-
Ultrafast evanescent heat transfer across solid interfaces via hyperbolic phonon polaritons in hexagonal boron nitride
Authors:
William Hutchins,
John A. Tomko,
Dan M. Hirt,
Saman Zare,
Joseph R. Matson,
Katja Diaz-Granados,
Mingze He,
Thomas Pfeifer,
Jiahan Li,
James Edgar,
Jon-Paul Maria,
Joshua D. Caldwell,
Patrick E. Hopkins
Abstract:
The efficiency of phonon-mediated heat transport is limited by the intrinsic atomistic properties of materials, seemingly providing an upper limit to heat transfer in materials and across their interfaces. The typical speeds of conductive transport, which are inherently limited by the chemical bonds and atomic masses, dictate how quickly heat will move in solids. Given that phonon-polaritons, or c…
▽ More
The efficiency of phonon-mediated heat transport is limited by the intrinsic atomistic properties of materials, seemingly providing an upper limit to heat transfer in materials and across their interfaces. The typical speeds of conductive transport, which are inherently limited by the chemical bonds and atomic masses, dictate how quickly heat will move in solids. Given that phonon-polaritons, or coupled phonon-photon modes, can propagate at speeds approaching 1 percent of the speed of light - orders of magnitude faster than transport within a pure diffusive phonon conductor - we demonstrate that volume-confined, hyperbolic phonon-polariton(HPhP) modes supported by many biaxial polar crystals can couple energy across solid-solid interfaces at an order of magnitude higher rates than phonon-phonon conduction alone. Using pump-probe thermoreflectance with a mid-infrared, tunable, probe pulse with sub-picosecond resolution, we demonstrate remote and spectrally selective excitation of the HPhP modes in hexagonal boron nitride in response to radiative heating from a thermally emitting gold source. Our work demonstrates a new avenue for interfacial heat transfer based on broadband radiative coupling from a hot spot in a gold film to hBN HPhPs, independent of the broad spectral mismatch between the pump(visible) and probe(mid-IR) pulses employed. This methodology can be used to bypass the intrinsically limiting phonon-phonon conductive pathway, thus providing an alternative means of heat transfer across interfaces. Further, our time-resolved measurements of the temperature changes of the HPhP modes in hBN show that through polaritonic coupling, a material can transfer heat across and away from an interface at rates orders of magnitude faster than diffusive phonon speeds intrinsic to the material, thus demonstrating a pronounced thermal transport enhancement in hBN via phonon-polariton coupling.
△ Less
Submitted 20 February, 2024; v1 submitted 17 January, 2024;
originally announced January 2024.
-
Interface quality in GaSb/AlSb short period superlattices
Authors:
Md Nazmul Alam,
Joseph R. Matson,
Patrick Sohr,
Joshua D. Caldwell,
Stephanie Law
Abstract:
Heterostructures including the members of the 6.1Å semiconductor family (AlSb, GaSb, and InAs) are used in infrared optoelectronic devices as well as a variety of other applications. Short-period superlattices of these materials are also of interest for creating composite materials with designer infrared dielectric functions. The conditions needed to create sharp InAs/GaSb and InAs/AlSb interfaces…
▽ More
Heterostructures including the members of the 6.1Å semiconductor family (AlSb, GaSb, and InAs) are used in infrared optoelectronic devices as well as a variety of other applications. Short-period superlattices of these materials are also of interest for creating composite materials with designer infrared dielectric functions. The conditions needed to create sharp InAs/GaSb and InAs/AlSb interfaces are well known, but the AlSb/GaSb interface is much less well-understood. In this article, we test a variety of interventions designed to improve interface sharpness in AlSb/GaSb short-period superlattices. These interventions include substrate temperature, III:Sb flux ratio, and the use of a bismuth surfactant. Superlattices are characterized by high-resolution x-ray diffraction and infrared spectroscopy. We find that AlSb/GaSb short-period superlattices have a wide growth window over which sharp interfaces can be obtained.
△ Less
Submitted 16 September, 2021;
originally announced September 2021.
-
Nanoscale Phonon Spectroscopy Reveals Emergent Interface Vibrational Structure of Superlattices
Authors:
Eric R. Hoglund,
De-Liang Bao,
Andrew O'Hara,
Sara Makarem,
Zachary T. Piontkowski,
Joseph R. Matson,
Ajay K. Yadav,
Ryan C. Haisimaier,
Roman Engel-Herbert,
Jon F. Ihlefeld,
Jayakanth Ravichandran,
Ramamoorthy Ramesh,
Joshua D. Caldwell,
Thomas E. Beechem,
John A. Tomko,
Jordan A. Hachtel,
Sokrates T. Pantelides,
Patrick E. Hopkins,
James M. Howe
Abstract:
As the length-scales of materials decrease, heterogeneities associated with interfaces approach the importance of the surrounding materials. Emergent electronic and magnetic interface properties in superlattices have been studied extensively by both experiments and theory. $^{1-6}$ However, the presence of interfacial vibrations that impact phonon-mediated responses, like thermal conductivity…
▽ More
As the length-scales of materials decrease, heterogeneities associated with interfaces approach the importance of the surrounding materials. Emergent electronic and magnetic interface properties in superlattices have been studied extensively by both experiments and theory. $^{1-6}$ However, the presence of interfacial vibrations that impact phonon-mediated responses, like thermal conductivity $^{7,8}$, has only been inferred in experiments indirectly. While it is accepted that intrinsic phonons change near boundaries $^{9,10}$, the physical mechanisms and length-scales through which interfacial effects influence materials remain unclear. Herein, we demonstrate the localized vibrational response associated with the interfaces in SrTiO$_3$-CaTiO$_3$ superlattices by combining advanced scanning transmission electron microscopy imaging and spectroscopy and density-functional-theory calculations. Symmetries atypical of either constituent material are observed within a few atomic planes near the interface. The local symmetries create local phonon modes that determine the global response of the superlattice once the spacing of the interfaces approaches the phonon spatial extent. The results provide direct visualization and quantification, illustrating the progression of the local symmetries and interface vibrations as they come to determine the vibrational response of an entire superlattice; stated differently, the progression from a material with interfaces, to a material dominated by interfaces, to a material of interfaces as the period decreases. Direct observation of such local atomic and vibrational phenomena demonstrates that their spatial extent needs to be quantified to understand macroscopic behavior. Tailoring interfaces, and knowing their local vibrational response, provides a means of pursuing designer solids having emergent infrared and thermal responses.
△ Less
Submitted 4 October, 2021; v1 submitted 20 May, 2021;
originally announced May 2021.
-
Infrared permittivity of the biaxial van der Waals semiconductor $α$-MoO$_3$ from near- and far-field correlative studies
Authors:
Gonzalo Álvarez-Pérez,
Thomas G. Folland,
Ion Errea,
Javier Taboada-Gutiérrez,
Jiahua Duan,
Javier Martín-Sánchez,
Ana I. F. Tresguerres-Mata,
Joseph R. Matson,
Andrei Bylinkin,
Mingze He,
Weiliang Ma,
Qiaoliang Bao,
José Ignacio Martín,
Joshua D. Caldwell,
Alexey Y. Nikitin,
Pablo Alonso-González
Abstract:
The biaxial van der Waals semiconductor $α$-phase molybdenum trioxide ($α$-MoO$_3$) has recently received significant attention due to its ability to support highly anisotropic phonon polaritons (PhPs) -infrared (IR) light coupled to lattice vibrations in polar materials-, offering an unprecedented platform for controlling the flow of energy at the nanoscale. However, to fully exploit the extraord…
▽ More
The biaxial van der Waals semiconductor $α$-phase molybdenum trioxide ($α$-MoO$_3$) has recently received significant attention due to its ability to support highly anisotropic phonon polaritons (PhPs) -infrared (IR) light coupled to lattice vibrations in polar materials-, offering an unprecedented platform for controlling the flow of energy at the nanoscale. However, to fully exploit the extraordinary IR response of this material, an accurate dielectric function is required. Here, we report the accurate IR dielectric function of $α$-MoO$_3$ by modelling far-field, polarized IR reflectance spectra acquired on a single thick flake of this material. Unique to our work, the far-field model is refined by contrasting the experimental dispersion and dam** of PhPs, revealed by polariton interferometry using scattering-type scanning near-field optical microscopy (s-SNOM) on thin flakes of $α$-MoO$_3$, with analytical and transfer-matrix calculations, as well as full-wave simulations. Through these correlative efforts, exceptional quantitative agreement is attained to both far- and near-field properties for multiple flakes, thus providing strong verification of the accuracy of our model, while offering a novel approach to extracting dielectric functions of nanomaterials, usually too small or inhomogeneous for establishing accurate models only from standard far-field methods. In addition, by employing density functional theory (DFT), we provide insights into the various vibrational states dictating our dielectric function model and the intriguing optical properties of $α$-MoO$_3$.
△ Less
Submitted 4 June, 2020; v1 submitted 12 December, 2019;
originally announced December 2019.
-
Probing hyperbolic polaritons using infrared attenuated total reflectance micro-spectroscopy
Authors:
Thomas G. Folland,
Tobias W. W. Maß,
Joseph R. Matson,
J. Ryan Nolen,
Song Liu,
Kenji Watanabe,
Takashi Taniguchi,
James H. Edgar,
Thomas Taubner,
Joshua D. Caldwell
Abstract:
Hyperbolic polariton modes are highly appealing for a broad range of applications in nanophotonics, including surfaced enhanced sensing, sub-diffractional imaging and reconfigurable metasurfaces. Here we show that attenuated total reflectance micro-spectroscopy (ATR) using standard spectroscopic tools can launch hyperbolic polaritons in a Kretschmann-Raether configuration. We measure multiple hype…
▽ More
Hyperbolic polariton modes are highly appealing for a broad range of applications in nanophotonics, including surfaced enhanced sensing, sub-diffractional imaging and reconfigurable metasurfaces. Here we show that attenuated total reflectance micro-spectroscopy (ATR) using standard spectroscopic tools can launch hyperbolic polaritons in a Kretschmann-Raether configuration. We measure multiple hyperbolic and dielectric modes within the naturally hyperbolic material hexagonal boron nitride as a function of different isotopic enrichments and flake thickness. This overcomes the technical challenges of measurement approaches based on nanostructuring, or scattering scanning nearfield optical microscopy. Ultimately, our ATR approach allows us to compare the optical properties of small-scale materials prepared by different techniques systematically
△ Less
Submitted 1 October, 2018;
originally announced October 2018.
-
Reconfigurable Mid-Infrared Hyperbolic Metasurfaces using Phase-Change Materials
Authors:
Thomas G. Folland,
Alireza Fali,
Samuel T. White,
Joseph R. Matson,
Song Liu,
Neda A. Aghamiri,
James H. Edgar,
Richard F. Haglund,
Yohannes Abate,
Joshua D. Caldwell
Abstract:
Metasurfaces offer the potential to control light propagation at the nanoscale for applications in both free-space and surface-confined geometries. Existing metasurfaces frequently utilize metallic polaritonic elements with high absorption losses, and/or fixed geometrical designs that serve a single function. Here we overcome these limitations by demonstrating a reconfigurable hyperbolic metasurfa…
▽ More
Metasurfaces offer the potential to control light propagation at the nanoscale for applications in both free-space and surface-confined geometries. Existing metasurfaces frequently utilize metallic polaritonic elements with high absorption losses, and/or fixed geometrical designs that serve a single function. Here we overcome these limitations by demonstrating a reconfigurable hyperbolic metasurface comprising of a heterostructure of isotopically enriched hexagonal boron nitride (hBN) in direct contact with the phase-change material (PCM) vanadium dioxide (VO2). Spatially localized metallic and dielectric domains in VO2 change the wavelength of the hyperbolic phonon polaritons (HPhPs) supported in hBN by a factor 1.6 at 1450cm-1. This induces in-plane launching, refraction and reflection of HPhPs in the hBN, proving reconfigurable control of in-plane HPhP propagation at the nanoscale15. These results exemplify a generalizable framework based on combining hyperbolic media and PCMs in order to design optical functionalities such as resonant cavities, beam steering, waveguiding and focusing with nanometric control.
△ Less
Submitted 21 May, 2018;
originally announced May 2018.
-
Nanoscale map** and spectroscopy of non-radiative hyperbolic modes in hexagonal boron nitride nanostructures
Authors:
Lisa V. Brown,
Marcelo Davanco,
Zhiyuan Sun,
Andrey Kretinin,
Yiguo Chen,
Joseph R. Matson,
Igor Vurgaftman,
Nicholas Sharac,
Alexander Giles,
Michael M. Fogler,
Takashi Taniguchi,
Kenji Watanabe,
Kostya Novoselov,
Stefan A. Maier,
Andrea Centrone,
Joshua D. Caldwell
Abstract:
The inherent crystal anisotropy of hexagonal boron nitride (hBN) sustains naturally hyperbolic phonon polaritons, i.e. polaritons that can propagate with very large wavevectors within the material volume, thereby enabling optical confinement to exceedingly small dimensions. Indeed, previous research has shown that nanometer-scale truncated nanocone hBN cavities, with deep subwavelength dimensions,…
▽ More
The inherent crystal anisotropy of hexagonal boron nitride (hBN) sustains naturally hyperbolic phonon polaritons, i.e. polaritons that can propagate with very large wavevectors within the material volume, thereby enabling optical confinement to exceedingly small dimensions. Indeed, previous research has shown that nanometer-scale truncated nanocone hBN cavities, with deep subwavelength dimensions, support three-dimensionally confined optical modes in the mid-infrared. Due to optical selection rules, only a few of many such modes predicted theoretically have been observed experimentally via far-field reflection and scattering-type scanning near-field optical microscopy. The Photothermal induced resonance (PTIR) technique probes optical and vibrational resonances overcoming weak far-field emission by leveraging an atomic force microscope (AFM) probe to transduce local sample expansion due to light absorption. Here we show that PTIR enables the direct observation of previously unobserved, dark hyperbolic modes of hBN nanostructures. Leveraging these optical modes could yield a new degree of control over the electromagnetic near-field concentration, polarization and angular momentum in nanophotonic applications.
△ Less
Submitted 27 October, 2017;
originally announced October 2017.