and performance achievement, compatibility with lay-out and characteristics of the planned civil engineering.
△ Less
Submitted 14 July, 2014;
originally announced July 2014.
-
Tau/Charm Factory Accelerator Report
Authors:
M. E. Biagini,
R. Boni,
M. Boscolo,
A. Chiarucci,
R. Cimino,
A. Clozza,
A. Drago,
S. Guiducci,
C. Ligi,
G. Mazzitelli,
R. Ricci,
C. Sanelli,
M. Serio,
A. Stella,
S. Tomassini,
S. Bini,
F. Cioeta,
D. Cittadino,
M. D'Agostino,
M. Del Franco,
A. Delle Piane,
E. Di Pasquale,
G. Frascadore,
S. Gazzana,
R. Gargana
, et al. (11 additional authors not shown)
Abstract:
The present Report concerns the current status of the Italian Tau/Charm accelerator project and in particular discusses the issues related to the lattice design, to the accelerators systems and to the associated conventional facilities. The project aims at realizing a variable energy Flavor Factory between 1 and 4.6 GeV in the center of mass, and succeeds to the SuperB project from which it inheri…
▽ More
The present Report concerns the current status of the Italian Tau/Charm accelerator project and in particular discusses the issues related to the lattice design, to the accelerators systems and to the associated conventional facilities. The project aims at realizing a variable energy Flavor Factory between 1 and 4.6 GeV in the center of mass, and succeeds to the SuperB project from which it inherits most of the solutions proposed in this document. The work comes from a cooperation involving the INFN Frascati National Laboratories accelerator experts, the young newcomers, mostly engineers, of the Cabibbo Lab consortium and key collaborators from external laboratories.
△ Less
Submitted 25 October, 2013;
originally announced October 2013.
-
The Air Microwave Yield (AMY) experiment - A laboratory measurement of the microwave emission from extensive air showers
Authors:
K. Louedec,
J. Alvarez-Muñiz,
M. Blanco,
M. Bohácová,
B. Buonomo,
G. Cataldi,
M. R. Coluccia,
P. Creti,
I. De Mitri,
C. Di Giulio,
P. Facal San Luis,
L. Foggetta,
R. Gaïor,
D. Garcia-Fernandez,
M. Iarlori,
S. Le Coz,
A. Letessier-Selvon,
I. C. Mariş,
D. Martello,
G. Mazzitelli,
M. Monasor,
L. Perrone,
R. Pesce,
S. Petrera,
P. Privitera
, et al. (9 additional authors not shown)
Abstract:
The AMY experiment aims to measure the microwave bremsstrahlung radiation (MBR) emitted by air-showers secondary electrons accelerating in collisions with neutral molecules of the atmosphere. The measurements are performed using a beam of 510 MeV electrons at the Beam Test Facility (BTF) of Frascati INFN National Laboratories. The goal of the AMY experiment is to measure in laboratory conditions t…
▽ More
The AMY experiment aims to measure the microwave bremsstrahlung radiation (MBR) emitted by air-showers secondary electrons accelerating in collisions with neutral molecules of the atmosphere. The measurements are performed using a beam of 510 MeV electrons at the Beam Test Facility (BTF) of Frascati INFN National Laboratories. The goal of the AMY experiment is to measure in laboratory conditions the yield and the spectrum of the GHz emission in the frequency range between 1 and 20 GHz. The final purpose is to characterise the process to be used in a next generation detectors of ultra-high energy cosmic rays. A description of the experimental setup and the first results are presented.
△ Less
Submitted 17 October, 2013;
originally announced October 2013.
-
IRIDE White Book, An Interdisciplinary Research Infrastructure based on Dual Electron linacs&lasers
Authors:
D. Alesini,
M. Alessandroni,
M. P. Anania,
S. Andreas,
M. Angelone,
A. Arcovito,
F. Arnesano,
M. Artioli,
L. Avaldi,
D. Babusci,
A. Bacci,
A. Balerna,
S. Bartalucci,
R. Bedogni,
M. Bellaveglia,
F. Bencivenga,
M. Benfatto,
S. Biedron,
V. Bocci,
M. Bolognesi,
P. Bolognesi,
R. Boni,
R. Bonifacio,
M. Boscolo,
F. Boscherini
, et al. (189 additional authors not shown)
Abstract:
This report describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity 'particle factory', based on a combination of a high duty cycle radio-frequency superconducting electron linac and of high ener…
▽ More
This report describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity 'particle factory', based on a combination of a high duty cycle radio-frequency superconducting electron linac and of high energy lasers. Conceived to provide unique research possibilities for particle physics, for condensed matter physics, chemistry and material science, for structural biology and industrial applications, IRIDE will open completely new research possibilities and advance our knowledge in many branches of science and technology. IRIDE will contribute to open new avenues of discoveries and to address most important riddles: What does matter consist of? What is the structure of proteins that have a fundamental role in life processes? What can we learn from protein structure to improve the treatment of diseases and to design more efficient drugs? But also how does an electronic chip behave under the effect of radiations? How can the heat flow in a large heat exchanger be optimized? The scientific potential of IRIDE is far reaching and justifies the construction of such a large facility in Italy in synergy with the national research institutes and companies and in the framework of the European and international research. It will impact also on R&D work for ILC, FEL, and will be complementarity to other large scale accelerator projects. IRIDE is also intended to be realized in subsequent stages of development depending on the assigned priorities.
△ Less
Submitted 30 July, 2013;
originally announced July 2013.
-
Measurement of the thermal expansion coefficient of an Al-Mg alloy at ultra-low temperatures
Authors:
Massimo Bassan,
Bruno Buonomo,
Giorgio Cavallari,
Eugenio Coccia,
Sabrina D'Antonio,
Viviana Fafone,
Luca Gennaro Foggetta,
Carlo Ligi,
Alessandro Marini,
Giovanni Mazzitelli,
Giuseppina Modestino,
Guido Pizzella,
Lina Quintieri,
Francesco Ronga,
Paolo Valente
Abstract:
We describe a result coming from an experiment based on an Al-Mg alloy (~ 5% Mg) suspended bar hit by an electron beam and operated above and below the termperature of transition from superconducting to normal state of the material. The amplitude of the bar first longitudinal mode of oscillation, excited by the beam interacting with the bulk, and the energy deposited by the beam in the bar are the…
▽ More
We describe a result coming from an experiment based on an Al-Mg alloy (~ 5% Mg) suspended bar hit by an electron beam and operated above and below the termperature of transition from superconducting to normal state of the material. The amplitude of the bar first longitudinal mode of oscillation, excited by the beam interacting with the bulk, and the energy deposited by the beam in the bar are the quantities measured by the experiment. These quantities, inserted in the equations describing the mechanism of the mode excitation and complemented by an independent measurement of the specific heat, allow us to determine the linear expansion coefficient of the material.
△ Less
Submitted 11 March, 2013; v1 submitted 3 December, 2012;
originally announced December 2012.
-
First results about on-ground calibration of the Silicon Tracker for the AGILE satellite
Authors:
AGILE Collaboration,
P. W. Cattaneo,
A. Argan,
F. Boffelli,
A. Bulgarelli,
B. Buonomo,
A. W. Chen,
F. D'Ammando,
T. Froysland,
F. Fuschino,
M. Galli,
F. Gianotti,
A. Giuliani,
F. Longo,
M. Marisaldi,
G. Mazzitelli,
A. Pellizzoni,
M. Prest,
G. Pucella,
L. Quintieri,
A. Rappoldi,
M. Tavani,
M. Trifoglio,
A. Trois,
P. Valente
, et al. (43 additional authors not shown)
Abstract:
The AGILE scientific instrument has been calibrated with a tagged $γ$-ray beam at the Beam Test Facility (BTF) of the INFN Laboratori Nazionali di Frascati (LNF). The goal of the calibration was the measure of the Point Spread Function (PSF) as a function of the photon energy and incident angle and the validation of the Monte Carlo (MC) simulation of the silicon tracker operation. The calibration…
▽ More
The AGILE scientific instrument has been calibrated with a tagged $γ$-ray beam at the Beam Test Facility (BTF) of the INFN Laboratori Nazionali di Frascati (LNF). The goal of the calibration was the measure of the Point Spread Function (PSF) as a function of the photon energy and incident angle and the validation of the Monte Carlo (MC) simulation of the silicon tracker operation. The calibration setup is described and some preliminary results are presented.
△ Less
Submitted 12 December, 2011;
originally announced December 2011.
-
Characterization of a tagged $γ$-ray beam line at the DA$Φ$NE Beam Test Facility
Authors:
P. W. Cattaneo,
A. Argan,
F. Boffelli,
A. Bulgarelli,
B. Buonomo,
A. W. Chen,
F. D'Ammando,
T. Froysland,
F. Fuschino,
M. Galli,
F. Gianotti,
A. Giuliani,
F. Longo,
M. Marisaldi,
G. Mazzitelli,
A. Pellizzoni,
M. Prest,
G. Pucella,
L. Quintieri,
A. Rappoldi,
M. Tavani,
M. Trifoglio,
A. Trois,
P. Valente,
E. Vallazza
, et al. (42 additional authors not shown)
Abstract:
At the core of the AGILE scientific instrument, designed to operate on a satellite, there is the Gamma Ray Imaging Detector (GRID) consisting of a Silicon Tracker (ST), a Cesium Iodide Mini-Calorimeter and an Anti-Coincidence system of plastic scintillator bars. The ST needs an on-ground calibration with a $γ$-ray beam to validate the simulation used to calculate the energy response function and t…
▽ More
At the core of the AGILE scientific instrument, designed to operate on a satellite, there is the Gamma Ray Imaging Detector (GRID) consisting of a Silicon Tracker (ST), a Cesium Iodide Mini-Calorimeter and an Anti-Coincidence system of plastic scintillator bars. The ST needs an on-ground calibration with a $γ$-ray beam to validate the simulation used to calculate the energy response function and the effective area versus the energy and the direction of the $γ$ rays. A tagged $γ$-ray beam line was designed at the Beam Test Facility (BTF) of the INFN Laboratori Nazionali of Frascati (LNF), based on an electron beam generating $γ$ rays through bremsstrahlung in a position-sensitive target. The $γ$-ray energy is deduced by difference with the post-bremsstrahlung electron energy \cite{prest}-\cite{hasan}. The electron energy is measured by a spectrometer consisting of a dipole magnet and an array of position sensitive silicon strip detectors, the Photon Tagging System (PTS). The use of the combined BTF-PTS system as tagged photon beam requires understanding the efficiency of $γ$-ray tagging, the probability of fake tagging, the energy resolution and the relation of the PTS hit position versus the $γ$-ray energy. This paper describes this study comparing data taken during the AGILE calibration occurred in 2005 with simulation.
△ Less
Submitted 19 January, 2012; v1 submitted 26 November, 2011;
originally announced November 2011.
-
Vibrational excitation induced by electron beam and cosmic rays in normal and superconductive aluminum bars
Authors:
M. Bassan,
B. Buonomo,
G. Cavallari,
E. Coccia,
S. D'Antonio,
V. Fafone,
L. G. Foggetta,
C. Ligi,
A. Marini,
G. Mazzitelli,
G. Modestino,
G. Pizzella,
L. Quintieri,
F. Ronga,
P. Valente,
S. M. Vinko
Abstract:
We report new measurements of the acoustic excitation of an Al5056 superconductive bar when hit by an electron beam, in a previously unexplored temperature range, down to 0.35 K. These data, analyzed together with previous results of the RAP experiment obtained for T > 0.54 K, show a vibrational response enhanced by a factor 4.9 with respect to that measured in the normal state. This enhancement e…
▽ More
We report new measurements of the acoustic excitation of an Al5056 superconductive bar when hit by an electron beam, in a previously unexplored temperature range, down to 0.35 K. These data, analyzed together with previous results of the RAP experiment obtained for T > 0.54 K, show a vibrational response enhanced by a factor 4.9 with respect to that measured in the normal state. This enhancement explains the anomalous large signals due to cosmic rays previously detected in the NAUTILUS gravitational wave detector.
△ Less
Submitted 2 August, 2011; v1 submitted 24 May, 2011;
originally announced May 2011.
-
Proposal for taking data with the KLOE-2 detector at the DA$Φ$NE collider upgraded in energy
Authors:
D. Babusci,
C. Bini,
F. Bossi,
G. Isidori,
D. Moricciani,
F. Nguyen,
P. Raimondi,
G. Venanzoni,
D. Alesini,
F. Archilli,
D. Badoni,
R. Baldini-Ferroli,
M. Bellaveglia,
G. Bencivenni,
M. Bertani,
M. Biagini,
C. Biscari,
C. Bloise,
V. Bocci,
R. Boni,
M. Boscolo,
P. Branchini,
A. Budano,
S. A. Bulychjev,
B. Buonomo
, et al. (97 additional authors not shown)
Abstract:
This document reviews the physics program of the KLOE-2 detector at DA$Φ$NE upgraded in energy and provides a simple solution to run the collider above the $φ$-peak (up to 2, possibly 2.5 GeV). It is shown how a precise measurement of the multihadronic cross section in the energy region up to 2 (possibly 2.5) GeV would have a major impact on the tests of the Standard Model through a precise determ…
▽ More
This document reviews the physics program of the KLOE-2 detector at DA$Φ$NE upgraded in energy and provides a simple solution to run the collider above the $φ$-peak (up to 2, possibly 2.5 GeV). It is shown how a precise measurement of the multihadronic cross section in the energy region up to 2 (possibly 2.5) GeV would have a major impact on the tests of the Standard Model through a precise determination of the anomalous magnetic moment of the muon and the effective fine-structure constant at the $M_Z$ scale. With a luminosity of about $10^{32}$cm$^{-2}$s$^{-1}$, DA$Φ$NE upgraded in energy can perform a scan in the region from 1 to 2.5 GeV in one year by collecting an integrated luminosity of 20 pb$^{-1}$ (corresponding to a few days of data taking) for single point, assuming an energy step of 25 MeV. A few years of data taking in this region would provide important tests of QCD and effective theories by $γγ$ physics with open thresholds for pseudo-scalar (like the $η'$), scalar ($f_0,f'_0$, etc...) and axial-vector ($a_1$, etc...) mesons; vector-mesons spectroscopy and baryon form factors; tests of CVC and searches for exotics. In the final part of the document a technical solution for the energy upgrade of DA$Φ$NE is proposed.
△ Less
Submitted 29 July, 2010;
originally announced July 2010.
-
Da$Φ$ne developments for the KLOE-2 experimental run
Authors:
C. Milardi,
D. Alesini,
M. E. Biagini,
C. Biscari,
R. Boni,
M. Boscolo,
F. Bossi,
B. Buonomo,
A. Clozza,
G. Delle Monache,
T. Demma,
E. Di Pasquale,
G. Di Pirro,
A. Drago,
M. Esposito,
A. Gallo,
A. Ghigo,
S. Guiducci,
C. Ligi,
F. Marcellini,
G. Mazzitelli,
L. Pellegrino,
M. Preger,
L. Quintieri,
P. Raimondi
, et al. (16 additional authors not shown)
Abstract:
Recently the peak luminosity achieved on the DAΦNE collider has been improved by almost a factor three by implementing a novel collision scheme based on large Piwinski angle and Crab-Waist. This encouraging result opened new perspectives for physics research and a new run with the KLOE-2 detector has been scheduled to start by spring 2010. The KLOE-2 installation is a complex operation requiring a…
▽ More
Recently the peak luminosity achieved on the DAΦNE collider has been improved by almost a factor three by implementing a novel collision scheme based on large Piwinski angle and Crab-Waist. This encouraging result opened new perspectives for physics research and a new run with the KLOE-2 detector has been scheduled to start by spring 2010. The KLOE-2 installation is a complex operation requiring a careful design effort and a several months long shutdown. The high luminosity interaction region has been deeply revised in order to take into account the effect on the beam caused by the solenoidal field of the experimental detector and to ensure background rejection. The shutdown has been also used to implement several other modifications aimed at improving beam dynamics: the wiggler poles have been displaced from the magnet axis in order to cancel high order terms in the field, the feedback systems have been equipped with stronger power supplies and more efficient kickers and electrodes have been inserted inside the wiggler and the dipole vacuum chambers, in the positron ring, to avoid the e-cloud formation. A low level RF feedback has been added to the cavity control in both rings.
△ Less
Submitted 8 June, 2010;
originally announced June 2010.
-
Measurement of the luminosity at the DAFNE collider upgraded with the crab waist scheme
Authors:
M. Boscolo,
F. Bossi,
B. Buonomo,
G. Mazzitelli,
F. Murtas,
P. Raimondi,
G. Sensolini,
M. Schioppa,
F. Iacoangeli,
P. Valente,
N. Arnaud,
D. Breton,
L. Burmistrov,
A. Stocchi,
A. Variola,
B. Viaud,
P. Branchini
Abstract:
The test of the crab waist collision scheme, undergoing at the e+e- Frascati DAFNE accelerator complex since February 2008, requires a fast and accurate measurement of the absolute luminosity, as well as a full characterization of the background conditions. Three different monitors, a Bhabha calorimeter, a Bhabha GEM tracker and a gamma bremsstrahlung proportional counter have been designed, tes…
▽ More
The test of the crab waist collision scheme, undergoing at the e+e- Frascati DAFNE accelerator complex since February 2008, requires a fast and accurate measurement of the absolute luminosity, as well as a full characterization of the background conditions. Three different monitors, a Bhabha calorimeter, a Bhabha GEM tracker and a gamma bremsstrahlung proportional counter have been designed, tested and installed around the interaction point end of 2007-beginning of 2008. In this paper, we describe these detectors and present their performances in various operation conditions during the 2008 and 2009 DAFNE runs.
△ Less
Submitted 10 September, 2009;
originally announced September 2009.
-
Experimental study of high energy electron interactions in a superconducting aluminum alloy resonant bar
Authors:
M. Barucci,
M. Bassan,
B. Buonomo,
G. Cavallari,
E. Coccia,
S. D'Antonio,
V. Fafone,
C. Ligi,
L. Lolli,
A. Marini,
G. Mazzitelli,
G. Modestino,
G. Pizzella,
L. Quintieri,
L. Risegari,
A. Rocchi,
F. Ronga,
P. Valente,
G. Ventura,
S. M. Vinko
Abstract:
Peak amplitude measurements of the fundamental mode of oscillation of a suspended aluminum alloy bar hit by an electron beam show that the amplitude is enhanced by a factor ~3.5 when the material is in the superconducting state. This result is consistent with the cosmic ray observations made by the resonant gravitational wave detector NAUTILUS, made of the same alloy, when operated in the superc…
▽ More
Peak amplitude measurements of the fundamental mode of oscillation of a suspended aluminum alloy bar hit by an electron beam show that the amplitude is enhanced by a factor ~3.5 when the material is in the superconducting state. This result is consistent with the cosmic ray observations made by the resonant gravitational wave detector NAUTILUS, made of the same alloy, when operated in the superconducting state. A comparison of the experimental data with the predictions of the model describing the underlying physical process is also presented.
△ Less
Submitted 9 January, 2009;
originally announced January 2009.
-
Detection of high energy cosmic rays with the resonant gravitational wave detector NAUTILUS and EXPLORER
Authors:
P. Astone,
D. Babusci,
M. Bassan,
P. Bonifazi,
G. Cavallari,
E. Coccia,
S. D'Antonio,
V. Fafone,
G. Giordano,
C. Ligi,
A. Marini,
G. Mazzitelli,
Y. Minenkov,
I. Modena,
G. Modestino,
A. Moleti,
G. V. Pallottino,
G. Pizzella,
L. Quintieri,
A. Rocchi,
F. Ronga,
R. Terenzi,
M. Visco
Abstract:
The cryogenic resonant gravitational wave detectors NAUTILUS and EXPLORER, made of an aluminum alloy bar, can detect cosmic ray showers. At temperatures above 1 K, when the material is in the normal conducting state, the measured signals are in good agreement with the values expected based on the cosmic rays data and on the thermo-acoustic model. When NAUTILUS was operated at the temperature of…
▽ More
The cryogenic resonant gravitational wave detectors NAUTILUS and EXPLORER, made of an aluminum alloy bar, can detect cosmic ray showers. At temperatures above 1 K, when the material is in the normal conducting state, the measured signals are in good agreement with the values expected based on the cosmic rays data and on the thermo-acoustic model. When NAUTILUS was operated at the temperature of 0.14 K, in superconductive state, large signals produced by cosmic ray interactions, more energetic than expected, were recorded. The NAUTILUS data in this case are in agreement with the measurements done by a dedicated experiment on a particle beam. The biggest recorded event was in EXPLORER and excited the first longitudinal mode to a vibrational energy of about 670 K, corresponding to about 360 TeV absorbed in the bar. Cosmic rays can be an important background in future acoustic detectors of improved sensitivity. At present, they represent a useful tool to verify the gravitational wave antenna performance.
△ Less
Submitted 14 June, 2008; v1 submitted 9 June, 2008;
originally announced June 2008.
-
Particle acoustic detection in gravitational wave aluminum resonant antennas
Authors:
B. Buonomo,
E. Coccia,
S. D'Antonio,
G. Delle Monache,
D. Di Gioacchino,
V. Fafone,
C. Ligi,
A. Marini,
G. Mazzitelli,
G. Modestino,
S. Panella,
G. Pizzella,
L. Quintieri,
S. Roccella,
F. Ronga,
P. Tripodi,
P. Valente
Abstract:
The results on cosmic rays detected by the gravitational antenna NAUTILUS have motivated an experiment (RAP) based on a suspended cylindrical bar, which is made of the same aluminum alloy as NAUTILUS and is exposed to a high energy electron beam. Mechanical vibrations originate from the local thermal expansion caused by warming up due to the energy lost by particles crossing the material. The ai…
▽ More
The results on cosmic rays detected by the gravitational antenna NAUTILUS have motivated an experiment (RAP) based on a suspended cylindrical bar, which is made of the same aluminum alloy as NAUTILUS and is exposed to a high energy electron beam. Mechanical vibrations originate from the local thermal expansion caused by warming up due to the energy lost by particles crossing the material. The aim of the experiment is to measure the amplitude of the fundamental longitudinal vibration at different temperatures. We report on the results obtained down to a temperature of about 4 K, which agree at the level of about 10% with the predictions of the model describing the underlying physical process.
△ Less
Submitted 2 May, 2005;
originally announced May 2005.
-
A Scintillating-fiber Beam Profile Monitor for the DAFNE BTF
Authors:
M. Anelli,
B. Buonomo,
G. Mazzitelli,
P. Valente
Abstract:
A scintillating-fiber beam profile detector has been designed, built and tested, for the monitoring of the position and size of the electron beam of the DAFNE, the recently commissioned electron beam-test facility at the Frascati LNF. A description of the detector construction and assembly, together with the results achieved during the 2003-2004 run, are here reported.
A scintillating-fiber beam profile detector has been designed, built and tested, for the monitoring of the position and size of the electron beam of the DAFNE, the recently commissioned electron beam-test facility at the Frascati LNF. A description of the detector construction and assembly, together with the results achieved during the 2003-2004 run, are here reported.
△ Less
Submitted 25 November, 2004;
originally announced November 2004.
-
Design considerations for future DAFNE upgrade
Authors:
D. Alesini,
G. Benedetti,
M. E. Biagini,
C. Biscari,
R. Boni,
M. Boscolo,
A. Clozza,
G. Delle Monache,
G. Di Pirro,
A. Drago,
A. Gallo,
A. Ghigo,
S. Guiducci,
M. Incurvati,
E. Levichev,
C. Ligi,
F. Marcellini,
G. Mazzitelli,
C. Milardi,
L. Pellegrino,
M. A. Preger,
P. Raimondi,
R. Ricci,
U. Rotundo,
C. Sanelli
, et al. (10 additional authors not shown)
Abstract:
The Frascati F-Factory DAFNE has been delivering luminosity to the KLOE, DEAR and FINUDA experiments since year 2000. Since April 2004 the KLOE run has been resumed and recently peak luminosity of 1.0x1032 cm-2s-1 and integrated luminosity of 6.2 pb-1/day have been achieved. The scientific program of the three high-energy experiments sharing DAFNE operation will be completed approximately by the…
▽ More
The Frascati F-Factory DAFNE has been delivering luminosity to the KLOE, DEAR and FINUDA experiments since year 2000. Since April 2004 the KLOE run has been resumed and recently peak luminosity of 1.0x1032 cm-2s-1 and integrated luminosity of 6.2 pb-1/day have been achieved. The scientific program of the three high-energy experiments sharing DAFNE operation will be completed approximately by the end of year 2006. A scientific program for DAFNE beyond that date has not been defined yet and it is matter of discussion in the high-energy physics and accelerator physics communities. In this paper we present some future scenarios for DAFNE, discussing the expected ultimate performances of the machine as it is now and addressing the design for an energy and/or luminosity upgrade. The options presented in the following are not exhaustive and they are intended to give a glance of what is doable using the existing infrastructures.
△ Less
Submitted 17 November, 2004;
originally announced November 2004.