Showing 1–50 of 221 results for author: Marzari, N

A comprehensive screening of plasma-facing materials for nuclear fusion

Authors: Andrea Fedrigucci, Nicola Marzari, Paolo Ricci

Abstract: Plasma-facing materials (PFMs) represent one of the most significant challenges for the design of future nuclear fusion reactors. Inside the reactor, the divertor will experience the harshest material environment: intense bombardment of neutrons and plasma particles coupled with large and intermittent heat fluxes. The material designated to cover this role in ITER is tungsten (W). While no other m… ▽ More Plasma-facing materials (PFMs) represent one of the most significant challenges for the design of future nuclear fusion reactors. Inside the reactor, the divertor will experience the harshest material environment: intense bombardment of neutrons and plasma particles coupled with large and intermittent heat fluxes. The material designated to cover this role in ITER is tungsten (W). While no other materials have shown the potential to match the properties of W, many drawbacks associated with its application remain, including: cracking and erosion induced by a low recrystallization temperature combined with a high ductile-brittle transition temperature and neutron-initiated embrittlement; surface morphology changes (fuzz layer) due to plasma-W interaction with subsequent risk of spontaneous material melting and delamination; low oxidation resistance. This work aims to produce a structured and comprehensive materials screening of PFMs candidates based on known inorganic materials. The methodology applied in this study to identify the most promising PFM candidates combines peer-reviewed data present in the Pauling File database and DFT calculations of two key PFMs defects, namely the surface binding energy and the formation energy of a hydrogen interstitial. The crystal structures and their related properties, extracted from the Pauling File, are ranked according to the heat-balance equation of a PFM subject to the heat loads in the divertor region of an ITER-like tokamak. The materials satisfying the requirements are critically compared with the state-of-the-art literature, defining an optimal subset where to perform the first-principles electronic structure calculations. The majority of previously known PFMs are captured by this screening process, confirming its reliability. Additionally, less familiar refractory materials suggest performance that calls for further investigations. △ Less

Submitted 30 June, 2024; originally announced July 2024.

Predicting electronic screening for fast Koopmans spectral functional calculations

Authors: Yannick Schubert, Sandra Luber, Nicola Marzari, Edward Linscott

Abstract: Koopmans spectral functionals represent a powerful extension of Kohn-Sham density-functional theory (DFT), enabling accurate predictions of spectral properties with state-of-the-art accuracy. The success of these functionals relies on capturing the effects of electronic screening through scalar, orbital-dependent parameters. These parameters have to be computed for every calculation, making Koopma… ▽ More Koopmans spectral functionals represent a powerful extension of Kohn-Sham density-functional theory (DFT), enabling accurate predictions of spectral properties with state-of-the-art accuracy. The success of these functionals relies on capturing the effects of electronic screening through scalar, orbital-dependent parameters. These parameters have to be computed for every calculation, making Koopmans spectral functionals more expensive than their DFT counterparts. In this work, we present a machine-learning model that -- with minimal training -- can predict these screening parameters directly from orbital densities calculated at the DFT level. We show on two prototypical use cases that using the screening parameters predicted by this model, instead of those calculated from linear response, leads to orbital energies that differ by less than 20 meV on average. Since this approach dramatically reduces run-times with minimal loss of accuracy, it will enable the application of Koopmans spectral functionals to classes of problems that previously would have been prohibitively expensive, such as the prediction of temperature-dependent spectral properties. △ Less

Submitted 21 June, 2024; originally announced June 2024.

Comments: 11 pages with 3 additional pages of Supplementary Information

Machine learning Hubbard parameters with equivariant neural networks

Authors: Martin Uhrin, Austin Zadoks, Luca Binci, Nicola Marzari, Iurii Timrov

Abstract: Density-functional theory with extended Hubbard functionals (DFT+$U$+$V$) provides a robust framework to accurately describe complex materials containing transition-metal or rare-earth elements. It does so by mitigating self-interaction errors inherent to semi-local functionals which are particularly pronounced in systems with partially-filled $d$ and $f$ electronic states. However, achieving accu… ▽ More Density-functional theory with extended Hubbard functionals (DFT+$U$+$V$) provides a robust framework to accurately describe complex materials containing transition-metal or rare-earth elements. It does so by mitigating self-interaction errors inherent to semi-local functionals which are particularly pronounced in systems with partially-filled $d$ and $f$ electronic states. However, achieving accuracy in this approach hinges upon the accurate determination of the on-site $U$ and inter-site $V$ Hubbard parameters. In practice, these are obtained either by semi-empirical tuning, requiring prior knowledge, or, more correctly, by using predictive but expensive first-principles calculations. Here, we present a machine learning model based on equivariant neural networks which uses atomic occupation matrices as descriptors, directly capturing the electronic structure, local chemical environment, and oxidation states of the system at hand. We target here the prediction of Hubbard parameters computed self-consistently with iterative linear-response calculations, as implemented in density-functional perturbation theory (DFPT), and structural relaxations. Remarkably, when trained on data from 11 materials spanning various crystal structures and compositions, our model achieves mean absolute relative errors of 3% and 5% for Hubbard $U$ and $V$ parameters, respectively. By circumventing computationally expensive DFT or DFPT self-consistent protocols, our model significantly expedites the prediction of Hubbard parameters with negligible computational overhead, while approaching the accuracy of DFPT. Moreover, owing to its robust transferability, the model facilitates accelerated materials discovery and design via high-throughput calculations, with relevance for various technological applications. △ Less

Submitted 4 June, 2024; originally announced June 2024.

Temperature-invariant heat conductivity from compensating crystalline and glassy transport: from the Steinbach meteorite to furnace bricks

Authors: Michele Simoncelli, Daniele Fournier, Massimiliano Marangolo, Etienne Balan, Keevin Béneut, Benoit Baptiste, Béatrice Doisneau, Nicola Marzari, Francesco Mauri

Abstract: The thermal conductivities of crystals and glasses vary strongly and with opposite trends upon heating, decreasing in crystals and increasing in glasses. Here, we show--both with first-principles predictions based on the Wigner transport equation and with thermoreflectance experiments--that the dominant transport mechanisms of crystals (particle-like propagation) and glasses (wave-like tunnelling)… ▽ More The thermal conductivities of crystals and glasses vary strongly and with opposite trends upon heating, decreasing in crystals and increasing in glasses. Here, we show--both with first-principles predictions based on the Wigner transport equation and with thermoreflectance experiments--that the dominant transport mechanisms of crystals (particle-like propagation) and glasses (wave-like tunnelling) can coexist and compensate in materials with crystalline bond order and nearly glassy bond geometry. We demonstrate that ideal compensation emerges in a sample of silica in the form of tridymite, carved from a meteorite found in Steinbach (Germany) in 1724, and yields a "propagation-tunneling-invariant" (PTI) conductivity that is independent from temperature and intermediate between the opposite trends of $α$-quartz crystal and silica glass. We show how such PTI conductivity occurs in the quantum regime below the Debye temperature, and can largely persist at high temperatures in a geometrically amorphous tridymite phase found in refractory bricks fired for years in furnaces for steel smelting. Last, we discuss implications to heat transfer in solids exposed to extreme temperature variations, ranging from planetary cooling to heating protocols to reduce the carbon footprint of industrial furnaces. △ Less

Submitted 21 May, 2024; originally announced May 2024.

Comments: 5+11 pages, 3+6 figures

Potential energy surfaces from many-body functionals: analytical benchmarks and conserving many-body approximations

Authors: Giovanna Lani, Nicola Marzari

Abstract: We investigate analytically the performance of many-body energy functionals, derived respectively by Klein and Luttinger and Ward, at different levels of diagrammatic approximations, ranging from second Born, to GW, to the so-called T-matrix, for the calculation of total energies and potential energy surfaces. We benchmark our theoretical results on the extended two-site Hubbard model, which is an… ▽ More We investigate analytically the performance of many-body energy functionals, derived respectively by Klein and Luttinger and Ward, at different levels of diagrammatic approximations, ranging from second Born, to GW, to the so-called T-matrix, for the calculation of total energies and potential energy surfaces. We benchmark our theoretical results on the extended two-site Hubbard model, which is analytically solvable and for which several exact properties can be calculated. Despite its simplicity, this model displays the physics of strongly correlated electrons: it is prototypical of the H$_2$ dissociation, a notoriously difficult problem to solve accurately for the majority of mean-field based approaches. We show that both functionals exhibit good to excellent variational properties, particularly in the case of the Luttinger-Ward one, which is in close agreement with fully self-consistent calculations, and elucidate the relation between the accuracy of the results and the different input one-body Green's functions. Provided that these are wisely chosen, we show how the Luttinger-Ward functional can be used as a computationally inexpensive alternative to fully self-consistent many-body calculations, without sacrificing the precision of the results obtained. Furthermore, in virtue of this accuracy, we argue that this functional can also be used to rank different many-body approximations at different regimes of electronic correlation, once again bypassing the need for self-consistency. △ Less

Submitted 25 April, 2024; originally announced April 2024.

Spectral Operator Representations

Authors: Austin Zadoks, Antimo Marrazzo, Nicola Marzari

Abstract: Machine learning in atomistic materials science has grown to become a powerful tool, with most approaches focusing on atomic arrangements, typically decomposed into local atomic environments. This approach, while well-suited for machine-learned interatomic potentials, is conceptually at odds with learning complex intrinsic properties of materials, often driven by spectral properties commonly repre… ▽ More Machine learning in atomistic materials science has grown to become a powerful tool, with most approaches focusing on atomic arrangements, typically decomposed into local atomic environments. This approach, while well-suited for machine-learned interatomic potentials, is conceptually at odds with learning complex intrinsic properties of materials, often driven by spectral properties commonly represented in reciprocal space (e.g., band gaps or mobilities) which cannot be readily atomically partitioned. For such applications, methods which represent the electronic rather than the atomic structure could be more promising. In this work, we present a general framework focused on electronic-structure descriptors which take advantage of the natural symmetries and inherent interpretability of physical models. Using this framework, we formulate two such representations and apply them respectively to measuring the similarity of carbon nanotubes and barium titanate polymorphs, and to the discovery of novel transparent conducting materials (TCMs) in the Materials Cloud 3D database (MC3D). A random forest classifier trained on 1% of the materials in the MC3D is able to correctly label 76% of entries in database which meet common screening criteria for promising TCMs. △ Less

Submitted 3 March, 2024; originally announced March 2024.

Comments: 29 pages, 8 figures, 2 tables

Developments and applications of the OPTIMADE API for materials discovery, design, and data exchange

Authors: Matthew L. Evans, Johan Bergsma, Andrius Merkys, Casper W. Andersen, Oskar B. Andersson, Daniel Beltrán, Evgeny Blokhin, Tara M. Boland, Rubén Castañeda Balderas, Kamal Choudhary, Alberto Díaz Díaz, Rodrigo Domínguez García, Hagen Eckert, Kristjan Eimre, María Elena Fuentes Montero, Adam M. Krajewski, Jens Jørgen Mortensen, José Manuel Nápoles Duarte, Jacob Pietryga, Ji Qi, Felipe de Jesús Trejo Carrillo, Antanas Vaitkus, Jusong Yu, Adam Zettel, Pedro Baptista de Castro , et al. (34 additional authors not shown)

Abstract: The Open Databases Integration for Materials Design (OPTIMADE) application programming interface (API) empowers users with holistic access to a growing federation of databases, enhancing the accessibility and discoverability of materials and chemical data. Since the first release of the OPTIMADE specification (v1.0), the API has undergone significant development, leading to the upcoming v1.2 relea… ▽ More The Open Databases Integration for Materials Design (OPTIMADE) application programming interface (API) empowers users with holistic access to a growing federation of databases, enhancing the accessibility and discoverability of materials and chemical data. Since the first release of the OPTIMADE specification (v1.0), the API has undergone significant development, leading to the upcoming v1.2 release, and has underpinned multiple scientific studies. In this work, we highlight the latest features of the API format, accompanying software tools, and provide an update on the implementation of OPTIMADE in contributing materials databases. We end by providing several use cases that demonstrate the utility of the OPTIMADE API in materials research that continue to drive its ongoing development. △ Less

Submitted 5 April, 2024; v1 submitted 1 February, 2024; originally announced February 2024.

First-Principles Electron-Phonon Interactions and Polarons in the Parent Cuprate La$_2$CuO$_4$

Authors: Benjamin K. Chang, Iurii Timrov, **soo Park, **-Jian Zhou, Nicola Marzari, Marco Bernardi

Abstract: Understanding electronic interactions in high-temperature superconductors is an outstanding challenge. In the widely studied cuprate materials, experimental evidence points to strong electron-phonon ($e$-ph) coupling and broad photoemission spectra. Yet, the microscopic origin of this behavior is not fully understood. Here we study $e$-ph interactions and polarons in a prototypical parent (undoped… ▽ More Understanding electronic interactions in high-temperature superconductors is an outstanding challenge. In the widely studied cuprate materials, experimental evidence points to strong electron-phonon ($e$-ph) coupling and broad photoemission spectra. Yet, the microscopic origin of this behavior is not fully understood. Here we study $e$-ph interactions and polarons in a prototypical parent (undoped) cuprate, La$_2$CuO$_4$ (LCO), by means of first-principles calculations. Leveraging parameter-free Hubbard-corrected density functional theory, we obtain a ground state with band gap and Cu magnetic moment in nearly exact agreement with experiments. This enables a quantitative characterization of $e$-ph interactions. Our calculations reveal two classes of longitudinal optical (LO) phonons with strong $e$-ph coupling to hole states. These modes consist of Cu-O plane bond-stretching and bond-bending as well as vibrations of apical O atoms. The hole spectral functions, obtained with a cumulant method that can capture strong $e$-ph coupling, exhibit broad quasiparticle peaks with a small spectral weight ($Z\approx0.25$) and pronounced LO-phonon sidebands characteristic of polaron effects. Our calculations predict features observed in photoemission spectra, including a 40-meV peak in the $e$-ph coupling distribution function not explained by existing models. These results show that the universal strong $e$-ph coupling found experimentally in lanthanum cuprates is an intrinsic feature of the parent compound, and elucidates its microscopic origin. △ Less

Submitted 20 January, 2024; originally announced January 2024.

Comments: 6 pages, 4 figures

Searching for the thinnest metallic wire

Authors: Chiara Cignarella, Davide Campi, Nicola Marzari

Abstract: One-dimensional materials have gained much attention in the last decades: from carbon nanotubes to ultrathin nanowires, to few-atom atomic chains, these can all display unique electronic properties and great potential for next-generation applications. Exfoliable bulk materials could naturally provide a source for one-dimensional wires with well defined structure and electronics. Here, we explore a… ▽ More One-dimensional materials have gained much attention in the last decades: from carbon nanotubes to ultrathin nanowires, to few-atom atomic chains, these can all display unique electronic properties and great potential for next-generation applications. Exfoliable bulk materials could naturally provide a source for one-dimensional wires with well defined structure and electronics. Here, we explore a database of one-dimensional materials that could be exfoliated from experimentally known three-dimensional Van-der-Waals compounds, searching metallic wires that are resilient to Peierls distortions and could act as vias or interconnects for future downscaled electronic devices. As the one-dimensional nature makes these wires particularly susceptible to dynamical instabilities, we carefully characterise vibrational properties to identify stable phases and characterize electronic and dynamical properties. Our search identifies several novel and stable wires; notably, we identify what could be the thinnest possible exfoliable metallic wire, CuC$_2$, coming a step closer to the ultimate limit in materials downscaling. △ Less

Submitted 16 February, 2024; v1 submitted 28 December, 2023; originally announced December 2023.

Orbital-resolved DFT+U for molecules and solids

Authors: Eric Macke, Iurii Timrov, Nicola Marzari, Lucio Colombi Ciacchi

Abstract: We present an orbital-resolved extension of the Hubbard $U$ correction to density-functional theory (DFT). Compared to the conventional shell-averaged approach, the prediction of energetic, electronic and structural properties is strongly improved, particularly for compounds characterized by both localized and hybridized states in the Hubbard manifold. The numerical values of all Hubbard parameter… ▽ More We present an orbital-resolved extension of the Hubbard $U$ correction to density-functional theory (DFT). Compared to the conventional shell-averaged approach, the prediction of energetic, electronic and structural properties is strongly improved, particularly for compounds characterized by both localized and hybridized states in the Hubbard manifold. The numerical values of all Hubbard parameters are readily obtained from linear-response calculations. The relevance of this more refined approach is showcased by its application to bulk solids pyrite (FeS$_2$) and pyrolusite ($β$-MnO$_2$), as well as to six Fe(II) molecular complexes. Our findings indicate that a careful definition of Hubbard manifolds is indispensable for extending the applicability of DFT+$U$ beyond its current boundaries. The present orbital-resolved scheme aims to provide a computationally undemanding yet accurate tool for electronic structure calculations of charge-transfer insulators, transition-metal (TM) complexes and other compounds displaying significant orbital hybridization. △ Less

Submitted 21 December, 2023; originally announced December 2023.

The Wannier-Functions Software Ecosystem for Materials Simulations

Authors: Antimo Marrazzo, Sophie Beck, Elena R. Margine, Nicola Marzari, Arash A. Mostofi, Junfeng Qiao, Ivo Souza, Stepan S. Tsirkin, Jonathan R. Yates, Giovanni Pizzi

Abstract: Over the last two decades, following the early developments on maximally-localized Wannier functions, an ecosystem of electronic-structure simulation techniques and software leveraging the Wannier representation has flourished. This environment includes codes to obtain Wannier functions and interfaces with first-principles simulation software, as well as an increasing number of related post-proces… ▽ More Over the last two decades, following the early developments on maximally-localized Wannier functions, an ecosystem of electronic-structure simulation techniques and software leveraging the Wannier representation has flourished. This environment includes codes to obtain Wannier functions and interfaces with first-principles simulation software, as well as an increasing number of related post-processing packages. Wannier functions can be obtained for isolated or extended systems (both crystalline and disordered), and can be used to understand chemical bonding, to characterize polarization, magnetization, and topology, or as an optimal basis set, providing very accurate interpolations in reciprocal space or large-scale Hamiltonians in real space. In this review, we summarize the current landscape of techniques, materials properties and simulation codes based on Wannier functions that have been made accessible to the research community, and that are now well integrated into what we term a \emph{Wannier-functions software ecosystem}. First we introduce the theory and practicalities of Wannier functions, starting from their broad domains of applicability to advanced minimization methods using alternative approaches beyond maximal localization. Then we define the concept of a Wannier ecosystem and its interactions and interoperability with many quantum engines and post-processing packages. We focus on some of the key properties that are empowered by such ecosystem\textemdash from band interpolations and large-scale simulations to electronic transport, Berryology, topology, electron-phonon couplings, dynamical mean-field theory, embedding, and Koopmans functionals\textemdash concluding with the current status of interoperability and automation. The review aims at highlighting basic theory and concepts behind codes, providing relevant pointers to more in-depth references. △ Less

Submitted 17 December, 2023; originally announced December 2023.

Comments: Review article, 51 pages, 9 figures, references in alphabetical order

Density-functional perturbation theory for one-dimensional systems: implementation and relevance for phonons and electron-phonon interactions

Authors: Norma Rivano, Nicola Marzari, Thibault Sohier

Abstract: The electronic and vibrational properties and electron-phonon couplings of one-dimensional materials will be key to many prospective applications in nanotechnology. Dimensionality strongly affects these properties and has to be correctly accounted for in first-principles calculations. Here we develop and implement a formulation of density-functional and density-functional perturbation theory that… ▽ More The electronic and vibrational properties and electron-phonon couplings of one-dimensional materials will be key to many prospective applications in nanotechnology. Dimensionality strongly affects these properties and has to be correctly accounted for in first-principles calculations. Here we develop and implement a formulation of density-functional and density-functional perturbation theory that is tailored for one-dimensional systems. A key ingredient is the inclusion of a Coulomb cutoff, a reciprocal-space technique designed to correct for the spurious interactions between periodic images in periodic-boundary conditions. This restores the proper one-dimensional open-boundary conditions, letting the true response of the isolated one-dimensional system emerge. In addition to total energies, forces and stress tensors, phonons and electron-phonon interactions are also properly accounted for. We demonstrate the relevance of the present method on a portfolio of realistic systems: BN atomic chains, BN armchair nanotubes, and GaAs nanowires. Notably, we highlight the critical role of the Coulomb cutoff by studying previously inaccessible polar-optical phonons and Frohlich electron-phonon couplings. We also develop and apply analytical models to support the physical insights derived from the calculations and we discuss their consequences on electronic lifetimes. The present work unlocks the possibility to accurately simulate the linear response properties of one-dimensional systems, sheds light on the transition between dimensionalities and paves the way for further studies in several fields, including charge transport, optical coupling and polaritronics. △ Less

Submitted 5 October, 2023; originally announced October 2023.

Comments: 15 pages, 7 figures

Towards a minimal description of dynamical correlation in metals

Authors: Marco Vanzini, Nicola Marzari

Abstract: Dynamical correlations and non-local contributions beyond static mean-field theories are of fundamental importance for describing the electronic structure of correlated metals. Their effects are usually described with many-body approaches and non-local dynamical self-energies. We suggest here a class of simple model self-energies that are a generalization of the static DFT + Hubbard approach. This… ▽ More Dynamical correlations and non-local contributions beyond static mean-field theories are of fundamental importance for describing the electronic structure of correlated metals. Their effects are usually described with many-body approaches and non-local dynamical self-energies. We suggest here a class of simple model self-energies that are a generalization of the static DFT + Hubbard approach. This formulation, for simplicity called DFT+U(ω)+V, provides an intuitive physical picture, a lightweight implementation, and displays very good agreement with experimental data. △ Less

Submitted 21 September, 2023; originally announced September 2023.

On Green's function embedding using sum-over-pole representations

Authors: Andrea Ferretti, Tommaso Chiarotti, Nicola Marzari

Abstract: In Green's function theory, the total energy of an interacting many-electron system can be expressed in a variational form using the Klein or Luttinger-Ward functionals. Green's function theory also naturally addresses the case where the interacting system is embedded into a bath. This latter can then act as a dynamical (i.e., frequency-dependent) potential, providing a more general framework than… ▽ More In Green's function theory, the total energy of an interacting many-electron system can be expressed in a variational form using the Klein or Luttinger-Ward functionals. Green's function theory also naturally addresses the case where the interacting system is embedded into a bath. This latter can then act as a dynamical (i.e., frequency-dependent) potential, providing a more general framework than that of conventional static external potentials. Notably, the Klein functional includes a term of the form $\text{Tr}_ω\text{Ln}\left\{G_0^{-1}G\right\}$, where $\text{Tr}_ω$ is the frequency integration of the trace operator. Here, we show that using a sum-over-pole representation for the Green's functions and the algorithmic-inversion method one can obtain in full generality an explicit analytical expression for $\text{Tr}_ω\text{Ln}\left\{G_0^{-1}G\right\}$. This allows one, e.g., to derive a variational expression for the Klein functional in the presence of an embedding bath, or to provide an explicit expression of the RPA correlation energy in the framework of the optimized effective potential. △ Less

Submitted 20 September, 2023; originally announced September 2023.

Comments: 11 pages, 3 figures

First-principles characterization of thermal conductivity in LaPO4-based alloys

Authors: Anees Pazhedath, Lorenzo Bastonero, Nicola Marzari, Michele Simoncelli

Abstract: Alloys based on lanthanum phosphate (LaPO$_{4}$) are often employed as thermal barrier coatings, due to their low thermal conductivity and structural stability over a wide temperature range. To enhance the thermal-insulation performance of these alloys, it is essential to comprehensively understand the fundamental physics governing their heat conduction. Here, we employ the Wigner formulation of t… ▽ More Alloys based on lanthanum phosphate (LaPO$_{4}$) are often employed as thermal barrier coatings, due to their low thermal conductivity and structural stability over a wide temperature range. To enhance the thermal-insulation performance of these alloys, it is essential to comprehensively understand the fundamental physics governing their heat conduction. Here, we employ the Wigner formulation of thermal transport in conjunction with first-principles calculations to elucidate how the interplay between anharmonicity and compositional disorder determines the thermal properties of La$_{1{-}x}$Gd$_{x}$PO$_{4}$ alloys, and discuss the fundamental physics underlying the emergence and coexistence of particle-like and wave-like heat-transport mechanisms. We also show how the Wigner transport equation describes correctly the thermodynamic limit of a compositionally disordered crystal, while the Boltzmann transport equation does not. Our predictions for microscopic vibrational properties (temperature-dependent Raman spectrum) and for macroscopic thermal conductivity are validated against experiments. Finally, we leverage these findings to devise strategies to optimize the performance of thermal barrier coatings. △ Less

Submitted 1 July, 2024; v1 submitted 19 September, 2023; originally announced September 2023.

Comments: Main text: 11 pages, 9 figures. Appendix: 8 pages, 8 figures

Understanding the role of Hubbard corrections in the rhombohedral phase of BaTiO$_3$

Authors: G. Gebreyesus, Lorenzo Bastonero, Michele Kotiuga, Nicola Marzari, Iurii Timrov

Abstract: We present a first-principles study of the low-temperature rhombohedral phase of BaTiO$_3$ using Hubbard-corrected density-functional theory. By employing density-functional perturbation theory, we compute the onsite Hubbard $U$ for Ti($3d$) states and the intersite Hubbard $V$ between Ti($3d$) and O($2p$) states. We show that applying the onsite Hubbard $U$ correction alone to Ti($3d$) states pro… ▽ More We present a first-principles study of the low-temperature rhombohedral phase of BaTiO$_3$ using Hubbard-corrected density-functional theory. By employing density-functional perturbation theory, we compute the onsite Hubbard $U$ for Ti($3d$) states and the intersite Hubbard $V$ between Ti($3d$) and O($2p$) states. We show that applying the onsite Hubbard $U$ correction alone to Ti($3d$) states proves detrimental, as it suppresses the Ti($3d$)-O($2p$) hybridization and drives the system towards a cubic phase. Conversely, when both onsite $U$ and intersite $V$ are considered, the localized character of the Ti($3d$) states is maintained, while also preserving the Ti($3d$)-O($2p$) hybridization, restoring the rhombohedral phase of BaTiO$_3$. The generalized PBEsol+$U$+$V$ functional yields good agreement with experimental results for the band gap and dielectric constant, while the optimized geometry is slightly less accurate compared to PBEsol. Zone-center phonon frequencies and Raman spectra are found to be significantly influenced by the underlying geometry. PBEsol and PBEsol+$U$+$V$ provide satisfactory agreement with the experimental Raman spectrum when the PBEsol geometry is used, while PBEsol+$U$ Raman spectrum diverges strongly from experimental data highlighting the adverse impact of the $U$ correction alone in BaTiO$_3$. Our findings underscore the promise of the extended Hubbard PBEsol+$U$+$V$ functional with first-principles $U$ and $V$ for the investigation of other ferroelectric perovskites with mixed ionic-covalent interactions. △ Less

Submitted 27 December, 2023; v1 submitted 8 September, 2023; originally announced September 2023.

Journal ref: Phys. Rev. B 108, 235171 (2023)

Automated all-functionals infrared and Raman spectra

Authors: Lorenzo Bastonero, Nicola Marzari

Abstract: Infrared and Raman spectroscopies are ubiquitous techniques employed in many experimental laboratories, thanks to their fast and non-destructive nature able to capture materials' features as spectroscopic fingerprints. Nevertheless, these measurements frequently need theoretical support in order to unambiguously decipher and assign complex spectra. Linear-response theory provides an effective way… ▽ More Infrared and Raman spectroscopies are ubiquitous techniques employed in many experimental laboratories, thanks to their fast and non-destructive nature able to capture materials' features as spectroscopic fingerprints. Nevertheless, these measurements frequently need theoretical support in order to unambiguously decipher and assign complex spectra. Linear-response theory provides an effective way to obtain the higher-order derivatives needed, but its applicability to modern exchange-correlation functionals remains limited. Here, we devise an automated, open-source, user-friendly approach based on ground-state density-functional theory and the electric enthalpy functional to allow seamless calculations of first-principles infrared and Raman spectra. By employing a finite-displacement and finite-field approach, we allow for the use of any functional, as well as an efficient treatment of large low-symmetry structures. Additionally, we propose a simple scheme for efficiently sampling the Brillouin zone with different electric fields. To demonstrate the capabilities of our approach, we provide illustrations using the ferroelectric LiNbO$_3$ crystal as a paradigmatic example. We predict infrared and Raman spectra using various (semi)local, Hubbard corrected, and hybrid functionals. Our results also show how PBE0 and extended Hubbard functionals yield in this case the best match in term of peak positions and intensities, respectively. △ Less

Submitted 8 August, 2023; originally announced August 2023.

Journal ref: npj Computational Materials, 2024

High-throughput screening of Weyl semimetals

Authors: Davide Grassano, Nicola Marzari, Davide Campi

Abstract: Topological Weyl semimetals represent a novel class of non-trivial materials, where band crossings with linear dispersions take place at generic momenta across reciprocal space. These crossings give rise to low-energy properties akin to those of Weyl fermions, and are responsible for several exotic phenomena. Up to this day, only a handful of Weyl semimetals have been discovered, and the search fo… ▽ More Topological Weyl semimetals represent a novel class of non-trivial materials, where band crossings with linear dispersions take place at generic momenta across reciprocal space. These crossings give rise to low-energy properties akin to those of Weyl fermions, and are responsible for several exotic phenomena. Up to this day, only a handful of Weyl semimetals have been discovered, and the search for new ones remains a very active area. The main challenge on the computational side arises from the fact that many of the tools used to identify the topological class of a material do not provide a complete picture in the case of Weyl semimetals. In this work, we propose an alternative and inexpensive, criterion to screen for possible Weyl fermions, based on the analysis of the band structure along high-symmetry directions in the absence of spin-orbit coupling. We test the method by running a high-throughput screening on a set of 5455 inorganic bulk materials and identify 49 possible candidates for topological properties. A further analysis, carried out by identifying and characterizing the crossings in the Brillouin zone, shows us that 3 of these candidates are Weyl semimetals. Interestingly, while these 3 materials underwent other high-throughput screenings, none had revealed their topological behavior before. △ Less

Submitted 4 August, 2023; v1 submitted 3 August, 2023; originally announced August 2023.

Comments: Fixed author order

The rule of four: anomalous stoichiometries of inorganic compounds

Authors: Elena Gazzarrini, Rose K. Cersonsky, Marnik Bercx, Carl S. Adorf, Nicola Marzari

Abstract: Why are materials with specific characteristics more abundant than others? This is a fundamental question in materials science and one that is traditionally difficult to tackle, given the vastness of compositional and configurational space. We highlight here the anomalous abundance of inorganic compounds whose primitive unit cell contains a number of atoms that is a multiple of four. This occurren… ▽ More Why are materials with specific characteristics more abundant than others? This is a fundamental question in materials science and one that is traditionally difficult to tackle, given the vastness of compositional and configurational space. We highlight here the anomalous abundance of inorganic compounds whose primitive unit cell contains a number of atoms that is a multiple of four. This occurrence - named here the 'rule of four' - has to our knowledge not previously been reported or studied. Here, we first highlight the rule's existence, especially notable when restricting oneself to experimentally known compounds, and explore its possible relationship with established descriptors of crystal structures, from symmetries to energies. We then investigate this relative abundance by looking at structural descriptors, both of global (packing configurations) and local (the smooth overlap of atomic positions) nature. Contrary to intuition, the overabundance does not correlate with low-energy or high-symmetry structures; in fact, structures which obey the 'rule of four' are characterized by low symmetries and loosely packed arrangements maximizing the free volume. We are able to correlate this abundance with local structural symmetries, and visualize the results using a hybrid supervised-unsupervised machine learning method. △ Less

Submitted 27 July, 2023; originally announced July 2023.

On-site and inter-site Hubbard corrections in magnetic monolayers: The case of FePS$_3$ and CrI$_3$

Authors: Fatemeh Haddadi, Edward Linscott, Iurii Timrov, Nicola Marzari, Marco Gibertini

Abstract: Hubbard-corrected density-functional theory has proven to be successful in addressing self-interaction errors in 3D magnetic materials. However, the effectiveness of this approach for 2D magnetic materials has not been extensively explored. Here, we use PBEsol+$\textit{U}$ and its extensions PBEsol+$\textit{U}$+$\textit{V}$ to investigate the electronic, structural, and vibrational properties of 2… ▽ More Hubbard-corrected density-functional theory has proven to be successful in addressing self-interaction errors in 3D magnetic materials. However, the effectiveness of this approach for 2D magnetic materials has not been extensively explored. Here, we use PBEsol+$\textit{U}$ and its extensions PBEsol+$\textit{U}$+$\textit{V}$ to investigate the electronic, structural, and vibrational properties of 2D antiferromagnetic FePS$_3$ and ferromagnetic CrI$_3$, and compare the monolayers with their bulk counterparts. Hubbard parameters (on-site $\textit{U}$ and inter-site $\textit{V}$) are computed self-consistently using density-functional perturbation theory, thus avoiding any empirical assumptions. We show that for FePS$_3$ the Hubbard corrections are crucial in obtaining the experimentally observed insulating state with the correct crystal symmetry, providing also vibrational frequencies in good agreement with Raman experiments. For ferromagnetic CrI$_3$, we discuss how a straightforward application of Hubbard corrections worsens the results and introduces a spurious separation between spin-majority and minority conduction bands. Promoting the Hubbard $\textit{U}$ to be a spin-resolved parameter - that is, applying different (first-principles) values to the spin-up and spin-down manifolds - recovers a more physical picture of the electronic bands and delivers the best comparison with experiments. △ Less

Submitted 2 February, 2024; v1 submitted 9 June, 2023; originally announced June 2023.

Journal ref: Phys. Rev. Materials 8, 014007 (2024)

Electronic structure of few-layer black phosphorus from $μ$-ARPES

Authors: Florian Margot, Simone Lisi, Irène Cucchi, Edoardo Cappelli, Andrew Hunter, Ignacio Gutiérrez-Lezama, KeYuan Ma, Fabian von Rohr, Christophe Berthod, Francesco Petocchi, Samuel Poncé, Nicola Marzari, Marco Gibertini, Anna Tamai, Alberto F. Morpurgo, Felix Baumberger

Abstract: Black phosphorus (BP) stands out among two-dimensional (2D) semiconductors because of its high mobility and thickness dependent direct band gap. However, the quasiparticle band structure of ultrathin BP has remained inaccessible to experiment thus far. Here we use a recently developed laser-based micro-focus angle resolved photoemission ($μ$-ARPES) system to establish the electronic structure of 2… ▽ More Black phosphorus (BP) stands out among two-dimensional (2D) semiconductors because of its high mobility and thickness dependent direct band gap. However, the quasiparticle band structure of ultrathin BP has remained inaccessible to experiment thus far. Here we use a recently developed laser-based micro-focus angle resolved photoemission ($μ$-ARPES) system to establish the electronic structure of 2-9 layer BP from experiment. Our measurements unveil ladders of anisotropic, quantized subbands at energies that deviate from the scaling observed in conventional semiconductor quantum wells. We quantify the anisotropy of the effective masses and determine universal tight-binding parameters which provide an accurate description of the electronic structure for all thicknesses. △ Less

Submitted 1 June, 2023; originally announced June 2023.

Comments: Supporting Information available upon request

Journal ref: Nano Lett. 2023, 23 6433-6439

Automated mixing of maximally localized Wannier functions into target manifolds

Authors: Junfeng Qiao, Giovanni Pizzi, Nicola Marzari

Abstract: Maximally localized Wannier functions (MLWFs) are widely used to construct first-principles tight-binding models that accurately reproduce the electronic structure of materials. Recently, robust and automated approaches to generate these MLWFs have emerged, leading to natural sets of atomic-like orbitals that describe both the occupied states and the lowest-lying unoccupied ones (when the latter c… ▽ More Maximally localized Wannier functions (MLWFs) are widely used to construct first-principles tight-binding models that accurately reproduce the electronic structure of materials. Recently, robust and automated approaches to generate these MLWFs have emerged, leading to natural sets of atomic-like orbitals that describe both the occupied states and the lowest-lying unoccupied ones (when the latter can be meaningfully described by bonding/anti-bonding combinations of localized orbitals). For many applications, it is important to instead have MLWFs that describe only certain target manifolds separated in energy between them -- the occupied states, the empty states, or certain groups of bands. Here, we start from the full set of MLWFs describing simultaneously all the target manifolds, and then mix them using a combination of parallel transport and maximal localization to construct orthogonal sets of MLWFs that fully and only span the desired target submanifolds. The algorithm is simple and robust, and it is applied to some paradigmatic but non-trivial cases (the valence and conduction bands of silicon, the top valence band of MoS$_2$, the $3d$ and $t_{2g}$/$e_g$ bands of SrVO$_3$) and to a mid-throughput study of 77 insulators. △ Less

Submitted 1 June, 2023; originally announced June 2023.

Comments: 12 pages, 6 figures

Journal ref: npj Comput Mater 9, 206 (2023)

How to verify the precision of density-functional-theory implementations via reproducible and universal workflows

Authors: Emanuele Bosoni, Louis Beal, Marnik Bercx, Peter Blaha, Stefan Blügel, Jens Bröder, Martin Callsen, Stefaan Cottenier, Augustin Degomme, Vladimir Dikan, Kristjan Eimre, Espen Flage-Larsen, Marco Fornari, Alberto Garcia, Luigi Genovese, Matteo Giantomassi, Sebastiaan P. Huber, Henning Janssen, Georg Kastlunger, Matthias Krack, Georg Kresse, Thomas D. Kühne, Kurt Lejaeghere, Georg K. H. Madsen, Martijn Marsman , et al. (20 additional authors not shown)

Abstract: In the past decades many density-functional theory methods and codes adopting periodic boundary conditions have been developed and are now extensively used in condensed matter physics and materials science research. Only in 2016, however, their precision (i.e., to which extent properties computed with different codes agree among each other) was systematically assessed on elemental crystals: a firs… ▽ More In the past decades many density-functional theory methods and codes adopting periodic boundary conditions have been developed and are now extensively used in condensed matter physics and materials science research. Only in 2016, however, their precision (i.e., to which extent properties computed with different codes agree among each other) was systematically assessed on elemental crystals: a first crucial step to evaluate the reliability of such computations. We discuss here general recommendations for verification studies aiming at further testing precision and transferability of density-functional-theory computational approaches and codes. We illustrate such recommendations using a greatly expanded protocol covering the whole periodic table from Z=1 to 96 and characterizing 10 prototypical cubic compounds for each element: 4 unaries and 6 oxides, spanning a wide range of coordination numbers and oxidation states. The primary outcome is a reference dataset of 960 equations of state cross-checked between two all-electron codes, then used to verify and improve nine pseudopotential-based approaches. Such effort is facilitated by deploying AiiDA common workflows that perform automatic input parameter selection, provide identical input/output interfaces across codes, and ensure full reproducibility. Finally, we discuss the extent to which the current results for total energies can be reused for different goals (e.g., obtaining formation energies). △ Less

Submitted 26 May, 2023; originally announced May 2023.

Comments: Main text: 23 pages, 4 figures. Supplementary: 68 pages. Nature Review Physics 2023

Journal ref: Nat. Rev. Phys. 6, 45 (2024)

Magnetostriction-Driven Muon Localization in an Antiferromagnetic Oxide

Authors: Pietro Bonfà, Ifeanyi John Onuorah, Franz Lang, Iurii Timrov, Lorenzo Monacelli, Chennan Wang, Xiao Sun, Oleg Petracic, Giovanni Pizzi, Nicola Marzari, Stephen J. Blundell, Roberto De Renzi

Abstract: Magnetostriction drives a rhombohedral distortion in the cubic rock salt antiferromagnet MnO at the Néel temperature $T_{N}=118$ K. As an unexpected consequence we show that this distortion acts to localize the site of an implanted muon due to the accompanying redistribution of electron density. This lifts the degeneracy between equivalent sites, resulting in a single observed muon precession freq… ▽ More Magnetostriction drives a rhombohedral distortion in the cubic rock salt antiferromagnet MnO at the Néel temperature $T_{N}=118$ K. As an unexpected consequence we show that this distortion acts to localize the site of an implanted muon due to the accompanying redistribution of electron density. This lifts the degeneracy between equivalent sites, resulting in a single observed muon precession frequency. Above $T_{N}$, the muon instead becomes delocalized around a network of equivalent sites. Our first-principles simulations based on Hubbard-corrected density-functional theory and molecular dynamics are consistent with our experimental data and help to resolve a long-standing puzzle regarding muon data on MnO, as well as having wider applicability to other magnetic oxides. △ Less

Submitted 28 January, 2024; v1 submitted 20 May, 2023; originally announced May 2023.

Comments: 7 pages, 3 figures

Journal ref: Phys. Rev. Lett. 132, 046701 (2024)

An overview of the spin dynamics of antiferromagnetic Mn$_5$Si$_3$

Authors: N. Biniskos, F. J. dos Santos, M. dos Santos Dias, S. Raymond, K. Schmalzl, P. Steffens, J. Persson, N. Marzari, S. Blügel, S. Lounis, T. Brückel

Abstract: The metallic compound Mn$_5$Si$_3$ hosts a series of antiferromagnetic phases which can be controlled by external stimuli such as temperature and magnetic field. In this work, we investigate the spin-excitation spectrum of bulk Mn$_5$Si$_3$ by combining inelastic neutron scattering measurements and density functional theory calculations. We study the evolution of the dynamical response under exter… ▽ More The metallic compound Mn$_5$Si$_3$ hosts a series of antiferromagnetic phases which can be controlled by external stimuli such as temperature and magnetic field. In this work, we investigate the spin-excitation spectrum of bulk Mn$_5$Si$_3$ by combining inelastic neutron scattering measurements and density functional theory calculations. We study the evolution of the dynamical response under external parameters and demonstrate that the spin dynamics of each phase is robust against any combination of temperature and magnetic field. In particular, the high-energy spin dynamics is very characteristic of the different phases consisting of either spin waves or broad fluctuations patterns. △ Less

Submitted 12 July, 2023; v1 submitted 3 May, 2023; originally announced May 2023.

Comments: 5 figures

Journal ref: APL Mater 11, 081103 (2023)

Noncollinear DFT+$U$ and Hubbard parameters with fully-relativistic ultrasoft pseudopotentials

Authors: Luca Binci, Nicola Marzari

Abstract: The magnetic, noncollinear parametrization of Dudarev's DFT+$U$ method is generalized to fully-relativistic ultrasoft pseudopotentials. We present the definition of the DFT+$U$ total energy functional, and the calculation of forces and stresses in the case of orthogonalized atomic orbitals defining the localised Hubbard manifold, where additional contributions arising from the derivative of the in… ▽ More The magnetic, noncollinear parametrization of Dudarev's DFT+$U$ method is generalized to fully-relativistic ultrasoft pseudopotentials. We present the definition of the DFT+$U$ total energy functional, and the calculation of forces and stresses in the case of orthogonalized atomic orbitals defining the localised Hubbard manifold, where additional contributions arising from the derivative of the inverse square root of the overlap matrix appear. We further extend the perturbative calculation of the Hubbard $U$ parameters within density-functional perturbation theory to the noncollinear relativistic case, by exploiting an existing and recently developed theoretical approach that takes advantage of the time-reversal operator to solve a second Sternheimer equation. We validate and apply the new scheme by studying the electronic structure and the thermodynamics of the binary compounds EuX (where X = O, S, Se, Te is a chalcogen atom), as representative simple crystals, and of the pyrochlore Cd$_2$Os$_2$O$_7$, representative of a more structurally complex oxide. △ Less

Submitted 20 April, 2023; originally announced April 2023.

Journal ref: Phys. Rev. B 108, 115157 (2023)

AiiDA-defects: An automated and fully reproducible workflow for the complete characterization of defect chemistry in functional materials

Authors: Sokseiha Muy, Conrad Johnston, Nicola Marzari

Abstract: Functional materials that enable many technological applications in our everyday lives owe their unique properties to defects that are carefully engineered and incorporated into these materials during processing. However, optimizing and characterizing these defects is very challenging in practice, making computational modelling an indispensable complementary tool. We have developed an automated wo… ▽ More Functional materials that enable many technological applications in our everyday lives owe their unique properties to defects that are carefully engineered and incorporated into these materials during processing. However, optimizing and characterizing these defects is very challenging in practice, making computational modelling an indispensable complementary tool. We have developed an automated workflow and code to accelerate these calculations (AiiDA-defects), which utilises the AiiDA framework, a robust open-source high-throughput materials informatics infrastructure that provides workflow automation while simultaneously preserving and storing the full data provenance in a relational database that is queryable and traversable. This paper describes the design and implementation details of AiiDA-defects, the models and algorithms used, and demonstrates its use in an application to fully characterize the defect chemistry of the well known solid-state Li-ion conductors LiZnPS 4 . We anticipate that AiiDA-defects will be useful as a tool for fully automated and reproducible defect calculations, allowing detailed defect chemistry to be obtained in a reliable and high-throughput way, and paving the way toward the generation of defects databases for accelerated materials design and discovery △ Less

Submitted 22 March, 2023; originally announced March 2023.

Projectability disentanglement for accurate and automated electronic-structure Hamiltonians

Authors: Junfeng Qiao, Giovanni Pizzi, Nicola Marzari

Abstract: Maximally-localized Wannier functions (MLWFs) are a powerful and broadly used tool to characterize the electronic structure of materials, from chemical bonding to dielectric response to topological properties. Most generally, one can construct MLWFs that describe isolated band manifolds, e.g. for the valence bands of insulators, or entangled band manifolds, e.g. in metals or describing both the va… ▽ More Maximally-localized Wannier functions (MLWFs) are a powerful and broadly used tool to characterize the electronic structure of materials, from chemical bonding to dielectric response to topological properties. Most generally, one can construct MLWFs that describe isolated band manifolds, e.g. for the valence bands of insulators, or entangled band manifolds, e.g. in metals or describing both the valence and the conduction manifolds in insulators. Obtaining MLWFs that describe a target manifold accurately and with the most compact representation often requires chemical intuition and trial and error, a challenging step even for experienced researchers and a roadblock for automated high-throughput calculations. Here, we present a powerful approach that automatically provides MLWFs spanning the occupied bands and their natural complement for the empty states, resulting in Wannier Hamiltonian models that provide a tight-binding picture of optimized atomic orbitals in crystals. Key to the success of the algorithm is the introduction of a projectability measure for each Bloch state onto atomic orbitals (here, chosen from the pseudopotential projectors) that determines if that state should be kept identically, discarded, or mixed into a disentangling algorithm. We showcase the accuracy of our method by comparing a reference test set of 200 materials against the selected-columns-of-the-density-matrix algorithm, and its reliability by constructing Wannier Hamiltonians for 21737 materials from the Materials Cloud. △ Less

Submitted 4 July, 2023; v1 submitted 12 March, 2023; originally announced March 2023.

Comments: 14 pages, 9 figures

Journal ref: npj Comput Mater 9, 208 (2023)

Crossover from Boltzmann to Wigner thermal transport in thermoelectric skutterudites

Authors: Enrico Di Lucente, Michele Simoncelli, Nicola Marzari

Abstract: Skutterudites are crystals with a cage-like structure that can be augmented with filler atoms ("rattlers"), usually leading to a reduction in thermal conductivity that can be exploited for thermoelectric applications. Here, we leverage the recently introduced Wigner formulation of thermal transport to elucidate the microscopic physics underlying heat conduction in skutterudites, showing that fille… ▽ More Skutterudites are crystals with a cage-like structure that can be augmented with filler atoms ("rattlers"), usually leading to a reduction in thermal conductivity that can be exploited for thermoelectric applications. Here, we leverage the recently introduced Wigner formulation of thermal transport to elucidate the microscopic physics underlying heat conduction in skutterudites, showing that filler atoms can drive a crossover from the Boltzmann to the Wigner regimes of thermal transport, i.e., from particle-like conduction to wave-like tunnelling. At temperatures where the thermoelectric efficiency of skutterudites is largest, wave-like tunneling can become comparable to particle-like propagation. We define a Boltzmann deviation descriptor able to differentiate the two regimes and relate the competition between the two mechanisms to the materials' chemistry, providing a design strategy to select rattlers and identify optimal compositions for thermoelectric applications. △ Less

Submitted 9 October, 2023; v1 submitted 13 March, 2023; originally announced March 2023.

Comments: 6 pages, 3 figures

Journal ref: Phys. Rev. Res., vol. 5, p. 033125, Aug 2023

Energies and spectra of solids from the algorithmic inversion of dynamical Hubbard functionals

Authors: Tommaso Chiarotti, Andrea Ferretti, Nicola Marzari

Abstract: Energy functionals of the Green's function can simultaneously provide spectral and thermodynamic properties of interacting electrons' systems. Though powerful in principle, these formulations need to deal with dynamical (frequency-dependent) quantities, increasing the algorithmic and numerical complexity and limiting applications. We first show that, when representing all frequency-dependent propa… ▽ More Energy functionals of the Green's function can simultaneously provide spectral and thermodynamic properties of interacting electrons' systems. Though powerful in principle, these formulations need to deal with dynamical (frequency-dependent) quantities, increasing the algorithmic and numerical complexity and limiting applications. We first show that, when representing all frequency-dependent propagators as sums over poles, the typical operations of dynamical formulations become closed (i.e., all quantities are expressed as sums over poles) and analytical. Importantly, we map the Dyson equation into a nonlinear eigenvalue problem that can be solved exactly; this is achieved by introducing a fictitious non-interacting system with additional degrees of freedom which shares, upon projection, the same Green's function of the real system. Last, we introduce an approximation to the exchange-correlation part of the Klein functional adopting a localized $GW$ approach; this is a generalization of the static Hubbard extension of density-functional theory with a dynamical screened potential $U(ω)$. We showcase the algorithmic efficiency of the methods, and the physical accuracy of the functional, by computing the spectral, thermodynamic, and vibrational properties of SrVO$_3$, finding results in close agreement with experiments and state-of-the-art methods, at highly reduced computational costs and with a transparent physical interpretation. △ Less

Submitted 26 May, 2024; v1 submitted 23 February, 2023; originally announced February 2023.

koopmans: an open-source package for accurately and efficiently predicting spectral properties with Koopmans functionals

Authors: Edward Linscott, Nicola Colonna, Riccardo De Gennaro, Ngoc Linh Nguyen, Giovanni Borghi, Andrea Ferretti, Ismaila Dabo, Nicola Marzari

Abstract: Over the past decade we have developed Koopmans functionals, a computationally efficient approach for predicting spectral properties with an orbital-density-dependent functional framework. These functionals impose a generalized piecewise linearity condition to the entire electronic manifold, ensuring that orbital energies match the corresponding electron removal/addition energy differences (in con… ▽ More Over the past decade we have developed Koopmans functionals, a computationally efficient approach for predicting spectral properties with an orbital-density-dependent functional framework. These functionals impose a generalized piecewise linearity condition to the entire electronic manifold, ensuring that orbital energies match the corresponding electron removal/addition energy differences (in contrast to semi-local DFT, where a mismatch between the two lies at the heart of the band gap problem and, more generally, the unreliability of Kohn-Sham orbital energies). This strategy has proven to be very powerful, yielding molecular orbital energies and solid-state band structures with comparable accuracy to many-body perturbation theory but at greatly reduced computational cost while preserving a functional formulation. This paper reviews the theory of Koopmans functionals, discusses the algorithms necessary for their implementation, and introduces koopmans, an open-source package that contains all of the code and workflows needed to perform Koopmans functional calculations and obtain reliable spectral properties of molecules and materials. △ Less

Submitted 7 August, 2023; v1 submitted 15 February, 2023; originally announced February 2023.

Comments: 73 pages, 4 figures, 3 tables. Document includes supporting information

Unraveling the effects of inter-site Hubbard interactions in spinel Li-ion cathode materials

Authors: Iurii Timrov, Michele Kotiuga, Nicola Marzari

Abstract: Accurate first-principles predictions of the structural, electronic, magnetic, and electrochemical properties of cathode materials can be key in the design of novel efficient Li-ion batteries. Spinel-type cathode materials Li$_x$Mn$_2$O$_4$ and Li$_x$Mn$_{1.5}$Ni$_{0.5}$O$_4$ are promising candidates for Li-ion battery technologies, but they present serious challenges when it comes to their first-… ▽ More Accurate first-principles predictions of the structural, electronic, magnetic, and electrochemical properties of cathode materials can be key in the design of novel efficient Li-ion batteries. Spinel-type cathode materials Li$_x$Mn$_2$O$_4$ and Li$_x$Mn$_{1.5}$Ni$_{0.5}$O$_4$ are promising candidates for Li-ion battery technologies, but they present serious challenges when it comes to their first-principles modeling. Here, we use density-functional theory with extended Hubbard functionals - DFT+$U$+$V$ with on-site $U$ and inter-site $V$ Hubbard interactions - to study the properties of these transition-metal oxides. The Hubbard parameters are computed from first-principles using density-functional perturbation theory. We show that while $U$ is crucial to obtain the right trends in properties of these materials, $V$ is essential for a quantitative description of the structural and electronic properties, as well as the Li-intercalation voltages. This work paves the way for reliable first-principles studies of other families of cathode materials without relying on empirical fitting or calibration procedures. △ Less

Submitted 29 March, 2023; v1 submitted 26 January, 2023; originally announced January 2023.

Journal ref: Phys. Chem. Chem. Phys. 25, 9061 (2023)

First-principles thermodynamics of CsSnI3

Authors: Lorenzo Monacelli, Nicola Marzari

Abstract: CsSnI3 is a promising eco-friendly solution for energy harvesting technologies. It exists at room temperature in either a black perovskite polymorph or a yellow 1D double-chain, which irreversibly deteriorates in the air. In this work, we unveil the relative thermodynamic stability between the two structures with a first-principles sampling of the CsSnI3 finite-temperature phase diagram, discoveri… ▽ More CsSnI3 is a promising eco-friendly solution for energy harvesting technologies. It exists at room temperature in either a black perovskite polymorph or a yellow 1D double-chain, which irreversibly deteriorates in the air. In this work, we unveil the relative thermodynamic stability between the two structures with a first-principles sampling of the CsSnI3 finite-temperature phase diagram, discovering how it is driven by anomalously large quantum and anharmonic ionic fluctuations. Thanks to a comprehensive treatment of anharmonicity, the simulations deliver a remarkable agreement with known experimental data for the transition temperatures of the orthorhombic, rhombohedral, and cubic perovskite structures and the thermal expansion coefficient. We disclose how the perovskite polymorphs are the ground state above \SI{270}{\kelvin} and discover an abnormal decrease in heat capacity upon heating in the cubic black perovskite. Our results also significantly downplay the Cs+ rattling modes' contribution to mechanical instability. The remarkable agreement with experiments validates our methodology, which can be systematically applied to all metal halides. △ Less

Submitted 24 January, 2023; originally announced January 2023.

Comments: Accepted on Chemistry of Materials

Hybridization driving distortions and multiferroicity in rare-earth nickelates

Authors: Luca Binci, Michele Kotiuga, Iurii Timrov, Nicola Marzari

Abstract: For decades transition-metal oxides have generated a huge interest due to the multitude of physical phenomena they exhibit. In this class of materials, the rare-earth nickelates, $R$NiO$_3$, stand out for their rich phase diagram stemming from complex couplings between the lattice, electronic and magnetic degrees of freedom. Here, we present a first-principles study of the low-temperature phase fo… ▽ More For decades transition-metal oxides have generated a huge interest due to the multitude of physical phenomena they exhibit. In this class of materials, the rare-earth nickelates, $R$NiO$_3$, stand out for their rich phase diagram stemming from complex couplings between the lattice, electronic and magnetic degrees of freedom. Here, we present a first-principles study of the low-temperature phase for two members of the $R$NiO$_3$ series, with $R=$ Pr, Y. We employ density-functional theory with Hubbard corrections accounting not only for the on-site localizing interactions among the Ni--$3d$ electrons ($U$), but also the inter-site hybridization effects between the transition-metals and the ligands ($V$). All the \textit{U} and \textit{V} parameters are calculated from first-principles using density-functional perturbation theory, resulting in a fully \emph{ab initio} methodology. Our simulations show that the inclusion of the inter-site interaction parameters $V$ is necessary to simultaneously capture the features well-established by experimental characterizations of the low-temperature state: insulating character, antiferromagnetism and bond disproportionation. On the contrary, for some magnetic orderings the inclusion of on-site interaction parameters $U$ alone completely suppresses the breathing distortion occurring in the low-temperature phase and produces an erroneous electronic state with a vanishing band gap. In addition -- only when both the \textit{U} and \textit{V} are considered -- we predict a polar phase with a magnetization-dependent electric polarization, supporting very recent experimental observations that suggest a possible occurrence of type-II multiferroicity for these materials. △ Less

Submitted 23 December, 2022; originally announced December 2022.

Journal ref: Physical Review Research 5, 033146 (2023)

Phonon Self-Energy Corrections: To Screen, or Not to Screen

Authors: Jan Berges, Nina Girotto, Tim Wehling, Nicola Marzari, Samuel Poncé

Abstract: First-principles calculations of phonons are often based on the adiabatic approximation and on Brillouin-zone samplings that might not always be sufficient to capture the subtleties of Kohn anomalies. These shortcomings can be addressed through corrections to the phonon self-energy arising from the low-energy electrons. The exact self-energy involves a product of a bare and a screened electron-pho… ▽ More First-principles calculations of phonons are often based on the adiabatic approximation and on Brillouin-zone samplings that might not always be sufficient to capture the subtleties of Kohn anomalies. These shortcomings can be addressed through corrections to the phonon self-energy arising from the low-energy electrons. The exact self-energy involves a product of a bare and a screened electron-phonon vertex [Rev. Mod. Phys. 89, 015003 (2017)]; still, calculations often employ two adiabatically screened vertices, which have been proposed as a reliable approximation for self-energy differences [Phys. Rev. B 82, 165111 (2010)]. We assess the accuracy of both approaches in estimating the phonon spectral functions of model Hamiltonians and the adiabatic low-temperature phonon dispersions of monolayer TaS$_2$ and doped MoS$_2$. We find that the approximate method yields excellent corrections at low computational cost, due to its designed error cancellation to first order, while using a bare vertex could in principle improve these results but is challenging in practice. We offer an alternative strategy based on downfolding to partially screened phonons and interactions [Phys. Rev. B 92, 245108 (2015)]. This is a natural scheme to include electron-electron interactions and tackle phonons in strongly correlated materials and the frequency dependence of the electron-phonon vertex. △ Less

Submitted 18 October, 2023; v1 submitted 22 December, 2022; originally announced December 2022.

Comments: Published version, 26 pages, 12 figures

Journal ref: Phys. Rev. X 13, 041009 (2023)

Fermi energy determination for advanced smearing techniques

Authors: Flaviano José dos Santos, Nicola Marzari

Abstract: Smearing techniques are widely used in first-principles calculations of metallic and magnetic materials, where they improve the accuracy of Brillouin zone sampling and lessen the impact of level-crossing instabilities. Smearing introduces a fictitious electronic temperature that smooths the discontinuities of the integrands; consequently, a corresponding fictitious entropic term arises, and needs… ▽ More Smearing techniques are widely used in first-principles calculations of metallic and magnetic materials, where they improve the accuracy of Brillouin zone sampling and lessen the impact of level-crossing instabilities. Smearing introduces a fictitious electronic temperature that smooths the discontinuities of the integrands; consequently, a corresponding fictitious entropic term arises, and needs to be considered in the total free energy functional. Advanced smearing techniques -- such as Methfessel-Paxton and cold smearing -- have been introduced to guarantee that the system's total free energy remains independent of the smearing temperature at least up to the second order. In doing so, they give rise to non-monotonic occupation functions (and, for Methfessel-Paxton, non-positive definite), which can result in the chemical potential not being uniquely defined. We explore this shortcoming in detail and introduce a numerical protocol utilizing Newton's minimization method that is able to identify the desired Fermi energy. We validate the method by calculating the Fermi energy of $\sim$20,000 materials and comparing it with the results of standard bisection approaches. In passing, we also highlight how traditional approaches, based on Fermi-Dirac or Gaussian smearing, are actually equivalent for all practical purposes, provided the smearing width is appropriately renormalized by a factor $\sim$2.565. △ Less

Submitted 19 June, 2023; v1 submitted 15 December, 2022; originally announced December 2022.

Comments: 8 figures

Journal ref: Phys. Rev. B 107, 195122 (2023)

Testing Koopmans spectral functionals on the analytically-solvable Hooke's atom

Authors: Yannick Schubert, Nicola Marzari, Edward Linscott

Abstract: Koopmans spectral functionals are a class of orbital-density-dependent functionals designed to accurately predict spectroscopic properties. They do so markedly better than their Kohn-Sham density-functional theory counterparts, as demonstrated in earlier works on benchmarks of molecules and bulk systems. This work is a complementary study where -- instead of comparing against real, many-electron s… ▽ More Koopmans spectral functionals are a class of orbital-density-dependent functionals designed to accurately predict spectroscopic properties. They do so markedly better than their Kohn-Sham density-functional theory counterparts, as demonstrated in earlier works on benchmarks of molecules and bulk systems. This work is a complementary study where -- instead of comparing against real, many-electron systems -- we test Koopmans spectral functionals on Hooke's atom, a toy two-electron system that has analytical solutions for particular strengths of its harmonic confining potential. As these calculations clearly illustrate, Koopmans spectral functionals do an excellent job of describing Hooke's atom across a range of confining potential strengths. This work also provides broader insight into the features and capabilities of Koopmans spectral functionals more generally. △ Less

Submitted 20 February, 2023; v1 submitted 12 December, 2022; originally announced December 2022.

Comments: 12 pages, 8 figures, 2 tables

Topological magnons driven by the Dzyaloshinskii-Moriya interaction in the centrosymmetric ferromagnet Mn$_5$Ge$_3$

Authors: M. dos Santos Dias, N. Biniskos, F. J. dos Santos, K. Schmalzl, J. Persson, F. Bourdarot, N. Marzari, S. Blügel, T. Brückel, S. Lounis

Abstract: The phase of the quantum-mechanical wave function can encode a topological structure with wide-ranging physical consequences, such as anomalous transport effects and the existence of edge states robust against perturbations. While this has been exhaustively demonstrated for electrons, properties associated with the elementary quasiparticles in magnetic materials are still underexplored. Here, we s… ▽ More The phase of the quantum-mechanical wave function can encode a topological structure with wide-ranging physical consequences, such as anomalous transport effects and the existence of edge states robust against perturbations. While this has been exhaustively demonstrated for electrons, properties associated with the elementary quasiparticles in magnetic materials are still underexplored. Here, we show theoretically and via inelastic neutron scattering experiments that the bulk ferromagnet Mn$_5$Ge$_3$ hosts gapped topological Dirac magnons. Although inversion symmetry prohibits a net Dzyaloshinskii-Moriya interaction in the unit cell, it is locally allowed and is responsible for the gap opening in the magnon spectrum. This gap is predicted and experimentally verified to close by rotating the magnetization away from the $c$-axis with an applied magnetic field. Hence, Mn$_5$Ge$_3$ realizes a gapped Dirac magnon material in three dimensions. Its tunability by chemical do** or by thin film nanostructuring defines an exciting new platform to explore and design topological magnons. More generally, our experimental route to verify and control the topological character of the magnons is applicable to bulk centrosymmetric hexagonal materials, which calls for systematic investigation. △ Less

Submitted 20 October, 2023; v1 submitted 30 November, 2022; originally announced November 2022.

Comments: 24 pages, 4 figures. Accepted in Nature Communications

Journal ref: Nat Commun 14, 7321 (2023)

Novel materials in the Materials Cloud 2D database

Authors: Davide Campi, Nicolas Mounet, Marco Gibertini, Giovanni Pizzi, Nicola Marzari

Abstract: Two-dimensional (2D) materials are among the most promising candidates for beyond-silicon electronic, optoelectronic and quantum computing applications. Recently, their recognized importance sparked a push to discover and characterize novel 2D materials. Within a few years, the number of experimentally exfoliated or synthesized 2D materials went from a couple of dozens to more than a hundred, with… ▽ More Two-dimensional (2D) materials are among the most promising candidates for beyond-silicon electronic, optoelectronic and quantum computing applications. Recently, their recognized importance sparked a push to discover and characterize novel 2D materials. Within a few years, the number of experimentally exfoliated or synthesized 2D materials went from a couple of dozens to more than a hundred, with the number of theoretically predicted compounds reaching a few thousands. In 2018 we first contributed to this effort with the identification of 1825 compounds that are either easily (1036) or potentially (789) exfoliable from experimentally known 3D compounds. Here, we report on a major expansion of this 2D portfolio thanks to the extension of the screening protocol to an additional experimental database (MPDS) as well as to the updated versions of the two databases (ICSD and COD) used in our previous work. This expansion has led to the discovery of additional 1252 unique monolayers, bringing the total to 3077 compounds and, notably, almost doubling the number of easily exfoliable materials (2004). Moreover, we optimized the structural properties of all these monolayers and explored their electronic structure with a particular emphasis on those rare large-bandgap 2D materials that could be precious to isolate 2D field effect transistors channels. Finally, for each material containing up to 6 atoms per unit cell, we identified the best candidates to form commensurate heterostructures, balancing requirements on the supercells size and minimal strain. △ Less

Submitted 20 October, 2022; originally announced October 2022.

Thermal conductivity of glasses above the plateau: first-principles theory and applications

Authors: Michele Simoncelli, Francesco Mauri, Nicola Marzari

Abstract: Predicting the thermal conductivity of glasses from first principles has hitherto been a prohibitively complex problem. In fact, past works have highlighted challenges in achieving computational convergence with respect to length and/or time scales using either the established Allen-Feldman or Green-Kubo formulations, endorsing the concept that atomistic models containing thousands of atoms -- thu… ▽ More Predicting the thermal conductivity of glasses from first principles has hitherto been a prohibitively complex problem. In fact, past works have highlighted challenges in achieving computational convergence with respect to length and/or time scales using either the established Allen-Feldman or Green-Kubo formulations, endorsing the concept that atomistic models containing thousands of atoms -- thus beyond the capabilities of first-principles calculations -- are needed to describe the thermal conductivity of glasses. In addition, these established formulations either neglect anharmonicity (Allen-Feldman) or miss the Bose-Einstein statistics of atomic vibrations (Green Kubo), thus leaving open the question on the relevance of these effects. Here, we present a first-principles formulation to address the thermal conductivity of glasses above the plateau, which can account comprehensively for the effects of structural disorder, anharmonicity, and quantum Bose-Einstein statistics. The protocol combines the Wigner formulation of thermal transport with convergence-acceleration techniques, and is validated in vitreous silica using both first-principles calculations and a quantum-accurate machine-learned interatomic potential. We show that models of vitreous silica containing less than 200 atoms can already reproduce the thermal conductivity in the macroscopic limit and that anharmonicity negligibly affects heat transport in vitreous silica. We discuss the microscopic quantities that determine the trend of the conductivity at high temperature, highlighting the agreement of the calculations with experiments in the temperature range above the plateau where radiative effects remain negligible (50<T <450 K). △ Less

Submitted 22 September, 2022; originally announced September 2022.

Comments: 24 pages, 13 figures

General invariance and equilibrium conditions for lattice dynamics in 1D, 2D, and 3D materials

Authors: Changpeng Lin, Samuel Poncé, Nicola Marzari

Abstract: The long-wavelength behavior of vibrational modes plays a central role in carrier transport, phonon-assisted optical properties, superconductivity, and thermomechanical and thermoelectric properties of materials. Here, we present general invariance and equilibrium conditions of the lattice potential; these allow to recover the quadratic dispersions of flexural phonons in low-dimensional materials,… ▽ More The long-wavelength behavior of vibrational modes plays a central role in carrier transport, phonon-assisted optical properties, superconductivity, and thermomechanical and thermoelectric properties of materials. Here, we present general invariance and equilibrium conditions of the lattice potential; these allow to recover the quadratic dispersions of flexural phonons in low-dimensional materials, in agreement with the phenomenological model for long-wavelength bending modes. We also prove that for any low-dimensional material the bending modes can have a purely out-of-plane polarization in the vacuum direction and a quadratic dispersion in the long-wavelength limit. In addition, we propose an effective approach to treat invariance conditions in crystals with non-vanishing Born effective charges where the long-range dipole-dipole interactions induce a contribution to the lattice potential and stress tensor. Our approach is successfully applied to the phonon dispersions of 158 two-dimensional materials, highlighting its critical relevance in the study of phonon-mediated properties of low-dimensional materials. △ Less

Submitted 16 November, 2022; v1 submitted 20 September, 2022; originally announced September 2022.

Comments: 14 pages, 7 figures for main text, 52 pages with supplementary information

Journal ref: npj Comput Mater 8, 236 (2022)

The type-I antiferromagnetic Weyl semimetal InMnTi$_2$

Authors: Davide Grassano, Luca Binci, Nicola Marzari

Abstract: Topological materials have been a main focus of studies in the past decade due to their protected properties that can be exploited for the fabrication of new devices. Among them, Weyl semimetals are a class of topological semimetals with non-trivial linear band crossing close to the Fermi level. The existence of such crossings requires the breaking of either time-reversal or inversion symmetry and… ▽ More Topological materials have been a main focus of studies in the past decade due to their protected properties that can be exploited for the fabrication of new devices. Among them, Weyl semimetals are a class of topological semimetals with non-trivial linear band crossing close to the Fermi level. The existence of such crossings requires the breaking of either time-reversal or inversion symmetry and is responsible for the exotic physical properties. In this work we identify the full-Heusler compound InMnTi$_2$, as a promising, easy to synthesize, $T$- and $I$-breaking Weyl semimetal. To correctly capture the nature of the magnetic state, we employed a novel $\mathrm{DFT}+U$ computational setup where all the Hubbard parameters are evaluated from first-principles; thus preserving a genuinely predictive \textit{ab initio} character of the theory. We demonstrate that this material exhibits several features that are comparatively more intriguing with respect to other known Weyl semimetals: the distance between two neighboring nodes is large enough to observe a wide range of linear dispersions in the bands, and only one kind of such node's pairs is present in the Brillouin zone. We also show the presence of Fermi arcs stable across a wide range of chemical potentials. Finally, the lack of contributions from trivial points to the low-energy properties makes the materials a promising candidate for practical devices. △ Less

Submitted 27 October, 2023; v1 submitted 24 August, 2022; originally announced August 2022.

Comments: Improved method description and bibliography

Infrared-active phonons in one-dimensional materials and their spectroscopic signatures

Authors: Norma Rivano, Nicola Marzari, Thibault Sohier

Abstract: Dimensionality provides a clear fingerprint on the dispersion of infrared-active, polar-optical phonons. For these phonons, the local dipoles parametrized by the Born effective charges drive the LO-TO splitting of bulk materials; this splitting actually breaks down in two-dimensional materials. Here, we extend the existing theory to the one-dimensional (1D) case. Combining an analytical model with… ▽ More Dimensionality provides a clear fingerprint on the dispersion of infrared-active, polar-optical phonons. For these phonons, the local dipoles parametrized by the Born effective charges drive the LO-TO splitting of bulk materials; this splitting actually breaks down in two-dimensional materials. Here, we extend the existing theory to the one-dimensional (1D) case. Combining an analytical model with the implementation of density-functional perturbation theory in 1D boundary conditions, we show that the dielectric splitting in the dispersion relations collapses logarithmically at the zone center. The dielectric properties and the radius of the 1D materials are linked by the present work to these red shifts, opening novel IR and Raman characterization avenues. △ Less

Submitted 21 August, 2022; originally announced August 2022.

Long-range electrostatic contribution to the electron-phonon couplings and mobilities of two-dimensional and bulk materials

Authors: Samuel Poncé, Miquel Royo, Massimiliano Stengel, Nicola Marzari, Marco Gibertini

Abstract: Charge transport plays a crucial role in manifold potential applications of two-dimensional materials, including field effect transistors, solar cells, and transparent conductors. At most operating temperatures, charge transport is hindered by scattering of carriers by lattice vibrations. Assessing the intrinsic phonon-limited carrier mobility is thus of paramount importance to identify promising… ▽ More Charge transport plays a crucial role in manifold potential applications of two-dimensional materials, including field effect transistors, solar cells, and transparent conductors. At most operating temperatures, charge transport is hindered by scattering of carriers by lattice vibrations. Assessing the intrinsic phonon-limited carrier mobility is thus of paramount importance to identify promising candidates for next-generation devices. Here we provide a framework to efficiently compute the drift and Hall carrier mobility of two-dimensional materials through the Boltzmann transport equation by relying on a Fourier-Wannier interpolation. Building on a recent formulation of long-range contributions to dynamical matrices and phonon dispersions [Phys. Rev. X 11, 041027 (2021)], we extend the approach to electron-phonon coupling including the effect of dynamical dipoles and quadrupoles. We identify an unprecedented contribution associated with the Berry connection that is crucial to preserve the Wannier-gauge covariance of the theory. This contribution is not specific to 2D crystals, but also concerns the 3D case, as we demonstrate via an application to bulk SrO. We showcase our method on a wide selection of relevant monolayers ranging from SnS2 to MoS2, graphene, BN, InSe, and phosphorene. We also discover a non-trivial temperature evolution of the Hall hole mobility in InSe whereby the mobility increases with temperature above 150 K due to the mexican-hat electronic structure of the InSe valence bands. Overall, we find that dynamical quadrupoles are essential and can impact the carrier mobility in excess of 75%. △ Less

Submitted 4 April, 2023; v1 submitted 20 July, 2022; originally announced July 2022.

Comments: 31 pages and 16 figures

Accurate prediction of Hall mobilities in two-dimensional materials through gauge-covariant quadrupolar contributions

Authors: Samuel Poncé, Miquel Royo, Marco Gibertini, Nicola Marzari, Massimiliano Stengel

Abstract: Despite considerable efforts, accurate computations of electron-phonon and carrier transport properties of low-dimensional materials from first principles have remained elusive. By building on recent advances in the description of long-range electrostatics, we develop a general approach to the calculation of electron-phonon couplings in two-dimensional materials. We show that the nonanalytic behav… ▽ More Despite considerable efforts, accurate computations of electron-phonon and carrier transport properties of low-dimensional materials from first principles have remained elusive. By building on recent advances in the description of long-range electrostatics, we develop a general approach to the calculation of electron-phonon couplings in two-dimensional materials. We show that the nonanalytic behavior of the electron-phonon matrix elements depends on the Wannier gauge, but that a missing Berry connection restores invariance to quadrupolar order. We showcase these contributions in a MoS$_2$ monolayer, calculating intrinsic drift and Hall mobilities with precise Wannier interpolations. We also find that the contributions of dynamical quadrupoles to the scattering potential are essential, and that their neglect leads to errors of 23% and 76% in the room temperature electron and hole Hall mobilities, respectively. △ Less

Submitted 4 April, 2023; v1 submitted 20 July, 2022; originally announced July 2022.

Comments: 6 pages and 2 figures

A complementary screening for quantum spin Hall insulators in 2D exfoliable materials

Authors: Davide Grassano, Davide Campi, Antimo Marrazzo, Nicola Marzari

Abstract: Quantum spin Hall insulators are a class of topological materials that has been extensively studied during the past decade. One of their distinctive features is the presence of a finite band gap in the bulk and gapless, topologically protected edge states that are spin-momentum locked. These materials are characterized by a $\mathbb{Z}_2$ topological order where, in the 2D case, a single topologic… ▽ More Quantum spin Hall insulators are a class of topological materials that has been extensively studied during the past decade. One of their distinctive features is the presence of a finite band gap in the bulk and gapless, topologically protected edge states that are spin-momentum locked. These materials are characterized by a $\mathbb{Z}_2$ topological order where, in the 2D case, a single topological invariant can be even or odd for a trivial or a topological material, respectively. Thanks to their interesting properties, such as the realization of dissipationless spin currents, spin pum** and spin filtering, they are of great interest in the field of electronics, spintronics and quantum computing. In this work we perform an high-throughput screening of Quantum spin Hall insulators starting from a set of 783 2D exfoliable materials, recently identified from a systematic screening of the ICSD, COD, and MPDS databases. We find a new $\mathbb{Z}_2$ topological insulator (HgNS) as well as 3 already known ones and 7 direect gap metals that have the potential of becoming Quantum spin Hall insulators under a reasonably weak external perturbation. △ Less

Submitted 15 September, 2023; v1 submitted 5 May, 2022; originally announced May 2022.

Journal ref: Phys. Rev. Materials 7, 094202 (2023)

Accurate electronic properties and intercalation voltages of olivine-type Li-ion cathode materials from extended Hubbard functionals

Authors: Iurii Timrov, Francesco Aquilante, Matteo Cococcioni, Nicola Marzari

Abstract: The design of novel cathode materials for Li-ion batteries would greatly benefit from accurate first-principles predictions of structural, electronic, and magnetic properties as well as intercalation voltages in compounds containing transition-metal elements. For such systems, density-functional theory (DFT) with standard (semi-)local exchange-correlation functionals is of limited use as it often… ▽ More The design of novel cathode materials for Li-ion batteries would greatly benefit from accurate first-principles predictions of structural, electronic, and magnetic properties as well as intercalation voltages in compounds containing transition-metal elements. For such systems, density-functional theory (DFT) with standard (semi-)local exchange-correlation functionals is of limited use as it often fails due to strong self-interaction errors that are especially relevant in the partially filled $d$ shells. Here, we perform a detailed comparative study of the phospho-olivine cathode materials Li$_x$MnPO$_4$, Li$_x$FePO$_4$, and the mixed transition metal Li$_x$Mn$_{1/2}$Fe$_{1/2}$PO$_4$ ($x=0, 1/4, 1/2, 3/4, 1$) using four electronic-structure methods: DFT, DFT+$U$, DFT+$U$+$V$, and HSE06. We show that DFT+$U$+$V$, with onsite $U$ and intersite $V$ Hubbard parameters determined from first principles and self-consistently with respect to the structural parameters by means of density-functional perturbation theory (linear response), provides the most accurate description of the electronic structure of these challenging compounds. In particular, we demonstrate that DFT+$U$+$V$ displays very clearly "digital" changes in oxidation states of the transition-metal ions in all compounds, including the mixed-valence phases occurring at intermediate Li concentrations, leading to voltages in remarkable agreement with experiments. We show that the inclusion of intersite Hubbard interactions is essential for the accurate prediction of thermodynamic quantities, balancing the drive for localization induced by the onsite $U$ with intersite $V$ orbital hybridizations. △ Less

Submitted 2 November, 2022; v1 submitted 29 March, 2022; originally announced March 2022.

Journal ref: PRX Energy 1, 033003 (2022)

HP -- A code for the calculation of Hubbard parameters using density-functional perturbation theory

Authors: Iurii Timrov, Nicola Marzari, Matteo Cococcioni

Abstract: We introduce HP, an implementation of density-functional perturbation theory, designed to compute Hubbard parameters (on-site $U$ and inter-site $V$) in the framework of DFT+$U$ and DFT+$U$+$V$. The code does not require the use of computationally expensive supercells of the traditional linear-response approach; instead, unit cells are used with monochromatic perturbations that significantly reduc… ▽ More We introduce HP, an implementation of density-functional perturbation theory, designed to compute Hubbard parameters (on-site $U$ and inter-site $V$) in the framework of DFT+$U$ and DFT+$U$+$V$. The code does not require the use of computationally expensive supercells of the traditional linear-response approach; instead, unit cells are used with monochromatic perturbations that significantly reduce the computational cost of determining Hubbard parameters. HP is an open-source software distributed under the terms of the GPL as a component of Quantum ESPRESSO. As with other components, HP is optimized to run on a variety of different platforms, from laptops to massively parallel architectures, using native mathematical libraries (LAPACK and FFTW) and a hierarchy of custom parallelization layers built on top of MPI. The effectiveness of the code is showcased by computing Hubbard parameters self-consistently for the phospho-olivine Li$_x$Mn$_{1/2}$Fe$_{1/2}$PO$_4$ ($x=0, 1/2, 1$) and by highlighting the accuracy of predictions of the geometry and Li intercalation voltages. △ Less

Submitted 8 July, 2022; v1 submitted 29 March, 2022; originally announced March 2022.

Journal ref: Comput. Phys. Commun. 279, 108455 (2022)

Effective calculation of the Green's function in the time domain on near-term quantum processors

Authors: Francesco Libbi, Jacopo Rizzo, Francesco Tacchino, Nicola Marzari, Ivano Tavernelli

Abstract: We propose an improved quantum algorithm to calculate the Green's function through real-time propagation, and use it to compute the retarded Green's function for the 2-, 3- and 4-site Hubbard models. This novel protocol significantly reduces the number of controlled operations when compared to those previously suggested in literature. Such reduction is quite remarkable when considering the 2-site… ▽ More We propose an improved quantum algorithm to calculate the Green's function through real-time propagation, and use it to compute the retarded Green's function for the 2-, 3- and 4-site Hubbard models. This novel protocol significantly reduces the number of controlled operations when compared to those previously suggested in literature. Such reduction is quite remarkable when considering the 2-site Hubbard model, for which we show that it is possible to obtain the exact time propagation of the $|N\pm 1\rangle$ states by exponentiating one single Pauli component of the Hamiltonian, allowing us to perform the calculations on an actual superconducting quantum processor. △ Less

Submitted 23 March, 2022; originally announced March 2022.

Journal ref: Phys. Rev. Research 4, 043038 (2022)

Koopmans spectral functionals in periodic-boundary conditions

Authors: Nicola Colonna, Riccardo De Gennaro, Edward Linscott, Nicola Marzari

Abstract: Koopmans spectral functionals aim to describe simultaneously ground state properties and charged excitations of atoms, molecules, nanostructures and periodic crystals. This is achieved by augmenting standard density functionals with simple but physically motivated orbital-density-dependent corrections. These corrections act on a set of localized orbitals that, in periodic systems, resemble maximal… ▽ More Koopmans spectral functionals aim to describe simultaneously ground state properties and charged excitations of atoms, molecules, nanostructures and periodic crystals. This is achieved by augmenting standard density functionals with simple but physically motivated orbital-density-dependent corrections. These corrections act on a set of localized orbitals that, in periodic systems, resemble maximally localized Wannier functions. At variance with the original, direct supercell implementation [Phys. Rev. X 8, 021051 (2018)], we discuss here i) the complex but efficient formalism required for a periodic-boundary code using explicit Brillouin zone sampling, and ii) the calculation of the screened Koopmans corrections with density-functional perturbation theory. In addition to delivering improved scaling with system size, the present development makes the calculation of band structures with Koopmans functionals straightforward. The implementation in the open-source Quantum ESPRESSO distribution and the application to prototypical insulating and semiconducting systems are presented and discussed. △ Less

Submitted 22 July, 2022; v1 submitted 16 February, 2022; originally announced February 2022.