-
Influence of the coating brittleness on the thermomechanical fatigue behavior of a $β$-NiAl coated R125 Ni-based superalloy
Authors:
Capucine Billard,
Damien Texier,
Matthieu Rambaudon,
Jean-Christophe Teissedre,
Noureddine Bourhila,
Dimitri Marquie,
Lionel Marcin,
Hugo Singer,
Vincent Maurel
Abstract:
The brittleness of an aluminide diffusion coating protecting a René 125 Ni-based polycrystalline superalloy was investigated over a wide range of temperatures in its as-received and thermally aged form. Isothermal and thermal cycled aging were performed on the coated system at a maximum temperature of 1100 °C. Microstructure evolutions and damage initiation within the coating were characterized. I…
▽ More
The brittleness of an aluminide diffusion coating protecting a René 125 Ni-based polycrystalline superalloy was investigated over a wide range of temperatures in its as-received and thermally aged form. Isothermal and thermal cycled aging were performed on the coated system at a maximum temperature of 1100 °C. Microstructure evolutions and damage initiation within the coating were characterized. Interrupted tensile tests and thermomechanical fatigue tests were conducted to document critical stress-strain conditions leading to the coating cracking and lifetime for the case of thermo-mechanical fatigue loading. Advanced digital image correlation and acoustic emission techniques were used to detect coating cracking. Isothermal oxidation or cyclic oxidation led to improved strain-to-failure due to metallurgical evolutions and also longer fatigue life under thermomechanical fatigue conditions.
△ Less
Submitted 18 June, 2024;
originally announced June 2024.
-
Effect of free surface, oxide and coating layers on rafting in $γ-γ'$ superalloys
Authors:
Wajih Jbara,
Vincent Maurel,
Kais Ammar,
Samuel Forest
Abstract:
Complex microstructure evolution has been observed \rev{both bare and coated } Ni-based single crystal superalloys. Rafting and $γ'$ depletion are investigated in this study through a brief experimental analysis and a detailed phase field model to account for mechanical-diffusion coupling. The proposed model has been implemented in a finite element code. As a main result, it is shown that rafting,…
▽ More
Complex microstructure evolution has been observed \rev{both bare and coated } Ni-based single crystal superalloys. Rafting and $γ'$ depletion are investigated in this study through a brief experimental analysis and a detailed phase field model to account for mechanical-diffusion coupling. The proposed model has been implemented in a finite element code. As a main result, it is shown that rafting, $γ'$ depletion close to free surface/oxide layer or $γ'$ coalescence close to coating layer, and mechanical behavior are strongly coupled. The local additional flux of Al explains this coupling to a large extent. Finally, a discussion of strain localization and local flux of Al paves the way for clarification of these cases that degrade the performance of superalloys.
△ Less
Submitted 18 June, 2024;
originally announced June 2024.
-
Thermal Barrier Coatings in burner rig experiment analyzed through LAser Shock for DAmage Monitoring (LASDAM) method
Authors:
Lara Mahfouz,
Vincent Maurel,
Vincent Guipont,
Basile Marchand,
Rami El Hourany,
Florent Coudon,
Daniel E. Mack,
Robert Vaßen
Abstract:
This study investigates failure mechanisms in a typical thermal barrier coating (TBC) system comprising an EB-PVD columnar top coat, an aluminide bond coat, and a Ni-based single crystal superalloy substrate, simulating gas turbine operating conditions using a burner rig. TBC degradation, initiated by interfacial defects from the LASAT method, was studied during thermal gradient cycling under fast…
▽ More
This study investigates failure mechanisms in a typical thermal barrier coating (TBC) system comprising an EB-PVD columnar top coat, an aluminide bond coat, and a Ni-based single crystal superalloy substrate, simulating gas turbine operating conditions using a burner rig. TBC degradation, initiated by interfacial defects from the LASAT method, was studied during thermal gradient cycling under fast and slow cooling. In-situ optical and infrared imaging, along with ex-situ SEM cross-sectional analysis, monitored failure mechanisms. The Laser Shock for Damage Monitoring (LASDAM) technique provided insights into gradient and cooling rate impacts on columnar TBC damage. Results showed significant effects of cooling rate on delamination and localized failure at blister sites, with LASDAM revealing significant overheating at damage sites. Analysis included full-field temperature and damage assessment, emphasizing blister-driven delamination under severe thermal gradients. Discussion focused on elastic stored energy effects, noting that fast cooling induced transient conditions where reversed temperature gradients increased damage, limiting TBC lifespan
△ Less
Submitted 29 April, 2024; v1 submitted 9 April, 2024;
originally announced April 2024.
-
A plastic correction algorithm for full-field elasto-plastic finite element simulations : critical assessment of predictive capabilities and improvement by machine learning
Authors:
Abhishek Palchoudhary,
Simone Peter,
Vincent Maurel,
Cristian Ovalle,
Pierre Kerfriden
Abstract:
This paper introduces a new local plastic correction algorithm developed to accelerate finite element simulations for structures with elasto-plastic constitutive laws. The proposed method belongs to the category of generalized multiaxial Neuber-type methods enabled by pointwise proportional evolution rules. The algorithm numerically integrates J2 plasticity laws as a function of the finite element…
▽ More
This paper introduces a new local plastic correction algorithm developed to accelerate finite element simulations for structures with elasto-plastic constitutive laws. The proposed method belongs to the category of generalized multiaxial Neuber-type methods enabled by pointwise proportional evolution rules. The algorithm numerically integrates J2 plasticity laws as a function of the finite element elastic response of the structure, to obtain full-field 3D elasto-plastic quantities for any proportionally applied loading. Examples of the numerical capabilities of this algorithm are shown on a structure containing a distribution of pores, for monotonic and fatigue loading. The approximation errors due to the proposed local plastic correction are also investigated. As a second point of innovation, we show that the proposed local plastic correction can be accelerated when dealing with large-scale structures by employing a simple meta-model, with virtually no added errors. Finally, we develop and investigate the merits of an additional deep-learning-based corrective layer to reduce approximations errors on a subset of structures for which full elasto-plastic FE simulations are performed, the solutions of which are subsequently used as training set for a Convolutional Neural Network algorithm designed to learn the error between full FE and plastic correction approximations.
△ Less
Submitted 9 February, 2024;
originally announced February 2024.
-
The valley Nernst effect in WSe$_2$
Authors:
Minh-Tuan Dau,
Céline Vergnaud,
Alain Marty,
Cyrille Beigné,
Serge Gambarelli,
Vincent Maurel,
Timothée Journot,
Bérangère Hyot,
Thomas Guillet,
Benjamin Grévin,
Hanako Okuno,
Matthieu Jamet
Abstract:
The Hall effect can be extended by inducing a temperature gradient in lieu of electric field that is known as the Nernst (-Ettingshausen) effect. The recently discovered spin Nernst effect in heavy metals continues to enrich the picture of Nernst effect-related phenomena. However, the collection would not be complete without mentioning the valley degree of freedom benchmarked by the observation of…
▽ More
The Hall effect can be extended by inducing a temperature gradient in lieu of electric field that is known as the Nernst (-Ettingshausen) effect. The recently discovered spin Nernst effect in heavy metals continues to enrich the picture of Nernst effect-related phenomena. However, the collection would not be complete without mentioning the valley degree of freedom benchmarked by the observation of the valley Hall effect. Here we show the experimental evidence of its missing counterpart, the valley Nernst effect. Using millimeter-sized WSe$_{2}$ mono-multi-layers and the ferromagnetic resonance-spin pum** technique, we are able to apply a temperature gradient by off-centering the sample in the radio frequency cavity and address a single valley through spin-valley coupling. The combination of a temperature gradient and the valley polarization leads to the valley Nernst effect in WSe$_{2}$ that we detect electrically at room temperature. The valley Nernst coefficient is in very good agreement with the predicted value.
△ Less
Submitted 17 October, 2019;
originally announced October 2019.
-
Negligible thermal contributions to the spin pum** signal in ferromagnetic metal-Platinum bilayers
Authors:
Paul Noël,
Maxen Cosset-Cheneau,
Victor Haspot,
Vincent Maurel,
Christian Lombard,
Manuel Bibes,
Agnès Barthelemy,
Laurent Vila,
Jean-Philippe Attané
Abstract:
Spin pum** by ferromagnetic resonance is one of the most common technique to determine spin hall angles, Edelstein lengths or spin diffusion lengths of a large variety of materials. In recent years, rising concerns have appeared regarding the interpretation of these experiments, underlining that the signal could arise purely from thermoelectric effects, rather than from coherent spin pum**. He…
▽ More
Spin pum** by ferromagnetic resonance is one of the most common technique to determine spin hall angles, Edelstein lengths or spin diffusion lengths of a large variety of materials. In recent years, rising concerns have appeared regarding the interpretation of these experiments, underlining that the signal could arise purely from thermoelectric effects, rather than from coherent spin pum**. Here, we propose a method to evaluate the presence or absence of thermal effects in spin pum** signals, by combining bolometry and spin pum** by ferromagnetic resonance measurements, and comparing their timescale. Using a cavity to perform the experiments on Pt\Permalloy and La0.7Sr0.3MnO3\Pt samples, we conclude on the absence of any measurable thermoelectric contribution such as the spin Seebeck and anomalous Nernst effects at resonance
△ Less
Submitted 13 April, 2020; v1 submitted 2 May, 2019;
originally announced May 2019.
-
Large enhancement of the spin Hall effect in Au by scattering with side-jump on Ta impurities
Authors:
P. Laczkowski,
Y. Fu,
H. Yang,
J. -C. Rojas-Sánchez,
P. Noel,
V. T. Pham,
G. Zahnd,
C. Deranlot,
S. Collin,
C. Bouard,
P. Warin,
V. Maurel,
M. Chshiev,
A. Marty,
J. -P. Attané,
A. Fert,
H. Jaffrès,
L. Vila,
J. -M. George
Abstract:
We present measurements of the Spin Hall Effect (SHE) in AuW and AuTa alloys for a large range of W or Ta concentrations by combining experiments on lateral spin valves and Ferromagnetic-Resonance/spin pum** technique. The main result is the identification of a large enhancement of the Spin Hall Angle (SHA) by the side-jump mechanism on Ta impurities, with a SHA as high as + 0.5 (i.e $50\%$) for…
▽ More
We present measurements of the Spin Hall Effect (SHE) in AuW and AuTa alloys for a large range of W or Ta concentrations by combining experiments on lateral spin valves and Ferromagnetic-Resonance/spin pum** technique. The main result is the identification of a large enhancement of the Spin Hall Angle (SHA) by the side-jump mechanism on Ta impurities, with a SHA as high as + 0.5 (i.e $50\%$) for about 10\% of Ta. In contrast the SHA in AuW does not exceed + 0.15 and can be explained by intrinsic SHE of the alloy without significant extrinsic contribution from skew or side-jump scattering by W impurities. The AuTa alloys, as they combine a very large SHA with a moderate resistivity (smaller than $85\,μΩ.cm$), are promising for spintronic devices exploiting the SHE.
△ Less
Submitted 30 August, 2017;
originally announced August 2017.
