Showing 1–50 of 154 results for author: Mason, D

Speckle Interferometry at SOAR in 2023

Authors: Andrei Tokovinin, Brian D. Mason, Rene A. Mendez, Edgardo Costa

Abstract: Results of the speckle-interferometry observations at the 4.1 m Southern Astrophysical Research Telescope (SOAR) obtained during 2023 are presented: 1913 measurements of 1533 resolved pairs or subsystems (median separation 0.16") and non-resolutions of 552 targets; 42 pairs are resolved here for the first time. This work continues our long-term effort to monitor orbital motion in close binaries an… ▽ More Results of the speckle-interferometry observations at the 4.1 m Southern Astrophysical Research Telescope (SOAR) obtained during 2023 are presented: 1913 measurements of 1533 resolved pairs or subsystems (median separation 0.16") and non-resolutions of 552 targets; 42 pairs are resolved here for the first time. This work continues our long-term effort to monitor orbital motion in close binaries and hierarchical systems. A large number (147) of orbits have been determined for the first time or updated using these measurements. Complementarity of this program with the Gaia mission is highlighted. △ Less

Submitted 16 May, 2024; originally announced May 2024.

Comments: Accepted by The Astronomical Journal. 17 pages, 5 Figures, 6 Tables. The tables of measurements can be downloaded from https://www.ctio.noirbab.edu/~atokovin/papers/soardata-2024.tar.gz

Simulated TEM imaging of a heavily irradiated metal

Authors: D. R. Mason, M. Boleininger, J. Haley, E. Prestat, G. He, F. Hofmann, S. L. Dudarev

Abstract: We recast the Howie-Whelan equations for generating simulated transmission electron microscope (TEM) images, replacing the dependence on local atomic displacements with atomic positions only. This allows very rapid computation of simulated TEM images for arbitrarily complex atomistic configurations of lattice defects and dislocations in the dynamical two beam approximation. Large scale massively-o… ▽ More We recast the Howie-Whelan equations for generating simulated transmission electron microscope (TEM) images, replacing the dependence on local atomic displacements with atomic positions only. This allows very rapid computation of simulated TEM images for arbitrarily complex atomistic configurations of lattice defects and dislocations in the dynamical two beam approximation. Large scale massively-overlap** cascade simulations performed with molecular dynamics, are used to generate representative high-dose nanoscale irradiation damage in tungsten at room temperature, and we compare the simulated TEM images to experimental TEM images with similar irradiation and imaging conditions. The simulated TEM shows 'white-dot' damage in weak-beam dark-field imaging conditions, in line with our experimental observations and as expected from previous studies, and in bright-field conditions a dislocation network is observed. In this work we can also compare the images to the nanoscale lattice defects in the original atomic structures, and find that at high dose the white spots are not only created by small dislocation loops, but rather arise from nanoscale fluctuations in strains around curved sections of dislocation lines. △ Less

Submitted 26 January, 2024; originally announced January 2024.

Fast low-temperature irradiation creep driven by athermal defect dynamics

Authors: Alexander Feichtmayer, Max Boleininger, Johann Riesch, Daniel R. Mason, Luca Reali, Till Höschen, Maximilian Fuhr, Thomas Schwarz-Selinger, Rudolf Neu, Sergei L. Dudarev

Abstract: The occurrence of high stress concentrations in reactor components is a still intractable phenomenon encountered in fusion reactor design. We observe and quantitatively model a non-linear high-dose radiation mediated microstructure evolution effect that facilitates fast stress relaxation in the most challenging low-temperature limit. In situ observations of a tensioned tungsten wire exposed to a h… ▽ More The occurrence of high stress concentrations in reactor components is a still intractable phenomenon encountered in fusion reactor design. We observe and quantitatively model a non-linear high-dose radiation mediated microstructure evolution effect that facilitates fast stress relaxation in the most challenging low-temperature limit. In situ observations of a tensioned tungsten wire exposed to a high-energy ion beam show that internal stress of up to 2 GPa relaxes within minutes, with the extent and time-scale of relaxation accurately predicted by a parameter-free multiscale model informed by atomistic simulations. As opposed to conventional notions of radiation creep, the effect arises from the self-organisation of nanoscale crystal defects, athermally coalescing into extended polarized dislocation networks that compensate and alleviate the external stress. △ Less

Submitted 24 January, 2024; originally announced January 2024.

Comments: 10 pages, 5 figures

The U.S. CMS HL-LHC R&D Strategic Plan

Authors: Oliver Gutsche, Tulika Bose, Margaret Votava, David Mason, Andrew Melo, Mia Liu, Dirk Hufnagel, Lindsey Gray, Mike Hildreth, Burt Holzman, Kevin Lannon, Saba Sehrish, David Sperka, James Letts, Lothar Bauerdick, Kenneth Bloom

Abstract: The HL-LHC run is anticipated to start at the end of this decade and will pose a significant challenge for the scale of the HEP software and computing infrastructure. The mission of the U.S. CMS Software & Computing Operations Program is to develop and operate the software and computing resources necessary to process CMS data expeditiously and to enable U.S. physicists to fully participate in the… ▽ More The HL-LHC run is anticipated to start at the end of this decade and will pose a significant challenge for the scale of the HEP software and computing infrastructure. The mission of the U.S. CMS Software & Computing Operations Program is to develop and operate the software and computing resources necessary to process CMS data expeditiously and to enable U.S. physicists to fully participate in the physics of CMS. We have developed a strategic plan to prioritize R&D efforts to reach this goal for the HL-LHC. This plan includes four grand challenges: modernizing physics software and improving algorithms, building infrastructure for exabyte-scale datasets, transforming the scientific data analysis process and transitioning from R&D to operations. We are involved in a variety of R&D projects that fall within these grand challenges. In this talk, we will introduce our four grand challenges and outline the R&D program of the U.S. CMS Software & Computing Operations Program. △ Less

Submitted 4 December, 2023; v1 submitted 1 December, 2023; originally announced December 2023.

Comments: CHEP2023 proceedings, to be published in EPJ Web of Conferences

A Ceph S3 Object Data Store for HEP

Authors: Nick Smith, Bo Jayatilaka, David Mason, Oliver Gutsche, Alison Peisker, Robert Illingworth, Chris Jones

Abstract: We present a novel data format design that obviates the need for data tiers by storing individual event data products in column objects. The objects are stored and retrieved through Ceph S3 technology, with a layout designed to minimize metadata volume and maximize data processing parallelism. Performance benchmarks of data storage and retrieval are presented. We present a novel data format design that obviates the need for data tiers by storing individual event data products in column objects. The objects are stored and retrieved through Ceph S3 technology, with a layout designed to minimize metadata volume and maximize data processing parallelism. Performance benchmarks of data storage and retrieval are presented. △ Less

Submitted 27 November, 2023; originally announced November 2023.

Comments: CHEP2023 proceedings, to be published in EPJ Web of Conferences

Atomistic Study of Irradiation-Induced Plastic and Lattice Strain in Tungsten

Authors: **tong Wu, Daniel R. Mason, Fredric Granberg

Abstract: We demonstrate a practical way to perform decomposition of the elasto-plastic deformation directly from atomistic simulation snapshots. Through molecular dynamics simulations on a large single crystal, we elucidate the intricate process of converting plastic strain, atomic strain, and rigid rotation during irradiation. Our study highlights how prismatic dislocation loops act as initiators of plast… ▽ More We demonstrate a practical way to perform decomposition of the elasto-plastic deformation directly from atomistic simulation snapshots. Through molecular dynamics simulations on a large single crystal, we elucidate the intricate process of converting plastic strain, atomic strain, and rigid rotation during irradiation. Our study highlights how prismatic dislocation loops act as initiators of plastic strain effects in heavily irradiated metals, resulting in experimentally measurable alterations in lattice strain. We show the onset of plastic strain starts to emerge at high dose, leading to the spontaneous emergence of dislocation creep and irradiation-induced lattice swelling. This phenomenon arises from the agglomeration of dislocation loops into a dislocation network. Furthermore, our numerical framework enables us to categorize the plastic transformation into two distinct types: pure slip events and slip events accompanied by lattice swelling. The latter type is particularly responsible for the observed divergence in interstitial and vacancy counts, and also impacts the behavior of dislocations, potentially activating non-conventional slip systems. △ Less

Submitted 19 October, 2023; originally announced October 2023.

The deconfinement phase transition in $Sp(2N)$ gauge theories and the density of states method

Authors: David Mason, Biagio Lucini, Maurizio Piai, Enrico Rinaldi, Davide Vadacchino

Abstract: First-order phase transitions in the early universe might produce a detectable background of gravitational waves. As these phase transitions can be generated by new physics, it is important to quantify these effects. Many pure Yang-Mills gauge theories are known to undergo first-order deconfinement phase transitions, with properties that can be studied with lattice simulations. Despite the recent… ▽ More First-order phase transitions in the early universe might produce a detectable background of gravitational waves. As these phase transitions can be generated by new physics, it is important to quantify these effects. Many pure Yang-Mills gauge theories are known to undergo first-order deconfinement phase transitions, with properties that can be studied with lattice simulations. Despite the recent surge of interest in $Sp(2N)$ gauge theories as a candidate for models of physics beyond the standard model, studies of these theories at finite temperature are still very limited. In this contribution we will present preliminary results of an ongoing numerical investigation of the thermodynamic properties of the deconfinement phase transition in $Sp(4)$ Yang-Mills theory, using the linear logarithmic relaxation algorithm. This method enables us to obtain a highly accurate determination of the density of states, allowing for a precise reconstruction of thermodynamic observables. In particular, it gives access to otherwise difficult to determine quantities such as the free energy of the system, even along metastable and unstable branches, hence providing an additional direct observable to study the dynamics of the phase transition. △ Less

Submitted 3 October, 2023; originally announced October 2023.

Comments: 9 pages, 2 figures, contribution for the 40th International Symposium on Lattice Field Theory (Lattice 2023), July 31st - August 4th, 2023, Fermi National Accelerator Laboratory

Report number: RIKEN-iTHEMS-Report-23

An empirical potential for simulating hydrogen isotope retention in highly irradiated tungsten

Authors: Daniel R. Mason, Duc Nguyen-Manh, Victor W. Lindblad, Fredric G. Granberg, Mikhail Yu. Lavrentiev

Abstract: We describe the parameterization of a tungsten-hydrogen empirical potential designed for use with large-scale molecular dynamics simulations of highly irradiated tungsten containing hydrogen isotope atoms, and report test results. Particular attention has been paid to getting good elastic properties, including the relaxation volumes of small defect clusters, and to the interaction energy between h… ▽ More We describe the parameterization of a tungsten-hydrogen empirical potential designed for use with large-scale molecular dynamics simulations of highly irradiated tungsten containing hydrogen isotope atoms, and report test results. Particular attention has been paid to getting good elastic properties, including the relaxation volumes of small defect clusters, and to the interaction energy between hydrogen isotopes and typical irradiation-induced defects in tungsten. We conclude that the energy ordering of defects changes with the ratio of H atoms to point defects, indicating that this potential is suitable for exploring mechanisms of trap mutation, including vacancy loop to plate-like void transformations. △ Less

Submitted 18 May, 2023; originally announced May 2023.

First-order phase transitions in Yang-Mills theories and the density of state method

Authors: Biagio Lucini, David Mason, Maurizio Piai, Enrico Rinaldi, Davide Vadacchino

Abstract: When studied at finite temperature, Yang-Mills theories in $3+1$ dimensions display the presence of confinement/deconfinement phase transitions, which are known to be of first order -- the $SU(2)$ gauge theory being the exception. Theoretical as well as phenomenological considerations indicate that it is essential to establish a precise characterisation of these physical systems in proximity of su… ▽ More When studied at finite temperature, Yang-Mills theories in $3+1$ dimensions display the presence of confinement/deconfinement phase transitions, which are known to be of first order -- the $SU(2)$ gauge theory being the exception. Theoretical as well as phenomenological considerations indicate that it is essential to establish a precise characterisation of these physical systems in proximity of such phase transitions. We present and test a new method to study the critical region of parameter space in non-Abelian quantum field theories on the lattice, based upon the Logarithmic Linear Relaxation (LLR) algorithm. We apply this method to the $SU(3)$ Yang Mills lattice gauge theory, and perform extensive calculations with one fixed choice of lattice size. We identify the critical temperature, and measure interesting physical quantities near the transition. Among them, we determine the free energy of the model in the critical region, exposing for the first time its multi-valued nature with a numerical calculation from first principles, providing this novel evidence in support of a first order phase transition. This study sets the stage for future high precision measurements, by demonstrating the potential of the method. △ Less

Submitted 22 September, 2023; v1 submitted 12 May, 2023; originally announced May 2023.

Comments: 25 pages, 21 figures. Version accepted for publication

Report number: RIKEN-iTHEMS-Report-23 ET-0164A-23

The density of state method for first-order phase transitions in Yang-Mills theories

Authors: David Mason, Biagio Lucini, Maurizio Piai, Enrico Rinaldi, Davide Vadacchino

Abstract: Lattice Field Theory can be used to study finite temperature first-order phase transitions in new, strongly-coupled gauge theories of phenomenological interest. Metastable dynamics arising in proximity of the phase transition can lead to large, uncontrolled numerical errors when analysed with standard methods. In this contribution, we discuss a prototype lattice calculation in which the first-orde… ▽ More Lattice Field Theory can be used to study finite temperature first-order phase transitions in new, strongly-coupled gauge theories of phenomenological interest. Metastable dynamics arising in proximity of the phase transition can lead to large, uncontrolled numerical errors when analysed with standard methods. In this contribution, we discuss a prototype lattice calculation in which the first-order deconfinement transition in the strong Yang-Mills sector of the standard model is analysed using a novel lattice method, the logarithmic linear relaxation algorithm. This method provides a determination of the density of states of the system with exponential error suppression. △ Less

Submitted 8 December, 2022; v1 submitted 2 December, 2022; originally announced December 2022.

Comments: Minor improvements in abstract and notation. Content and results unchanged

Report number: RIKEN-iTHEMS-Report-22

The density of states method in Yang-Mills theories and first order phase transitions

Authors: David Mason, Biagio Lucini, Maurizio Piai, Enrico Rinaldi, Davide Vadacchino

Abstract: Extensions of the standard model that lead to first-order phase transitions in the early universe can produce a stochastic background of gravitational waves, which may be accessible to future detectors. Thermodynamic observables at the transition, such as the latent heat, can be determined by lattice simulations, and then used to predict the expected signatures in a given theory. In lattice calcul… ▽ More Extensions of the standard model that lead to first-order phase transitions in the early universe can produce a stochastic background of gravitational waves, which may be accessible to future detectors. Thermodynamic observables at the transition, such as the latent heat, can be determined by lattice simulations, and then used to predict the expected signatures in a given theory. In lattice calculations, the emergence of metastabilities in proximity of the phase transition may make the precise determination of these observables quite challenging, and may lead to large uncontrolled numerical errors. In this contribution, we discuss as a prototype lattice calculation the first order deconfinement transition that arises in the strong SU(3) Yang-Mills sector. We adopt the novel logarithmic linear relaxation method, which can provide a determination of the density of states of the system with exponential error suppression. Thermodynamic observables can be reconstructed with a controlled error, providing a promising direction for accurate model predictions in the future. △ Less

Submitted 18 November, 2022; originally announced November 2022.

Comments: 8 pages, 4 figures; contribution to the proceedings of the 15th Quark Confinement and the Hadron Spectrum conference (ConfXV), 1st-6th August 2022, Stavanger, Norway

Acoustic radiation from a superconducting qubit: From spontaneous emission to Rabi oscillations

Authors: Vijay Jain, Vladislav D. Kurilovich, Yanni D. Dahmani, Chan U Lei, David Mason, Taekwan Yoon, Peter T. Rakich, Leonid I. Glazman, Robert J. Schoelkopf

Abstract: Acoustic spontaneous emission into bulk dielectrics can be a strong source of decoherence in quantum devices, especially when a qubit is in the presence of piezoelectric materials. We study the dynamics of a qubit coupled to an acoustic resonator by a piezoelectric film. By varying the surface topography of the resonator from rough to polished to shaped, we explore the crossover from fast decay of… ▽ More Acoustic spontaneous emission into bulk dielectrics can be a strong source of decoherence in quantum devices, especially when a qubit is in the presence of piezoelectric materials. We study the dynamics of a qubit coupled to an acoustic resonator by a piezoelectric film. By varying the surface topography of the resonator from rough to polished to shaped, we explore the crossover from fast decay of an excited qubit to quantum-coherent coupling between the qubit and an isolated phonon mode. Our experimental approach may be used for precision measurements of crystalline vibrations, the design of quantum memories, and the study of electro-mechanical contributions to dielectric loss. △ Less

Submitted 14 November, 2022; originally announced November 2022.

Comments: 7 pages, 4 figures; 19 pages supplementary, 5 supplementary figures

Microstructure of a heavily irradiated metal exposed to a spectrum of atomic recoils

Authors: Max Boleininger, Daniel R. Mason, Andrea E. Sand, Sergei L. Dudarev

Abstract: At temperatures below the onset of vacancy migration, metals exposed to energetic ions develop dynamically fluctuating steady-state microstructures. Statistical properties of these microstructures in the asymptotic high exposure limit are not universal and vary depending on the energy and mass of the incident ions. We develop a model for the microstructure of an ion-irradiated metal under athermal… ▽ More At temperatures below the onset of vacancy migration, metals exposed to energetic ions develop dynamically fluctuating steady-state microstructures. Statistical properties of these microstructures in the asymptotic high exposure limit are not universal and vary depending on the energy and mass of the incident ions. We develop a model for the microstructure of an ion-irradiated metal under athermal conditions, where internal stress fluctuations dominate the kinetics of structural evolution. The balance between defect production and recombination depends sensitively not only on the total exposure to irradiation, defined by the dose, but also on the energy of the incident particles. The model predicts the defect content in the high dose limit as an integral of the spectrum of primary knock-on atom energies, with the finding that low energy ions produce a significantly higher amount of damage than high energy ions. △ Less

Submitted 12 October, 2022; v1 submitted 10 October, 2022; originally announced October 2022.

Comments: 9 pages, 5 figures, plus supplemental material

Simultaneous Brillouin and piezoelectric coupling to a high-frequency bulk acoustic resonator

Authors: Taekwan Yoon, David Mason, Vijay Jain, Yiwen Chu, Prashanta Kharel, William H. Renninger, Liam Collins, Luigi Frunzio, Robert J Schoelkopf, Peter T Rakich

Abstract: Bulk acoustic resonators support robust, long-lived mechanical modes, capable of coupling to various quantum systems. In separate works, such devices have achieved strong coupling to both superconducting qubits, via piezoelectricity, and optical cavities, via Brillouin interactions. In this work, we present a novel hybrid microwave/optical platform capable of coupling to bulk acoustic waves throug… ▽ More Bulk acoustic resonators support robust, long-lived mechanical modes, capable of coupling to various quantum systems. In separate works, such devices have achieved strong coupling to both superconducting qubits, via piezoelectricity, and optical cavities, via Brillouin interactions. In this work, we present a novel hybrid microwave/optical platform capable of coupling to bulk acoustic waves through cavity-enhanced piezoelectric and photoelastic interactions. The modular, tunable system achieves fully resonant and well-mode-matched interactions between a 3D microwave cavity, a high-frequency bulk acoustic resonator, and a Fabry Perot cavity. We realize this piezo-Brillouin interaction in x-cut quartz, demonstrating the potential for strong optomechanical interactions and high cooperativity using optical cavity enhancement. We further show how this device functions as a bidirectional electro-opto-mechanical transducer, with quantum efficiency exceeding $10^{-8}$, and a feasible path towards unity conversion efficiency. The high optical sensitivity and ability to apply large resonant microwave field in this system also offers a new tool for probing anomalous electromechanical couplings, which we demonstrate by investigating (nominally-centrosymmetric) CaF$_2$ and revealing a parasitic piezoelectricity of 83 am/V. Such studies are an important topic for emerging quantum technologies, and highlight the versatility of this new hybrid platform. △ Less

Submitted 30 January, 2023; v1 submitted 12 August, 2022; originally announced August 2022.

Speckle Interferometry at SOAR in 2021

Authors: Andrei Tokovinin, Brian D. Mason, Rene A. Mendez, Edgardo Costa

Abstract: The speckle interferometry program at the the 4.1 m Southern Astrophysical Research Telescope (SOAR), started in 2008, now accumulated over 30,300 individual observations of 12,700 distinct targets. Its main goal is to monitor orbital motion of close binaries, including members of high-order hierarchies and low-mass dwarfs in the solar neighborhood. The results from 2021 are published here, totali… ▽ More The speckle interferometry program at the the 4.1 m Southern Astrophysical Research Telescope (SOAR), started in 2008, now accumulated over 30,300 individual observations of 12,700 distinct targets. Its main goal is to monitor orbital motion of close binaries, including members of high-order hierarchies and low-mass dwarfs in the solar neighborhood. The results from 2021 are published here, totaling 2,623 measurements of 2,123 resolved pairs and non-resolutions of 763 targets. The median measured separation is 0.21", and 75 pairs were closer than 30 mas. The calibration of scale and orientation is based on the observations of 103 wide pairs with well-modeled motion. These calibrators are compared to the latest Gaia data release, and minor (0.5%) systematic errors were rectified, resulting in accurate relative positions with typical errors on the order of 1 mas. Using these new measurements, orbits of 282 binaries are determined here (54 first determinations and 228 corrections). We resolved for the first time 50 new pairs, including subsystems in known binaries. A list of 94 likely spurious pairs unresolved at SOAR (mostly close Hipparcos binaries) is also given. △ Less

Submitted 6 July, 2022; originally announced July 2022.

Comments: Accepted by AJ. 14 pages, 5 figures, 8 tables. Full electronic tables 2,3,6,7 are available at http://www.ctio.noirlab.edu/~atokovin/papers/SOAR2021-tables.tar.gz. arXiv admin note: text overlap with arXiv:2105.07040

Chip-Based Laser with 1 Hertz Integrated Linewidth

Authors: Joel Guo, Charles A. McLemore, Chao Xiang, Dahyeon Lee, Lue Wu, Warren **, Megan Kelleher, Naijun **, David Mason, Lin Chang, Avi Feshali, Mario Paniccia, Peter T. Rakich, Kerry J. Vahala, Scott A. Diddams, Franklyn Quinlan, John E. Bowers

Abstract: Lasers with hertz-level linewidths on timescales up to seconds are critical for precision metrology, timekee**, and manipulation of quantum systems. Such frequency stability typically relies on bulk-optic lasers and reference cavities, where increased size is leveraged to improve noise performance, but with the trade-off of cost, hand assembly, and limited application environments. On the other… ▽ More Lasers with hertz-level linewidths on timescales up to seconds are critical for precision metrology, timekee**, and manipulation of quantum systems. Such frequency stability typically relies on bulk-optic lasers and reference cavities, where increased size is leveraged to improve noise performance, but with the trade-off of cost, hand assembly, and limited application environments. On the other hand, planar waveguide lasers and cavities exploit the benefits of CMOS scalability but are fundamentally limited from achieving hertz-level linewidths at longer times by stochastic noise and thermal sensitivity inherent to the waveguide medium. These physical limits have inhibited the development of compact laser systems with frequency noise required for portable optical clocks that have performance well beyond conventional microwave counterparts. In this work, we break this paradigm to demonstrate a compact, high-coherence laser system at 1548 nm with a 1 s integrated linewidth of 1.1 Hz and fractional frequency instability less than 10$^{-14}$ from 1 ms to 1 s. The frequency noise at 1 Hz offset is suppressed by 11 orders of magnitude from that of the free-running diode laser down to the cavity thermal noise limit near 1 Hz$^2$/Hz, decreasing to 10$^{-3}$ Hz$^2$/Hz at 4 kHz offset. This low noise performance leverages wafer-scale integrated lasers together with an 8 mL vacuum-gap cavity that employs micro-fabricated mirrors with sub-angstrom roughness to yield an optical $Q$ of 11.8 billion. Significantly, all the critical components are lithographically defined on planar substrates and hold the potential for parallel high-volume manufacturing. Consequently, this work provides an important advance towards compact lasers with hertz-level linewidths for applications such as portable optical clocks, low-noise RF photonic oscillators, and related communication and navigation systems. △ Less

Submitted 30 March, 2022; originally announced March 2022.

Micro-fabricated mirrors with finesse exceeding one million

Authors: Naijun **, Charles A. McLemore, David Mason, James P. Hendrie, Yizhi Luo, Megan L. Kelleher, Prashanta Kharel, Franklyn Quinlan, Scott A. Diddams, Peter T. Rakich

Abstract: The Fabry-Pérot resonator is one of the most widely used optical devices, enabling scientific and technological breakthroughs in diverse fields including cavity QED, optical clocks, precision length metrology and spectroscopy. Though resonator designs vary widely, all high-end applications benefit from mirrors with the lowest loss and highest finesse possible. Fabrication of the highest finesse mi… ▽ More The Fabry-Pérot resonator is one of the most widely used optical devices, enabling scientific and technological breakthroughs in diverse fields including cavity QED, optical clocks, precision length metrology and spectroscopy. Though resonator designs vary widely, all high-end applications benefit from mirrors with the lowest loss and highest finesse possible. Fabrication of the highest finesse mirrors relies on centuries-old mechanical polishing techniques, which offer losses at the part-per-million (ppm) level. However, no existing fabrication techniques are able to produce high finesse resonators with the large range of mirror geometries needed for scalable quantum devices and next-generation compact atomic clocks. In this paper, we introduce a new and scalable approach to fabricate mirrors with ultrahigh finesse ($\geq 10^{6}$) and user-defined radius of curvature spanning four orders of magnitude ($10^{-4}-10^{0}$ m). We employ photoresist reflow and reactive ion etching to shape and transfer mirror templates onto a substrate while maintaining sub-Angstrom roughness. This substrate is coated with a dielectric stack and used to create arrays of compact Fabry-Pérot resonators with finesse values as high as 1.3 million and measured excess loss $<$ 1 ppm. Optical ringdown measurements of 43 devices across 5 substrates reveal that the fabricated cavity mirrors -- with both small and large radii of curvature -- produce an average coating-limited finesse of 1.05 million. This versatile new approach opens the door to scalable fabrication of high-finesse miniaturized Fabry-Pérot cavities needed for emerging quantum optics and frequency metrology technologies. △ Less

Submitted 7 June, 2022; v1 submitted 29 March, 2022; originally announced March 2022.

Comments: 16 pages, 9 figures

Thermal noise-limited laser stabilization to an 8 mL volume Fabry-Pérot reference cavity with microfabricated mirrors

Authors: Charles A. McLemore, Naijun **, Megan L. Kelleher, James P. Hendrie, David Mason, Yizhi Luo, Dahyeon Lee, Peter Rakich, Scott A. Diddams, Franklyn Quinlan

Abstract: Lasers stabilized to vacuum-gap Fabry-Pérot optical reference cavities display extraordinarily low noise and high stability, with linewidths much less than 1 Hz. These lasers can expand into new applications and ubiquitous use with the development of compact, portable cavities that are manufacturable at scale. Here we demonstrate an 8 mL volume Fabry-Pérot cavity constructed with mirrors that are… ▽ More Lasers stabilized to vacuum-gap Fabry-Pérot optical reference cavities display extraordinarily low noise and high stability, with linewidths much less than 1 Hz. These lasers can expand into new applications and ubiquitous use with the development of compact, portable cavities that are manufacturable at scale. Here we demonstrate an 8 mL volume Fabry-Pérot cavity constructed with mirrors that are fabricated lithographically with finesse near 1 million. A laser locked to the cavity exhibits phase noise limited by the cavity thermal noise for offset frequencies ranging from 1 Hz to $\approx$ 1 kHz, with a fractional frequency stability of 7$\times$10$^{-15}$ at 1 second. Furthermore, the use of microfabricated mirrors allows us to expand the design space of centimeter-scale cavities, and we explore the noise implications of pushing towards cavity volumes of 2 mL or less. △ Less

Submitted 29 March, 2022; originally announced March 2022.

Comments: 7 pages, 4 figures

Volume of a dislocation network

Authors: Max Boleininger, Sergei L. Dudarev, Daniel R. Mason, Enrique Martínez

Abstract: We derive a simple analytical line integral expression for the relaxation volume tensor of an arbitrary interconnected dislocation network. This quantity determines the magnitude of dislocation contribution to the dimensional changes and volumetric swelling of a material, and highlights the fundamental dual role of dislocations as sources of internal strain as well as carriers of plastic deformati… ▽ More We derive a simple analytical line integral expression for the relaxation volume tensor of an arbitrary interconnected dislocation network. This quantity determines the magnitude of dislocation contribution to the dimensional changes and volumetric swelling of a material, and highlights the fundamental dual role of dislocations as sources of internal strain as well as carriers of plastic deformation. To illustrate applications of the method, we compute the relaxation volume of a stacking fault tetrahedron, a defect commonly occurring in fcc metals; the volume of an unusual tetrahedral configuration formed by the (a/2)<111> and a<001> dislocations in a bcc metal; and estimate the relative contribution of extended dislocations to the volume relaxation of heavily irradiated tungsten. △ Less

Submitted 11 October, 2022; v1 submitted 10 March, 2022; originally announced March 2022.

Comments: 15 pages, 6 figures

Journal ref: Physical Review Materials, 6(6), 063601 (2022)

Impressions of the GDMC AI Settlement Generation Challenge in Minecraft

Authors: Christoph Salge, Claus Aranha, Adrian Brightmoore, Sean Butler, Rodrigo Canaan, Michael Cook, Michael Cerny Green, Hagen Fischer, Christian Guckelsberger, Jupiter Hadley, Jean-Baptiste Hervé, Mark R Johnson, Quinn Kybartas, David Mason, Mike Preuss, Tristan Smith, Ruck Thawonmas, Julian Togelius

Abstract: The GDMC AI settlement generation challenge is a PCG competition about producing an algorithm that can create an "interesting" Minecraft settlement for a given map. This paper contains a collection of written experiences with this competition, by participants, judges, organizers and advisors. We asked people to reflect both on the artifacts themselves, and on the competition in general. The aim of… ▽ More The GDMC AI settlement generation challenge is a PCG competition about producing an algorithm that can create an "interesting" Minecraft settlement for a given map. This paper contains a collection of written experiences with this competition, by participants, judges, organizers and advisors. We asked people to reflect both on the artifacts themselves, and on the competition in general. The aim of this paper is to offer a shareable and edited collection of experiences and qualitative feedback - which seem to contain a lot of insights on PCG and computational creativity, but would otherwise be lost once the output of the competition is reduced to scalar performance values. We reflect upon some organizational issues for AI competitions, and discuss the future of the GDMC competition. △ Less

Submitted 6 August, 2021; originally announced August 2021.

Comments: 28 pages, 5 figures

An estimate for thermal diffusivity in highly irradiated tungsten using Molecular Dynamics simulation

Authors: Daniel R Mason, Abdallah Reza, Fredric Granberg, Felix Hofmann

Abstract: The changing thermal conductivity of an irradiated material is among the principal design considerations for any nuclear reactor, but at present few models are capable of predicting these changes starting from an arbitrary atomistic model. Here we present a simple model for computing the thermal diffusivity of tungsten, based on the conductivity of the perfect crystal and resistivity per Frenkel p… ▽ More The changing thermal conductivity of an irradiated material is among the principal design considerations for any nuclear reactor, but at present few models are capable of predicting these changes starting from an arbitrary atomistic model. Here we present a simple model for computing the thermal diffusivity of tungsten, based on the conductivity of the perfect crystal and resistivity per Frenkel pair, and dividing a simulation into perfect and athermal regions statistically. This is applied to highly irradiated microstructures simulated with Molecular Dynamics. A comparison to experiment shows that simulations closely track observed thermal diffusivity over a range of doses from the dilute limit of a few Frenkel pairs to the high dose saturation limit at 3 displacements per atom (dpa). △ Less

Submitted 24 November, 2021; v1 submitted 25 June, 2021; originally announced June 2021.

Comments: preprint submitted to journal

Parameter-free quantitative simulation of high dose microstructure and hydrogen retention in ion-irradiated tungsten

Authors: Daniel R. Mason, Fredric Granberg, Max Boleininger, Thomas Schwarz-Selinger, Kai Nordlund, Sergei L. Dudarev

Abstract: Hydrogen isotopes are retained in materials for fusion power applications, changing both hydrogen embrittlement and tritium inventory as the microstructure undergoes irradiation damage. But modelling of highly damaged materials - exposed to over 0.1 displacements per atom (dpa) - where asymptotic saturation is observed, for example tungsten facing the plasma in a fusion tokamak reactor, is difficu… ▽ More Hydrogen isotopes are retained in materials for fusion power applications, changing both hydrogen embrittlement and tritium inventory as the microstructure undergoes irradiation damage. But modelling of highly damaged materials - exposed to over 0.1 displacements per atom (dpa) - where asymptotic saturation is observed, for example tungsten facing the plasma in a fusion tokamak reactor, is difficult because a highly damaged microstructure cannot be treated as weakly interacting isolated defect traps. In this paper we develop computational techniques to find the defect content in highly irradiated materials without adjustable parameters. First we show how to generate converged high dose (>1 dpa) microstructures using a combination of the creation-relaxation algorithm and molecular dynamics simulations of collision cascades. Then we make robust estimates of point defects and void regions with simple developments of the Wigner-Seitz decomposition of lattice sites. We use our estimates of the void surface area to predict the deuterium retention capacity of tungsten as a function of dose. This is then compared to 3He nuclear reaction analysis (NRA) measurements of tungsten samples self-irradiated at 290 K to different damage doses and exposed to deuterium plasma at low energy at 370 K. We show that our simulated microstructures give an excellent match to the experimental data, with both model and experiment showing 1.5-2.0 at.% deuterium retained in tungsten in the limit of high dose. △ Less

Submitted 24 June, 2021; originally announced June 2021.

Comments: preprint for submission to journal

Journal ref: Phys. Rev. Materials 5, 095403 (2021)

Speckle Interferometry at SOAR in 2020

Authors: Andrei Tokovinin, Brian D. Mason, Rene A. Mendez, Edgardo Costa, Andrew W. Mann, Todd J. Henry

Abstract: The results of speckle interferometric observations at the 4.1 m Southern Astrophysical Research Telescope (SOAR) in 2020, as well as earlier unpublished data, are given, totaling 1735 measurements of 1288 resolved pairs and non-resolutions of 1177 targets. We resolved for the first time 59 new pairs or subsystems in known binaries, mostly among nearby dwarf stars. This work continues our long-ter… ▽ More The results of speckle interferometric observations at the 4.1 m Southern Astrophysical Research Telescope (SOAR) in 2020, as well as earlier unpublished data, are given, totaling 1735 measurements of 1288 resolved pairs and non-resolutions of 1177 targets. We resolved for the first time 59 new pairs or subsystems in known binaries, mostly among nearby dwarf stars. This work continues our long-term speckle program. Its main goal is to monitor orbital motion of close binaries, including members of high-order hierarchies and Hipparcos pairs in the solar neighborhood. We also report observations of 892 members of young moving groups and associations, where we resolved 103 new pairs. △ Less

Submitted 14 May, 2021; originally announced May 2021.

Comments: Accepted by AJ; 11 pages, 6 figures, 5 tables. The data tables are available at http://www.ctio.noao.edu/~atokovin/papers/datafiles2020.tar.gz. arXiv admin note: text overlap with arXiv:2005.05305, arXiv:1905.10436

Prandtl's extended mixing length model applied to the two-dimensional turbulent classical far wake

Authors: AJ Hutchinson, N Hale, K Born, DP Mason

Abstract: Despite its limitations, Prandtl's mixing length model is widely applied in modelling turbulent free shear flows. Prandtl's extended model addresses many of the shortfalls of the original model, but is not so widely used, in part due to additional mathematical complexities that arise in its derivation and implementation. Furthermore, in both models Prandtl neglects the kinematic viscosity on the b… ▽ More Despite its limitations, Prandtl's mixing length model is widely applied in modelling turbulent free shear flows. Prandtl's extended model addresses many of the shortfalls of the original model, but is not so widely used, in part due to additional mathematical complexities that arise in its derivation and implementation. Furthermore, in both models Prandtl neglects the kinematic viscosity on the basis that it is much smaller in magnitude than the turbulent viscosity. Recent work has shown that including the kinematic viscosity in the original model has both mathematical and physical advantages. In the present work, a novel derivation of the extended model is provided, and it is demonstrated that similar advantages are again obtained when the kinematic viscosity is included. Additionally, through the use of scaling techniques, similarity mean velocity profiles of the extended model are derived, resulting in a single nonlinear ordinary differential equation that is solved numerically with a Hermite spectral method. The computed profiles for the normalised similarity mean velocity and shear stress are compared to experimental observations and shown to be in excellent agreement. △ Less

Submitted 21 January, 2021; originally announced January 2021.

Comments: 21 pages, 5 figures

MSC Class: 76F40

Hubble Space Telescope Snapshot Survey for Resolved Companions of Galactic Cepheids: Final Results

Authors: Nancy Remage Evans, H. Moritz Guenther, Howard E. Bond, Gail H. Schaefer, Brian D. Mason, Margarita Karovska, Evan Tingle, Scott Wolk, Scott Engle, Edward Guinan, Ignazio Pillitteri, Charles Proffitt, Pierre Kervella, Alexandre Gallenne, Richard I. Anderson, Maxwell Moe

Abstract: Cepheids in multiple systems provide information on the outcome of the formation of massive stars. They can also lead to exotic end-stage objects. This study concludes our survey of 70 galactic Cepheids using the {\it Hubble Space Telescope\} (\HST) Wide Field Camera~3 (WFC3) with images at two wavelengths to identify companions closer than $5\arcsec$. In the entire WFC3 survey we identify 16 prob… ▽ More Cepheids in multiple systems provide information on the outcome of the formation of massive stars. They can also lead to exotic end-stage objects. This study concludes our survey of 70 galactic Cepheids using the {\it Hubble Space Telescope\} (\HST) Wide Field Camera~3 (WFC3) with images at two wavelengths to identify companions closer than $5\arcsec$. In the entire WFC3 survey we identify 16 probable companions for 13 Cepheids. The seven Cepheids having resolved candidate companions within $2"$ all have the surprising property of themselves being spectroscopic binaries (as compared with a 29\% incidence of spectroscopic binaries in the general Cepheid population). That is a strong suggestion that an inner binary is linked to the scenario of a third companion within a few hundred~AU\null. This characteristic is continued for more widely separated companions. Under a model where the outer companion is formed first, it is unlikely that it can anticipate a subsequent inner binary. Rather it is more likely that a triple system has undergone dynamical interaction, resulting in one star moving outward to its current location. {\it Chandra\} and {\it Gaia\} data as well as radial velocities and \HSTSTIS and {\it IUE\} spectra are used to derive properties of the components of the Cepheid systems. The colors of the companion candidates show a change in distribution at approximately 2000~AU separations, from a range including both hot and cool colors for closer companions, to only low-mass companions for wider separations. △ Less

Submitted 15 October, 2020; originally announced October 2020.

Comments: Accepted by ApJ

Observation of transient and asymptotic driven structural states of tungsten exposed to irradiation

Authors: Daniel R. Mason, Suchandrima Das, Peter M. Derlet, Sergei L. Dudarev, Andrew London, Hongbing Yu, Nicholas W. Phillips, David Yang, Kenichiro Mizohata, Ruqing Xu, Felix Hofmann

Abstract: Combining spatially resolved X-ray Laue diffraction with atomic-scale simulations, we observe how ion-irradiated tungsten undergoes a series of non-linear structural transformations with increasing irradiation exposure. Nanoscale defect-induced deformations accumulating above 0.02 displacements per atom (dpa) lead to highly fluctuating strains at ~0.1 dpa, collapsing into a driven quasi-steady str… ▽ More Combining spatially resolved X-ray Laue diffraction with atomic-scale simulations, we observe how ion-irradiated tungsten undergoes a series of non-linear structural transformations with increasing irradiation exposure. Nanoscale defect-induced deformations accumulating above 0.02 displacements per atom (dpa) lead to highly fluctuating strains at ~0.1 dpa, collapsing into a driven quasi-steady structural state above ~1 dpa. The driven asymptotic state is characterized by finely dispersed vacancy defects coexisting with an extended dislocation network, and exhibits positive volumetric swelling due to the creation of new crystallographic planes through self-interstitial coalescence, but negative lattice strain. △ Less

Submitted 5 October, 2020; v1 submitted 30 July, 2020; originally announced July 2020.

Comments: 9 pages, 9 figures, in print with PRL

Gravitational wave detectors with broadband high frequency sensitivity

Authors: Michael A. Page, Maxim Goryachev, Haixing Miao, Yanbei Chen, Yiqiu Ma, David Mason, Massimiliano Rossi, Carl D. Blair, Li Ju, David G. Blair, Albert Schliesser, Michael E. Tobar, Chunnong Zhao

Abstract: The binary neutron star coalescence GW170817 was observed by gravitational wave detectors during the inspiral phase but sensitivity in the 1-5 kHz band was insufficient to observe the expected nuclear matter signature of the merger itself, and the process of black hole formation. This provides strong motivation for improving 1--5 kHz sensitivity which is currently limited by photon shot noise. Res… ▽ More The binary neutron star coalescence GW170817 was observed by gravitational wave detectors during the inspiral phase but sensitivity in the 1-5 kHz band was insufficient to observe the expected nuclear matter signature of the merger itself, and the process of black hole formation. This provides strong motivation for improving 1--5 kHz sensitivity which is currently limited by photon shot noise. Resonant enhancement by signal recycling normally improves the signal to noise ratio at the expense of bandwidth. The concept of optomechanical white light signal recycling (WLSR) has been proposed, but all schemes to date have been reliant on the development of suitable ultra-low mechanical loss components. Here for the first time we show demonstrated optomechanical resonator structures that meet the loss requirements for a WLSR interferometer with strain sensitivity below 10$^{-24}$ Hz$^{-1/2}$ at a few kHz. Experimental data for two resonators are combined with analytic models of 4km interferometers similar to LIGO, to demonstrate sensitivity enhancement across a much broader band of neutron star coalescence frequencies than dual-recycled Fabry-Perot Michelson detectors of the same length. One candidate resonator is a silicon nitride membrane acoustically isolated from the environment by a phononic crystal. The other is a single-crystal quartz lens that supports bulk acoustic longitudinal waves. Optical power requirements could prefer the membrane resonator, although the bulk acoustic wave resonator gives somewhat better thermal noise performance. Both could be implemented as add-on components to existing detectors. △ Less

Submitted 17 July, 2020; originally announced July 2020.

Journal ref: Communications Physics 4, 27 (2021)

Statistical mechanics of kinks on a gliding screw dislocation

Authors: M. Boleininger, M. Gallauer, S. L. Dudarev, T. D. Swinburne, D. R. Mason, D. Perez

Abstract: The ability of a body-centered cubic metal to deform plastically is limited by the thermally activated glide motion of screw dislocations, which are line defects with a mobility exhibiting complex dependence on temperature, stress, and dislocation segment length. We derive an analytical expression for the velocity of dislocation glide, based on a statistical mechanics argument, and identify an app… ▽ More The ability of a body-centered cubic metal to deform plastically is limited by the thermally activated glide motion of screw dislocations, which are line defects with a mobility exhibiting complex dependence on temperature, stress, and dislocation segment length. We derive an analytical expression for the velocity of dislocation glide, based on a statistical mechanics argument, and identify an apparent phase transition marked by a critical temperature above which the activation energy for glide effectively halves, changing from the formation energy of a double kink to that of a single kink. The analysis is in quantitative agreement with direct kinetic Monte Carlo simulations. △ Less

Submitted 27 May, 2020; v1 submitted 27 May, 2020; originally announced May 2020.

Comments: 9 pages, 5 figures. Submitted to Physical Review Research Updated: article meta-data

Journal ref: Phys. Rev. Research 2, 043254 (2020)

Speckle interferometry at SOAR in 2019

Authors: Andrei Tokovinin, Brian D. Mason, Rene A. Mendez, Edgardo Costa, Elliott P. Horch

Abstract: The results of speckle interferometric observations at the 4.1 m Southern Astrophysical Research Telescope (SOAR) in 2019 are given, totaling 2555 measurements of 1972 resolved pairs with separations from 15 mas (median 0.21") and magnitude difference up to 6 mag, and non-resolutions of 684 targets. We resolved for the first time 90 new pairs or subsystems in known binaries. This work continues ou… ▽ More The results of speckle interferometric observations at the 4.1 m Southern Astrophysical Research Telescope (SOAR) in 2019 are given, totaling 2555 measurements of 1972 resolved pairs with separations from 15 mas (median 0.21") and magnitude difference up to 6 mag, and non-resolutions of 684 targets. We resolved for the first time 90 new pairs or subsystems in known binaries. This work continues our long-term speckle program. Its main goal is to monitor orbital motion of close binaries, including members of high-order hierarchies and Hipparcos pairs in the solar neighborhood. We give a list of 127 orbits computed using our latest measurements. Their quality varies from excellent (25 orbits of grades 1 and 2) to provisional (47 orbits of grades 4 and 5). △ Less

Submitted 9 May, 2020; originally announced May 2020.

Comments: Accepted by The Astronomical Journal. 10 pages, 5 Figures. Measurements and non-resolutions, published electronically, are available from the first author. arXiv admin note: substantial text overlap with arXiv:1905.10436

Journal ref: 2020, AJ, 160, 7

Morphological analysis of 3d atom probe data using Minkowski functionals

Authors: Daniel R Mason, Andrew J London

Abstract: We present a morphological analysis of atom probe data of nanoscale microstructural features, using methods developed by the astrophysics community to describe the shape of superclusters of galaxies. We describe second-phase regions using Minkowski functionals, representing the regions' volume, surface area, mean curvature and Euler characteristic. The alloy data in this work show microstructures… ▽ More We present a morphological analysis of atom probe data of nanoscale microstructural features, using methods developed by the astrophysics community to describe the shape of superclusters of galaxies. We describe second-phase regions using Minkowski functionals, representing the regions' volume, surface area, mean curvature and Euler characteristic. The alloy data in this work show microstructures that can be described as sponge-like, filament-like, plate-like, and sphere-like at different concentration levels, and we find quantitative measurements of these features. To reduce user decision-making in constructing isosurfaces and to enhance the accuracy of the analysis a maximum likelihood based denoising filter was developed. We show that this filter performs significantly better than a simple Gaussian smoothing filter. We also interpolate the data using natural cubic splines, to refine voxel sizes and to refine the surface. We demonstrate that it is possible to find a mathematically well-defined, quantitative description of microstructure from atomistic datasets, to sub-voxel resolution, without user-tuneable parameters. △ Less

Submitted 29 January, 2020; originally announced January 2020.

Comments: Author Accepted Manuscript Paper Accepted for publication in Ultramicroscopy

Entanglement of Propagating Optical Modes via a Mechanical Interface

Authors: Junxin Chen, Massimiliano Rossi, David Mason, Albert Schliesser

Abstract: Many applications of quantum information processing (QIP) require distribution of quantum states in networks, both within and between distant nodes. Optical quantum states are uniquely suited for this purpose, as they propagate with ultralow attenuation and are resilient to ubiquitous thermal noise. Mechanical systems are then envisioned as versatile interfaces between photons and a variety of sol… ▽ More Many applications of quantum information processing (QIP) require distribution of quantum states in networks, both within and between distant nodes. Optical quantum states are uniquely suited for this purpose, as they propagate with ultralow attenuation and are resilient to ubiquitous thermal noise. Mechanical systems are then envisioned as versatile interfaces between photons and a variety of solid-state QIP platforms. Here, we demonstrate a key step towards this vision, and generate entanglement between two propagating optical modes, by coupling them to the same, cryogenic mechanical system. The entanglement persists at room temperature, where we verify the inseparability of the bipartite state and fully characterize its logarithmic negativity by homodyne tomography. We detect, without any corrections, correlations corresponding to a logarithmic negativity of $E_\mathrm{N}=0.35$. Combined with quantum interfaces between mechanical systems and solid-state qubit processors already available or under development, this paves the way for mechanical systems enabling long-distance quantum information networking over optical fiber networks. △ Less

Submitted 19 November, 2019; v1 submitted 13 November, 2019; originally announced November 2019.

Comments: 31 pages, 13 figures

Journal ref: Nat Commun 11, 943 (2020)

Darling--Erdős theorem for Lévy processes at zero

Authors: Peter Kevei, David Mason

Abstract: We establish two equivalent versions of the Darling--Erdős theorem for Lévy processes in the domain of attraction of a stable process at zero with index $α\in(0,2)$. In the course of our proof we obtain a number of maximal and exponential inequalities for general Lévy processes, which should be of separate interest. We establish two equivalent versions of the Darling--Erdős theorem for Lévy processes in the domain of attraction of a stable process at zero with index $α\in(0,2)$. In the course of our proof we obtain a number of maximal and exponential inequalities for general Lévy processes, which should be of separate interest. △ Less

Submitted 16 June, 2019; originally announced June 2019.

MSC Class: 60G51; 60F05

Speckle interferometry at SOAR in 2018

Authors: Andrei Tokovinin, Brian D. Mason, Rene A. Mendez, Elliott P. Horch, Cesar Briceno

Abstract: The results of speckle interferometric observations at the 4.1 m Southern Astrophysical Research Telescope (SOAR) in 2018 are given, totaling 3097 measurements of 2427 resolved pairs with separations from 11 mas to 5.9" (median 0.15", magnitude difference up to 7 mag) and non-resolutions of 624 targets. This work continues our long-term speckle program. Its main goal is to monitor orbital motion o… ▽ More The results of speckle interferometric observations at the 4.1 m Southern Astrophysical Research Telescope (SOAR) in 2018 are given, totaling 3097 measurements of 2427 resolved pairs with separations from 11 mas to 5.9" (median 0.15", magnitude difference up to 7 mag) and non-resolutions of 624 targets. This work continues our long-term speckle program. Its main goal is to monitor orbital motion of close binaries, including members of high-order hierarchies and Hipparcos pairs in the solar neighborhood. Also, pre-main-sequence stars in the Orion OB1 association were surveyed, resolving 26 out of 118 targets. In addition, we report discovery of 35 new companions among field visual multiples (some of which are likely optical) and first-time resolutions of another 31 pairs. By combining the measurements given here with the published ones, we computed 76 orbits for the first time and updated orbital elements of 34 visual binaries. Their periods range from 0.65 to 1100 years, and their quality varies from first tentative solutions of grade 5 to accurate elements of grades 1 and 2. Finally, a list of 53 spurious pairs discovered by various techniques and unresolved at SOAR △ Less

Submitted 24 May, 2019; originally announced May 2019.

Comments: Accepted by The Astronomical Journal. 9 pages, 9 Figures, 8 tables. The electronic tables 2 and 3 are available from the first author

Time-Delayed Electrons from Higgs Decays to Right-Handed Neutrinos

Authors: John D. Mason

Abstract: We consider the physics reach at the high luminosity LHC (HL-LHC) using the timing capability of a minimum ionizing particle (MIP) timing layer and the electromagnetic calorimeter in the CMS experiment for a simplified right-handed neutrino effective theory. In the simplified model, the lightest right-handed neutrinos are produced through higgs decay with mean decay lengths of order… ▽ More We consider the physics reach at the high luminosity LHC (HL-LHC) using the timing capability of a minimum ionizing particle (MIP) timing layer and the electromagnetic calorimeter in the CMS experiment for a simplified right-handed neutrino effective theory. In the simplified model, the lightest right-handed neutrinos are produced through higgs decay with mean decay lengths of order $\mathcal{O}(0.1~{\rm m}-100~{\rm m}$) and then subsequently decay into final states that include electrons. We consider the effect of several different kinematic cuts for a timing based analysis of this model. We demonstrate that if timing information can be successfully incorporated into the event trigger, it is possible to probe the higgs branching ratio to two right-handed neutrinos to the order $\mathcal{O}(10^{-5}) $ for a range of different right-handed neutrino lifetimes. △ Less

Submitted 19 May, 2019; originally announced May 2019.

Comments: 18 pages, 8 figures

Atomistic-Object Kinetic Monte Carlo simulations of irradiation damage in tungsten

Authors: Daniel R. Mason, Andrea E. Sand, Sergei L. Dudarev

Abstract: We describe the development of a new object kinetic Monte Carlo code where the elementary defect objects are off-lattice atomistic configurations. Atomic-level transitions are used to transform and translate objects, to split objects and to merge them together. This gradually constructs a database of atomic configurations -- a set of relevant defect objects and their possible events generated on-t… ▽ More We describe the development of a new object kinetic Monte Carlo code where the elementary defect objects are off-lattice atomistic configurations. Atomic-level transitions are used to transform and translate objects, to split objects and to merge them together. This gradually constructs a database of atomic configurations -- a set of relevant defect objects and their possible events generated on-the-fly. Elastic interactions are handled within objects with empirical potentials at short distances, and between spatially distinct objects using the dipole tensor formalism. The model is shown to evolve mobile interstitial clusters in tungsten faster than an equivalent molecular dynamics simulation, even at elevated temperatures. We apply the model to the evolution of complex defects generated using molecular dynamics simulations of primary radiation damage in tungsten. We show that we can evolve defect structures formed in cascade simulations to experimentally observable timescales of seconds while retaining atomistic detail. We conclude that the first few nanoseconds of simulation following cascade initiation would be better performed using molecular dynamics, as this will capture some of the near-temperature-independent evolution of small highly-mobile interstitial clusters. We also conclude that, for the 20keV PKA cascades annealing simulations considered here, internal relaxations of sessile objects difficult to capture using conventional object KMC with idealised object geometries establish the conditions for long timescale evolution. △ Less

Submitted 8 April, 2019; originally announced April 2019.

Relaxation volumes of microscopic and mesoscopic irradiation-induced defects in tungsten

Authors: Daniel R Mason, Duc Nguyen-Manh, Mihai-Cosmin Marinica, Rebecca Alexander, Sergei L Dudarev

Abstract: The low energy structures of irradiation-induced defects have been studied in detail, as these determine the available modes by which a defect can diffuse or relax. As a result, there are many studies concerning the relative energies of possible defect structures, and empirical potentials are commonly fitted to or evaluated with respect to these energies. But recently [Dudarev et al Nuclear Fusion… ▽ More The low energy structures of irradiation-induced defects have been studied in detail, as these determine the available modes by which a defect can diffuse or relax. As a result, there are many studies concerning the relative energies of possible defect structures, and empirical potentials are commonly fitted to or evaluated with respect to these energies. But recently [Dudarev et al Nuclear Fusion 2018], we have shown how to determine the stresses, strains and swelling of reactor components under irradiation from the elastic properties of ensembles of irradiation-induced defects. These elastic properties have received comparatively little attention. Here we evaluate relaxation volumes of irradiation-induced defects in tungsten computed with empirical potentials, and compare to density functional theory results where available. Different empirical potentials give different results, but some potential-independent trends in relaxation volumes can be identified. We show that the relaxation volume of small defects can be predicted to within 10% from their point-defect count. For larger defects we provide empirical fits for the relaxation volume of as a function of size. We demonstrate that the relaxation volume associated with a single primary-damage cascade can be estimated from the primary knock-on atom (PKA) energy. We conclude that while annihilation of vacancy- and interstitial- character defects will invariably reduce the total relaxation volume of the cascade debris, empirical potentials disagree whether coalescence of defects will reduce or increase the total relaxation volume. △ Less

Submitted 17 December, 2018; originally announced December 2018.

Observing and Verifying the Quantum Trajectory of a Mechanical Resonator

Authors: Massimiliano Rossi, David Mason, Junxin Chen, Albert Schliesser

Abstract: Continuous weak measurement allows localizing open quantum systems in state space, and tracing out their quantum trajectory as they evolve in time. Efficient quantum measurement schemes have previously enabled recording quantum trajectories of microwave photon and qubit states. We apply these concepts to a macroscopic mechanical resonator, and follow the quantum trajectory of its motional state co… ▽ More Continuous weak measurement allows localizing open quantum systems in state space, and tracing out their quantum trajectory as they evolve in time. Efficient quantum measurement schemes have previously enabled recording quantum trajectories of microwave photon and qubit states. We apply these concepts to a macroscopic mechanical resonator, and follow the quantum trajectory of its motional state conditioned on a continuous optical measurement record. Starting with a thermal mixture, we eventually obtain coherent states of 78% purity--comparable to a displaced thermal state of occupation 0.14. We introduce a retrodictive measurement protocol to directly verify state purity along the trajectory, and furthermore observe state collapse and decoherence. This opens the door to measurement-based creation of advanced quantum states, and potential tests of gravitational decoherence models. △ Less

Submitted 3 December, 2018; originally announced December 2018.

Comments: 20 pages, 4 figures

Journal ref: Phys. Rev. Lett. 123, 163601 (2019)

Speckle Interferometry at the U.S. Naval Observatory. XXIII

Authors: Brian D. Mason, William I. Hartkopf, Sean E. Urban, Jordan D. Josties

Abstract: The results of 3,989 intensified CCD observations of double stars, made with the 26-inch refractor of the U.S. Naval Observatory, are presented. Each observation of a system represents a combination of over two thousand short-exposure images. These observations are averaged into 1,911 mean relative positions and range in separation from 0.289 to 128.638, with a median separation of 8.669. Four orb… ▽ More The results of 3,989 intensified CCD observations of double stars, made with the 26-inch refractor of the U.S. Naval Observatory, are presented. Each observation of a system represents a combination of over two thousand short-exposure images. These observations are averaged into 1,911 mean relative positions and range in separation from 0.289 to 128.638, with a median separation of 8.669. Four orbits are improved. This is the 23rd in this series of papers and covers the period 4 January 2017 through 13 September 2017. △ Less

Submitted 2 November, 2018; originally announced November 2018.

Comments: 73 pages, 8 tables, 2 figures

Journal ref: AJ 156, 240, 2018

Continuous Force and Displacement Measurement Below the Standard Quantum Limit

Authors: David Mason, Junxin Chen, Massimiliano Rossi, Yeghishe Tsaturyan, Albert Schliesser

Abstract: Quantum mechanics dictates that the precision of physical measurements must be subject to certain constraints. In the case of inteferometric displacement measurements, these restrictions impose a 'standard quantum limit' (SQL), which optimally balances the precision of a measurement with its unwanted backaction. To go beyond this limit, one must devise more sophisticated measurement techniques, wh… ▽ More Quantum mechanics dictates that the precision of physical measurements must be subject to certain constraints. In the case of inteferometric displacement measurements, these restrictions impose a 'standard quantum limit' (SQL), which optimally balances the precision of a measurement with its unwanted backaction. To go beyond this limit, one must devise more sophisticated measurement techniques, which either 'evade' the backaction of the measurement, or achieve clever cancellation of the unwanted noise at the detector. In the half-century since the SQL was established, systems ranging from LIGO to ultracold atoms and nanomechanical devices have pushed displacement measurements towards this limit, and a variety of sub-SQL techniques have been tested in proof-of-principle experiments. However, to-date, no experimental system has successfully demonstrated an interferometric displacement measurement with sensitivity (including all relevant noise sources: thermal, backaction, and imprecision) below the SQL. Here, we exploit strong quantum correlations in an ultracoherent optomechanical system to demonstrate off-resonant force and displacement sensitivity reaching 1.5dB below the SQL. This achieves an outstanding goal in mechanical quantum sensing, and further enhances the prospects of using such devices for state-of-the-art force sensing applications. △ Less

Submitted 27 September, 2018; originally announced September 2018.

Comments: 18 pages, 7 figures

The WIYN One Degree Imager in 2018: An Extended 30-Detector Focal Plane

Authors: Daniel R. Harbeck, Mike Lesser, Wilson Liu, Bob Stupak, Ron George, Ron Harris, Gary Poczulp, Jayadev Rajagopal, Ralf Kotulla, David Ouellete, Eric J. Hooper, Michael Smith, Dustin Mason, Peter Onaka, Greg Chin, Emily Hunting, Robert Christensen

Abstract: We report on the upgraded One Degree Imager (ODI) at the WIYN 3.5 meter telescope at the Kitt Peak Observatory after the focal plane was expanded by an additional seventeen detectors in spring 2015. The now thirty Orthogonal Transfer Array CCD detectors provide a total field of view of 40' x 48' on the sky. The newly added detectors underwent a design revision to mitigate reduced charge transfer e… ▽ More We report on the upgraded One Degree Imager (ODI) at the WIYN 3.5 meter telescope at the Kitt Peak Observatory after the focal plane was expanded by an additional seventeen detectors in spring 2015. The now thirty Orthogonal Transfer Array CCD detectors provide a total field of view of 40' x 48' on the sky. The newly added detectors underwent a design revision to mitigate reduced charge transfer efficiency under low light conditions. We discuss the performance of the focal plane and challenges in the photometric calibration of the wide field of view, helped by the addition of telescope baffles. In a parallel project, we upgraded the instrument's three filter arm mechanisms, where a degrading worm-gear mechanism was replaced by a chain drive that is operating faster and with high reliability. Three more filters, a u' band and two narrow band filters were added to the instrument's complement, with two additional narrow band filters currently in procurement (including an H-alpha filter). We review the lessons learned during nearly three years of operating the instrument in the observatory environment and discuss infrastructure upgrades that were driven by ODI's needs. △ Less

Submitted 5 June, 2018; originally announced June 2018.

Comments: submitted to SPIE Astronomical Telescopes + Instrumentation conference

Measurement-based quantum control of mechanical motion

Authors: Massimiliano Rossi, David Mason, Junxin Chen, Yeghishe Tsaturyan, Albert Schliesser

Abstract: Controlling a quantum system based on the observation of its dynamics is inevitably complicated by the backaction of the measurement process. Efficient measurements, however, maximize the amount of information gained per disturbance incurred. Real-time feedback then enables both canceling the measurement's backaction and controlling the evolution of the quantum state. While such measurement-based… ▽ More Controlling a quantum system based on the observation of its dynamics is inevitably complicated by the backaction of the measurement process. Efficient measurements, however, maximize the amount of information gained per disturbance incurred. Real-time feedback then enables both canceling the measurement's backaction and controlling the evolution of the quantum state. While such measurement-based quantum control has been demonstrated in the clean settings of cavity and circuit quantum electrodynamics, its application to motional degrees of freedom has remained elusive. Here we show measurement-based quantum control of the motion of a millimetre-sized membrane resonator. An optomechanical transducer resolves the zero-point motion of the soft-clamped resonator in a fraction of its millisecond coherence time, with an overall measurement efficiency close to unity. We use this position record to feedback-cool a resonator mode to its quantum ground state (residual thermal occupation n = 0.29 +- 0.03), 9 dB below the quantum backaction limit of sideband cooling, and six orders of magnitude below the equilibrium occupation of its thermal environment. This realizes a long-standing goal in the field, and adds position and momentum to the degrees of freedom amenable to measurement-based quantum control, with potential applications in quantum information processing and gravitational wave detectors. △ Less

Submitted 10 September, 2018; v1 submitted 14 May, 2018; originally announced May 2018.

Comments: New version with corrected detection efficiency as determined with a NIST-calibrated photodiode, added references and revised structure. Main conclusions are identical. 41 pages, 18 figures

Journal ref: Nature 563, 53-58 (2018)

Speckle interferometry at SOAR in 2016 and 2017

Authors: Andrei Tokovinin, Brian D. Mason, William I. Hartkopf, Rene A. Mendez, Elliott P. Horch

Abstract: The results of speckle interferometric observations at the 4.1 m SOAR telescope in 2016 and 2017 are given, totaling 2483 measurements of 1570 resolved pairs and 609 non-resolutions. We describe briefly recent changes in the instrument and observing method and quantify the accuracy of the pixel scale and position angle calibration. Comments are given on 44 pairs resolved here for the first time. O… ▽ More The results of speckle interferometric observations at the 4.1 m SOAR telescope in 2016 and 2017 are given, totaling 2483 measurements of 1570 resolved pairs and 609 non-resolutions. We describe briefly recent changes in the instrument and observing method and quantify the accuracy of the pixel scale and position angle calibration. Comments are given on 44 pairs resolved here for the first time. Orbital motion of the newly resolved subsystem BU~83 Aa,Ab roughly agrees with its 36 year astrometric orbit proposed by J.~Dommanget. Most Tycho binaries examined here turned out to be spurious. △ Less

Submitted 27 April, 2018; originally announced April 2018.

Comments: Accepted by AJ. 11 pages, 5 figures. Electronic tables 3,4 are available from the 1st author

Speckle Interferometry of Red Dwarf Stars

Authors: Brian D. Mason, William I. Hartkopf, Korie N. Miles, John P. Subasavage, Deepak Raghavan, Todd J. Henry

Abstract: We report high resolution optical speckle observations of 336 M dwarfs which result in 113 measurements of relative position of 80 systems and 256 other stars with no indications of duplicity. These are the first measurements for two of the systems. We also present the earliest measures of relative position for 17 others. We include orbits for six of the systems, two revised and four reported for… ▽ More We report high resolution optical speckle observations of 336 M dwarfs which result in 113 measurements of relative position of 80 systems and 256 other stars with no indications of duplicity. These are the first measurements for two of the systems. We also present the earliest measures of relative position for 17 others. We include orbits for six of the systems, two revised and four reported for the first time. For one of the systems with a new orbit, G 161-7, we determine masses of 0.156 +/- 0.011 and 0.1175 +/-0.0079 \msun for the A and B components, respectively. All six of these new calculated orbits have short periods between five and thirty-eight years and hold the promise of deriving accurate masses in the near future. For many other pairs we can establish their nature as physical or chance alignment depending on their relative motion. Of the 80 systems, 32 have calculated orbits, 25 others are physical pairs, 4 are optical pairs and 19 are currently unknown. △ Less

Submitted 20 April, 2018; originally announced April 2018.

Comments: 29 pages, 2 figures, 7 tables

Super-resolution fluorescence microscopy by stepwise optical saturation

Authors: Yide Zhang, Prakash D. Nallathamby, Genevieve D. Vigil, Aamir A. Khan, Devon E. Mason, Joel D. Boerckel, Ryan K. Roeder, Scott S. Howard

Abstract: Super-resolution fluorescence microscopy is an important tool in biomedical research for its ability to discern features smaller than the diffraction limit. However, due to its difficult implementation and high cost, the universal application of super-resolution microscopy is not feasible. In this paper, we propose and demonstrate a new kind of super-resolution fluorescence microscopy that can be… ▽ More Super-resolution fluorescence microscopy is an important tool in biomedical research for its ability to discern features smaller than the diffraction limit. However, due to its difficult implementation and high cost, the universal application of super-resolution microscopy is not feasible. In this paper, we propose and demonstrate a new kind of super-resolution fluorescence microscopy that can be easily implemented and requires neither additional hardware nor complex post-processing. The microscopy is based on the principle of stepwise optical saturation (SOS), where $M$ steps of raw fluorescence images are linearly combined to generate an image with a $\sqrt{M}$-fold increase in resolution compared with conventional diffraction-limited images. For example, linearly combining (scaling and subtracting) two images obtained at regular powers extends resolution by a factor of $1.4$ beyond the diffraction limit. The resolution improvement in SOS microscopy is theoretically infinite but practically is limited by the signal-to-noise ratio. We perform simulations and experimentally demonstrate super-resolution microscopy with both one-photon (confocal) and multiphoton excitation fluorescence. We show that with the multiphoton modality, the SOS microscopy can provide super-resolution imaging deep in scattering samples. △ Less

Submitted 9 January, 2018; originally announced January 2018.

Comments: 14 pages, 10 figures, 1 table

Journal ref: Biomed. Opt. Express 9, 1613-1629 (2018)

HEPCloud, a New Paradigm for HEP Facilities: CMS Amazon Web Services Investigation

Authors: Burt Holzman, Lothar A. T. Bauerdick, Brian Bockelman, Dave Dykstra, Ian Fisk, Stuart Fuess, Gabriele Garzoglio, Maria Girone, Oliver Gutsche, Dirk Hufnagel, Hyunwoo Kim, Robert Kennedy, Nicolo Magini, David Mason, Panagiotis Spentzouris, Anthony Tiradani, Steve Timm, Eric W. Vaandering

Abstract: Historically, high energy physics computing has been performed on large purpose-built computing systems. These began as single-site compute facilities, but have evolved into the distributed computing grids used today. Recently, there has been an exponential increase in the capacity and capability of commercial clouds. Cloud resources are highly virtualized and intended to be able to be flexibly de… ▽ More Historically, high energy physics computing has been performed on large purpose-built computing systems. These began as single-site compute facilities, but have evolved into the distributed computing grids used today. Recently, there has been an exponential increase in the capacity and capability of commercial clouds. Cloud resources are highly virtualized and intended to be able to be flexibly deployed for a variety of computing tasks. There is a growing nterest among the cloud providers to demonstrate the capability to perform large-scale scientific computing. In this paper, we discuss results from the CMS experiment using the Fermilab HEPCloud facility, which utilized both local Fermilab resources and virtual machines in the Amazon Web Services Elastic Compute Cloud. We discuss the planning, technical challenges, and lessons learned involved in performing physics workflows on a large-scale set of virtualized resources. In addition, we will discuss the economics and operational efficiencies when executing workflows both in the cloud and on dedicated resources. △ Less

Submitted 29 September, 2017; originally announced October 2017.

Comments: 15 pages, 9 figures

Journal ref: Comput Softw Big Sci (2017) 1:1

Speckle Interferometry at the U.S. Naval Observatory. XXII

Authors: Brian D. Mason, William I. Hartkopf

Abstract: The results of 4,747 intensified CCD observations of double stars, made with the 26-inch refractor of the U.S. Naval Observatory, are presented. Each observation of a system represents a combination of over two thousand short-exposure images. These observations are averaged into 2,667 mean relative positions and range in separation from 0.328" to 95.9", with a median separation of 8.673". Four orb… ▽ More The results of 4,747 intensified CCD observations of double stars, made with the 26-inch refractor of the U.S. Naval Observatory, are presented. Each observation of a system represents a combination of over two thousand short-exposure images. These observations are averaged into 2,667 mean relative positions and range in separation from 0.328" to 95.9", with a median separation of 8.673". Four orbits are improved. This is the 22nd in this series of papers and covers the period 4 January 2016 through 29 December 2016. △ Less

Submitted 19 July, 2017; originally announced July 2017.

Comments: 91 pages, 8 tables, 1 figure

Binary Star Orbits. V. The Nearby White Dwarf - Red Dwarf pair 40 Eri BC

Authors: Brian D. Mason, William I. Hartkopf, Korie N. Miles

Abstract: A new relative orbit solution with new dynamical masses is determined for the nearby white dwarf - red dwarf pair 40 Eri BC. The period is 230.09+/-0.68y. It is predicted to close slowly over the next half-century getting as close as 1.32" in early 2066. We determine masses of 0.575+/-0.018 $m_\odot$ for the white dwarf and 0.2041+/-0.0064 $m_\odot$ for the red dwarf companion. The inconsistency o… ▽ More A new relative orbit solution with new dynamical masses is determined for the nearby white dwarf - red dwarf pair 40 Eri BC. The period is 230.09+/-0.68y. It is predicted to close slowly over the next half-century getting as close as 1.32" in early 2066. We determine masses of 0.575+/-0.018 $m_\odot$ for the white dwarf and 0.2041+/-0.0064 $m_\odot$ for the red dwarf companion. The inconsistency of the masses determined by gravitational redshift and dynamical techniques, due to a premature orbit calculation, no longer exists. △ Less

Submitted 19 July, 2017; v1 submitted 12 July, 2017; originally announced July 2017.

Comments: 25 pages, 5 tables, 1 figure

The Sirius System and its Astrophysical Puzzles: Hubble Space Telescope and Ground-Based Astrometry

Authors: Howard E. Bond, Gail H. Schaefer, Ronald L. Gilliland, Jay B. Holberg, Brian D. Mason, Irving W. Lindenblad, Miranda Seitz-McLeese, W. David Arnett, Pierre Demarque, Federico Spada, Patrick A. Young, Martin A. Barstow, Matthew R. Burleigh, Donald Gudehus

Abstract: Sirius, the seventh-nearest stellar system, is a visual binary containing the metallic-line A1 V star Sirius A, brightest star in the sky, orbited in a 50.13-year period by Sirius B, the brightest and nearest white dwarf (WD). Using images obtained over nearly two decades with the Hubble Space Telescope (HST), along with photographic observations covering almost 20 years, and nearly 2300 historica… ▽ More Sirius, the seventh-nearest stellar system, is a visual binary containing the metallic-line A1 V star Sirius A, brightest star in the sky, orbited in a 50.13-year period by Sirius B, the brightest and nearest white dwarf (WD). Using images obtained over nearly two decades with the Hubble Space Telescope (HST), along with photographic observations covering almost 20 years, and nearly 2300 historical measurements dating back to the 19th century, we determine precise orbital elements for the visual binary. Combined with the parallax and the motion of the A component, these elements yield dynamical masses of 2.063+/-0.023 Msun and 1.018+/-0.011 Msun for Sirius A and B, respectively. Our precise HST astrometry rules out third bodies orbiting either star in the system, down to masses of ~15-25 Mjup. The location of Sirius B in the H-R diagram is in excellent agreement with theoretical cooling tracks for WDs of its dynamical mass, and implies a cooling age of ~126 Myr. The position of Sirius B in the mass-radius plane is also consistent with WD theory, assuming a carbon-oxygen core. Including the pre-WD evolutionary timescale of the assumed progenitor, the total age of Sirius B is about 228+/-10 Myr. We calculated evolutionary tracks for stars with the dynamical mass of Sirius A, using two independent codes. We find it necessary to assume a slightly sub-solar metallicity, of about 0.85 Zsun, to fit its location in the luminosity-radius plane. The age of Sirius A based on these models is about 237-247 Myr, with uncertainties of +/-15 Myr, consistent with that of the WD companion. We discuss astrophysical puzzles presented by the Sirius system, including the probability that the two stars must have interacted in the past, even though there is no direct evidence for this, and the orbital eccentricity remains high. △ Less

Submitted 30 March, 2017; originally announced March 2017.

Comments: Accepted by Astrophysical Journal

Topological dynamics in an optomechanical system with highly non-degenerate modes

Authors: H. Xu, D. Mason, Luyao Jiang, J. G. E. Harris

Abstract: Non-Hermitian systems exhibit phenomena that are qualitatively different from those of Hermitian systems and have been exploited to achieve a number of ends, including the generation of exceptional points, nonreciprocal dynamics, non-orthogonal normal modes, and topological operations. However to date these effects have only been accessible with nearly-degenerate modes (i.e., modes with frequency… ▽ More Non-Hermitian systems exhibit phenomena that are qualitatively different from those of Hermitian systems and have been exploited to achieve a number of ends, including the generation of exceptional points, nonreciprocal dynamics, non-orthogonal normal modes, and topological operations. However to date these effects have only been accessible with nearly-degenerate modes (i.e., modes with frequency difference comparable to their linewidth and coupling rate). Here we demonstrate an optomechanical scheme that extends topological control to highly non-degenerate modes of a non-Hermitian system. Specifically, we induce a "virtual exceptional point" between two mechanical modes whose frequencies differ by >10^3 times their linewidth and coupling rate, and use adiabatic topological operations to transfer energy between these modes. This scheme can be readily implemented in many physical systems, potentially extending the utility of non-Hermitian dynamics to a much wider range of settings. △ Less

Submitted 21 March, 2017; originally announced March 2017.

Continued Kinematic and Photometric Investigations of Hierarchical Solar-Type Multiple Star Systems

Authors: Lewis C. Roberts, Jr., Andrei Tokovinin, Brian D. Mason, Anne D. Marinan

Abstract: We observed 15 of the solar-type binaries within 67 pc of the Sun previously observed by the Robo-AO system in the visible, with the PHARO near-IR camera and the PALM-3000 adaptive optics system on the 5 m Hale telescope. The physical status of the binaries is confirmed through common proper motion and detection of orbital motion. In the process we detected a new candidate companion to HIP 95309.… ▽ More We observed 15 of the solar-type binaries within 67 pc of the Sun previously observed by the Robo-AO system in the visible, with the PHARO near-IR camera and the PALM-3000 adaptive optics system on the 5 m Hale telescope. The physical status of the binaries is confirmed through common proper motion and detection of orbital motion. In the process we detected a new candidate companion to HIP 95309. We also resolved the primary of HIP 110626 into a close binary making that system a triple. These detections increase the completeness of the multiplicity survey of the solar-type stars within 67 pc of the Sun. Combining our observations of HIP 103455 with archival astrometric measurements and RV measurements, we are able to compute the first orbit of HIP 103455 showing that the binary has a 68 yr period. We place the components on a color-magnitude diagram and discuss each multiple system individually. △ Less

Submitted 20 January, 2017; originally announced January 2017.

Comments: Accepted to Astronomical Journal, 8 pages, 5 figures, 5 tables