Showing 1–13 of 13 results for author: Maxson, J M

Measurement of Spin-Polarized Photoemission from Wurtzite and Zinc-Blende Gallium Nitride Photocathodes

Authors: S. J. Levenson, M. B. Andorf, B. D. Dickensheets, I. V. Bazarov, A. Galdi, J. Encomendero, V. V. Protasenko, D. Jena, H. G. Xing, J. M. Maxson

Abstract: Spin-polarized photoemission from wurtzite and zinc-blende gallium nitride (GaN) photocathodes has been observed and measured for the first time. The p-doped GaN photocathodes were epitaxially grown and activated to negative electron affinity (NEA) with a cesium monolayer deposited on their surfaces. A field-retarding Mott polarimeter was used to measure the spin-polarization of electrons photoemi… ▽ More Spin-polarized photoemission from wurtzite and zinc-blende gallium nitride (GaN) photocathodes has been observed and measured for the first time. The p-doped GaN photocathodes were epitaxially grown and activated to negative electron affinity (NEA) with a cesium monolayer deposited on their surfaces. A field-retarding Mott polarimeter was used to measure the spin-polarization of electrons photoemitted from the top of the valence band. A spectral scan with a tunable optical parametric amplifier (OPA) constructed to provide low-bandwidth light revealed peak spin polarizations of 17% and 29% in the wurtzite and zinc-blende photocathodes, respectively. Zinc-blende GaN results are analyzed with a spin-polarization model accounting for experimental parameters used in the measurements, while possible mechanisms influencing the obtained spin polarization values of wurtzite GaN are discussed. △ Less

Submitted 7 May, 2024; originally announced May 2024.

Compensating slice emittance growth in high brightness photoinjectors using sacrificial charge

Authors: W. H. Li, A. C. Bartnik, A. Fukasawa, M. Kaemingk, G. Lawler, N. Majernik, J. B. Rosenzweig, J. M. Maxson

Abstract: Achieving maximum electron beam brightness in photoinjectors requires detailed control of the 3D bunch shape and precise tuning of the beam focusing. Even in state-of-the-art designs, slice emittance growth due to nonlinear space charge forces and partial nonlaminarity often remains non-negligible. In this work we introduce a new means to linearize the transverse slice phase space: a sacrificial p… ▽ More Achieving maximum electron beam brightness in photoinjectors requires detailed control of the 3D bunch shape and precise tuning of the beam focusing. Even in state-of-the-art designs, slice emittance growth due to nonlinear space charge forces and partial nonlaminarity often remains non-negligible. In this work we introduce a new means to linearize the transverse slice phase space: a sacrificial portion of the bunch's own charge distribution, formed into a wavebroken shock front by highly nonlinear space charge forces within the gun, whose downstream purpose is to dynamically linearize the desired bunch core. We show that linearization of an appropriately prepared bunch can be achieved via strongly nonlaminar focusing of the sacrificial shock front, while the inner core focuses laminarly. This leads to a natural spatial separation of the two distributions: a dense core surrounded by a diffuse halo of sacrificial charge that can be collimated. Multi-objective genetic algorithm optimizations of the ultra-compact x-ray free electron laser (UCXFEL) injector employ this concept, and we interpret it with an analytic model that agrees well with the simulations. In simulation we demonstrate a final bunch charge of 100 pC, peak current $\sim 30$ A, and a sacrificial charge of 150 pC (250 pC total emitted from cathode) with normalized emittance growth of $<20$ nm-rad due to space charge. This implies a maximum achievable brightness approximately an order of magnitude greater than existing FEL injector designs. △ Less

Submitted 9 April, 2024; originally announced April 2024.

Comments: 11 pages, 11 figures, submitted to PRAB

Atomically smooth films of CsSb: a chemically robust visible light photocathode

Authors: C. T. Parzyck, C. A. Pennington, W. J. I. DeBenedetti, J. Balajka, E. Echeverria, H. Paik, L. Moreschini, B. D. Faeth, C. Hu, J. K. Nangoi, V. Anil, T. A. Arias, M. A. Hines, D. G. Schlom, A. Galdi, K. M. Shen, J. M. Maxson

Abstract: Alkali antimonide semiconductor photocathodes provide a promising platform for the generation of high brightness electron beams, which are necessary for the development of cutting-edge probes including x-ray free electron lasers and ultrafast electron diffraction. However, to harness the intrinsic brightness limits in these compounds, extrinsic degrading factors, including surface roughness and co… ▽ More Alkali antimonide semiconductor photocathodes provide a promising platform for the generation of high brightness electron beams, which are necessary for the development of cutting-edge probes including x-ray free electron lasers and ultrafast electron diffraction. However, to harness the intrinsic brightness limits in these compounds, extrinsic degrading factors, including surface roughness and contamination, must be overcome. By exploring the growth of CsxSb thin films monitored by in situ electron diffraction, the conditions to reproducibly synthesize atomically smooth films of CsSb on 3C-SiC (100) and graphene coated TiO2 (110) substrates are identified, and detailed structural, morphological, and electronic characterization is presented. These films combine high quantum efficiency in the visible (up to 1.2% at 400 nm), an easily accessible photoemission threshold of 550 nm, low surface roughness (down to 600 pm on a 1 um scale), and a robustness against oxidation up to 15 times greater then Cs3Sb. These properties suggest that CsSb has the potential to operate as an alternative to Cs$_3$Sb in electron source applications where the demands of the vacuum environment might otherwise preclude the use of traditional alkali antimonides. △ Less

Submitted 31 May, 2023; originally announced May 2023.

Comments: 11 pages, 6 figures, 1 table

Journal ref: APL Mater. 11, 101125 (2023)

Four-Dimensional Emittance Measurements of Ultrafast Electron Diffraction Optics Corrected Up to Sextupole Order

Authors: M. Gordon, W. H. Li, M. B. Andorf, A. C. Bartnik, C. J. R. Duncan, M. Kaemingk, C. A. Pennington, I. V. Bazarov, Y. -K. Kim, J. M. Maxson

Abstract: Ultrafast electron diffraction (UED) is a technique in which short-pulse electron beams can probe the femtosecond-scale evolution of atomic structure in matter driven far from equilibrium. As an accelerator physics challenge, UED imposes stringent constraints on the brightness of the probe electron beam. The low normalized emittance employed in UED, often at the 10 nm scale and below, is particula… ▽ More Ultrafast electron diffraction (UED) is a technique in which short-pulse electron beams can probe the femtosecond-scale evolution of atomic structure in matter driven far from equilibrium. As an accelerator physics challenge, UED imposes stringent constraints on the brightness of the probe electron beam. The low normalized emittance employed in UED, often at the 10 nm scale and below, is particularly sensitive to both applied field aberrations and space charge effects. The role of aberrations is increasingly important in small probe systems that often feature multiple orders of magnitude variations in beam size during transport. In this work, we report the correction of normal quadrupole, skew quadrupole, and sextupole aberrations via dedicated corrector elements in an ultrafast electron micro-diffraction beamline. To do this, we generate precise 4-dimensional phase space maps of rf-compressed electron beams, and find excellent agreement with aberration-free space charge simulations. Finally, we discuss the role a probe-forming aperture can play in improving the brightness of bunches with appreciable space charge effects. △ Less

Submitted 27 July, 2022; originally announced July 2022.

Comments: 10 pages, 9 figures, submitted to Physical Review Accelerators and Beams

Multi-scale time-resolved electron diffraction: A case study in moiré materials

Authors: C. J. R. Duncan, M. Kaemingk, W. H. Li, M. B. Andorf, A. C. Bartnik, A. Galdi, M. Gordon, C. A. Pennington, I. V. Bazarov, H. J. Zeng, F. Liu, D. Luo, A. Sood, A. M. Lindenberg, M. W. Tate, D. A. Muller, J. Thom-Levy, S. M. Gruner, J. M. Maxson

Abstract: Ultrafast-optical-pump -- structural-probe measurements, including ultrafast electron and x-ray scattering, provide direct experimental access to the fundamental timescales of atomic motion, and are thus foundational techniques for studying matter out of equilibrium. High-performance detectors are needed in scattering experiments to obtain maximum scientific value from every probe particle. We dep… ▽ More Ultrafast-optical-pump -- structural-probe measurements, including ultrafast electron and x-ray scattering, provide direct experimental access to the fundamental timescales of atomic motion, and are thus foundational techniques for studying matter out of equilibrium. High-performance detectors are needed in scattering experiments to obtain maximum scientific value from every probe particle. We deploy a hybrid pixel array direct electron detector to perform ultrafast electron diffraction experiments on a WSe$_2$/MoSe$_2$ 2D heterobilayer, resolving the weak features of diffuse scattering and moiré superlattice structure without saturating the zero order peak. Enabled by the detector's high frame rate, we show that a chop** technique provides diffraction difference images with signal-to-noise at the shot noise limit. Finally, we demonstrate that a fast detector frame rate coupled with a high repetition rate probe can provide continuous time resolution from femtoseconds to seconds, enabling us to perform a scanning ultrafast electron diffraction experiment that maps thermal transport in WSe$_2$/MoSe$_2$ and resolves distinct diffusion mechanisms in space and time. △ Less

Submitted 27 July, 2023; v1 submitted 16 June, 2022; originally announced June 2022.

Comments: Submitted manuscript, 22 pages, 5 figures

Ab initio study of the crystal and electronic structure of mono- and bi-alkali antimonides: Stability, Goldschmidt-like tolerance factors, and optical properties

Authors: J. K. Nangoi, M. Gaowei, A. Galdi, J. M. Maxson, S. Karkare, J. Smedley, T. A. Arias

Abstract: Mono- and bi-alkali antimonides, X$_2$YSb (X and Y from Group I), are promising for next-generation electron emitters due to their capability of producing high-quality electron beams. However, these materials are not yet well understood, in part due to the technical challenges in growing pure, ordered alkali antimonides. For example, in the current literature there is a lack of complete understand… ▽ More Mono- and bi-alkali antimonides, X$_2$YSb (X and Y from Group I), are promising for next-generation electron emitters due to their capability of producing high-quality electron beams. However, these materials are not yet well understood, in part due to the technical challenges in growing pure, ordered alkali antimonides. For example, in the current literature there is a lack of complete understanding of the mechanically stable crystal structures of these materials. As a first step towards understanding this issue, this paper presents an ab initio study of stability of single-crystal mono- and bi-alkali antimonides in the $D0_3$ structure, the structure generally assumed in the literature for these materials. Finding that many of these materials actually are unstable in the $D0_3$ structure, we formulate a new set of Goldschmidt-like tolerance factors that accurately predict $D0_3$ stability using a procedure analogous to machine-learning perceptron-based analysis. Next, we consider possible stable structures for materials that we predict to be unstable in the $D0_3$ structure. Taking as examples the mono- and bi-alkali antimonides Cs$_3$Sb and Cs$_2$KSb, which also are technologically interesting for photoemission and photoabsorption applications, respectively, we note that the most unstable phonon displacements are consistent with the cubic structure, and we therefore perform extensive ab initio searches to identify potential ground-state structures in a cubic lattice. Our X-ray diffraction experiments confirm that indeed these two materials are not stable in the $D0_3$ structure and show scattering that is consistent with our new, proposed stable structures. Finally, we explore ab initio the implications of the breaking of the $D0_3$ symmetry on the electronic structure, showing significant impact on the location of the optical absorption edge. △ Less

Submitted 27 May, 2022; originally announced May 2022.

Comments: Submitted to Physical Review Materials

A single-crystal alkali antimonide photocathode: high efficiency in the ultra-thin limit

Authors: C. T. Parzyck, A. Galdi, J. K. Nangoi, W. J. I. DeBenedetti, J. Balajka, B. D. Faeth, H. Paik, C. Hu, T. A. Arias, M. A. Hines, D. G. Schlom, K. M. Shen, J. M. Maxson

Abstract: The properties of photoemission electron sources determine the ultimate performance of a wide class of electron accelerators and photon detectors. To date, all high-efficiency visible-light photocathode materials are either polycrystalline or exhibit intrinsic surface disorder, both of which limit emitted electron beam brightness. In this letter we demonstrate the synthesis of epitaxial thin films… ▽ More The properties of photoemission electron sources determine the ultimate performance of a wide class of electron accelerators and photon detectors. To date, all high-efficiency visible-light photocathode materials are either polycrystalline or exhibit intrinsic surface disorder, both of which limit emitted electron beam brightness. In this letter we demonstrate the synthesis of epitaxial thin films of Cs$_3$Sb on 3C-SiC (001) using molecular-beam epitaxy. Films as thin as 4 nm have quantum efficiencies exceeding 2\% at 532 nm. We also find that epitaxial films have an order of magnitude larger quantum efficiency at 650 nm than comparable polycrystalline films on Si. Additionally, these films permit angle-resolved photoemission spectroscopy measurements of the electronic structure, which are found to be in good agreement with theory. Epitaxial films open the door to dramatic brightness enhancements via increased efficiency near threshold, reduced surface disorder, and the possibility of engineering new photoemission functionality at the level of single atomic layers. △ Less

Submitted 28 December, 2021; originally announced December 2021.

Comments: Submitted Manuscript: 8 pages, 4 figures

A kiloelectron-volt ultrafast electron micro-diffraction apparatus using low emittance semiconductor photocathodes

Authors: W. H. Li, C. J. R. Duncan, M. B. Andorf, A. C. Bartnik, E. Bianco, L. Cultrera, A. Galdi, M. Gordon, M. Kaemingk, C. A. Pennington, L. F. Kourkoutis, I. V. Bazarov, J. M. Maxson

Abstract: We report the design and performance of a time-resolved electron diffraction apparatus capable of producing intense bunches with simultaneously single digit micron probe size, long coherence length, and $200$ fs rms time resolution. We measure the 5d (peak) beam brightness at the sample location in micro-diffraction mode to be $7 \times 10^{13} \ \mathrm{A}/\text{m}^2\text{-rad}^2$. To generate hi… ▽ More We report the design and performance of a time-resolved electron diffraction apparatus capable of producing intense bunches with simultaneously single digit micron probe size, long coherence length, and $200$ fs rms time resolution. We measure the 5d (peak) beam brightness at the sample location in micro-diffraction mode to be $7 \times 10^{13} \ \mathrm{A}/\text{m}^2\text{-rad}^2$. To generate high brightness electron bunches, the system employs high efficiency, low emittance semiconductor photocathodes driven with a wavelength near the photoemission threshold at a repetition rate up to 250 kHz. We characterize spatial, temporal, and reciprocal space resolution of the apparatus. We perform proof-of-principle measurements of ultrafast heating in single crystal Au samples and compare experimental results with simulations that account for the effects of multiple-scattering. △ Less

Submitted 2 February, 2022; v1 submitted 15 November, 2021; originally announced November 2021.

Comments: 13 pages, 10 figures, submitted to Structural Dynamics

Simulation of the transit-time optical stochastic cooling process in the Cornell Electron Storage Ring

Authors: S. T. Wang, M. B. Andorf, I. V. Bazarov, W. F. Bergan, V. Khachatryan, J. M. Maxson, D. L. Rubin

Abstract: In preparation for a demonstration of optical stochastic cooling in the Cornell Electron Storage Ring (CESR) we have developed a particle tracking simulation to study the relevant beam dynamics. Optical radiation emitted in the pickup undulator gives a momentum kick to that same particle in the kicker undulator. The optics of the electron bypass from pickup to kicker couples betatron amplitude and… ▽ More In preparation for a demonstration of optical stochastic cooling in the Cornell Electron Storage Ring (CESR) we have developed a particle tracking simulation to study the relevant beam dynamics. Optical radiation emitted in the pickup undulator gives a momentum kick to that same particle in the kicker undulator. The optics of the electron bypass from pickup to kicker couples betatron amplitude and momentum offset to path length so that the momentum kick reduces emittance and momentum spread. Nearby electrons contribute an incoherent noise. Layout of the bypass line is presented that accommodates optics with a range of transverse and longitudinal cooling parameters. The simulation is used to determine cooling rates and their dependence on bunch and lattice parameters for bypass optics with distinct emittance and momentum acceptance. △ Less

Submitted 24 June, 2021; v1 submitted 30 March, 2021; originally announced March 2021.

Journal ref: Phys. Rev. Accel. Beams 24, 064001 (2021)

Optical Stochastic Cooling with an Arc-Bypass in CESR

Authors: M. B. Andorf, W. F. Bergan, I. V. Bazarov, J. M. Maxson, V. Khachatryan, D. L. Rubin, S. T. Wang

Abstract: A proposed experiment to demonstrate Optical Stochastic Cooling (OSC) in the Cornell Electron Storage Ring (CESR) based on an arc-bypass design is presented. This arc-bypass provides significantly longer optical delay than the dog-leg style chicane, opening up the possibility of a multi-pass or staged optical amplifier that can achieve the gains required for effective cooling of hadron or heavy-io… ▽ More A proposed experiment to demonstrate Optical Stochastic Cooling (OSC) in the Cornell Electron Storage Ring (CESR) based on an arc-bypass design is presented. This arc-bypass provides significantly longer optical delay than the dog-leg style chicane, opening up the possibility of a multi-pass or staged optical amplifier that can achieve the gains required for effective cooling of hadron or heavy-ions. Beyond introducing the arc-bypass, in this paper we study the stability requirements for the dipoles comprising it and investigate the use of an optical feedback system to relax the dipole and light-path stability tolerances. △ Less

Submitted 5 October, 2020; v1 submitted 26 July, 2020; originally announced July 2020.

Journal ref: Phys. Rev. Accel. Beams 23, 102801 (2020)

The Role of Low Intrinsic Emittance in Modern Photoinjector Brightness

Authors: Christopher M. Pierce, Matthew B. Andorf, Edmond Lu, Matthew Gordon, Young-Kee Kim, Colwyn Gulliford, Ivan V. Bazarov, Jared M. Maxson, Nora P. Norvell, Bruce M. Dunham, Tor O. Raubenheimer

Abstract: Reducing the intrinsic emittance of photocathodes is one of the most promising routes to improving the brightness of electron sources. However, when emittance growth occurs during beam transport (for example, due to space-charge), it is possible that this emittance growth overwhelms the contribution of the photocathode and, thus, in this case source emittance improvements are not beneficial. Using… ▽ More Reducing the intrinsic emittance of photocathodes is one of the most promising routes to improving the brightness of electron sources. However, when emittance growth occurs during beam transport (for example, due to space-charge), it is possible that this emittance growth overwhelms the contribution of the photocathode and, thus, in this case source emittance improvements are not beneficial. Using multi-objective genetic optimization, we investigate the role intrinsic emittance plays in determining the final emittance of several space-charge dominated photoinjectors, including those for high repetition rate free electron lasers and ultrafast electron diffraction. We introduce a new metric to predict the scale of photocathode emittance improvements that remain beneficial and explain how additional tuning is required to take full advantage of new photocathode technologies. Additionally, we determine the scale of emittance growth due to point-to-point Coulomb interactions with a fast tree-based space-charge solver. Our results show that in the realistic high brightness photoinjector applications under study, the reduction of thermal emittance to values as low as 50 pm/um (1 meV MTE) remains a viable option for the improvement of beam brightness. △ Less

Submitted 16 April, 2020; originally announced April 2020.

Comments: 12 pages, 7 figures

Journal ref: Phys. Rev. Accel. Beams 23, 070101 (2020)

Lossless monochromation for electron microscopy with pulsed photoemission sources and rf cavities

Authors: Cameron J. R. Duncan, David A. Muller, Jared M. Maxson

Abstract: Resonant radiofrequency cavities enable exquisite time-energy control of electron beams when synchronized with laser driven photoemission. We present a lossless monochromator design that exploits this fine control in the one-electron-per-pulse regime. The theoretically achievable maximum beam current on target is orders of magnitude greater than state-of-the-art monochromators for the same spatial… ▽ More Resonant radiofrequency cavities enable exquisite time-energy control of electron beams when synchronized with laser driven photoemission. We present a lossless monochromator design that exploits this fine control in the one-electron-per-pulse regime. The theoretically achievable maximum beam current on target is orders of magnitude greater than state-of-the-art monochromators for the same spatial and energy resolution. This improvement is the result of monochromating in the time domain, unconstrained by the transverse brightness of the electron source. We show analytically and confirm numerically that cavity parameters chosen to minimize energy spread perform the additional function of undoing the appreciable effect of chromatic aberration in the upstream optics. We argue that our design has significant applications in both ultra-fast and non-time-resolved microscopy, provided photoelectron sources of sufficiently small size and laser sources of sufficiently high repetition rate. Our design achieves in simulations more than two orders of magnitude reduction in beam energy spread, down to single digit meV. Overcoming the minimum probe-size limit that chromatic aberration imposes, our design clears a path for high-current, high-resolution electron beam applications at primary energies from single to hundreds of keV. △ Less

Submitted 5 January, 2021; v1 submitted 25 February, 2020; originally announced February 2020.

Journal ref: Phys. Rev. Applied 14, 014060 (2020)

Comparison of DC and SRF Photoemission Guns For High Brightness High Average Current Beam Production

Authors: Ivan V. Bazarov, Allen Kim, Manu N. Lakshmanan, Jared M. Maxson

Abstract: A comparison of the two most prominent electron sources of high average current high brightness electron beams, DC and superconducting RF photoemission guns, is carried out using a large-scale multivariate genetic optimizer interfaced with space charge simulation codes. The gun geometry for each case is varied concurrently with laser pulse shape and parameters of the downstream beamline elements o… ▽ More A comparison of the two most prominent electron sources of high average current high brightness electron beams, DC and superconducting RF photoemission guns, is carried out using a large-scale multivariate genetic optimizer interfaced with space charge simulation codes. The gun geometry for each case is varied concurrently with laser pulse shape and parameters of the downstream beamline elements of the photoinjector to obtain minimum emittance as a function of bunch charge. Realistic constraints are imposed on maximum field values for the two gun types. The SRF and DC gun emittances and beam envelopes are compared for various values of photocathode thermal emittance. The performance of the two systems is found to be largely comparable provided low intrinsic emittance photocathodes can be employed. △ Less

Submitted 28 March, 2011; v1 submitted 26 March, 2011; originally announced March 2011.

Journal ref: Phys.Rev.ST Accel.Beams 14:072001,2011