-
PrAViC: Probabilistic Adaptation Framework for Real-Time Video Classification
Authors:
Magdalena Trędowicz,
Łukasz Struski,
Marcin Mazur,
Szymon Janusz,
Arkadiusz Lewicki,
Jacek Tabor
Abstract:
Video processing is generally divided into two main categories: processing of the entire video, which typically yields optimal classification outcomes, and real-time processing, where the objective is to make a decision as promptly as possible. The latter is often driven by the need to identify rapidly potential critical or dangerous situations. These could include machine failure, traffic acciden…
▽ More
Video processing is generally divided into two main categories: processing of the entire video, which typically yields optimal classification outcomes, and real-time processing, where the objective is to make a decision as promptly as possible. The latter is often driven by the need to identify rapidly potential critical or dangerous situations. These could include machine failure, traffic accidents, heart problems, or dangerous behavior. Although the models dedicated to the processing of entire videos are typically well-defined and clearly presented in the literature, this is not the case for online processing, where a plethora of hand-devised methods exist. To address this, we present \our{}, a novel, unified, and theoretically-based adaptation framework for dealing with the online classification problem for video data. The initial phase of our study is to establish a robust mathematical foundation for the theory of classification of sequential data, with the potential to make a decision at an early stage. This allows us to construct a natural function that encourages the model to return an outcome much faster. The subsequent phase is to demonstrate a straightforward and readily implementable method for adapting offline models to online and recurrent operations. Finally, by comparing the proposed approach to the non-online state-of-the-art baseline, it is demonstrated that the use of \our{} encourages the network to make earlier classification decisions without compromising accuracy.
△ Less
Submitted 17 June, 2024;
originally announced June 2024.
-
NegGS: Negative Gaussian Splatting
Authors:
Artur Kasymov,
Bartosz Czekaj,
Marcin Mazur,
Jacek Tabor,
Przemysław Spurek
Abstract:
One of the key advantages of 3D rendering is its ability to simulate intricate scenes accurately. One of the most widely used methods for this purpose is Gaussian Splatting, a novel approach that is known for its rapid training and inference capabilities. In essence, Gaussian Splatting involves incorporating data about the 3D objects of interest into a series of Gaussian distributions, each of whi…
▽ More
One of the key advantages of 3D rendering is its ability to simulate intricate scenes accurately. One of the most widely used methods for this purpose is Gaussian Splatting, a novel approach that is known for its rapid training and inference capabilities. In essence, Gaussian Splatting involves incorporating data about the 3D objects of interest into a series of Gaussian distributions, each of which can then be depicted in 3D in a manner analogous to traditional meshes. It is regrettable that the use of Gaussians in Gaussian Splatting is currently somewhat restrictive due to their perceived linear nature. In practice, 3D objects are often composed of complex curves and highly nonlinear structures. This issue can to some extent be alleviated by employing a multitude of Gaussian components to reflect the complex, nonlinear structures accurately. However, this approach results in a considerable increase in time complexity. This paper introduces the concept of negative Gaussians, which are interpreted as items with negative colors. The rationale behind this approach is based on the density distribution created by dividing the probability density functions (PDFs) of two Gaussians, which we refer to as Diff-Gaussian. Such a distribution can be used to approximate structures such as donut and moon-shaped datasets. Experimental findings indicate that the application of these techniques enhances the modeling of high-frequency elements with rapid color transitions. Additionally, it improves the representation of shadows. To the best of our knowledge, this is the first paper to extend the simple elipsoid shapes of Gaussian Splatting to more complex nonlinear structures.
△ Less
Submitted 30 May, 2024; v1 submitted 28 May, 2024;
originally announced May 2024.
-
qtOCT: quantitative transmission optical coherence tomography
Authors:
Wojciech Krauze,
Martyna Mazur,
Arkadiusz Kuś
Abstract:
Transmission optical coherence tomography (OCT) enables analysis of biological specimens in vitro through detection of forward scattered light. Up to now, transmission OCT was considered as a technique that cannot directly retrieve quantitative phase and is thus a qualitative method. In this paper, we present qtOCT, a novel quantitative transmission optical coherence tomography method. Unlike exis…
▽ More
Transmission optical coherence tomography (OCT) enables analysis of biological specimens in vitro through detection of forward scattered light. Up to now, transmission OCT was considered as a technique that cannot directly retrieve quantitative phase and is thus a qualitative method. In this paper, we present qtOCT, a novel quantitative transmission optical coherence tomography method. Unlike existing approaches, qtOCT allows for a direct, easy, fast and rigorous retrieval of 2D integrated phase information from transmission full-field swept-source OCT measurements. Our method is based on coherence gating and allows user-defined temporal measurement range selection, making it potentially suitable for analyzing multiple-scattering samples. We demonstrate high consistency between qtOCT and digital holographic microscopy phase images. This approach enhances transmission OCT capabilities, positioning it as a viable alternative to quantitative phase imaging techniques.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
Net 835-Gb/s/λ Carrier- and LO-Free 100-km Transmission Using Channel-Aware Phase Retrieval Reception
Authors:
Hanzi Huang,
Haoshuo Chen,
Qian Hu,
Di Che,
Yetian Huang,
Brian Stern,
Nicolas K. Fontaine,
Mikael Mazur,
Lauren Dallachiesa,
Roland Ryf,
Zhengxuan Li,
Yingxiong Song
Abstract:
We experimentally demonstrate the first carrier- and LO-free 800G/λ receiver enabling direct compatibility with standard coherent transmitters via phase retrieval, achieving net 835-Gb/s transmission over 100-km SMF and record 8.27-b/s/Hz net optical spectral efficiency.
We experimentally demonstrate the first carrier- and LO-free 800G/λ receiver enabling direct compatibility with standard coherent transmitters via phase retrieval, achieving net 835-Gb/s transmission over 100-km SMF and record 8.27-b/s/Hz net optical spectral efficiency.
△ Less
Submitted 10 April, 2024;
originally announced April 2024.
-
HyperPlanes: Hypernetwork Approach to Rapid NeRF Adaptation
Authors:
Paweł Batorski,
Dawid Malarz,
Marcin Przewięźlikowski,
Marcin Mazur,
Sławomir Tadeja,
Przemysław Spurek
Abstract:
Neural radiance fields (NeRFs) are a widely accepted standard for synthesizing new 3D object views from a small number of base images. However, NeRFs have limited generalization properties, which means that we need to use significant computational resources to train individual architectures for each item we want to represent. To address this issue, we propose a few-shot learning approach based on…
▽ More
Neural radiance fields (NeRFs) are a widely accepted standard for synthesizing new 3D object views from a small number of base images. However, NeRFs have limited generalization properties, which means that we need to use significant computational resources to train individual architectures for each item we want to represent. To address this issue, we propose a few-shot learning approach based on the hypernetwork paradigm that does not require gradient optimization during inference. The hypernetwork gathers information from the training data and generates an update for universal weights. As a result, we have developed an efficient method for generating a high-quality 3D object representation from a small number of images in a single step. This has been confirmed by direct comparison with the state-of-the-art solutions and a comprehensive ablation study.
△ Less
Submitted 2 February, 2024;
originally announced February 2024.
-
The Golden Meteorite Fall: Fireball Trajectory, Orbit and Meteorite Characterization
Authors:
P. G. Brown,
P. J. A. McCausland,
A. R Hildebrand,
L. T. J. Hanton,
L. M. Eckart,
H. Busemann,
D. Krietsch,
C. Maden,
K. Welten,
M. W. Caffee,
M. Laubenstein,
D. Vida,
F. Ciceri,
E. Silber,
C. D. K. Herd,
P. Hill,
H. Devillepoix,
Eleanor K. Sansom,
Martin Cupák,
Seamus Anderson,
R. L. Flemming,
A. J. Nelson,
M. Mazur,
D. E. Moser,
W. J. Cooke
, et al. (4 additional authors not shown)
Abstract:
The Golden (British Columbia, Canada) meteorite fall occurred on Oct 4, 2021 at 0534 UT with the first recovered fragment (1.3 kg) landing on an occupied bed. The meteorite is an unbrecciated, low-shock (S2) ordinary chondrite of intermediate composition, typed as an L/LL5. From noble gas measurements the cosmic ray exposure age is 25 Ma while gas retention ages are all >2 Ga. Short-lived radionuc…
▽ More
The Golden (British Columbia, Canada) meteorite fall occurred on Oct 4, 2021 at 0534 UT with the first recovered fragment (1.3 kg) landing on an occupied bed. The meteorite is an unbrecciated, low-shock (S2) ordinary chondrite of intermediate composition, typed as an L/LL5. From noble gas measurements the cosmic ray exposure age is 25 Ma while gas retention ages are all >2 Ga. Short-lived radionuclides and noble gas measurements of the pre-atmospheric size overlap with estimates from infrasound and lightcurve modelling producing a preferred pre-atmospheric mass of 70-200 kg. The orbit of Golden has a high inclination (23.5 degs) and is consistent with delivery from the inner main belt. The highest probability (60%) of an origin is from the Hungaria group. We propose that Golden may originate among the background S-type asteroids found interspersed in the Hungaria region. The current collection of 18 L and LL chondrite orbits shows a strong preference for origins in the inner main belt, suggesting multiple parent bodies may be required to explain the diversity in CRE ages and shock states.
△ Less
Submitted 26 October, 2023;
originally announced October 2023.
-
Distortion-Aware Phase Retrieval Receiver for High-Order QAM Transmission with Carrierless Intensity-Only Measurements
Authors:
Hanzi Huang,
Haoshuo Chen,
Qi Gao,
Yetian Huang,
Nicolas K. Fontaine,
Mikael Mazur,
Lauren Dallachiesa,
Roland Ryf,
Zhengxuan Li,
Yingxiong Song
Abstract:
We experimentally investigate transmitting high-order quadrature amplitude modulation (QAM) signals with carrierless and intensity-only measurements with phase retrieval (PR) receiving techniques. The intensity errors during measurement, including noise and distortions, are found to be a limiting factor for the precise convergence of the PR algorithm. To improve the PR reconstruction accuracy, we…
▽ More
We experimentally investigate transmitting high-order quadrature amplitude modulation (QAM) signals with carrierless and intensity-only measurements with phase retrieval (PR) receiving techniques. The intensity errors during measurement, including noise and distortions, are found to be a limiting factor for the precise convergence of the PR algorithm. To improve the PR reconstruction accuracy, we propose a distortion-aware PR scheme comprising both training and reconstruction stages. By estimating and emulating the distortion caused by various channel impairments, the proposed scheme enables enhanced agreement between the estimated and measured amplitudes throughout the PR iteration, thus resulting in improved reconstruction performance to support high-order QAM transmission. With the aid of proposed techniques, we experimentally demonstrate 50-GBaud 16QAM and 32QAM signals transmitting through a standard single-mode optical fiber (SSMF) span of 40 and 80 km, and achieve bit error rates (BERs) below the 6.25% hard decision (HD)-forward error correction (FEC) and 25% soft decision (SD)-FEC thresholds for the two modulation formats, respectively. By tuning the pilot symbol ratio and applying concatenated coding, we also demonstrate that a post-FEC data rate of up to 140 Gb/s can be achieved for both distances at an optimal pilot symbol ratio of 20%.
△ Less
Submitted 8 October, 2023;
originally announced October 2023.
-
Real-time Optical Network Sensing Control Plane Enabled by a Novel Sub us Response Time Fibre Sensing Control Device
Authors:
Mijail Szczerban,
Mikael Mazur,
Lauren Dallachiesa,
Haïk Mardoyan,
Sarvesh Bidkar,
Roland Ryf,
Jesse Simsarian
Abstract:
We propose and implement a novel fibre sensing control device and associated sensing control plane that effectively controls backscatter and polarization-based fibre sensing. We experimentally demonstrate in a fibre network that this device and associated control plane can achieve sub-us response time.
We propose and implement a novel fibre sensing control device and associated sensing control plane that effectively controls backscatter and polarization-based fibre sensing. We experimentally demonstrate in a fibre network that this device and associated control plane can achieve sub-us response time.
△ Less
Submitted 6 October, 2023;
originally announced October 2023.
-
Real-Time Monitoring of Cable Break in a Live Fiber Network using a Coherent Transceiver Prototype
Authors:
Mikael Mazur,
Lauren Dallachiesa,
Roland Ryf,
Dennis Wallberg,
Erik Börjesson,
Magnus Bergroth,
Börje Josefsson,
Nicolas K. Fontaine,
Haoshuo Chen,
David T. Neilson,
Jochen Schröder,
Per Larsson-Edefors,
Magnus Karlsson
Abstract:
We monitor a 524km live network link using an FPGA-based sensing-capable coherent transceiver prototype during a human-caused cable break. Post-analysis of polarization data reveals minute-level potential warning precursors and baseline-exceeding changes directly preceding the break.
We monitor a 524km live network link using an FPGA-based sensing-capable coherent transceiver prototype during a human-caused cable break. Post-analysis of polarization data reveals minute-level potential warning precursors and baseline-exceeding changes directly preceding the break.
△ Less
Submitted 3 July, 2023;
originally announced July 2023.
-
Digital Twin of a Network and Operating Environment Using Augmented Reality
Authors:
Haoshuo Chen,
Xiaonan Xu,
Jesse E. Simsarian,
Mijail Szczerban,
Rob Harby,
Roland Ryf,
Mikael Mazur,
Lauren Dallachiesa,
Nicolas K. Fontaine,
John Cloonan,
Jim Sandoz,
David T. Neilson
Abstract:
We demonstrate the digital twin of a network, network elements, and operating environment using machine learning. We achieve network card failure localization and remote collaboration over 86 km of fiber using augmented reality.
We demonstrate the digital twin of a network, network elements, and operating environment using machine learning. We achieve network card failure localization and remote collaboration over 86 km of fiber using augmented reality.
△ Less
Submitted 23 March, 2023;
originally announced March 2023.
-
Advanced Distributed Submarine Cable Monitoring and Environmental Sensing using Constant Power Probe Signals and Coherent Detection
Authors:
Mikael Mazur,
Nicolas K. Fontaine,
Megan Kelleher,
Valey Kamalov,
Roland Ryf,
Lauren Dallachiesa,
Haoshuo Chen,
David T. Neilson,
Franklyn Quinlan
Abstract:
In this work we demonstrate an FPGA-based coherent optical frequency domain reflectometry setup for cable monitoring. Using coherent detection for averaging and narrowband filtering, we significantly improve the signal-to-noise ratio (SNR) compared to traditional intensity-only techniques while also enabling continuous monitoring of phase and polarization. In addition, the probe signal has constan…
▽ More
In this work we demonstrate an FPGA-based coherent optical frequency domain reflectometry setup for cable monitoring. Using coherent detection for averaging and narrowband filtering, we significantly improve the signal-to-noise ratio (SNR) compared to traditional intensity-only techniques while also enabling continuous monitoring of phase and polarization. In addition, the probe signal has constant power, avoiding the nonlinear distortions and thereby enabling continuous use without interfering with data channels. We perform a field demonstration over a trans-oceanic cable using loopback configurations present in each repeater, demonstrating measurement SNR exceeding 30 dB for all about 80 repeaters with an averaging window of 1 second. We furthermore compare cable monitoring using coherent processing to today's solutions using power-only measurements. Our results show how transitioning to coherent technology for cable monitoring can improve sensitivity and enable new types of monitoring, exploring knowledge gained from transitioning from incoherent to coherent data transmission.
△ Less
Submitted 11 March, 2023;
originally announced March 2023.
-
Tensor network simulation of the quantum Kibble-Zurek quench from the Mott to superfluid phase in the two-dimensional Bose-Hubbard model
Authors:
Jacek Dziarmaga,
Jakub M. Mazur
Abstract:
Quantum simulations of the Bose-Hubbard model (BHM) at commensurate filling can follow spreading of correlations after a sudden quench for times long enough to estimate their propagation velocities. In this work we perform tensor network simulation of the quantum Kibble-Zurek (KZ) ramp from the Mott towards the superfluid phase in the square lattice BHM and demonstrate that even relatively short r…
▽ More
Quantum simulations of the Bose-Hubbard model (BHM) at commensurate filling can follow spreading of correlations after a sudden quench for times long enough to estimate their propagation velocities. In this work we perform tensor network simulation of the quantum Kibble-Zurek (KZ) ramp from the Mott towards the superfluid phase in the square lattice BHM and demonstrate that even relatively short ramp/quench times allow one to test the power laws predicted by the KZ mechanism (KZM). They can be verified for the correlation length and the excitation energy but the most reliable test is based on the KZM scaling hypothesis for the single particle correlation function: the correlation functions for different quench times evaluated at the same scaled time collapse to the same scaling function of the scaled distance. The scaling of the space and time variables is done according to the KZ power laws.
△ Less
Submitted 13 April, 2023; v1 submitted 26 February, 2023;
originally announced February 2023.
-
The Colibri Telescope Array for KBO Detection through Serendipitous Stellar Occultations: a Technical Description
Authors:
M. J. Mazur,
S. Metchev,
R. A. Brown,
R. Gupta,
R. Bloch,
T. Mills,
E. Pass
Abstract:
We present the technical design, construction and testing of the Colibri telescope array at Elginfield Observatory near London, Ontario, Canada. Three 50-cm telescopes are arranged in a triangular array and are separated by 110-160 metres. During operation, they will monitor field stars at the intersections of the ecliptic and galactic plane for serendipitous stellar occultations (SSOs) by trans-N…
▽ More
We present the technical design, construction and testing of the Colibri telescope array at Elginfield Observatory near London, Ontario, Canada. Three 50-cm telescopes are arranged in a triangular array and are separated by 110-160 metres. During operation, they will monitor field stars at the intersections of the ecliptic and galactic plane for serendipitous stellar occultations (SSOs) by trans-Neptunian objects (TNOs). At a frame rate of 40 frames per second (fps), Fresnel diffraction in the occultation light curve can be resolved and, with coincident detections, be used to estimate basic properties of the occulting object. Using off-the-shelf components, the Colibri system streams imagery to disk at a rate of 1.5 GB/s for next-day processing by a custom occultation detection pipeline.
The imaging system has been tested and is found to perform well, given the moderate site conditions. Limiting magnitudes at 40 fps are found to be about 12.1 (temporal SNR=5, visible light Gaia G band) with time-series standard deviations ranging from about 0.035 mag to >0.2 mag. SNR is observed to decrease linearly with magnitude for stars fainter than about G = 9.5 mag. Brighter than this limit, SNR is constant, suggesting that atmospheric scintillation is the dominant noise source. Astrometric solutions show errors typically less than approximately 0.3 pixels (0.8 arc seconds) without a need for high-order corrections.
△ Less
Submitted 11 October, 2022;
originally announced October 2022.
-
Alignment of Free-Space Coupling of Few-Mode Fibre to Multi-Mode Fibre using Digital Holography
Authors:
Menno van den Hout,
Sjoerd van der Heide,
Thomas Bradley,
Amado M. Velazquez-Benitez,
Nicolas K. Fontaine,
Roland Ryf,
Haoshuo Chen,
Mikael Mazur,
Jose Enrique Antonio-López,
Juan Carlos Alvarado-Zacarias,
Rodrigo Amezcua-Correa,
Marianne Bogot-Astruc Adrian Amezcua Correa,
Pierre Sillard,
Chigo Okonkwo
Abstract:
Off-axis digital holography is used to align a few-mode fiber to a multi-mode fiber in a free-space optical setup. Alignment based on power coupling measurements alone cannot guarantee low mode-dependent loss. The proposed alignment method enables reliable fiber coupling with low mode-dependent loss and crosstalk.
Off-axis digital holography is used to align a few-mode fiber to a multi-mode fiber in a free-space optical setup. Alignment based on power coupling measurements alone cannot guarantee low mode-dependent loss. The proposed alignment method enables reliable fiber coupling with low mode-dependent loss and crosstalk.
△ Less
Submitted 24 June, 2022;
originally announced August 2022.
-
Computing optical meteor flux using Global Meteor Network data
Authors:
Denis Vida,
Rhiannon C. Blaauw Erskine,
Peter G. Brown,
Jonathon Kambulow,
Margaret Campbell-Brown,
Michael J. Mazur
Abstract:
Meteor showers and their outbursts are the dominant source of meteoroid impact risk to spacecraft on short time scales. Meteor shower prediction models depend on historical observations to produce accurate forecasts. However, the current lack of quality and persistent world-wide monitoring at optical meteoroid sizes has left some recent major outbursts poorly observed. A novel method of computing…
▽ More
Meteor showers and their outbursts are the dominant source of meteoroid impact risk to spacecraft on short time scales. Meteor shower prediction models depend on historical observations to produce accurate forecasts. However, the current lack of quality and persistent world-wide monitoring at optical meteoroid sizes has left some recent major outbursts poorly observed. A novel method of computing meteor shower flux is developed and applied to Global Meteor Network data. The method is verified against previously published observations of the Perseids and the Geminids. The complete mathematical and algorithmic details of computing meteor shower fluxes from video observations are described. As an example application of our approach, the flux measurements of the 2021 Perseid outburst, the 2020-2022 Quadrantids, and 2020-2021 Geminids are presented. The flux of the 2021 Perseids reached similar levels to the 1991-1994 and 2016 outbursts (ZHR $\sim$ 280). The flux of the Quadrantids shows high year-to-year variability in the core of the stream while the longer lasting background activity is less variable, consistent with an age difference between the two components. The Geminids show a double peak in flux near the time of peak.
△ Less
Submitted 22 June, 2022;
originally announced June 2022.
-
Bounding Evidence and Estimating Log-Likelihood in VAE
Authors:
Łukasz Struski,
Marcin Mazur,
Paweł Batorski,
Przemysław Spurek,
Jacek Tabor
Abstract:
Many crucial problems in deep learning and statistics are caused by a variational gap, i.e., a difference between evidence and evidence lower bound (ELBO). As a consequence, in the classical VAE model, we obtain only the lower bound on the log-likelihood since ELBO is used as a cost function, and therefore we cannot compare log-likelihood between models. In this paper, we present a general and eff…
▽ More
Many crucial problems in deep learning and statistics are caused by a variational gap, i.e., a difference between evidence and evidence lower bound (ELBO). As a consequence, in the classical VAE model, we obtain only the lower bound on the log-likelihood since ELBO is used as a cost function, and therefore we cannot compare log-likelihood between models. In this paper, we present a general and effective upper bound of the variational gap, which allows us to efficiently estimate the true evidence. We provide an extensive theoretical study of the proposed approach. Moreover, we show that by applying our estimation, we can easily obtain lower and upper bounds for the log-likelihood of VAE models.
△ Less
Submitted 19 June, 2022;
originally announced June 2022.
-
Optical Field Characterization using Off-axis Digital Holography
Authors:
Sjoerd van der Heide,
Bram van Esch,
Menno van den Hout,
Thomas Bradley,
Amado M. Velazquez-Benitez,
Nicolas K. Fontaine,
Roland Ryf,
Haoshuo Chen,
Mikael Mazur,
Jose Enrique Antonio-López,
Juan Carlos Alvarado-Zacarias,
Rodrigo Amezcua-Correa,
Chigo Okonkwo
Abstract:
Angular resolved digital holography is presented as a technique for real-time characterization of the full optical field (amplitude and phase) of space-division multiplexing components and fibers, here a 6-mode photonic-lantern is characterized.
Angular resolved digital holography is presented as a technique for real-time characterization of the full optical field (amplitude and phase) of space-division multiplexing components and fibers, here a 6-mode photonic-lantern is characterized.
△ Less
Submitted 30 January, 2022;
originally announced February 2022.
-
Development of a Very Faint Meteor Detection System based on an EMCCD Sensor and Matched Filter Processing
Authors:
P. Gural,
T. Mills,
M. Mazur,
P. Brown
Abstract:
The mass ranges of meteors, imaged by electro-optical (EO) cameras and backscatter radar receivers, for the most part do not overlap. Typical EO systems detect meteoroid masses down to 10$^{-5}$ kg or roughly magnitude +2 meteors when using moderate field of view optics, un-intensified optical components, and meteor entry velocities around 45 km/sec. This is near the high end of the mass range of…
▽ More
The mass ranges of meteors, imaged by electro-optical (EO) cameras and backscatter radar receivers, for the most part do not overlap. Typical EO systems detect meteoroid masses down to 10$^{-5}$ kg or roughly magnitude +2 meteors when using moderate field of view optics, un-intensified optical components, and meteor entry velocities around 45 km/sec. This is near the high end of the mass range of typical meteor radar observations. Having the same mass meteor measured by different sensor wavelength bands would be a benefit in terms of calibrating mass estimations for both EO and radar. To that end, the University of Western Ontario (UWO) has acquired and deployed a very low light imaging system based on an electron-multiplying CCD camera technology. This embeds a very low noise, per pixel intensifier chip in a cooled camera setup with various options for frame rate, region of interest and binning. The EO system of optics and sensor was optimally configured to collect 32 frames per second in a square field of view 14.7 degrees on a side, achieving a single-frame stellar limiting magnitude of m$_G$ = +10.5. The system typically observes meteors of +6.5. A key development in this pipeline has been the first true application of matched filter processing to process the faintest meteors possible in the EMCCD system while also yielding high quality automated metric measurements of meteor focal plane positions. With pairs of EMCCD systems deployed at two sites, triangulation and high accuracy orbits are one of the many products being generated by this system. These measurements will be coupled to observations from the Canadian Meteor Orbit Radar (CMOR) used for meteor plasma characterization and the Canadian Automated Meteor Observatory (CAMO) high resolution mirror tracking system.
△ Less
Submitted 27 December, 2021;
originally announced December 2021.
-
Target Layer Regularization for Continual Learning Using Cramer-Wold Generator
Authors:
Marcin Mazur,
Łukasz Pustelnik,
Szymon Knop,
Patryk Pagacz,
Przemysław Spurek
Abstract:
We propose an effective regularization strategy (CW-TaLaR) for solving continual learning problems. It uses a penalizing term expressed by the Cramer-Wold distance between two probability distributions defined on a target layer of an underlying neural network that is shared by all tasks, and the simple architecture of the Cramer-Wold generator for modeling output data representation. Our strategy…
▽ More
We propose an effective regularization strategy (CW-TaLaR) for solving continual learning problems. It uses a penalizing term expressed by the Cramer-Wold distance between two probability distributions defined on a target layer of an underlying neural network that is shared by all tasks, and the simple architecture of the Cramer-Wold generator for modeling output data representation. Our strategy preserves target layer distribution while learning a new task but does not require remembering previous tasks' datasets. We perform experiments involving several common supervised frameworks, which prove the competitiveness of the CW-TaLaR method in comparison to a few existing state-of-the-art continual learning models.
△ Less
Submitted 15 November, 2021;
originally announced November 2021.
-
Numerical investigation of azimuthal thermoacoustic instability in a gas turbine model combustor
Authors:
Zhi X. Chen,
Nedunchezhian Swaminathan,
Marek Mazur,
Nicholas A. Worth,
Guangyu Zhang,
Lei Li
Abstract:
Self-excited spinning mode azimuthal instability in an annular combustor with non-swirling flow is investigated using large eddy simulation (LES). Compressible Navier-Stoke equations are solved with a flamelet combustion model to describe the subgrid chemistry$-$turbulence interactions. Two flamelet models, with and without heat loss effects, are compared to elucidate the non-adiabatic wall effect…
▽ More
Self-excited spinning mode azimuthal instability in an annular combustor with non-swirling flow is investigated using large eddy simulation (LES). Compressible Navier-Stoke equations are solved with a flamelet combustion model to describe the subgrid chemistry$-$turbulence interactions. Two flamelet models, with and without heat loss effects, are compared to elucidate the non-adiabatic wall effects on the thermoacoustic instability. The azimuthal modes are captured well by both models with only marginal differences in the computed frequencies and amplitudes. By comparing with the experimental measurements, the frequencies given by the LES are approximately 10\% higher and the amplitudes are well predicted. Further analysis of the experimental and LES data shows a similar dominant anti-clockwise spinning mode, under which a good agreement is observed for the phase-averaged heat release rate fluctuations. Dynamic mode decomposition (DMD) is applied to shed more light on this spinning mode. The LES and experimental DMD modes reconstructed for their azimuthal mode frequencies agree very well for the heat release fluctuations. The DMD mode structure for the acoustic pressure from the LES shows a considerable non-zero profile at the combustor outlet, which could be essential for azimuthal modes to establish in this annular combustor. Finally, a low-order modelling study was conducted using an acoustic network combined with the flame transfer function extracted from LES. The results show that the dominant mode is associated with the plenum showing a first longitudinal and azimuthal mixed mode structure. By tuning the plenum length to match the effective volume, the predicted frequency becomes very close to the measured value.
△ Less
Submitted 29 September, 2022; v1 submitted 1 November, 2021;
originally announced November 2021.
-
HyperCube: Implicit Field Representations of Voxelized 3D Models
Authors:
Magdalena Proszewska,
Marcin Mazur,
Tomasz Trzciński,
Przemysław Spurek
Abstract:
Recently introduced implicit field representations offer an effective way of generating 3D object shapes. They leverage implicit decoder trained to take a 3D point coordinate concatenated with a shape encoding and to output a value which indicates whether the point is outside the shape or not. Although this approach enables efficient rendering of visually plausible objects, it has two significant…
▽ More
Recently introduced implicit field representations offer an effective way of generating 3D object shapes. They leverage implicit decoder trained to take a 3D point coordinate concatenated with a shape encoding and to output a value which indicates whether the point is outside the shape or not. Although this approach enables efficient rendering of visually plausible objects, it has two significant limitations. First, it is based on a single neural network dedicated for all objects from a training set which results in a cumbersome training procedure and its application in real life. More importantly, the implicit decoder takes only points sampled within voxels (and not the entire voxels) which yields problems at the classification boundaries and results in empty spaces within the rendered mesh.
To solve the above limitations, we introduce a new HyperCube architecture based on interval arithmetic network, that enables direct processing of 3D voxels, trained using a hypernetwork paradigm to enforce model convergence. Instead of processing individual 3D samples from within a voxel, our approach allows to input the entire voxel (3D cube) represented with its convex hull coordinates, while the target network constructed by a hypernet assigns it to an inside or outside category. As a result our HyperCube model outperforms the competing approaches both in terms of training and inference efficiency, as well as the final mesh quality.
△ Less
Submitted 12 October, 2021;
originally announced October 2021.
-
Impulse Response Characterization of a Commercial Multimode Fiber using Superconducting Nanowire Single-Photon Detectors
Authors:
Yuanhang Zhang,
Nicolas K. Fontaine,
Mikael Mazur,
Haoshuo Chen,
Roland Ryf,
Guifang Li,
Andrea Blanco-Redondo
Abstract:
Time-of-flight measurements are key to study distributed mode coupling and differential mode group delay (DMDG) in multimode fibers (MMFs). However, current approaches using regular photodetectors with limited sensitivity preclude the detection of weak modal interactions in such fibers masking interesting physical effects. Here we demonstrate the use of high-sensitivity superconducting nanowire si…
▽ More
Time-of-flight measurements are key to study distributed mode coupling and differential mode group delay (DMDG) in multimode fibers (MMFs). However, current approaches using regular photodetectors with limited sensitivity preclude the detection of weak modal interactions in such fibers masking interesting physical effects. Here we demonstrate the use of high-sensitivity superconducting nanowire single-photon detectors (SNSPDs) to measure the mode transfer matrix of a commercial graded-index multimode fiber. Two high performance 45-mode multi-plane light conversion (MPLC) devices served as the mode multiplexer/demultiplexer. Distributed mode coupling and DMDG among different mode groups are accurately quantified from the impulse response measurement. We also observed cladding modes of the MMF as a pedestal of the pulse in the measurement. This work paves way for applications such as quantum communications using many spatial modes of the fiber.
△ Less
Submitted 4 December, 2021; v1 submitted 29 September, 2021;
originally announced September 2021.
-
Iron Rain: measuring the occurrence rate and origin of small iron meteoroids at Earth
Authors:
Tristan Mills,
P. G. Brown,
M. J. Mazur,
D. Vida,
Peter S. Gural,
Althea V. Moorhead
Abstract:
We report results of a four-year survey using Electron Multiplied Charged Coupled Device (EMCCD) cameras recording 34761 two-station video meteor events complete to a limiting magnitude of +6. The survey goal was to characterize probable iron meteoroids. Using only physical properties of the meteor trajectories including early peaking light curves, short luminous trajectories, and high energies ac…
▽ More
We report results of a four-year survey using Electron Multiplied Charged Coupled Device (EMCCD) cameras recording 34761 two-station video meteor events complete to a limiting magnitude of +6. The survey goal was to characterize probable iron meteoroids. Using only physical properties of the meteor trajectories including early peaking light curves, short luminous trajectories, and high energies accumulated per area at beginning, we identified 1068 iron meteors. Our iron candidates are most abundant at slow speeds < 15 km/s, where they make up approximately 20% of the mm-sized meteoroid population. They are overwhelmingly on asteroidal orbits, and have particularly low orbital eccentricities and smaller semi-major axes when compared to non-irons between 10-20 km/s. Our iron population appears to be more numerous at fainter magnitudes, comprising 15% of slow (10-15 km/s) meteors with peak brightness of +3 with the fraction rising to 25% at +6 to +7, our survey limit. The iron orbits are most consistent with an asteroidal source and are in highly evolved orbits, suggesting long collisional lifetimes (107 years). Metal-rich chondrules (nodules) found in abundance in EL Chondrites are one possible source for this population. We also propose a possible technique using R-band colours to more robustly identify fainter iron meteors with very high confidence.
△ Less
Submitted 21 September, 2021;
originally announced September 2021.
-
Transoceanic Phase and Polarization Fiber Sensing using Real-Time Coherent Transceiver
Authors:
Mikael Mazur,
Jorge C. Castellanos,
Roland Ryf,
Erik Borjeson,
Tracy Chodkiewicz,
Valey Kamalov,
Shuang Yin,
Nicolas K. Fontaine,
Haoshuo Chen,
Lauren Dallachiesa,
Steve Corteselli,
Philip Cop**,
Jurgen Gripp,
Aurelien Mortelette,
Benoit Kowalski,
Rodney Dellinger,
David T. Neilson,
Per Larsson-Edefors
Abstract:
We implement a real-time coherent transceiver with fast streaming outputs for environmental sensing. Continuous sensing using phase and equalizer outputs over 12800km of a submarine cable is demonstrated to enable time resolved spectroscopy in broad spectral range of 10mHz - 1kHz.
We implement a real-time coherent transceiver with fast streaming outputs for environmental sensing. Continuous sensing using phase and equalizer outputs over 12800km of a submarine cable is demonstrated to enable time resolved spectroscopy in broad spectral range of 10mHz - 1kHz.
△ Less
Submitted 14 September, 2021;
originally announced September 2021.
-
The Global Meteor Network -- Methodology and First Results
Authors:
Denis Vida,
Damir Šegon,
Peter S. Gural,
Peter G. Brown,
Mark J. M. McIntyre,
Tammo Jan Dijkema,
Lovro Pavletić,
Patrik Kukić,
Michael J. Mazur,
Peter Eschman,
Paul Roggemans,
Aleksandar Merlak,
Dario Zubović
Abstract:
The Global Meteor Network (GMN) utilizes highly sensitive low-cost CMOS video cameras which run open-source meteor detection software on Raspberry Pi computers. Currently, over 450 GMN cameras in 30 countries are deployed. The main goal of the network is to provide long-term characterization of the radiants, flux, and size distribution of annual meteor showers and outbursts in the optical meteor m…
▽ More
The Global Meteor Network (GMN) utilizes highly sensitive low-cost CMOS video cameras which run open-source meteor detection software on Raspberry Pi computers. Currently, over 450 GMN cameras in 30 countries are deployed. The main goal of the network is to provide long-term characterization of the radiants, flux, and size distribution of annual meteor showers and outbursts in the optical meteor mass range. The rapid 24-hour publication cycle the orbital data will enhance the public situational awareness of the near-Earth meteoroid environment. The GMN also aims to increase the number of instrumentally observed meteorite falls and the transparency of data reduction methods. A novel astrometry calibration method is presented which allows decoupling of the camera pointing from the distortion, and is used for frequent pointing calibrations through the night. Using wide-field cameras ($88^{\circ}\times48^{\circ}$) with a limiting stellar magnitude of $+6.0 \pm 0.5$ at 25 frames per second, over 220,000 precise meteoroid orbits were collected since December 2018 until June 2021. The median radiant precision of all computed trajectories is $0.47^{\circ}$, $0.32^{\circ}$ for $\sim20\%$ of meteors which were observed from 4+ stations, a precision sufficient to measure physical dispersions of meteor showers. All non-daytime annual established meteor showers were observed during that time, including five outbursts. An analysis of a meteorite-drop** fireball is presented which showed visible wake, fragmentation details, and several discernible fragments. It had spatial trajectory fit errors of only ~40 m, which translated into the estimated radiant and velocity errors of 3 arc minutes and tens of meters per second.
△ Less
Submitted 29 July, 2021; v1 submitted 26 July, 2021;
originally announced July 2021.
-
Power Efficient Communication for Low Signal to Noise Ratio Optical Links
Authors:
Ravikiran Kakarla,
Mikael Mazur,
Jochen Schröder,
Peter A. Andrekson
Abstract:
Receiver sensitivity is a particularly important metric in optical communication links operating at low signal-to-noise ratios (SNRs), for example in deep-space communication, since it directly limits the maximum achievable reach and data rate. Pulse position modulation (PPM) with direct detection photon-counting detectors are the most power-efficient solution known, however, the sensitivity gain…
▽ More
Receiver sensitivity is a particularly important metric in optical communication links operating at low signal-to-noise ratios (SNRs), for example in deep-space communication, since it directly limits the maximum achievable reach and data rate. Pulse position modulation (PPM) with direct detection photon-counting detectors are the most power-efficient solution known, however, the sensitivity gain comes at the expense of reduced spectral efficiency. We show that quadrature phase-shift keying (QPSK) modulation with a phase-sensitive ultralow noise pre-amplified coherent receiver outperforms other well-known power-efficient multi-dimensional coherent modulation formats, while simultaneously having higher spectral efficiency. It also results in better sensitivity than PPM for orders up to 64 with ideal direct detection using photon-counting receivers. This is because of the bit error rate characteristics favoring the QPSK format when forward error correction with a large overhead is considered.
△ Less
Submitted 20 April, 2021;
originally announced April 2021.
-
Digital Interference Mitigation in Space Division Multiplexing Self-Homodyne Coherent Detection
Authors:
Hanzi Huang,
Yetian Huang,
Haoshuo Chen,
Qianwu Zhang,
Jian Chen,
Nicolas K. Fontaine,
Mikael Mazur,
Roland Ryf,
Junho Cho,
Yingxiong Song
Abstract:
We propose a digital interference mitigation scheme to reduce the impact of mode coupling in space division multiplexing self-homodyne coherent detection and experimentally verify its effectiveness in 240-Gbps mode-multiplexed transmission over 3-mode multimode fiber.
We propose a digital interference mitigation scheme to reduce the impact of mode coupling in space division multiplexing self-homodyne coherent detection and experimentally verify its effectiveness in 240-Gbps mode-multiplexed transmission over 3-mode multimode fiber.
△ Less
Submitted 28 February, 2021;
originally announced March 2021.
-
Modeling 3D Surface Manifolds with a Locally Conditioned Atlas
Authors:
Przemysław Spurek,
Sebastian Winczowski,
Maciej Zięba,
Tomasz Trzciński,
Kacper Kania,
Marcin Mazur
Abstract:
Recently proposed 3D object reconstruction methods represent a mesh with an atlas - a set of planar patches approximating the surface. However, their application in a real-world scenario is limited since the surfaces of reconstructed objects contain discontinuities, which degrades the quality of the final mesh. This is mainly caused by independent processing of individual patches, and in this work…
▽ More
Recently proposed 3D object reconstruction methods represent a mesh with an atlas - a set of planar patches approximating the surface. However, their application in a real-world scenario is limited since the surfaces of reconstructed objects contain discontinuities, which degrades the quality of the final mesh. This is mainly caused by independent processing of individual patches, and in this work, we postulate to mitigate this limitation by preserving local consistency around patch vertices. To that end, we introduce a Locally Conditioned Atlas (LoCondA), a framework for representing a 3D object hierarchically in a generative model. Firstly, the model maps a point cloud of an object into a sphere. Secondly, by leveraging a spherical prior, we enforce the map** to be locally consistent on the sphere and on the target object. This way, we can sample a mesh quad on that sphere and project it back onto the object's manifold. With LoCondA, we can produce topologically diverse objects while maintaining quads to be stitched together. We show that the proposed approach provides structurally coherent reconstructions while producing meshes of quality comparable to the competitors.
△ Less
Submitted 5 April, 2024; v1 submitted 11 February, 2021;
originally announced February 2021.
-
HyperPocket: Generative Point Cloud Completion
Authors:
Przemysław Spurek,
Artur Kasymov,
Marcin Mazur,
Diana Janik,
Sławomir Tadeja,
Łukasz Struski,
Jacek Tabor,
Tomasz Trzciński
Abstract:
Scanning real-life scenes with modern registration devices typically give incomplete point cloud representations, mostly due to the limitations of the scanning process and 3D occlusions. Therefore, completing such partial representations remains a fundamental challenge of many computer vision applications. Most of the existing approaches aim to solve this problem by learning to reconstruct individ…
▽ More
Scanning real-life scenes with modern registration devices typically give incomplete point cloud representations, mostly due to the limitations of the scanning process and 3D occlusions. Therefore, completing such partial representations remains a fundamental challenge of many computer vision applications. Most of the existing approaches aim to solve this problem by learning to reconstruct individual 3D objects in a synthetic setup of an uncluttered environment, which is far from a real-life scenario. In this work, we reformulate the problem of point cloud completion into an object hallucination task. Thus, we introduce a novel autoencoder-based architecture called HyperPocket that disentangles latent representations and, as a result, enables the generation of multiple variants of the completed 3D point clouds. We split point cloud processing into two disjoint data streams and leverage a hypernetwork paradigm to fill the spaces, dubbed pockets, that are left by the missing object parts. As a result, the generated point clouds are not only smooth but also plausible and geometrically consistent with the scene. Our method offers competitive performances to the other state-of-the-art models, and it enables a~plethora of novel applications.
△ Less
Submitted 11 February, 2021;
originally announced February 2021.
-
Exploiting Angular Multiplexing for Polarization-diversity in Off-axis Digital Holography
Authors:
Sjoerd van der Heide,
Rutger van Anrooij,
Menno van den Hout,
Nicolas K. Fontaine,
Roland Ryf,
Haoshuo Chen,
Mikael Mazur,
Jose Enrique Antonio-Lopez,
Juan Carlos Alvarado-Zacarias,
Ton Koonen,
Rodrigo Amezcua-Correa,
Chigo Okonkwo
Abstract:
Digital holography measures the complex optical field and transfer matrix of a device, polarization-diversity is often achieved through spatial multiplexing. We introduce angular multiplexing, to increase flexibility in the optical setup. Comparatively, similar values for cross-talk and mode-dependent loss are measured for a photonic lantern.
Digital holography measures the complex optical field and transfer matrix of a device, polarization-diversity is often achieved through spatial multiplexing. We introduce angular multiplexing, to increase flexibility in the optical setup. Comparatively, similar values for cross-talk and mode-dependent loss are measured for a photonic lantern.
△ Less
Submitted 27 October, 2020;
originally announced October 2020.
-
Generative models with kernel distance in data space
Authors:
Szymon Knop,
Marcin Mazur,
Przemysław Spurek,
Jacek Tabor,
Igor Podolak
Abstract:
Generative models dealing with modeling a~joint data distribution are generally either autoencoder or GAN based. Both have their pros and cons, generating blurry images or being unstable in training or prone to mode collapse phenomenon, respectively. The objective of this paper is to construct a~model situated between above architectures, one that does not inherit their main weaknesses. The propos…
▽ More
Generative models dealing with modeling a~joint data distribution are generally either autoencoder or GAN based. Both have their pros and cons, generating blurry images or being unstable in training or prone to mode collapse phenomenon, respectively. The objective of this paper is to construct a~model situated between above architectures, one that does not inherit their main weaknesses. The proposed LCW generator (Latent Cramer-Wold generator) resembles a classical GAN in transforming Gaussian noise into data space. What is of utmost importance, instead of a~discriminator, LCW generator uses kernel distance. No adversarial training is utilized, hence the name generator. It is trained in two phases. First, an autoencoder based architecture, using kernel measures, is built to model a manifold of data. We propose a Latent Trick map** a Gaussian to latent in order to get the final model. This results in very competitive FID values.
△ Less
Submitted 15 September, 2020;
originally announced September 2020.
-
Gravilon: Applications of a New Gradient Descent Method to Machine Learning
Authors:
Chad Kelterborn,
Marcin Mazur,
Bogdan V. Petrenko
Abstract:
Gradient descent algorithms have been used in countless applications since the inception of Newton's method. The explosion in the number of applications of neural networks has re-energized efforts in recent years to improve the standard gradient descent method in both efficiency and accuracy. These methods modify the effect of the gradient in updating the values of the parameters. These modificati…
▽ More
Gradient descent algorithms have been used in countless applications since the inception of Newton's method. The explosion in the number of applications of neural networks has re-energized efforts in recent years to improve the standard gradient descent method in both efficiency and accuracy. These methods modify the effect of the gradient in updating the values of the parameters. These modifications often incorporate hyperparameters: additional variables whose values must be specified at the outset of the program. We provide, below, a novel gradient descent algorithm, called Gravilon, that uses the geometry of the hypersurface to modify the length of the step in the direction of the gradient. Using neural networks, we provide promising experimental results comparing the accuracy and efficiency of the Gravilon method against commonly used gradient descent algorithms on MNIST digit classification.
△ Less
Submitted 28 October, 2020; v1 submitted 26 August, 2020;
originally announced August 2020.
-
Precision measurements of radar transverse scattering speeds from meteor phase characteristics
Authors:
Michael Mazur,
Petr Pokorny,
Peter Brown,
Robert J. Weryk,
Denis Vida,
Carsten Schult,
Gunter Stober,
Anamika Agrawal
Abstract:
We describe an improved technique for using the backscattered phase from meteor radar echo measurements just prior to the specular point ($t_{0}$) to calculate meteor speeds and their uncertainty. Our method, which builds on earlier work of Cervera et al (1997), scans possible speeds in the Fresnel distance - time domain with a dynamic, sliding window and derives a best-speed estimate from the res…
▽ More
We describe an improved technique for using the backscattered phase from meteor radar echo measurements just prior to the specular point ($t_{0}$) to calculate meteor speeds and their uncertainty. Our method, which builds on earlier work of Cervera et al (1997), scans possible speeds in the Fresnel distance - time domain with a dynamic, sliding window and derives a best-speed estimate from the resultant speed distribution. We test the performance of our method, called pre-$t_{0}$ speeds by sliding-slopes technique (PSSST), on transverse scattered meteor echoes observed by the Middle Atmosphere Alomar Radar System (MAARSY) and the Canadian Meteor Orbit Radar (CMOR), and compare the results to time-of-flight and Fresnel transform speed estimates. Our novel technique is shown to produce good results when compared to both model and speed measurements using other techniques. We show that our speed precision is $\pm$5$\%$ at speeds less than 40 km/s and we find that more than 90$\%$ of all CMOR multi-station echoes have PSSST solutions. For CMOR data, PSSST is robust against the selection of critical phase value and poor phase unwrap**. Pick errors of up to $\pm$6 pulses for meteor speeds less than about 50 km/s produce errors of less than $\pm$5$\%$ of the meteoroid speed. In addition, the width of the PSSST speed Kernel density estimate (KDE) is used as a natural measure of uncertainty that captures both noise and $t_0$ pick uncertainties.
△ Less
Submitted 25 June, 2020;
originally announced June 2020.
-
A new method for measuring the meteor mass index: application to the 2018 Draconid meteor shower outburst
Authors:
Denis Vida,
Margaret Campbell-Brown,
Peter G. Brown,
Auriane Egal,
Michael J. Mazur
Abstract:
Context. Several authors predicted an outburst of the Draconid meteor shower in 2018, but with an uncertain level of activity. Aims. Optical meteor observations were used to derive the population and mass indices, flux, and radiant positions of Draconid meteors. Methods. 90 minutes of multi-station observations after the predicted peak of activity were performed using highly sensitive Electron Mul…
▽ More
Context. Several authors predicted an outburst of the Draconid meteor shower in 2018, but with an uncertain level of activity. Aims. Optical meteor observations were used to derive the population and mass indices, flux, and radiant positions of Draconid meteors. Methods. 90 minutes of multi-station observations after the predicted peak of activity were performed using highly sensitive Electron Multiplying Charge Coupled Device (EMCCD) cameras. The data calibration is discussed in detail. A novel maximum likelihood estimation method of computing the population and mass index with robust error estimation was developed. We apply the method to observed Draconids and use the values to derive the flux. Meteor trajectories are computed and compared to predicted radiant positions from meteoroid ejection models. Results. We found that the mass index was $1.74 \pm 0.18$ in the 30 minute bin after the predicted peak, and $2.32 \pm 0.27$ in the next 60 minutes. The location and the dispersion of the radiant matches well to modeled values, but there is an offset of $0.4^{\circ}$ in solar longitude.
△ Less
Submitted 10 February, 2020;
originally announced February 2020.
-
On the Performance under Hard and Soft Bitwise Mismatched-Decoding
Authors:
Tsuyoshi Yoshida,
Mikael Mazur,
Jochen Schröder,
Magnus Karlsson,
Erik Agrell
Abstract:
We investigated a suitable auxiliary channel setting and the gap between Q-factors with hard and soft demap**. The system margin definition should be reconsidered for systems employing complex coded modulation with soft forward error correction.
We investigated a suitable auxiliary channel setting and the gap between Q-factors with hard and soft demap**. The system margin definition should be reconsidered for systems employing complex coded modulation with soft forward error correction.
△ Less
Submitted 3 February, 2020;
originally announced February 2020.
-
Performance Monitoring for Live Systems with Soft FEC and Multilevel Modulation
Authors:
Tsuyoshi Yoshida,
Mikael Mazur,
Jochen Schröder,
Magnus Karlsson,
Erik Agrell
Abstract:
Performance monitoring is an essential function for margin measurements in live systems. Historically, system budgets have been described by the Q-factor converted from the bit error rate (BER) under binary modulation and direct detection. The introduction of hard-decision forward error correction (FEC) did not change this. In recent years technologies have changed significantly to comprise cohere…
▽ More
Performance monitoring is an essential function for margin measurements in live systems. Historically, system budgets have been described by the Q-factor converted from the bit error rate (BER) under binary modulation and direct detection. The introduction of hard-decision forward error correction (FEC) did not change this. In recent years technologies have changed significantly to comprise coherent detection, multilevel modulation and soft FEC. In such advanced systems, different metrics such as (nomalized) generalized mutual information (GMI/NGMI) and asymmetric information (ASI) are regarded as being more reliable. On the other hand, Q budgets are still useful because pre-FEC BER monitoring is established in industry for live system monitoring.
The pre-FEC BER is easily estimated from available information of the number of flipped bits in the FEC decoding, which does not require knowledge of the transmitted bits that are unknown in live systems. Therefore, the use of metrics like GMI/NGMI/ASI for performance monitoring has not been possible in live systems. However, in this work we propose a blind soft-performance estimation method. Based on a histogram of log-likelihood-values without the knowledge of the transmitted bits, we show how the ASI can be estimated.
We examined the proposed method experimentally for 16 and 64-ary quadrature amplitude modulation (QAM) and probabilistically shaped 16, 64, and 256-QAM in recirculating loop experiments. We see a relative error of 3.6%, which corresponds to around 0.5 dB signal-to-noise ratio difference for binary modulation, in the regime where the ASI is larger than the assumed FEC threshold. For this proposed method, the digital signal processing circuitry requires only a minimal additional function of storing the L-value histograms before the soft-decision FEC decoder.
△ Less
Submitted 17 February, 2020; v1 submitted 19 November, 2019;
originally announced November 2019.
-
Joint Superchannel Digital Signal Processing for Ultimate Bandwidth Utilization
Authors:
Mikael Mazur,
Jochen Schröder,
Magnus Karlsson,
Peter A. Andrekson
Abstract:
Modern optical communication systems transmit multiple frequency channels, each operating very close to its theoretical limit. The total bandwidth can reach 10THz limited by the optical amplifiers. Maximizing spectral efficiency, the throughput per bandwidth is thus crucial. Replacing independent lasers with an optical frequency comb can enable very dense packing by overcoming relative drifts. How…
▽ More
Modern optical communication systems transmit multiple frequency channels, each operating very close to its theoretical limit. The total bandwidth can reach 10THz limited by the optical amplifiers. Maximizing spectral efficiency, the throughput per bandwidth is thus crucial. Replacing independent lasers with an optical frequency comb can enable very dense packing by overcoming relative drifts. However, to date, interference from non-ideal spectral sha** prevents exploiting the full potential of frequency combs. Here, we demonstrate comb-enabled multi-channel digital signal processing, which overcomes these limitations. Each channel is detected using an independent coherent receiver and processed at two samples-per-symbol. By accounting for the unique comb stability and exploiting aliasing in the design of the dynamic equalizer, we show that the optimal spectral shape changes, resulting in a higher signal to noise ratio that pushes the optimal symbol rate towards and even \emph{above} the channel spacing, resulting in the first example of frequency-domain super-Nyquist transmission with multi-channel detection for optical systems. The scheme is verified both in back-to-back configuration and in single span transmission of a 21 channel superchannel originating from a 25GHz-spaced frequency comb. By jointly processing 3 wavelength channels at a time, we achieve spectral efficiency beyond what is possible with independent channels. At the same time, one significantly relaxes the hardware requirements on digital-to-analog resolution and bandwidth, and well as filter tap numbers. Our results show that comb-enabled multi-channel processing can overcome the limitations of classical dense wavelength division multiplexing systems by enabling tighter spacing to reach the ultimate spectral efficiency in optical communications.
△ Less
Submitted 8 November, 2019; v1 submitted 6 November, 2019;
originally announced November 2019.
-
The Hamburg Meteorite Fall: Fireball trajectory, orbit and dynamics
Authors:
P. G. Brown,
D. Vida,
D. E. Moser,
M. Granvik,
W. J. Koshak,
D. Chu,
J. Steckloff,
A. Licata,
S. Hariri,
J. Mason,
M. Mazur,
W. Cooke,
Z. Krzeminski
Abstract:
The Hamburg (H4) meteorite fell on January 17, 2018 at 01:08 UT approximately 10km North of Ann Arbor, Michigan. More than two dozen fragments totaling under one kilogram were recovered, primarily from frozen lake surfaces. The fireball initial velocity was 15.83 $\pm$ 0.05 km/s, based on four independent records showing the fireball above 50 km altitude. The radiant had a zenith angle of 66.1…
▽ More
The Hamburg (H4) meteorite fell on January 17, 2018 at 01:08 UT approximately 10km North of Ann Arbor, Michigan. More than two dozen fragments totaling under one kilogram were recovered, primarily from frozen lake surfaces. The fireball initial velocity was 15.83 $\pm$ 0.05 km/s, based on four independent records showing the fireball above 50 km altitude. The radiant had a zenith angle of 66.1 $\pm$ 0.29 degs and an azimuth of 121.56 $\pm$ 1.2 degs. The resulting low inclination ($<$ 1 deg) Apollo-type orbit has a large aphelion distance and Tisserand value relative to Jupiter (Tj) of $\sim$ 3. Two major flares dominant the energy deposition profile, centred at 24.1 and 21.7 km altitude respectively under dynamic pressures of 5-7 MPa. Our preferred total energy for the Hamburg fireball is 2 to 7 T TNT (8.4 to 28 x 10$^9$ J), which corresponds to a likely initial mass in the range of 60 to 225 kg or diameter between 0.3 to 0.5 m. Based on the model of Granvik et al (2018), the meteorite originated in an escape route from the mid-outer asteroid belt. Hamburg is the 14th known H-chondrite with an instrumentally-derived pre-atmospheric orbit, half of which have small ($<$5 deg) inclinations making connection with (6) Hebe problematic. A definitive parent body consistent with all 14 known H-chondrite orbits remains elusive
△ Less
Submitted 5 July, 2019;
originally announced July 2019.
-
Multi-wavelength arbitrary waveform generation through spectro-temporal unitary transformations
Authors:
Mikael Mazur,
Nicolas K. Fontaine,
Haoshuo Chen,
Roland Ryf,
David T. Neilson,
Gregory Raybon,
Andrew Adamiecki,
Steve Corteselli,
Jochen Schröder
Abstract:
Temporal waveform manipulation is a fundamental functionality in optics and crucial for applications like optical communications, microwave photonics and quantum optics. Traditional IQ- or phase-amplitude modulators shape light by carving energy from the input lightwave and are thus fundamentally lossy, and cannot apply independent modulation to multiple input wavelengths simultaneously. Taking in…
▽ More
Temporal waveform manipulation is a fundamental functionality in optics and crucial for applications like optical communications, microwave photonics and quantum optics. Traditional IQ- or phase-amplitude modulators shape light by carving energy from the input lightwave and are thus fundamentally lossy, and cannot apply independent modulation to multiple input wavelengths simultaneously. Taking inspiration from the space-time duality, we produce arbitrary unitary spectro-temporal transformations on multiple temporal input vectors with a modulation structure comprising of only lossless phase modulation and dispersive allpass filtering. The bandwidth of the output waveforms is not restricted by the driving electronics and independent transformations can be performed simultaneously on multiple orthogonal inputs such as spectrally separated frequency tones. This overcomes the main limitations of traditional electro-optic modulators and offers fundamental new insight into temporal wave manipulation.
△ Less
Submitted 12 December, 2019; v1 submitted 2 July, 2019;
originally announced July 2019.
-
Phase-coherent lightwave communications with frequency combs
Authors:
Lars Lundberg,
Mikael Mazur,
Ali Mirani,
Benjamin Foo,
Jochen Schröder,
Victor Torres-Company,
Magnus Karlsson,
Peter A. Andrekson
Abstract:
Fiber-optical networks are a crucial telecommunication infrastructure in society. Wavelength division multiplexing allows for transmitting parallel data streams over the fiber bandwidth, and coherent detection enables the use of sophisticated modulation formats and electronic compensation of signal impairments. In the future, optical frequency combs may replace multiple lasers used for the differe…
▽ More
Fiber-optical networks are a crucial telecommunication infrastructure in society. Wavelength division multiplexing allows for transmitting parallel data streams over the fiber bandwidth, and coherent detection enables the use of sophisticated modulation formats and electronic compensation of signal impairments. In the future, optical frequency combs may replace multiple lasers used for the different wavelength channels. We demonstrate two novel signal processing schemes that take advantage of the broadband phase coherence of optical frequency combs. This approach allows for a more efficient estimation and compensation of optical phase noise in coherent communication systems, which can significantly simplify the signal processing or increase the transmission performance. With further advances in space division multiplexing and chip-scale frequency comb sources, these findings pave the way for compact energy-efficient optical transceivers.
△ Less
Submitted 13 May, 2019;
originally announced May 2019.
-
Some properties of coefficients of cyclotomic polynomials
Authors:
Marcin Mazur,
Bogdan V. Petrenko
Abstract:
This paper investigates coefficients of cyclotomic polynomials theoretically and experimentally. We prove the following result. {{\em If $n=p_1\ldots p_k$ where $p_i$ are odd primes and
$p_1<p_2<\ldots<p_r<p_1+p_2<p_{r+1}<\ldots<p_t$ with $t\geq 3$ odd,
then the numbers $-(r-2),-(r-3),\ldots, r-2, r-1$ are all coefficients
of the cyclotomic polynomial $Φ_{2n}$. Furthermore, if…
▽ More
This paper investigates coefficients of cyclotomic polynomials theoretically and experimentally. We prove the following result. {{\em If $n=p_1\ldots p_k$ where $p_i$ are odd primes and
$p_1<p_2<\ldots<p_r<p_1+p_2<p_{r+1}<\ldots<p_t$ with $t\geq 3$ odd,
then the numbers $-(r-2),-(r-3),\ldots, r-2, r-1$ are all coefficients
of the cyclotomic polynomial $Φ_{2n}$. Furthermore, if $1+p_r<p_1+p_2$ then $1-r$ is also a coefficient of $Φ_{2n}$.} In the experimental part, in two instances we present computational evidence for asymptotic symmetry between distribution of positive and negative coefficients, and state the resulting conjectures.}
△ Less
Submitted 12 February, 2019;
originally announced February 2019.
-
Sliced generative models
Authors:
Szymon Knop,
Marcin Mazur,
Jacek Tabor,
Igor Podolak,
Przemysław Spurek
Abstract:
In this paper we discuss a class of AutoEncoder based generative models based on one dimensional sliced approach. The idea is based on the reduction of the discrimination between samples to one-dimensional case. Our experiments show that methods can be divided into two groups. First consists of methods which are a modification of standard normality tests, while the second is based on classical dis…
▽ More
In this paper we discuss a class of AutoEncoder based generative models based on one dimensional sliced approach. The idea is based on the reduction of the discrimination between samples to one-dimensional case. Our experiments show that methods can be divided into two groups. First consists of methods which are a modification of standard normality tests, while the second is based on classical distances between samples. It turns out that both groups are correct generative models, but the second one gives a slightly faster decrease rate of Fréchet Inception Distance (FID).
△ Less
Submitted 29 January, 2019;
originally announced January 2019.
-
Enabling high spectral efficiency coherent superchannel transmission with soliton microcombs
Authors:
Mikael Mazur,
Myoung-Gyun Suh,
Attila Fülöp,
Jochen Schröder,
Victor Torres-Company,
Magnus Karlsson,
Kerry J. Vahala,
Peter A. Andrekson
Abstract:
Optical communication systems have come through five orders of magnitude improvement in data rate over the last three decades. The increased demand in data traffic and the limited optoelectronic component bandwidths have led to state-of-the-art systems employing hundreds of separate lasers in each transmitter. Given the limited optical amplifier bandwidths, focus is now shifting to maximize the sp…
▽ More
Optical communication systems have come through five orders of magnitude improvement in data rate over the last three decades. The increased demand in data traffic and the limited optoelectronic component bandwidths have led to state-of-the-art systems employing hundreds of separate lasers in each transmitter. Given the limited optical amplifier bandwidths, focus is now shifting to maximize the spectral efficiency, SE. However, the frequency jitter from neighbouring lasers results in uncertainties of the exact channel wavelength, requiring large guardbands to avoid catastrophic channel overlap. Optical frequency combs with optimal line spacings (typically around 10-50 GHz) can overcome these limitations and maximize the SE. Recent developments in microresonator-based soliton frequency combs (hereafter microcombs) promise a compact, power efficient multi-wavelength and phase-locked light source for optical communications. Here we demonstrate a microcomb-based communication link achieving state-of-the-art spectral efficiency that has previously only been possible with bulk-optics systems. Compared to previous microcomb works in optical communications, our microcomb features a narrow line spacing of 22.1 GHz. In addition, it provides a four order-of-magnitude more stable line spacing compared to free-running lasers. The optical signal-to-noise ratio (OSNR) is sufficient for information encoding using state-of-the-art high-order modulation formats. This enables us to demonstrate transmission of a 12 Tb/s superchannel over distances ranging from a single 82 km span with an SE exceeding 10 bits/s/Hz, to 2000 km with an SE higher than 6 bits/s/Hz. These results demonstrate that microcombs can attain the SE that will spearhead future optical networks.
△ Less
Submitted 22 December, 2018;
originally announced December 2018.
-
Cramer-Wold AutoEncoder
Authors:
Szymon Knop,
Jacek Tabor,
Przemysław Spurek,
Igor Podolak,
Marcin Mazur,
Stanisław Jastrzębski
Abstract:
We propose a new generative model, Cramer-Wold Autoencoder (CWAE). Following WAE, we directly encourage normality of the latent space. Our paper uses also the recent idea from Sliced WAE (SWAE) model, which uses one-dimensional projections as a method of verifying closeness of two distributions. The crucial new ingredient is the introduction of a new (Cramer-Wold) metric in the space of densities,…
▽ More
We propose a new generative model, Cramer-Wold Autoencoder (CWAE). Following WAE, we directly encourage normality of the latent space. Our paper uses also the recent idea from Sliced WAE (SWAE) model, which uses one-dimensional projections as a method of verifying closeness of two distributions. The crucial new ingredient is the introduction of a new (Cramer-Wold) metric in the space of densities, which replaces the Wasserstein metric used in SWAE. We show that the Cramer-Wold metric between Gaussian mixtures is given by a simple analytic formula, which results in the removal of sampling necessary to estimate the cost function in WAE and SWAE models. As a consequence, while drastically simplifying the optimization procedure, CWAE produces samples of a matching perceptual quality to other SOTA models.
△ Less
Submitted 2 July, 2019; v1 submitted 23 May, 2018;
originally announced May 2018.
-
High-order coherent communications using mode-locked dark-pulse Kerr combs from microresonators
Authors:
Attila Fülöp,
Mikael Mazur,
Abel Lorences-Riesgo,
Pei-Hsun Wang,
Yi Xuan,
Dan. E. Leaird,
Minghao Qi,
Peter A. Andrekson,
Andrew M. Weiner,
Victor Torres-Company
Abstract:
Microresonator frequency combs harness the nonlinear Kerr effect in an integrated optical cavity to generate a multitude of phase-locked frequency lines. The line spacing can reach values in the order of 100 GHz, making it an attractive multi-wavelength light source for applications in fiber-optic communications. Depending on the dispersion of the microresonator, different physical dynamics have b…
▽ More
Microresonator frequency combs harness the nonlinear Kerr effect in an integrated optical cavity to generate a multitude of phase-locked frequency lines. The line spacing can reach values in the order of 100 GHz, making it an attractive multi-wavelength light source for applications in fiber-optic communications. Depending on the dispersion of the microresonator, different physical dynamics have been observed. A recently discovered comb state corresponds to the formation of mode-locked dark pulses in a normal-dispersion microcavity. Such dark-pulse combs are particularly compelling for advanced coherent communications since they display unusually high power conversion efficiency. Here, we report the first coherent transmission experiments using 64-quadrature amplitude modulation encoded onto the frequency lines of a dark-pulse comb. The high conversion efficiency of the comb enables transmitted optical signal-to-noise ratios above 33 dB while maintaining a laser pump power level compatible with state-of-the-art hybrid silicon lasers.
△ Less
Submitted 10 January, 2018;
originally announced January 2018.
-
Long-haul coherent communications using microresonator-based frequency combs
Authors:
Attila Fülöp,
Mikael Mazur,
Abel Lorences-Riesgo,
Tobias A. Eriksson,
Pei-Hsun Wang,
Yi Xuan,
Dan E. Leaird,
Minghao Qi,
Peter A. Andrekson,
Andrew M. Weiner,
Victor Torres-Company
Abstract:
Microresonator-based frequency combs are strong contenders as light sources for wavelength-division multiplexing (WDM). Recent demonstrations have shown the potential of microresonator combs for replacing tens of WDM lasers with a single laser-pumped device. These experiments relied on microresonators displaying anomalous dispersion. Devices operating in the normal dispersion offer the prospect of…
▽ More
Microresonator-based frequency combs are strong contenders as light sources for wavelength-division multiplexing (WDM). Recent demonstrations have shown the potential of microresonator combs for replacing tens of WDM lasers with a single laser-pumped device. These experiments relied on microresonators displaying anomalous dispersion. Devices operating in the normal dispersion offer the prospect of attaining high power conversion efficiency - an aspect that will be crucial in the future for enabling energy-efficient coherent communications with higher order modulation formats or lighting several spatial channels in space-division multiplexing. Here we report the experimental demonstration of coherent communications using normal dispersion microresonator combs. With polarization multiplexed (PM) quadrature phase-shift keying, we transmitted data over more than 6300 km in single-mode fiber. In a second experiment, we reached beyond 700 km with PM 16 quadrature amplitude modulation format and an aggregate data rate above 900 Gbit/s assuming 6% error correction overhead. These results represent the longest fiber transmission ever achieved using an integrated comb source.
△ Less
Submitted 30 January, 2017;
originally announced January 2017.
-
Generators of maximal orders
Authors:
Rostyslav V. Kravchenko,
Marcin Mazur,
Bogdan V. Petrenko
Abstract:
Let R be the ring of algebraic integers in a number field K and let L be a maximal order in a semisimple K-algebra B. Building on our previous work, we compute the smallest number of algebra generators of L considered as an R-algebra. This reproves and vastly extends the results of P.A.B. Pleasants, who considered the case when B is a number field. In order to achieve our goal, we obtain several r…
▽ More
Let R be the ring of algebraic integers in a number field K and let L be a maximal order in a semisimple K-algebra B. Building on our previous work, we compute the smallest number of algebra generators of L considered as an R-algebra. This reproves and vastly extends the results of P.A.B. Pleasants, who considered the case when B is a number field. In order to achieve our goal, we obtain several results about counting generators of algebras which have finitely many elements. These results should be of independent interest.
△ Less
Submitted 25 June, 2014;
originally announced June 2014.
-
The Physics of the B Factories
Authors:
A. J. Bevan,
B. Golob,
Th. Mannel,
S. Prell,
B. D. Yabsley,
K. Abe,
H. Aihara,
F. Anulli,
N. Arnaud,
T. Aushev,
M. Beneke,
J. Beringer,
F. Bianchi,
I. I. Bigi,
M. Bona,
N. Brambilla,
J. B rodzicka,
P. Chang,
M. J. Charles,
C. H. Cheng,
H. -Y. Cheng,
R. Chistov,
P. Colangelo,
J. P. Coleman,
A. Drutskoy
, et al. (2009 additional authors not shown)
Abstract:
This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C.
Please note that version 3 on the archive is the auxiliary…
▽ More
This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C.
Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026.
△ Less
Submitted 31 October, 2015; v1 submitted 24 June, 2014;
originally announced June 2014.
-
Lessons Learned from Development of a Software Tool to Support Academic Advising
Authors:
Nicholas Mattei,
Thomas Dodson,
Joshua T. Guerin,
Judy Goldsmith,
Joan M. Mazur
Abstract:
We detail some lessons learned while designing and testing a decision-theoretic advising support tool for undergraduates at a large state university. Between 2009 and 2011 we conducted two surveys of over 500 students in multiple majors and colleges. These surveys asked students detailed questions about their preferences concerning course selection, advising, and career paths. We present data from…
▽ More
We detail some lessons learned while designing and testing a decision-theoretic advising support tool for undergraduates at a large state university. Between 2009 and 2011 we conducted two surveys of over 500 students in multiple majors and colleges. These surveys asked students detailed questions about their preferences concerning course selection, advising, and career paths. We present data from this study which may be helpful for faculty and staff who advise undergraduate students. We find that advising support software tools can augment the student-advisor relationship, particularly in terms of course planning, but cannot and should not replace in-person advising.
△ Less
Submitted 29 May, 2014; v1 submitted 15 December, 2013;
originally announced December 2013.
-
Telescope Fabra ROA Montsec: a new robotic wide-field Baker-Nunn facility
Authors:
O. Fors,
J. Núñez,
J. L. Muiños,
F. J. Montojo,
R. Baena-Gallé,
J. Boloix,
R. Morcillo,
M. T. Merino,
E. C. Downey,
M. J. Mazur
Abstract:
A Baker-Nunn Camera (BNC), originally installed at the Real Instituto y Observatorio de la Armada (ROA) in 1958, was refurbished and robotized. The new facility, called Telescope Fabra ROA Montsec (TFRM), was installed at the Observatori Astronòmic del Montsec (OAdM).
The process of refurbishment is described in detail. Most of the steps of the refurbishment project were accomplished by purchasi…
▽ More
A Baker-Nunn Camera (BNC), originally installed at the Real Instituto y Observatorio de la Armada (ROA) in 1958, was refurbished and robotized. The new facility, called Telescope Fabra ROA Montsec (TFRM), was installed at the Observatori Astronòmic del Montsec (OAdM).
The process of refurbishment is described in detail. Most of the steps of the refurbishment project were accomplished by purchasing commercial components, which involve little posterior engineering assembling work. The TFRM is a 0.5m aperture f/0.96 optically modified BNC, which offers a unique combination of instrumental specifications: fully robotic and remote operation, wide-field of view (4.4 deg x 4.4 deg), moderate limiting magnitude (V~19.5mag), ability of tracking at arbitrary right ascension and declination rates, as well as opening and closing CCD shutter at will during an exposure.
Nearly all kind of image survey programs can benefit from those specifications. Apart from other less time consuming programs, since the beginning of science TFRM operations we have been conducting two specific and distinct surveys: super-Earths transiting around M-type dwarfs stars, and geostationary debris in the context of Space Situational Awareness / Space Surveillance and Tracking (SSA/SST) programs. Preliminary results for both cases will be shown.
△ Less
Submitted 9 April, 2013; v1 submitted 23 November, 2012;
originally announced November 2012.