Showing 1–8 of 8 results for author: Mass, T W W

Electrically Tunable Reflective Metasurfaces with Continuous and Full Phase Modulation for High-efficiency Wavefront Control at Visible Frequencies

Authors: Parikshit Moitra, Xuewu Xu, Rasna Maruthiyodan Veetil, Xinan Liang, Tobias W. W. Mass, Arseniy I. Kuznetsov, Ramon Paniagua-Dominguez

Abstract: All-dielectric optical metasurfaces can locally control the amplitude and phase of light at the nanoscale, enabling arbitrary wavefront sha**. However, lack of post-fabrication tunability has limited the true potential of metasurfaces for many applications. Here, we utilize a thin liquid crystal (LC) layer as a tunable medium surrounding the metasurface to achieve a phase-only spatial light modu… ▽ More All-dielectric optical metasurfaces can locally control the amplitude and phase of light at the nanoscale, enabling arbitrary wavefront sha**. However, lack of post-fabrication tunability has limited the true potential of metasurfaces for many applications. Here, we utilize a thin liquid crystal (LC) layer as a tunable medium surrounding the metasurface to achieve a phase-only spatial light modulator (SLM) with high reflection in the visible frequency, exhibiting an active and continuous resonance tuning with associated 2pi phase control and uncoupled amplitude. Dynamic wavefront sha** is demonstrated by programming 96 individually addressable electrodes with a small pixel pitch of ~1 um. The small pixel size is facilitated by the reduced LC thickness, strongly suppressing crosstalk among pixels. This device is used to demonstrate dynamic beam steering with wide field-of-view and high absolute diffraction efficiencies. We believe that our demonstration may pave the way towards realizing next generation, high-resolution SLMs, with wide applications in dynamic holography, tunable optics and light detection and ranging (LiDAR), to mention a few. △ Less

Submitted 24 March, 2023; originally announced March 2023.

Tunable wavefront control in the visible spectrum using low-loss chalcogenide phase change metasurfaces

Authors: Parikshit Moitra, Yunzheng Wang, Xinan Liang, Li Lu, Alyssa Poh, Tobias W. W. Mass, Robert E. Simpson, Arseniy I. Kuznetsov, Ramon Paniagua-Dominguez

Abstract: All-dielectric metasurfaces provide unique solutions for advanced wavefront manipulation of light with complete control of amplitude and phase at sub-wavelength scales. One limitation, however, for most of these devices is the lack of any post-fabrication tunability of their response. To break this limit, a promising approach is employing phase-change-materials (PCM), which provide a fast, low ene… ▽ More All-dielectric metasurfaces provide unique solutions for advanced wavefront manipulation of light with complete control of amplitude and phase at sub-wavelength scales. One limitation, however, for most of these devices is the lack of any post-fabrication tunability of their response. To break this limit, a promising approach is employing phase-change-materials (PCM), which provide a fast, low energy and non-volatile means to endow metasurfaces with a switching mechanism. In this regard, great advancements have been done in the mid infrared and near infrared spectrum using different chalcogenides. In the visible spectral range, however, very few devices have demonstrated full phase manipulation, high efficiencies, and reversible switching. Here, we experimentally demonstrate a tunable all-dielectric Huygens metasurface made of antimony sulfide (Sb2S3) PCM, a low loss and high-index material in the visible spectral range with a large contrast (nearly 0.5) between its amorphous and crystalline states. We show close to 2pi phase modulation with high associated transmittance and use it to create switchable beam steering and holographic display devices. These novel chalcogenide PCM metasurfaces have the potential to emerge as a platform for next generation spatial light modulators and to impact application areas such as tunable and adaptive flat optics, LiDAR, and many more. △ Less

Submitted 15 June, 2022; originally announced June 2022.

High resolution multispectral spatial light modulators based on tunable Fabry-Perot nanocavities

Authors: Shampy Mansha, Parikshit Moitra, Xuewu Xu, Tobias W. W. Mass, Rasna Maruthiyodan Veetil, Xinan Liang, Shi-Qiang Li, Ramon Paniagua-Dominguez, Arseniy I. Kuznetsov

Abstract: Spatial light modulators (SLMs) are the most relevant technology for dynamic wavefront manipulation. They find diverse applications ranging from novel displays to optical and quantum communications. Among commercial SLMs for phase modulation, Liquid Crystal on Silicon (LCoS) offers the smallest pixel size and, thus, the most precise phase map** and largest field of view (FOV). Further pixel mini… ▽ More Spatial light modulators (SLMs) are the most relevant technology for dynamic wavefront manipulation. They find diverse applications ranging from novel displays to optical and quantum communications. Among commercial SLMs for phase modulation, Liquid Crystal on Silicon (LCoS) offers the smallest pixel size and, thus, the most precise phase map** and largest field of view (FOV). Further pixel miniaturization, however, is not possible in these devices due to inter-pixel cross-talks, which follow from the high driving voltages needed to modulate the thick liquid crystal (LC) cells that are necessary for full phase control. Newly introduced metasurface-based SLMs provide means for pixel miniaturization by modulating the phase via resonance tuning. These devices, however, are intrinsically monochromatic, limiting their use in applications requiring multi-wavelength operation. Here, we introduce a novel design allowing small pixel and multi-spectral operation. Based on LC-tunable Fabry-Perot nanocavities engineered to support multiple resonances across the visible range (including red, green and blue wavelengths), our design provides continuous 2pi phase modulation with high reflectance at each of the operating wavelengths. Experimentally, we realize a device with 96 pixels (~1μm pitch) that can be individually addressed by electrical biases. Using it, we first demonstrate multi-spectral programmable beam steering with FOV~18 degrees and absolute efficiencies exceeding 40%. Then, we reprogram the device to achieve multi-spectral lensing with tunable focal distance and efficiencies ~27%. Our design paves the way towards a new class of SLM for future applications in displays, optical computing and beyond. △ Less

Submitted 28 September, 2021; originally announced September 2021.

Comments: 43 pages, 15 figures

80-degree field-of-view transmissive metasurface-based spatial light modulator

Authors: Anton V. Baranikov, Shi-Qiang Li, Damien Eschimese, Xuewu Xu, Simon Thiele, Simon Ristok, Rasna Maruthiyodan Veetil, Tobias W. W. Mass, Parikshit Moitra, Harald Giessen, Ramon Paniagua-Dominguez, Arseniy I. Kuznetsov

Abstract: Compact, lightweight and high-performance spatial light modulators (SLMs) are crucial for modern optical technologies. The drive for pixel miniaturization, necessary to improve their performance, has led to a promising alternative, active optical metasurfaces, which enable tunable subwavelength wavefront manipulation. Here, we demonstrate an all-solid-state programmable transmissive SLM device bas… ▽ More Compact, lightweight and high-performance spatial light modulators (SLMs) are crucial for modern optical technologies. The drive for pixel miniaturization, necessary to improve their performance, has led to a promising alternative, active optical metasurfaces, which enable tunable subwavelength wavefront manipulation. Here, we demonstrate an all-solid-state programmable transmissive SLM device based on Huygens dielectric metasurfaces. The metasurface features electrical tunability, provided by mature liquid crystals (LCs) technology. In contrast to conventional LC SLMs, our device enables high resolution with a pixel size of ~1 um. We demonstrate its performance by realizing programmable beam steering, which exhibits high side mode suppression ratio of ~6 dB. By complementing the device with a 3D printed doublet microlens, fabricated using two-photon polymerization, we enhance the field of view up to ~80 degrees. The developed prototype paves the way to compact, efficient and multifunctional devices for next generation augmented reality displays, light detection and ranging (LiDAR) systems and optical computing. △ Less

Submitted 23 July, 2021; originally announced July 2021.

Comments: 25 pages, 8 figures

Imaging properties of large field-of-view quadratic metalenses and their applications to fingerprint detection

Authors: Emmanuel Lassalle, Tobias W. W. Mass, Damien Eschimese, Anton V. Baranikov, Egor Khaidarov, Shiqiang Li, Ramon Paniagua-Dominguez, Arseniy I. Kuznetsov

Abstract: Dielectric metasurfaces, extremely thin nanostructured dielectric surfaces, hold promise to replace conventional refractive optics, such as lenses, due to their high performance and compactness. However, designing large field-of-view (FOV) metalenses, which are of particular importance when imaging relatively big objects at short distances, remains one of the most critical challenges. Recently, me… ▽ More Dielectric metasurfaces, extremely thin nanostructured dielectric surfaces, hold promise to replace conventional refractive optics, such as lenses, due to their high performance and compactness. However, designing large field-of-view (FOV) metalenses, which are of particular importance when imaging relatively big objects at short distances, remains one of the most critical challenges. Recently, metalenses implementing a quadratic phase profile have been put forward to solve this problem with a single element, but despite their theoretical ability to provide $180^\circ\,$FOV, imaging over very large FOV has not been demonstrated yet. In this work, we provide an in-depth analysis of the imaging properties of quadratic metalenses and, in particular, show that due to their intrinsic barrel distortion or fish-eye effect, there is a fundamental trade-off between the FOV achievable in a given imaging configuration and the optical resolution of the metalens and/or the detector resolution. To illustrate how to harness the full potential of quadratic metalenses, we apply these considerations to the fingerprint detection problem, and demonstrate experimentally the full imaging of a $5\,$mm fingerprint with features of the order of $100\,μ$m, with a metalens ten times smaller in size and located at a distance of only $2.5\,$mm away from the object. This constitutes the most compact system reported so far for the fingerprint detection. △ Less

Submitted 31 May, 2021; v1 submitted 16 February, 2021; originally announced February 2021.

Comments: 6 figures

Continuous wave second harmonic generation enabled by quasi-bound-states in the continuum on gallium phosphide metasurfaces

Authors: Aravind P. Anthur, Haizhong Zhang, Ramon Paniagua-Dominguez, Dmitry Kalashnikov, Son Tung Ha, Tobias Wilhelm Wolfgang Mass, Arseniy I. Kuznetsov, Leonid Krivitsky

Abstract: Resonant metasurfaces are an attractive platform for enhancing the non-linear optical processes, such as second harmonic generation (SHG), since they can generate very large local electromagnetic fields while relaxing the phase-matching requirements. Here, we take this platform a step closer to the practical applications by demonstrating visible range, continuous wave (CW) SHG. We do so by combini… ▽ More Resonant metasurfaces are an attractive platform for enhancing the non-linear optical processes, such as second harmonic generation (SHG), since they can generate very large local electromagnetic fields while relaxing the phase-matching requirements. Here, we take this platform a step closer to the practical applications by demonstrating visible range, continuous wave (CW) SHG. We do so by combining the attractive material properties of gallium phosphide with engineered, high quality-factor photonic modes enabled by bound states in the continuum. For the optimum case, we obtain efficiencies around 5e-5 % W$^{-1}$ when the system is pumped at 1200 nm wavelength with CW intensities of 1 kW/cm$^2$. Moreover, we measure external efficiencies as high as 0.1 % W$^{-1}$ with pump intensities of only 10 MW/cm$^2$ for pulsed irradiation. This efficiency is higher than the values previously reported for dielectric metasurfaces, but achieved here with pump intensities that are two orders of magnitude lower. △ Less

Submitted 3 February, 2021; originally announced February 2021.

Nonlinear interferometry with infrared metasurfaces

Authors: Anna V. Paterova, Dmitry A. Kalashnikov, Egor Khaidarov, Hongzhi Yang, Tobias W. W. Mass, Ramon Paniagua-Dominguez, Arseniy I. Kuznetsov, Leonid A. Krivitsky

Abstract: The optical elements comprised of sub-diffractive light scatterers, or metasurfaces, hold a promise to reduce the footprint and unfold new functionalities of optical devices. A particular interest is focused on metasurfaces for manipulation of phase and amplitude of light beams. Characterisation of metasurfaces can be performed using interferometry, which, however, may be cumbersome, specifically… ▽ More The optical elements comprised of sub-diffractive light scatterers, or metasurfaces, hold a promise to reduce the footprint and unfold new functionalities of optical devices. A particular interest is focused on metasurfaces for manipulation of phase and amplitude of light beams. Characterisation of metasurfaces can be performed using interferometry, which, however, may be cumbersome, specifically in the infrared (IR) range. Here, we realise a new method for characterising IR metasurfaces based on nonlinear interference, which uses accessible components for visible light. Correlated IR and visible photons are launched into a nonlinear interferometer so that the phase profile, imposed by the metasurface on the IR photons, modifies the interference at the visible photon wavelength. Furthermore, we show that this concept can be used for broadband manipulation of the intensity profile of a visible beam using a single IR metasurface. Our method unfolds the potential of quantum interferometry for the characterization of advanced optical elements. △ Less

Submitted 28 July, 2020; originally announced July 2020.

Comments: Submitted for publication

Probing hyperbolic polaritons using infrared attenuated total reflectance micro-spectroscopy

Authors: Thomas G. Folland, Tobias W. W. Maß, Joseph R. Matson, J. Ryan Nolen, Song Liu, Kenji Watanabe, Takashi Taniguchi, James H. Edgar, Thomas Taubner, Joshua D. Caldwell

Abstract: Hyperbolic polariton modes are highly appealing for a broad range of applications in nanophotonics, including surfaced enhanced sensing, sub-diffractional imaging and reconfigurable metasurfaces. Here we show that attenuated total reflectance micro-spectroscopy (ATR) using standard spectroscopic tools can launch hyperbolic polaritons in a Kretschmann-Raether configuration. We measure multiple hype… ▽ More Hyperbolic polariton modes are highly appealing for a broad range of applications in nanophotonics, including surfaced enhanced sensing, sub-diffractional imaging and reconfigurable metasurfaces. Here we show that attenuated total reflectance micro-spectroscopy (ATR) using standard spectroscopic tools can launch hyperbolic polaritons in a Kretschmann-Raether configuration. We measure multiple hyperbolic and dielectric modes within the naturally hyperbolic material hexagonal boron nitride as a function of different isotopic enrichments and flake thickness. This overcomes the technical challenges of measurement approaches based on nanostructuring, or scattering scanning nearfield optical microscopy. Ultimately, our ATR approach allows us to compare the optical properties of small-scale materials prepared by different techniques systematically △ Less

Submitted 1 October, 2018; originally announced October 2018.

Comments: 13 pages 4 figures