Showing 1–8 of 8 results for author: Maruyama, B

Strong Fiber from Uniaxial Fullerene Supramolecules Aligned with Carbon Nanotubes

Authors: John Bulmer, Michelle Durán-Chaves, Daniel M. Long, Jeremiah Lipp, Steven Williams, Mitchell Trafford, Anthony Pelton, Jared Shank, Benji Maruyama, Larry Drummy, Matteo Pasquali, Hilmar Koerner, Timothy Haugan

Abstract: Carbon nanotube (CNT) wires approach copper's specific conductivity and surpass carbon fiber's strength, with further improvement anticipated with greater aspect ratios and incorporation of dopants with long-range structural order. Fullerenes assemble into multitudes of process-dependent supramolecular crystals and, while initially insulating, they become marginally conductive (up to 0.05 MSm… ▽ More Carbon nanotube (CNT) wires approach copper's specific conductivity and surpass carbon fiber's strength, with further improvement anticipated with greater aspect ratios and incorporation of dopants with long-range structural order. Fullerenes assemble into multitudes of process-dependent supramolecular crystals and, while initially insulating, they become marginally conductive (up to 0.05 MSm$^{-1}$) and superconductive ($T_c=18^\circ$K with K and 28$^\circ$K with Rb) after do**. These were small (100's $μ$m long), soft (hardness comparable to indium), and typically unaligned, which hindered development of fullerene based wires. Individual fullerenes were previously incorporated into CNT fibers, although randomly without self-assembly into supramolecules. Here, a simple variation in established CNT acid extrusion creates a fiber composed of uniaxial chains of aligned fullerene supramolecules, self-assembled between aligned few-walled CNT bundles. This will provide a testbed for novel fullerene wire transport and prospects in CNT wire advancement. △ Less

Submitted 20 February, 2023; originally announced February 2023.

Active Learning of Piecewise Gaussian Process Surrogates

Authors: Chiwoo Park, Robert Waelder, Bonggwon Kang, Benji Maruyama, Soondo Hong, Robert Gramacy

Abstract: Active learning of Gaussian process (GP) surrogates has been useful for optimizing experimental designs for physical/computer simulation experiments, and for steering data acquisition schemes in machine learning. In this paper, we develop a method for active learning of piecewise, Jump GP surrogates. Jump GPs are continuous within, but discontinuous across, regions of a design space, as required f… ▽ More Active learning of Gaussian process (GP) surrogates has been useful for optimizing experimental designs for physical/computer simulation experiments, and for steering data acquisition schemes in machine learning. In this paper, we develop a method for active learning of piecewise, Jump GP surrogates. Jump GPs are continuous within, but discontinuous across, regions of a design space, as required for applications spanning autonomous materials design, configuration of smart factory systems, and many others. Although our active learning heuristics are appropriated from strategies originally designed for ordinary GPs, we demonstrate that additionally accounting for model bias, as opposed to the usual model uncertainty, is essential in the Jump GP context. Toward that end, we develop an estimator for bias and variance of Jump GP models. Illustrations, and evidence of the advantage of our proposed methods, are provided on a suite of synthetic benchmarks, and real-simulation experiments of varying complexity. △ Less

Submitted 20 January, 2023; originally announced January 2023.

Comments: The main algorithm of this work is protected by a provisional patent pending with application number 63/386,823

MSC Class: 62G08 ACM Class: I.5.1

Benchmarking the Performance of Bayesian Optimization across Multiple Experimental Materials Science Domains

Authors: Qiaohao Liang, Aldair E. Gongora, Zekun Ren, Armi Tiihonen, Zhe Liu, Shi**g Sun, James R. Deneault, Daniil Bash, Flore Mekki-Berrada, Saif A. Khan, Kedar Hippalgaonkar, Benji Maruyama, Keith A. Brown, John Fisher III, Tonio Buonassisi

Abstract: In the field of machine learning (ML) for materials optimization, active learning algorithms, such as Bayesian Optimization (BO), have been leveraged for guiding autonomous and high-throughput experimentation systems. However, very few studies have evaluated the efficiency of BO as a general optimization algorithm across a broad range of experimental materials science domains. In this work, we eva… ▽ More In the field of machine learning (ML) for materials optimization, active learning algorithms, such as Bayesian Optimization (BO), have been leveraged for guiding autonomous and high-throughput experimentation systems. However, very few studies have evaluated the efficiency of BO as a general optimization algorithm across a broad range of experimental materials science domains. In this work, we evaluate the performance of BO algorithms with a collection of surrogate model and acquisition function pairs across five diverse experimental materials systems, namely carbon nanotube polymer blends, silver nanoparticles, lead-halide perovskites, as well as additively manufactured polymer structures and shapes. By defining acceleration and enhancement metrics for general materials optimization objectives, we find that for surrogate model selection, Gaussian Process (GP) with anisotropic kernels (automatic relevance detection, ARD) and Random Forests (RF) have comparable performance and both outperform the commonly used GP without ARD. We discuss the implicit distributional assumptions of RF and GP, and the benefits of using GP with anisotropic kernels in detail. We provide practical insights for experimentalists on surrogate model selection of BO during materials optimization campaigns. △ Less

Submitted 23 May, 2021; originally announced June 2021.

Gaussian process surrogate modeling with manipulating factors for carbon nanotube growth experiments

Authors: Chiwoo Park, Rahul Rao, Pavel Nikolaev, Benji Maruyama

Abstract: This paper presents a new Gaussian process (GP) surrogate modeling for predicting the outcome of a physical experiment where some experimental inputs are controlled by other manipulating factors. Particularly, we are interested in the case where the control precision is not very high, so the input factor values vary significantly even under the same setting of the corresponding manipulating factor… ▽ More This paper presents a new Gaussian process (GP) surrogate modeling for predicting the outcome of a physical experiment where some experimental inputs are controlled by other manipulating factors. Particularly, we are interested in the case where the control precision is not very high, so the input factor values vary significantly even under the same setting of the corresponding manipulating factors. The case is observed in our main application to carbon nanotube growth experiments, where one experimental input among many is manipulated by another manipulating factors, and the relation between the input and the manipulating factors significantly varies in the dates and times of operations. Due to this variation, the standard GP surrogate that directly relates the manipulating factors to the experimental outcome does not provide a great predictive power on the outcome. At the same time, the GP model relating the main factors to the outcome directly is not appropriate for the prediction purpose because the main factors cannot be accurately set as planned for a future experiment. Motivated by the carbon nanotube example, we propose a two-tiered GP model, where the bottom tier relates the manipulating factors to the corresponding main factors with potential biases and variation independent of the manipulating factors, and the top tier relates the main factors to the experimental outcome. Our two-tier model explicitly models the propagation of the control uncertainty to the experimental outcome through the two GP modeling tiers. We present the inference and hyper-parameter estimation of the proposed model. The proposed approach is illustrated with the motivating example of a closed-loop autonomous research system for carbon nanotube growth experiments, and the test results are reported with the comparison to a benchmark method, i.e. a standard GP model. △ Less

Submitted 9 May, 2020; v1 submitted 3 November, 2019; originally announced November 2019.

Comments: Keywords: Surrogate Modeling, Input Uncertainty, Control Uncertainty, Gaussian Process

Spectroscopic Evaluation of Charge-transfer Do** and Strain in Graphene/MoS2 Heterostructures

Authors: Rahul Rao, Ahmad E. Islam, Simranjeet Singh, Rajiv Berry, Roland K Kawakami, Benji Maruyama, Jyoti Katoch

Abstract: It is important to study the van der Waals interface in emerging vertical heterostructures based on layered two-dimensional (2D) materials. Being atomically thin, 2D materials are susceptible to significant strains as well as charge transfer do** across the interfaces. Here we use Raman and photoluminescence (PL) spectroscopy to study the interface between monolayer graphene/MoS2 heterostructure… ▽ More It is important to study the van der Waals interface in emerging vertical heterostructures based on layered two-dimensional (2D) materials. Being atomically thin, 2D materials are susceptible to significant strains as well as charge transfer do** across the interfaces. Here we use Raman and photoluminescence (PL) spectroscopy to study the interface between monolayer graphene/MoS2 heterostructures prepared by mechanical exfoliation and layer-by-layer transfer. By using correlation analysis between the Raman modes of graphene and MoS2 we show that both layers are subjected to compressive strain and charge transfer do** following mechanical exfoliation and thermal annealing. Furthermore, we show that both strain and carrier concentration can be modulated in the heterostructures with additional thermal annealing. Our study highlights the importance of considering both mechanical and electronic coupling when characterizing the interface in van der Waals heterostructures, and demonstrates a method to tune their electromechanical properties. △ Less

Submitted 10 May, 2019; v1 submitted 2 May, 2019; originally announced May 2019.

Comments: 5 Figures, 1 table

Journal ref: Phys. Rev. B 99, 195401, 2019

Sequential Adaptive Design for Jump Regression Estimation

Authors: Chiwoo Park, Peihua Qiu, Jennifer Carpena-Núñez, Rahul Rao, Michael Susner, Benji Maruyama

Abstract: Selecting input variables or design points for statistical models has been of great interest in adaptive design and active learning. Motivated by two scientific examples, this paper presents a strategy of selecting the design points for a regression model when the underlying regression function is discontinuous. The first example we undertook was for the purpose of accelerating imaging speed in a… ▽ More Selecting input variables or design points for statistical models has been of great interest in adaptive design and active learning. Motivated by two scientific examples, this paper presents a strategy of selecting the design points for a regression model when the underlying regression function is discontinuous. The first example we undertook was for the purpose of accelerating imaging speed in a high resolution material imaging; the second was use of sequential design for the purpose of map** a chemical phase diagram. In both examples, the underlying regression functions have discontinuities, so many of the existing design optimization approaches cannot be applied because they mostly assume a continuous regression function. Although some existing adaptive design strategies developed from treed regression models can handle the discontinuities, the Bayesian approaches come with computationally expensive Markov Chain Monte Carlo techniques for posterior inferences and subsequent design point selections, which is not appropriate for the first motivating example that requires computation at least faster than the original imaging speed. In addition, the treed models are based on the domain partitioning that are inefficient when the discontinuities occurs over complex sub-domain boundaries. We propose a simple and effective adaptive design strategy for a regression analysis with discontinuities: some statistical properties with a fixed design will be presented first, and then these properties will be used to propose a new criterion of selecting the design points for the regression analysis. Sequential design with the new criterion will be presented with comprehensive simulated examples, and its application to the two motivating examples will be presented. △ Less

Submitted 10 February, 2021; v1 submitted 2 April, 2019; originally announced April 2019.

Evidence for Adsorbate-Enhanced Field Emission from Carbon Nanotube Fibers

Authors: P. T. Murray, T. C. Back, M. M. Cahay, S. B. Fairchild, B. Maruyama, N. P. Lockwood, M. Pasquali

Abstract: We used residual gas analysis (RGA) to identify the species desorbed during field emission (FE) from a carbon nanotube (CNT) fiber. The RGA data show a sharp threshold for H2 desorption at an external field strength that coincides with a breakpoint in the FE data. A comprehensive model for the gradual transition of FE from adsorbate-enhanced CNTs at low bias to FE from CNTs with reduced H2 adsorba… ▽ More We used residual gas analysis (RGA) to identify the species desorbed during field emission (FE) from a carbon nanotube (CNT) fiber. The RGA data show a sharp threshold for H2 desorption at an external field strength that coincides with a breakpoint in the FE data. A comprehensive model for the gradual transition of FE from adsorbate-enhanced CNTs at low bias to FE from CNTs with reduced H2 adsorbate coverage at high bias is developed which accounts for the gradual desorption of the H2 adsorbates, alignment of the CNTs at the fiber tip, and importance of self-heating effects with applied bias. △ Less

Submitted 27 June, 2013; originally announced June 2013.

Comments: 18 pages 3 figures

Double resonance Raman study of disorder in CVD-grown single-walled carbon nanotubes

Authors: Rahul Rao, Jason Reppert, Xianfeng Zhang, Ramakrishna Podila, Apparao M. Rao, Saikat Talapatra, Benji Maruyama

Abstract: Single-walled carbon nanotubes (SWNTs) with varying degrees of disorder were investigated using multiple-excitation Raman spectroscopy. The lattice disorder was imparted into the nanotubes by the addition of varying amounts of sulfur to the iron catalyst in a thermal chemical vapor deposition process. Changes in the intensities of peaks occurring due to a double resonance Raman process were studie… ▽ More Single-walled carbon nanotubes (SWNTs) with varying degrees of disorder were investigated using multiple-excitation Raman spectroscopy. The lattice disorder was imparted into the nanotubes by the addition of varying amounts of sulfur to the iron catalyst in a thermal chemical vapor deposition process. Changes in the intensities of peaks occurring due to a double resonance Raman process were studied. The intensity of the disorder-induced D band increased with a decrease in the sulfur content. Upon post-synthesis heat treatment, the double resonance process got quenched due to defect healing. The second order G' band and iTOLA bands exhibited a two-peak structure, of which one of the peaks is relatively more sensitive to defects and decreased in intensity with heat treatment. △ Less

Submitted 29 November, 2010; v1 submitted 22 October, 2010; originally announced October 2010.

Comments: 6 figures