Showing 1–50 of 72 results for author: Matsko, A

Dispersive-wave-agile optical frequency division

Authors: Qing-Xin Ji, Wei Zhang, Peng Liu, Warren **, Joel Guo, Jonathan Peters, Lue Wu, Avi Feshali, Mario Paniccia, Vladimir Ilchenko, John Bowers, Andrey Matsko, Kerry Vahala

Abstract: The remarkable frequency stability of resonant systems in the optical domain (optical cavities and atomic transitions) can be harnessed at frequency scales accessible by electronics using optical frequency division. This capability is revolutionizing technologies spanning time kee** to high-performance electrical signal sources. A version of the technique called 2-point optical frequency divisio… ▽ More The remarkable frequency stability of resonant systems in the optical domain (optical cavities and atomic transitions) can be harnessed at frequency scales accessible by electronics using optical frequency division. This capability is revolutionizing technologies spanning time kee** to high-performance electrical signal sources. A version of the technique called 2-point optical frequency division (2P-OFD) is proving advantageous for application to high-performance signal sources. In 2P-OFD, an optical cavity anchors two spectral endpoints defined by lines of a frequency comb. The comb need not be self-referenced, which greatly simplifies the system architecture and reduces power requirements. Here, a 2P-OFD microwave signal source is demonstrated with record-low phase noise using a microcomb. Key to this advance is a spectral endpoint defined by a frequency agile single-mode dispersive wave that is emitted by the microcomb soliton. Moreover, the system frequency reference is a compact all-solid-state optical cavity with a record Q-factor. The results advance integrable microcomb-based signal sources into the performance realm of much larger microwave sources. △ Less

Submitted 1 March, 2024; originally announced March 2024.

Photonic chip-based low noise microwave oscillator

Authors: Igor Kudelin, William Groman, Qing-Xin Ji, Joel Guo, Megan L. Kelleher, Dahyeon Lee, Takuma Nakamura, Charles A. McLemore, Pedram Shirmohammadi, Samin Hanifi, Haotian Cheng, Naijun **, Sam Halliday, Zhaowei Dai, Lue Wu, Warren **, Yifan Liu, Wei Zhang, Chao Xiang, Vladimir Iltchenko, Owen Miller, Andrey Matsko, Steven Bowers, Peter T. Rakich, Joe C. Campbell , et al. (4 additional authors not shown)

Abstract: Numerous modern technologies are reliant on the low-phase noise and exquisite timing stability of microwave signals. Substantial progress has been made in the field of microwave photonics, whereby low noise microwave signals are generated by the down-conversion of ultra-stable optical references using a frequency comb. Such systems, however, are constructed with bulk or fiber optics and are diffic… ▽ More Numerous modern technologies are reliant on the low-phase noise and exquisite timing stability of microwave signals. Substantial progress has been made in the field of microwave photonics, whereby low noise microwave signals are generated by the down-conversion of ultra-stable optical references using a frequency comb. Such systems, however, are constructed with bulk or fiber optics and are difficult to further reduce in size and power consumption. Our work addresses this challenge by leveraging advances in integrated photonics to demonstrate low-noise microwave generation via two-point optical frequency division. Narrow linewidth self-injection locked integrated lasers are stabilized to a miniature Fabry-Pérot cavity, and the frequency gap between the lasers is divided with an efficient dark-soliton frequency comb. The stabilized output of the microcomb is photodetected to produce a microwave signal at 20 GHz with phase noise of -96 dBc/Hz at 100 Hz offset frequency that decreases to -135 dBc/Hz at 10 kHz offset--values which are unprecedented for an integrated photonic system. All photonic components can be heterogeneously integrated on a single chip, providing a significant advance for the application of photonics to high-precision navigation, communication and timing systems. △ Less

Submitted 17 July, 2023; originally announced July 2023.

Engineered zero-dispersion microcombs using CMOS-ready photonics

Authors: Qing-Xin Ji, Warren **, Lue Wu, Yan Yu, Zhiquan Yuan, Wei Zhang, Maodong Gao, Bohan Li, Heming Wang, Chao Xiang, Joel Guo, Avi Feshali, Mario Paniccia, Vladimir S. Ilchenko, Andrey B. Matsko, John Bowers, Kerry Vahala

Abstract: Normal group velocity dispersion (GVD) microcombs offer high comb line power and high pum** efficiency compared to bright pulse microcombs. The recent demonstration of normal GVD microcombs using CMOS-foundry-produced microresonators is an important step towards scalable production. However, the chromatic dispersion of CMOS devices is large and impairs generation of broadband microcombs. Here, w… ▽ More Normal group velocity dispersion (GVD) microcombs offer high comb line power and high pum** efficiency compared to bright pulse microcombs. The recent demonstration of normal GVD microcombs using CMOS-foundry-produced microresonators is an important step towards scalable production. However, the chromatic dispersion of CMOS devices is large and impairs generation of broadband microcombs. Here, we report the development of a microresonator in which GVD is reduced due to a couple-ring resonator configuration. Operating in the turnkey self-injection-locking mode, the resonator is hybridly integrated with a semiconductor laser pump to produce high-power-efficiency combs spanning a bandwidth of 9.9 nm (1.22 THz) centered at 1560 nm, corresponding to 62 comb lines. Fast, linear optical sampling of the comb waveform is used to observe the rich set of near-zero GVD comb behaviors, including soliton molecules, switching waves (platicons) and their hybrids. Tuning of the 20 GHz repetition rate by electrical actuation enables servo locking to a microwave reference, which simultaneously stabilizes the comb repetition rate, offset frequency and temporal waveform. This hybridly integrated system could be used in coherent communications or for ultra-stable microwave signal generation by two-point optical frequency division. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Comments: 8 pages, 4 figures

Optimized frequency comb spectrum of parametrically modulated bottle microresonators

Authors: M. Crespo-Ballesteros, A. B. Matsko, M. Sumetsky

Abstract: The formation of optical frequency combs (OFCs) by the parametric modulation of optical microresonators is commonly described by lumped-parameter models. However, these models do not consider the actual spatial distribution of the parametric modulation (SDPM). Here, we show that the effect of the SDPM becomes of special importance for an elongated SNAP bottle microresonator (SBM) having shallow na… ▽ More The formation of optical frequency combs (OFCs) by the parametric modulation of optical microresonators is commonly described by lumped-parameter models. However, these models do not consider the actual spatial distribution of the parametric modulation (SDPM). Here, we show that the effect of the SDPM becomes of special importance for an elongated SNAP bottle microresonator (SBM) having shallow nanometre-scale effective radius variation along its axial length. The advantage of SBMs compared to microresonators with different shapes (e.g., spherical and toroidal) is that SBMs, remaining miniature, can have resonant spectrum with much smaller free spectral range and no dispersion. Therefore, SBMs can be used to generate OFCs with much lower repetition rates. We consider the resonant and adiabatic modulation of parabolic SBMs and show that it is possible to improve the flatness and increase the bandwidth of the generated OFC spectra by optimising the SDPM. We suggest that the determined optimal SDPM can be experimentally realized using piezoelectric, radiation pressure, and electro-optical excitation of an SBM. △ Less

Submitted 2 November, 2022; originally announced November 2022.

Comments: 16 pages, 6 figures

Parametrically driven inertial sensing in chip-scale optomechanical cavities at the thermodynamical limits with extended dynamic range

Authors: Jaime Gonzalo Flor Flores, Talha Yerebakan, Wenting Wang, Mingbin Yu, Dim-Lee Kwong, Andrey Matsko, Chee Wei Wong

Abstract: Recent scientific and technological advances have enabled the detection of gravitational waves, autonomous driving, and the proposal of a communications network on the Moon (Lunar Internet or LunaNet). These efforts are based on the measurement of minute displacements and correspondingly the forces or fields transduction, which translate to acceleration, velocity, and position determination for na… ▽ More Recent scientific and technological advances have enabled the detection of gravitational waves, autonomous driving, and the proposal of a communications network on the Moon (Lunar Internet or LunaNet). These efforts are based on the measurement of minute displacements and correspondingly the forces or fields transduction, which translate to acceleration, velocity, and position determination for navigation. State-of-the-art accelerometers use capacitive or piezo resistive techniques, and micro-electromechanical systems (MEMS) via integrated circuit (IC) technologies in order to drive the transducer and convert its output for electric readout. In recent years, laser optomechanical transduction and readout have enabled highly sensitive detection of motional displacement. Here we further examine the theoretical framework for the novel mechanical frequency readout technique of optomechanical transduction when the sensor is driven into oscillation mode [8]. We demonstrate theoretical and physical agreement and characterize the most relevant performance parameters with a device with 1.5mg/Hz acceleration sensitivity, a 2.5 fm/Hz1/2 displacement resolution corresponding to a 17.02 ug/Hz1/2 force-equivalent acceleration, and a 5.91 Hz/nW power sensitivity, at the thermodynamical limits. In addition, we present a novel technique for dynamic range extension while maintaining the precision sensing sensitivity. Our inertial accelerometer is integrated on-chip, and enabled for packaging, with a laser-detuning-enabled approach. △ Less

Submitted 30 October, 2022; originally announced October 2022.

AtOMICS: A neural network-based Automated Optomechanical Intelligent Coupling System for testing and characterization of silicon photonics chiplets

Authors: Jaime Gonzalo Flor Flores, Connor Nasseraddin, Jim Solomon, Talha Yerebakan, Andrey B. Matsko, Chee Wei Wong

Abstract: Recent advances in silicon photonics promise to revolutionize modern technology by improving performance of everyday devices in multiple fields. However, as the industry moves into a mass fabrication phase, the problem of effective testing of integrated silicon photonics devices remains to be solved. A cost-efficient manner that reduces schedule risk needs to involve automated testing of multiple… ▽ More Recent advances in silicon photonics promise to revolutionize modern technology by improving performance of everyday devices in multiple fields. However, as the industry moves into a mass fabrication phase, the problem of effective testing of integrated silicon photonics devices remains to be solved. A cost-efficient manner that reduces schedule risk needs to involve automated testing of multiple devices that share common characteristics such as input-output coupling mechanisms, but at the same time needs to be generalizable to multiple types of devices and scenarios. In this paper we present a neural network-based automated system designed for in-plane fiber-chip-fiber testing, characterization, and active alignment of silicon photonic devices that use process-design-kit library edge couplers. The presented approach combines state-of-the-art computer vision techniques with time-series analysis, in order to control a testing setup that can process multiple devices and can be easily tuned to incorporate additional hardware. The system can operate at vacuum or atmospheric pressures and maintains stability for fairly long time periods in excess of a month. △ Less

Submitted 30 October, 2022; originally announced October 2022.

Broadband Coherent Multidimensional Variational Measurement

Authors: Sergey P. Vyatchanin, Albert I. Nazmiev, Andrey B. Matsko

Abstract: Standard Quantum Limit (SQL) of a classical mechanical force detection results from quantum back action perturbing evolution of a mechanical system. In this paper we show that usage of a multidimensional optical transducer may enable a broadband quantum back action evading measurement. We study a corresponding technique for measurement of a resonant signal force acting on a linear mechanical oscil… ▽ More Standard Quantum Limit (SQL) of a classical mechanical force detection results from quantum back action perturbing evolution of a mechanical system. In this paper we show that usage of a multidimensional optical transducer may enable a broadband quantum back action evading measurement. We study a corresponding technique for measurement of a resonant signal force acting on a linear mechanical oscillator coupled to an optical system with three optical modes with separation nearly equal to the mechanical frequency. The measurement is performed by optical pum** of the central optical mode and measuring the light esca** the two other modes. By detecting optimal quadrature components of the optical modes and post-processing the measurement results we are able to exclude the back action in a broad frequency band and characterize the force with sensitivity better than SQL. We discuss how proposed scheme relates to multidimensional system containing quantum-mechanics-free subsystems (QMFS) which can evade the SQL using idea of so called "negative mass". △ Less

Submitted 7 May, 2022; originally announced May 2022.

Comments: 15 pages, 4 figures. arXiv admin note: substantial text overlap with arXiv:2105.02532

Back action evading electro-optical transducer

Authors: A. I. Nazmiev, A. B. Matsko, S. P. Vyatchanin

Abstract: Electro-optical transducers are utilized for upconvertion of radio frequency (RF) signals to the optical frequency domain to study the RF signals with optical tools. The transducers frequently impact on the RF system and introduce additional noise, including optical shot noise as well as quantum back action noise, limiting the measurement accuracy. In this paper we theoretically study a technique… ▽ More Electro-optical transducers are utilized for upconvertion of radio frequency (RF) signals to the optical frequency domain to study the RF signals with optical tools. The transducers frequently impact on the RF system and introduce additional noise, including optical shot noise as well as quantum back action noise, limiting the measurement accuracy. In this paper we theoretically study a technique based on a high efficiency electro-optical phase modulation effect that allows back action evading detection of an RF field quadrature. The main idea of proposed method is independent homodyne detection of two (Stokes and anti-Stokes) optical modes. It allows subsequent postprocessing of the detected signals, which, in turn, results in a broadband back action evading measurement leading to the high sensitivity evaluation of the RF signals. △ Less

Submitted 23 November, 2021; originally announced December 2021.

Comments: 10 pages, 4 figures

QND measurements of photon number in monolithic microcavities

Authors: S. N. Balybin, A. B. Matsko, F. Ya. Khalili, D. V. Strekalov, V. S. Iltchenko, A. A. Savchenkov, N. M. Lebedev, I. A. Bilenko

Abstract: We revisit the idea of quantum nondemolition measurement (QND) of optical quanta via a resonantly enhanced Kerr nonlinearity taking into account quantum back action and show that the monolithic microcavities enable QND measurement of number of quanta in a weak signal field using a spatially overlap** classical probe field. Due to the cross-phase modulation effect, the phase of the probe field ac… ▽ More We revisit the idea of quantum nondemolition measurement (QND) of optical quanta via a resonantly enhanced Kerr nonlinearity taking into account quantum back action and show that the monolithic microcavities enable QND measurement of number of quanta in a weak signal field using a spatially overlap** classical probe field. Due to the cross-phase modulation effect, the phase of the probe field acquires information about the signal number of quanta without altering it. We find the exact solution to the Heisenberg equations of motion of this system and calculate the measurement error, accounting for the optical losses in the measurement path. We identify a realistic approximation to obtain the explicit form of the final conditional quantum state of the signal field, accounting for the undesirable self-phase modulation effect and designing the optimal homodyne measurement of the probe beam to evade this effect. We show that the best modern monolithic microcavities allow achieving the measurement imprecision several times better than the standard quantum limit. △ Less

Submitted 29 November, 2021; originally announced November 2021.

Comments: 9 pages, 2 figures

Mirror-assisted tuning of laser stabilization via self-injection locking to WGM microresonator

Authors: Ramzil Galiev, Nikita Kondratiev, Valery Lobanov, Andrey Matsko, Igor Bilenko

Abstract: Self-injection locking is a dynamic phenomenon which provides passive stabilization of a lasers emission frequency via resonant optical feedback. The stabilization coefficient depends on the level of resonant feedback and quality factor of the external resonant structure creating the feedback. Usually a self-injection locked laser (SIL) involves barely tunable resonant Rayleigh scattering (RRS). I… ▽ More Self-injection locking is a dynamic phenomenon which provides passive stabilization of a lasers emission frequency via resonant optical feedback. The stabilization coefficient depends on the level of resonant feedback and quality factor of the external resonant structure creating the feedback. Usually a self-injection locked laser (SIL) involves barely tunable resonant Rayleigh scattering (RRS). In this work we study theoretically a scheme of a SIL to a high-Q microresonator with drop-port coupled mirror, in which optical feedback level is optimally adjusted by the tuning the drop-port mirror coupling. We show that the additional reflector can improve the laser stabilization and power handling efficiency if compared with the classic RRS-based scheme. △ Less

Submitted 14 August, 2023; v1 submitted 29 June, 2021; originally announced June 2021.

Broadband Dichromatic Variational Measurement

Authors: Sergey P. Vyatchanin, Albert I. Nazmiev, Andrey B. Matsko

Abstract: Standard Quantum Limit (SQL) of a classical mechanical force detection results from quantum back action im**ed by the meter on a probe mechanical transducer perturbed by the force of interest. In this paper we introduce a technique of continuous \vy{broadband} back action avoiding measurements for the case of a resonant signal force acting on a linear mechanical oscillator supporting one of mirr… ▽ More Standard Quantum Limit (SQL) of a classical mechanical force detection results from quantum back action im**ed by the meter on a probe mechanical transducer perturbed by the force of interest. In this paper we introduce a technique of continuous \vy{broadband} back action avoiding measurements for the case of a resonant signal force acting on a linear mechanical oscillator supporting one of mirrors of an optical Michelson-Sagnac Interferometer (MSI). The interferometer with the movable mirror is an opto-mechanical transducer able to support polychromatic probe field. The method involves a dichromatic optical probe resonant with the MSI modes and having frequency separation equal to the mechanical frequency. We show that analyzing each of the harmonics of the probe reflected from the mechanical system separately and postprocessing the measurement results allows excluding the back action in a broad frequency band and measuring the force with sensitivity better than SQL. △ Less

Submitted 6 May, 2021; originally announced May 2021.

Comments: 12 pages, 3 figures

MSC Class: 81 ACM Class: J.2

Journal ref: Phys. Rev. A 104, 023519 (2021)

Broadband Back Action Cancellation in a Dichromatic Variational Measurement

Authors: Sergey P. Vyatchanin, Andrey B. Matsko

Abstract: Quantum back action imposes fundamental sensitivity limits to the majority of quantum measurements. The effect results from the unavoidable contamination of the measured parameter with the quantum noise of a meter. Back action evading measurements take advantage of the quantum correlations introduced by the system under study to the meter and allow overcoming the fundamental limitations. The measu… ▽ More Quantum back action imposes fundamental sensitivity limits to the majority of quantum measurements. The effect results from the unavoidable contamination of the measured parameter with the quantum noise of a meter. Back action evading measurements take advantage of the quantum correlations introduced by the system under study to the meter and allow overcoming the fundamental limitations. The measurements are frequently restricted in their bandwidth due to a finite response time of the system components. Here we show that probing a mechanical oscillator with a dichromatic field with frequencies separated by the oscillator frequency enables independent detection and complete subtraction of the measurement noise associated with the quantum back action. △ Less

Submitted 6 May, 2021; originally announced May 2021.

Comments: 6 pages, 1 figure

MSC Class: 82 ACM Class: J.2

All-Optical Dissipative Discrete Time Crystals

Authors: Hossein Taheri, Andrey B. Matsko, Lute Maleki, Krzysztof Sacha

Abstract: Time crystals are periodic states exhibiting spontaneous symmetry breaking in either time-independent or periodically forced quantum many-body systems. Spontaneous modification of discrete time translation symmetry in a periodically driven physical system can create a discrete time crystal (DTC). DTCs constitute a state of matter with properties such as temporal rigid long-range order and coherenc… ▽ More Time crystals are periodic states exhibiting spontaneous symmetry breaking in either time-independent or periodically forced quantum many-body systems. Spontaneous modification of discrete time translation symmetry in a periodically driven physical system can create a discrete time crystal (DTC). DTCs constitute a state of matter with properties such as temporal rigid long-range order and coherence which are inherently desirable for quantum computing and quantum information processing. Despite their appeal, experimental demonstrations of DTCs are scarce and hence many significant aspects of their behavior remain unexplored. Here, we report the experimental observation and theoretical investigation of photonic DTCs in a Kerr-nonlinear optical microcavity. Empowered by the simultaneous self-injection locking of two independent lasers with arbitrarily large frequency separation to two cavity modes and a dissipative soliton, this room-temperature all-optical platform enables observing novel states like DTCs carrying defects, and realizing long-awaited phenomena such as DTC phase transitions and mutual interactions. To the best of our knowledge, this is the first experimental demonstration of a dissipative DTC, as well as the concurrent self-injection locking of two continuous-wave lasers to different modes of the same family in a Kerr cavity. Combined with monolithic fabrication, it can result in chip-scale DTCs, paving the way for liberating time crystals from sophisticated laboratory setups and propelling them toward real-world applications. △ Less

Submitted 24 October, 2021; v1 submitted 14 December, 2020; originally announced December 2020.

Journal ref: Nature Communications 13, 848 (2022)

Optimization of laser stabilization via self-injection locking to WGM microresonator

Authors: Ramzil R. Galiev, Nikita M. Kondratiev, Valery E. Lobanov, Andrey B. Matsko, Igor A. Bilenko

Abstract: Self-injection locking is a dynamic phenomenon representing stabilization of the emission frequency of an oscillator with a passive cavity enabling frequency filtered coherent feedback to the oscillator cavity. For instance, self-injection locking of a semiconductor laser to a high-quality-factor (high-Q) whispering gallery mode (WGM) microresonator can result in multiple orders of magnitude reduc… ▽ More Self-injection locking is a dynamic phenomenon representing stabilization of the emission frequency of an oscillator with a passive cavity enabling frequency filtered coherent feedback to the oscillator cavity. For instance, self-injection locking of a semiconductor laser to a high-quality-factor (high-Q) whispering gallery mode (WGM) microresonator can result in multiple orders of magnitude reduction of the laser linewidth. The phenomenon was broadly studied in experiments, but its detailed theoretical model allowing improving the stabilization performance does not exist. In this paper we develop such a theory. We introduce five parameters identifying efficiency of the self-injection locking in an experiment, comprising back-scattering efficiency, phase delay between the laser and the high-Q cavities, frequency detuning between the laser and the high-Q cavities, the pump coupling efficiency, the optical path length between the laser and the microresonator. Our calculations show that the laser linewidth can be improved by two orders of magnitude compared with the case of not optimal self-injection locking. We present recommendations on the experimental realization of the optimal self-injection locking regime. The theoretical model provides deeper understanding of the self-injection locking and benefits multiple practical applications of self-injection locked oscillators. △ Less

Submitted 9 June, 2020; originally announced June 2020.

Journal ref: Phys. Rev. Applied 14, 014036 (2020)

Diffraction losses of a Fabry-Perot cavity with nonidentical non-spherical mirrors

Authors: Mikhail V. Poplavskiy, Andrey B. Matsko, Hiroaki Yamamoto, Sergey P. Vyatchanin

Abstract: Optical cavities with both optimized resonant conditions and high quality factors are important metrological tools. In particular, they are used for laser gravitational wave (GW) detectors. It is necessary to suppress the parametric instability by dam** the resonant conditions of harmful higher order optical modes (HOOM) in order to have high cavity powers in GW detectors. This can be achieved e… ▽ More Optical cavities with both optimized resonant conditions and high quality factors are important metrological tools. In particular, they are used for laser gravitational wave (GW) detectors. It is necessary to suppress the parametric instability by dam** the resonant conditions of harmful higher order optical modes (HOOM) in order to have high cavity powers in GW detectors. This can be achieved effectively by using non spherical mirrors in symmetric Fabry-Perot (FP) cavities by increasing roundtrip losses of HOOMs. Fabry-Perot cavities in most of the GW detectors have non-identical mirrors to optimize clip** losses and reduce thermal noise by reducing the beam size on one side of the cavity facing to the beam splitter and recycling cavities. We here present a general method to design non spherical non-identical mirrors in non-symmetric FP cavities to damp HOOMs. The proposed design allows to the suppress the loss of the arm power caused by point absorbers on test masses. △ Less

Submitted 5 May, 2020; originally announced May 2020.

Comments: 12 pages, 10 figures

Report number: LIGO-P2000138

Quantum diffusion of microcavity solitons

Authors: Chengying Bao, Myoung-Gyun Suh, Boqiang Shen, Kemal Şafak, Anan Dai, Heming Wang, Lue Wu, Zhiquan Yuan, Qi-Fan Yang, Andrey B. Matsko, Franz X. Kärtner, Kerry J. Vahala

Abstract: Coherently-pumped (Kerr) solitons in an ideal optical microcavity are expected to undergo random quantum motion that determines fundamental performance limits in applications of soliton microcombs. Here, this diffusive motion and its impact on Kerr soliton timing jitter is studied experimentally. Typically hidden below technical noise contributions, the quantum limit is discerned by measuring coun… ▽ More Coherently-pumped (Kerr) solitons in an ideal optical microcavity are expected to undergo random quantum motion that determines fundamental performance limits in applications of soliton microcombs. Here, this diffusive motion and its impact on Kerr soliton timing jitter is studied experimentally. Typically hidden below technical noise contributions, the quantum limit is discerned by measuring counter-propagating solitons. Their relative motion features only weak interactions and also presents excellent common mode suppression of technical noise. This is in strong contrast to co-propagating solitons which are found to have relative timing jitter well below the quantum limit of a single soliton on account of strong mutual motion correlation. Good agreement is found between theory and experiment. The results establish the fundamental limits to timing jitter in soliton microcombs and provide new insights on multi-soliton physics △ Less

Submitted 14 March, 2020; originally announced March 2020.

Journal ref: Nat. Phys. 17, 462 (2021)

Forced Oscillatory Motion of Trapped Counter-Propagating Solitons

Authors: Chengying Bao, Boqiang Shen, Myoung-Gyun Suh, Heming Wang, Kemal Safak, Anan Dai, Andrey B. Matsko, Franz X. Kartner, Kerry J. Vahala

Abstract: Both the group velocity and phase velocity of two solitons can be synchronized by a Kerr-effect mediated interaction, causing what is known as soliton trap**. Trap** can occur when solitons travel through single-pass optical fibers or when circulating in optical resonators. Here, we demonstrate and theoretically explain a new manifestation of soliton trap** that occurs between counter-propag… ▽ More Both the group velocity and phase velocity of two solitons can be synchronized by a Kerr-effect mediated interaction, causing what is known as soliton trap**. Trap** can occur when solitons travel through single-pass optical fibers or when circulating in optical resonators. Here, we demonstrate and theoretically explain a new manifestation of soliton trap** that occurs between counter-propagating solitons in microresonators. When counter-pum** a microresonator using slightly detuned pump frequencies and in the presence of backscattering, the group velocities of clockwise and counter-clockwise solitons undergo periodic modulation instead of being locked to a constant velocity. Upon emission from the microcavity, the solitons feature a relative oscillatory motion having an amplitude that can be larger than the soliton pulse width. This relative motion introduces a sideband fine structure into the optical spectrum of the counter-propagating solitons. Our results highlight the significance of coherent pum** in determining soliton dynamics within microresonators and add a new dimension to the physics of soliton trap**. △ Less

Submitted 1 March, 2020; originally announced March 2020.

Journal ref: Phys. Rev. A 103, 011501 (2021)

Quartic Kerr solitons

Authors: Hossein Taheri, Andrey B. Matsko

Abstract: Solitons, ubiquitous in nonlinear sciences, are wavepackets which maintain their characteristic shape upon propagation. In optics, they have been observed and extensively studied in optical fibers. The spontaneous generation of a dissipative Kerr soliton (DKS) train in an optical microresonator pumped with continuous wave (CW) coherent light has placed solitons at the heart of optical frequency co… ▽ More Solitons, ubiquitous in nonlinear sciences, are wavepackets which maintain their characteristic shape upon propagation. In optics, they have been observed and extensively studied in optical fibers. The spontaneous generation of a dissipative Kerr soliton (DKS) train in an optical microresonator pumped with continuous wave (CW) coherent light has placed solitons at the heart of optical frequency comb research in recent years. The commonly observed soliton has a ``sech''-shaped envelope resulting from resonator cubic nonlinearity balanced by its quadratic anomalous group velocity dispersion (GVD). Here we exploit the Lagrangian variational method to show that CW pum** of a Kerr microresonator featuring quartic GVD forms a pure quartic soliton (PQS) with Gaussian envelope. We find analytical expressions for pulse parameters in terms of experimentally relevant quantities and derive an area theorem. Predictions of the analytical calculations are validated with extensive numerical simulations. The broader bandwidth and flatter spectral envelope of a PQS, compared to a DKS of the same pulse width and peak power, make it superior for applications requiring small line-to-line power variation in frequency comb harmonics. △ Less

Submitted 23 March, 2019; originally announced March 2019.

Probing 10 μK stability and residual drifts in the cross-polarized dual-mode stabilization of single-crystal ultrahigh-Q optical resonators

Authors: **kang Lim, Wei Liang, Anatoliy A. Savchenkov, Andrey B. Matsko, Lute Maleki, Chee Wei Wong

Abstract: The thermal stability of monolithic optical microresonators is essential for many mesoscopic photonic applications such as ultrastable laser oscillators, photonic microwave clocks, and precision navigation and sensing. Their fundamental performance is largely bounded by thermal instability. Sensitive thermal monitoring can be achieved by utilizing cross-polarized dual-mode beat frequency metrology… ▽ More The thermal stability of monolithic optical microresonators is essential for many mesoscopic photonic applications such as ultrastable laser oscillators, photonic microwave clocks, and precision navigation and sensing. Their fundamental performance is largely bounded by thermal instability. Sensitive thermal monitoring can be achieved by utilizing cross-polarized dual-mode beat frequency metrology, determined by the polarization-dependent thermorefractivity of a single-crystal microresonator, wherein the heterodyne radio-frequency beat pins down the optical mode volume temperature for precision stabilization. Here, we investigate the correlation between the dual-mode beat frequency and the resonator temperature with time and the associated spectral noise of the dual-mode beat frequency in a single-crystal ultrahigh-Q MgF2 resonator to illustrate that dual-mode frequency metrology can potentially be utilized for resonator temperature stabilization reaching the fundamental thermal noise limit in a realistic system. We show a resonator long-term temperature stability of 8.53 μK after stabilization and unveil various sources that hinder the stability from reaching sub-μK in the current system, an important step towards compact precision navigation, sensing and frequency reference architectures. △ Less

Submitted 5 January, 2019; originally announced January 2019.

Comments: 26 pages including supplementary information, 10 figures article

Gyroscope as quantum angular speed meter

Authors: Andrey B. Matsko, Sergey P. Vyatchanin

Abstract: We found that the measurement sensitivity of an optical integrating gyroscope is fundamentally limited due to ponderomotive action of the light leading to the standard quantum limit of the rotation angle detection. The uncorrelated quantum fluctuations of power of clockwise and counterclockwise electromagnetic waves result in optical power-dependent uncertainty of the angular gyroscope position. W… ▽ More We found that the measurement sensitivity of an optical integrating gyroscope is fundamentally limited due to ponderomotive action of the light leading to the standard quantum limit of the rotation angle detection. The uncorrelated quantum fluctuations of power of clockwise and counterclockwise electromagnetic waves result in optical power-dependent uncertainty of the angular gyroscope position. We also show that, on the other hand, a quantum back action evading measurement of angular momentum of a gyroscope becomes feasible if proper measurement strategy is selected. The angle is perturbed in this case. This observation hints on fundamental inequivalency of integrating and rate gyroscopes. △ Less

Submitted 19 June, 2018; originally announced June 2018.

Comments: 9 pages

Electromagnetic Continuum Induced Nonlinearity

Authors: Andrey B. Matsko, Sergey P. Vyatchanin

Abstract: A nonrelativistic Hamiltonian describing interaction between a mechanical degree of freedom and radiation pressure is commonly used as an ultimate tool for studying system behavior in opto-mechanics. This Hamiltonian is derived from the equation of motion of a mechanical degree of freedom and the optical wave equation with time-varying boundary conditions. We show that this approach is deficient f… ▽ More A nonrelativistic Hamiltonian describing interaction between a mechanical degree of freedom and radiation pressure is commonly used as an ultimate tool for studying system behavior in opto-mechanics. This Hamiltonian is derived from the equation of motion of a mechanical degree of freedom and the optical wave equation with time-varying boundary conditions. We show that this approach is deficient for studying higher order nonlinear effects in an open resonant opto-mechanical system. Opto-mechanical interaction induces a large mechanical nonlinearity resulting from a strong dependence of the power of the light confined in the optical cavity on the mechanical degrees of freedom of the cavity due to coupling with electromagnetic continuum. This dissipative nonlinearity cannot be inferred from the standard Hamiltonian formalism. △ Less

Submitted 22 April, 2018; originally announced April 2018.

Comments: 5 pages, 1 figure

Journal ref: Phys. Rev. A 97, 053824 (2018)

On fundamental diffraction limitation of finesse of a Fabry-Perot cavity

Authors: Mikhail V. Poplavskiy, Andrey B. Matsko, Hiroaki Yamamoto, Sergey P. Vyatchanin

Abstract: We perform a theoretical study of finesse limitations of a Fabry-Perot (FP) cavity occurring due to finite size, asymmetry, as well as imperfections of the cavity mirrors. A method of numerical simulations of the eigenvalue problem applicable for both the fundamental and high order cavity modes is suggested. Using this technique we find spatial profile of the modes and their round-trip diffraction… ▽ More We perform a theoretical study of finesse limitations of a Fabry-Perot (FP) cavity occurring due to finite size, asymmetry, as well as imperfections of the cavity mirrors. A method of numerical simulations of the eigenvalue problem applicable for both the fundamental and high order cavity modes is suggested. Using this technique we find spatial profile of the modes and their round-trip diffraction loss. The results of the numerical simulations and analytical calculations are nearly identical when we consider a conventional FP cavity. The proposed numerical technique has much broader applicability range and is valid for any FP cavity with arbitrary non-spherical mirrors which have cylindrical symmetry but disturbed in an asymmetric way, for example, by tilt or roughness of their mirrors. △ Less

Submitted 21 December, 2017; originally announced December 2017.

Comments: 15 pages, 10 figures

On sensitivity limitations of a dichromatic optical detection of a classical mechanical force

Authors: Sergey P. Vyatchanin, Andrey B. Matsko

Abstract: We apply the strategy of the back action evading measurement of a quadrature component of mechanical motion of a test mass to detection of a classical force acting on the mass (Science, 209, (1980) 547) and study both classical and quantum limitations of the technique. We are considering a resonant displacement transducer interrogated with a dichromatic optical pump as a model system in this study… ▽ More We apply the strategy of the back action evading measurement of a quadrature component of mechanical motion of a test mass to detection of a classical force acting on the mass (Science, 209, (1980) 547) and study both classical and quantum limitations of the technique. We are considering a resonant displacement transducer interrogated with a dichromatic optical pump as a model system in this study. The transducer is represented by a Fabry Perot cavity with a totally reflecting movable end mirror the resonant force of interest acts upon. The cavity is pumped with two coherent optical carriers equally detuned from one of the cavity resonances. We show that the quantum back action cannot be completely excluded from the measurement result due to the dynamic instability of the opto-mechanical system that either limits the allowable power of the optical pump or calls for introducing an asymmetry to the pump configuration destroying the quantum nondemolition nature of the measurement. △ Less

Submitted 21 December, 2017; originally announced December 2017.

Comments: 8 pages, 1 figure

Orthogonally Polarized Kerr Frequency Combs

Authors: Chang**g Bao, Peicheng Liao, Arne Kordts, Lin Zhang, Andrey Matsko, Maxim Karpov, Martin H. P. Pfeiffer, Guodong Xie, Yinwen Cao, Yan Yan, Ahmed Almaiman, Zhe Zhao, Amirhossein Mohajerin-Ariaei, Ahmad Fallahpour, Fatemeh Alishahi, Moshe Tur, Lute Maleki, Tobias J. Kippenberg, Alan E. Willner

Abstract: Kerr optical frequency combs with multi-gigahertz spacing have previously been demonstrated in chip-scale microresonators, with potential applications in coherent communication, spectroscopy, arbitrary waveform generation, and radio frequency photonic oscillators. In general, the harmonics of a frequency comb are identically polarized in a single microresonator. In this work, we report that one co… ▽ More Kerr optical frequency combs with multi-gigahertz spacing have previously been demonstrated in chip-scale microresonators, with potential applications in coherent communication, spectroscopy, arbitrary waveform generation, and radio frequency photonic oscillators. In general, the harmonics of a frequency comb are identically polarized in a single microresonator. In this work, we report that one comb in one polarization is generated by an orthogonally polarized soliton comb and two low-noise, orthogonally polarized combs interact with each other and exist simultaneously in a single microresonator. The second comb generation is attributed to the strong cross-phase modulation with the orthogonally polarized soliton comb and the high peak power of the intracavity soliton pulse. Experimental results show that a second frequency comb is excited even when a continuous wave light as a "seed"-with power as low as 0.1 mW-is input, while its own power level is below the threshold of comb generation. Moreover, the second comb has a concave envelope, which is different from the sech2 envelope of the soliton comb. This is due to the frequency mismatch between the harmonics and the resonant frequency. We also find that the repetition rates of these two combs coincide, although two orthogonal resonant modes are characterized by different free spectral ranges. △ Less

Submitted 21 June, 2017; v1 submitted 14 May, 2017; originally announced May 2017.

Optical Lattice Trap for Kerr Solitons

Authors: Hossein Taheri, Andrey B. Matsko, Lute Maleki

Abstract: We show theoretically and numerically that dichromatic pum** of a nonlinear microresonator by two continuous wave coherent optical pumps creates an optical lattice trap that results in the localization of intra-cavity Kerr solitons with soliton positions defined by the beat frequency of the pumps. This phenomenon corresponds to the stabilization of the Kerr frequency comb repetition rate. The lo… ▽ More We show theoretically and numerically that dichromatic pum** of a nonlinear microresonator by two continuous wave coherent optical pumps creates an optical lattice trap that results in the localization of intra-cavity Kerr solitons with soliton positions defined by the beat frequency of the pumps. This phenomenon corresponds to the stabilization of the Kerr frequency comb repetition rate. The locking of the second pump, through adiabatic tuning of its frequency, to the comb generated by the first pump allows transitioning to single-soliton states, manipulating the position of Kerr solitons in the cavity, and tuning the frequency comb repetition rate within the locking range. It also explains soliton crystal formation in resonators supporting a dispersive wave emitted as a result of higher-order group velocity dispersion or avoided mode crossing. We show that dichromatic pum** by externally stabilized pumps can be utilized for stabilization of microresonator-based optical frequency combs when the comb span does not cover an octave or a significant fraction thereof and standard self-referencing techniques cannot be employed. Our findings have significant ramifications for high-precision applications of optical frequency combs in spectrally pure signal generation, metrology, and timekee**. △ Less

Submitted 31 March, 2017; originally announced April 2017.

Comments: 13 pages, 12 figures

Microresonator-stabilized extended cavity diode laser for supercavity frequency stabilization

Authors: **kang Lim, Anatoliy A. Savchenkov, Andrey B. Matsko, Shu-Wei Huang, Lute Maleki, Chee Wei Wong

Abstract: We demonstrate a simple, compact, and cost-effective laser noise reduction method for stabilizing an extended cavity diode laser to a 3x105 finesse mirror Fabry-Pérot (F-P) cavity corresponding to resonance linewidth of 10 kHz using a crystalline MgF2 whispering gallery mode microresonator (WGMR). The laser linewidth is reduced to sub-kHz such that a stable Pound-Drever-Hall (PDH) error signal is… ▽ More We demonstrate a simple, compact, and cost-effective laser noise reduction method for stabilizing an extended cavity diode laser to a 3x105 finesse mirror Fabry-Pérot (F-P) cavity corresponding to resonance linewidth of 10 kHz using a crystalline MgF2 whispering gallery mode microresonator (WGMR). The laser linewidth is reduced to sub-kHz such that a stable Pound-Drever-Hall (PDH) error signal is built up. The wavelength of the pre-stabilized laser is tunable within a large bandwidth covering the high reflection mirror coating of a F-P supercavity. △ Less

Submitted 3 March, 2017; originally announced March 2017.

Chasing the thermodynamical noise limit in whispering-gallery-mode resonators for ultrastable laser frequency stabilization

Authors: **kang Lim, Anatoliy A. Savchenkov, Elijah Dale, Wei Liang, Danny Eliyahu, Vladimir Ilchenko, Andrey B. Matsko, Lute Maleki, Chee Wei Wong

Abstract: Ultrastable high-spectral-purity lasers have served as the cornerstone behind optical atomic clocks, quantum measurements, precision optical-microwave generation, high resolution optical spectroscopy and sensing. Hertz-level lasers stabilized to high finesse Fabry-Pérot mirror cavities are typically used for these studies but are large and fragile such that they have remained laboratory instrument… ▽ More Ultrastable high-spectral-purity lasers have served as the cornerstone behind optical atomic clocks, quantum measurements, precision optical-microwave generation, high resolution optical spectroscopy and sensing. Hertz-level lasers stabilized to high finesse Fabry-Pérot mirror cavities are typically used for these studies but are large and fragile such that they have remained laboratory instruments. There is a clear demand in rugged miniaturized lasers operating potentially at comparable stabilities to those bulk lasers. Over the past decade, ultrahigh-Q optical whispering-gallery-mode (WGM) resonators have served as a platform for low-noise microlasers but have not yet reached the ultimate stabilities defined by their fundamental noise. Here, we show the noise characteristics of WGM resonators and demonstrate a resonator-stabilized laser at the fundamental limit by compensating the intrinsic thermal expansion of a WGM resonator, allowing a sub-25 Hz linewidth and a 32 Hz Allan deviation on the 191 THz carrier in 100 ms integration. We also reveal the environmental sensitivities of the resonator at the thermodynamical noise limit and long-term frequency drifts governed by random-walk-noise statistics. △ Less

Submitted 18 January, 2017; originally announced January 2017.

High-contrast Kerr Frequency Combs

Authors: Ivan S. Grudinin, Vincent Huet, Nan Yu, Michael L. Gorodetsky, Andrey B. Matsko, Lute Maleki

Abstract: Kerr frequency combs with depressed harmonic at the optical pump frequency are theoretically explained and experimentally demonstrated. This result is achieved in a MgF$_2$ photonic belt resonator having reduced density of modes in its spectrum and configured with the add-drop optical couplers. ©2016 California Institute of Technology. Government sponsorship Kerr frequency combs with depressed harmonic at the optical pump frequency are theoretically explained and experimentally demonstrated. This result is achieved in a MgF$_2$ photonic belt resonator having reduced density of modes in its spectrum and configured with the add-drop optical couplers. ©2016 California Institute of Technology. Government sponsorship △ Less

Submitted 23 December, 2016; v1 submitted 2 December, 2016; originally announced December 2016.

Comments: 5 pages 4 figures

A stabilized chip-scale Kerr frequency comb via a high-Q reference photonic microresonator

Authors: **kang Lim, Shu-Wei Huang, Abhinav K. Vinod, Parastou Mortazavian, Mingbin Yu, Dim-Lee Kwong, Anatoliy A. Savchenkov, Andrey B. Matsko, Lute Maleki, Chee Wei Wong

Abstract: We stabilize a chip-scale Si3N4 phase-locked Kerr frequency comb via locking the pump laser to an independent stable high-Q reference microresonator and locking the comb spacing to an external microwave oscillator. In this comb, the pump laser shift induces negligible impact on the comb spacing change. This scheme is a step towards miniaturization of the stabilized Kerr comb system as the microres… ▽ More We stabilize a chip-scale Si3N4 phase-locked Kerr frequency comb via locking the pump laser to an independent stable high-Q reference microresonator and locking the comb spacing to an external microwave oscillator. In this comb, the pump laser shift induces negligible impact on the comb spacing change. This scheme is a step towards miniaturization of the stabilized Kerr comb system as the microresonator reference can potentially be integrated on-chip. Fractional instability of the optical harmonics of the stabilized comb is limited by the microwave oscillator used for comb spacing lock below 1 s averaging time and coincides with the pump laser drift in the long term. △ Less

Submitted 20 July, 2016; originally announced July 2016.

Comments: 4 pages,5 figures

Nonlinear and Quantum Optics with Whispering Gallery Resonators

Authors: Dmitry V. Strekalov, Christoph Marquardt, Andrey B. Matsko, Harald G. L. Schwefel, Gerd Leuchs

Abstract: Optical Whispering Gallery Modes (WGMs) derive their name from a famous acoustic phenomenon of guiding a wave by a curved boundary observed nearly a century ago. This phenomenon has a rather general nature, equally applicable to sound and all other waves. It enables resonators of unique properties attractive both in science and engineering. Very high quality factors of optical WGM resonators persi… ▽ More Optical Whispering Gallery Modes (WGMs) derive their name from a famous acoustic phenomenon of guiding a wave by a curved boundary observed nearly a century ago. This phenomenon has a rather general nature, equally applicable to sound and all other waves. It enables resonators of unique properties attractive both in science and engineering. Very high quality factors of optical WGM resonators persisting in a wide wavelength range spanning from radio frequencies to ultraviolet light, their small mode volume, and tunable in- and out- coupling make them exceptionally efficient for nonlinear optical applications. Nonlinear optics facilitates interaction of photons with each other and with other physical systems, and is of prime importance in quantum optics. In this paper we review numerous applications of WGM resonators in nonlinear and quantum optics. We outline the current areas of interest, summarize progress, highlight difficulties, and discuss possible future development trends in these areas. △ Less

Submitted 31 July, 2016; v1 submitted 25 May, 2016; originally announced May 2016.

Comments: This is a review paper with 615 references, submitted to J. Opt

Journal ref: Journal of Optics, 18, 123002 (2016)

Optical Gravitational Wave Antenna with Increased Power Handling Capability

Authors: Andrey B. Matsko, Mikhail V. Poplavskiy, Hiroaki Yamamoto, Sergey P. Vyatchanin

Abstract: Fundamental sensitivity of an optical interferometric gravitational wave detector increases with increase of the optical power which, in turn, limited because of the opto-mechanical parametric instabilities of the interferometer. We propose to optimize geometrical shape of the mirrors of the detector to reduce the diffraction-limited finesse of unessential optical modes of the interferometer resul… ▽ More Fundamental sensitivity of an optical interferometric gravitational wave detector increases with increase of the optical power which, in turn, limited because of the opto-mechanical parametric instabilities of the interferometer. We propose to optimize geometrical shape of the mirrors of the detector to reduce the diffraction-limited finesse of unessential optical modes of the interferometer resulting in increase of the threshold of the opto-mechanical instabilities and subsequent increase of the measurement sensitivity. Utilizing parameters of the LIGO interferometer we found that the proposed technique allows constructing a Fabry-Perot interferometer with round trip diffraction loss of the fundamental mode not exceeding $5$~ppm, whereas the loss of the first dipole as well as the other high order modes exceed $1,000$~ppm and $8,000$~ppm, respectively. The optimization comes at the price of tighter tolerances on the mirror tilt stability, but does not result in a significant modification of the optical beam profile and does not require changes in the the gravity detector read-out system. The cavity with proposed mirrors is also stable with respect to the slight modification of the mirror shape. △ Less

Submitted 18 December, 2015; originally announced December 2015.

Comments: 5 pages, 4 figures

MSC Class: 14J60 ACM Class: F.2.2

Journal ref: Phys. Rev. D 93, 083010 (2016)

Enabling Arbitrary Wavelength Optical Frequency Combs on Chip

Authors: Mohammad Soltani, Andrey B. Matsko, Lute Maleki

Abstract: A necessary condition for generation of bright soliton Kerr frequency combs in microresonators is to achieve anomalous group velocity dispersion (GVD) for the resonator modes. This condition is hard to implement in visible as well as ultraviolet since the majority of optical materials are characterized with large normal GVD in these wavelength regions. We overcome this challenge by borrowing ideas… ▽ More A necessary condition for generation of bright soliton Kerr frequency combs in microresonators is to achieve anomalous group velocity dispersion (GVD) for the resonator modes. This condition is hard to implement in visible as well as ultraviolet since the majority of optical materials are characterized with large normal GVD in these wavelength regions. We overcome this challenge by borrowing ideas from strongly dispersive coupled systems in solid state physics and optics. We show that photonic compound ring resonators can possess large anomalous GVD at any desirable wavelength, even if each individual resonator is characterized with normal GVD. Based on this concept we design a mode locked frequency comb with thin-film silicon nitride compound ring resonators in the vicinity of Rubidium D1 line (794.6nm) and propose to use this optical comb as a flywheel for chip-scale optical clocks. △ Less

Submitted 25 September, 2015; originally announced September 2015.

Comments: 6 pages, 3 figures

Generation of Kerr combs centered at 4.5μm in crystalline microresonators pumped by quantum cascade lasers

Authors: Anatoliy A. Savchenkov, Vladimir. S. Ilchenko, Fabio Di Teodoro, Paul M. Belden, William T. Lotshaw, Andrey B. Matsko, Lute Maleki

Abstract: We report on the generation of mid-infrared Kerr frequency combs in high-finesse CaF$_2$ and MgF$_2$ whispering-gallery mode resonators pumped with continuous wave room temperature quantum cascade lasers. The combs were centered at 4.5$μ$m, the longest wavelength to date. A frequency comb wider than a half of an octave was demonstrated when approximately 20mW of pump power was coupled to an MgF2 r… ▽ More We report on the generation of mid-infrared Kerr frequency combs in high-finesse CaF$_2$ and MgF$_2$ whispering-gallery mode resonators pumped with continuous wave room temperature quantum cascade lasers. The combs were centered at 4.5$μ$m, the longest wavelength to date. A frequency comb wider than a half of an octave was demonstrated when approximately 20mW of pump power was coupled to an MgF2 resonator characterized with quality factor exceeding 10$^8$. △ Less

Submitted 31 May, 2015; originally announced June 2015.

Comments: 5 pages, 5 figures

Compact Stabilized Semiconductor Laser for Frequency Metrology

Authors: W. Liang, V. S. Ilchenko, D. Eliyahu, E. Dale, A. A. Savchenkov, D. Seidel, A. B. Matsko, L. Maleki

Abstract: We report on the development of a frequency modulatable 795 nm semiconductor laser based on self-injection locking to a high quality factor whispering gallery mode microresonator. The laser is characterized with residual amplitude modulation below -80 dB and frequency noise better than 300 Hz/Hz^(1/2) at offset frequencies ranging from 100 Hz to 10 MHz. The frequency modulation (FM) speed and span… ▽ More We report on the development of a frequency modulatable 795 nm semiconductor laser based on self-injection locking to a high quality factor whispering gallery mode microresonator. The laser is characterized with residual amplitude modulation below -80 dB and frequency noise better than 300 Hz/Hz^(1/2) at offset frequencies ranging from 100 Hz to 10 MHz. The frequency modulation (FM) speed and span of the laser exceed 1 MHz and 4 GHz, respectively. Locking of the laser to Doppler-free saturated absorption resonance of 87Rb D1 line is demonstrated and frequency stability below 10^(-12) is measured for integration time spanning from 1 s to 1 day. The architecture demonstrated in this study is suitable for realization of frequency modulatable lasers at any wavelength. △ Less

Submitted 17 November, 2014; originally announced November 2014.

Comments: 9 pages, 5 figures

Feshbach Resonances in Kerr Frequency Combs

Authors: Andrey B. Matsko, Lute Maleki

Abstract: We show that both the power and repetition rate of a frequency comb generated in a nonlinear ring resonator, pumped with continuous wave (cw) coherent light, are modulated. The modulation is brought about by the interaction of the cw background with optical pulses excited in the resonator, and occurs in resonators with nonzero high-order chromatic dispersion and wavelength-dependent quality factor… ▽ More We show that both the power and repetition rate of a frequency comb generated in a nonlinear ring resonator, pumped with continuous wave (cw) coherent light, are modulated. The modulation is brought about by the interaction of the cw background with optical pulses excited in the resonator, and occurs in resonators with nonzero high-order chromatic dispersion and wavelength-dependent quality factor. The modulation frequency corresponds to the detuning of the pump frequency from the eigenfrequency of the pumped mode in the resonator. △ Less

Submitted 30 October, 2014; originally announced October 2014.

Comments: 4 pages, 2 figures

Noise conversion in Kerr comb RF photonic oscillators

Authors: Andrey B. Matsko, Lute Maleki

Abstract: Transfer of amplitude and phase noise from a continuous wave optical pump to the repetition rate of a Kerr frequency comb is studied theoretically, with focus on generation of spectrally pure radio frequency (RF) signals via demodulation of the frequency comb on a fast photodiode. It is shown that both the high order chromatic dispersion of the resonator spectrum and frequency-dependent quality fa… ▽ More Transfer of amplitude and phase noise from a continuous wave optical pump to the repetition rate of a Kerr frequency comb is studied theoretically, with focus on generation of spectrally pure radio frequency (RF) signals via demodulation of the frequency comb on a fast photodiode. It is shown that both the high order chromatic dispersion of the resonator spectrum and frequency-dependent quality factor of the resonator modes facilitate the optical-to-RF noise conversion that limits spectral purity of the RF signal. △ Less

Submitted 30 October, 2014; originally announced October 2014.

Comments: 10 pages, 7 figures

Mode-locked ultrashort pulse generation from on-chip normal dispersion microresonators

Authors: S. -W. Huang, H. Zhou, J. Yang, J. F. McMillan, A. Matsko, M. Yu, D. -L. Kwong, L. Maleki, C. W. Wong

Abstract: We describe the generation of stable mode-locked pulse trains from on-chip normal dispersion microresonators. The excitation of hyper-parametric oscillation is facilitated by the local dispersion disruptions induced by mode interactions. The system is then driven from hyper-parametric oscillation to the mode-locked state with over 200 nm spectral width by controlled pump power and detuning. With t… ▽ More We describe the generation of stable mode-locked pulse trains from on-chip normal dispersion microresonators. The excitation of hyper-parametric oscillation is facilitated by the local dispersion disruptions induced by mode interactions. The system is then driven from hyper-parametric oscillation to the mode-locked state with over 200 nm spectral width by controlled pump power and detuning. With the continuous-wave driven nonlinearity, the pulses sit on a pedestal, akin to a cavity soliton. We identify the importance of pump detuning and wavelength-dependent quality factors in stabilizing and sha** the pulse structure, to achieve a single pulse inside the cavity. We examine the mode locking dynamics by numerically solving the master equation and provide analytic solutions under appropriate approximations. △ Less

Submitted 12 January, 2015; v1 submitted 11 April, 2014; originally announced April 2014.

Comments: 36 pages, 20 figures

Journal ref: Phys. Rev. Lett. 114, 053901 (2015)

Generation of a coherent near-infrared Kerr frequency comb in a monolithic microresonator with normal GVD

Authors: Wei Liang, Anatoliy A. Savchenkov, Vladimir S. Ilchenko, Danny Eliyahu, David Seidel, Andrey B. Matsko, Lute Maleki

Abstract: We demonstrate experimentally, and explain theoretically, generation of a wide, fundamentally phase locked Kerr frequency comb in a nonlinear resonator with a normal group velocity dispersion. A magnesium fluoride whispering gallery resonator characterized with 10 GHz free spectral range and pumped either at 780 nm or 795 nm is used in the experiment. The envelope of the observed frequency comb di… ▽ More We demonstrate experimentally, and explain theoretically, generation of a wide, fundamentally phase locked Kerr frequency comb in a nonlinear resonator with a normal group velocity dispersion. A magnesium fluoride whispering gallery resonator characterized with 10 GHz free spectral range and pumped either at 780 nm or 795 nm is used in the experiment. The envelope of the observed frequency comb differs significantly from the Kerr frequency comb spectra reported previously. We show via numerical simulation that, while the frequency comb does not correspond to generation of short optical pulses, the relative phases of the generated harmonics are fixed. △ Less

Submitted 8 April, 2014; originally announced April 2014.

Comments: 5 pages, 5 figures, to appear in Optics Letters

Crystalline Whispering Gallery Mode Resonators: In Search of The Optimal Material

Authors: V. S. Ilchenko, A. A. Savchenkov, A. B. Matsko, L. Maleki

Abstract: Different applications of crystalline whispering gallery mode resonators call for different properties of the resonator host material. We report on our recent study of resonators made out of sapphire, diamond, and quartz crystals and discuss possible applications of these resonators. In particular, we demonstrate Kerr frequency comb generation in sapphire microresonators. Different applications of crystalline whispering gallery mode resonators call for different properties of the resonator host material. We report on our recent study of resonators made out of sapphire, diamond, and quartz crystals and discuss possible applications of these resonators. In particular, we demonstrate Kerr frequency comb generation in sapphire microresonators. △ Less

Submitted 1 April, 2014; originally announced April 2014.

Comments: Proc. SPIE 8960, Laser Resonators, Microresonators, and Beam Control XVI, 896013 (March 4, 2014)

Spectrally Pure RF Photonic Source Based on a Resonant Optical Hyper-Parametric Oscillator

Authors: W. Liang, D. Eliyahu, A. B. Matsko, V. S. Ilchenko, D. Seidel, L. Maleki

Abstract: We demonstrate a free running 10GHz microresonator-based RF photonic hyper-parametric oscillator characterized with phase noise better than -60dBc/Hz at 10Hz, -90dBc/Hz at 100Hz, and -150dBc/Hz at 10MHz. The device consumes less than 25mW of optical power. A correlation between the frequency of the continuous wave laser pum** the nonlinear resonator and the generated RF frequency is confirmed. T… ▽ More We demonstrate a free running 10GHz microresonator-based RF photonic hyper-parametric oscillator characterized with phase noise better than -60dBc/Hz at 10Hz, -90dBc/Hz at 100Hz, and -150dBc/Hz at 10MHz. The device consumes less than 25mW of optical power. A correlation between the frequency of the continuous wave laser pum** the nonlinear resonator and the generated RF frequency is confirmed. The performance of the device is compared with the performance of a standard optical fiber based coupled opto-electronic oscillator of OEwaves. △ Less

Submitted 31 March, 2014; originally announced April 2014.

Comments: 9 pages, 8 figures. Wei Liang at al., Proceedings of SPIE Vol. 8960 (SPIE, Bellingham, WA 2014), 896010

On limitation of quality factor of single mode resonators with finite size

Authors: Fahmida Ferdous, Alena A. Demchenko, Sergey P. Vyatchanin, Andrey B. Matsko, Lute Maleki

Abstract: Using realistic numerical models we analyze radiative loss of bound and unbound modes of specially designed high-Q whispering gallery and Fabry-Perot cavities of similar size and shape, and find a set of parameters when they can be treated as single mode structures. We show that these cavities have similar properties in spite of their different loss mechanisms. The cavity morphology engineering do… ▽ More Using realistic numerical models we analyze radiative loss of bound and unbound modes of specially designed high-Q whispering gallery and Fabry-Perot cavities of similar size and shape, and find a set of parameters when they can be treated as single mode structures. We show that these cavities have similar properties in spite of their different loss mechanisms. The cavity morphology engineering does not lead to reduction of the resonator quality factor. △ Less

Submitted 26 March, 2014; originally announced March 2014.

Comments: 5 pages, 4 figures

On phase noise of self-injection locked semiconductor lasers

Authors: E. Dale, W. Liang, D. Eliyahu, A. A. Savchenkov, V. S. Ilchenko, A. B. Matsko, D. Seidel, L. Maleki

Abstract: We discuss our recent progress in iimproving the phase noise of a semiconductor laser using self-injection locking of to a mode of a high-Q whispering gallery mode resonator. Locking efficiency is analyzed for semiconductor distributed feedback (DFB) as well as Fabry-Perot (FP) lasers operating at 690nm, 1060nm, 1550nm, and 2000nm. Instantaneous linewidth below 300 Hz is realized with telecom DFB… ▽ More We discuss our recent progress in iimproving the phase noise of a semiconductor laser using self-injection locking of to a mode of a high-Q whispering gallery mode resonator. Locking efficiency is analyzed for semiconductor distributed feedback (DFB) as well as Fabry-Perot (FP) lasers operating at 690nm, 1060nm, 1550nm, and 2000nm. Instantaneous linewidth below 300 Hz is realized with telecom DFB lasers. Tunability of the lasers is demonstrated. Commercially available packaged "plug-and-play" devices are manufactured. △ Less

Submitted 25 March, 2014; originally announced March 2014.

Comments: 9 pages, 11 figures

Journal ref: Proc. SPIE 8960, Laser Resonators, Microresonators, and Beam Control XVI, 89600X (March 4, 2014)

Miniature Optical Atomic Clock: Stabilization of a Kerr Comb Oscillator

Authors: A. A. Savchenkov, D. Eliyahu, W. Liang, V. S. Ilchenko, J. Byrd, A. B. Matsko, D. Seidel, L. Maleki

Abstract: Mechanical clocks consist of a pendulum and a clockwork that translates the pendulum period to displayed time. The most advanced clocks utilize optical transitions in atoms in place of the pendulum and an optical frequency comb generated by a femtosecond laser as the clockwork. The comb must be stabilized at two points along its frequency spectrum: one with a laser to lock a comb line to a transit… ▽ More Mechanical clocks consist of a pendulum and a clockwork that translates the pendulum period to displayed time. The most advanced clocks utilize optical transitions in atoms in place of the pendulum and an optical frequency comb generated by a femtosecond laser as the clockwork. The comb must be stabilized at two points along its frequency spectrum: one with a laser to lock a comb line to a transition in the atom, and another through self referencing to stabilize the frequency interval between the comb lines. This approach requires advanced techniques, so optical atomic clocks are currently laboratory devices in specialized labs. In this paper we leverage unique properties of Kerr comb oscillators for realization of optical atomic clocks in miniature form factors. In particular, we describe a clock based on D1 transition of 87Rb that fits in the palm of the hand, and can be further miniaturized to chip scale. △ Less

Submitted 14 January, 2013; originally announced January 2013.

Comments: 4 pages, 4 figures

Chaotic dynamics of frequency combs generated with continuously pumped nonlinear microresonators

Authors: Andrey B. Matsko, Wei Liang, Anatoliy A. Savchenkov, Lute Maleki

Abstract: We theoretically and experimentally investigate the chaotic regime of optical frequency combs generated in nonlinear ring microresonators pumped with continuous wave light. We show that the chaotic regime reveals itself, in an apparently counter-intuitive way, by a flat top symmetric envelope of the frequency spectrum, when observed by means of an optical spectrum analyzer. The comb demodulated on… ▽ More We theoretically and experimentally investigate the chaotic regime of optical frequency combs generated in nonlinear ring microresonators pumped with continuous wave light. We show that the chaotic regime reveals itself, in an apparently counter-intuitive way, by a flat top symmetric envelope of the frequency spectrum, when observed by means of an optical spectrum analyzer. The comb demodulated on a fast photodiode produces a noisy radio frequency signal with an spectral width significantly exceeding the linear bandwidth of the microresonator mode. △ Less

Submitted 19 November, 2012; originally announced November 2012.

Comments: 4 pages, 4 figures

Stability of Resonant Opto-Mechanical Oscillators

Authors: A. B. Matsko, A. A. Savchenkov, L. Maleki

Abstract: We theoretically study the frequency stability of an opto-mechanical radio frequency oscillator based on resonant interaction of two optical and one mechanical modes of the same optical microcavity. A generalized expression for the phase noise of the oscillator is derived using Langevin formalism and compared to the phase noise of existing electronic oscillators. We theoretically study the frequency stability of an opto-mechanical radio frequency oscillator based on resonant interaction of two optical and one mechanical modes of the same optical microcavity. A generalized expression for the phase noise of the oscillator is derived using Langevin formalism and compared to the phase noise of existing electronic oscillators. △ Less

Submitted 12 March, 2012; originally announced March 2012.

Comments: 6 pages, 1 figure

Optical Kerr Frequency Comb Generation in Overmoded Resonators

Authors: A. B. Matsko, A. A. Savchenkov, W. Liang, V. S. Ilchenko, D. Seidel, L. Maleki

Abstract: We show that scattering-based interaction among nearly degenerate optical modes is the key factor in low threshold generation of Kerr frequency combs in nonlinear optical resonators possessing small group velocity dispersion (GVD). The mode interaction is capable of producing drastic change in the local GVD, resulting in either a significant reduction or increase of the oscillation threshold. It i… ▽ More We show that scattering-based interaction among nearly degenerate optical modes is the key factor in low threshold generation of Kerr frequency combs in nonlinear optical resonators possessing small group velocity dispersion (GVD). The mode interaction is capable of producing drastic change in the local GVD, resulting in either a significant reduction or increase of the oscillation threshold. It is also responsible for the majority of observed combs in resonators characterized with large normal GVD. We present results of our numerical simulations as well as supporting experimental data. △ Less

Submitted 9 January, 2012; originally announced January 2012.

Transient Regime of Kerr Frequency Comb Formation

Authors: Anatoliy A. Savchenkov, Andrey B. Matsko, Wei Liang, Vladimir S. Ilchenko, David Seidel, Lute Maleki

Abstract: Temporal growth of an optical Kerr frequency comb generated in a microresonator is studied both experimentally and numerically. We find that the comb emerges from vacuum fluctuations of the electromagnetic field on timescales significantly exceeding the ringdown time of the resonator modes. The frequency harmonics of the comb spread starting from the optically pumped mode if the microresonator is… ▽ More Temporal growth of an optical Kerr frequency comb generated in a microresonator is studied both experimentally and numerically. We find that the comb emerges from vacuum fluctuations of the electromagnetic field on timescales significantly exceeding the ringdown time of the resonator modes. The frequency harmonics of the comb spread starting from the optically pumped mode if the microresonator is characterized with anomalous group velocity dispersion. The harmonics have different growth rates resulting from sequential four-wave mixing process that explains intrinsic modelocking of the comb. △ Less

Submitted 16 November, 2011; originally announced November 2011.

Comments: 4 pages, 5 figures

Hard and Soft Excitation Regimes of Kerr Frequency Combs

Authors: Andrey B. Matsko, Anatoliy A. Savchenkov, Vladimir S. Ilchenko, David Seidel, Lute Maleki

Abstract: We theoretically study the stability conditions and excitation regimes of hyper-parametric oscillation and Kerr frequency comb generation in continuously pumped nonlinear optical resonators possessing anomalous group velocity dispersion. We show that both hard and soft excitation regimes are possible in the resonators. Selection between the regimes is achieved via change in the parameters of the p… ▽ More We theoretically study the stability conditions and excitation regimes of hyper-parametric oscillation and Kerr frequency comb generation in continuously pumped nonlinear optical resonators possessing anomalous group velocity dispersion. We show that both hard and soft excitation regimes are possible in the resonators. Selection between the regimes is achieved via change in the parameters of the pum** light. △ Less

Submitted 16 November, 2011; originally announced November 2011.

Comments: 4 pages, 7 figures

Generation of Kerr Frequency Combs in Resonators with Normal GVD

Authors: Andrey B. Matsko, Anatoliy A. Savchenkov, Lute Maleki

Abstract: We show via numerical simulation that Kerr frequency combs can be generated in a nonlinear resonator characterized with normal group velocity dispersion (GVD). We find the spectral shape of the comb and temporal envelope of the corresponding optical pulses formed in the resonator. We show via numerical simulation that Kerr frequency combs can be generated in a nonlinear resonator characterized with normal group velocity dispersion (GVD). We find the spectral shape of the comb and temporal envelope of the corresponding optical pulses formed in the resonator. △ Less

Submitted 16 November, 2011; originally announced November 2011.

Comments: 3 pages, 4 figures, to appear in Optics Letters

RF-Photonic Frequency Stability Gear Box

Authors: Andrey B. Matsko, Anatoliy A. Savchenkov, Vladimir S. Ilchenko, David Seidel, Lute Maleki

Abstract: An optical technique based on stability transfer among modes of a monolithic optical microresonator is proposed for long therm frequency stabilization of a radiofrequency (RF) oscillator. We show that locking two resonator modes, characterized with dissimilar sensitivity in responding to an applied forcing function, to a master RF oscillator allows enhancing the long term stability of a slave RF o… ▽ More An optical technique based on stability transfer among modes of a monolithic optical microresonator is proposed for long therm frequency stabilization of a radiofrequency (RF) oscillator. We show that locking two resonator modes, characterized with dissimilar sensitivity in responding to an applied forcing function, to a master RF oscillator allows enhancing the long term stability of a slave RF oscillator locked to two resonator modes having nearly identical sensitivity. For instance, the stability of a 10 MHz master oscillator characterized with Allan deviation of 10^-7 at 10^4s can be increased and transferred to a slave oscillator with identical stability performance, so that the resultant Allan deviation of the slave oscillator becomes equal to 10-13 at 10^4s. The method does not require absolute frequency references to achieve such a performance. △ Less

Submitted 16 November, 2011; originally announced November 2011.

Comments: 3 pages, 1 figure, to appear in Optics Letters