Showing 1–50 of 58 results for author: Mazin, B A

MKIDGen3: Energy-Resolving, Single-Photon-Counting MKID Readout on an RFSoC

Authors: Jennifer Pearl Smith, John I. Bailey, III., Aled Cuda, Nicholas Zobrist, Benjamin A. Mazin

Abstract: Building large, cryogenic MKID arrays requires processing highly-multiplexed, wideband readout signals in real time; a task that has previously required large, heavy, and power-intensive custom electronics. In this work, we present the third-generation UVOIR MKID readout system (Gen3) which is capable of reading out twice as many detectors with a fifth the weight and power and an order of magnitud… ▽ More Building large, cryogenic MKID arrays requires processing highly-multiplexed, wideband readout signals in real time; a task that has previously required large, heavy, and power-intensive custom electronics. In this work, we present the third-generation UVOIR MKID readout system (Gen3) which is capable of reading out twice as many detectors with a fifth the weight and power and an order of magnitude less volume and cost-per-pixel as compared to the previous system. Gen3 leverages the Xilinx RFSoC4x2 platform to read out 2048, 1 MHz MKID channels per board. The system takes a modern approach to FPGA design using Vitis High-Level Synthesis (HLS) to specify signal processing blocks in C/C++, Vivado ML Intelligent Design Runs (IDR) to inform implementation stragety and close timing, and Python Productivity for ZYNQ (PYNQ) to simplify interacting with and programming the FPGA using Python. This design suite and tool flow allows general users to contribute to and maintain the design and positions Gen3 to rapidly migrate to future platforms as they become available. In this work, we describe the system requirements, design, and implementation. We also provide performance characterization details and show that the system achieves detector-limited resolving power in the case of few readout tones and minimal degradation with all 2048 tones. Planned upgrades and future work are also discussed. The Gen3 MKID readout system is fully open-source and is expected to facilitate future array scaling to megapixel-sized formats and increase the feasibility of deploying UVOIR MKIDs in space. △ Less

Submitted 14 June, 2024; originally announced June 2024.

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Authors: Nemanja Jovanovic, Pradip Gatkine, Narsireddy Anugu, Rodrigo Amezcua-Correa, Ritoban Basu Thakur, Charles Beichman, Chad Bender, Jean-Philippe Berger, Azzurra Bigioli, Joss Bland-Hawthorn, Guillaume Bourdarot, Charles M. Bradford, Ronald Broeke, Julia Bryant, Kevin Bundy, Ross Cheriton, Nick Cvetojevic, Momen Diab, Scott A. Diddams, Aline N. Dinkelaker, Jeroen Duis, Stephen Eikenberry, Simon Ellis, Akira Endo, Donald F. Figer , et al. (55 additional authors not shown)

Abstract: Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilizatio… ▽ More Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms. △ Less

Submitted 1 November, 2023; originally announced November 2023.

Comments: 191 pages, 47 figures. This is the version of the article before peer review or editing, as submitted by an author to J. Phys. Photonics. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://iopscience.iop.org/article/10.1088/2515-7647/ace869/meta

Journal ref: J. Phys. Photonics 5 042501 (2023)

Improved Flexible Coaxial Ribbon Cable for High-Density Superconducting Arrays

Authors: Jennifer Pearl Smith, Benjamin A. Mazin, Alirio Boaventura, Kyle J. Thompson, Miguel Daal

Abstract: Superconducting arrays often require specialized, high-density cryogenic cabling capable of transporting electrical signals across temperature stages with minimal loss, crosstalk, and thermal conductivity. We report improvements to the design and fabrication of previously published superconducting 53 wt% Nb-47 wt% Ti (Nb47Ti) FLexible coAXial ribbon cables (FLAX). We used 3D electromagnetic simula… ▽ More Superconducting arrays often require specialized, high-density cryogenic cabling capable of transporting electrical signals across temperature stages with minimal loss, crosstalk, and thermal conductivity. We report improvements to the design and fabrication of previously published superconducting 53 wt% Nb-47 wt% Ti (Nb47Ti) FLexible coAXial ribbon cables (FLAX). We used 3D electromagnetic simulations to inform design changes to improve the characteristic impedance of the cable and the connector transition. We increased the center conductor diameter from 0.003 inches to 0.005 inches which lowered the cable characteristic impedance from $\sim$60 $Ω$ to $\sim$53 $Ω$. This change had a negligible impact on the computed heat load which we estimate to be 5 nW per trace from 1 K to 100 mK with a 1-ft cable. This is approximately half the heat load calculated for the smallest commercially available superconducting coax. We also modified the transition board to include a capacitive coupling between the upper ground plane and signal traces that mitigates the inductive transition. We tested these changes in a 5-trace, 1-ft long cable at 4 K and found the microwave transmission improved from 6 dB to 1.5 dB of attenuation at 8 GHz. This loss is comparable to commercial superconducting coax and 3$\times$ lower than commercial NbTi-on-polyimide flex cables at 8 GHz. The nearest-neighbor forward crosstalk remained less than -40 dB at 8 GHz. We compare key performance metrics with commercially available superconducting coax and NbTi-on-polyimide flex cables and we share initial progress on commercialization of this technology by Maybell Quantum Industries. △ Less

Submitted 29 June, 2023; v1 submitted 23 June, 2023; originally announced June 2023.

Characterizing the Dark Count Rate of a Large-Format MKID Array

Authors: Noah Swimmer, W. Hawkins Clay, Nicholas Zobrist, Benjamin A. Mazin

Abstract: We present an empirical measurement of the dark count rate seen in a large-format MKID array identical to those currently in use at observatories such as Subaru on Maunakea. This work provides compelling evidence for their utility in future experiments that require low-count rate, quiet environments such as dark matter direct detection. Across the bandpass from 0.946-1.534 eV (1310-808 nm) an aver… ▽ More We present an empirical measurement of the dark count rate seen in a large-format MKID array identical to those currently in use at observatories such as Subaru on Maunakea. This work provides compelling evidence for their utility in future experiments that require low-count rate, quiet environments such as dark matter direct detection. Across the bandpass from 0.946-1.534 eV (1310-808 nm) an average count rate of $(1.847\pm0.003)\times10^{-3}$ photons/pixel/s is measured. Breaking this bandpass into 5 equal-energy bins based on the resolving power of the detectors we find the average dark count rate seen in an MKID is $(6.26\pm0.04)\times10^{-4}$ photons/pixel/s from 0.946-1.063 eV and $(2.73\pm0.02)\times10^{-4}$ photons/pixel/s at 1.416-1.534eV. Using lower-noise readout electronics to read out a single MKID pixel we demonstrate that the events measured while the detector is not illuminated largely appear to be a combination of real photons, possible fluorescence caused by cosmic rays, and phonon events in the array substrate. We also find that using lower-noise readout electronics on a single MKID pixel we measure a dark count rate of $(9.3\pm0.9)\times10^{-4}$ photons/pixel/s over the same bandpass (0.946-1.534 eV) With the single-pixel readout we also characterize the events when the detectors are not illuminated and show that these responses in the MKID are distinct from photons from known light sources such as a laser, likely coming from cosmic ray excitations. △ Less

Submitted 7 February, 2023; originally announced February 2023.

Comments: 20 pages, 9 figures, 3 tables. Accepted by Optics Express

Surveying Nearby Brown Dwarfs with HGCA: Direct Imaging Discovery of a Faint, High-Mass Brown Dwarf Orbiting HD 176535 A

Authors: Yiting Li, Timothy D. Brandt, G. Mirek Brandt, Qier An, Kyle Franson, Trent J. Dupuy, Minghan Chen, Rachel Bowens-Rubin, Briley L. Lewis, Brendan P. Bowler, Aidan Gibbs, Rocio Kiman, Jacqueline Faherty, Thayne Currie, Rebecca Jensen-Clem, Hengyue Zhang Ezequiel Contreras-Martinez, Michael P. Fitzgerald, Benjamin A. Mazin, Maxwell Millar-Blanchaer

Abstract: Brown dwarfs with well-measured masses, ages and luminosities provide direct benchmark tests of substellar formation and evolutionary models. We report the first results from a direct imaging survey aiming to find and characterize substellar companions to nearby accelerating stars with the assistance of the Hipparcos-Gaia Catalog of Accelerations (HGCA). In this paper, we present a joint high-cont… ▽ More Brown dwarfs with well-measured masses, ages and luminosities provide direct benchmark tests of substellar formation and evolutionary models. We report the first results from a direct imaging survey aiming to find and characterize substellar companions to nearby accelerating stars with the assistance of the Hipparcos-Gaia Catalog of Accelerations (HGCA). In this paper, we present a joint high-contrast imaging and astrometric discovery of a substellar companion to HD 176535 A, a K3.5V main-sequence star aged approximately $3.59_{-1.15}^{+0.87}$ Gyrs at a distance of $36.99 \pm 0.03$ pc. In advance of our high-contrast imaging observations, we combined precision HARPS RVs and HGCA astrometry to predict the potential companion's location and mass. We thereafter acquired two nights of KeckAO/NIRC2 direct imaging observations in the $L'$ band, which revealed a companion with a contrast of $ΔL'_p = 9.20\pm0.06$ mag at a projected separation of $\approx$0.$\!\!''35$ ($\approx$13 AU) from the host star. We revise our orbital fit by incorporating our dual-epoch relative astrometry using the open-source MCMC orbit fitting code $\tt orvara$. HD 176535 B is a new benchmark dwarf useful for constraining the evolutionary and atmospheric models of high-mass brown dwarfs. We found a luminosity of $\rm log(L_{bol}/L_{\odot}) = -5.26\pm0.07$ and a model-dependent effective temperature of $980 \pm 35$ K for HD 176535 B. Our dynamical mass suggests that some substellar evolutionary models may be underestimating luminosity for high-mass T dwarfs. Given its angular separation and luminosity, HD 176535 B would make a promising candidate for Aperture Masking Interferometry with JWST and GRAVITY/KPIC, and further spectroscopic characterization with instruments like the CHARIS/SCExAO/Subaru integral field spectrograph. △ Less

Submitted 16 May, 2023; v1 submitted 25 January, 2023; originally announced January 2023.

Probing Photon Statistics in Adaptive Optics Images with SCExAO/MEC

Authors: Sarah Steiger, Timothy D. Brandt, Olivier Guyon, Noah Swimmer, Alexander B. Walter, Clinton Bockstiegel, Julien Lozi, Vincent Deo, Sebastien Vievard, Nour Skaf, Kyohoon Ahn, Nemanja Jovanovic, Frantz Martinache, Benjamin A. Mazin

Abstract: We present an experimental study of photon statistics for high-contrast imaging with the Microwave Kinetic Inductance Detector (MKID) Exoplanet Camera (MEC) located behind the Subaru Coronagraphic Extreme Adaptive Optics System (SCExAO) at the Subaru Telescope. We show that MEC measures the expected distributions for both on-axis companion intensity and off-axis intensity which manifests as quasi-… ▽ More We present an experimental study of photon statistics for high-contrast imaging with the Microwave Kinetic Inductance Detector (MKID) Exoplanet Camera (MEC) located behind the Subaru Coronagraphic Extreme Adaptive Optics System (SCExAO) at the Subaru Telescope. We show that MEC measures the expected distributions for both on-axis companion intensity and off-axis intensity which manifests as quasi-static speckles in the image plane and currently limits high-contrast imaging performance. These statistics can be probed by any MEC observation due to the photon-counting capabilities of MKID detectors. Photon arrival time statistics can also be used to directly distinguish companions from speckles using a post-processing technique called Stochastic Speckle Discrimination (SSD). Here, we we give an overview of the SSD technique and highlight the first demonstration of SSD on an extended source -- the protoplanetary disk AB Aurigae. We then present simulations that provide an in-depth exploration as to the current limitations of an extension of the SSD technique called Photon-Counting SSD (PCSSD) to provide a path forward for transitioning PCSSD from simulations to on-sky results. We end with a discussion of how to further improve the efficacy of such arrival time based post-processing techniques applicable to both MKIDs, as well as other high speed astronomical cameras. △ Less

Submitted 13 September, 2022; originally announced September 2022.

Comments: 11 pages, 9 figures, accepted for publication in AJ

SCExAO and Keck Direct Imaging Discovery of a Low-Mass Companion Around the Accelerating F5 Star HIP 5319

Authors: Noah Swimmer, Thayne Currie, Sarah Steiger, Gregory Mirek Brandt, Timothy D. Brandt, Olivier Guyon, Masayuki Kuzuhara, Jeffrey Chilcote, Taylor Tobin, Tyler D. Groff, Julien Lozi, John I. Bailey III, Alexander B. Walter, Neelay Fruitwala, Nicholas Zobrist, Jennifer Pearl Smith, Gregoire Coiffard, Rupert Dodkins, Kristina K. Davis, Miguel Daal, Bruce Bumble, Sebastien Vievard, Nour Skaf, Vincent Deo, Nemanja Jovanovic , et al. (4 additional authors not shown)

Abstract: We present the direct imaging discovery of a low-mass companion to the nearby accelerating F star, HIP 5319, using SCExAO coupled with the CHARIS, VAMPIRES, and MEC instruments in addition to Keck/NIRC2 imaging. CHARIS $JHK$ (1.1-2.4 $μ$m) spectroscopic data combined with VAMPIRES 750 nm, MEC $Y$, and NIRC2 $L_{\rm p}$ photometry is best matched by an M3--M7 object with an effective temperature of… ▽ More We present the direct imaging discovery of a low-mass companion to the nearby accelerating F star, HIP 5319, using SCExAO coupled with the CHARIS, VAMPIRES, and MEC instruments in addition to Keck/NIRC2 imaging. CHARIS $JHK$ (1.1-2.4 $μ$m) spectroscopic data combined with VAMPIRES 750 nm, MEC $Y$, and NIRC2 $L_{\rm p}$ photometry is best matched by an M3--M7 object with an effective temperature of T=3200 K and surface gravity log($g$)=5.5. Using the relative astrometry for HIP 5319 B from CHARIS and NIRC2 and absolute astrometry for the primary from $Gaia$ and $Hipparcos$ and adopting a log-normal prior assumption for the companion mass, we measure a dynamical mass for HIP 5319 B of $31^{+35}_{-11}M_{\rm J}$, a semimajor axis of $18.6^{+10}_{-4.1}$ au, an inclination of $69.4^{+5.6}_{-15}$ degrees, and an eccentricity of $0.42^{+0.39}_{-0.29}$. However, using an alternate prior for our dynamical model yields a much higher mass of 128$^{+127}_{-88}M_{\rm J}$. Using data taken with the LCOGT NRES instrument we also show that the primary HIP 5319 A is a single star in contrast to previous characterizations of the system as a spectroscopic binary. This work underscores the importance of assumed priors in dynamical models for companions detected with imaging and astrometry and the need to have an updated inventory of system measurements. △ Less

Submitted 30 July, 2022; originally announced August 2022.

Comments: 19 pages, 9 figuresm 5 tables

Membrane-less phonon trap** and resolution enhancement in optical microwave kinetic inductance detectors

Authors: Nicholas Zobrist, W. Hawkins Clay, Grégoire Coiffard, Miguel Daal, Noah Swimmer, Peter Day, Benjamin A. Mazin

Abstract: Microwave Kinetic Inductance Detectors (MKIDs) sensitive to light in the ultraviolet to near-infrared wavelengths are superconducting micro-resonators that are capable of measuring photon arrival times to microsecond precision and estimating each photon's energy. The resolving power of non-membrane MKIDs has remained stubbornly around 10 at 1 $μ$m despite significant improvements in the system noi… ▽ More Microwave Kinetic Inductance Detectors (MKIDs) sensitive to light in the ultraviolet to near-infrared wavelengths are superconducting micro-resonators that are capable of measuring photon arrival times to microsecond precision and estimating each photon's energy. The resolving power of non-membrane MKIDs has remained stubbornly around 10 at 1 $μ$m despite significant improvements in the system noise. Here we show that the resolving power can be roughly doubled with a simple bilayer design without needing to place the device on a membrane, avoiding a significant increase in fabrication complexity. Based on modeling of the phonon propagation, we find that the majority of the improvement comes from the inability of high energy phonons to enter the additional layer due to the lack of available phonon states. △ Less

Submitted 28 April, 2022; originally announced April 2022.

Highly-Multiplexed Superconducting Detector Readout: Approachable High-Speed FPGA Design

Authors: Jennifer Pearl Smith, John I. Bailey, III., Benjamin A. Mazin

Abstract: This work presents the design and preliminary performance of a highly-multiplexed superconducting detector readout. The readout system is implemented on the Xilinx ZCU111 RFSoC Evaluation Board. The current design uses 12% of the DSPs, 60% of the LUTs, 20% of the FFs, and 30% of the BRAM and makes timing at 512 MHz. The system uses two integrated ADCs and DACs running at 4.096 GSPS to read out 2,0… ▽ More This work presents the design and preliminary performance of a highly-multiplexed superconducting detector readout. The readout system is implemented on the Xilinx ZCU111 RFSoC Evaluation Board. The current design uses 12% of the DSPs, 60% of the LUTs, 20% of the FFs, and 30% of the BRAM and makes timing at 512 MHz. The system uses two integrated ADCs and DACs running at 4.096 GSPS to read out 2,048 superconducting detectors. This work targets a 2x increase in the number of superconducting detectors processed per board with 80% less power than previous readout schemes. The open-source design leverages modern FPGA productivity tools including Vivado High-Level Synthesis to create all custom IP blocks, PYNQ to test and verify individual IP and develop Python drivers, and Vivado ML Intelligent Design Runs to close timing. We emphasize strategies for achieving timing closure without custom HDL which we expect to be useful for superconducting device groups looking to utilize FPGAs in high-performance applications without specialized knowledge in FPGA design. △ Less

Submitted 30 March, 2022; originally announced March 2022.

Comments: 30th IEEE International Symposium On Field-Programmable Custom Computing Machines (accepted as poster)

ACM Class: C.3

Photon counting from the vacuum ultraviolet to the short wavelength infrared using semiconductor and superconducting technologies

Authors: Jonathan Asaadi, Dan Baxter, Karl K. Berggren, Davide Braga, Serge A. Charlebois, Clarence Chang, Angelo Dragone, Alex Drlica-Wagner, Carlos O. Escobar, Juan Estrada, Farah Fahim, Michael Febbraro, Guillermo Fernandez Moroni, Stephen Holland, Todd Hossbach, Stewart Koppell, Christopher Leitz, Agustina Magnoni, Benjamin A. Mazin, Jean-François Pratte, Bernie Rauscher, Dario Rodrigues, Lingjia Shen, Miguel Sofo-Haro, Javier Tiffenberg , et al. (5 additional authors not shown)

Abstract: In the last decade, several photon counting technologies have been developed opening a new window for experiments in the low photon number regime. Several ongoing and future projects in HEP benefit from these developments, which will also have a large impact outside HEP. During the next decade there is a clear technological opportunity to fully develop these sensors and produce a large impact in H… ▽ More In the last decade, several photon counting technologies have been developed opening a new window for experiments in the low photon number regime. Several ongoing and future projects in HEP benefit from these developments, which will also have a large impact outside HEP. During the next decade there is a clear technological opportunity to fully develop these sensors and produce a large impact in HEP. In this white paper we discuss the need for photon counting technologies in future projects, and present some technological opportunities to address those needs. △ Less

Submitted 23 March, 2022; originally announced March 2022.

The MKID Science Data Pipeline

Authors: Sarah Steiger, John I. Bailey III, Nicholas Zobrist, Noah Swimmer, Rupert Dodkins, Kristina K. Davis, Benjamin A. Mazin

Abstract: We present The MKID Pipeline, a general use science data pipeline for the reduction and analysis of ultraviolet, optical and infrared (UVOIR) Microwave Kinetic Inductance Detector (MKID) data sets. This paper provides an introduction to the nature of MKID data sets, an overview of the calibration steps included in the pipeline, and an introduction to the implementation of the software. We present The MKID Pipeline, a general use science data pipeline for the reduction and analysis of ultraviolet, optical and infrared (UVOIR) Microwave Kinetic Inductance Detector (MKID) data sets. This paper provides an introduction to the nature of MKID data sets, an overview of the calibration steps included in the pipeline, and an introduction to the implementation of the software. △ Less

Submitted 2 March, 2022; originally announced March 2022.

Comments: 12 pages, 8 figures

Improving the energy resolution of photon counting Microwave Kinetic Inductance Detectors using principal component analysis

Authors: Jacob M. Miller, Nicholas Zobrist, Gerhard Ulbricht, Benjamin A. Mazin

Abstract: We develop a photon energy measurement scheme for single photon counting Microwave Kinetic Inductance Detectors (MKIDs) that uses principal component analysis (PCA) to measure the energy of an incident photon from the signal ("photon pulse") generated by the detector. PCA can be used to characterize a photon pulse using an arbitrarily large number of features and therefore PCA-based energy measure… ▽ More We develop a photon energy measurement scheme for single photon counting Microwave Kinetic Inductance Detectors (MKIDs) that uses principal component analysis (PCA) to measure the energy of an incident photon from the signal ("photon pulse") generated by the detector. PCA can be used to characterize a photon pulse using an arbitrarily large number of features and therefore PCA-based energy measurement does not rely on the assumption of an energy-independent pulse shape that is made in standard filtering techniques. A PCA-based method for energy measurement is especially useful in applications where the detector is operating near its saturation energy and pulse shape varies strongly with photon energy. It has been shown previously that PCA using two principal components can be used as an energy-measurement scheme. We extend upon these ideas and develop a method for measuring the energies of photons by characterizing their pulse shapes using any number of principal components and any number of calibration energies. Applying this technique with 50 principal components, we show improvements to a previously-reported energy resolution for Thermal Kinetic Inductance Detectors (TKIDs) from 75 eV to 43 eV at 5.9 keV. We also apply this technique with 50 principal components to data from an optical to near-IR MKID and achieve energy resolutions that are consistent with the best results from existing analysis techniques. △ Less

Submitted 2 November, 2021; originally announced November 2021.

Orbital Parameters and Binary Properties of 37 FGK stars in the Cores of Open Clusters NGC 2516 and NGC 2422

Authors: Isabel Lipartito, John I. Bailey, Timothy D. Brandt, Benjamin A. Mazin, Mario Mateo, Meghin E. Spencer, Ian U. Roederer

Abstract: We present orbits for 24 binaries in the field of open cluster NGC 2516 (~150 Myr) and 13 binaries in the field of open cluster NGC 2422 (~130 Myr) using results from a multi-year radial velocity survey of the cluster cores. Six of these systems are double-lined spectroscopic binaries (SB2s). We fit these RV variable systems with orvara, a MCMC-based fitting program that models Keplerian orbits. W… ▽ More We present orbits for 24 binaries in the field of open cluster NGC 2516 (~150 Myr) and 13 binaries in the field of open cluster NGC 2422 (~130 Myr) using results from a multi-year radial velocity survey of the cluster cores. Six of these systems are double-lined spectroscopic binaries (SB2s). We fit these RV variable systems with orvara, a MCMC-based fitting program that models Keplerian orbits. We use precise stellar parallaxes and proper motions from Gaia EDR3 to determine cluster membership. We impose a barycentric radial velocity prior on all cluster members; this significantly improves our orbital constraints. Two of our systems have periods between 5 and 15 days, the critical window in which tides efficiently damp orbital eccentricity. These binaries should be included in future analyses of circularization across similarly-aged clusters. We also find a relatively flat distribution of binary mass ratios, consistent with previous work. With the inclusion of TESS lightcurves for all available targets, we identity target 378-036252 as a new eclipsing binary. We also identify a field star whose secondary has a mass in the brown dwarf range, as well as two cluster members whose RVs suggest the presence of an additional companion. Our orbital fits will help constrain the binary fraction and binary properties across stellar age and across stellar environment. △ Less

Submitted 5 October, 2021; originally announced October 2021.

Comments: 38 pages, 47 figures (incl. 37 Appendix figures), 4 tables. AJ accepted

SCExAO, a testbed for develo** high-contrast imaging technologies for ELTs

Authors: Kyohoon Ahn, Olivier Guyon, Julien Lozi, Sébastien Vievard, Vincent Deo, Nour Skaf, Ruslan Belikov, Steven P. Bos, Michael Bottom, Thayne Currie, Richard Frazin, Kyle V. Gorkom, Tyler D. Groff, Sebastiaan Y. Haffert, Nemanja Jovanovic, Hajime Kawahara, Takayuki Kotani, Jared R. Males, Frantz Martinache, Benjamin A. Mazin, Kelsey Miller, Barnaby Norris, Alexander Rodack, Alison Wong

Abstract: To directly detect exoplanets and protoplanetary disks, the development of high accuracy wavefront sensing and control (WFS&C) technologies is essential, especially for ground-based Extremely Large Telescopes (ELTs). The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument is a high-contrast imaging platform to discover and characterize exoplanets and protoplanetary disks. It also serv… ▽ More To directly detect exoplanets and protoplanetary disks, the development of high accuracy wavefront sensing and control (WFS&C) technologies is essential, especially for ground-based Extremely Large Telescopes (ELTs). The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument is a high-contrast imaging platform to discover and characterize exoplanets and protoplanetary disks. It also serves as a testbed to validate and deploy new concepts or algorithms for high-contrast imaging approaches for ELTs, using the latest hardware and software technologies on an 8-meter class telescope. SCExAO is a multi-band instrument, using light from 600 to 2500 nm, and delivering a high Strehl ratio (>80% in median seeing in H-band) downstream of a low-order correction provided by the facility AO188. Science observations are performed with coronagraphs, an integral field spectrograph, or single aperture interferometers. The SCExAO project continuously reaches out to the community for development and upgrades. Existing operating testbeds such as the SCExAO are also unique opportunities to test and deploy the new technologies for future ELTs. We present and show a live demonstration of the SCExAO capabilities (Real-time predictive AO control, Focal plane WFS&C, etc) as a host testbed for the remote collaborators to test and deploy the new WFS&C concepts or algorithms. We also present several high-contrast imaging technologies that are under development or that have already been demonstrated on-sky. △ Less

Submitted 28 September, 2021; v1 submitted 27 September, 2021; originally announced September 2021.

Comments: 13 pages, 8 figures, 2021 SPIE Optics+Photonics

The Planetary Systems Imager Adaptive Optics System: An Initial Optical Design and Performance Analysis Tools for the PSI-Red AO System

Authors: Rebecca Jensen-Clem, Philip M. Hinz, M. A. M. van Kooten, Michael P. Fitzgerald, Steph Sallum, Benjamin A. Mazin, Mark Chun, Claire Max, Maxwell Millar-Blanchaer, Andy Skemer, Ji Wang, R. Deno Stelter, Olivier Guyon

Abstract: The Planetary Systems Imager (PSI) is a proposed instrument for the Thirty Meter Telescope (TMT) that provides an extreme adaptive optics (AO) correction to a multi-wavelength instrument suite optimized for high contrast science. PSI's broad range of capabilities, spanning imaging, polarimetry, integral field spectroscopy, and high resolution spectroscopy from 0.6-5 microns, with a potential chann… ▽ More The Planetary Systems Imager (PSI) is a proposed instrument for the Thirty Meter Telescope (TMT) that provides an extreme adaptive optics (AO) correction to a multi-wavelength instrument suite optimized for high contrast science. PSI's broad range of capabilities, spanning imaging, polarimetry, integral field spectroscopy, and high resolution spectroscopy from 0.6-5 microns, with a potential channel at 10 microns, will enable breakthrough science in the areas of exoplanet formation and evolution. Here, we present a preliminary optical design and performance analysis toolset for the 2-5 microns component of the PSI AO system, which must deliver the wavefront quality necessary to support infrared high contrast science cases. PSI-AO is a two-stage system, with an initial deformable mirror and infrared wavefront sensor providing a common wavefront correction to all PSI science instruments followed by a dichroic that separates "PSI-Red" (2-5 microns) from "PSI-Blue" (0.5-1.8 microns). To meet the demands of visible-wavelength high contrast science, the PSI-Blue arm will include a second deformable mirror and a visible-wavelength wavefront sensor. In addition to an initial optical design of the PSI-Red AO system, we present a preliminary set of tools for an end-to-end AO simulation that in future work will be used to demonstrate the planet-to-star contrast ratios achievable with PSI-Red. △ Less

Submitted 7 September, 2021; originally announced September 2021.

Comments: 13 pages, 8 figures, submitted to SPIE Optical Engineering + Applications 2021, Techniques and Instrumentation for Detection of Exoplanets X

End-to-end Deep Learning Pipeline for Microwave Kinetic Inductance Detector (MKID) Resonator Identification and Tuning

Authors: Neelay Fruitwala, Alex B Walter, John I Bailey III, Rupert Dodkins, Benjamin A Mazin

Abstract: We present the development of a machine learning based pipeline to fully automate the calibration of the frequency comb used to read out optical/IR Microwave Kinetic Inductance Detector (MKID) arrays. This process involves determining the resonant frequency and optimal drive power of every pixel (i.e. resonator) in the array, which is typically done manually. Modern optical/IR MKID arrays, such as… ▽ More We present the development of a machine learning based pipeline to fully automate the calibration of the frequency comb used to read out optical/IR Microwave Kinetic Inductance Detector (MKID) arrays. This process involves determining the resonant frequency and optimal drive power of every pixel (i.e. resonator) in the array, which is typically done manually. Modern optical/IR MKID arrays, such as DARKNESS (DARK-speckle Near-infrared Energy-resolving Superconducting Spectrophotometer) and MEC (MKID Exoplanet Camera), contain 10-20,000 pixels, making the calibration process extremely time consuming; each 2000 pixel feedline requires 4-6 hours of manual tuning. Here we present a pipeline which uses a single convolutional neural network (CNN) to perform both resonator identification and tuning simultaneously. We find that our pipeline has performance equal to that of the manual tuning process, and requires just twelve minutes of computational time per feedline. △ Less

Submitted 2 April, 2021; originally announced April 2021.

Comments: 28 pages, 13 figures

SCExAO/MEC and CHARIS Discovery of a Low Mass, 6 AU-Separation Companion to HIP 109427 using Stochastic Speckle Discrimination and High-Contrast Spectroscopy

Authors: Sarah Steiger, Thayne Currie, Timothy D. Brandt, Olivier Guyon, Masayuki Kuzuhara, Jeffrey Chilcote, Tyler D. Groff, Julien Lozi, Alexander B. Walter, Neelay Fruitwala, John I. Bailey III, Nicholas Zobrist, Noah Swimmer, Isabel Lipartito, Jennifer Pearl Smith, Clint Bockstiegel, Seth R. Meeker, Gregoire Coiffard, Rupert Dodkins, Paul Szypryt, Kristina K. Davis, Miguel Daal, Bruce Bumble, Sebastien Vievard, Ananya Sahoo , et al. (6 additional authors not shown)

Abstract: We report the direct imaging discovery of a low-mass companion to the nearby accelerating A star, HIP 109427, with the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument coupled with the MKID Exoplanet Camera (MEC) and CHARIS integral field spectrograph. CHARIS data reduced with reference star PSF subtraction yield 1.1-2.4 $μ$m spectra. MEC reveals the companion in $Y$ and $J$ band a… ▽ More We report the direct imaging discovery of a low-mass companion to the nearby accelerating A star, HIP 109427, with the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument coupled with the MKID Exoplanet Camera (MEC) and CHARIS integral field spectrograph. CHARIS data reduced with reference star PSF subtraction yield 1.1-2.4 $μ$m spectra. MEC reveals the companion in $Y$ and $J$ band at a comparable signal-to-noise ratio using stochastic speckle discrimination, with no PSF subtraction techniques. Combined with complementary follow-up $L_{\rm p}$ photometry from Keck/NIRC2, the SCExAO data favors a spectral type, effective temperature, and luminosity of M4-M5.5, 3000-3200 $K$, and $\log_{10}(L/L_{\rm \odot}) = -2.28^{+0.04}_{-0.04}$, respectively. Relative astrometry of HIP 109427 B from SCExAO/CHARIS and Keck/NIRC2, and complementary Gaia-Hipparcos absolute astrometry of the primary favor a semimajor axis of $6.55^{+3.0}_{-0.48}$ au, an eccentricity of $0.54^{+0.28}_{-0.15}$, an inclination of $66.7^{+8.5}_{-14}$ degrees, and a dynamical mass of $0.280^{+0.18}_{-0.059}$ $M_{\odot}$. This work shows the potential for extreme AO systems to utilize speckle statistics in addition to widely-used post-processing methods to directly image faint companions to nearby stars near the telescope diffraction limit. △ Less

Submitted 12 July, 2021; v1 submitted 11 March, 2021; originally announced March 2021.

Comments: 13 pages, 7 figures, 3 tables

Journal ref: The Astronomical Journal, Volume 162, Number 2, 2021

Improving the dynamic range of single photon counting kinetic inductance detectors

Authors: Nicholas Zobrist, Nikita Klimovich, Byeong Ho Eom, Grégoire Coiffard, Miguel Daal, Noah Swimmer, Sarah Steiger, Bruce Bumble, Henry G. LeDuc, Peter Day, Benjamin A. Mazin

Abstract: We develop a simple coordinate transformation which can be employed to compensate for the nonlinearity introduced by a Microwave Kinetic Inductance Detector's (MKID) homodyne readout scheme. This coordinate system is compared to the canonically used polar coordinates and is shown to improve the performance of the filtering method often used to estimate a photon's energy. For a detector where the c… ▽ More We develop a simple coordinate transformation which can be employed to compensate for the nonlinearity introduced by a Microwave Kinetic Inductance Detector's (MKID) homodyne readout scheme. This coordinate system is compared to the canonically used polar coordinates and is shown to improve the performance of the filtering method often used to estimate a photon's energy. For a detector where the coordinate nonlinearity is primarily responsible for limiting its resolving power, this technique leads to increased dynamic range, which we show by applying the transformation to data from a hafnium MKID designed to be sensitive to photons with wavelengths in the 800 to 1300 nm range. The new coordinates allow the detector to resolve photons with wavelengths down to 400 nm, raising the resolving power at that wavelength from 6.8 to 17. △ Less

Submitted 9 December, 2020; originally announced December 2020.

Second Generation Readout For Large Format Photon Counting Microwave Kinetic Inductance Detectors

Authors: Neelay Fruitwala, Paschal Strader, Gustavo Cancelo, Ted Zmuda, Ken Treptow, Neal Wilcer, Chris Stoughton, Alex B. Walter, Nicholas Zobrist, Giulia Collura, Isabel Lipartito, John I. Bailey III, Benjamin A. Mazin

Abstract: We present the development of a second generation digital readout system for photon counting microwave kinetic inductance detector (MKID) arrays operating in the optical and near-IR wavelength bands. Our system retains much of the core signal processing architecture from the first generation system, but with a significantly higher bandwidth, enabling readout of kilopixel MKID arrays. Each set of r… ▽ More We present the development of a second generation digital readout system for photon counting microwave kinetic inductance detector (MKID) arrays operating in the optical and near-IR wavelength bands. Our system retains much of the core signal processing architecture from the first generation system, but with a significantly higher bandwidth, enabling readout of kilopixel MKID arrays. Each set of readout boards is capable of reading out 1024 MKID pixels multiplexed over 2 GHz of bandwidth; two such units can be placed in parallel to read out a full 2048 pixel microwave feedline over a 4 -- 8 GHz band. As in the first generation readout, our system is capable of identifying, analyzing, and recording photon detection events in real time with a time resolution of order a few microseconds. Here, we describe the hardware and firmware, and present an analysis of the noise properties of the system. We also present a novel algorithm for efficiently suppressing IQ mixer sidebands to below -30 dBc. △ Less

Submitted 12 November, 2020; originally announced November 2020.

Comments: 12 pages, 12 figures

The MKID Exoplanet Camera for Subaru SCExAO

Authors: Alexander B. Walter, Neelay Fruitwala, Sarah Steiger, John I. Bailey III, Nicholas Zobrist, Noah Swimmer, Isabel Lipartito, Jennifer Pearl Smith, Seth R. Meeker, Clint Bockstiegel, Gregoire Coiffard, Rupert Dodkins, Paul Szypryt, Kristina K. Davis, Miguel Daal, Bruce Bumble, Giulia Collura, Olivier Guyon, Julien Lozi, Sebastien Vievard, Nemanja Jovanovic, Frantz Martinache, Thayne Currie, Benjamin A. Mazin

Abstract: We present the MKID Exoplanet Camera (MEC), a z through J band (800 - 1400 nm) integral field spectrograph located behind The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) at the Subaru Telescope on Maunakea that utilizes Microwave Kinetic Inductance Detectors (MKIDs) as the enabling technology for high contrast imaging. MEC is the first permanently deployed near-infrared MKID instrument a… ▽ More We present the MKID Exoplanet Camera (MEC), a z through J band (800 - 1400 nm) integral field spectrograph located behind The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) at the Subaru Telescope on Maunakea that utilizes Microwave Kinetic Inductance Detectors (MKIDs) as the enabling technology for high contrast imaging. MEC is the first permanently deployed near-infrared MKID instrument and is designed to operate both as an IFU, and as a focal plane wavefront sensor in a multi-kHz feedback loop with SCExAO. The read noise free, fast time domain information attainable by MKIDs allows for the direct probing of fast speckle fluctuations that currently limit the performance of most high contrast imaging systems on the ground and will help MEC achieve its ultimate goal of reaching contrasts of $10^{-7}$ at 2$λ/ D$. Here we outline the instrument details of MEC including the hardware, firmware, and data reduction and analysis pipeline. We then discuss MEC's current on-sky performance and end with future upgrades and plans. △ Less

Submitted 23 October, 2020; originally announced October 2020.

Comments: To be published in Publications of the Astronomical Society of the Pacific

First Principle Simulator of a Stochastically Varying Image Plane for Photon-Counting High Contrast Applications

Authors: R. H. Dodkins, K. Davis, B. Lewis, S. Mahashabde, B. A. Mazin, I. A. Lipartito, N. Fruitwala, K. O'Brien, N. Thatte

Abstract: Optical and near-infrared Microwave Kinetic Inductance Detectors, or MKIDs, are low-temperature detectors with inherent spectral resolution that are able to instantly register individual photons with potentially no false counts or readout noise. These properties make MKIDs transformative for exoplanet direct imaging by enabling photon-statistics-based planet-discrimination techniques as well as pe… ▽ More Optical and near-infrared Microwave Kinetic Inductance Detectors, or MKIDs, are low-temperature detectors with inherent spectral resolution that are able to instantly register individual photons with potentially no false counts or readout noise. These properties make MKIDs transformative for exoplanet direct imaging by enabling photon-statistics-based planet-discrimination techniques as well as performing conventional noise-subtraction techniques on shorter timescales. These detectors are in the process of rapid development, and as such, the full extent of their performance enhancing potential has not yet be quantified. MKID Exoplanet Direct Imaging Simulator, or MEDIS, is a general-purpose end-to-end numerical simulator for high-contrast observations with MKIDs. The simulator exploits current optical propagation libraries and augments them with a new MKIDs simulation module to provide a pragmatic model of many of the degradation effects present during the detection process. We use MEDIS to demonstrate how changes in various MKID properties affect the contrast-separation performance when conventional differential imaging techniques are applied to low-flux, short duration observations. We show that to improve performance at close separations will require increasing the maximum count rate or pixel sampling when there is high residual flux after the coronagraph. We predict that taking pixel yield from the value achieved by current instruments of 80% and increasing it to 100% would result in an improvement in contrast of a factor of $\sim$ 4 at 3$λ/D$ and $\sim$ 8 at 6$λ/D$. Achieving better contrast performance in this low flux regime would then require exploiting the information encoded in the photon arrival time statistics. △ Less

Submitted 30 July, 2020; originally announced July 2020.

Flexible Coaxial Ribbon Cable for High-Density Superconducting Microwave Device Arrays

Authors: Jennifer Pearl Smith, Benjamin A. Mazin, Alex B. Walter, Miguel Daal, J. I. Bailey, III, Clinton Bockstiegel, Nicholas Zobrist, Noah Swimmer, Sarah Steiger, Neelay Fruitwala

Abstract: Superconducting electronics often require high-density microwave interconnects capable of transporting signals between temperature stages with minimal loss, cross talk, and heat conduction. We report the design and fabrication of superconducting 53 wt% Nb-47 wt% Ti (Nb47Ti) FLexible coAXial ribbon cables (FLAX). The ten traces each consist of a 0.076 mm O.D. NbTi inner conductor insulated with PFA… ▽ More Superconducting electronics often require high-density microwave interconnects capable of transporting signals between temperature stages with minimal loss, cross talk, and heat conduction. We report the design and fabrication of superconducting 53 wt% Nb-47 wt% Ti (Nb47Ti) FLexible coAXial ribbon cables (FLAX). The ten traces each consist of a 0.076 mm O.D. NbTi inner conductor insulated with PFA (0.28 mm O.D.) and sheathed in a shared 0.025 mm thick Nb47Ti outer conductor. The cable is terminated with G3PO coaxial push-on connectors via stainless steel capillary tubing (1.6 mm O.D., 0.13 mm thick) soldered to a coplanar wave guide transition board. The 30 cm long cable has 1 dB of loss at 8 GHz with -60 dB nearest-neighbor forward cross talk. The loss is 0.5 dB more than commercially available superconducting coax likely due to impedance mismatches caused by manufacturing imperfections in the cable. The reported cross talk is 30 dB lower than previously developed laminated NbTi-onKapton microstrip cables. We estimate the heat load from 1 K to 90 mK to be 20 nW per trace, approximately half the computed load from the smallest commercially available superconducting coax from CryoCoax △ Less

Submitted 13 July, 2020; originally announced July 2020.

Comments: in IEEE Transactions on Applied Superconductivity

Superconducting Materials for Microwave Kinetic Inductance Detectors

Authors: Benjamin A. Mazin

Abstract: The superconducting materials that make up an MKID have a significant effect on its performance. The $T_\textrm{c}$ and normal state resistivity $ρ_\textrm{N}$ of the film determine the penetration depth $λ$ and therefore how much kinetic inductance it has. The ratio of kinetic inductance to total inductance ($α$), the volume of the inductor, and $Q_\textrm{m}$ determines the magnitude of the resp… ▽ More The superconducting materials that make up an MKID have a significant effect on its performance. The $T_\textrm{c}$ and normal state resistivity $ρ_\textrm{N}$ of the film determine the penetration depth $λ$ and therefore how much kinetic inductance it has. The ratio of kinetic inductance to total inductance ($α$), the volume of the inductor, and $Q_\textrm{m}$ determines the magnitude of the response to incoming energy. The quasiparticle lifetime $τ_\textrm{qp}$ is the characteristic time during which the MKID's surface impedance is modified by the incoming energy. Many materials have been explored for use in superconducting resonators and MKIDs, but that information is often not published or scattered around the literature. This chapter contains information and references on the work that has been done with thin film lithographed circuits for MKIDs over the last two decades. Note that measured material properties such as the internal loss quality factor $Q_\textrm{i}$ and quasiparticle lifetime $τ_\textrm{qp}$ vary significantly depending on how the MKID superconducting thin film is made and the system they are measured in, so it is best to interpret all stated values as typical but not definitive. Values are omitted in cases when there aren't enough measurements or there is too much disagreement in the literature to estimate a typical value. In order to be as complete as possible some unpublished results from the author's lab are included and can be identified by the lack of a reference. Unless noted all films are polycrystalline or amorphous. △ Less

Submitted 28 April, 2020; originally announced April 2020.

Comments: 19 pages, 4 figures. To appear in the Handbook of Superconducting Materials

Characterization of sputtered hafnium thin films for high quality factor microwave kinetic inductance detectors

Authors: G. Coiffard, M. Daal, N. Zobrist, N. Swimmer, S. Steiger, B. Bumble, B. A. Mazin

Abstract: Hafnium is an elemental superconductor which crystallizes in a hexagonal close packed structure, has a transition temperature $T_{C} \simeq 400 mK$, and has a high normal state resistivity around $90 μΩ. cm$. In Microwave Kinetic Inductance Detectors (MKIDs), these properties are advantageous since they allow for creating detectors sensitive to optical and near infra-red radiation. In this work, w… ▽ More Hafnium is an elemental superconductor which crystallizes in a hexagonal close packed structure, has a transition temperature $T_{C} \simeq 400 mK$, and has a high normal state resistivity around $90 μΩ. cm$. In Microwave Kinetic Inductance Detectors (MKIDs), these properties are advantageous since they allow for creating detectors sensitive to optical and near infra-red radiation. In this work, we study how sputter conditions and especially the power applied to the target during the deposition, affect the hafnium $T_{C}$, resistivity, stress, texture and preferred crystal orientation. We find that the position of the target with respect to the substrate strongly affects the orientation of the crystallites in the films and the internal quality factor, $Q_{i}$, of MKIDs fabricated from the films. In particular, we demonstrate that a DC magnetron sputter deposition at a normal angle of incidence, low pressure, and low plasma power promotes the growth of compressive (002)-oriented films and that such films can be used to make high quality factor MKIDs with $Q_{i}$ up to 600,000. △ Less

Submitted 1 April, 2020; originally announced April 2020.

Comments: 9 pages, 8 figures, 1 table. Submitted to SUST

Design and Performance of Hafnium Optical and Near-IR Kinetic Inductance Detectors

Authors: Nicholas Zobrist, Grégoire Coiffard, Bruce Bumble, Noah Swimmer, Sarah Steiger, Miguel Daal, Giulia Collura, Alex B. Walter, Clint Bockstiegel, Neelay Fruitwala, Isabel Lipartito, Benjamin A. Mazin

Abstract: We report on the design and performance of Microwave Kinetic Inductance Detectors (MKIDs) sensitive to single photons in the optical to near-infrared range using hafnium as the sensor material. Our test device had a superconducting transition temperature of 395 mK and a room temperature normal state resistivity of 97 $μΩ$ cm with an RRR = 1.6. Resonators on the device displayed internal quality fa… ▽ More We report on the design and performance of Microwave Kinetic Inductance Detectors (MKIDs) sensitive to single photons in the optical to near-infrared range using hafnium as the sensor material. Our test device had a superconducting transition temperature of 395 mK and a room temperature normal state resistivity of 97 $μΩ$ cm with an RRR = 1.6. Resonators on the device displayed internal quality factors of around 200,000. Similar to the analysis of MKIDs made from other highly resistive superconductors, we find that modeling the temperature response of the detector requires an extra broadening parameter in the superconducting density of states. Finally, we show that this material and design is compatible with a full-array fabrication process which resulted in pixels with decay times of about 40 $μ$s and resolving powers of ~9 at 800 nm. △ Less

Submitted 14 November, 2019; originally announced November 2019.

Optical and Near-IR Microwave Kinetic Inductance Detectors (MKIDs) in the 2020s

Authors: Benjamin A. Mazin, Jeb Bailey, Jo Bartlett, Clint Bockstiegel, Bruce Bumble, Gregoire Coiffard, Thayne Currie, Miguel Daal, Kristina Davis, Rupert Dodkins, Neelay Fruitwala, Nemanja Jovanovic, Isabel Lipartito, Julien Lozi, Jared Males, Dimitri Mawet, Seth Meeker, Kieran O'Brien, Michael Rich, Jenny Smith, Sarah Steiger, Noah Swimmer, Alex Walter, Nick Zobrist, Jonas Zmuidzinas

Abstract: Optical and near-IR Microwave Kinetic Inductance Detectors, or MKIDs, are superconducting photon counting detectors capable of measuring the energy and arrival time of individual OIR photons without read noise or dark current. In this whitepaper we will discuss the current status of OIR MKIDs and MKID-based instruments. Optical and near-IR Microwave Kinetic Inductance Detectors, or MKIDs, are superconducting photon counting detectors capable of measuring the energy and arrival time of individual OIR photons without read noise or dark current. In this whitepaper we will discuss the current status of OIR MKIDs and MKID-based instruments. △ Less

Submitted 7 August, 2019; originally announced August 2019.

Comments: Astro2020 APC Whitepaper. 16 pages, 10 figures

Wide-band Parametric Amplifier Readout and Resolution of Optical Microwave Kinetic Inductance Detectors

Authors: Nicholas Zobrist, Byeong Ho Eom, Peter Day, Benjamin A. Mazin, Seth R. Meeker, Bruce Bumble, Henry G. LeDuc, Gérgoire Coiffard, Paul Szypryt, Neelay Fruitwala, Isabel Lipartito, Clint Bockstiegel

Abstract: The energy resolution of a single photon counting Microwave Kinetic Inductance Detector (MKID) can be degraded by noise coming from the primary low temperature amplifier in the detector's readout system. Until recently, quantum limited amplifiers have been incompatible with these detectors due to dynamic range, power, and bandwidth constraints. However, we show that a kinetic inductance based trav… ▽ More The energy resolution of a single photon counting Microwave Kinetic Inductance Detector (MKID) can be degraded by noise coming from the primary low temperature amplifier in the detector's readout system. Until recently, quantum limited amplifiers have been incompatible with these detectors due to dynamic range, power, and bandwidth constraints. However, we show that a kinetic inductance based traveling wave parametric amplifier can be used for this application and reaches the quantum limit. The total system noise for this readout scheme was equal to ~2.1 in units of quanta. For incident photons in the 800 to 1300 nm range, the amplifier increased the average resolving power of the detector from ~6.7 to 9.3 at which point the resolution becomes limited by noise on the pulse height of the signal. Noise measurements suggest that a resolving power of up to 25 is possible if redesigned detectors can remove this additional noise source. △ Less

Submitted 6 July, 2019; originally announced July 2019.

Stochastic Speckle Discrimination with Time-Tagged Photon Lists: Digging Below the Speckle Noise Floor

Authors: Alex B. Walter, Clinton Bockstiegel, Timothy D. Brandt, Benjamin A. Mazin

Abstract: We present an algorithm that uses the distribution of photon arrival times to distinguish speckles from incoherent sources, like planets and disks, in high contrast images. Using simulated data, we show that our approach can overcome the noise limit from fluctuating speckle intensity. The algorithm is likely to be most advantageous when a coronagraph limits the coherent diffraction pattern in the… ▽ More We present an algorithm that uses the distribution of photon arrival times to distinguish speckles from incoherent sources, like planets and disks, in high contrast images. Using simulated data, we show that our approach can overcome the noise limit from fluctuating speckle intensity. The algorithm is likely to be most advantageous when a coronagraph limits the coherent diffraction pattern in the image plane but the intensity is still strongly modulated by fast-timescale uncorrected stellar light, for example from atmospheric turbulence. These conditions are common at small inner working angles and will allow probing of exoplanet populations at smaller angular separations. The technique requires a fast science camera that can temporally resolve the speckle fluctuations, and the detection of many photons per speckle decorrelation time. Since the algorithm directly extracts the incoherent light, standard differential imaging post-processing techniques can be performed afterwards to further boost the signal. △ Less

Submitted 7 June, 2019; originally announced June 2019.

Journal ref: PASP, 131, 2019, 114506

Direct Imaging in Reflected Light: Characterization of Older, Temperate Exoplanets With 30-m Telescopes

Authors: Etienne Artigau, Rebecca A. Bernstein, Timothy Brandt, Jeffrey Chilcote, Laird Close, Ian Crossfield, Jacques-Robert Delorme, Courtney Dressing, Michael P. Fitzgerald, Jonathan Fortney, Andrew Howard, Richard Frazin, Nemanja Jovanovic, Quinn Konopacky, Julien Lozi, Jared R. Males, Christian Marois, Benjamin A. Mazin, Max A. Millar-Blanchaer, Katie M. Morzinski, Lewis Roberts, Eugene Serabyn, Gautam Vasisht, J. Kent Wallace, Ji Wang

Abstract: Direct detection, also known as direct imaging, is a method for discovering and characterizing the atmospheres of planets at intermediate and wide separations. It is the only means of obtaining spectra of non-transiting exoplanets. Characterizing the atmospheres of planets in the <5 AU regime, where RV surveys have revealed an abundance of other worlds, requires a 30-m-class aperture in combinatio… ▽ More Direct detection, also known as direct imaging, is a method for discovering and characterizing the atmospheres of planets at intermediate and wide separations. It is the only means of obtaining spectra of non-transiting exoplanets. Characterizing the atmospheres of planets in the <5 AU regime, where RV surveys have revealed an abundance of other worlds, requires a 30-m-class aperture in combination with an advanced adaptive optics system, coronagraph, and suite of spectrometers and imagers - this concept underlies planned instruments for both TMT (the Planetary Systems Imager, or PSI) and the GMT (GMagAO-X). These instruments could provide astrometry, photometry, and spectroscopy of an unprecedented sample of rocky planets, ice giants, and gas giants. For the first time habitable zone exoplanets will become accessible to direct imaging, and these instruments have the potential to detect and characterize the innermost regions of nearby M-dwarf planetary systems in reflected light. High-resolution spectroscopy will not only illuminate the physics and chemistry of exo-atmospheres, but may also probe rocky, temperate worlds for signs of life in the form of atmospheric biomarkers (combinations of water, oxygen and other molecular species). By completing the census of non-transiting worlds at a range of separations from their host stars, these instruments will provide the final pieces to the puzzle of planetary demographics. This whitepaper explores the science goals of direct imaging on 30-m telescopes and the technology development needed to achieve them. △ Less

Submitted 29 August, 2018; originally announced August 2018.

Comments: (March 2018) Submitted to the Exoplanet Science Strategy committee of the NAS

Real-time estimation and correction of quasi-static aberrations in ground-based high contrast imaging systems with high frame-rates

Authors: Alexander T. Rodack, Jared R. Males, Olivier Guyon, Benjamin A. Mazin, Michael P. Fitzgerald, Dimitri Mawet

Abstract: The success of ground-based, high contrast imaging for the detection of exoplanets in part depends on the ability to differentiate between quasi-static speckles caused by aberrations not corrected by adaptive optics (AO) systems, known as non-common path aberrations (NCPAs), and the planet intensity signal. Frazin (ApJ, 2013) introduced a post-processing algorithm demonstrating that simultaneous m… ▽ More The success of ground-based, high contrast imaging for the detection of exoplanets in part depends on the ability to differentiate between quasi-static speckles caused by aberrations not corrected by adaptive optics (AO) systems, known as non-common path aberrations (NCPAs), and the planet intensity signal. Frazin (ApJ, 2013) introduced a post-processing algorithm demonstrating that simultaneous millisecond exposures in the science camera and wavefront sensor (WFS) can be used with a statistical inference procedure to determine both the series expanded NCPA coefficients and the planetary signal. We demonstrate, via simulation, that using this algorithm in a closed-loop AO system, real-time estimation and correction of the quasi-static NCPA is possible without separate deformable mirror (DM) probes. Thus the use of this technique allows for the removal of the quasi-static speckles that can be mistaken for planetary signals without the need for new optical hardware, improving the efficiency of ground-based exoplanet detection. In our simulations, we explore the behavior of the Frazin Algorithm (FA) and the dependence of its convergence to an accurate estimate on factors such as Strehl ratio, NCPA strength, and number of algorithm search basis functions. We then apply this knowledge to simulate running the algorithm in real-time in a nearly ideal setting. We then discuss adaptations that can be made to the algorithm to improve its real-time performance, and show their efficacy in simulation. A final simulation tests the technique's resilience against imperfect knowledge of the AO residual phase, motivating an analysis of the feasibility of using this technique in a real closed-loop Extreme AO system such as SCExAO or MagAO-X, in terms of computational complexity and the accuracy of the estimated quasi-static NCPA correction. △ Less

Submitted 11 July, 2018; originally announced July 2018.

Comments: 10 pages, 6 figures

Journal ref: Proc. SPIE 10703, Adaptive Optics Systems VI, 107032N (10 July 2018); doi: 10.1117/12.2312218;

DARKNESS: A Microwave Kinetic Inductance Detector Integral Field Spectrograph for High-Contrast Astronomy

Authors: Seth R. Meeker, Benjamin A. Mazin, Alex B. Walter, Paschal Strader, Neelay Fruitwala, Clint Bockstiegel, Paul Szypryt, Gerhard Ulbricht, Gregoire Coiffard, Bruce Bumble, Gustavo Cancelo, Ted Zmuda, Ken Treptow, Neal Wilcer, Giulia Collura, Rupert Dodkins, Isabel Lipartito, Nicholas Zobrist, Michael Bottom, J. Chris Shelton, Dimitri Mawet, Julian C. van Eyken, Gautam Vasisht, Eugene Serabyn

Abstract: We present DARKNESS (the DARK-speckle Near-infrared Energy-resolving Superconducting Spectrophotometer), the first of several planned integral field spectrographs to use optical/near-infrared Microwave Kinetic Inductance Detectors (MKIDs) for high-contrast imaging. The photon counting and simultaneous low-resolution spectroscopy provided by MKIDs will enable real-time speckle control techniques an… ▽ More We present DARKNESS (the DARK-speckle Near-infrared Energy-resolving Superconducting Spectrophotometer), the first of several planned integral field spectrographs to use optical/near-infrared Microwave Kinetic Inductance Detectors (MKIDs) for high-contrast imaging. The photon counting and simultaneous low-resolution spectroscopy provided by MKIDs will enable real-time speckle control techniques and post-processing speckle suppression at framerates capable of resolving the atmospheric speckles that currently limit high-contrast imaging from the ground. DARKNESS is now operational behind the PALM-3000 extreme adaptive optics system and the Stellar Double Coronagraph at Palomar Observatory. Here we describe the motivation, design, and characterization of the instrument, early on-sky results, and future prospects. △ Less

Submitted 16 April, 2018; v1 submitted 28 March, 2018; originally announced March 2018.

Comments: 17 pages, 17 figures. PASP Published

Journal ref: Publications of the Astronomical Society of the Pacific, Volume 130, Number 988, 065001 (2018)

Large-format platinum silicide microwave kinetic inductance detectors for optical to near-IR astronomy

Authors: P. Szypryt, S. R. Meeker, G. Coiffard, N. Fruitwala, B. Bumble, G. Ulbricht, A. B. Walter, M. Daal, C. Bockstiegel, G. Collura, N. Zobrist, I. Lipartito, B. A. Mazin

Abstract: We have fabricated and characterized 10,000 and 20,440 pixel Microwave Kinetic Inductance Detector (MKID) arrays for the Dark-speckle Near-IR Energy-resolved Superconducting Spectrophotometer (DARKNESS) and the MKID Exoplanet Camera (MEC). These instruments are designed to sit behind adaptive optics systems with the goal of directly imaging exoplanets in a 800-1400 nm band. Previous large optical… ▽ More We have fabricated and characterized 10,000 and 20,440 pixel Microwave Kinetic Inductance Detector (MKID) arrays for the Dark-speckle Near-IR Energy-resolved Superconducting Spectrophotometer (DARKNESS) and the MKID Exoplanet Camera (MEC). These instruments are designed to sit behind adaptive optics systems with the goal of directly imaging exoplanets in a 800-1400 nm band. Previous large optical and near-IR MKID arrays were fabricated using substoichiometric titanium nitride (TiN) on a silicon substrate. These arrays, however, suffered from severe non-uniformities in the TiN critical temperature, causing resonances to shift away from their designed values and lowering usable detector yield. We have begun fabricating DARKNESS and MEC arrays using platinum silicide (PtSi) on sapphire instead of TiN. Not only do these arrays have much higher uniformity than the TiN arrays, resulting in higher pixel yields, they have demonstrated better spectral resolution than TiN MKIDs of similar design. PtSi MKIDs also do not display the hot pixel effects seen when illuminating TiN on silicon MKIDs with photons with wavelengths shorter than 1 um. △ Less

Submitted 19 October, 2017; originally announced October 2017.

Comments: 16 pages, 8 figures, published in Optics Express

Journal ref: Opt. Express 25 (2017) 25894-25909

High Quality Factor Platinum Silicide Microwave Kinetic Inductance Detectors

Authors: P. Szypryt, B. A. Mazin, G. Ulbricht, B. Bumble, S. R. Meeker, C. Bockstiegel, A. B. Walter

Abstract: We report on the development of Microwave Kinetic Inductance Detectors (MKIDs) using platinum silicide as the sensor material. MKIDs are an emerging superconducting detector technology, capable of measuring the arrival times of single photons to better than two microseconds and their energies to around ten percent. Previously, MKIDs have been fabricated using either sub-stoichiometric titanium nit… ▽ More We report on the development of Microwave Kinetic Inductance Detectors (MKIDs) using platinum silicide as the sensor material. MKIDs are an emerging superconducting detector technology, capable of measuring the arrival times of single photons to better than two microseconds and their energies to around ten percent. Previously, MKIDs have been fabricated using either sub-stoichiometric titanium nitride or aluminum, but TiN suffers from spatial inhomogeneities in the superconducting critical temperature and Al has a low kinetic inductance fraction, causing low detector sensitivity. To address these issues, we have instead fabricated PtSi microresonators with superconducting critical temperatures of 944$\pm$12~mK and high internal quality factors ($Q_i \gtrsim 10^6$). These devices show typical quasiparticle lifetimes of $τ_{qp} \approx 30$--$40~μ$s and spectral resolution, $R = λ/ Δλ$, of 8 at 406.6~nm. We compare PtSi MKIDs to those fabricated with TiN and detail the substantial advantages that PtSi MKIDs have to offer. △ Less

Submitted 3 October, 2016; originally announced October 2016.

Comments: 5 pages, 5 figures, accepted by APL

Search for Optical Pulsations in PSR J0337+1715

Authors: M. J. Strader, A. M. Archibald, S. R. Meeker, P. Szypryt, A. B. Walter, J. C. van Eyken, G. Ulbricht, C. Stoughton, B. Bumble, D. L. Kaplan, B. A. Mazin

Abstract: We report on a search for optical pulsations from PSR J0337+1715 at its observed radio pulse period. PSR J0337+1715 is a millisecond pulsar (2.7 ms spin period) in a triple hierarchical system with two white dwarfs, and has a known optical counterpart with g-band magnitude 18. The observations were done with the Array Camera for Optical to Near-IR Spectrophotometry (ARCONS) at the 200" Hale telesc… ▽ More We report on a search for optical pulsations from PSR J0337+1715 at its observed radio pulse period. PSR J0337+1715 is a millisecond pulsar (2.7 ms spin period) in a triple hierarchical system with two white dwarfs, and has a known optical counterpart with g-band magnitude 18. The observations were done with the Array Camera for Optical to Near-IR Spectrophotometry (ARCONS) at the 200" Hale telescope at Palomar Observatory. No significant pulsations were found in the range 4000-11000 angstroms, and we can limit pulsed emission in g-band to be fainter than 25 mag. △ Less

Submitted 16 March, 2016; originally announced March 2016.

Comments: 4 pages, 2 figures, accepted to MNRAS

Peculiar Velocity Constraints from Five-Band SZ Effect Measurements Towards RX J1347.5-1145 with MUSIC and Bolocam from the CSO

Authors: Jack Sayers, Michael Zemcov, Jason Glenn, Sunil R. Golwala, Philip R. Maloney, Seth R. Siegel, Jordan Wheeler, Clint Bockstiegel, Spencer Brugger, Nicole G. Czakon, Peter K. Day, Thomas P. Downes, Ran P. Duan, Jiansong Gao, Matthew I. Hollister, Albert Lam, Henry G. LeDuc, Benjamin A. Mazin, Sean G. McHugh, David A. Miller, Tony K. Mroczkowski, Omid Noroozian, Hien T. Nguyen, Simon J. Radford, James A. Schlaerth , et al. (3 additional authors not shown)

Abstract: We present Sunyaev-Zel'dovich (SZ) effect measurements from wide-field images towards the galaxy cluster RX J1347.5-1145 obtained from the Caltech Submillimeter Observatory with the Multiwavelength Submillimeter Inductance Camera (MUSIC) at 147, 213, 281, and 337 GHz and with Bolocam at 140 GHz. As part of our analysis, we have used higher frequency data from Herschel-SPIRE and previously publishe… ▽ More We present Sunyaev-Zel'dovich (SZ) effect measurements from wide-field images towards the galaxy cluster RX J1347.5-1145 obtained from the Caltech Submillimeter Observatory with the Multiwavelength Submillimeter Inductance Camera (MUSIC) at 147, 213, 281, and 337 GHz and with Bolocam at 140 GHz. As part of our analysis, we have used higher frequency data from Herschel-SPIRE and previously published lower frequency radio data to subtract the signal from the brightest dusty star-forming galaxies behind RX J1347.5-1145 and from the AGN in RX J1347.5-1145's BCG. Using these five-band SZ effect images, combined with X-ray spectroscopic measurements of the temperature of the intra-cluster medium (ICM) from Chandra, we constrain the ICM optical depth to be $τ_e = 7.33^{+0.96}_{-0.97} \times 10^{-3}$ and the ICM line of sight peculiar velocity to be $v_{pec} = -1040^{+870}_{-840}$ km s$^{-1}$. The errors for both quantities are limited by measurement noise rather than calibration uncertainties or astrophysical contamination, and significant improvements are possible with deeper observations. Our best-fit velocity is in good agreement with one previously published SZ effect analysis and in mild tension with the other, although some or all of that tension may be because that measurement samples a much smaller cluster volume. Furthermore, our best-fit optical depth implies a gas mass slightly larger than the Chandra-derived value, implying the cluster is elongated along the line of sight. △ Less

Submitted 1 March, 2016; v1 submitted 9 September, 2015; originally announced September 2015.

Comments: Accepted for publication in ApJ

The ARCONS Pipeline: Data Reduction for MKID Arrays

Authors: J. C. van Eyken, M. J. Strader, A. B. Walter, S. R. Meeker, P. Szypryt, C. Stoughton, K. O'Brien, D. Marsden, N. K. Rice, Y. Lin, B. A. Mazin

Abstract: The Array Camera for Optical to Near-IR Spectrophotometry, or ARCONS, is a camera based on Microwave Kinetic Inductance Detectors (MKIDs), a new technology that has the potential for broad application in astronomy. Using an array of MKIDs, the instrument is able to produce time-resolved imaging and low-resolution spectroscopy constructed from detections of individual photons. The arrival time and… ▽ More The Array Camera for Optical to Near-IR Spectrophotometry, or ARCONS, is a camera based on Microwave Kinetic Inductance Detectors (MKIDs), a new technology that has the potential for broad application in astronomy. Using an array of MKIDs, the instrument is able to produce time-resolved imaging and low-resolution spectroscopy constructed from detections of individual photons. The arrival time and energy of each photon are recorded in a manner similar to X-ray calorimetry, but at higher photon fluxes. The technique works over a very large wavelength range, is free from fundamental read noise and dark-current limitations, and provides microsecond-level timing resolution. Since the instrument reads out all pixels continuously while exposing, there is no loss of active exposure time to readout. The technology requires a different approach to data reduction compared to conventional CCDs. We outline here the prototype data reduction pipeline developed for ARCONS, though many of the principles are also more broadly applicable to energy-resolved photon counting arrays (e.g., transition edge sensors, superconducting tunnel junctions). We describe the pipeline's current status, and the algorithms and techniques employed in taking data from the arrival of photons at the MKID array to the production of images, spectra, and time-resolved light curves. △ Less

Submitted 20 July, 2015; originally announced July 2015.

Comments: 16 pages, 19 figures, pdflatex, accepted for ApJS

Highly Multiplexible Thermal Kinetic Inductance Detectors for X-Ray Imaging Spectroscopy

Authors: Gerhard Ulbricht, Benjamin A. Mazin, Paul Szypryt, Alex B. Walter, Clint Bockstiegel, Bruce Bumble

Abstract: For X-ray imaging spectroscopy, high spatial resolution over a large field of view is often as important as high energy resolution, but current X-ray detectors do not provide both in the same device. Thermal Kinetic Inductance Detectors (TKIDs) are being developed as they offer a feasible way to combine the energy resolution of transition edge sensors with pixel counts approaching CCDs and thus pr… ▽ More For X-ray imaging spectroscopy, high spatial resolution over a large field of view is often as important as high energy resolution, but current X-ray detectors do not provide both in the same device. Thermal Kinetic Inductance Detectors (TKIDs) are being developed as they offer a feasible way to combine the energy resolution of transition edge sensors with pixel counts approaching CCDs and thus promise significant improvements for many X-ray spectroscopy applications. TKIDs are a variation of Microwave Kinetic Inductance Detectors (MKIDs) and share their multiplexibility: working MKID arrays with 2024 pixels have recently been demonstrated and much bigger arrays are under development. In this work, we present our first working TKID prototypes which are able to achieve an energy resolution of 75 eV at 5.9 keV, even though their general design still has to be optimized. We further describe TKID fabrication, characterization, multiplexing and working principle and demonstrate the necessity of a data fitting algorithm in order to extract photon energies. With further design optimizations we expect to be able to improve our TKID energy resolution to less than 10 eV at 5.9 keV. △ Less

Submitted 24 June, 2015; originally announced June 2015.

Comments: 7 pages, 4 figures, accepted for publication in Applied Physics Letters

Science with KRAKENS

Authors: Benjamin A. Mazin, George Becker, Kevin France, Wesley Fraser, D. Andrew Howell, Tucker Jones, Seth Meeker, Kieran O'Brien, Jason X. Prochaska, Brian Siana, Matthew Strader, Paul Szypryt, Shriharsh P. Tendulkar, Tommaso Treu, Gautam Vasisht

Abstract: The Keck science community is entering an era of unprecedented change. Powerful new instrument like ZTF, JWST, LSST, and the ELTs will catalyze this change, and we must be ready to take full advantage to maintain our position of scientific leadership. The best way to do this is to continue the UC and Caltech tradition of technical excellence in instrumentation. In this whitepaper we describe a new… ▽ More The Keck science community is entering an era of unprecedented change. Powerful new instrument like ZTF, JWST, LSST, and the ELTs will catalyze this change, and we must be ready to take full advantage to maintain our position of scientific leadership. The best way to do this is to continue the UC and Caltech tradition of technical excellence in instrumentation. In this whitepaper we describe a new instrument called KRAKENS to help meet these challenges. KRAKENS uses a unique detector technology (MKIDs) to enable groundbreaking science across a wide range of astrophysical research topics. This document will lay out the detailed expected science return of KRAKENS. △ Less

Submitted 10 June, 2015; originally announced June 2015.

Comments: 19 pages, 17 figures

Ultraviolet, Optical, and Near-IR Microwave Kinetic Inductance Detector Materials Developments

Authors: P. Szypryt, B. A. Mazin, B. Bumble, H. G. Leduc, L. Baker

Abstract: We have fabricated 2024 pixel microwave kinetic inductance detector (MKID) arrays in the ultraviolet/optical/near-IR (UVOIR) regime that are currently in use in astronomical instruments. In order to make MKIDs desirable for novel instruments, larger arrays with nearly perfect yield need to be fabricated. As array size increases, however, the percent yield often decreases due to frequency collision… ▽ More We have fabricated 2024 pixel microwave kinetic inductance detector (MKID) arrays in the ultraviolet/optical/near-IR (UVOIR) regime that are currently in use in astronomical instruments. In order to make MKIDs desirable for novel instruments, larger arrays with nearly perfect yield need to be fabricated. As array size increases, however, the percent yield often decreases due to frequency collisions in the readout. The per-pixel performance must also be improved, namely the energy resolution. We are investigating ways to reduce frequency collisions and to improve the per pixel performance of our devices through new superconducting material systems and fabrication techniques. There are two main routes that we are currently exploring. First, we are attempting to create more uniform titanium nitride films through the use of atomic layer deposition rather than the more traditional sputtering method. In addition, we are experimenting with completely new material systems for MKIDs, such as platinum silicide. △ Less

Submitted 1 December, 2014; originally announced December 2014.

Comments: 4 pages, 2 figures, accepted for publication in IEEE Transactions on Applied Superconductivity

Journal ref: IEEE Transactions on Applied Superconductivity 25 (2016) 1-4

Direct Detection of SDSS J0926+3624 Orbital Expansion with ARCONS

Authors: P. Szypryt, G. E. Duggan, B. A. Mazin, S. R. Meeker, M. J. Strader, J. C. van Eyken, D. Marsden, K. O'Brien, A. B. Walter, G. Ulbricht, T. A. Prince, C. Stoughton, B. Bumble

Abstract: AM Canum Venaticorum (AM CVn) stars belong to a class of ultra-compact, short period binaries with spectra dominated largely by helium. SDSS J0926+3624 is of particular interest as it is the first observed eclipsing AM CVn system. We observed SDSS J0926+3624 with the \textbf{Ar}ray \textbf{C}amera for \textbf{O}ptical to \textbf{N}ear-IR \textbf{S}pectrophotometry (ARCONS) at the Palomar 200" tele… ▽ More AM Canum Venaticorum (AM CVn) stars belong to a class of ultra-compact, short period binaries with spectra dominated largely by helium. SDSS J0926+3624 is of particular interest as it is the first observed eclipsing AM CVn system. We observed SDSS J0926+3624 with the \textbf{Ar}ray \textbf{C}amera for \textbf{O}ptical to \textbf{N}ear-IR \textbf{S}pectrophotometry (ARCONS) at the Palomar 200" telescope. ARCONS uses a relatively new type of energy-resolved photon counters called Microwave Kinetic Inductance Detectors (MKIDs). ARCONS, sensitive to radiation from 350 to 1100 nm, has a time resolution of several microseconds and can measure the energy of a photon to $\sim10%$. We present the light curves for these observations and examine changes in orbital period from prior observations. Using a quadratic ephemeris model, we measure a period rate of change $\dot{P} = (3.07 \pm 0.56)\times 10^{-13}$. In addition, we use the high timing resolution of ARCONS to examine the system's high frequency variations and search for possible quasi-periodic oscillations (QPOs). Finally, we use the instrument's spectral resolution to examine the light curves in various wavelength bands. We do not find any high frequency QPOs or significant spectral variability throughout an eclipse. △ Less

Submitted 16 September, 2013; originally announced September 2013.

Comments: 8 pages, 7 figures, submitted to MNRAS

Excess Optical Enhancement Observed with ARCONS for Early Crab Giant Pulses

Authors: M. J. Strader, M. D. Johnson, B. A. Mazin, G. V. Spiro Jaeger, C. R. Gwinn, S. R. Meeker, P. Szypryt, J. C. van Eyken, D. Marsden, K. O'Brien, A. B. Walter, G. Ulbricht, C. Stoughton, B. Bumble

Abstract: We observe an extraordinary link in the Crab pulsar between the enhancement of an optical pulse and the timing of the corresponding giant radio pulse. At optical through infrared wavelengths, our observations use the high time resolution of ARCONS, a unique superconducting energy-resolving photon-counting array at the Palomar 200-inch telescope. At radio wavelengths, we observe with the Robert C.… ▽ More We observe an extraordinary link in the Crab pulsar between the enhancement of an optical pulse and the timing of the corresponding giant radio pulse. At optical through infrared wavelengths, our observations use the high time resolution of ARCONS, a unique superconducting energy-resolving photon-counting array at the Palomar 200-inch telescope. At radio wavelengths, we observe with the Robert C. Byrd Green Bank Telescope and the GUPPI backend. We see an $11.3\pm2.5\%$ increase in peak optical flux for pulses that have an accompanying giant radio pulse arriving near the peak of the optical main pulse, in contrast to a $3.2\pm0.5\%$ increase when an accompanying giant radio pulse arrives soon after the optical peak. We also observe that the peak of the optical main pulse is $2.8\pm0.8\%$ enhanced when there is a giant radio pulse accompanying the optical interpulse. We observe no statistically significant spectral differences between optical pulses accompanied by and not accompanied by giant radio pulses. Our results extend previous observations of optical-radio correlation to the time and spectral domains. Our refined temporal correlation suggests that optical and radio emission are indeed causally linked, and the lack of spectral differences suggests that the same mechanism is responsible for all optical emission. △ Less

Submitted 8 November, 2013; v1 submitted 12 September, 2013; originally announced September 2013.

Comments: 5 pages, 5 figures. Updated to match revised version, accepted to ApJL Nov 7, 2013. Several additions and improved DM in timing solution

Journal ref: Astrophys. J. Lett. 779, L12 (2013)

Giga-z: A 100,000 Object Superconducting Spectrophotometer for LSST Follow-up

Authors: Danica Marsden, Benjamin A. Mazin, Kieran O'Brien, Chris Hirata

Abstract: We simulate the performance of a new type of instrument, a Superconducting Multi-Object Spectrograph (SuperMOS), that uses Microwave Kinetic Inductance Detectors (MKIDs). MKIDs, a new detector technology, feature good QE in the UVOIR, can count individual photons with microsecond timing accuracy and, like X-ray calorimeters, determine their energy to several percent. The performance of Giga-z, a S… ▽ More We simulate the performance of a new type of instrument, a Superconducting Multi-Object Spectrograph (SuperMOS), that uses Microwave Kinetic Inductance Detectors (MKIDs). MKIDs, a new detector technology, feature good QE in the UVOIR, can count individual photons with microsecond timing accuracy and, like X-ray calorimeters, determine their energy to several percent. The performance of Giga-z, a SuperMOS designed for wide field imaging follow-up observations, is evaluated using simulated observations of the COSMOS mock catalog with an array of 100,000 R_{423 nm} = E/ΔE = 30 MKID pixels. We compare our results against a simultaneous simulation of LSST observations. In three years on a dedicated 4 m-class telescope, Giga-z could observe ~ 2 billion galaxies, yielding a low resolution spectral energy distribution (SED) spanning 350 - 1350 nm for each; 1000 times the number measured with any currently proposed LSST spectroscopic follow-up, at a fraction of the cost and time. Giga-z would provide redshifts for galaxies up to z ~ 6 with magnitudes m_i < 25, with accuracy σ_{Δz/(1+z)} = 0.03 for the whole sample, and σ_{Δz/(1+z)} = 0.007 for a select subset. We also find catastrophic failure rates and biases that are consistently lower than for LSST. The added constraint on Dark Energy parameters for WL+CMB by Giga-z using the FoMSWG default model is equivalent to multiplying the LSST Fisher matrix by a factor of α= 1.27 (w_p), 1.53 (w_a), or 1.98 (Δγ). This is equivalent to multiplying both the LSST coverage area and the training sets by α, and reducing all systematics by a factor of 1/sqrt(α), advantages that are robust to even more extreme models of intrinsic alignment. △ Less

Submitted 18 July, 2013; originally announced July 2013.

Comments: 16 pages, 10 figures, 5 tables. Accepted for publication in ApJS

Journal ref: ApJS, 208, 8 (2013)

ARCONS: A 2024 Pixel Optical through Near-IR Cryogenic Imaging Spectrophotometer

Authors: B. A. Mazin, S. R. Meeker, M. J. Strader, B. Bumble, K. O'Brien, P. Szypryt, D. Marsden, J. C. van Eyken, G. E. Duggan, G. Ulbricht, C. Stoughton, M. Johnson

Abstract: We present the design, construction, and commissioning results of ARCONS, the Array Camera for Optical to Near-IR Spectrophotometry. ARCONS is the first ground-based instrument in the optical through near-IR wavelength range based on Microwave Kinetic Inductance Detectors (MKIDs). MKIDs are revolutionary cryogenic detectors, capable of detecting single photons and measuring their energy without fi… ▽ More We present the design, construction, and commissioning results of ARCONS, the Array Camera for Optical to Near-IR Spectrophotometry. ARCONS is the first ground-based instrument in the optical through near-IR wavelength range based on Microwave Kinetic Inductance Detectors (MKIDs). MKIDs are revolutionary cryogenic detectors, capable of detecting single photons and measuring their energy without filters or gratings, similar to an X-ray microcalorimeter. MKIDs are nearly ideal, noiseless photon detectors, as they do not suffer from read noise or dark current and have nearly perfect cosmic ray rejection. ARCONS is an Integral Field Spectrograph (IFS) containing a lens-coupled 2024 pixel MKID array yielding a 20"x20" field of view, and has been deployed on the Palomar 200" and Lick 120" telescopes for 24 nights of observing. We present initial results showing that ARCONS and its MKID arrays are now a fully operational and powerful tool for astronomical observations. △ Less

Submitted 19 June, 2013; originally announced June 2013.

Comments: 12 pages, 16 figures, submitted to PASP

Sputtered TiN films for superconducting coplanar waveguide resonators

Authors: Shinobu Ohya, Ben Chiaro, Anthony Megrant, Charles Neill, Rami Barends, Yu Chen, Julian Kelly, David Low, Josh Mutus, Peter O'Malley, Pedram Roushan, Daniel Sank, Amit Vainsencher, James Wenner, Theodore C. White, Yi Yin, B. D. Schultz, Chris J Palmstrøm, Benjamin A. Mazin, Andrew N. Cleland, John M. Martinis

Abstract: We present a systematic study of the properties of TiN films by varying the deposition conditions in an ultra-high-vacuum reactive magnetron sputtering chamber. By increasing the deposition pressure from 2 to 9 mTorr while kee** a nearly stoichiometric composition of Ti(1-x)N(x) (x=0.5), the film resistivity increases, the dominant crystal orientation changes from (100) to (111), grain boundarie… ▽ More We present a systematic study of the properties of TiN films by varying the deposition conditions in an ultra-high-vacuum reactive magnetron sputtering chamber. By increasing the deposition pressure from 2 to 9 mTorr while kee** a nearly stoichiometric composition of Ti(1-x)N(x) (x=0.5), the film resistivity increases, the dominant crystal orientation changes from (100) to (111), grain boundaries become clearer, and the strong compressive strain changes to weak tensile strain. The TiN films absorb a high concentration of contaminants including hydrogen, carbon, and oxygen when they are exposed to air after deposition. With the target-substrate distance set to 88 mm the contaminant levels increase from ~0.1% to ~10% as the pressure is increased from 2 to 9 mTorr. The contaminant concentrations also correlate with in-plane distance from the center of the substrate and increase by roughly two orders of magnitude as the target-substrate distance is increased from 88 mm to 266 mm. These contaminants are found to strongly influence the properties of TiN films. For instance, the resistivity of stoichiometric films increases by around a factor of 5 as the oxygen content increases from 0.1% to 11%. These results suggest that the sputtered TiN particle energy is critical in determining the TiN film properties, and that it is important to control this energy to obtain high-quality TiN films. Superconducting coplanar waveguide resonators made from a series of nearly stoichiometric films grown at pressures from 2 mTorr to 7 mTorr show an increase in intrinsic quality factor from ~10^4 to ~10^6 as the magnitude of the compressive strain decreases from nearly 3800 MPa to approximately 150 MPa and the oxygen content increases from 0.1% to 8%. The films with a higher oxygen content exhibit lower loss, but the nonuniformity of the oxygen incorporation hinders the use of sputtered TiN in larger circuits. △ Less

Submitted 10 June, 2013; originally announced June 2013.

Comments: 9 pages, 9 figures

Status of MUSIC, the MUltiwavelength Sub/millimeter Inductance Camera

Authors: Sunil R. Golwala, Clint Bockstiegel, Spencer Brugger, Nicole G. Czakon, Peter K. Day, Thomas P. Downes, Ran Duan, Jiansong Gao, Amandeep K. Gill, Jason Glenn, Matthew I. Hollister, Henry G. LeDuc, Philip R. Maloney, Benjamin A. Mazin, Sean G. McHugh, David Miller, Omid Noroozian, Hien T. Nguyen, Jack Sayers, James A. Schlaerth, Seth Siegel, Anastasios K. Vayonakis, Philip R. Wilson, Jonas Zmuidzinas

Abstract: We present the status of MUSIC, the MUltiwavelength Sub/millimeter Inductance Camera, a new instrument for the Caltech Submillimeter Observatory. MUSIC is designed to have a 14', diffraction-limited field-of-view instrumented with 2304 detectors in 576 spatial pixels and four spectral bands at 0.87, 1.04, 1.33, and 1.98 mm. MUSIC will be used to study dusty star-forming galaxies, galaxy clusters v… ▽ More We present the status of MUSIC, the MUltiwavelength Sub/millimeter Inductance Camera, a new instrument for the Caltech Submillimeter Observatory. MUSIC is designed to have a 14', diffraction-limited field-of-view instrumented with 2304 detectors in 576 spatial pixels and four spectral bands at 0.87, 1.04, 1.33, and 1.98 mm. MUSIC will be used to study dusty star-forming galaxies, galaxy clusters via the Sunyaev-Zeldovich effect, and star formation in our own and nearby galaxies. MUSIC uses broadband superconducting phased-array slot-dipole antennas to form beams, lumped-element on-chip bandpass filters to define spectral bands, and microwave kinetic inductance detectors to senseincoming light. The focal plane is fabricated in 8 tiles consisting of 72 spatial pixels each. It is coupled to the telescope via an ambient temperature ellipsoidal mirror and a cold reimaging lens. A cold Lyot stop sits at the image of the primary mirror formed by the ellipsoidal mirror. Dielectric and metal mesh filters are used to block thermal infrared and out-of-band radiation. The instrument uses a pulse tube cooler and 3He/3He/4He closed-cycle cooler to cool the focal plane to below 250 mK. A multilayer shield attenuates Earth's magnetic field. Each focal plane tile is read out by a single pair of coaxes and a HEMT amplifier. The readout system consists of 16 copies of custom-designed ADC/DAC and IF boards coupled to the CASPER ROACH platform. We focus on recent updates on the instrument design and results from the commissioning of the full camera in 2012. △ Less

Submitted 3 November, 2012; originally announced November 2012.

Comments: 21 pages, 11 figures, presented at SPIE Astronomical Telescopes and Instrumentation 2012

Journal ref: SPIE Conference Series 8452 (2012)

A titanium-nitride near-infrared kinetic inductance photon-counting detector and its anomalous electrodynamics

Authors: J. Gao, M. R. Visser, M. O. Sandberg, F. C. S. da Silva, S. W. Nam, D. P. Pappas, K. D. Irwin, D. S. Wisbey, E. Langman, S. R. Meeker, B. A. Mazin, H. G. Leduc, J. Zmuidzinas

Abstract: We demonstrate single-photon counting at 1550 nm with titanium-nitride (TiN) microwave kinetic inductance detectors. Energy resolution of 0.4 eV and arrival-time resolution of 1.2 microseconds are achieved. 0-, 1-, 2-photon events are resolved and shown to follow Poisson statistics. We find that the temperature-dependent frequency shift deviates from the Mattis-Bardeen theory, and the dissipation… ▽ More We demonstrate single-photon counting at 1550 nm with titanium-nitride (TiN) microwave kinetic inductance detectors. Energy resolution of 0.4 eV and arrival-time resolution of 1.2 microseconds are achieved. 0-, 1-, 2-photon events are resolved and shown to follow Poisson statistics. We find that the temperature-dependent frequency shift deviates from the Mattis-Bardeen theory, and the dissipation response shows a shorter decay time than the frequency response at low temperatures. We suggest that the observed anomalous electrodynamics may be related to quasiparticle traps or subgap states in the disordered TiN films. Finally, the electron density-of-states is derived from the pulse response. △ Less

Submitted 3 August, 2012; originally announced August 2012.

Comments: 4 pages, 3 figures

A readout for large arrays of Microwave Kinetic Inductance Detectors

Authors: Sean McHugh, Benjamin A. Mazin, Bruno Serfass, Seth Meeker, Kieran O'Brien, Ran Duan, Rick Raffanti, Dan Werthimer

Abstract: Microwave Kinetic Inductance Detectors (MKIDs) are superconducting detectors capable of counting single photons and measuring their energy in the UV, optical, and near-IR. MKIDs feature intrinsic frequency domain multiplexing (FDM) at microwave frequencies, allowing the construction and readout of large arrays. Due to the microwave FDM, MKIDs do not require the complex cryogenic multiplexing elect… ▽ More Microwave Kinetic Inductance Detectors (MKIDs) are superconducting detectors capable of counting single photons and measuring their energy in the UV, optical, and near-IR. MKIDs feature intrinsic frequency domain multiplexing (FDM) at microwave frequencies, allowing the construction and readout of large arrays. Due to the microwave FDM, MKIDs do not require the complex cryogenic multiplexing electronics used for similar detectors, such as Transition Edge Sensors (TESs), but instead transfer this complexity to room temperature electronics where they present a formidable signal processing challenge. In this paper we describe the first successful effort to build a readout for a photon counting optical/near-IR astronomical instrument, the ARray Camera for Optical to Near-infrared Spectrophotometry (ARCONS). This readout is based on open source hardware developed by the Collaboration for Astronomy Signal Processing and Electronics Research (CASPER). Designed principally for radio telescope backends, it is flexible enough to be used for a variety of signal processing applications. △ Less

Submitted 26 March, 2012; originally announced March 2012.

ARCONS: a highly multiplexed superconducting UV to near-IR camera

Authors: Kieran O'Brien, Benjamin A. Mazin, Sean McHugh, Seth Meeker, Bruce Bumble

Abstract: ARCONS, the Array Camera for Optical to Near-infrared Spectrophotometry, was recently commissioned at the Coude focus of the 200-inch Hale Telescope at the Palomar Observatory. At the heart of this unique instrument is a 1024-pixel Microwave Kinetic Inductance Detector (MKID), exploiting the Kinetic Inductance effect to measure the energy of the incoming photon to better than several percent. The… ▽ More ARCONS, the Array Camera for Optical to Near-infrared Spectrophotometry, was recently commissioned at the Coude focus of the 200-inch Hale Telescope at the Palomar Observatory. At the heart of this unique instrument is a 1024-pixel Microwave Kinetic Inductance Detector (MKID), exploiting the Kinetic Inductance effect to measure the energy of the incoming photon to better than several percent. The ground-breaking instrument is lens-coupled with a pixel scale of 0.23"/pixel, with each pixel recording the arrival time (<2 microsec) and energy of a photon (~10%) in the optical to near-IR (0.4-1.1 microns) range. The scientific objectives of the instrument include the rapid follow-up and classification of the transient phenomena. △ Less

Submitted 27 January, 2012; originally announced January 2012.

Comments: To appear in the proceedings of IAU symposium number 285; New Horizons in Time Domain Astronomy, eds. R.E.M Griffin, R. J. Hanisch & R. Seaman

A superconducting focal plane array for ultraviolet, optical, and near-infrared astrophysics

Authors: Benjamin A. Mazin, Bruce Bumble, Seth R. Meeker, Kieran O'Brien, Sean McHugh, Eric Langman

Abstract: Microwave Kinetic Inductance Detectors, or MKIDs, have proven to be a powerful cryogenic detector technology due to their sensitivity and the ease with which they can be multiplexed into large arrays. A MKID is an energy sensor based on a photon-variable superconducting inductance in a lithographed microresonator, and is capable of functioning as a photon detector across the electromagnetic spectr… ▽ More Microwave Kinetic Inductance Detectors, or MKIDs, have proven to be a powerful cryogenic detector technology due to their sensitivity and the ease with which they can be multiplexed into large arrays. A MKID is an energy sensor based on a photon-variable superconducting inductance in a lithographed microresonator, and is capable of functioning as a photon detector across the electromagnetic spectrum as well as a particle detector. Here we describe the first successful effort to create a photon-counting, energy-resolving ultraviolet, optical, and near infrared MKID focal plane array. These new Optical Lumped Element (OLE) MKID arrays have significant advantages over semiconductor detectors like charge coupled devices (CCDs). They can count individual photons with essentially no false counts and determine the energy and arrival time of every photon with good quantum efficiency. Their physical pixel size and maximum count rate is well matched with large telescopes. These capabilities enable powerful new astrophysical instruments usable from the ground and space. MKIDs could eventually supplant semiconductor detectors for most astronomical instrumentation, and will be useful for other disciplines such as quantum optics and biological imaging. △ Less

Submitted 30 November, 2011; originally announced December 2011.

Comments: 9 pages, 5 figures, accepted for publication in Optics Express

Journal ref: Optics Express, Vol. 20, Issue 2, pp. 1503-1511 (2012)

ARCONS: A highly multiplexed superconducting optical to near-IR camera

Authors: Benjamin A. Mazin, Kieran O'Brien, Sean McHugh, Bruce Bumble, David Moore, Sunil Golwala, Jonas Zmuidzinas

Abstract: We report on the development of ARCONS, the ARray Camera for Optical to Near-IR Spectrophotometry. This photon counting integral field unit (IFU), being built at UCSB and Caltech with detectors fabricated at JPL, will use a unique, highly multiplexed low temperature detector technology known as Microwave Kinetic Inductance Detectors (MKIDs). These detectors, which operate at 100 mK, should provide… ▽ More We report on the development of ARCONS, the ARray Camera for Optical to Near-IR Spectrophotometry. This photon counting integral field unit (IFU), being built at UCSB and Caltech with detectors fabricated at JPL, will use a unique, highly multiplexed low temperature detector technology known as Microwave Kinetic Inductance Detectors (MKIDs). These detectors, which operate at 100 mK, should provide photon counting with energy resolution of R = E/δE > 20 and time resolution of a microsecond, with a quantum efficiency of around 50%. We expect to field the instrument at the Palomar 200" telescope in the first quarter of 2011 with an array containing 1024 pixels in a 32x32 pixel form factor to yield a field of view of approximately 10x10 arcseconds. The bandwidth of the camera is limited by the rising sky count rate at longer wavelengths, but we anticipate a bandwidth of 0.35 to 1.35 μm will be achievable. A simple optical path and compact dewar utilizing a cryogen-free adiabatic demagnetization refridgerator (ADR) allows the camera to be deployed quickly at Naysmith or Coude foci at a variety of telescopes. A highly expandable software defined radio (SDR) readout that can scale up to much larger arrays has been developed. △ Less

Submitted 5 July, 2010; originally announced July 2010.

Comments: 10 pages, 5 figures. To appear in Proc. SPIE Astronomical Telescopes and Instrumentation, San Diego, 2010