-
Harnessing Plasmonic Interference for Nanoscale Ultrafast Electron Sources
Authors:
Alimohammed Kachwala,
Mansoure Moeini Rizi,
Christopher M Pierce,
Daniele Filippetto,
Jared Maxson,
Siddharth Karkare
Abstract:
In this paper we demonstrate the use of plasmonic focusing in conjunction with non-linear photoemisison to develop geometrically flat nanoscale electron sources with less than 40 pm-rad root mean squared (rms) normalized transverse emittance. Circularly polarized light is incident on a gold Archimedean spiral structure to generate surface-plasmon-polaritons which interfere coherently at the center…
▽ More
In this paper we demonstrate the use of plasmonic focusing in conjunction with non-linear photoemisison to develop geometrically flat nanoscale electron sources with less than 40 pm-rad root mean squared (rms) normalized transverse emittance. Circularly polarized light is incident on a gold Archimedean spiral structure to generate surface-plasmon-polaritons which interfere coherently at the center resulting in a 50 nm rms emisison area. Such a nanostructured flat surface enables simultaneous spatio-temporal confinement of emitted electrons at the nanometer and femtosecond level and can be used as an advanced electron source for high-repetition-rate ultrafast electron diffraction and microscopy experiments as well as next-generation of miniaturized particle accelerators.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
Measurement of Spin-Polarized Photoemission from Wurtzite and Zinc-Blende Gallium Nitride Photocathodes
Authors:
S. J. Levenson,
M. B. Andorf,
B. D. Dickensheets,
I. V. Bazarov,
A. Galdi,
J. Encomendero,
V. V. Protasenko,
D. Jena,
H. G. Xing,
J. M. Maxson
Abstract:
Spin-polarized photoemission from wurtzite and zinc-blende gallium nitride (GaN) photocathodes has been observed and measured for the first time. The p-doped GaN photocathodes were epitaxially grown and activated to negative electron affinity (NEA) with a cesium monolayer deposited on their surfaces. A field-retarding Mott polarimeter was used to measure the spin-polarization of electrons photoemi…
▽ More
Spin-polarized photoemission from wurtzite and zinc-blende gallium nitride (GaN) photocathodes has been observed and measured for the first time. The p-doped GaN photocathodes were epitaxially grown and activated to negative electron affinity (NEA) with a cesium monolayer deposited on their surfaces. A field-retarding Mott polarimeter was used to measure the spin-polarization of electrons photoemitted from the top of the valence band. A spectral scan with a tunable optical parametric amplifier (OPA) constructed to provide low-bandwidth light revealed peak spin polarizations of 17% and 29% in the wurtzite and zinc-blende photocathodes, respectively. Zinc-blende GaN results are analyzed with a spin-polarization model accounting for experimental parameters used in the measurements, while possible mechanisms influencing the obtained spin polarization values of wurtzite GaN are discussed.
△ Less
Submitted 7 May, 2024;
originally announced May 2024.
-
Compensating slice emittance growth in high brightness photoinjectors using sacrificial charge
Authors:
W. H. Li,
A. C. Bartnik,
A. Fukasawa,
M. Kaemingk,
G. Lawler,
N. Majernik,
J. B. Rosenzweig,
J. M. Maxson
Abstract:
Achieving maximum electron beam brightness in photoinjectors requires detailed control of the 3D bunch shape and precise tuning of the beam focusing. Even in state-of-the-art designs, slice emittance growth due to nonlinear space charge forces and partial nonlaminarity often remains non-negligible. In this work we introduce a new means to linearize the transverse slice phase space: a sacrificial p…
▽ More
Achieving maximum electron beam brightness in photoinjectors requires detailed control of the 3D bunch shape and precise tuning of the beam focusing. Even in state-of-the-art designs, slice emittance growth due to nonlinear space charge forces and partial nonlaminarity often remains non-negligible. In this work we introduce a new means to linearize the transverse slice phase space: a sacrificial portion of the bunch's own charge distribution, formed into a wavebroken shock front by highly nonlinear space charge forces within the gun, whose downstream purpose is to dynamically linearize the desired bunch core. We show that linearization of an appropriately prepared bunch can be achieved via strongly nonlaminar focusing of the sacrificial shock front, while the inner core focuses laminarly. This leads to a natural spatial separation of the two distributions: a dense core surrounded by a diffuse halo of sacrificial charge that can be collimated. Multi-objective genetic algorithm optimizations of the ultra-compact x-ray free electron laser (UCXFEL) injector employ this concept, and we interpret it with an analytic model that agrees well with the simulations. In simulation we demonstrate a final bunch charge of 100 pC, peak current $\sim 30$ A, and a sacrificial charge of 150 pC (250 pC total emitted from cathode) with normalized emittance growth of $<20$ nm-rad due to space charge. This implies a maximum achievable brightness approximately an order of magnitude greater than existing FEL injector designs.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
Towards construction of a novel nm resolution MeV-STEM for imaging of thick biological samples
Authors:
X. Yang,
L. Wang,
J. Maxson,
A. Bartnik,
M. Kaemingk,
W. Wan,
L. Cultrera,
L. Wu,
V. Smaluk,
T. Shaftan,
S. McSweeney,
C. **g,
R. Kostin,
Y. Zhu
Abstract:
Driven by life-science applications, mega-electron-volt Scanning Transmission Electron Microscope (MeV-STEM) has been proposed to image thick biological samples. The high penetration of inelastic scattering signals of MeV electrons could make the MeV-STEM an appropriate microscope for biological samples as thick as 10 μm or more with a nanoscale resolution, considering the effect of electron energ…
▽ More
Driven by life-science applications, mega-electron-volt Scanning Transmission Electron Microscope (MeV-STEM) has been proposed to image thick biological samples. The high penetration of inelastic scattering signals of MeV electrons could make the MeV-STEM an appropriate microscope for biological samples as thick as 10 μm or more with a nanoscale resolution, considering the effect of electron energy, beam broadening and low-dose limit on resolution. The best resolution is inversely related to the sample thickness and changes from 6 nm to 24 nm when the sample thickness increases from 1 μm to 10 μm. To achieve such a resolution in STEM, the imaging electrons must be focused on the specimen with a nm size and a mrad semi-convergence angle. This requires an electron beam emittance of a few picometer, which is ~1,000 times smaller than the presently achieved nm emittance, in conjunction with less than 10-4 energy spread and 1 nA current. We numerically simulated two different approaches that are potentially applicable to build a compact MeV-STEM instrument: 1) DC gun, aperture, Superconducting radio frequency (SRF) cavities, and STEM column; 2) SRF gun, aperture, SRF cavities, and STEM column. Beam dynamic simulations show promising results, which meet the needs of an MeV-STEM, a few picometer emittance, less than 10-4 energy spread, and 0.1-1 nA current from both options. Also, we designed a compact STEM column based on permanent quadrupole quintuplet not only to demagnify the beam size from 1 μm at the source point to 2 nm at the specimen, but also to provide the freedom of changing the magnifications at the specimen and a scanning system to raster the electron beam across the sample with a step size of 2 nm and the repetition rate of 1 MHz. This makes it possible to build a compact MeV-STEM and use it to study thick, large-volume samples in cell biology.
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
-
Atomically smooth films of CsSb: a chemically robust visible light photocathode
Authors:
C. T. Parzyck,
C. A. Pennington,
W. J. I. DeBenedetti,
J. Balajka,
E. Echeverria,
H. Paik,
L. Moreschini,
B. D. Faeth,
C. Hu,
J. K. Nangoi,
V. Anil,
T. A. Arias,
M. A. Hines,
D. G. Schlom,
A. Galdi,
K. M. Shen,
J. M. Maxson
Abstract:
Alkali antimonide semiconductor photocathodes provide a promising platform for the generation of high brightness electron beams, which are necessary for the development of cutting-edge probes including x-ray free electron lasers and ultrafast electron diffraction. However, to harness the intrinsic brightness limits in these compounds, extrinsic degrading factors, including surface roughness and co…
▽ More
Alkali antimonide semiconductor photocathodes provide a promising platform for the generation of high brightness electron beams, which are necessary for the development of cutting-edge probes including x-ray free electron lasers and ultrafast electron diffraction. However, to harness the intrinsic brightness limits in these compounds, extrinsic degrading factors, including surface roughness and contamination, must be overcome. By exploring the growth of CsxSb thin films monitored by in situ electron diffraction, the conditions to reproducibly synthesize atomically smooth films of CsSb on 3C-SiC (100) and graphene coated TiO2 (110) substrates are identified, and detailed structural, morphological, and electronic characterization is presented. These films combine high quantum efficiency in the visible (up to 1.2% at 400 nm), an easily accessible photoemission threshold of 550 nm, low surface roughness (down to 600 pm on a 1 um scale), and a robustness against oxidation up to 15 times greater then Cs3Sb. These properties suggest that CsSb has the potential to operate as an alternative to Cs$_3$Sb in electron source applications where the demands of the vacuum environment might otherwise preclude the use of traditional alkali antimonides.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
Experimental characterization of photoemission from plasmonic nanogroove arrays
Authors:
Christopher M. Pierce,
Daniel B. Durham,
Fabrizio Riminucci,
Scott Dhuey,
Ivan Bazarov,
Jared Maxson,
Andrew M. Minor,
Daniele Filippetto
Abstract:
Metal photocathodes are an important source of high-brightness electron beams, ubiquitous in the operation of both large-scale accelerators and table-top microscopes. When the surface of a metal is nano-engineered with patterns on the order of the optical wavelength, it can lead to the excitation and confinement of surface plasmon polariton waves which drive nonlinear photoemission. In this work,…
▽ More
Metal photocathodes are an important source of high-brightness electron beams, ubiquitous in the operation of both large-scale accelerators and table-top microscopes. When the surface of a metal is nano-engineered with patterns on the order of the optical wavelength, it can lead to the excitation and confinement of surface plasmon polariton waves which drive nonlinear photoemission. In this work, we aim to evaluate gold plasmonic nanogrooves as a concept for producing bright electron beams for accelerators via nonlinear photoemission. We do this by first comparing their optical properties to numerical calculations from first principles to confirm our ability to fabricate these nanoscale structures. Their nonlinear photoemission yield is found by measuring emitted photocurrent as the intensity of their driving laser is varied. Finally, the mean transverse energy of this electron source is found using the solenoid scan technique. Our data demonstrate the ability of these cathodes to provide a tenfold enhancement in the efficiency of photoemission over flat metals driven with a linear process. We find that these cathodes are robust and capable of reaching sustained average currents over 100 nA at optical intensities larger than 2 GW/cm$^2$ with no degradation of performance. The emittance of the generated beam is found to be highly asymmetric, a fact we can explain with calculations involving the also asymmetric roughness of the patterned surface. These results demonstrate the use of nano-engineered surfaces as enhanced photocathodes, providing a robust, air-stable source of high average current electron beams with great potential for industrial and scientific applications.
△ Less
Submitted 14 March, 2023; v1 submitted 10 October, 2022;
originally announced October 2022.
-
Four-Dimensional Emittance Measurements of Ultrafast Electron Diffraction Optics Corrected Up to Sextupole Order
Authors:
M. Gordon,
W. H. Li,
M. B. Andorf,
A. C. Bartnik,
C. J. R. Duncan,
M. Kaemingk,
C. A. Pennington,
I. V. Bazarov,
Y. -K. Kim,
J. M. Maxson
Abstract:
Ultrafast electron diffraction (UED) is a technique in which short-pulse electron beams can probe the femtosecond-scale evolution of atomic structure in matter driven far from equilibrium. As an accelerator physics challenge, UED imposes stringent constraints on the brightness of the probe electron beam. The low normalized emittance employed in UED, often at the 10 nm scale and below, is particula…
▽ More
Ultrafast electron diffraction (UED) is a technique in which short-pulse electron beams can probe the femtosecond-scale evolution of atomic structure in matter driven far from equilibrium. As an accelerator physics challenge, UED imposes stringent constraints on the brightness of the probe electron beam. The low normalized emittance employed in UED, often at the 10 nm scale and below, is particularly sensitive to both applied field aberrations and space charge effects. The role of aberrations is increasingly important in small probe systems that often feature multiple orders of magnitude variations in beam size during transport. In this work, we report the correction of normal quadrupole, skew quadrupole, and sextupole aberrations via dedicated corrector elements in an ultrafast electron micro-diffraction beamline. To do this, we generate precise 4-dimensional phase space maps of rf-compressed electron beams, and find excellent agreement with aberration-free space charge simulations. Finally, we discuss the role a probe-forming aperture can play in improving the brightness of bunches with appreciable space charge effects.
△ Less
Submitted 27 July, 2022;
originally announced July 2022.
-
Multi-scale time-resolved electron diffraction: A case study in moiré materials
Authors:
C. J. R. Duncan,
M. Kaemingk,
W. H. Li,
M. B. Andorf,
A. C. Bartnik,
A. Galdi,
M. Gordon,
C. A. Pennington,
I. V. Bazarov,
H. J. Zeng,
F. Liu,
D. Luo,
A. Sood,
A. M. Lindenberg,
M. W. Tate,
D. A. Muller,
J. Thom-Levy,
S. M. Gruner,
J. M. Maxson
Abstract:
Ultrafast-optical-pump -- structural-probe measurements, including ultrafast electron and x-ray scattering, provide direct experimental access to the fundamental timescales of atomic motion, and are thus foundational techniques for studying matter out of equilibrium. High-performance detectors are needed in scattering experiments to obtain maximum scientific value from every probe particle. We dep…
▽ More
Ultrafast-optical-pump -- structural-probe measurements, including ultrafast electron and x-ray scattering, provide direct experimental access to the fundamental timescales of atomic motion, and are thus foundational techniques for studying matter out of equilibrium. High-performance detectors are needed in scattering experiments to obtain maximum scientific value from every probe particle. We deploy a hybrid pixel array direct electron detector to perform ultrafast electron diffraction experiments on a WSe$_2$/MoSe$_2$ 2D heterobilayer, resolving the weak features of diffuse scattering and moiré superlattice structure without saturating the zero order peak. Enabled by the detector's high frame rate, we show that a chop** technique provides diffraction difference images with signal-to-noise at the shot noise limit. Finally, we demonstrate that a fast detector frame rate coupled with a high repetition rate probe can provide continuous time resolution from femtoseconds to seconds, enabling us to perform a scanning ultrafast electron diffraction experiment that maps thermal transport in WSe$_2$/MoSe$_2$ and resolves distinct diffusion mechanisms in space and time.
△ Less
Submitted 27 July, 2023; v1 submitted 16 June, 2022;
originally announced June 2022.
-
Ab initio study of the crystal and electronic structure of mono- and bi-alkali antimonides: Stability, Goldschmidt-like tolerance factors, and optical properties
Authors:
J. K. Nangoi,
M. Gaowei,
A. Galdi,
J. M. Maxson,
S. Karkare,
J. Smedley,
T. A. Arias
Abstract:
Mono- and bi-alkali antimonides, X$_2$YSb (X and Y from Group I), are promising for next-generation electron emitters due to their capability of producing high-quality electron beams. However, these materials are not yet well understood, in part due to the technical challenges in growing pure, ordered alkali antimonides. For example, in the current literature there is a lack of complete understand…
▽ More
Mono- and bi-alkali antimonides, X$_2$YSb (X and Y from Group I), are promising for next-generation electron emitters due to their capability of producing high-quality electron beams. However, these materials are not yet well understood, in part due to the technical challenges in growing pure, ordered alkali antimonides. For example, in the current literature there is a lack of complete understanding of the mechanically stable crystal structures of these materials. As a first step towards understanding this issue, this paper presents an ab initio study of stability of single-crystal mono- and bi-alkali antimonides in the $D0_3$ structure, the structure generally assumed in the literature for these materials. Finding that many of these materials actually are unstable in the $D0_3$ structure, we formulate a new set of Goldschmidt-like tolerance factors that accurately predict $D0_3$ stability using a procedure analogous to machine-learning perceptron-based analysis. Next, we consider possible stable structures for materials that we predict to be unstable in the $D0_3$ structure. Taking as examples the mono- and bi-alkali antimonides Cs$_3$Sb and Cs$_2$KSb, which also are technologically interesting for photoemission and photoabsorption applications, respectively, we note that the most unstable phonon displacements are consistent with the cubic structure, and we therefore perform extensive ab initio searches to identify potential ground-state structures in a cubic lattice. Our X-ray diffraction experiments confirm that indeed these two materials are not stable in the $D0_3$ structure and show scattering that is consistent with our new, proposed stable structures. Finally, we explore ab initio the implications of the breaking of the $D0_3$ symmetry on the electronic structure, showing significant impact on the location of the optical absorption edge.
△ Less
Submitted 27 May, 2022;
originally announced May 2022.
-
Operation of Cs-Sb-O activated GaAs in a high voltage DC electron gun at high average current
Authors:
Jai Kwan Bae,
Matthew Andorf,
Adam Bartnik,
Alice Galdi,
Luca Cultrera,
Jared Maxson,
Ivan Bazarov
Abstract:
Negative Electron Affinity (NEA) activated GaAs photocathodes are the most popular option for generating a high current (> 1 mA) spin-polarized electron beam. Despite its popularity, a short operational lifetime is the main drawback of this material. Recent works have shown that the lifetime can be improved by using a robust Cs-Sb-O NEA layer with minimal adverse effects. In this work, we operate…
▽ More
Negative Electron Affinity (NEA) activated GaAs photocathodes are the most popular option for generating a high current (> 1 mA) spin-polarized electron beam. Despite its popularity, a short operational lifetime is the main drawback of this material. Recent works have shown that the lifetime can be improved by using a robust Cs-Sb-O NEA layer with minimal adverse effects. In this work, we operate GaAs photocathodes with this new activation method in a high voltage environment to extract a high current. We observed spectral dependence on the lifetime improvement. In particular, we saw a 45% increase in the lifetime at 780 nm for Cs-Sb-O activated GaAs compared to Cs-O activated GaAs.
△ Less
Submitted 26 May, 2022;
originally announced May 2022.
-
C$^3$ Demonstration Research and Development Plan
Authors:
Emilio A. Nanni,
Martin Breidenbach,
Caterina Vernieri,
Sergey Belomestnykh,
Pushpalatha Bhat,
Sergei Nagaitsev,
Mei Bai,
William Berg,
Tim Barklow,
John Byrd,
Ankur Dhar,
Ram C. Dhuley,
Chris Doss,
Joseph Duris,
Auralee Edelen,
Claudio Emma,
Josef Frisch,
Annika Gabriel,
Spencer Gessner,
Carsten Hast,
Chunguang **g,
Arkadiy Klebaner,
Anatoly K. Krasnykh,
John Lewellen,
Matthias Liepe
, et al. (25 additional authors not shown)
Abstract:
C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced stat…
▽ More
C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C$^3$ is the main linac. This white paper presents the staged approach towards a facility to demonstrate C$^3$ technology with both Direct (source and main linac) and Parallel (beam delivery, dam** ring, ancillary component) R&D. The white paper also includes discussion on the approach for technology industrialization, related HEP R&D activities that are enabled by C$^3$ R&D, infrastructure requirements and siting options.
△ Less
Submitted 6 July, 2022; v1 submitted 17 March, 2022;
originally announced March 2022.
-
A single-crystal alkali antimonide photocathode: high efficiency in the ultra-thin limit
Authors:
C. T. Parzyck,
A. Galdi,
J. K. Nangoi,
W. J. I. DeBenedetti,
J. Balajka,
B. D. Faeth,
H. Paik,
C. Hu,
T. A. Arias,
M. A. Hines,
D. G. Schlom,
K. M. Shen,
J. M. Maxson
Abstract:
The properties of photoemission electron sources determine the ultimate performance of a wide class of electron accelerators and photon detectors. To date, all high-efficiency visible-light photocathode materials are either polycrystalline or exhibit intrinsic surface disorder, both of which limit emitted electron beam brightness. In this letter we demonstrate the synthesis of epitaxial thin films…
▽ More
The properties of photoemission electron sources determine the ultimate performance of a wide class of electron accelerators and photon detectors. To date, all high-efficiency visible-light photocathode materials are either polycrystalline or exhibit intrinsic surface disorder, both of which limit emitted electron beam brightness. In this letter we demonstrate the synthesis of epitaxial thin films of Cs$_3$Sb on 3C-SiC (001) using molecular-beam epitaxy. Films as thin as 4 nm have quantum efficiencies exceeding 2\% at 532 nm. We also find that epitaxial films have an order of magnitude larger quantum efficiency at 650 nm than comparable polycrystalline films on Si. Additionally, these films permit angle-resolved photoemission spectroscopy measurements of the electronic structure, which are found to be in good agreement with theory. Epitaxial films open the door to dramatic brightness enhancements via increased efficiency near threshold, reduced surface disorder, and the possibility of engineering new photoemission functionality at the level of single atomic layers.
△ Less
Submitted 28 December, 2021;
originally announced December 2021.
-
A kiloelectron-volt ultrafast electron micro-diffraction apparatus using low emittance semiconductor photocathodes
Authors:
W. H. Li,
C. J. R. Duncan,
M. B. Andorf,
A. C. Bartnik,
E. Bianco,
L. Cultrera,
A. Galdi,
M. Gordon,
M. Kaemingk,
C. A. Pennington,
L. F. Kourkoutis,
I. V. Bazarov,
J. M. Maxson
Abstract:
We report the design and performance of a time-resolved electron diffraction apparatus capable of producing intense bunches with simultaneously single digit micron probe size, long coherence length, and $200$ fs rms time resolution. We measure the 5d (peak) beam brightness at the sample location in micro-diffraction mode to be $7 \times 10^{13} \ \mathrm{A}/\text{m}^2\text{-rad}^2$. To generate hi…
▽ More
We report the design and performance of a time-resolved electron diffraction apparatus capable of producing intense bunches with simultaneously single digit micron probe size, long coherence length, and $200$ fs rms time resolution. We measure the 5d (peak) beam brightness at the sample location in micro-diffraction mode to be $7 \times 10^{13} \ \mathrm{A}/\text{m}^2\text{-rad}^2$. To generate high brightness electron bunches, the system employs high efficiency, low emittance semiconductor photocathodes driven with a wavelength near the photoemission threshold at a repetition rate up to 250 kHz. We characterize spatial, temporal, and reciprocal space resolution of the apparatus. We perform proof-of-principle measurements of ultrafast heating in single crystal Au samples and compare experimental results with simulations that account for the effects of multiple-scattering.
△ Less
Submitted 2 February, 2022; v1 submitted 15 November, 2021;
originally announced November 2021.
-
Ultimate bunch length and emittance performance of an MeV ultrafast electron diffraction apparatus with a DC gun and a multi-cavity SRF linac
Authors:
Adam Bartnik,
Colwyn Gulliford,
Georg H. Hoffstaetter,
Jared Maxson
Abstract:
We present the design of a high repetition rate MeV energy ultrafast electron diffraction instrument based on a DC photoelectron gun and an SRF linac with multiple independently controlled accelerating and bunching cavities. The design is based on the existing Cornell photoinjector, which can readily be applied to the presented findings. Using particle tracking simulations in conjunction with mult…
▽ More
We present the design of a high repetition rate MeV energy ultrafast electron diffraction instrument based on a DC photoelectron gun and an SRF linac with multiple independently controlled accelerating and bunching cavities. The design is based on the existing Cornell photoinjector, which can readily be applied to the presented findings. Using particle tracking simulations in conjunction with multiobjective genetic algorithm optimization, we explore the smallest bunch lengths, emittance, and probe spot sizes achievable. We present results for both stroboscopic conditions (with single electrons per pulse) and with $10^5$ electrons/bunch which may be suitable for single-shot diffraction images. In the stroboscopic case, the flexibility provided by the many-cavity bunching and acceleration allows for longitudinal phase space linearization without a higher harmonic field, providing sub-fs bunch lengths at the sample. Given low emittance photoemission conditions, these small bunch lengths can be maintained with probe transverse sizes at the single micron scale and below. In the case of $10^5$ electrons per pulse, we simulate state-of the art 5D brightness conditions: rms bunch lengths of 10 fs with 3 nm normalized emittances, while now permitting repetition rates as high as 1.3 GHz. Finally, to aid in the design of new SRF-based UED machines, we simulate the trade-off between the number of cavities used and achievable bunch length and emittance.
△ Less
Submitted 28 February, 2022; v1 submitted 13 August, 2021;
originally announced August 2021.
-
Point-to-Point Coulomb Effects in High Brightness Photoelectron Beamlines for Ultrafast Electron Diffraction
Authors:
M. Gordon,
S. B. van der Geer,
J. Maxson,
Y. -K. Kim
Abstract:
In an effort to increase spatial and temporal resolution of ultrafast electron diffraction and microscopy, ultra-high brightness photocathodes are actively sought to improve electron beam quality. Beam dynamics codes often approximate the Coulomb interaction with mean-field space charge, which is a good approximation in traditional beams. However, point-to-point Coulomb effects, such as disorder i…
▽ More
In an effort to increase spatial and temporal resolution of ultrafast electron diffraction and microscopy, ultra-high brightness photocathodes are actively sought to improve electron beam quality. Beam dynamics codes often approximate the Coulomb interaction with mean-field space charge, which is a good approximation in traditional beams. However, point-to-point Coulomb effects, such as disorder induced heating and the Boersch effect, can not be neglected in cold, dense beams produced by such photocathodes. In this paper, we introduce two new numerical methods to calculate the important effects of the photocathode image charge when using a point-to-point interaction model. Equipped with an accurate model of the image charge, we calculate the effects of point-to-point interactions on two high brightness photoemission beamlines for ultrafast diffraction. The first beamline uses a 200 keV gun, whereas the second uses a 5 MeV gun, each operating in the single-shot diffraction regime with $10^5$ electrons/pulse. Assuming a zero photoemission temperature, it is shown that including stochastic Coulomb effects increases the final emittance of these beamlines by over a factor of 2 and decreases the peak transverse phase space density by over a factor of 3 as compared to mean-field simulations. We then introduce a method to compute the energy released by disorder induced heating using the pair correlation function. This disorder induced heating energy was found to scale very near the theoretical result for stationary ultracold plasmas, and it accounts for over half of the emittance growth above mean-field simulations.
△ Less
Submitted 15 April, 2021;
originally announced April 2021.
-
Simulation of the transit-time optical stochastic cooling process in the Cornell Electron Storage Ring
Authors:
S. T. Wang,
M. B. Andorf,
I. V. Bazarov,
W. F. Bergan,
V. Khachatryan,
J. M. Maxson,
D. L. Rubin
Abstract:
In preparation for a demonstration of optical stochastic cooling in the Cornell Electron Storage Ring (CESR) we have developed a particle tracking simulation to study the relevant beam dynamics. Optical radiation emitted in the pickup undulator gives a momentum kick to that same particle in the kicker undulator. The optics of the electron bypass from pickup to kicker couples betatron amplitude and…
▽ More
In preparation for a demonstration of optical stochastic cooling in the Cornell Electron Storage Ring (CESR) we have developed a particle tracking simulation to study the relevant beam dynamics. Optical radiation emitted in the pickup undulator gives a momentum kick to that same particle in the kicker undulator. The optics of the electron bypass from pickup to kicker couples betatron amplitude and momentum offset to path length so that the momentum kick reduces emittance and momentum spread. Nearby electrons contribute an incoherent noise. Layout of the bypass line is presented that accommodates optics with a range of transverse and longitudinal cooling parameters. The simulation is used to determine cooling rates and their dependence on bunch and lattice parameters for bypass optics with distinct emittance and momentum acceptance.
△ Less
Submitted 24 June, 2021; v1 submitted 30 March, 2021;
originally announced March 2021.
-
Optical Stochastic Cooling with an Arc-Bypass in CESR
Authors:
M. B. Andorf,
W. F. Bergan,
I. V. Bazarov,
J. M. Maxson,
V. Khachatryan,
D. L. Rubin,
S. T. Wang
Abstract:
A proposed experiment to demonstrate Optical Stochastic Cooling (OSC) in the Cornell Electron Storage Ring (CESR) based on an arc-bypass design is presented. This arc-bypass provides significantly longer optical delay than the dog-leg style chicane, opening up the possibility of a multi-pass or staged optical amplifier that can achieve the gains required for effective cooling of hadron or heavy-io…
▽ More
A proposed experiment to demonstrate Optical Stochastic Cooling (OSC) in the Cornell Electron Storage Ring (CESR) based on an arc-bypass design is presented. This arc-bypass provides significantly longer optical delay than the dog-leg style chicane, opening up the possibility of a multi-pass or staged optical amplifier that can achieve the gains required for effective cooling of hadron or heavy-ions. Beyond introducing the arc-bypass, in this paper we study the stability requirements for the dipoles comprising it and investigate the use of an optical feedback system to relax the dipole and light-path stability tolerances.
△ Less
Submitted 5 October, 2020; v1 submitted 26 July, 2020;
originally announced July 2020.
-
The Role of Low Intrinsic Emittance in Modern Photoinjector Brightness
Authors:
Christopher M. Pierce,
Matthew B. Andorf,
Edmond Lu,
Matthew Gordon,
Young-Kee Kim,
Colwyn Gulliford,
Ivan V. Bazarov,
Jared M. Maxson,
Nora P. Norvell,
Bruce M. Dunham,
Tor O. Raubenheimer
Abstract:
Reducing the intrinsic emittance of photocathodes is one of the most promising routes to improving the brightness of electron sources. However, when emittance growth occurs during beam transport (for example, due to space-charge), it is possible that this emittance growth overwhelms the contribution of the photocathode and, thus, in this case source emittance improvements are not beneficial. Using…
▽ More
Reducing the intrinsic emittance of photocathodes is one of the most promising routes to improving the brightness of electron sources. However, when emittance growth occurs during beam transport (for example, due to space-charge), it is possible that this emittance growth overwhelms the contribution of the photocathode and, thus, in this case source emittance improvements are not beneficial. Using multi-objective genetic optimization, we investigate the role intrinsic emittance plays in determining the final emittance of several space-charge dominated photoinjectors, including those for high repetition rate free electron lasers and ultrafast electron diffraction. We introduce a new metric to predict the scale of photocathode emittance improvements that remain beneficial and explain how additional tuning is required to take full advantage of new photocathode technologies. Additionally, we determine the scale of emittance growth due to point-to-point Coulomb interactions with a fast tree-based space-charge solver. Our results show that in the realistic high brightness photoinjector applications under study, the reduction of thermal emittance to values as low as 50 pm/um (1 meV MTE) remains a viable option for the improvement of beam brightness.
△ Less
Submitted 16 April, 2020;
originally announced April 2020.
-
An Ultra-Compact X-Ray Free-Electron Laser
Authors:
J. B. Rosenzweig,
N. Majernik,
R. R. Robles,
G. Andonian,
O. Camacho,
A. Fukasawa,
A. Kogar,
G. Lawler,
Jianwei Miao,
P. Musumeci,
B. Naranjo,
Y. Sakai,
R. Candler,
B. Pound,
C. Pellegrini,
C. Emma,
A. Halavanau,
J. Hastings,
Z. Li,
M. Nasr,
S. Tantawi,
P. Anisimov,
B. Carlsten,
F. Krawczyk,
E. Simakov
, et al. (11 additional authors not shown)
Abstract:
In the field of beam physics, two frontier topics have taken center stage due to their potential to enable new approaches to discovery in a wide swath of science. These areas are: advanced, high gradient acceleration techniques, and x-ray free electron lasers (XFELs). Further, there is intense interest in the marriage of these two fields, with the goal of producing a very compact XFEL. In this con…
▽ More
In the field of beam physics, two frontier topics have taken center stage due to their potential to enable new approaches to discovery in a wide swath of science. These areas are: advanced, high gradient acceleration techniques, and x-ray free electron lasers (XFELs). Further, there is intense interest in the marriage of these two fields, with the goal of producing a very compact XFEL. In this context, recent advances in high gradient radio-frequency cryogenic copper structure research have opened the door to the use of surface electric fields between 250 and 500 MV/m. Such an approach is foreseen to enable a new generation of photoinjectors with six-dimensional beam brightness beyond the current state-of-the-art by well over an order of magnitude. This advance is an essential ingredient enabling an ultra-compact XFEL (UC-XFEL). In addition, one may accelerate these bright beams to GeV scale in less than 10 meters. Such an injector, when combined with inverse free electron laser-based bunching techniques can produce multi-kA beams with unprecedented beam quality, quantified by ~50 nm-rad normalized emittances. These beams, when injected into innovative, short-period (1-10 mm) undulators uniquely enable UC-XFELs having footprints consistent with university-scale laboratories. We describe the architecture and predicted performance of this novel light source, which promises photon production per pulse of a few percent of existing XFEL sources. We review implementation issues including collective beam effects, compact x-ray optics systems, and other relevant technical challenges. To illustrate the potential of such a light source to fundamentally change the current paradigm of XFELs with their limited access, we examine possible applications in biology, chemistry, materials, atomic physics, industry, and medicine which may profit from this new model of performing XFEL science.
△ Less
Submitted 14 August, 2020; v1 submitted 12 March, 2020;
originally announced March 2020.
-
Ultracold electrons via Near-Threshold Photoemission from Single-Crystal Cu(100)
Authors:
Siddharth Karkare,
Gowri Adhikari,
W. Andreas Schroeder,
J. Kevin Nangoi,
Tomas Arias,
Jared Maxson,
Howard Padmore
Abstract:
Achieving a low mean transverse energy or temperature of electrons emitted from the photocathode-based electron sources is critical to the development of next-generation and compact X-ray Free Electron Lasers and Ultrafast Electron Diffraction, Spectroscopy and Microscopy experiments. In this paper, we demonstrate a record low mean transverse energy of 5 meV from the cryo-cooled (100) surface of c…
▽ More
Achieving a low mean transverse energy or temperature of electrons emitted from the photocathode-based electron sources is critical to the development of next-generation and compact X-ray Free Electron Lasers and Ultrafast Electron Diffraction, Spectroscopy and Microscopy experiments. In this paper, we demonstrate a record low mean transverse energy of 5 meV from the cryo-cooled (100) surface of copper using near-threshold photoemission. Further, we also show that the electron energy spread obtained from such a surface is less than 11.5 meV, making it the smallest energy spread electron source known to date: more than an order of magnitude smaller than any existing photoemission, field emission or thermionic emission based electron source. Our measurements also shed light on the physics of electron emission and show how the energy spread at few meV scale energies is limited by both the temperature and the vacuum density of states.
△ Less
Submitted 26 February, 2020;
originally announced February 2020.
-
Lossless monochromation for electron microscopy with pulsed photoemission sources and rf cavities
Authors:
Cameron J. R. Duncan,
David A. Muller,
Jared M. Maxson
Abstract:
Resonant radiofrequency cavities enable exquisite time-energy control of electron beams when synchronized with laser driven photoemission. We present a lossless monochromator design that exploits this fine control in the one-electron-per-pulse regime. The theoretically achievable maximum beam current on target is orders of magnitude greater than state-of-the-art monochromators for the same spatial…
▽ More
Resonant radiofrequency cavities enable exquisite time-energy control of electron beams when synchronized with laser driven photoemission. We present a lossless monochromator design that exploits this fine control in the one-electron-per-pulse regime. The theoretically achievable maximum beam current on target is orders of magnitude greater than state-of-the-art monochromators for the same spatial and energy resolution. This improvement is the result of monochromating in the time domain, unconstrained by the transverse brightness of the electron source. We show analytically and confirm numerically that cavity parameters chosen to minimize energy spread perform the additional function of undoing the appreciable effect of chromatic aberration in the upstream optics. We argue that our design has significant applications in both ultra-fast and non-time-resolved microscopy, provided photoelectron sources of sufficiently small size and laser sources of sufficiently high repetition rate. Our design achieves in simulations more than two orders of magnitude reduction in beam energy spread, down to single digit meV. Overcoming the minimum probe-size limit that chromatic aberration imposes, our design clears a path for high-current, high-resolution electron beam applications at primary energies from single to hundreds of keV.
△ Less
Submitted 5 January, 2021; v1 submitted 25 February, 2020;
originally announced February 2020.
-
Improved lifetime of a high spin polarization superlattice photocathode
Authors:
Jai Kwan Bae,
Alice Galdi,
Luca Cultrera,
Frank Ikponmwen,
Jared Maxson,
Ivan Bazarov
Abstract:
Negative Electron Affinity (NEA) activated surfaces are required to extract highly spin polarized electron beams from GaAs-based photocathodes, but they suffer extreme sensitivity to poor vacuum conditions that results in rapid degradation of quantum efficiency. We report on series of unconventional NEA activations on surfaces of bulk GaAs with Cs, Sb, and O2 using different methods of oxygen expo…
▽ More
Negative Electron Affinity (NEA) activated surfaces are required to extract highly spin polarized electron beams from GaAs-based photocathodes, but they suffer extreme sensitivity to poor vacuum conditions that results in rapid degradation of quantum efficiency. We report on series of unconventional NEA activations on surfaces of bulk GaAs with Cs, Sb, and O2 using different methods of oxygen exposure for optimizing photocathode performance. One order of magnitude improvement in lifetime with respect to the standard Cs-O2 activation is achieved without significant loss on electron spin polarization and quantum efficiency by codepositing Cs, Sb, and O2. A strained GaAs/GaAsP superlattice sample activated with the codeposition method demonstrated similar enhancement in lifetime near the photoemission threshold while maintaining 90% spin polarization.
△ Less
Submitted 21 November, 2019;
originally announced November 2019.
-
Development of a 3-D energy-momentum analyzer for meV-scale energy electrons
Authors:
S. Karkare,
J. Feng,
J. Maxson,
H. A. Padmore
Abstract:
In this article, we report on the development of a time-of-flight based electron energy analyzer capable of measuring the 3-D momentum and energy distributions of very low energy (meV-scale) photoemitted electrons. This analyzer is capable of measuring energy and 3-D momentum distributions of electrons with energies down to 1 meV with a sub-meV energy resolution. This analyzer is an ideal tool for…
▽ More
In this article, we report on the development of a time-of-flight based electron energy analyzer capable of measuring the 3-D momentum and energy distributions of very low energy (meV-scale) photoemitted electrons. This analyzer is capable of measuring energy and 3-D momentum distributions of electrons with energies down to 1 meV with a sub-meV energy resolution. This analyzer is an ideal tool for studying photoemission processes very close to the photoemission threshold and also for studying the physics of photoemission based electron sources.
△ Less
Submitted 4 April, 2019;
originally announced April 2019.
-
Brightness of nonequilibrium photoemission in metallic photocathodes near threshold
Authors:
Jai Kwan Bae,
Ivan Bazarov,
Pietro Musumeci,
Siddharth Karkare,
Howard Padmore,
Jared Maxson
Abstract:
The operation of photoemission electron sources with wavelengths near the photoemission threshold has been shown to dramatically decrease the minimum achievable photocathode emittance, but at the cost of significantly reduced quantum efficiency (QE). In this work, we show that for femtosecond laser and electron pulses, the increase in required laser intensities due to the low QE drives the photoca…
▽ More
The operation of photoemission electron sources with wavelengths near the photoemission threshold has been shown to dramatically decrease the minimum achievable photocathode emittance, but at the cost of significantly reduced quantum efficiency (QE). In this work, we show that for femtosecond laser and electron pulses, the increase in required laser intensities due to the low QE drives the photocathode electronic distribution far from static equilibrium. We adapt an existing dynamic model of the electron occupation under high intensity laser illumination to predict the time-dependent effects of the nonequilibrium electron distribution on the QE, mean transverse energy (MTE), and emission brightness of metal phtocathodes. We find that multiphoton photoemission dramatically alters the MTE as compared to thermal equilibrium models, causing the MTE to no longer be a monotonic function of photon excess energy.
△ Less
Submitted 21 August, 2018;
originally announced August 2018.
-
Enhanced energy gain in a dielectric laser accelerator using a tilted pulse front laser
Authors:
D. Cesar,
J. Maxson,
P. Musumeci,
X. Shen,
R. J. England,
K. P. Wootton,
S. Tan
Abstract:
Using an 800 nm, 45 fs pulse-front-tilted laser we demonstrate a record 315 keV energy gain in a dual grating dielectric laser accelerator (DLA) and average accelerating gradients of 560 MV/m over 0.5 mm. These results open a new regime in DLA characterized by significant evolution of the beam distribution in the longitudinal phase space, corresponding to >1/4 of a synchrotron oscillation. By tilt…
▽ More
Using an 800 nm, 45 fs pulse-front-tilted laser we demonstrate a record 315 keV energy gain in a dual grating dielectric laser accelerator (DLA) and average accelerating gradients of 560 MV/m over 0.5 mm. These results open a new regime in DLA characterized by significant evolution of the beam distribution in the longitudinal phase space, corresponding to >1/4 of a synchrotron oscillation. By tilting the laser wavefront we control the resonant velocity of the DLA and observe a net energy gain, indicating that a tapered optical phase could be used to achieve very high energy gain.
△ Less
Submitted 6 April, 2018; v1 submitted 2 April, 2018;
originally announced April 2018.
-
Ultra-High Brightness Electron Beams from Very-High Field Cryogenic Radio-frequency Photocathode Sources
Authors:
J. B. Rosenzweig,
A. Cahill,
B. Carlsten,
G. Castorina,
M. Croia,
C. Emma,
A. Fukusawa,
B. Spataro,
D. Alesini,
V. Dolgashev,
M. Ferrario,
G. Lawler,
R. Li,
C. Limborg,
J. Maxson,
P. Musumeci,
R. Pompili,
S. Tantawi,
O. Williams
Abstract:
Recent investigations of RF copper structures operated at cryogenic temperatures performed by a SLAC-UCLA collaboration have shown a dramatic increase in the maximum surface electric field, to 500 MV/m. We examine use of these fields to enable very high field cryogenic photoinjectors that can attain over an order of magnitude increase in peak electron beam brightness. We present beam dynamics stud…
▽ More
Recent investigations of RF copper structures operated at cryogenic temperatures performed by a SLAC-UCLA collaboration have shown a dramatic increase in the maximum surface electric field, to 500 MV/m. We examine use of these fields to enable very high field cryogenic photoinjectors that can attain over an order of magnitude increase in peak electron beam brightness. We present beam dynamics studies relevant to X-ray FEL injectors, using start-to-end simulations that show the high brightness and low emittance of this source enables operation of a compact FEL reaching a photon energy of 80 keV. The preservation of beam brightness in compression, exploiting micro-bunching techniques is discussed. While the gain in brightness at high field is due to increase of the emission current density, further increases in brightness due to lowering of the intrinsic cathode emittance in cryogenic operation are also enabled. While the original proposal for this type of cryogenic, ultra-high field photoinjector has emphasized S-band designs, there are numerous potential advantages that may be conferred by operation in C-band. We examine issues related to experimental implementation in C-band, and expected performance of this type of device in a future hard X-ray FEL such as MaRIE.
△ Less
Submitted 20 January, 2018;
originally announced January 2018.
-
Optical design for increased interaction length in a high gradient dielectric laser accelerator
Authors:
D. Cesar,
J. Maxson,
P. Musumeci,
X. Shen,
R. J. England,
K. P. Wootton
Abstract:
We present a methodology for designing and measuring pulse front tilt in an ultrafast laser for use in dielectric laser acceleration. Previous research into dielectric laser accelerating modules has focused on measuring high accelerating gradients in novel structures, but has done so only for short electron-laser coupling lengths. Here we demonstrate an optical design to extend the laser-electron…
▽ More
We present a methodology for designing and measuring pulse front tilt in an ultrafast laser for use in dielectric laser acceleration. Previous research into dielectric laser accelerating modules has focused on measuring high accelerating gradients in novel structures, but has done so only for short electron-laser coupling lengths. Here we demonstrate an optical design to extend the laser-electron interaction to 1mm.
△ Less
Submitted 3 January, 2018;
originally announced January 2018.
-
Relativistic electron beam acceleration in a zero-slippage terahertz-driven Inverse Free Electron Laser scheme
Authors:
Emma Curry,
Siara Fabbri,
Jared Maxson,
Pietro Musumeci,
Avraham Gover
Abstract:
THz radiation promises breakthrough advances in compact advanced accelerators due to the high frequency and GV/m fields achievable, orders of magnitude larger than in conventional radiofrequency (RF) based accelerators. Compared to laser-driven schemes, the large phase acceptances of THz-driven accelerators are advantageous for operation with sizable charge. Despite burgeoning research, THz source…
▽ More
THz radiation promises breakthrough advances in compact advanced accelerators due to the high frequency and GV/m fields achievable, orders of magnitude larger than in conventional radiofrequency (RF) based accelerators. Compared to laser-driven schemes, the large phase acceptances of THz-driven accelerators are advantageous for operation with sizable charge. Despite burgeoning research, THz sources, particularly laser-based ones, cannot yet compete with the efficiency of RF amplifiers for high average current accelerators. Nevertheless, THz-based phase space manipulation is of immediate interest for a variety of applications, including generation and diagnostics of ultrashort bunches for electron diffraction/microscopy and compact free-electron laser applications.
The challenge of maintaining overlap and synchronism between an electron beam and short laser-generated THz pulse has so far limited interactions to the few mm scale. We discuss a novel scheme for simultaneous group and phase velocity matching of nearly single-cycle THz radiation with a relativistic electron beam for meter-scale interaction. We demonstrate energy modulations of up to 150 keV using modest THz pulse energies (up to 1 uJ). We apply this large and efficient energy exchange for beam compression and time-stam** of a relativistic beam, paving the way towards realizing the unique opportunities enabled by laser-based THz accelerators.
△ Less
Submitted 5 October, 2017; v1 submitted 21 August, 2017;
originally announced August 2017.
-
Nonlinear response in high-field dielectric laser accelerators
Authors:
D. Cesar,
S. Custodio,
J. Maxson,
P. Musumeci,
X. Shen,
E. Threlkeld,
R. J. England,
A. Hanuka,
I. V. Makasyuk,
E. A. Peralta,
K. P. Wootton,
Z. Wu
Abstract:
Laser powered dielectric structures achieve high-gradient particle acceleration by taking advantage of modern laser technology capable of producing electric fields in excess of 10GV/m. These fields can drive the bulk dielectric beyond its linear response, and break the phase synchronicity between the accelerating field and the electrons. We show how control of the pulse dispersion can be used to c…
▽ More
Laser powered dielectric structures achieve high-gradient particle acceleration by taking advantage of modern laser technology capable of producing electric fields in excess of 10GV/m. These fields can drive the bulk dielectric beyond its linear response, and break the phase synchronicity between the accelerating field and the electrons. We show how control of the pulse dispersion can be used to compensate the effect of self-phase modulation and maximize the energy gain in the laser accelerator.In our experiment, a high brightness 8MeV e-beam is used to probe accelerating fields of 1.8GV/m in a 'grating-reset' dielectric structure illuminated by a 45fs laser pulse with a fluence of 0.7J/cm$^2$.
△ Less
Submitted 7 July, 2017;
originally announced July 2017.
-
Direct measurement of sub-10 fs relativistic electron beams with ultralow emittance
Authors:
Jared Maxson,
David Cesar,
Giacomo Calmasini,
Alexander Ody,
Pietro Musumeci,
David Alesini
Abstract:
Ultralow emittance ($\leq20$ nm, normalized) electron beams with $10^5$ electrons per bunch are obtained by tightly focusing an ultrafast ($\sim$ 100 fs) laser pulse on the cathode of a 1.6 cell radiofrequency photoinjector. Taking advantage of the small initial longitudinal emittance, a downstream velocity bunching cavity is used to compress the beam to $<10$ fs rms bunch length. The measurement…
▽ More
Ultralow emittance ($\leq20$ nm, normalized) electron beams with $10^5$ electrons per bunch are obtained by tightly focusing an ultrafast ($\sim$ 100 fs) laser pulse on the cathode of a 1.6 cell radiofrequency photoinjector. Taking advantage of the small initial longitudinal emittance, a downstream velocity bunching cavity is used to compress the beam to $<10$ fs rms bunch length. The measurement is performed using a thick high voltage deflecting cavity which is shown to be well-suited to measure ultrashort durations of bunching beams, provided that the beam reaches a ballistic longitudinal focus at the cavity center.
△ Less
Submitted 9 March, 2017; v1 submitted 5 November, 2016;
originally announced November 2016.
-
Ultrafast laser pulse heating of metallic photocathodes and its contribution to intrinsic emittance
Authors:
J. Maxson,
P. Musumeci,
L. Cultrera,
S. Karkare,
H. Padmore
Abstract:
The heating of the electronic distribution of a copper photocathode due to an intense drive laser pulse is calculated under the two-temperature model using fluences and pulse lengths typical in RF photoinjector operation. Using the finite temperature-extended relations for the photocathode intrinsic emittance and quantum efficiency, the time-dependent emittance growth due to the same photoemission…
▽ More
The heating of the electronic distribution of a copper photocathode due to an intense drive laser pulse is calculated under the two-temperature model using fluences and pulse lengths typical in RF photoinjector operation. Using the finite temperature-extended relations for the photocathode intrinsic emittance and quantum efficiency, the time-dependent emittance growth due to the same photoemission laser pulse is calculated. This laser heating is seen to limit the intrinsic emittance achievable for photoinjectors using short laser pulses and low quantum efficiency metal photocathodes. A pump-probe photocathode experiment in a standard 1.6 cell S-band gun is proposed, in which simulations show the time dependent thermal emittance modulation within the bunch from laser heating can persist for meters downstream and, in principle, be measured using a slice emittance diagnostic.
△ Less
Submitted 22 August, 2016; v1 submitted 17 June, 2016;
originally announced June 2016.
-
Multi-objective Optimizations of a Normal Conducting RF Gun Based Ultra Fast Electron Diffraction Beamline
Authors:
C. Gulliford,
A. Bartnik,
J. Maxson,
I. Bazarov
Abstract:
We present the results of multi-objective genetic algorithm optimizations of a potential single shot ultra fast electron diffraction beamline utilizing a 100 MV/m 1.6 cell normal conducting rf (NCRF) gun, as well as a 9 cell 2pi/3 bunching cavity placed between two solenoids. Optimizations of the transverse projected emittance as a function of bunch charge are presented and discussed in terms of t…
▽ More
We present the results of multi-objective genetic algorithm optimizations of a potential single shot ultra fast electron diffraction beamline utilizing a 100 MV/m 1.6 cell normal conducting rf (NCRF) gun, as well as a 9 cell 2pi/3 bunching cavity placed between two solenoids. Optimizations of the transverse projected emittance as a function of bunch charge are presented and discussed in terms of the scaling laws derived in the charge saturation limit. Additionally, optimization of the transverse coherence length as a function of final rms bunch length at the sample location have been performed for a charge of 1e6 electrons. Analysis of the solutions is discussed, as are the effects of disorder induced heating. In particular, for a charge of $10^6$ electrons and final beam size greater than or equal to 25 microns, we found a relative coherence length of 0.07, 0.1, and 0.2 nm/micron for a final bunch length of approximately 5, 30, and 100 fs, respectively. These results demonstrate the viability of using genetic algorithms in the design and operation of ultrafast electron diffraction beamlines.
△ Less
Submitted 13 April, 2016;
originally announced April 2016.
-
Demonstration of single-shot picosecond time-resolved MeV electron imaging using a compact permanent magnet quadrupole based lens
Authors:
D. Cesar,
J. Maxson,
P. Musumeci,
Y. Sun,
J. Harrison,
P. Frigola,
F. H. O'Shea,
H. To,
D. Alesini,
R. K. Li
Abstract:
We present the results of an experiment where a short focal length (~ 1.3 cm) permanent magnet electron lens is used to image micron-size features of a metal sample in a single shot, using an ultra- high brightness ps-long 4 MeV electron beam from a radiofrequency photoinjector. Magnifcation ratios in excess of 30x were obtained using a triplet of compact, small gap (3.5 mm), Halbach-style permane…
▽ More
We present the results of an experiment where a short focal length (~ 1.3 cm) permanent magnet electron lens is used to image micron-size features of a metal sample in a single shot, using an ultra- high brightness ps-long 4 MeV electron beam from a radiofrequency photoinjector. Magnifcation ratios in excess of 30x were obtained using a triplet of compact, small gap (3.5 mm), Halbach-style permanent magnet quadrupoles with nearly 600 T/m field gradients. These results pave the way to- wards single shot time-resolved electron microscopy and open new opportunities in the applications of high brightness electron beams.
△ Less
Submitted 4 April, 2016;
originally announced April 2016.
-
Next Generation High Brightness Electron Beams From Ultra-High Field Cryogenic Radiofrequency Photocathode Sources
Authors:
J. B. Rosenzweig,
A. Cahill,
V. Dolgashev,
C. Emma,
A. Fukusawa,
R. Li,
C. Limborg,
J. Maxson,
P. Musumeci,
A. Nause,
R. Pakter,
R. Pompili,
R. Roussel,
B. Spataro,
S. Tantawi
Abstract:
Recent studies of the performance of radio-frequency (RF) copper cavities operated at cryogenic temperatures have shown a dramatic increase in the maximum achievable surface electric field. We propose to exploit this development to enable a new generation of photoinjectors operated at cryogenic temperatures that may attain, through enhancement of the launch field at the photocathode, a significant…
▽ More
Recent studies of the performance of radio-frequency (RF) copper cavities operated at cryogenic temperatures have shown a dramatic increase in the maximum achievable surface electric field. We propose to exploit this development to enable a new generation of photoinjectors operated at cryogenic temperatures that may attain, through enhancement of the launch field at the photocathode, a significant increase in five-dimensional electron beam brightness. We present detailed studies of the beam dynamics associated with such a system, by examining an S-band photoinjector operated at 250 MV/m peak electric field that reaches normalized emittances in the 40 nm-rad range at charges (100-200 pC) suitable for use in a hard X-ray free-electron laser (XFEL) scenario based on the LCLS. In this case, we show by start-to-end simulations that the properties of this source may give rise to high efficiency operation of an XFEL, and permit extension of the photon energy reach by an order of magnitude, to over 80 keV. The brightness needed for such XFELs is achieved through low source emittances in tandem with high current after compression. In the XFEL examples analyzed, the emittances during final compression are preserved using micro-bunching techniques. Extreme low emittance scenarios obtained at pC charge, appropriate for significantly extending temporal resolution limits of ultrafast electron diffraction and microscopy experiments, are also reviewed. While the increase in brightness in a cryogenic photoinjector is mainly due to the augmentation of the emission current density via field enhancement, further possible increases in performance arising from lowering the intrinsic cathode emittance in cryogenic operation are also analyzed. Issues in experimental implementation, including cavity optimization for lowering cryogenic thermal dissipation, external coupling, and cryo-cooler system are discussed.
△ Less
Submitted 30 December, 2018; v1 submitted 4 March, 2016;
originally announced March 2016.
-
Demonstration of Low Emittance in the Cornell Energy Recovery Linac Injector Prototype
Authors:
Colwyn Gulliford,
Adam Bartnik,
Ivan Bazarov,
Luca Cultrera,
John Dobbins,
Bruce Dunham,
Francisco Gonzalez,
Siddharth Karkare,
Hyeri Lee,
Heng Li,
Yulin Li,
Xianghong Liu,
Jared Maxson,
Christian Nguyen,
Karl Smolenski,
Zhi Zhao
Abstract:
We present a detailed study of the six-dimensional phase space of the electron beam produced by the Cornell Energy Recovery Linac Photoinjector, a high-brightness, high repetition rate (1.3 GHz) DC photoemission source designed to drive a hard x-ray energy recovery linac (ERL). A complete simulation model of the injector has been constructed, verified by measurement, and optimized. Both the horizo…
▽ More
We present a detailed study of the six-dimensional phase space of the electron beam produced by the Cornell Energy Recovery Linac Photoinjector, a high-brightness, high repetition rate (1.3 GHz) DC photoemission source designed to drive a hard x-ray energy recovery linac (ERL). A complete simulation model of the injector has been constructed, verified by measurement, and optimized. Both the horizontal and vertical 2D transverse phase spaces, as well as the time-resolved (sliced) horizontal phase space, were simulated and directly measured at the end of the injector for 19 pC and 77 pC bunches at roughly 8 MeV. These bunch charges were chosen because they correspond to 25 mA and 100 mA average current if operating at the full 1.3 GHz repetition rate. The resulting 90% normalized transverse emittances for 19 (77) pC/bunch were 0.23 +/- 0.02 (0.51 +/- 0.04) microns in the horizontal plane, and 0.14 +/- 0.01 (0.29 +/- 0.02) microns in the vertical plane, respectively. These emittances were measured with a corresponding bunch length of 2.1 +/- 0.1 (3.0 +/- 0.2) ps, respectively. In each case the rms momentum spread was determined to be on the order of 1e-3. Excellent overall agreement between measurement and simulation has been demonstrated. Using the emittances and bunch length measured at 19 pC/bunch, we estimate the electron beam quality in a 1.3 GHz, 5 GeV hard x-ray ERL to be at least a factor of 20 times better than that of existing storage rings when the rms energy spread of each device is considered. These results represent a milestone for the field of high-brightness, high-current photoinjectors.
△ Less
Submitted 23 July, 2013; v1 submitted 9 April, 2013;
originally announced April 2013.
-
Fundamental Photoemission Brightness Limit from Disorder Induced Heating
Authors:
Jared Maxson,
Ivan Bazarov,
Christopher Coleman-Smith,
Weishi Wan,
Howard Padmore
Abstract:
We determine the limit of the lowest achievable photoemitted electron temperature, and therefore the maximum achievable electron brightness, due to heating just after emission into vacuum, applicable to dense relativistic or nonrelativistic photoelectron beams. This heating is due to poorly screened Coulomb interactions equivalent to disorder induced heating seen in ultracold neutral plasmas. We f…
▽ More
We determine the limit of the lowest achievable photoemitted electron temperature, and therefore the maximum achievable electron brightness, due to heating just after emission into vacuum, applicable to dense relativistic or nonrelativistic photoelectron beams. This heating is due to poorly screened Coulomb interactions equivalent to disorder induced heating seen in ultracold neutral plasmas. We first show that traditional analytic methods of Coulomb collisions fail for the calculation of this strongly coupled heating. Instead, we employ an N-body tree algorithm to compute the universal scaling of the disorder induced heating in fully contained bunches, and show it to agree well with a simple model utilizing the tabulated correlated energy of one component plasmas. We also present simulations for beams undergoing Coulomb explosion at the photocathode, and demonstrate that both the temperature growth and subsequent cooling must be characterized by correlated effects, as well as correlation-frozen dynamics. In either case, the induced temperature is found to be of several meV for typical photoinjector beam densities, a significant fraction of the intrinsic beam temperature of the coldest semiconductor photocathodes. Thus, we expect disorder induced heating to become a major limiting factor in the next generation of photoemission sources delivering dense bunches and employing ultra-cold photoemitters.
△ Less
Submitted 9 July, 2013; v1 submitted 5 April, 2013;
originally announced April 2013.
-
Photocathode Behavior During High Current Running in the Cornell ERL Photoinjector
Authors:
Luca Cultrera,
Jared Maxson,
Ivan Bazarov,
Sergey Belomestnykh,
John Dobbins,
Bruce Dunham,
Siddharth Karkare,
Roger Kaplan,
Vaclav Kostroun,
Yulin Li,
Xianghong Liu,
Florian Löhl,
Karl Smolenski,
Zhi Zhao,
David Rice,
Peter Quigley,
Maury Tigner,
Vadim Veshcherevich,
Kenneth Finkelstein,
Darren Dale,
Benjamin Pichler
Abstract:
The Cornell University Energy Recovery Linac (ERL) photoinjector has recently demonstrated operation at 20 mA for approximately 8 hours, utilizing a multialkali photocathode deposited on a Si substrate. We describe the recipe for photocathode deposition, and will detail the parameters of the run. Post-run analysis of the photocathode indicates the presence of significant damage to the substrate, p…
▽ More
The Cornell University Energy Recovery Linac (ERL) photoinjector has recently demonstrated operation at 20 mA for approximately 8 hours, utilizing a multialkali photocathode deposited on a Si substrate. We describe the recipe for photocathode deposition, and will detail the parameters of the run. Post-run analysis of the photocathode indicates the presence of significant damage to the substrate, perhaps due to ion back-bombardment from the residual beamline gas. While the exact cause of the substrate damage remains unknown, we describe multiple surface characterization techniques (X-ray fluorescence spectroscopy, X-ray diffraction, atomic force and scanning electron microscopy) used to study the interesting morphological and crystallographic features of the photocathode surface after its use for high current beam production. Finally, we present a simple model of crystal damage due to ion back-bombardment, which agrees qualitatively with the distribution of damage on the substrate surface.
△ Less
Submitted 16 October, 2011;
originally announced October 2011.
-
Thermal emittance measurements of a cesium potassium antimonide photocathode
Authors:
Ivan Bazarov,
Luca Cultrera,
Adam Bartnik,
Bruce Dunham,
Siddharth Karkare,
Yulin Li,
Xianghong Liu,
Jared Maxson,
William Roussel
Abstract:
Thermal emittance measurements of a CsK2Sb photocathode at several laser wavelengths are presented. The emittance is obtained with a solenoid scan technique using a high voltage dc photoemission gun. The thermal emittance is 0.56+/-0.03 mm-mrad/mm(rms) at 532 nm wavelength. The results are compared with a simple photoemission model and found to be in a good agreement.
Thermal emittance measurements of a CsK2Sb photocathode at several laser wavelengths are presented. The emittance is obtained with a solenoid scan technique using a high voltage dc photoemission gun. The thermal emittance is 0.56+/-0.03 mm-mrad/mm(rms) at 532 nm wavelength. The results are compared with a simple photoemission model and found to be in a good agreement.
△ Less
Submitted 11 May, 2011;
originally announced May 2011.
-
Comparison of DC and SRF Photoemission Guns For High Brightness High Average Current Beam Production
Authors:
Ivan V. Bazarov,
Allen Kim,
Manu N. Lakshmanan,
Jared M. Maxson
Abstract:
A comparison of the two most prominent electron sources of high average current high brightness electron beams, DC and superconducting RF photoemission guns, is carried out using a large-scale multivariate genetic optimizer interfaced with space charge simulation codes. The gun geometry for each case is varied concurrently with laser pulse shape and parameters of the downstream beamline elements o…
▽ More
A comparison of the two most prominent electron sources of high average current high brightness electron beams, DC and superconducting RF photoemission guns, is carried out using a large-scale multivariate genetic optimizer interfaced with space charge simulation codes. The gun geometry for each case is varied concurrently with laser pulse shape and parameters of the downstream beamline elements of the photoinjector to obtain minimum emittance as a function of bunch charge. Realistic constraints are imposed on maximum field values for the two gun types. The SRF and DC gun emittances and beam envelopes are compared for various values of photocathode thermal emittance. The performance of the two systems is found to be largely comparable provided low intrinsic emittance photocathodes can be employed.
△ Less
Submitted 28 March, 2011; v1 submitted 26 March, 2011;
originally announced March 2011.