-
A Modified da Vinci Surgical Instrument for OCE based Elasticity Estimation with Deep Learning
Authors:
Maximilian Neidhardt,
Robin Mieling,
Sarah Latus,
Martin Fischer,
Tobias Maurer,
Alexander Schlaefer
Abstract:
Robot-assisted surgery has advantages compared to conventional laparoscopic procedures, e.g., precise movement of the surgical instruments, improved dexterity, and high-resolution visualization of the surgical field. However, mechanical tissue properties may provide additional information, e.g., on the location of lesions or vessels. While elastographic imaging has been proposed, it is not readily…
▽ More
Robot-assisted surgery has advantages compared to conventional laparoscopic procedures, e.g., precise movement of the surgical instruments, improved dexterity, and high-resolution visualization of the surgical field. However, mechanical tissue properties may provide additional information, e.g., on the location of lesions or vessels. While elastographic imaging has been proposed, it is not readily available as an online modality during robot-assisted surgery. We propose modifying a da~Vinci surgical instrument to realize optical coherence elastography (OCE) for quantitative elasticity estimation. The modified da~Vinci instrument is equipped with piezoelectric elements for shear wave excitation and we employ fast optical coherence tomography (OCT) imaging to track propagating wave fields, which are directly related to biomechanical tissue properties. All high-voltage components are mounted at the proximal end outside the patient. We demonstrate that external excitation at the instrument shaft can effectively stimulate shear waves, even when considering dam**. Comparing conventional and deep learning-based signal processing, resulting in mean absolute errors of 19.27 kPa and 6.29 kPa, respectively. These results illustrate that precise quantitative elasticity estimates can be obtained. We also demonstrate quantitative elasticity estimation on ex-vivo tissue samples of heart, liver and stomach, and show that the measurements can be used to distinguish soft and stiff tissue types.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
Quantum dot coupled to topological insulators: The role of edge states
Authors:
Martin T. Maurer,
Yen-Ting Lin,
Dante M. Kennes,
Mikhail Pletyukhov,
Herbert Schoeller,
Volker Meden
Abstract:
We investigate a system consisting of one or two topological-insulator leads which are tunnel coupled to a single dot level. The leads are described by the one-dimensional Su-Schrieffer-Heeger model. We show that (topological) edge states cause characteristic features in the dot spectral function, the dot occupation, and the finite-bias current across the dot. As the kinetic energy is quenched in…
▽ More
We investigate a system consisting of one or two topological-insulator leads which are tunnel coupled to a single dot level. The leads are described by the one-dimensional Su-Schrieffer-Heeger model. We show that (topological) edge states cause characteristic features in the dot spectral function, the dot occupation, and the finite-bias current across the dot. As the kinetic energy is quenched in the dot region, local two-particle interactions are of particular relevance there. This motivates us to test whether the aforementioned edge-state features are robust against such interactions; we report here that they are either robust or even enhanced. We conclude that the characteristic features can be used to determine if the leads are in their topologically non-trivial or trivial phase.
△ Less
Submitted 17 March, 2022; v1 submitted 22 December, 2021;
originally announced December 2021.
-
MATISSE, the VLTI mid-infrared imaging spectro-interferometer
Authors:
B. Lopez,
S. Lagarde,
R. G. Petrov,
W. Jaffe,
P. Antonelli,
F. Allouche,
P. Berio,
A. Matter,
A. Meilland,
F. Millour,
S. Robbe-Dubois,
Th. Henning,
G. Weigelt,
A. Glindemann,
T. Agocs,
Ch. Bailet,
U. Beckmann,
F. Bettonvil,
R. van Boekel,
P. Bourget,
Y. Bresson,
P. Bristow,
P. Cruzalèbes,
E. Eldswijk,
Y. Fanteï Caujolle
, et al. (128 additional authors not shown)
Abstract:
Context:Optical interferometry is at a key development stage. ESO's VLTI has established a stable, robust infrastructure for long-baseline interferometry for general astronomical observers. The present second-generation instruments offer a wide wavelength coverage and improved performance. Their sensitivity and measurement accuracy lead to data and images of high reliability. Aims:We have develope…
▽ More
Context:Optical interferometry is at a key development stage. ESO's VLTI has established a stable, robust infrastructure for long-baseline interferometry for general astronomical observers. The present second-generation instruments offer a wide wavelength coverage and improved performance. Their sensitivity and measurement accuracy lead to data and images of high reliability. Aims:We have developed MATISSE, the Multi AperTure mid-Infrared SpectroScopic Experiment, to access high resolution imaging in a wide spectral domain and explore topics such: stellar activity and mass loss; planet formation and evolution in the gas and dust disks around young stars; accretion processes around super massive black holes in AGN. Methods:The instrument is a spectro-interferometric imager covering three atmospheric bands (L,M,N) from 2.8 to 13.0 mu, combining four optical beams from the VLTI's telscopes. Its concept, related observing procedure, data reduction and calibration approach are the product of 30 years of instrumental research. The instrument utilizes a multi-axial beam combination that delivers spectrally dispersed fringes. The signal provides the following quantities at several spectral resolutions: photometric flux, coherent fluxes, visibilities, closure phases, wavelength differential visibilities and phases, and aperture-synthesis imaging. Results:We provide an overview of the physical principle of the instrument and its functionalities, the characteristics of the delivered signal, a description of the observing modes and of their performance limits. An ensemble of data and reconstructed images are illustrating the first acquired key observations. Conclusion:The instrument has been in operation at Cerro Paranal, ESO, Chile since 2018, and has been open for science use by the international community since April 2019. The first scientific results are being published now.
△ Less
Submitted 2 March, 2022; v1 submitted 29 October, 2021;
originally announced October 2021.
-
Colloidal Synthesis of Crystalline Aluminum Nanoparticles for UV Plasmonics
Authors:
Marion Castilla,
Silvère Schuermans,
Davy Gérard,
Jérôme Martin,
Thomas Maurer,
Uri Hananel,
Gil Markovich,
Jérôme Plain,
Julien Proust
Abstract:
Numerous applications of nanotechnologies rely on the wide availability of high-quality crystalline nanoparticles (NPs). Although the chemical synthesis of noble metal nanoparticles (gold and silver) is well mastered, pushing the optical response of metallic nanoparticles towards the ultraviolet requires other materials, such as aluminum. Although a few demonstrations of chemical synthesis of Al n…
▽ More
Numerous applications of nanotechnologies rely on the wide availability of high-quality crystalline nanoparticles (NPs). Although the chemical synthesis of noble metal nanoparticles (gold and silver) is well mastered, pushing the optical response of metallic nanoparticles towards the ultraviolet requires other materials, such as aluminum. Although a few demonstrations of chemical synthesis of Al nanoparticles have been reported so far, an elaboration path allowing for a wide range of NP size that is compatible with mass production has yet to be demonstrated. In this article, we report on the production of spherical, size-controlled crystalline Al NPs starting from commercial Al foils and without the use of a catalyst. The proposed method combines sonochemistry with solvochemistry and is fully up-scalable. The obtained NPs have a 10-100 nm crystalline Al core surrounded by a thin alumina shell, allowing long-term stability in ethanol. Well-defined plasmonic resonances in the UV and visible ranges are experimentally evidenced on single nanoparticles.
△ Less
Submitted 16 March, 2022; v1 submitted 4 October, 2021;
originally announced October 2021.
-
Adversarial Random Forest Classifier for Automated Game Design
Authors:
Thomas Maurer,
Matthew Guzdial
Abstract:
Autonomous game design, generating games algorithmically, has been a longtime goal within the technical games research field. However, existing autonomous game design systems have relied in large part on human-authoring for game design knowledge, such as fitness functions in search-based methods. In this paper, we describe an experiment to attempt to learn a human-like fitness function for autonom…
▽ More
Autonomous game design, generating games algorithmically, has been a longtime goal within the technical games research field. However, existing autonomous game design systems have relied in large part on human-authoring for game design knowledge, such as fitness functions in search-based methods. In this paper, we describe an experiment to attempt to learn a human-like fitness function for autonomous game design in an adversarial manner. While our experimental work did not meet our expectations, we present an analysis of our system and results that we hope will be informative to future autonomous game design research.
△ Less
Submitted 26 July, 2021;
originally announced July 2021.
-
Tailoring of Plasmonic Functionalized Metastructures to Enhance Local Heating Release
Authors:
Antonio Ferraro,
Giuseppe Emanuele Lio,
Abdelhamid Hmina,
Giovanna Palermo,
Thomas Maurer,
Roberto Caputo
Abstract:
Plasmonic nanoheaters are reported that produce a significant local heating when excited by a 532 nm wavelength focussed laser beam. A significant temperature increase derives from the strong confinement of electric field enabled by the specific arrangement of Au nanodisks constituting the nanoheater. The thermal response is much more sensitive when layering the gold nanoheaters by a thick layer o…
▽ More
Plasmonic nanoheaters are reported that produce a significant local heating when excited by a 532 nm wavelength focussed laser beam. A significant temperature increase derives from the strong confinement of electric field enabled by the specific arrangement of Au nanodisks constituting the nanoheater. The thermal response is much more sensitive when layering the gold nanoheaters by a thick layer of doped polymer, reaching a temperature variation of more than 250°C. The modulation of the excitation by a chopper enables the fine control of the thermal response with a measured maximum temperature variation of about 60°C in a single period. These intriguing features can be efficiently exploited for the design of novel systems finding application in nano medicine and nano chemistry
△ Less
Submitted 19 May, 2021;
originally announced May 2021.
-
Mid-infrared circumstellar emission of the long-period Cepheid l Carinae resolved with VLTI/MATISSE
Authors:
V. Hocdé,
N. Nardetto,
A. Matter,
E. Lagadec,
A. Mérand,
P. Cruzalèbes,
A. Meilland,
F. Millour,
B. Lopez,
P. Berio,
G. Weigelt,
R. Petrov,
J. W. Isbell,
W. Jaffe,
P. Kervella,
A. Glindemann,
M. Schöller,
F. Allouche,
A. Gallenne,
A. Domiciano de Souza,
G. Niccolini,
E. Kokoulina,
J. Varga,
S. Lagarde,
J. -C. Augereau
, et al. (129 additional authors not shown)
Abstract:
The nature of circumstellar envelopes (CSE) around Cepheids is still a matter of debate. The physical origin of their infrared (IR) excess could be either a shell of ionized gas, or a dust envelope, or both. This study aims at constraining the geometry and the IR excess of the environment of the long-period Cepheid $\ell$ Car (P=35.5 days) at mid-IR wavelengths to understand its physical nature. W…
▽ More
The nature of circumstellar envelopes (CSE) around Cepheids is still a matter of debate. The physical origin of their infrared (IR) excess could be either a shell of ionized gas, or a dust envelope, or both. This study aims at constraining the geometry and the IR excess of the environment of the long-period Cepheid $\ell$ Car (P=35.5 days) at mid-IR wavelengths to understand its physical nature. We first use photometric observations in various bands and Spitzer Space Telescope spectroscopy to constrain the IR excess of $\ell$ Car. Then, we analyze the VLTI/MATISSE measurements at a specific phase of observation, in order to determine the flux contribution, the size and shape of the environment of the star in the L band. We finally test the hypothesis of a shell of ionized gas in order to model the IR excess. We report the first detection in the L band of a centro-symmetric extended emission around l Car, of about 1.7$R_\star$ in FWHM, producing an excess of about 7.0\% in this band. In the N band, there is no clear evidence for dust emission from VLTI/MATISSE correlated flux and Spitzer data. On the other side, the modeled shell of ionized gas implies a more compact CSE ($1.13\pm0.02\,R_\star$) and fainter (IR excess of 1\% in the L band). We provide new evidences for a compact CSE of $\ell$ Car and we demonstrate the capabilities of VLTI/MATISSE for determining common properties of CSEs. While the compact CSE of $\ell$ Car is probably of gaseous nature, the tested model of a shell of ionized gas is not able to simultaneously reproduce the IR excess and the interferometric observations. Further Galactic Cepheids observations with VLTI/MATISSE are necessary for determining the properties of CSEs, which may also depend on both the pulsation period and the evolutionary state of the stars.
△ Less
Submitted 31 March, 2021;
originally announced March 2021.
-
Synthesis of metallic nanoparticles for heterogeneous catalysis: Application to the Direct Borohydride Fuel Cell
Authors:
Fabrice Asonkeng,
Gael Maranzana,
Julien Proust,
Manuel Francois,
Lea Le Joncour,
Jerome Dillet,
Sophie Didierjean,
Guillaume Braesh,
Marian Chatenet,
Thomas Maurer
Abstract:
Until now, the fabrication of electrocatalysts to guarantee long life of fuel cells and low consumption of noble metals remains a major challenge. The electrocatalysts based on metals or metal oxides which are used today are limited by the complexity of their synthesis processes and require several steps before depositing the catalysts on the substrate. Herein is described a chemical synthesis pro…
▽ More
Until now, the fabrication of electrocatalysts to guarantee long life of fuel cells and low consumption of noble metals remains a major challenge. The electrocatalysts based on metals or metal oxides which are used today are limited by the complexity of their synthesis processes and require several steps before depositing the catalysts on the substrate. Herein is described a chemical synthesis process that consists of a single-step synthesis and direct deposition of catalysts nanoparticles such as gold (Au), palladium (Pd) and platinum (Pt) in the thickness of a carbon-fibers-based porous transport layer (PTL). The synthesis process essentially consists of dissolving in the same PGMEA (Propylene glycol methyl ether acetate) solvent a metal precursor (HAuCl4 or PdNO2 or PtCl4) and a homopolymer PMMA (Polymethylmetacrylate), then the metal solution is deposited on the surface of the PTL after cleaning. Special emphasis is made on Pt-based materials. The obtained PTL-supported nanoparticles were firstly characterized by scanning electron microscopy (SEM) to evaluate their morphology, and then X-Ray diffraction (XRD) to observe the crystal phases. To validate the methodology, Pt-coated PTL materials have been used as anode for the borohydride oxidation reaction (BOR) in a direct borohydride fuel cell (DBFC) and compared to a state-of-the-art nickel electrode. There is an optimum loading of platinum (below 0.16 mg Pt/cm2) which constitutes the best compromise between power density and faradic efficiency for the borohydride oxidation reaction (BOR). Thanks to this low Pt loading, hydrogen evolved during the anodic reaction is completely valorized. These electrodes combine the advantages of high-performance with a very low metal loading, hence lowering materials cost.
△ Less
Submitted 25 March, 2021;
originally announced March 2021.
-
The asymmetric inner disk of the Herbig Ae star HD 163296 in the eyes of VLTI/MATISSE: evidence for a vortex?
Authors:
J. Varga,
M. Hogerheijde,
R. van Boekel,
L. Klarmann,
R. Petrov,
L. B. F. M. Waters,
S. Lagarde,
E. Pantin,
Ph. Berio,
G. Weigelt,
S. Robbe-Dubois,
B. Lopez,
F. Millour,
J. -C. Augereau,
H. Meheut,
A. Meilland,
Th. Henning,
W. Jaffe,
F. Bettonvil,
P. Bristow,
K. -H. Hofmann,
A. Matter,
G. Zins,
S. Wolf,
F. Allouche
, et al. (111 additional authors not shown)
Abstract:
Context. The inner few au region of planet-forming disks is a complex environment. High angular resolution observations have a key role in understanding the disk structure and the dynamical processes at work. Aims. In this study we aim to characterize the mid-infrared brightness distribution of the inner disk of the young intermediate-mass star HD 163296, from VLTI/MATISSE observations. Methods. W…
▽ More
Context. The inner few au region of planet-forming disks is a complex environment. High angular resolution observations have a key role in understanding the disk structure and the dynamical processes at work. Aims. In this study we aim to characterize the mid-infrared brightness distribution of the inner disk of the young intermediate-mass star HD 163296, from VLTI/MATISSE observations. Methods. We use geometric models to fit the data. Our models include a smoothed ring, a flat disk with inner cavity, and a 2D Gaussian. The models can account for disk inclination and for azimuthal asymmetries as well. We also perform numerical hydro-dynamical simulations of the inner edge of the disk. Results. Our modeling reveals a significant brightness asymmetry in the L-band disk emission. The brightness maximum of the asymmetry is located at the NW part of the disk image, nearly at the position angle of the semimajor axis. The surface brightness ratio in the azimuthal variation is $3.5 \pm 0.2$. Comparing our result on the location of the asymmetry with other interferometric measurements, we confirm that the morphology of the $r<0.3$ au disk region is time-variable. We propose that this asymmetric structure, located in or near the inner rim of the dusty disk, orbits the star. For the physical origin of the asymmetry, we tested a hypothesis where a vortex is created by Rossby wave instability, and we find that a unique large scale vortex may be compatible with our data. The half-light radius of the L-band emitting region is $0.33\pm 0.01$ au, the inclination is ${52^\circ}^{+5^\circ}_{-7^\circ}$, and the position angle is $143^\circ \pm 3^\circ$. Our models predict that a non-negligible fraction of the L-band disk emission originates inside the dust sublimation radius for $μ$m-sized grains. Refractory grains or large ($\gtrsim 10\ μ$m-sized) grains could be the origin for this emission.
△ Less
Submitted 10 December, 2020;
originally announced December 2020.
-
Multilevel coherences in quantum dots
Authors:
Martin T. Maurer,
Jürgen König,
Herbert Schoeller
Abstract:
We study transport through strongly interacting quantum dots with $N$ energy levels that are weakly coupled to generic multi-channel metallic leads. In the regime of coherent sequential tunneling, where level spacing and broadening are of the same order but small compared to temperature, we present a unified, $SU(N)$-invariant form of the kinetic equation for the reduced density matrix of the dot…
▽ More
We study transport through strongly interacting quantum dots with $N$ energy levels that are weakly coupled to generic multi-channel metallic leads. In the regime of coherent sequential tunneling, where level spacing and broadening are of the same order but small compared to temperature, we present a unified, $SU(N)$-invariant form of the kinetic equation for the reduced density matrix of the dot and the tunneling current. This is achieved by introducing the concept of flavor polarization for the dot and the reservoirs, and splitting the kinetic equation in terms of flavor accumulation, anisotropic flavor relaxation, as well as exchange-field- and detuning-induced flavor rotation. In particular, we identify the exchange field as the cause of negative differential conductance at off-resonance bias voltages appearing in generic quantum-dot models. To illustrate the notion of flavor polarization, we analyze the non-linear current through a triple quantum-dot device.
△ Less
Submitted 21 September, 2020; v1 submitted 12 April, 2020;
originally announced April 2020.
-
Phonon-Plasmon Interaction in Metal-Insulator-Metal Localized Surface Plasmon Systems
Authors:
Abdelali Mrabti,
Gaëtan Lévêque,
Rana Nicolas,
Thomas Maurer,
Pierre-Michel Adam,
Abdellatif Akjouj,
Yan Pennec,
Bahram Djafari-Rouhani
Abstract:
We investigate theoretically and numerically the coupling between elastic and localized surface plasmon modes in a system of gold nanocylinders separated from a thin gold film by a dielectric spacer of few nanometers thickness. That system supports plasmon modes confined in between the bottom of the nanocylinder and the top of the gold film, which arise from the formation of interference patterns…
▽ More
We investigate theoretically and numerically the coupling between elastic and localized surface plasmon modes in a system of gold nanocylinders separated from a thin gold film by a dielectric spacer of few nanometers thickness. That system supports plasmon modes confined in between the bottom of the nanocylinder and the top of the gold film, which arise from the formation of interference patterns by short-wavelength metal-insulator-metal propagating plasmon. First we present the plasmonic properties of the system though computer-simulated extinction spectra and field maps associated to the different optical modes. Next a simple analytical model is introduced, which allows to correctly reproduce the shape and wavelengths of the plasmon modes. This model is used to investigate the efficiency of the coupling between an elastic deformation and the plasmonic modes. In the last part of the paper, we present the full numerical simulations of the phononic properties of the system, and then compute the acousto-plasmonic coupling between the different plasmon modes and five acoustic modes of very different shape. The efficiency of the coupling is assessed first by evaluating the modulation of the resonance wavelength, which allows comparison with the analytical model, and finally in term of time-modulation of the transmission spectra on the full visible range, computed for realistic values of the deformation of the nanoparticle.
△ Less
Submitted 1 June, 2016;
originally announced June 2016.
-
Synthesis and SERS application of SiO2@Au nanoparticles
Authors:
Apurve Saini,
Thomas Maurer,
Irene Izquierdo Lorenzo,
Andre Ribeiro Santos,
Jérémie Beal,
Julie Goffard,
Davy Gérard,
Alexandre Vial,
Jérôme Plain
Abstract:
In this letter, we report a chemical route for synthesizing SiO2@Au core-shell nanoparticles. The process includes four steps: i) preparation of the silica cores, ii) grafting gold nanoparticles over SiO2 cores, iii) priming of the silica-coated gold nanoparticles with 2 and 10 nm gold colloids and finally iv) formation of complete shell. The optical extinction spectra were experimentally measured…
▽ More
In this letter, we report a chemical route for synthesizing SiO2@Au core-shell nanoparticles. The process includes four steps: i) preparation of the silica cores, ii) grafting gold nanoparticles over SiO2 cores, iii) priming of the silica-coated gold nanoparticles with 2 and 10 nm gold colloids and finally iv) formation of complete shell. The optical extinction spectra were experimentally measured and compared to numerical calculations in order to confirm the dimensions deduced from SEM images. Finally, the potential of such core-shell nanoparticles for biosensing was probed by means of Surface Enhanced Raman Scattering measurements and revealed higher sensitivities with much lower gold quantity of such core-shell nanoparticles compared to Au nanoparticles exhibiting similar diameters.
△ Less
Submitted 8 December, 2014;
originally announced December 2014.
-
Ordered arrays of magnetic nanowires investigated by polarized small-angle neutron scattering
Authors:
Thomas Maurer,
Sébastien Gautrot,
Frédéric Ott,
Grégory Chaboussant,
Fatih Zighem,
Laurent Cagnon,
Olivier Fruchart
Abstract:
Polarized small-angle neutron scattering (PSANS) experimental results obtained on arrays of ferromagnetic Co nanowires ($φ\approx13$ nm) embedded in self-organized alumina (Al$_{2}$O$_{3}$) porous matrices are reported. The triangular array of aligned nanowires is investigated as a function of the external magnetic field with a view to determine experimentally the real space magnetization…
▽ More
Polarized small-angle neutron scattering (PSANS) experimental results obtained on arrays of ferromagnetic Co nanowires ($φ\approx13$ nm) embedded in self-organized alumina (Al$_{2}$O$_{3}$) porous matrices are reported. The triangular array of aligned nanowires is investigated as a function of the external magnetic field with a view to determine experimentally the real space magnetization $\vec{M}(\vec{r})$ distribution inside the material during the magnetic hysteresis cycle. The observation of field-dependentSANSintensities allows us to characterize the influence of magnetostatic fields. The PSANS experimental data are compared to magnetostatic simulations. These results evidence that PSANS is a technique able to address real-space magnetization distributions in nanostructured magnetic systems. We show that beyond structural information (shape of the objects, two-dimensional organization) already accessible with nonpolarized SANS, using polarized neutrons as the incident beam provides information on the magnetic form factor and stray fields \textgreek{m}0Hd distribution in between nanowires.
△ Less
Submitted 27 July, 2014;
originally announced July 2014.
-
Single step synthesis and organization of gold colloids assisted by copolymer templates
Authors:
Aurelien Sarrazin,
Arthur Gontier,
Alexandre Plaud,
Jeremie Beal,
Helene Yockell-Lelievre,
Jean-Louis Bijeon,
Jerome Plain,
Pierre-Michel Adam,
Thomas Maurer
Abstract:
We report here an original single-step process for synthesis and self-organization of gold colloids by simply incorporating gold salts into a solution prepared with Polystyrene (PS) - Polymethylmethacrylate (PMMA) copolymer, thiolated PS and Propylene Glycol Methyl Ether Acetate (PGMEA) as solvent. The spin-coating and annealing of this solution allows then the formation of PS domains. Depending o…
▽ More
We report here an original single-step process for synthesis and self-organization of gold colloids by simply incorporating gold salts into a solution prepared with Polystyrene (PS) - Polymethylmethacrylate (PMMA) copolymer, thiolated PS and Propylene Glycol Methyl Ether Acetate (PGMEA) as solvent. The spin-coating and annealing of this solution allows then the formation of PS domains. Depending on the polymer concentration of the as-prepared solution, there can be either one or several gold nanoparticles (NPs) per PS domains. For high concentration of gold nanoparticles in PS domains, the coupling between plasmonic nanoparticles leads to the observation of second peak in the optical extinction spectrum. Such collective effect could be relevant for the development of optical strain sensors in the next future.
△ Less
Submitted 31 March, 2014;
originally announced March 2014.
-
Enhancing LSPR sensitivity of Au gratings through graphene coupling to Au film
Authors:
T. Maurer,
R. Nicolas,
G. Lévêque,
P. Subramanian,
J. Proust,
J. Béal,
S. Schuermans,
J. -P. Vilcot,
Z. Herro,
M. Kazan,
J. Plain,
R. Boukherroub,
A. Akjouj,
B. Djafari-Rouhani,
P. -M. Adam,
S. Szunerits
Abstract:
A particular interesting plasmonic system is that of metallic nanostructures interacting with metal films. As the LSPR behavior of gold nanostructures (Au NPs) on the top of a gold thin film is exquisitely sensitive to the spacer distance of the film-Au NPs, we investigate in the present work the influence of a few-layered graphene spacer on the LSPR behavior of the NPs. The idea is to evidence th…
▽ More
A particular interesting plasmonic system is that of metallic nanostructures interacting with metal films. As the LSPR behavior of gold nanostructures (Au NPs) on the top of a gold thin film is exquisitely sensitive to the spacer distance of the film-Au NPs, we investigate in the present work the influence of a few-layered graphene spacer on the LSPR behavior of the NPs. The idea is to evidence the role of few-layered graphene as one of the thinnest possible spacer. We first show that the coupling to the Au film induces a strong lowering at around 507nm and sharpening of the main LSPR of the Au NPs. Moreover, a blue shift in the main LSP resonance of about 13 nm is observed in the presence of a few-layered graphene spacer when compared to the case where gold nanostructures are directly linked to a gold thin film. Numerical simulations suggest that this LSP mode is dipolar and that the hot spots of the electric field are pushed to the top corners of the NPs, which makes it very sensitive to surrounding medium optical index changes and thus appealing for sensing applications. A figure of merit (FoM) of such a system (gold/graphene/ Au NPs) is 2.8, as compared to 2.1 for gold/Au NPs either a 33% sensitivity gain and opens up new sensing strategies.
△ Less
Submitted 19 November, 2013;
originally announced November 2013.
-
Copolymer template control of gold nanoparticle synthesis via thermal annealing
Authors:
A. Plaud,
A. Sarrazin,
J. Béal,
J. Proust,
P. Royer,
J. -L. Bijeon,
J. Plain,
P. -M. Adam,
T. Maurer
Abstract:
We present here an original process combining top-down and bottom-up approaches by annealing a thin gold film evaporated onto a hole template made by etching a PS-PMMA copolymer film. Such process allows a better control of the gold nanoparticle size distribution which provides a sharper localized surface plasmon resonance. This makes such route appealing for sensing applications since the figure…
▽ More
We present here an original process combining top-down and bottom-up approaches by annealing a thin gold film evaporated onto a hole template made by etching a PS-PMMA copolymer film. Such process allows a better control of the gold nanoparticle size distribution which provides a sharper localized surface plasmon resonance. This makes such route appealing for sensing applications since the figure of merit of the Au nanoparticles obtained after thermal evaporation is more than doubled. Such process could besides allow tuning the localized surface plasmon resonance by using copolymer with various molecular weights and thus be attractive for surface enhanced raman spectroscopy.
△ Less
Submitted 31 October, 2013;
originally announced October 2013.
-
Optical determination and identification of organic shells around nanoparticles: application to silver nanoparticles
Authors:
T. Maurer,
N. Abdellaoui,
A. Gwiazda,
P. -M. Adam,
A. Vial,
J. -L. Bijeon,
D. Chaumont,
M. Bourezzou
Abstract:
We present a simple method to prove the presence of an organic shell around silver nanoparticles. This method is based on the comparison between optical extinction measurements of isolated nanoparticles and Mie calculations predicting the expected wavelength of the Localized Surface Plasmon Resonance of the nanoparticles with and without the presence of an organic layer. This method was applied to…
▽ More
We present a simple method to prove the presence of an organic shell around silver nanoparticles. This method is based on the comparison between optical extinction measurements of isolated nanoparticles and Mie calculations predicting the expected wavelength of the Localized Surface Plasmon Resonance of the nanoparticles with and without the presence of an organic layer. This method was applied to silver nanoparticles which seemed to be well protected from oxidation. Further experimental characterization via Surface Enhanced Raman Spectroscopy (SERS) measurements allowed to identify this protective shell as ethylene glycol. Combining LSPR and SERS measurements could thus give proof of both presence and identification for other plasmonic nanoparticles surrounded by organic shells.
△ Less
Submitted 26 April, 2013;
originally announced April 2013.
-
Optical properties of Au colloids self-organized into rings via copolymer templates
Authors:
S. Lamarre,
A. Sarrazin,
J. Proust,
H. Yockell-Lelièvre,
J. Plain,
A. M. Ritcey,
T. Maurer
Abstract:
The investigation of the Localized Surface Plasmon Resonance for plasmonic nanoparticles has opened new perspectives for optical nanosensors. Today, an issue in plasmonics is the development of large scale and low cost devices. We focus here on the Langmuir-Blodgett technique to self-organize gold nanoparticles (~ 7 nm) into rings (~ 60 nm) via polystyrene-b-polymethylmethacrylate templates. In pa…
▽ More
The investigation of the Localized Surface Plasmon Resonance for plasmonic nanoparticles has opened new perspectives for optical nanosensors. Today, an issue in plasmonics is the development of large scale and low cost devices. We focus here on the Langmuir-Blodgett technique to self-organize gold nanoparticles (~ 7 nm) into rings (~ 60 nm) via polystyrene-b-polymethylmethacrylate templates. In particular, we investigated the optical properties of organized gold nanoparticle rings over large areas and report experimental evidence for plasmon resonances of both individual nanoparticles and collective modes. This paves the way for designing devices with multiple resonances in the visible-Infra-red spectrum and develo** optical sensors.
△ Less
Submitted 19 April, 2013;
originally announced April 2013.
-
Numerical calculation of magnetic form factors of complex shape nano-particles coupled with micromagnetic simulations
Authors:
Fatih Zighem,
Frédéric Ott,
Thomas Maurer,
Grégory Chaboussant,
Jean-Yves Piquemal,
Guillaume Viau
Abstract:
We investigate the calculation of the magnetic form factors of nano-objects with complex geometrical shapes and non homogeneous magnetization distributions. We describe a numerical procedure which allows to calculate the 3D magnetic form factor of nano-objects from realistic magnetization distributions obtained by micromagnetic calculations. This is illustrated in the canonical cases of spheres, r…
▽ More
We investigate the calculation of the magnetic form factors of nano-objects with complex geometrical shapes and non homogeneous magnetization distributions. We describe a numerical procedure which allows to calculate the 3D magnetic form factor of nano-objects from realistic magnetization distributions obtained by micromagnetic calculations. This is illustrated in the canonical cases of spheres, rods and platelets. This work is a first step towards a 3D vectorial reconstruction of the magnetization at the nanometric scale using neutron scattering techniques.
△ Less
Submitted 4 April, 2013;
originally announced April 2013.
-
High temperature structural and magnetic properties of cobalt nanowires
Authors:
Kahina Ait Atmane,
Fatih Zighem,
Yaghoub Soumare,
Mona Ibrahim,
Rym Boubekri,
Thomas Maurer,
Jérémie Margueritat,
Jean-Yves Piquemal,
Frédéric Ott,
Grégory Chaboussant,
Frédéric Schoenstein,
Noureddine Jouini,
Guillaume Viau
Abstract:
We present in this paper the structural and magnetic properties of high aspect ratio Co nanoparticles (~10) at high temperatures (up to 623 K) using in situ X ray diffraction (XRD) and SQUID characterizations. We show that the anisotropic shapes, the structural and texture properties are preserved up to 500 K. The coercivity can be modelled by u0Hc=2(Kmc+Kshape)/Ms with Kmc the magnetocrystalline…
▽ More
We present in this paper the structural and magnetic properties of high aspect ratio Co nanoparticles (~10) at high temperatures (up to 623 K) using in situ X ray diffraction (XRD) and SQUID characterizations. We show that the anisotropic shapes, the structural and texture properties are preserved up to 500 K. The coercivity can be modelled by u0Hc=2(Kmc+Kshape)/Ms with Kmc the magnetocrystalline anisotropy constant, Kshape the shape anisotropy constant and Ms the saturation magnetization. Hc decreases linearly when the temperature is increased due to the loss of the Co magnetocrystalline anisotropy contribution. At 500K, 50% of the room temperature coercivity is preserved corresponding to the shape anisotropy contribution only. We show that the coercivity drop is reversible in the range 300 - 500 K in good agreement with the absence of particle alteration. Above 525 K, the magnetic properties are irreversibly altered either by sintering or by oxidation.
△ Less
Submitted 28 August, 2012; v1 submitted 21 August, 2012;
originally announced August 2012.
-
Axial charges of excited nucleons from CI-fermions
Authors:
T. Maurer,
T. Burch,
L. Ya. Glozman,
C. B. Lang,
D. Mohler,
A. Schäfer
Abstract:
We report lattice QCD results on the axial charges of ground and excited nucleon states of both parities. This is the first study of these quantities with approximately chiral (CI) fermions. Two energy levels in the range of the negative parity resonances N*(1535) and N*(1650) are observed and we determine the axial charge for both. We obtain a small axial charge for one of them, which is consiste…
▽ More
We report lattice QCD results on the axial charges of ground and excited nucleon states of both parities. This is the first study of these quantities with approximately chiral (CI) fermions. Two energy levels in the range of the negative parity resonances N*(1535) and N*(1650) are observed and we determine the axial charge for both. We obtain a small axial charge for one of them, which is consistent with the chiral symmetry restoration in this state as well as with the small axial charge of the N*(1535) predicted within the quark model. This result agrees with the findings of Takahashi et al. obtained with Wilson quarks which violate chiral symmetry for finite lattice spacing. At the same time for the other observed negative parity state we obtain a large axial charge, that is close to the axial charge of the nucleon. This is in disagreement both with the quark model prediction as well as with the chiral restoration but allows for an interpretation as an s-wave π N state.
△ Less
Submitted 13 February, 2012;
originally announced February 2012.
-
Dipolar interactions in magnetic nanowires aggregates
Authors:
Thomas Maurer,
Fatih Zighem,
Weiqing Fang,
Frédéric Ott,
Grégory Chaboussant,
Yaghoub Soumare,
Kahina Ait Atmane,
Jean-Yves Piquemal,
Guillaume Viau
Abstract:
We investigate the role of dipolar interactions on the magnetic properties of nanowires aggregates. Micromagnetic simulations show that dipolar interactions between wires are not detrimental to the high coercivity properties of magnetic nanowires composites even in very dense aggregates. This is confirmed by experimental magnetization measurements and Henkel plots which show that the dipolar inter…
▽ More
We investigate the role of dipolar interactions on the magnetic properties of nanowires aggregates. Micromagnetic simulations show that dipolar interactions between wires are not detrimental to the high coercivity properties of magnetic nanowires composites even in very dense aggregates. This is confirmed by experimental magnetization measurements and Henkel plots which show that the dipolar interactions are small. Indeed, we show that misalignment of the nanowires in aggregates leads to a coercivity reduction of only 30%. Direct dipolar interactions between nanowires, even as close as 2 nm, have small effects (maximum coercivity reduction of ~15%) and are very sensitive to the detailed geometrical arrangement of wires. These results strenghten the potential of magnetic composite materials based on elongated single domain particles for the fabrication of permanent magnetic materials.
△ Less
Submitted 14 September, 2011;
originally announced September 2011.
-
Dipolar interactions in arrays of ferromagnetic nanowires: a micromagnetic study
Authors:
Fatih Zighem,
Thomas Maurer,
Frédéric Ott,
Grégory Chaboussant
Abstract:
We explore the behavior of periodic arrays of magnetic nanowires by micromagnetic simulations using the Nmag modeling package. A large number of modeling studies on such arrays of nanowires have been performed using finite size models. We show that these finite size micromagnetic descriptions can only be used in specific situations. We perform a systematic study of more or less dense 1D and 2D arr…
▽ More
We explore the behavior of periodic arrays of magnetic nanowires by micromagnetic simulations using the Nmag modeling package. A large number of modeling studies on such arrays of nanowires have been performed using finite size models. We show that these finite size micromagnetic descriptions can only be used in specific situations. We perform a systematic study of more or less dense 1D and 2D arrays of nanowires using either finite size or infinite size models and we show that finite size models fail to capture some of the features of real infinite systems. We show that that the mean field model scaled to the system porosity is valid. This work can be used as a basis to the extension of micromagnetic calculations of the magnetization dynamics in arrays of nanowires.
△ Less
Submitted 24 October, 2010; v1 submitted 1 August, 2010;
originally announced August 2010.
-
QPACE -- a QCD parallel computer based on Cell processors
Authors:
H. Baier,
H. Boettiger,
M. Drochner,
N. Eicker,
U. Fischer,
Z. Fodor,
A. Frommer,
C. Gomez,
G. Goldrian,
S. Heybrock,
D. Hierl,
M. Hüsken,
T. Huth,
B. Krill,
J. Lauritsen,
T. Lippert,
T. Maurer,
B. Mendl,
N. Meyer,
A. Nobile,
I. Ouda,
M. Pivanti,
D. Pleiter,
M. Ries,
A. Schäfer
, et al. (10 additional authors not shown)
Abstract:
QPACE is a novel parallel computer which has been developed to be primarily used for lattice QCD simulations. The compute power is provided by the IBM PowerXCell 8i processor, an enhanced version of the Cell processor that is used in the Playstation 3. The QPACE nodes are interconnected by a custom, application optimized 3-dimensional torus network implemented on an FPGA. To achieve the very hig…
▽ More
QPACE is a novel parallel computer which has been developed to be primarily used for lattice QCD simulations. The compute power is provided by the IBM PowerXCell 8i processor, an enhanced version of the Cell processor that is used in the Playstation 3. The QPACE nodes are interconnected by a custom, application optimized 3-dimensional torus network implemented on an FPGA. To achieve the very high packaging density of 26 TFlops per rack a new water cooling concept has been developed and successfully realized. In this paper we give an overview of the architecture and highlight some important technical details of the system. Furthermore, we provide initial performance results and report on the installation of 8 QPACE racks providing an aggregate peak performance of 200 TFlops.
△ Less
Submitted 23 December, 2009; v1 submitted 11 November, 2009;
originally announced November 2009.
-
Exchange bias in Co/CoO core-shell nanowires: Role of the antiferromagnetic superparamagnetic fluctuations
Authors:
Thomas Maurer,
Fatih Zighem,
Frederic Ott,
Gregory Chaboussant,
Gilles Andre,
Yaghoub Soumare,
Jean-Yves Piquemal,
Guillaume Viau,
Christophe Gatel
Abstract:
The magnetic properties of Co (<D>=15 nm, <L>=130nm) nanowires are reported. In oxidized wires, we measure large exchange bias fields of the order of 0.1 T below T ~ 100 K. The onset of the exchange bias, between the ferromagnetic core and the anti-ferromagnetic CoO shell, is accompanied by a coercivity drop of 0.2 T which leads to a minimum in coercivity at $\sim100$ K. Magnetization relaxation…
▽ More
The magnetic properties of Co (<D>=15 nm, <L>=130nm) nanowires are reported. In oxidized wires, we measure large exchange bias fields of the order of 0.1 T below T ~ 100 K. The onset of the exchange bias, between the ferromagnetic core and the anti-ferromagnetic CoO shell, is accompanied by a coercivity drop of 0.2 T which leads to a minimum in coercivity at $\sim100$ K. Magnetization relaxation measurements show a temperature dependence of the magnetic viscosity S which is consistent with a volume distribution of the CoO grains at the surface. We propose that the superparamagnetic fluctuations of the anti-ferromagnetic CoO shell play a key role in the flip** of the nanowire magnetization and explain the coercivity drop. This is supported by micromagnetic simulations. This behavior is specific to the geometry of a 1D system which possesses a large shape anisotropy and was not previously observed in 0D (spheres) or 2D (thin films) systems which have a high degree of symmetry and low coercivities. This study underlines the importance of the AFM super-paramagnetic fluctuations in the exchange bias mechanism.
△ Less
Submitted 31 August, 2009; v1 submitted 3 May, 2009;
originally announced May 2009.
-
Comparison of filtering methods in SU(3) lattice gauge theory
Authors:
F. Bruckmann,
F. Gruber,
C. B. Lang,
M. Limmer,
T. Maurer,
A. Schäfer,
S. Solbrig
Abstract:
We systematically compare filtering methods used to extract topological excitations from lattice gauge configurations. We show that there is a strong correlation of the topological charge densities obtained by APE and Stout smearing. Furthermore, a first quantitative analysis of quenched and dynamical configurations reveals a crucial difference of their topological structure: the topological cha…
▽ More
We systematically compare filtering methods used to extract topological excitations from lattice gauge configurations. We show that there is a strong correlation of the topological charge densities obtained by APE and Stout smearing. Furthermore, a first quantitative analysis of quenched and dynamical configurations reveals a crucial difference of their topological structure: the topological charge density is more fragmented, when dynamical quarks are present. This fact also implies that smearing has to be handled with great care, not to destroy these characteristic structures.
△ Less
Submitted 15 January, 2009;
originally announced January 2009.
-
Status of the QPACE Project
Authors:
H. Baier,
H. Boettiger,
M. Drochner,
N. Eicker,
U. Fischer,
Z. Fodor,
G. Goldrian,
S. Heybrock,
D. Hierl,
T. Huth,
B. Krill,
J. Lauritsen,
T. Lippert,
T. Maurer,
J. McFadden,
N. Meyer,
A. Nobile,
I. Ouda,
M. Pivanti,
D. Pleiter,
A. Schäfer,
H. Schick,
F. Schifano,
H. Simma,
S. Solbrig
, et al. (5 additional authors not shown)
Abstract:
We give an overview of the QPACE project, which is pursuing the development of a massively parallel, scalable supercomputer for LQCD. The machine is a three-dimensional torus of identical processing nodes, based on the PowerXCell 8i processor. The nodes are connected by an FPGA-based, application-optimized network processor attached to the PowerXCell 8i processor. We present a performance analys…
▽ More
We give an overview of the QPACE project, which is pursuing the development of a massively parallel, scalable supercomputer for LQCD. The machine is a three-dimensional torus of identical processing nodes, based on the PowerXCell 8i processor. The nodes are connected by an FPGA-based, application-optimized network processor attached to the PowerXCell 8i processor. We present a performance analysis of lattice QCD codes on QPACE and corresponding hardware benchmarks.
△ Less
Submitted 9 October, 2008;
originally announced October 2008.
-
Spectroscopy with dynamical Chirally Improved quarks
Authors:
Christof Gattringer,
C. B. Lang,
Markus Limmer,
Thilo Maurer,
Daniel Mohler,
Andreas Schäfer
Abstract:
We present recent results of our dynamical simulations with Chirally Improved fermions and report on new developments in the determination of excited light-quark meson states using interpolators constructed by applying covariant derivatives on Jacobi-smeared quark sources within the framework of the variational method.
We present recent results of our dynamical simulations with Chirally Improved fermions and report on new developments in the determination of excited light-quark meson states using interpolators constructed by applying covariant derivatives on Jacobi-smeared quark sources within the framework of the variational method.
△ Less
Submitted 25 September, 2008;
originally announced September 2008.
-
Magnetic nanowires as permanent magnet materials
Authors:
T. Maurer,
F. Ott,
G. Chaboussant,
Y. Soumare,
J. -Y. Piquemal,
G. Viau
Abstract:
We present the fabrication of metallic magnetic nanowires using a low temperature chemical process. We show that pressed powders and magnetically oriented samples exhibit a very high coercivity (6.5 kOe at 140 K and 4.8 kOe at 300 K). We discuss the magnetic properties of these metamaterials and show that they have the suitable properties to realize "high temperature magnets" competitive with Al…
▽ More
We present the fabrication of metallic magnetic nanowires using a low temperature chemical process. We show that pressed powders and magnetically oriented samples exhibit a very high coercivity (6.5 kOe at 140 K and 4.8 kOe at 300 K). We discuss the magnetic properties of these metamaterials and show that they have the suitable properties to realize "high temperature magnets" competitive with AlNiCo or SmCo permanent magnets. They could also be used as recording media for high density magnetic recording.
△ Less
Submitted 13 November, 2007;
originally announced November 2007.
-
QCD on the Cell Broadband Engine
Authors:
F. Belletti,
G. Bilardi,
M. Drochner,
N. Eicker,
Z. Fodor,
D. Hierl,
H. Kaldass,
T. Lippert,
T. Maurer,
N. Meyer,
A. Nobile,
D. Pleiter,
A. Schaefer,
F. Schifano,
H. Simma,
S. Solbrig,
T. Streuer,
R. Tripiccione,
T. Wettig
Abstract:
We evaluate IBM's Enhanced Cell Broadband Engine (BE) as a possible building block of a new generation of lattice QCD machines. The Enhanced Cell BE will provide full support of double-precision floating-point arithmetics, including IEEE-compliant rounding. We have developed a performance model and applied it to relevant lattice QCD kernels. The performance estimates are supported by micro- and…
▽ More
We evaluate IBM's Enhanced Cell Broadband Engine (BE) as a possible building block of a new generation of lattice QCD machines. The Enhanced Cell BE will provide full support of double-precision floating-point arithmetics, including IEEE-compliant rounding. We have developed a performance model and applied it to relevant lattice QCD kernels. The performance estimates are supported by micro- and application-benchmarks that have been obtained on currently available Cell BE-based computers, such as IBM QS20 blades and PlayStation 3. The results are encouraging and show that this processor is an interesting option for lattice QCD applications. For a massively parallel machine on the basis of the Cell BE, an application-optimized network needs to be developed.
△ Less
Submitted 12 October, 2007;
originally announced October 2007.
-
Dynamical Chirally Improved Quarks: First Results for Hadron Masses
Authors:
R. Frigori,
Ch. Gattringer,
C. B. Lang,
M. Limmer,
T. Maurer,
D. Mohler,
A. Schäfer
Abstract:
We present first results for a study with two mass-degenerate dynamical Chirally Improved (CI) fermions on lattices of spatial extent 2.4 fm. The CI Dirac operator obeys the Ginsparg-Wilson condition in good approximation. The pion mass we use is still large O(470 MeV) for the 16**3*32 lattices with lattice spacing of 0.15 fm. The hadron masses are obtained with the variational technique and the…
▽ More
We present first results for a study with two mass-degenerate dynamical Chirally Improved (CI) fermions on lattices of spatial extent 2.4 fm. The CI Dirac operator obeys the Ginsparg-Wilson condition in good approximation. The pion mass we use is still large O(470 MeV) for the 16**3*32 lattices with lattice spacing of 0.15 fm. The hadron masses are obtained with the variational technique and the results compared with earlier quenched calculations with similar lattice parameters. We find indications for the isovector, scalar meson a0(980) near the experimental value, in contradistinction to quenched results which always produced a mass value compatible with the first excitation a0(1450).
△ Less
Submitted 28 September, 2007;
originally announced September 2007.
-
B meson excitations with chirally improved light quarks
Authors:
T. Burch,
D. Chakrabarti,
C. Hagen,
C. B. Lang,
M. Limmer,
T. Maurer,
A. Schäfer
Abstract:
We present our latest results for the excitations of static-light mesons on both quenched and unquenched lattices, where the light quarks are simulated using the chirally improved (CI) lattice Dirac operator.
We present our latest results for the excitations of static-light mesons on both quenched and unquenched lattices, where the light quarks are simulated using the chirally improved (CI) lattice Dirac operator.
△ Less
Submitted 24 September, 2007;
originally announced September 2007.
