-
Can decay heat measurements tell us something about the Reactor Antineutrino Anomaly?
Authors:
A. A. Sonzogni,
R. J. Lorek,
A. Mattera,
E. A. McCutchan
Abstract:
Measurements of the decay energy released as a function of time following the thermal neutron induced fission on $^{235}$U and $^{239,241}$Pu were performed in the 1970s at Oak Ridge National Laboratory with the purpose of quantifying possible Loss Of Coolant Accident scenarios. This decay energy, known in technical parlance as decay heat, is mainly composed of two terms, that of the electrons pro…
▽ More
Measurements of the decay energy released as a function of time following the thermal neutron induced fission on $^{235}$U and $^{239,241}$Pu were performed in the 1970s at Oak Ridge National Laboratory with the purpose of quantifying possible Loss Of Coolant Accident scenarios. This decay energy, known in technical parlance as decay heat, is mainly composed of two terms, that of the electrons produced together with antineutrinos in the beta-minus decay of the neutron-rich fission products, and that of the gammas produced in the subsequent decay of excited nuclear levels. In this work we study if this extensive set of decay heat measurements can be used to assess the Reactor Antineutrino Anomaly, that is, the approximately 5\% deficit of electron antineutrinos produced by nuclear reactors, first deduced by Mention and collaborators in 2011, and observed by the major reactor antineutrino experiments near nuclear power plants since. With the assistance of nuclear databases, we are able to obtain the ratio of electron spectra under equilibrium conditions for $^{235}$U to $^{239}$Pu, in better agreement with the lower trend recently reported by Kopeikin and collaborators, as well as those for $^{235}$U to $^{241}$Pu and $^{241}$Pu to $^{239}$Pu, which do not agree well with those measured at the Insitut Laue-Langevin in the 1980s. We conclude that a new experimental campaign is needed to measure the electron spectra utilizing a high-resolution and signal-to-noise-ratio electron spectrometer and a highly precise fission normalization procedure.
△ Less
Submitted 1 June, 2023; v1 submitted 4 March, 2022;
originally announced March 2022.
-
A Computational Model of Representation Learning in the Brain Cortex, Integrating Unsupervised and Reinforcement Learning
Authors:
Giovanni Granato,
Emilio Cartoni,
Federico Da Rold,
Andrea Mattera,
Gianluca Baldassarre
Abstract:
A common view on the brain learning processes proposes that the three classic learning paradigms -- unsupervised, reinforcement, and supervised -- take place in respectively the cortex, the basal-ganglia, and the cerebellum. However, dopamine outbursts, usually assumed to encode reward, are not limited to the basal ganglia but also reach prefrontal, motor, and higher sensory cortices. We propose t…
▽ More
A common view on the brain learning processes proposes that the three classic learning paradigms -- unsupervised, reinforcement, and supervised -- take place in respectively the cortex, the basal-ganglia, and the cerebellum. However, dopamine outbursts, usually assumed to encode reward, are not limited to the basal ganglia but also reach prefrontal, motor, and higher sensory cortices. We propose that in the cortex the same reward-based trial-and-error processes might support not only the acquisition of motor representations but also of sensory representations. In particular, reward signals might guide trial-and-error processes that mix with associative learning processes to support the acquisition of representations better serving downstream action selection. We tested the soundness of this hypothesis with a computational model that integrates unsupervised learning (Contrastive Divergence) and reinforcement learning (REINFORCE). The model was tested with a task requiring different responses to different visual images grouped in categories involving either colour, shape, or size. Results show that a balanced mix of unsupervised and reinforcement learning processes leads to the best performance. Indeed, excessive unsupervised learning tends to under-represent task-relevant features while excessive reinforcement learning tends to initially learn slowly and then to incur in local minima. These results stimulate future empirical studies on category learning directed to investigate similar effects in the extrastriate visual cortices. Moreover, they prompt further computational investigations directed to study the possible advantages of integrating unsupervised and reinforcement learning processes.
△ Less
Submitted 7 June, 2021;
originally announced June 2021.
-
Disentangling fission fragment evaporation models using TALYS
Authors:
Andreas Solders,
Andrea Mattera,
Ali Al-Adili,
Mattias Lantz,
Vasileios Rakopoulos,
Stephan Pomp
Abstract:
Several computer codes based on phenomenological models are being developed with the aim of obtaining fission observables, such as neutron and gamma multiplicities and product yields. Key points in these calculations, which are handled differently by the various codes, are the sharing of the total excitation energy between the fragments and the generation of angular momenta. After the initial stat…
▽ More
Several computer codes based on phenomenological models are being developed with the aim of obtaining fission observables, such as neutron and gamma multiplicities and product yields. Key points in these calculations, which are handled differently by the various codes, are the sharing of the total excitation energy between the fragments and the generation of angular momenta. After the initial states of the fragments is set, the de-excitation through the emission of neutrons and photons can be model. However, many models also include tunable parameters that are used to make the calculations conform with literature data. As a result, it could be possible to obtain good agreement with experimental results even with questionable assumptions on the initial conditions. To test the assumptions made by different fission models the code DE$\ell$FIN has been developed. DE$\ell$FIN starts with the fission fragments as generated by the models and calculates the average neutron emission as a function of mass in a transparent and coherent way using the nuclear reaction code TALYS. Hence, the probabilities of neutron emission in competition with $γ$ de-excitation comes from parameters of the TALYS code that have not been optimised. The results are then compared looking at general trends and at the difference to what is obtained with the stand-alone versions of the codes. In this study, the output of DE$\ell$FIN for five of the most commonly used fission codes is compared to the results of the stand-alone versions, and to experimental data, for the reactions $^{235}$U(n$_{\mathrm{th}}$,f), $^{239}$Pu(n$_{\mathrm{th}}$,f) and $^{252}$Cf(sf).
△ Less
Submitted 21 February, 2019;
originally announced February 2019.
-
Isomeric fission yield ratios for odd-mass Cd and In isotopes using the Phase-Imaging Ion-Cyclotron-Resonance technique
Authors:
V. Rakopoulos,
M. Lantz,
S. Pomp,
A. Solders,
A. Al-Adili,
L. Canete,
T. Eronen,
A. Jokinen,
A. Kankainen,
A. Mattera,
I. D. Moore,
D. A. Nesterenko,
M. Reponen,
S. Rinta-Antila,
A. de Roubin,
M. Vilén,
M. Österlund,
H. Penttilä
Abstract:
Isomeric yield ratios for the odd-$A$ isotopes of $^{119-127}$Cd and $^{119-127}$In from 25-MeV proton-induced fission on natural uranium have been measured at the JYFLTRAP double Penning trap, by employing the Phase-Imaging Ion-Cyclotron-Resonance technique. With the significantly improved mass resolution of this novel method isomeric states separated by 140 keV from the ground state, and with ha…
▽ More
Isomeric yield ratios for the odd-$A$ isotopes of $^{119-127}$Cd and $^{119-127}$In from 25-MeV proton-induced fission on natural uranium have been measured at the JYFLTRAP double Penning trap, by employing the Phase-Imaging Ion-Cyclotron-Resonance technique. With the significantly improved mass resolution of this novel method isomeric states separated by 140 keV from the ground state, and with half-lives of the order of 500 ms, could be resolved. This opens the door for obtaining new information on low-lying isomers, of importance for nuclear structure, fission and astrophysics. In the present work the experimental isomeric yield ratios are used for the estimation of the root-mean-square angular momentum ($J_\mathrm{rms}$) of the primary fragments. The results show a dependency on the number of unpaired protons and neutrons, where the odd-$Z$ In isotopes carry larger angular momenta. The deduced values of $J_\mathrm{rms}$ display a linear relationship when compared with the electric quadrupole moments of the fission products.
△ Less
Submitted 12 November, 2018;
originally announced November 2018.
-
Ion counting efficiencies at the IGISOL facility
Authors:
A. Al-Adili,
K. Jansson,
M. Lantz,
A. Solders,
C. Gustavsson,
A. Mattera,
A. V. Prokofiev,
V. Rakopoulos,
D. Tarrío,
S. Wiberg,
M. Österlund,
S. Pomp
Abstract:
At the IGISOL-JYFLTRAP facility, fission mass yields can be studied at high precision. Fission fragments from a U target are passing through a Ni foil and entering a gas filled chamber. The collected fragments are guided through a mass separator to a Penning trap where their masses are identified. This simulation work focuses on how different fission fragment properties (mass, charge and energy) a…
▽ More
At the IGISOL-JYFLTRAP facility, fission mass yields can be studied at high precision. Fission fragments from a U target are passing through a Ni foil and entering a gas filled chamber. The collected fragments are guided through a mass separator to a Penning trap where their masses are identified. This simulation work focuses on how different fission fragment properties (mass, charge and energy) affect the stop** efficiency in the gas cell. In addition, different experimental parameters are varied (e. g. U and Ni thickness and He gas pressure) to study their impact on the stop** efficiency. The simulations were performed using the Geant4 package and the SRIM code. The main results suggest a small variation in the stop** efficiency as a function of mass, charge and kinetic energy. It is predicted that heavy fragments are stopped about 9% less efficiently than the light fragments. However it was found that the properties of the U, Ni and the He gas influences this behavior. Hence it could be possible to optimize the efficiency.
△ Less
Submitted 2 September, 2014;
originally announced September 2014.
-
Design of a High Intensity Neutron Source for Neutron-Induced Fission Yield Studies
Authors:
M. Lantz,
D. Gorelov,
A. Jokinen,
V. S. Kolhinen,
A. Mattera,
H. Penttilä,
S. Pomp,
V. Rakopoulos,
S. Rinta-Antila,
A. Solders
Abstract:
The upgraded IGISOL facility with JYFLTRAP, at the accelerator laboratory of the University of Jyväskylä, has been supplied with a new cyclotron which will provide protons of the order of 100 μA with up to 30 MeV energy, or deuterons with half the energy and intensity. This makes it an ideal place for measurements of neutron-induced fission products from various actinides, in view of proposed futu…
▽ More
The upgraded IGISOL facility with JYFLTRAP, at the accelerator laboratory of the University of Jyväskylä, has been supplied with a new cyclotron which will provide protons of the order of 100 μA with up to 30 MeV energy, or deuterons with half the energy and intensity. This makes it an ideal place for measurements of neutron-induced fission products from various actinides, in view of proposed future nuclear fuel cycles. The groups at Uppsala University and University of Jyväskylä are working on the design of a neutron converter that will be used as neutron source in fission yield studies. The design is based on simulations with Monte Carlo codes and a benchmark measurement that was recently performed at The Svedberg Laboratory in Uppsala. In order to obtain a competitive count rate the fission targets will be placed very close to the neutron converter. The goal is to have a flexible design that will enable the use of neutron fields with different energy distributions. In the present paper, some considerations for the design of the neutron converter will be discussed, together with different scenarios for which fission targets and neutron energies to focus on.
△ Less
Submitted 9 April, 2013;
originally announced April 2013.
-
Characterization of a Be(p,xn) neutron source for fission yields measurements
Authors:
A. Mattera,
P. Andersson,
A. Hjalmarsson,
M. Lantz,
S. Pomp,
V. Rakopoulos,
A. Solders,
J. Valldor-Blücher,
D. Gorelov,
H. Penttilä,
S. Rinta-Antila,
A. V. Prokofiev,
E. Passoth,
R. Bedogni,
A. Gentile,
D. Bortot,
A. Esposito,
M. V. Introini,
A. Pola
Abstract:
We report on measurements performed at The Svedberg Laboratory (TSL) to characterize a proton-neutron converter for independent fission yield studies at the IGISOL-JYFLTRAP facility (Jyväskylä, Finland). A 30 MeV proton beam im**ed on a 5 mm water-cooled Beryllium target. Two independent experimental techniques have been used to measure the neutron spectrum: a Time of Flight (TOF) system used to…
▽ More
We report on measurements performed at The Svedberg Laboratory (TSL) to characterize a proton-neutron converter for independent fission yield studies at the IGISOL-JYFLTRAP facility (Jyväskylä, Finland). A 30 MeV proton beam im**ed on a 5 mm water-cooled Beryllium target. Two independent experimental techniques have been used to measure the neutron spectrum: a Time of Flight (TOF) system used to estimate the high-energy contribution, and a Bonner Sphere Spectrometer able to provide precise results from thermal energies up to 20 MeV. An overlap between the energy regions covered by the two systems will permit a cross-check of the results from the different techniques. In this paper, the measurement and analysis techniques will be presented together with some preliminary results.
△ Less
Submitted 2 April, 2013;
originally announced April 2013.
-
Accurate fission data for nuclear safety
Authors:
A. Solders,
D. Gorelov,
A. Jokinen,
V. S. Kolhinen,
M. Lantz,
A. Mattera,
H. Penttila,
S. Pomp,
V. Rakopoulos,
S. Rinta-Antila
Abstract:
The Accurate fission data for nuclear safety (AlFONS) project aims at high precision measurements of fission yields, using the renewed IGISOL mass separator facility in combination with a new high current light ion cyclotron at the University of Jyvaskyla. The 30 MeV proton beam will be used to create fast and thermal neutron spectra for the study of neutron induced fission yields. Thanks to a ser…
▽ More
The Accurate fission data for nuclear safety (AlFONS) project aims at high precision measurements of fission yields, using the renewed IGISOL mass separator facility in combination with a new high current light ion cyclotron at the University of Jyvaskyla. The 30 MeV proton beam will be used to create fast and thermal neutron spectra for the study of neutron induced fission yields. Thanks to a series of mass separating elements, culminating with the JYFLTRAP Penning trap, it is possible to achieve a mass resolving power in the order of a few hundred thousands.
In this paper we present the experimental setup and the design of a neutron converter target for IGISOL. The goal is to have a flexible design. For studies of exotic nuclei far from stability a high neutron flux (10^12 neutrons/s) at energies 1 - 30 MeV is desired while for reactor applications neutron spectra that resembles those of thermal and fast nuclear reactors are preferred. It is also desirable to be able to produce (semi-)monoenergetic neutrons for benchmarking and to study the energy dependence of fission yields.
The scientific program is extensive and is planed to start in 2013 with a measurement of isomeric yield ratios of proton induced fission in uranium. This will be followed by studies of independent yields of thermal and fast neutron induced fission of various actinides.
△ Less
Submitted 8 April, 2013; v1 submitted 12 March, 2013;
originally announced March 2013.
