Showing 1–50 of 96 results for author: Matthaiou, M

RIS-aided MIMO Beamforming: Piece-Wise Near-field Channel Model

Authors: Weijian Chen, Zai Yang, Zhiqiang Wei, Derrick Wing Kwan Ng, Michail Matthaiou

Abstract: This paper proposes a joint active and passive beamforming design for reconfigurable intelligent surface (RIS)-aided wireless communication systems, adopting a piece-wise near-field channel model. While a traditional near-field channel model, applied without any approximations, offers higher modeling accuracy than a far-field model, it renders the system design more sensitive to channel estimation… ▽ More This paper proposes a joint active and passive beamforming design for reconfigurable intelligent surface (RIS)-aided wireless communication systems, adopting a piece-wise near-field channel model. While a traditional near-field channel model, applied without any approximations, offers higher modeling accuracy than a far-field model, it renders the system design more sensitive to channel estimation errors (CEEs). As a remedy, we propose to adopt a piece-wise near-field channel model that leverages the advantages of the near-field approach while enhancing its robustness against CEEs. Our study analyzes the impact of different channel models, including the traditional near-field, the proposed piece-wise near-field and far-field channel models, on the interference distribution caused by CEEs and model mismatches. Subsequently, by treating the interference as noise, we formulate a joint active and passive beamforming design problem to maximize the spectral efficiency (SE). The formulated problem is then recast as a mean squared error (MSE) minimization problem and a suboptimal algorithm is developed to iteratively update the active and passive beamforming strategies. Simulation results demonstrate that adopting the piece-wise near-field channel model leads to an improved SE compared to both the near-field and far-field models in the presence of CEEs. Furthermore, the proposed piece-wise near-field model achieves a good trade-off between modeling accuracy and system's degrees of freedom (DoF). △ Less

Submitted 21 June, 2024; originally announced June 2024.

Comments: 28pages

Deep Learning for CSI Feedback: One-Sided Model and Joint Multi-Module Learning Perspectives

Authors: Yiran Guo, Wei Chen, Feifei Sun, Jiaming Cheng, Michail Matthaiou, Bo Ai

Abstract: The use of deep learning (DL) for channel state information (CSI) feedback has garnered widespread attention across academia and industry. The mainstream DL architectures, e.g., CsiNet, deploy DL models on the base station (BS) side and the user equipment (UE) side, which are highly coupled and need to be trained jointly. However, two-sided DL models require collaborations between different networ… ▽ More The use of deep learning (DL) for channel state information (CSI) feedback has garnered widespread attention across academia and industry. The mainstream DL architectures, e.g., CsiNet, deploy DL models on the base station (BS) side and the user equipment (UE) side, which are highly coupled and need to be trained jointly. However, two-sided DL models require collaborations between different network vendors and UE vendors, which entails considerable challenges in order to achieve consensus, e.g., model maintenance and responsibility. Furthermore, DL-based CSI feedback design invokes DL to reduce only the CSI feedback error, whereas jointly optimizing several modules at the transceivers would provide more significant gains. This article presents DL-based CSI feedback from the perspectives of one-sided model and joint multi-module learning. We herein introduce various novel one-sided CSI feedback architectures. In particular, the recently proposed CSI-PPPNet provides a one-sided one-for-all framework, which allows a DL model to deal with arbitrary CSI compression ratios. We review different joint multi-module learning methods, where the CSI feedback module is learned jointly with other modules including channel coding, channel estimation, pilot design and precoding design. Finally, future directions and challenges for DL-based CSI feedback are discussed, from the perspectives of inherent limitations of artificial intelligence (AI) and practical deployment issues. △ Less

Submitted 8 May, 2024; originally announced May 2024.

Reconfigurable Massive MIMO: Precoding Design and Channel Estimation in the Electromagnetic Domain

Authors: Keke Ying, Zhen Gao, Yu Su, Tong Qin, Michail Matthaiou, Robert Schober

Abstract: Reconfigurable massive multiple-input multiple-output (RmMIMO) technology offers increased flexibility for future communication systems by exploiting previously untapped degrees of freedom in the electromagnetic (EM) domain. The representation of the traditional spatial domain channel state information (sCSI) limits the insights into the potential of EM domain channel properties, constraining the… ▽ More Reconfigurable massive multiple-input multiple-output (RmMIMO) technology offers increased flexibility for future communication systems by exploiting previously untapped degrees of freedom in the electromagnetic (EM) domain. The representation of the traditional spatial domain channel state information (sCSI) limits the insights into the potential of EM domain channel properties, constraining the base station's (BS) utmost capability for precoding design. This paper leverages the EM domain channel state information (eCSI) for radiation pattern design at the BS. We develop an orthogonal decomposition method based on spherical harmonic functions to decompose the radiation pattern into a linear combination of orthogonal bases. By formulating the radiation pattern design as an optimization problem for the projection coefficients over these bases, we develop a manifold optimization-based method for iterative radiation pattern and digital precoder design. To address the eCSI estimation problem, we capitalize on the inherent structure of the channel. Specifically, we propose a subspace-based scheme to reduce the pilot overhead for wideband sCSI estimation. Given the estimated full-band sCSI, we further employ parameterized methods for angle of arrival estimation. Subsequently, the complete eCSI can be reconstructed after estimating the equivalent channel gain via the least squares method. Simulation results demonstrate that, in comparison to traditional mMIMO systems with fixed antenna radiation patterns, the proposed RmMIMO architecture offers significant throughput gains for multi-user transmission at a low channel estimation overhead. △ Less

Submitted 5 May, 2024; originally announced May 2024.

Comments: This work is being submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Multiple-Target Detection in Cell-Free Massive MIMO-Assisted ISAC

Authors: Mohamed Elfiatoure, Mohammadali Mohammadi, Hien Quoc Ngo, Michail Matthaiou

Abstract: We propose a distributed implementation for integrated sensing and communication (ISAC) backed by a massive multiple input multiple output (CF-mMIMO) architecture without cells. Distributed multi-antenna access points (APs) simultaneously serve communication users (UEs) and emit probing signals towards multiple specified zones for sensing. The APs can switch between communication and sensing modes… ▽ More We propose a distributed implementation for integrated sensing and communication (ISAC) backed by a massive multiple input multiple output (CF-mMIMO) architecture without cells. Distributed multi-antenna access points (APs) simultaneously serve communication users (UEs) and emit probing signals towards multiple specified zones for sensing. The APs can switch between communication and sensing modes, and adjust their transmit power based on the network settings and sensing and communication operations' requirements. By considering local partial zero-forcing and maximum-ratio-transmit precoding at the APs for communication and sensing, respectively, we first derive closed-form expressions for the spectral efficiency (SE) of the UEs and the mainlobe-to-average-sidelobe ratio (MASR) of the sensing zones. Then, a joint operation mode selection and power control design problem is formulated to maximize the SE fairness among the UEs, while ensuring specific levels of MASR for sensing zones. The complicated mixed-integer problem is relaxed and solved via successive convex approximation approach. We further propose a low-complexity design, where AP mode selection is designed through a greedy algorithm and then power control is designed based on this chosen mode. Our findings reveal that the proposed scheme can consistently ensure a sensing success rate of $100\%$ for different network setups with a satisfactory fairness among all UEs. △ Less

Submitted 26 April, 2024; originally announced April 2024.

Comments: The manuscript has been submitted to IEEE TWC

Optimization of Super-Directive Linear Arrays with Differential Evolution for High Realized Gain

Authors: Ihsan Kanbaz, Okan Yurduseven, Michail Matthaiou

Abstract: Due to the low impedance and high feeding currents, it is naturally challenging to design super-directive antenna arrays that perfectly match the feed line, and this becomes almost impossible as the number of elements increases. In this paper, we assert that it is crucial to consider the trade-off between directivity and overall efficiency (to achieve high realized gain) before employing super-dir… ▽ More Due to the low impedance and high feeding currents, it is naturally challenging to design super-directive antenna arrays that perfectly match the feed line, and this becomes almost impossible as the number of elements increases. In this paper, we assert that it is crucial to consider the trade-off between directivity and overall efficiency (to achieve high realized gain) before employing super-directive arrays in real-world applications. Given this trade-off (high directivity and low mismatch for high realized gain), a 4-element dipole array (unit array) is optimized using the differential evolution (DE) algorithm. Then, the performance of the unit array in subarray configuration scenarios is analyzed. Finally, the obtained parameters are verified using the CST full-wave simulation software. The results clearly indicate that the proposed unit array is a strong candidate for dense array applications, particularly in the context of massive multiple-input multiple-output (MIMO), thanks to its notable high gain and efficiency. △ Less

Submitted 10 February, 2024; originally announced February 2024.

Wireless Information Surveillance via STAR-RIS

Authors: Fatemeh Jafarian, Mehrdad Ardebilipour, Mohammadali Mohammadi, Michail Matthaiou

Abstract: We explore the potential of a simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) to enhance the performance of wireless surveillance systems. The STAR-RIS is deployed between a full-duplex (FD) multi-antenna legitimate eavesdropper (E) and a suspicious communication pair. It reflects the suspicious signal towards the suspicious receiver (SR), while simultaneou… ▽ More We explore the potential of a simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) to enhance the performance of wireless surveillance systems. The STAR-RIS is deployed between a full-duplex (FD) multi-antenna legitimate eavesdropper (E) and a suspicious communication pair. It reflects the suspicious signal towards the suspicious receiver (SR), while simultaneously transmitting the same signal to E for interception purposes. Additionally, it enables the forwarding of a jamming signal from E to SR, which is located on the back side of the STAR-RIS. To enhance the eavesdrop** non-outage probability, we formulate a non-convex joint optimization problem to design the beamforming vectors at E and reflection/transmission phase shift matrices at the STAR-RIS. We adopt the block coordinate descent (BCD) algorithm and propose an approach, mainly based on semi-definite relaxation (SDR) and successive convex approximation (SCA), for solving the resulting decoupled sub-problems. Finally, we compare the performance of the proposed design against low-complexity zero-forcing (ZF)-based beamforming designs. △ Less

Submitted 1 February, 2024; originally announced February 2024.

Comments: This paper has been accepted for presentation at the IEEE WCNC 2024

On the BER vs. Bandwidth-Efficiency Trade-offs in Windowed OTSM Dispensing with Zero-Padding

Authors: Ze** Sui, Hongming Zhang, Hien Quoc Ngo, Michail Matthaiou, Lajos Hanzo

Abstract: An orthogonal time sequency multiplexing (OTSM) scheme using practical signaling functions is proposed under strong phase noise (PHN) scenarios. By utilizing the transform relationships between the delay-sequency (DS), time-frequency (TF) and time-domains, we first conceive the DS-domain input-output relationship of our OTSM system, where the conventional zero-padding is discarded to increase the… ▽ More An orthogonal time sequency multiplexing (OTSM) scheme using practical signaling functions is proposed under strong phase noise (PHN) scenarios. By utilizing the transform relationships between the delay-sequency (DS), time-frequency (TF) and time-domains, we first conceive the DS-domain input-output relationship of our OTSM system, where the conventional zero-padding is discarded to increase the spectral efficiency. Then, the unconditional pairwise error probability is derived, followed by deriving the bit error ratio (BER) upper bound in closed-form. Moreover, we compare the BER performance of our OTSM system based on several practical signaling functions. Our simulation results demonstrate that the upper bound derived accurately predicts the BER performance in the case of moderate to high signal-to-noise ratios (SNRs), while harnessing practical window functions is capable of attaining an attractive out-of-band emission (OOBE) vs. BER trade-off. △ Less

Submitted 1 February, 2024; originally announced February 2024.

Comments: Accepted by WCNC 2024

Cell-Free Massive MIMO SWIPT with Beyond Diagonal Reconfigurable Intelligent Surfaces

Authors: Thien Duc Hua, Mohammadali Mohammadi, Hien Quoc Ngo, Michail Matthaiou

Abstract: This paper investigates the integration of beyond-diagonal reconfigurable intelligent surfaces (BD-RISs) into cell-free massive multiple-input multiple-output (CF-mMIMO) systems, focusing on applications involving simultaneous wireless information and power transfer (SWIPT). The system supports concurrently two user groups: information users (IUs) and energy users (EUs). A BD-RIS is employed to en… ▽ More This paper investigates the integration of beyond-diagonal reconfigurable intelligent surfaces (BD-RISs) into cell-free massive multiple-input multiple-output (CF-mMIMO) systems, focusing on applications involving simultaneous wireless information and power transfer (SWIPT). The system supports concurrently two user groups: information users (IUs) and energy users (EUs). A BD-RIS is employed to enhance the wireless power transfer (WPT) directed towards the EUs. To comprehensively evaluate the system's performance, we present an analytical framework for the spectral efficiency (SE) of IUs and the average harvested energy (HE) of EUs in the presence of spatial correlation among the BD-RIS elements and for a non-linear energy harvesting circuit. Our findings offer important insights into the transformative potential of BD-RIS, setting the stage for the development of more efficient and effective SWIPT networks. Finally, incorporating a heuristic scattering matrix design at the BD-RIS results in a substantial improvement compared to the scenario with random scattering matrix design. △ Less

Submitted 1 February, 2024; originally announced February 2024.

Super-Directive Antenna Arrays: How Many Elements Do We Need?

Authors: Ihsan Kanbaz, Okan Yurduseven, Michail Matthaiou

Abstract: Super-directive antenna arrays have faced challenges in achieving high realized gains ever since their introduction in the academic literature. The primary challenges are high impedance mismatches and resistive losses, which become increasingly more dominant as the number of elements increases. Consequently, a critical limitation arises in determining the maximum number of elements that should be… ▽ More Super-directive antenna arrays have faced challenges in achieving high realized gains ever since their introduction in the academic literature. The primary challenges are high impedance mismatches and resistive losses, which become increasingly more dominant as the number of elements increases. Consequently, a critical limitation arises in determining the maximum number of elements that should be utilized to achieve super-directivity, particularly within dense array configurations. This paper addresses precisely this issue through an optimization study to design a super-directive antenna array with a maximum number of elements. An iterative approach is employed to increase the array of elements while sustaining a satisfactory realized gain using the differential evolution (DE) algorithm. Thus, it is observed that super-directivity can be obtained in an array with a maximum of five elements. Our results indicate that the obtained unit array has a $67.20\%$ higher realized gain than a uniform linear array with conventional excitation. For these reasons, these results make the proposed architecture a strong candidate for applications that require densely packed arrays, particularly in the context of massive multiple-input multiple-output (MIMO). △ Less

Submitted 17 January, 2024; originally announced January 2024.

A Hypernetwork Based Framework for Non-Stationary Channel Prediction

Authors: Guanzhang Liu, Zhengyang Hu, Lei Wang, Hongying Zhang, Jiang Xue, Michail Matthaiou

Abstract: In order to break through the development bottleneck of modern wireless communication networks, a critical issue is the out-of-date channel state information (CSI) in high mobility scenarios. In general, non-stationary CSI has statistical properties which vary with time, implying that the data distribution changes continuously over time. This temporal distribution shift behavior undermines the acc… ▽ More In order to break through the development bottleneck of modern wireless communication networks, a critical issue is the out-of-date channel state information (CSI) in high mobility scenarios. In general, non-stationary CSI has statistical properties which vary with time, implying that the data distribution changes continuously over time. This temporal distribution shift behavior undermines the accurate channel prediction and it is still an open problem in the related literature. In this paper, a hypernetwork based framework is proposed for non-stationary channel prediction. The framework aims to dynamically update the neural network (NN) parameters as the wireless channel changes to automatically adapt to various input CSI distributions. Based on this framework, we focus on low-complexity hypernetwork design and present a deep learning (DL) based channel prediction method, termed as LPCNet, which improves the CSI prediction accuracy with acceptable complexity. Moreover, to maximize the achievable downlink spectral efficiency (SE), a joint channel prediction and beamforming (BF) method is developed, termed as JLPCNet, which seeks to predict the BF vector. Our numerical results showcase the effectiveness and flexibility of the proposed framework, and demonstrate the superior performance of LPCNet and JLPCNet in various scenarios for fixed and varying user speeds. △ Less

Submitted 16 January, 2024; originally announced January 2024.

Joint Power Optimization and AP Selection for Secure Cell-Free Massive MIMO

Authors: Yasseen Sadoon Atiya, Zahra Mobini, Hien Quoc Ngo, Michail Matthaiou

Abstract: In this paper, we investigate joint power control and access point (AP) selection scheme in a cell-free massive multiple-input multiple-output (CF-mMIMO) system under an active eavesdrop** attack, where an eavesdropper tries to overhear the signal sent to one of the legitimate users by contaminating the uplink channel estimation. We formulate a joint optimization problem to minimize the eavesdro… ▽ More In this paper, we investigate joint power control and access point (AP) selection scheme in a cell-free massive multiple-input multiple-output (CF-mMIMO) system under an active eavesdrop** attack, where an eavesdropper tries to overhear the signal sent to one of the legitimate users by contaminating the uplink channel estimation. We formulate a joint optimization problem to minimize the eavesdrop** spectral efficiency (SE) while guaranteeing a given SE requirement at legitimate users. The challenging formulated problem is converted into a more tractable form and an efficient low-complexity accelerated projected gradient (APG)-based approach is proposed to solve it. Our findings reveal that the proposed joint optimization approach significantly outperforms the heuristic approaches in terms of secrecy SE (SSE). For instance, the $50\%$ likely SSE performance of the proposed approach is $265\%$ higher than that of equal power allocation and random AP selection scheme. △ Less

Submitted 12 January, 2024; originally announced January 2024.

Comments: This paper will appear at IEEE WCNC 2024

Joint User Association and Power Control for Cell-Free Massive MIMO

Authors: Chongzheng Hao, Tung Thanh Vu, Hien Quoc Ngo, Minh N. Dao, Xiaoyu Dang, Chenghua Wang, Michail Matthaiou

Abstract: This work proposes novel approaches that jointly design user equipment (UE) association and power control (PC) in a downlink user-centric cell-free massive multiple-input multiple-output (CFmMIMO) network, where each UE is only served by a set of access points (APs) for reducing the fronthaul signalling and computational complexity. In order to maximize the sum spectral efficiency (SE) of the UEs,… ▽ More This work proposes novel approaches that jointly design user equipment (UE) association and power control (PC) in a downlink user-centric cell-free massive multiple-input multiple-output (CFmMIMO) network, where each UE is only served by a set of access points (APs) for reducing the fronthaul signalling and computational complexity. In order to maximize the sum spectral efficiency (SE) of the UEs, we formulate a mixed-integer nonconvex optimization problem under constraints on the per-AP transmit power, quality-of-service rate requirements, maximum fronthaul signalling load, and maximum number of UEs served by each AP. In order to solve the formulated problem efficiently, we propose two different schemes according to the different sizes of the CFmMIMO systems. For small-scale CFmMIMO systems, we present a successive convex approximation (SCA) method to obtain a stationary solution and also develop a learning-based method (JointCFNet) to reduce the computational complexity. For large-scale CFmMIMO systems, we propose a low-complexity suboptimal algorithm using accelerated projected gradient (APG) techniques. Numerical results show that our JointCFNet can yield similar performance and significantly decrease the run time compared with the SCA algorithm in small-scale systems. The presented APG approach is confirmed to run much faster than the SCA algorithm in the large-scale system while obtaining an SE performance close to that of the SCA approach. Moreover, the median sum SE of the APG method is up to about 2.8 fold higher than that of the heuristic baseline scheme. △ Less

Submitted 20 May, 2024; v1 submitted 5 January, 2024; originally announced January 2024.

Comments: minor revision of the previous version

Protecting Massive MIMO-Radar Coexistence: Precoding Design and Power Control

Authors: Mohamed Elfiatoure, Mohammadali Mohammadi, Hien Quoc Ngo, Peter J. Smith, Michail Matthaiou

Abstract: This paper studies the coexistence between a downlink multiuser massive multi-input-multi-output (MIMO) communication system and MIMO radar. The performance of the massive MIMO system with maximum ratio ($\MR$), zero-forcing ($\ZF$), and protective $\ZF$ ($\PZF$) precoding designs is characterized in terms of spectral efficiency (SE) and by taking the channel estimation errors and power control in… ▽ More This paper studies the coexistence between a downlink multiuser massive multi-input-multi-output (MIMO) communication system and MIMO radar. The performance of the massive MIMO system with maximum ratio ($\MR$), zero-forcing ($\ZF$), and protective $\ZF$ ($\PZF$) precoding designs is characterized in terms of spectral efficiency (SE) and by taking the channel estimation errors and power control into account. The idea of $\PZF$ precoding relies on the projection of the information-bearing signal onto the null space of the radar channel to protect the radar against communication signals. We further derive closed-form expressions for the detection probability of the radar system for the considered precoding designs. By leveraging the closed-form expressions for the SE and detection probability, we formulate a power control problem at the radar and base station (BS) to maximize the detection probability while satisfying the per-user SE requirements. This optimization problem can be efficiently tackled via the bisection method by solving a linear feasibility problem. Our analysis and simulations show that the $\PZF$ design has the highest detection probability performance among all designs, with intermediate SE performance compared to the other two designs. Moreover, by optimally selecting the power control coefficients at the BS and radar, the detection probability improves significantly. △ Less

Submitted 19 December, 2023; originally announced December 2023.

Comments: 10 Figures, IEEE Open Journal of the Communication society

Measurement-Based Small-Scale Channel Model for Sub-6 GHz RIS-Assisted Communications

Authors: Jian Sang, Jifeng Lan, Mingyong Zhou, Boning Gao, Wankai Tang, Xiao Li, Michail Matthaiou, Shi **, Marco Di Renzo

Abstract: Reconfigurable intelligent surfaces (RISs) have attracted increasing interest from both academia and industry, thanks to their unique features on controlling electromagnetic (EM) waves. Although theoretical models for RIS-empowered communications have covered a variety of applications, yet, very few papers have investigated the modeling of real propagation characteristics. In this paper, we fill t… ▽ More Reconfigurable intelligent surfaces (RISs) have attracted increasing interest from both academia and industry, thanks to their unique features on controlling electromagnetic (EM) waves. Although theoretical models for RIS-empowered communications have covered a variety of applications, yet, very few papers have investigated the modeling of real propagation characteristics. In this paper, we fill this gap by providing an empirical statistical channel model to describe the small-scale channel variations for an RIS-assisted broadband system at 2.6 GHz. Based on real channel measurements in outdoor, indoor and outdoor-to-indoor (O2I) environments, we compare and analyze the global, inter-cluster and intra-cluster parameters. Measurement results indicate that the deployment of an RIS with proper phase configurations can significantly improve the channel quality by enhancing the $K$-factor and reducing the time dispersion. The small-scale fading is well characterized by the proposed statistical model and the empirical channel parameters. These results are essential for the design of emerging RIS-assisted wireless systems for future applications. △ Less

Submitted 4 March, 2024; v1 submitted 20 October, 2023; originally announced October 2023.

Cell-Free Massive MIMO Surveillance Systems

Authors: Zahra Mobini, Hien Quoc Ngo, Michail Matthaiou, Lajos Hanzo

Abstract: Wireless surveillance, in which untrusted communications links are proactively monitored by legitimate agencies, has started to garner a lot of interest for enhancing the national security. In this paper, we propose a new cell-free massive multiple-input multiple-output (CF-mMIMO) wireless surveillance system, where a large number of distributed multi-antenna aided legitimate monitoring nodes (MNs… ▽ More Wireless surveillance, in which untrusted communications links are proactively monitored by legitimate agencies, has started to garner a lot of interest for enhancing the national security. In this paper, we propose a new cell-free massive multiple-input multiple-output (CF-mMIMO) wireless surveillance system, where a large number of distributed multi-antenna aided legitimate monitoring nodes (MNs) embark on either observing or jamming untrusted communication links. To facilitate concurrent observing and jamming, a subset of the MNs is selected for monitoring the untrusted transmitters (UTs), while the remaining MNs are selected for jamming the untrusted receivers (URs). We analyze the performance of CF-mMIMO wireless surveillance and derive a closed-form expression for the monitoring success probability of MNs. We then propose a greedy algorithm for the observing vs, jamming mode assignment of MNs, followed by the conception of a jamming transmit power allocation algorithm for maximizing the minimum monitoring success probability concerning all the UT and UR pairs based on the associated long-term channel state information knowledge. In conclusion, our proposed CF-mMIMO system is capable of significantly improving the performance of the MNs compared to that of the state-of-the-art baseline. In scenarios of a mediocre number of MNs, our proposed scheme provides an 11-fold improvement in the minimum monitoring success probability compared to its co-located mMIMO benchmarker. △ Less

Submitted 15 October, 2023; originally announced October 2023.

Comments: This work has been accepted for publication in 2023 IEEE Global Communications Conference (GLOBECOM)

How to Combine OTFS and OFDM Modulations in Massive MIMO?

Authors: Ruoxi Chong, Mohammadali Mohammadi, Hien Quoc Ngo, Simon L. Cotton, Michail Matthaiou

Abstract: In this paper, we consider a downlink (DL) massive multiple-input multiple-output (MIMO) system, where different users have different mobility profiles. To support this system, we propose to use a hybrid orthogonal time frequency space (OTFS)/orthogonal frequency division multiplexing (OFDM) modulation scheme, where OTFS is applied for high-mobility users and OFDM is used for low-mobility users. T… ▽ More In this paper, we consider a downlink (DL) massive multiple-input multiple-output (MIMO) system, where different users have different mobility profiles. To support this system, we propose to use a hybrid orthogonal time frequency space (OTFS)/orthogonal frequency division multiplexing (OFDM) modulation scheme, where OTFS is applied for high-mobility users and OFDM is used for low-mobility users. Two precoding designs, namely full zero-forcing (FZF) precoding and partial zero-forcing (PZF) precoding, are considered and analyzed in terms of per-user spectral efficiency (SE). With FZF, interference among users is totally eliminated at the cost of high computational complexity, while PZF can be used to provide a trade-off between complexity and performance. To apply PZF precoding, users are grouped into two disjoint groups according to their mobility profile or channel gain. Then, zero-forcing (ZF) is utilized for high-mobility or strong channel gain users to completely cancel the inter-group interference, while maximum ratio transmission (MRT) is applied for low-mobility users or users with weak channel gain. To shed light on the system performance, the SE for high-mobility and low-mobility users with a minimum-mean-square-error (MMSE)-successive interference cancellation (SIC) detector is investigated. Our numerical results reveal that the PZF precoding with channel gain grou** can guarantee a similar quality of service for all users. In addition, with mobility-based grou**, the hybrid OTFS/OFDM modulation outperforms the conventional OFDM modulation for high-mobility users. △ Less

Submitted 13 October, 2023; originally announced October 2023.

Cell-Free Massive MIMO for ISAC: Access Point Operation Mode Selection and Power Control

Authors: Mohamed Elfiatoure, Mohammadali Mohammadi, Hien Quoc Ngo, Michail Matthaiou

Abstract: This paper considers a cell-free massive multipleinput multiple-output (MIMO) integrated sensing and communication (ISAC) system, where distributed MIMO access points (APs) are used to jointly serve the communication users and detect the presence of a single target. We investigate the problem of AP operation mode selection, wherein some APs are dedicated for downlink communication, while the remai… ▽ More This paper considers a cell-free massive multipleinput multiple-output (MIMO) integrated sensing and communication (ISAC) system, where distributed MIMO access points (APs) are used to jointly serve the communication users and detect the presence of a single target. We investigate the problem of AP operation mode selection, wherein some APs are dedicated for downlink communication, while the remaining APs are used for sensing purposes. Closed-form expressions for the individual spectral efficiency (SE) and mainlobe-to-average-sidelobe ratio (MASR) are derived, which are respectively utilized to assess the communication and sensing performances. Accordingly, a maxmin fairness problem is formulated and solved, where the minimum SE of the users is maximized, subject to the per-AP power constraints as well as sensing MASR constraint. Our numerical results show that the proposed AP operation mode selection with power control can significantly improve the communication performance for given sensing requirements. △ Less

Submitted 13 October, 2023; originally announced October 2023.

Comments: Accepted for presentation at the IEEE GLOBECOM 2023 conference

Cell-free Massive MIMO and SWIPT: Access Point Operation Mode Selection and Power Control

Authors: Mohammadali Mohammadi, Le-Nam Tran, Zahra Mobini, Hien Quoc Ngo, Michail Matthaiou

Abstract: This paper studies cell-free massive multiple-input multiple-output (CF-mMIMO) systems incorporating simultaneous wireless information and power transfer (SWIPT) for separate information users (IUs) and energy users (EUs) in Internet of Things (IoT) networks. To optimize both the spectral efficiency (SE) of IUs and harvested energy (HE) of EUs, we propose a joint access point (AP) operation mode s… ▽ More This paper studies cell-free massive multiple-input multiple-output (CF-mMIMO) systems incorporating simultaneous wireless information and power transfer (SWIPT) for separate information users (IUs) and energy users (EUs) in Internet of Things (IoT) networks. To optimize both the spectral efficiency (SE) of IUs and harvested energy (HE) of EUs, we propose a joint access point (AP) operation mode selection and power control design, wherein certain APs are designated for energy transmission to EUs, while others are dedicated to information transmission to IUs. We investigate the problem of maximizing the total HE for EUs, considering constraints on SE for individual IUs and minimum HE for individual EUs. Our numerical results showcase that the proposed AP operation mode selection algorithm can provide up to $76\%$ and $130\%$ performance gains over random AP operation mode selection with and without power control, respectively. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Comments: 6 pages, 2 figures, to be presented at GLOBECOM 2023, Kuala Lumpur

Time-Domain Channel Measurements and Small-Scale Fading Characterization for RIS-Assisted Wireless Communication Systems

Authors: Yanqing Ren, Mingyong Zhou, Xiaokun Teng, Shengguo Meng, Wankai Tang, Xiao Li, Shi **, Michail Matthaiou

Abstract: As a potentially revolutionary enabling technology for the sixth generation (6G) mobile communication system, reconfigurable intelligent surfaces (RISs) have attracted extensive attention from industry and academia. In RIS-assisted wireless communication systems, practical channel measurements and modeling serve as the foundation for system design, network optimization, and performance evaluation.… ▽ More As a potentially revolutionary enabling technology for the sixth generation (6G) mobile communication system, reconfigurable intelligent surfaces (RISs) have attracted extensive attention from industry and academia. In RIS-assisted wireless communication systems, practical channel measurements and modeling serve as the foundation for system design, network optimization, and performance evaluation. In this paper, a RIS time-domain channel measurement system, based on a software defined radio (SDR) platform, is developed for the first time to investigate the small-scale fading characteristics of RIS-assisted channels. We present RIS channel measurements in corridor and laboratory scenarios and compare the power delay profile (PDP) of the channel without RIS, with RIS specular reflection, and with RIS intelligent reflection. The multipath component parameters and cluster parameters based on the Saleh-Valenzuela model are extracted. We find that the PDPs of the RIS-assisted channel fit the power-law decay model and approximate the law of square decay. Through intelligent reflection, the RIS can decrease the delay and concentrate the energy of the virtual line-of-sight (VLOS) path, thereby reducing delay spread and mitigating multipath fading. Furthermore, the cluster characteristics of RIS-assisted channels are highly related to the measurement environment. In the laboratory scenario, a single cluster dominated by the VLOS path with smooth envelope is observed. On the other hand, in the corridor scenario, some additional clusters introduced by the RIS reflection are created. △ Less

Submitted 27 September, 2023; originally announced September 2023.

RIS-Assisted Wireless Link Signatures for Specific Emitter Identification

Authors: Ning Gao, Shuchen Meng, Cen Li, Shengguo Meng, Wankai Tang, Shi **, Michail Matthaiou

Abstract: The physical layer authentication (PLA) is a promising technology which can enhance the access security of a massive number of devices in the near future. In this paper, we propose a reconfigurable intelligent surface (RIS)-assisted PLA system, in which the legitimate transmitter can customize the channel fingerprints during PLA by controlling the ON-OFF state of the RIS. Without loss of generalit… ▽ More The physical layer authentication (PLA) is a promising technology which can enhance the access security of a massive number of devices in the near future. In this paper, we propose a reconfigurable intelligent surface (RIS)-assisted PLA system, in which the legitimate transmitter can customize the channel fingerprints during PLA by controlling the ON-OFF state of the RIS. Without loss of generality, we use the received signal strength (RSS) based spoofing detection approach to analyze the feasibility of the proposed architecture. Specifically, based on the RSS, we derive the statistical properties of PLA and give some interesting insights, which showcase that the RIS-assisted PLA is theoretically feasible. Then, we derive the optimal detection threshold to maximize the performance in the context of the presented performance metrics. Next, the actual feasibility of the proposed system is verified via proof-of-concept experiments on a RIS-assisted PLA prototype platform. The experiment results show that there are 3.5% and 76% performance improvements when the transmission sources are at different locations and at the same location, respectively. △ Less

Submitted 7 March, 2024; v1 submitted 14 September, 2023; originally announced September 2023.

EsaNet: Environment Semantics Enabled Physical Layer Authentication

Authors: Ning Gao, Qiying Huang, Cen Li, Shi **, Michail Matthaiou

Abstract: Wireless networks are vulnerable to physical layer spoofing attacks due to the wireless broadcast nature, thus, integrating communications and security (ICAS) is urgently needed for 6G endogenous security. In this letter, we propose an environment semantics enabled physical layer authentication network based on deep learning, namely EsaNet, to authenticate the spoofing from the underlying wireless… ▽ More Wireless networks are vulnerable to physical layer spoofing attacks due to the wireless broadcast nature, thus, integrating communications and security (ICAS) is urgently needed for 6G endogenous security. In this letter, we propose an environment semantics enabled physical layer authentication network based on deep learning, namely EsaNet, to authenticate the spoofing from the underlying wireless protocol. Specifically, the frequency independent wireless channel fingerprint (FiFP) is extracted from the channel state information (CSI) of a massive multi-input multi-output (MIMO) system based on environment semantics knowledge. Then, we transform the received signal into a two-dimensional red green blue (RGB) image and apply the you only look once (YOLO), a single-stage object detection network, to quickly capture the FiFP. Next, a lightweight classification network is designed to distinguish the legitimate from the illegitimate users. Finally, the experimental results show that the proposed EsaNet can effectively detect physical layer spoofing attacks and is robust in time-varying wireless environments. △ Less

Submitted 17 July, 2023; originally announced July 2023.

Channel Customization for Limited Feedback in RIS-assisted FDD Systems

Authors: Weicong Chen, Chao-Kai Wen, Xiao Li, Michail Matthaiou, Shi **

Abstract: Reconfigurable intelligent surfaces (RISs) represent a pioneering technology to realize smart electromagnetic environments by resha** the wireless channel. \textcolor[rgb]{0,0,0}{Jointly designing the transceiver and RIS relies on the channel state information (CSI), whose feedback has not been investigated in multi-RIS-assisted frequency division duplexing systems.} In this study, the limited f… ▽ More Reconfigurable intelligent surfaces (RISs) represent a pioneering technology to realize smart electromagnetic environments by resha** the wireless channel. \textcolor[rgb]{0,0,0}{Jointly designing the transceiver and RIS relies on the channel state information (CSI), whose feedback has not been investigated in multi-RIS-assisted frequency division duplexing systems.} In this study, the limited feedback of the RIS-assisted wireless channel is examined by capitalizing on the ability of the RIS in channel customization. \textcolor[rgb]{0,0,0}{By configuring the phase shifters of the surfaces using statistical CSI, we customize a sparse channel in rich-scattering environments, which significantly reduces the feedback overhead in designing the transceiver and RISs. Since the channel is customized in terms of singular value decomposition (SVD) with full-rank, the optimal SVD transceiver can be approached without a matrix decomposition and feeding back the complete channel parameters. The theoretical spectral efficiency (SE) loss of the proposed transceiver and RIS design is derived by considering the limited CSI quantization. To minimize the SE loss, a bit partitioning algorithm that splits the limited number of bits to quantize the CSI is developed.} Extensive numerical results show that the channel customization-based transceiver with reduced CSI can achieve satisfactory performance compared with the optimal transceiver with full CSI. Given the limited number of feedback bits, the bit partitioning algorithm can minimize the SE loss by adaptively allocating bits to quantize the channel parameters. △ Less

Submitted 3 May, 2023; originally announced May 2023.

Comments: Accepted by IEEE Transactions on Wireless Communications(https://ieeexplore.ieee.org/document/9976945)

Network-Assisted Full-Duplex Cell-Free Massive MIMO: Spectral and Energy Efficiencies

Authors: Mohammadali Mohammadi, Tung T. Vu, Hien Quoc Ngo, Michail Matthaiou

Abstract: We consider network-assisted full-duplex (NAFD) cell-free massive multiple-input multiple-output (CF-mMIMO) systems, where full-duplex (FD) transmission is virtually realized via half-duplex (HD) hardware devices. The HD access points (APs) operating in uplink (UL) mode and those operating in downlink (DL) mode simultaneously serve DL and UL user equipments (UEs) in the same frequency bands. We co… ▽ More We consider network-assisted full-duplex (NAFD) cell-free massive multiple-input multiple-output (CF-mMIMO) systems, where full-duplex (FD) transmission is virtually realized via half-duplex (HD) hardware devices. The HD access points (APs) operating in uplink (UL) mode and those operating in downlink (DL) mode simultaneously serve DL and UL user equipments (UEs) in the same frequency bands. We comprehensively analyze the performance of NAFD CF-mMIMO from both a spectral efficiency (SE) and energy efficiency (EE) perspectives. Specifically, we propose a joint optimization approach that designs the AP mode assignment, power control, and large-scale fading (LSFD) weights to improve the sum SE and EE of NAFD CF-mMIMO systems. We formulate two mixed-integer nonconvex optimization problems of maximizing the sum SE and EE, under realistic power consumption models, and the constraints on minimum individual SE requirements, maximum transmit power at each DL AP and UL UE. The challenging formulated problems are transformed into tractable forms and two novel algorithms are proposed to solve them using successive convex approximation techniques. More importantly, our approach can be applied to jointly optimize power control and LSFD weights for maximizing the sum SE and EE of HD and FD CF-mMIMO systems, which, to date, has not been studied. Numerical results show that: (a) our joint optimization approach significantly outperforms the heuristic approaches in terms of both sum SE and EE; (b) in CF-mMIMO systems, the NAFD scheme can provide approximately 30\% SE gains, while achieving a remarkable EE gain of up to 200\% compared with the HD and FD schemes. △ Less

Submitted 14 April, 2023; originally announced April 2023.

Comments: 18 pages, 8 figures, accepted for publication in the IEEE Journal on Selected Areas in Communications

Static Power Consumption Modeling and Measurement of Reconfigurable Intelligent Surfaces

Authors: **ghe Wang, Wankai Tang, Shi **, Xiao Li, Michail Matthaiou

Abstract: Reconfigurable intelligent surfaces (RISs) are anticipated to transform wireless communication in a way that is both economical and energy efficient. Revealing the practical power consumption characteristics of RISs can provide an essential toolkit for the optimal design of RIS-assisted wireless communication systems and energy efficiency performance evaluation. Based on our previous work that mod… ▽ More Reconfigurable intelligent surfaces (RISs) are anticipated to transform wireless communication in a way that is both economical and energy efficient. Revealing the practical power consumption characteristics of RISs can provide an essential toolkit for the optimal design of RIS-assisted wireless communication systems and energy efficiency performance evaluation. Based on our previous work that modeled the dynamic power consumption of RISs, we henceforth concentrate more on static power consumption. We first divide the RIS hardware into three basic parts: the FPGA control board, the drive circuits, and the RIS unit cells. The first two parts are mainly to be investigated and the last part has been modeled as the dynamic power consumption in the previous work. In this work, the power consumption of the FPGA control board is regarded as a constant value, however, that of the drive circuit is a variant that is affected by the number of control signals and its self-power consumption characteristics. Therefore, we model the power consumption of the drive circuits of various kinds of RISs, i.e., PIN diode-/Varactor diode-/RF switch-based RIS. Finally, the measurement results and typical value of static power consumption are illustrated and discussed. △ Less

Submitted 1 March, 2023; originally announced March 2023.

Comments: arXiv admin note: substantial text overlap with arXiv:2211.00323

Reconfigurable Massive MIMO: Harnessing the Power of the Electromagnetic Domain for Enhanced Information Transfer

Authors: Keke Ying, Zhen Gao, Sheng Chen, Xinyu Gao, Michail Matthaiou, Rui Zhang, Robert Schober

Abstract: The capacity of commercial massive multiple-input multiple-output (mMIMO) systems is constrained by the limited array aperture at the base station, and cannot meet the ever-increasing traffic demands of wireless networks. Given the array aperture, holographic MIMO with infinitesimal antenna spacing can maximize the capacity, but is physically unrealizable. As a promising alternative, reconfigurabl… ▽ More The capacity of commercial massive multiple-input multiple-output (mMIMO) systems is constrained by the limited array aperture at the base station, and cannot meet the ever-increasing traffic demands of wireless networks. Given the array aperture, holographic MIMO with infinitesimal antenna spacing can maximize the capacity, but is physically unrealizable. As a promising alternative, reconfigurable mMIMO is proposed to harness the unexploited power of the electromagnetic (EM) domain for enhanced information transfer. Specifically, the reconfigurable pixel antenna technology provides each antenna with an adjustable EM radiation (EMR) pattern, introducing extra degrees of freedom for information transfer in the EM domain. In this article, we present the concept and benefits of availing the EMR domain for mMIMO transmission. Moreover, we propose a viable architecture for reconfigurable mMIMO systems, and the associated system model and downlink precoding are also discussed. In particular, a three-level precoding scheme is proposed, and simulation results verify its considerable spectral and energy efficiency advantages compared to traditional mMIMO systems. Finally, we further discuss the challenges, insights, and prospects of deploying reconfigurable mMIMO, along with the associated hardware, algorithms, and fundamental theory. △ Less

Submitted 22 February, 2023; originally announced February 2023.

Comments: 7 pages, 3 figures. This paper is accepted by IEEE Wireless Communications Magazine. Copyright may be transferred without notice, after which this version may no longer be accessible

When Physical Layer Key Generation Meets RIS: Opportunities, Challenges, and Road Ahead

Authors: Ning Gao, Yu Han, Nannan Li, Shi **, Michail Matthaiou

Abstract: Physical layer key generation (PLKG) is a promising technology to obtain symmetric keys between a pair of wireless communication users in a plug-and-play manner. The shared entropy source almost entirely comes from the intrinsic randomness of the radio channel, which is highly dependent on the wireless environments. However, in some static/block fading wireless environments, the intrinsic randomne… ▽ More Physical layer key generation (PLKG) is a promising technology to obtain symmetric keys between a pair of wireless communication users in a plug-and-play manner. The shared entropy source almost entirely comes from the intrinsic randomness of the radio channel, which is highly dependent on the wireless environments. However, in some static/block fading wireless environments, the intrinsic randomness of the wireless channel is hard to be guaranteed. Very recently, thanks to reconfigurable intelligent surfaces (RISs) with their excellent ability on electromagnetic wave control, the wireless channel environment can be customized. In this article, we overview the RISaided PLKG in static indoor environments, including its channel model and hardware architectures. Then, we propose potential application scenarios and analyze the design challenges of RIS aided PLKG, including channel reciprocity, RIS reconfiguration speed and RIS deployment via proof-of-concept experiments on a RIS-aided PLKG prototype system. In particular, our experimental results show that the key generation rate is 15-fold higher than that without RIS in a static indoor environment. Next, we design a RIS jamming attack via a prototype experiment and discuss its possible attack-defense countermeasures. Finally, several conclusions and future directions are identified. △ Less

Submitted 3 July, 2023; v1 submitted 5 October, 2022; originally announced October 2022.

(Non)-Coherent MU-MIMO Block Fading Channels with Finite Blocklength and Linear Processing

Authors: Junjuan Feng, Hien Quoc Ngo, Michail Matthaiou

Abstract: This paper studies the coherent and non-coherent multiuser multiple-input multiple-output (MU-MIMO) uplink system in the finite blocklength regime. The i.i.d. Gaussian codebook is assumed for each user. To be more specific, the BS first uses two popular linear processing schemes to combine the signals transmitted from all users, namely, MRC and ZF. Following it, the matched maximum-likelihood (ML)… ▽ More This paper studies the coherent and non-coherent multiuser multiple-input multiple-output (MU-MIMO) uplink system in the finite blocklength regime. The i.i.d. Gaussian codebook is assumed for each user. To be more specific, the BS first uses two popular linear processing schemes to combine the signals transmitted from all users, namely, MRC and ZF. Following it, the matched maximum-likelihood (ML) and mismatched nearest-neighbour (NN) decoding metric for the coherent and non-coherent cases are respectively employed at the BS. Under these conditions, the refined third-order achievable coding rate, expressed as a function of the blocklength, average error probability, and the third-order term of the information density (called as the channel perturbation), is derived. With this result in hand, a detailed performance analysis is then pursued, through which, we derive the asymptotic results of the channel perturbation, achievable coding rate, channel capacity, and the channel dispersion. These theoretical results enable us to obtain a number of interesting insights related to the impact of the finite blocklength: i) in our system setting, massive MIMO helps to reduce the channel perturbation of the achievable coding rate, which can even be discarded without affecting the performance with just a small-to-moderate number of BS antennas and number of blocks; ii) under the non-coherent case, even with massive MIMO, the channel estimation errors cannot be eliminated unless the transmit powers in both the channel estimation and data transmission phases for each user are made inversely proportional to the square root of the number of BS antennas; iii) in the non-coherent case and for fixed total blocklength, the scenarios with longer coherence intervals and smaller number of blocks offer higher achievable coding rate. △ Less

Submitted 1 October, 2022; originally announced October 2022.

Comments: 20 pages, 9 figures

Superdirective Arrays with Finite-Length Dipoles: Modeling and New Perspectives

Authors: Konstantinos Dovelos, Stylianos D. Assimonis, Hien Quoc Ngo, Michail Matthaiou

Abstract: Dense arrays can facilitate the integration of multiple antennas into finite volumes. In addition to the compact size, sub-wavelength spacing enables superdirectivity for endfire operation, a phenomenon that has been mainly studied for isotropic and infinitesimal radiators. In this work, we focus on linear dipoles of arbitrary yet finite length. Specifically, we first introduce an array model that… ▽ More Dense arrays can facilitate the integration of multiple antennas into finite volumes. In addition to the compact size, sub-wavelength spacing enables superdirectivity for endfire operation, a phenomenon that has been mainly studied for isotropic and infinitesimal radiators. In this work, we focus on linear dipoles of arbitrary yet finite length. Specifically, we first introduce an array model that accounts for the sinusoidal current distribution (SCD) on very thin dipoles. Based on the SCD, the loss resistance of each dipole antenna is precisely determined. Capitalizing on the derived model, we next investigate the maximum achievable rate under a fixed power constraint. The optimal design entails conjugate power matching along with maximizing the array gain. Our theoretical analysis is corroborated by the method of moments under the thin-wire approximation, as well as by full-wave simulations. Numerical results showcase that a super-gain is attainable with high radiation efficiency when the dipole antennas are not too short and thin. △ Less

Submitted 2 August, 2022; originally announced August 2022.

Comments: To appear in 2022 IEEE GLOBECOM

Massive Access in Extra Large-Scale MIMO with Mixed-ADC over Near Field Channels

Authors: Yikun Mei, Zhen Gao, De Mi, Mingyu Zhou, Dezhi Zheng, Michail Matthaiou, Pei Xiao, Robert Schober

Abstract: Massive connectivity for extra large-scale multi-input multi-output (XL-MIMO) systems is a challenging issue due to the near-field access channels and the prohibitive cost. In this paper, we propose an uplink grant-free massive access scheme for XL-MIMO systems, in which a mixed-analog-to-digital converters (ADC) architecture is adopted to strike the right balance between access performance and po… ▽ More Massive connectivity for extra large-scale multi-input multi-output (XL-MIMO) systems is a challenging issue due to the near-field access channels and the prohibitive cost. In this paper, we propose an uplink grant-free massive access scheme for XL-MIMO systems, in which a mixed-analog-to-digital converters (ADC) architecture is adopted to strike the right balance between access performance and power consumption. By exploiting the spatial-domain structured sparsity and the piecewise angular-domain cluster sparsity of massive access channels, a compressive sensing (CS)-based two-stage orthogonal approximate message passing algorithm is proposed to efficiently solve the joint activity detection and channel estimation problem. Particularly, high-precision quantized measurements are leveraged to perform accurate hyper-parameter estimation, thereby facilitating the activity detection. Moreover, we adopt a subarray-wise estimation strategy to overcome the severe angular-domain energy dispersion problem which is caused by the near-field effect in XL-MIMO channels. Simulation results verify the superiority of our proposed algorithm over state-of-the-art CS algorithms for massive access based on XL-MIMO with mixed-ADC architectures. △ Less

Submitted 3 April, 2023; v1 submitted 5 July, 2022; originally announced July 2022.

Comments: Accepted by IEEE TVT

Superdirective Antenna Pairs for Energy-Efficient Terahertz Massive MIMO

Authors: Konstantinos Dovelos, Stylianos D. Assimonis, Hien Quoc Ngo, Michail Matthaiou

Abstract: Terahertz (THz) communication is widely deemed the next frontier of wireless networks owing to the abundant spectrum resources in the THz band. Whilst THz signals suffer from severe propagation losses, a massive antenna array can be deployed at the base station (BS) to mitigate those losses through beamforming. Nevertheless, a very large number of antennas increases the BS's hardware complexity an… ▽ More Terahertz (THz) communication is widely deemed the next frontier of wireless networks owing to the abundant spectrum resources in the THz band. Whilst THz signals suffer from severe propagation losses, a massive antenna array can be deployed at the base station (BS) to mitigate those losses through beamforming. Nevertheless, a very large number of antennas increases the BS's hardware complexity and power consumption, and hence it can lead to poor energy efficiency (EE). To surmount this fundamental problem, we propose a novel array design based on superdirectivity and nonuniform inter-element spacing. Specifically, we exploit the mutual coupling between closely spaced elements to form superdirective pairs. A unique property of them is that all require the same excitation amplitude, and thus can be driven by a single radio frequency chain akin to conventional phased arrays. Moreover, they facilitate multi-port impedance matching, which ensures maximum power transfer for any beamforming angle. After addressing the implementation issues of superdirectivity, we show that the number of BS antennas can be effectively reduced without sacrificing the achievable rate. Simulation results demonstrate that our design offers huge EE gains compared to uncoupled arrays with uniform spacing, and hence could be a radical solution for future THz systems. △ Less

Submitted 28 August, 2023; v1 submitted 1 July, 2022; originally announced July 2022.

Comments: Concept of superdirective antenna pairs to boost the energy efficiency of mmWave/THz MIMO arrays. Accepted for publication at IEEE TCOM

Virtually Full-duplex Cell-Free Massive MIMO with Access Point Mode Assignment

Authors: Mohammadali Mohammadi, Tung T. Vu, Behnaz Naderi Beni, Hien Quoc Ngo, Michail Matthaiou

Abstract: We consider a cell-free massive multiple-input multiple-output (MIMO) network utilizing a virtually full-duplex (vFD) mode, where access points (APs) with a downlink (DL) mode and those with an uplink (UL) mode simultaneously serve DL and UL users (UEs). In order to maximize the sum spectral efficiency (SE) of the DL and UL transmissions, we formulate a mixed-integer optimization problem to jointl… ▽ More We consider a cell-free massive multiple-input multiple-output (MIMO) network utilizing a virtually full-duplex (vFD) mode, where access points (APs) with a downlink (DL) mode and those with an uplink (UL) mode simultaneously serve DL and UL users (UEs). In order to maximize the sum spectral efficiency (SE) of the DL and UL transmissions, we formulate a mixed-integer optimization problem to jointly design the AP mode assignment and power control. This problem is subject to minimum per-UE SE requirements, per-AP power control, and per-UL UE power constraints. By employing the successive convex approximation technique, we propose an algorithm to obtain a stationary solution of the formulated problem. Numerical results show that the proposed vFD approach can provide a sum SE that is $2.5$ and $1.5$ times larger than the traditional half-duplex and heuristic baseline schemes, respectively, in terms of $95\%$-likely sum SE. △ Less

Submitted 12 May, 2022; originally announced May 2022.

Comments: accepted to appear in IEEE SPAWC'22, Oulu, Finland

Channel Estimation in RIS-assisted Downlink Massive MIMO: A Learning-Based Approach

Authors: Tung T. Vu, Trinh Van Chien, Canh T. Dinh, Hien Quoc Ngo, Michail Matthaiou

Abstract: For downlink massive multiple-input multiple-output (MIMO) operating in time-division duplex protocol, users can decode the signals effectively by only utilizing the channel statistics as long as channel hardening holds. However, in a reconfigurable intelligent surface (RIS)-assisted massive MIMO system, the propagation channels may be less hardened due to the extra random fluctuations of the effe… ▽ More For downlink massive multiple-input multiple-output (MIMO) operating in time-division duplex protocol, users can decode the signals effectively by only utilizing the channel statistics as long as channel hardening holds. However, in a reconfigurable intelligent surface (RIS)-assisted massive MIMO system, the propagation channels may be less hardened due to the extra random fluctuations of the effective channel gains. To address this issue, we propose a learning-based method that trains a neural network to learn a map** between the received downlink signal and the effective channel gains. The proposed method does not require any downlink pilots and statistical information of interfering users. Numerical results show that, in terms of mean-square error of the channel estimation, our proposed learning-based method outperforms the state-of-the-art methods, especially when the light-of-sight (LoS) paths are dominated by non-LoS paths with a low level of channel hardening, e.g., in the cases of small numbers of RIS elements and/or base station antennas. △ Less

Submitted 15 May, 2022; v1 submitted 11 May, 2022; originally announced May 2022.

Comments: accepted to appear in IEEE SPAWC'22, Oulu, Finland

Data Size-Aware Downlink Massive MIMO: A Session-Based Approach

Authors: Tung T. Vu, Hien Quoc Ngo, Minh N. Dao, Michail Matthaiou, Erik G. Larsson

Abstract: This letter considers the development of transmission strategies for the downlink of massive multiple-input multiple-output networks, with the objective of minimizing the completion time of the transmission. Specifically, we introduce a session-based scheme that splits time into sessions and allocates different rates in different sessions for the different users. In each session, one user is selec… ▽ More This letter considers the development of transmission strategies for the downlink of massive multiple-input multiple-output networks, with the objective of minimizing the completion time of the transmission. Specifically, we introduce a session-based scheme that splits time into sessions and allocates different rates in different sessions for the different users. In each session, one user is selected to complete its transmission and will not join subsequent sessions, which results in successively lower levels of interference when moving from one session to the next. An algorithm is developed to assign users and allocate transmit power that minimizes the completion time. Numerical results show that our proposed session-based scheme significantly outperforms conventional non-session-based schemes. △ Less

Submitted 10 May, 2022; v1 submitted 9 May, 2022; originally announced May 2022.

Comments: accepted to appear in IEEE Wireless Communications Letter, 2022

When Cell-Free Massive MIMO Meets OTFS Modulation: The Downlink Case

Authors: Mohammadali Mohammadi, Hien Quoc Ngo, Michail Matthaiou

Abstract: We provide a performance evaluation of orthogonal time frequency space (OTFS) modulation in cell-free massive MIMO (multiple-input multiple-output) systems. By leveraging the inherent sparsity of the delay-Doppler (DD) representation of time-varying channels, we apply the embedded pilot-aided channel estimation method with reduced guard intervals and derive the minimum mean-square error estimate o… ▽ More We provide a performance evaluation of orthogonal time frequency space (OTFS) modulation in cell-free massive MIMO (multiple-input multiple-output) systems. By leveraging the inherent sparsity of the delay-Doppler (DD) representation of time-varying channels, we apply the embedded pilot-aided channel estimation method with reduced guard intervals and derive the minimum mean-square error estimate of the channel gains from received uplink pilots at the access points (APs). Each AP applies conjugate beamforming to transmit data to the users. We derive a closed-form expression for the individual user downlink throughput as a function of the numbers of APs, users and DD channel estimate parameters. We compare the OTFS performance with that of orthogonal frequency division multiplexing (OFDM) at high-mobility conditions. Our findings reveal that with uncorrelated shadowing, cell-free massive MIMO with OTFS modulation achieves up to 35% gain in 95%-likely per-user throughput, compared with the OFDM counterpart. Finally, the increase in the per user throughput is more pronounced at the median rates over the correlated shadowing scenarios. △ Less

Submitted 14 March, 2022; originally announced March 2022.

Comments: 6 pages, 2 figures, accepted by IEEE ICC 2022. arXiv admin note: substantial text overlap with arXiv:2112.10869

Cell-Free Massive MIMO with OTFS Modulation: Power Control and Resource Allocation

Authors: Mohammadali Mohammadi, Hien Quoc Ngo, Michail Matthaiou

Abstract: We consider the downlink of cell-free massive multiple-input multiple-output (MIMO) systems with orthogonal time frequency space (OTFS) modulation. Two pilot-based channel estimation schemes, namely superimposed pilot-based (SP-CHE) and embedded pilot-based channel estimation (EP-CHE), are applied to estimate the channels at the access points (APs). The SP-CHE scheme superimposes low power pilots… ▽ More We consider the downlink of cell-free massive multiple-input multiple-output (MIMO) systems with orthogonal time frequency space (OTFS) modulation. Two pilot-based channel estimation schemes, namely superimposed pilot-based (SP-CHE) and embedded pilot-based channel estimation (EP-CHE), are applied to estimate the channels at the access points (APs). The SP-CHE scheme superimposes low power pilots onto the data symbols in the delay-Doppler domain to avoid the spectral efficiency (SE) loss due to null guard intervals used in the EP-CHE scheme. In the case of SP-CHE scheme, we consider a max-min fairness optimization problem to jointly optimize the peruser pilot/data power allocation coefficients and per-AP power control coefficients. The complicated non-convex problem is then iteratively solved through two decoupled sub-problems. Moreover, a max-min fairness problem is cast for the EP-CHE scheme, where the optimization variables are the per-AP power control coefficients. Numerical results show that the proposed resource allocation approaches provide at most 42 and 5-fold increase in the 95%-likely per-user SE for the SP-CHE and EP-CHE scheme, respectively, compared with the uniform power control and in correlated shadowing fading channels. △ Less

Submitted 14 March, 2022; originally announced March 2022.

Comments: Accepted in ICC 2022 Workshop on OTFS and Delay-Doppler Signal Processing for 6G and Future High-mobility Communications. arXiv admin note: text overlap with arXiv:2112.10869

Cell-Free Massive MIMO Meets OTFS Modulation

Authors: Mohammadali Mohammadi, Hien Quoc Ngo, Michail Matthaiou

Abstract: We provide the first-ever performance evaluation of orthogonal time frequency space (OTFS) modulation in cell-free massive multiple-input multiple-output (MIMO) systems. To investigate trade-off between performance and overhead, we apply embedded pilot-aided and superimposed pilot-based channel estimation methods. We then derive a closed-form expression for the individual user downlink and uplink… ▽ More We provide the first-ever performance evaluation of orthogonal time frequency space (OTFS) modulation in cell-free massive multiple-input multiple-output (MIMO) systems. To investigate trade-off between performance and overhead, we apply embedded pilot-aided and superimposed pilot-based channel estimation methods. We then derive a closed-form expression for the individual user downlink and uplink spectral efficiencies as a function of the numbers of APs, users and delay-Doppler domain channel estimate parameters. Based on these analytical results, we also present new scaling laws that the AP's and user's transmit power should satisfy, to sustain a desirable quality of service. It is found that when the number of APs, $M_a$, grows without bound, we can reduce the transmit power of each user and AP proportionally to $1/M_a$ and $1/M_a^2$, respectively, during the uplink and downlink phases. We compare the OTFS performance with that of orthogonal frequency division multiplexing (OFDM) at high-mobility conditions. Our findings reveal that with shadowing correlation, OTFS modulation with embedded pilot-based channel estimation provides $30$-folds gain over the OFDM counterpart in terms of $95\%$-likely per-user downlink rate. Finally, with superimposed pilot-based channel estimation, the increase in the per-user throughput is more pronounced at the median rates over the correlated shadowing channels. △ Less

Submitted 27 September, 2022; v1 submitted 20 December, 2021; originally announced December 2021.

Comments: 4 figures, Accepted in IEEE Transactions on Communications

Smart Radio Environments

Authors: Gabriele Gradoni, Marco Di Renzo, Ana Diaz-Rubio, Sergei Tretyakov, Christophe Caloz, Zhen Peng, Andrea Alu, Geoffroy Lerosey, Mathias Fink, Vincenzo Galdi, Tie Jun Cui, Benjamin Frazier, Steven Anlage, Marco Salucci, Andrea Massa, Qiang Cheng, **ghe Wang, Shi **, Davide Dardari, Nicolo Decarli, Okan Yurduseven, Michail Matthaiou, Mitchell Kenney, George Gordon, Orestis Georgiou , et al. (5 additional authors not shown)

Abstract: This Roadmap takes the reader on a journey through the research in electromagnetic wave propagation control via reconfigurable intelligent surfaces. Meta-surface modelling and design methods are reviewed along with physical realisation techniques. Several wireless applications are discussed, including beam-forming, focusing, imaging, localisation, and sensing, some rooted in novel architectures fo… ▽ More This Roadmap takes the reader on a journey through the research in electromagnetic wave propagation control via reconfigurable intelligent surfaces. Meta-surface modelling and design methods are reviewed along with physical realisation techniques. Several wireless applications are discussed, including beam-forming, focusing, imaging, localisation, and sensing, some rooted in novel architectures for future mobile communications networks towards 6G. △ Less

Submitted 16 November, 2021; originally announced November 2021.

Comments: 55 pages, 22 figures, submitted to Reviews of Electromagnetics

Intelligent Reflecting Surface-Aided Wideband THz Communications: Modeling and Analysis

Authors: Konstantinos Dovelos, Stylianos D. Assimonis, Hien Quoc Ngo, Boris Bellalta, Michail Matthaiou

Abstract: In this paper, we study the performance of wideband terahertz (THz) communications assisted by an intelligent reflecting surface (IRS). Specifically, we first introduce a generalized channel model that is suitable for electrically large THz IRSs operating in the near-field. Unlike prior works, our channel model takes into account the spherical wavefront of the emitted electromagnetic waves and the… ▽ More In this paper, we study the performance of wideband terahertz (THz) communications assisted by an intelligent reflecting surface (IRS). Specifically, we first introduce a generalized channel model that is suitable for electrically large THz IRSs operating in the near-field. Unlike prior works, our channel model takes into account the spherical wavefront of the emitted electromagnetic waves and the spatial-wideband effect. We next show that conventional frequency-flat beamfocusing significantly reduces the power gain due to beam squint, and hence is highly suboptimal. More importantly, we analytically characterize this reduction when the spacing between adjacent reflecting elements is negligible, i.e., holographic reflecting surfaces. Numerical results corroborate our analysis and provide important insights into the design of future IRS-aided THz systems. △ Less

Submitted 29 October, 2021; originally announced October 2021.

Comments: To appear in the ITG Workshop on Smart Antennas (WSA), 2021

Electromagnetic Modeling of Holographic Intelligent Reflecting Surfaces at Terahertz Bands

Authors: Konstantinos Dovelos, Stylianos D. Assimonis, Hien Quoc Ngo, Boris Bellalta, Michail Matthaiou

Abstract: Intelligent reflecting surface (IRS)-assisted wireless communication is widely deemed a key technology for 6G systems. The main challenge in deploying an IRS-aided terahertz (THz) link, though, is the severe propagation losses at high frequency bands. Hence, a THz IRS is expected to consist of a massive number of reflecting elements to compensate for those losses. However, as the IRS size grows, t… ▽ More Intelligent reflecting surface (IRS)-assisted wireless communication is widely deemed a key technology for 6G systems. The main challenge in deploying an IRS-aided terahertz (THz) link, though, is the severe propagation losses at high frequency bands. Hence, a THz IRS is expected to consist of a massive number of reflecting elements to compensate for those losses. However, as the IRS size grows, the conventional far-field assumption starts becoming invalid and the spherical wavefront of the radiated waves must be taken into account. In this work, we focus on the near-field and analytically determine the IRS response in the Fresnel zone by leveraging electromagnetic theory. Specifically, we derive a novel expression for the path loss and beampattern of a holographic IRS, which is then used to model its discrete counterpart. Our analysis sheds light on the modeling aspects and beamfocusing capabilities of THz IRSs. △ Less

Submitted 18 August, 2021; originally announced August 2021.

Comments: To appear in the 55th Annual Asilomar Conference on Signals, Systems, and Computers, 2021 (invited paper)

How Does Cell-Free Massive MIMO Support Multiple Federated Learning Groups?

Authors: Tung T. Vu, Hien Quoc Ngo, Thomas L. Marzetta, Michail Matthaiou

Abstract: Federated learning (FL) has been considered as a promising learning framework for future machine learning systems due to its privacy preservation and communication efficiency. In beyond-5G/6G systems, it is likely to have multiple FL groups with different learning purposes. This scenario leads to a question: How does a wireless network support multiple FL groups? As an answer, we first propose to… ▽ More Federated learning (FL) has been considered as a promising learning framework for future machine learning systems due to its privacy preservation and communication efficiency. In beyond-5G/6G systems, it is likely to have multiple FL groups with different learning purposes. This scenario leads to a question: How does a wireless network support multiple FL groups? As an answer, we first propose to use a cell-free massive multiple-input multiple-output (MIMO) network to guarantee the stable operation of multiple FL processes by letting the iterations of these FL processes be executed together within a large-scale coherence time. We then develop a novel scheme that asynchronously executes the iterations of FL processes under multicasting downlink and conventional uplink transmission protocols. Finally, we propose a simple/low-complexity resource allocation algorithm which optimally chooses the power and computation resources to minimize the execution time of each iteration of each FL process. △ Less

Submitted 20 July, 2021; originally announced July 2021.

Comments: Accepted to appear in Proc. IEEE International Workshop on Signal Processing Advances in Wireless Communications (SPAWC) in Lucca, Italy, Sep. 2021

3-D Deployment of UAV Swarm for Massive MIMO Communications

Authors: Ning Gao, Xiao Li, Shi **, Michail Matthaiou

Abstract: We consider the uplink transmission between a multi-antenna ground station and an unmanned aerial vehicle (UAV) swarm. The UAVs are assumed as intelligent agents, which can explore their optimal three dimensional (3-D) deployment to maximize the channel capacity of the multiple input multiple output (MIMO) system. Specifically, considering the limitations of each UAV in accessing the global inform… ▽ More We consider the uplink transmission between a multi-antenna ground station and an unmanned aerial vehicle (UAV) swarm. The UAVs are assumed as intelligent agents, which can explore their optimal three dimensional (3-D) deployment to maximize the channel capacity of the multiple input multiple output (MIMO) system. Specifically, considering the limitations of each UAV in accessing the global information of the network, we focus on a decentralized control strategy by noting that each UAV in the swarm can only utilize the local information to achieve the optimal 3-D deployment. In this case, the optimization problem can be divided into several optimization sub-problems with respect to the rank function. Due to the non-convex nature of the rank function and the fact that the optimization sub-problems are coupled, the original problem is NP-hard and, thus, cannot be solved with standard convex optimization solvers. Interestingly, we can relax the constraint condition of each sub-problem and solve the optimization problem by a formulated UAVs channel capacity maximization game. We analyze such game according to the designed reward function and the potential function. Then, we discuss the existence of the pure Nash equilibrium in the game. To achieve the best Nash equilibrium of the MIMO system, we develop a decentralized learning algorithm, namely decentralized UAVs channel capacity learning. The details of the algorithm are provided, and then, the convergence, the effectiveness and the computational complexity are analyzed, respectively. Moreover, we give some insightful remarks based on the proofs and the theoretical analysis. Also, extensive simulations illustrate that the developed learning algorithm can achieve a high MIMO channel capacity by optimizing the 3-D UAV swarm deployment with the local information. △ Less

Submitted 3 May, 2021; originally announced May 2021.

Optimal Per-Antenna ADC Bit Allocation in Correlated and Cell-Free Massive MIMO

Authors: Daniel Verenzuela, Emil Björnson, Michail Matthaiou

Abstract: In Massive MIMO base stations (BSs), the hardware design needs to balance high spectral efficiency (SE) with low complexity. The level of hardware impairments (HWIs) indicates how strong the signal distortion introduced by hardware imperfections is. In particular, the analog-to-digital converters (ADCs) have an important impact on signal distortion and power consumption. This article addresses the… ▽ More In Massive MIMO base stations (BSs), the hardware design needs to balance high spectral efficiency (SE) with low complexity. The level of hardware impairments (HWIs) indicates how strong the signal distortion introduced by hardware imperfections is. In particular, the analog-to-digital converters (ADCs) have an important impact on signal distortion and power consumption. This article addresses the fundamental problem of selecting the optimal hardware quality in the Massive MIMO space. In particular, we examine the optimal HWI and ADC bit allocation per BS antenna to maximize the SE. The results show that in co-located arrays with low channel gain variations across antennas, equal ADC bit allocation is optimal. In contrast, cell-free Massive MIMO systems benefit the most from optimizing the ADC bit allocation achieving improvements in the order of 2 [bit-per-channel-use] per user equipment when using regularized zero-forcing (RZF). In addition, when including the impact of power consumption in cell-free Massive MIMO with RZF, allocating low values of mixed ADC bit resolutions across the BS antennas can increase the energy efficiency up to 30% compared to equal ADC bit allocation. △ Less

Submitted 19 April, 2021; originally announced April 2021.

Comments: To appear in IEEE Transactions on Communications, 14 pages, 4 figures

Intelligent Reflecting Surfaces at Terahertz Bands: Channel Modeling and Analysis

Authors: Konstantinos Dovelos, Stylianos D. Assimonis, Hien Quoc Ngo, Boris Bellalta, Michail Matthaiou

Abstract: An intelligent reflecting surface (IRS) at terahertz (THz) bands is expected to have a massive number of reflecting elements to compensate for the severe propagation losses. However, as the IRS size grows, the conventional far-field assumption starts becoming invalid and the spherical wavefront of the radiated waves should be taken into account. In this work, we consider a spherical wave channel m… ▽ More An intelligent reflecting surface (IRS) at terahertz (THz) bands is expected to have a massive number of reflecting elements to compensate for the severe propagation losses. However, as the IRS size grows, the conventional far-field assumption starts becoming invalid and the spherical wavefront of the radiated waves should be taken into account. In this work, we consider a spherical wave channel model and pursue a comprehensive study of IRS-aided multiple-input multiple-output (MIMO) in terms of power gain and energy efficiency (EE). Specifically, we first analyze the power gain under beamfocusing and beamforming, and show that the latter is suboptimal even for multiple meters away from the IRS. To this end, we derive an approximate, yet accurate, closed-form expression for the loss in the power gain under beamforming. Building on the derived model, we next show that an IRS can significantly improve the EE of MIMO when it operates in the radiating near-field and performs beamfocusing. Numerical results corroborate our analysis and provide novel insights into the design and performance of IRS-assisted THz communication. △ Less

Submitted 28 March, 2021; originally announced March 2021.

Comments: To appear in 2021 IEEE International Conference on Communications Workshop

Model-based Learning Network for 3-D Localization in mmWave Communications

Authors: Jie Yang, Shi **, Chao-Kai Wen, Jiajia Guo, Michail Matthaiou, Bo Gao

Abstract: This study considers the joint location and velocity estimation of UE and scatterers in a three-dimensional mmWave CRAN architecture. Several existing works have achieved satisfactory results with neural networks (NNs) for localization. However, the black box NN localization method has limited performance and relies on a prohibitive amount of training data. Thus, we propose a model-based learning… ▽ More This study considers the joint location and velocity estimation of UE and scatterers in a three-dimensional mmWave CRAN architecture. Several existing works have achieved satisfactory results with neural networks (NNs) for localization. However, the black box NN localization method has limited performance and relies on a prohibitive amount of training data. Thus, we propose a model-based learning network for localization by combining NNs with geometric models. Specifically, we first develop an unbiased WLS estimator by utilizing hybrid delay/angular measurements, which determine the location and velocity of the UE in only one estimator, and can obtain the location and velocity of scatterers further. The proposed estimator can achieve the CRLB and outperforms state-of-the-art methods. Second, we establish a NN-assisted localization method (NN-WLS) by replacing the linear approximations in the proposed WLS localization model with NNs to learn higher-order error components, thereby enhancing the performance of the estimator. The solution possesses the powerful learning ability of the NN and the robustness of the proposed geometric model. Moreover, the ensemble learning is applied to improve the localization accuracy further. Comprehensive simulations show that the proposed NN-WLS is superior to the benchmark methods in terms of localization accuracy, robustness, and required time resources. △ Less

Submitted 20 March, 2021; originally announced March 2021.

Comments: Paper accepted for publication in IEEE Transactions on Wireless Communications. arXiv admin note: text overlap with arXiv:1908.04142

Channel Estimation and Hybrid Combining for Wideband Terahertz Massive MIMO Systems

Authors: Konstantinos Dovelos, Michail Matthaiou, Hien Quoc Ngo, Boris Bellalta

Abstract: Terahertz (THz) communication is widely considered as a key enabler for future 6G wireless systems. However, THz links are subject to high propagation losses and inter-symbol interference due to the frequency selectivity of the channel. Massive multiple-input multiple-output (MIMO) along with orthogonal frequency division multiplexing (OFDM) can be used to deal with these problems. Nevertheless, w… ▽ More Terahertz (THz) communication is widely considered as a key enabler for future 6G wireless systems. However, THz links are subject to high propagation losses and inter-symbol interference due to the frequency selectivity of the channel. Massive multiple-input multiple-output (MIMO) along with orthogonal frequency division multiplexing (OFDM) can be used to deal with these problems. Nevertheless, when the propagation delay across the base station (BS) antenna array exceeds the symbol period, the spatial response of the BS array varies across the OFDM subcarriers. This phenomenon, known as beam squint, renders narrowband combining approaches ineffective. Additionally, channel estimation becomes challenging in the absence of combining gain during the training stage. In this work, we address the channel estimation and hybrid combining problems in wideband THz massive MIMO with uniform planar arrays. Specifically, we first introduce a low-complexity beam squint mitigation scheme based on true-time-delay. Next, we propose a novel variant of the popular orthogonal matching pursuit (OMP) algorithm to accurately estimate the channel with low training overhead. Our channel estimation and hybrid combining schemes are analyzed both theoretically and numerically. Moreover, the proposed schemes are extended to the multi-antenna user case. Simulation results are provided showcasing the performance gains offered by our design compared to standard narrowband combining and OMP-based channel estimation. △ Less

Submitted 12 February, 2021; originally announced February 2021.

Comments: Submitted to IEEE JSAC; minor revision

Towards Large Intelligent Surface (LIS)-based Communications

Authors: Jide Yuan, Hien Quoc Ngo, Michail Matthaiou

Abstract: The concept of large intelligent surface (LIS)-based communication has recently raised research attention, in which a LIS is regarded as an antenna array whose entire surface area can be used for radio signal transmission and reception. To provide a fundamental understanding of LIS-based communication, this paper studies the uplink (UL) performance of LIS-based communication with matched filtering… ▽ More The concept of large intelligent surface (LIS)-based communication has recently raised research attention, in which a LIS is regarded as an antenna array whose entire surface area can be used for radio signal transmission and reception. To provide a fundamental understanding of LIS-based communication, this paper studies the uplink (UL) performance of LIS-based communication with matched filtering. We first investigate the new properties introduced by LIS. In particular, the array gain, spatial resolution, and the capability of interference suppression are theoretically presented and characterized. Then, we study two possible LIS system layouts in terms of UL, i.e., centralized LIS (C-LIS) and distributed LIS (D-LIS). Our analysis showcases that a centralized system has strong capability of interference suppression; in fact, interference can nearly be eliminated if the surface area is sufficient large or the frequency band is sufficient high. For D-LIS, we propose a series of resource allocation algorithms, including user association scheme, orientation control, and power control, to extend the coverage area of a distributed system. Simulation results show that the proposed algorithms significantly improve the system performance, and even more importantly, we observe that D-LIS outperforms CLIS in microwave bands, while C-LIS is superior to D-LIS in mmWave bands. These observations serve as useful guidelines for practical LIS deployments. △ Less

Submitted 9 July, 2020; originally announced July 2020.

Comments: 15 pages, 9 figures. arXiv admin note: substantial text overlap with arXiv:2002.12183

Intelligent Reflecting Surfaces with Spatial Modulation: An Electromagnetic Perspective

Authors: Okan Yurduseven, Stylianos D. Assimonis, Michail Matthaiou

Abstract: Electromagnetic wave control using the concept of a reflecting surface is first studied as a near-field and a far-field problem. Using a secondary source present in a wireless communication environment, such as a backscatter tag, it is possible to leverage the incoming radiation from the source as a reference-wave to synthesize the desired wavefront across the reflecting surface, radiating a field… ▽ More Electromagnetic wave control using the concept of a reflecting surface is first studied as a near-field and a far-field problem. Using a secondary source present in a wireless communication environment, such as a backscatter tag, it is possible to leverage the incoming radiation from the source as a reference-wave to synthesize the desired wavefront across the reflecting surface, radiating a field of interest. In this geometry, the phase grating, which is synthesized using an array of sub-wavelength unit cells, is calculated by interacting the incident reference-wave and the desired wavefront, similar to a hologram. When illuminated by the reference-wave, the reflected wavefront from the calculated phase grating is guaranteed to constructively add in the direction of the desired radiation (beam-steering in the far-field) and also focus at the intended depth (beam-focusing in the radiative near-field). Leveraging a dynamic modulation mechanism in the context of an intelligent reflective surface (IRS) illuminated by a backscatter tag, later, we present that one can selectively focus and defocus at an arbitrarily positioned receiver within the 3D field of view of the reflecting surface. This enables the control of the amplitude of the radiated electric field at the receiver location, paving the way for a spatial modulation mechanism by means of reconfiguring the reflecting surface in a backscattered wireless communication environment. In addition to the phase modification approach on a unit cell level to reconfigure the aperture radiated wavefronts, we finally present a time varying IRS concept making use of a time-delay based approach relying on a delay adjustment between the reflection coefficients of the IRS' unit cell lattices. △ Less

Submitted 22 June, 2020; originally announced June 2020.

Comments: 13 pages, 9 Figures, Preprint

The Road to 6G: Ten Physical Layer Challenges for Communications Engineers

Authors: Michail Matthaiou, Okan Yurduseven, Hien Quoc Ngo, David Morales-Jimenez, Simon L. Cotton, Vincent F. Fusco

Abstract: While the deployment of 5G cellular systems will continue well in to the next decade, much interest is already being generated towards technologies that will underlie its successor, 6G. Undeniably, 5G will have transformative impact on the way we live and communicate, yet, it is still far away from supporting the Internet-of-Everything (IoE), where upwards of a million devices per $\textrm{km}^3$… ▽ More While the deployment of 5G cellular systems will continue well in to the next decade, much interest is already being generated towards technologies that will underlie its successor, 6G. Undeniably, 5G will have transformative impact on the way we live and communicate, yet, it is still far away from supporting the Internet-of-Everything (IoE), where upwards of a million devices per $\textrm{km}^3$ (both terrestrial and aerial) will require ubiquitous, reliable, low-latency connectivity. This article looks at some of the fundamental problems that pertain to key physical layer enablers for 6G. This includes highlighting challenges related to intelligent reflecting surfaces, cell-free massive MIMO and THz communications. Our analysis covers theoretical modeling challenges, hardware implementation issues and scalability among others. The article concludes by delineating the critical role of signal processing in the new era for wireless communications. △ Less

Submitted 28 September, 2020; v1 submitted 15 April, 2020; originally announced April 2020.

Comments: IEEE Communications Magazine, Accepted

Large intelligent surface (LIS)-based communications: New features and system layouts

Authors: Jide Yuan, Hien Quoc Ngo, Michail Matthaiou

Abstract: The concept of large intelligent surface (LIS)-based communication has recently attracted increasing research attention, where a LIS is considered as an antenna array whose entire surface area is available for radio signal transmission and reception. In order to provide a fundamental understanding of LIS-based communication, this paper studies the uplink performance of LIS-based communication with… ▽ More The concept of large intelligent surface (LIS)-based communication has recently attracted increasing research attention, where a LIS is considered as an antenna array whose entire surface area is available for radio signal transmission and reception. In order to provide a fundamental understanding of LIS-based communication, this paper studies the uplink performance of LIS-based communication with matched filtering in the presence of a line-of-sight channel. We first study the new features introduced by LIS. In particular, the array gain, spatial resolution, and the capability of interference suppression are theoretically presented and characterized. Then, we study two possible LIS system layouts, i.e., centralized LIS (C-LIS) and distributed LIS (D-LIS), and propose a user association scheme aiming to maximize the minimum user spectral efficiency (SE). Simulation results compare the achievable SE between two system layouts. We observe that the proposed user association algorithm significantly improves the performance of D-LIS, and with the help of it, the per-user achievable SE in D-LIS outperforms that in C-LIS in most considered scenarios. △ Less

Submitted 27 February, 2020; originally announced February 2020.

Comments: 7 pages, 4 figures, to appear at IEEE ICC 2020

Massive MIMO Asymptotics for Ray-Based Propagation Channels

Authors: Shuang Li, Peter Smith, Pawel Dmochowski, Harsh Tataria, Michail Matthaiou, **gwei Yin

Abstract: Favorable propagation (FP) and channel hardening (CH) are desired properties in massive multiple-input multiple-output (MIMO) systems. To date, these properties have primarily been analyzed for classical \textit{statistical} channel models, or \textit{ray-based} models with very specific angular parameters and distributions. This paper presents a thorough mathematical analysis of the asymptotic sy… ▽ More Favorable propagation (FP) and channel hardening (CH) are desired properties in massive multiple-input multiple-output (MIMO) systems. To date, these properties have primarily been analyzed for classical \textit{statistical} channel models, or \textit{ray-based} models with very specific angular parameters and distributions. This paper presents a thorough mathematical analysis of the asymptotic system behavior for ray-based channels with \textit{arbitrary} ray distributions, and considers \textit{two} types of antenna array structures at the cellular base station: a uniform linear array (ULA) and a uniform planar array (UPA). In addition to FP and channel hardening, we analyze the \textit{large system potential} (LSP) which measures the asymptotic ratio of the expected power in the desired channel to the expected total interference power when both the antenna and user numbers grow. LSP is said to hold when this ratio converges to a positive constant. The results demonstrate that while FP is guaranteed in ray-based channels, CH may or may not occur depending on the nature of the model. Furthermore, we demonstrate that LSP will not normally hold as the expected interference power grows logarithmically for both ULAs and UPAs relative to the power in the desired channel as the system size increases. Nevertheless, we identify some fundamental and attractive properties of massive MIMO in this limiting regime. △ Less

Submitted 26 February, 2020; originally announced February 2020.