-
Nonlinear Behavior of Josephson Traveling Wave Parametric Amplifiers
Authors:
Claudio Guarcello,
Felix Ahrens,
Guerino Avallone,
Carlo Barone,
Matteo Borghesi,
Luca Callegaro,
Giovanni Carapella,
Anna Paola Caricato,
Iacopo Carusotto,
Alessandro Cian,
Alessandro D'Elia,
Daniele Di Gioacchino,
Emanuele Enrico,
Paolo Falferi,
Luca Fasolo,
Marco Faverzani,
Elena Ferri,
Giovanni Filatrella,
Claudio Gatti,
Andrea Giachero,
Damiano Giubertoni,
Veronica Granata,
Angelo Leo,
Danilo Labranca,
Carlo Ligi
, et al. (18 additional authors not shown)
Abstract:
Recent advancements in quantum technologies and advanced detection experiments have underscored the pressing need for the detection of exceedingly weak signals within the microwave frequency spectrum. Addressing this challenge, the Josephson Traveling Wave Parametric Amplifier (JTWPA) has been proposed as a cryogenic front-end amplifier capable of approaching the quantum noise limit while providin…
▽ More
Recent advancements in quantum technologies and advanced detection experiments have underscored the pressing need for the detection of exceedingly weak signals within the microwave frequency spectrum. Addressing this challenge, the Josephson Traveling Wave Parametric Amplifier (JTWPA) has been proposed as a cryogenic front-end amplifier capable of approaching the quantum noise limit while providing a relevant bandwidth. This research is centered on a comprehensive numerical investigation of the JTWPA, without resorting to simplifications regarding the nonlinearity of the essential components. Specifically, this study focuses on a thorough examination of the system, characterized by coupled nonlinear differential equations representing all components of the device. Proper input and output signals at the device's boundaries are considered. The analysis of the output signals undergoing the parametric amplification process involves a detailed exploration of phase-space dynamics and Fourier spectral analysis of the output voltage. This study is conducted while considering the parameters ruling the response of the device under pump and signal excitations. In addition to the expected signal amplification, the findings reveal that the nonlinear nature of the system can give rise to unforeseen phenomena, depending on the system's operational conditions, which include: the generation of pump tone harmonics, modulation of the signal gain, and incommensurate frequency generation-effects that are not easily accommodated by simplistic linearized approaches
△ Less
Submitted 3 March, 2024;
originally announced March 2024.
-
Development of KI-TWPAs for the DARTWARS project
Authors:
Felix Ahrens,
Elena Ferri,
Guerino Avallone,
Carlo Barone,
Matteo Borghesi,
Luca Callegaro,
Giovanni Carapella,
Anna Paola Caricato,
Iacopo Carusotto,
Alessandro Cian,
Alessandro D'Elia,
Daniele Di Gioacchino,
Emanuele Enrico,
Paolo Falferi,
Luca Fasolo,
Marco Faverzani,
Giovanni Filatrella,
Claudio Gatti,
Andrea Giachero,
Damiano Giubertoni,
Veronica Granata,
Claudio Guarcello,
Danilo Labranca,
Angelo Leo,
Carlo Ligi
, et al. (18 additional authors not shown)
Abstract:
Noise at the quantum limit over a broad bandwidth is a fundamental requirement for future cryogenic experiments for neutrino mass measurements, dark matter searches and Cosmic Microwave Background (CMB) measurements as well as for fast high-fidelity read-out of superconducting qubits. In the last years, Josephson Parametric Amplifiers (JPA) have demonstrated noise levels close to the quantum limit…
▽ More
Noise at the quantum limit over a broad bandwidth is a fundamental requirement for future cryogenic experiments for neutrino mass measurements, dark matter searches and Cosmic Microwave Background (CMB) measurements as well as for fast high-fidelity read-out of superconducting qubits. In the last years, Josephson Parametric Amplifiers (JPA) have demonstrated noise levels close to the quantum limit, but due to their narrow bandwidth, only few detectors or qubits per line can be read out in parallel. An alternative and innovative solution is based on superconducting parametric amplification exploiting the travelling-wave concept. Within the DARTWARS (Detector Array Readout with Travelling Wave AmplifieRS) project, we develop Kinetic Inductance Travelling-Wave Parametric Amplifiers (KI-TWPAs) for low temperature detectors and qubit read-out. KI-TWPAs are typically operated in a threewave mixing (3WM) mode and are characterised by a high gain, a high saturation power, a large amplification bandwidth and nearly quantum limited noise performance. The goal of the DARTWARS project is to optimise the KI-TWPA design, explore new materials, and investigate alternative fabrication processes in order to enhance the overall performance of the amplifier. In this contribution we present the advancements made by the DARTWARS collaboration to produce a working prototype of a KI-TWPA, from the fabrication to the characterisation.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
Broadband parametric amplification in DARTWARS
Authors:
Marco Faverzani,
Pietro Campana,
Rodolfo Carobene,
Marco Gobbo,
Felix Ahrens,
Guerino Avallone,
Carlo Barone,
Matteo Borghesi,
Silvia Capelli,
Giovanni Carapella,
Anna Paola Caricato,
Luca Callegaro,
Iacopo Carusotto,
Andrea Celotto,
Alessandro Cian,
Alessandro D'Elia,
Daniele Di Gioacchino,
Emanuele Enrico,
Paolo Falferi,
Luca Fasolo,
Elena Ferri,
Giovanni Filatrella,
Claudio Gatti,
Damiano Giubertoni,
Veronica Granata
, et al. (24 additional authors not shown)
Abstract:
Superconducting parametric amplifiers offer the capability to amplify feeble signals with extremely low levels of added noise, potentially reaching quantum-limited amplification. This characteristic makes them essential components in the realm of high-fidelity quantum computing and serves to propel advancements in the field of quantum sensing. In particular, Traveling-Wave Parametric Amplifiers (T…
▽ More
Superconducting parametric amplifiers offer the capability to amplify feeble signals with extremely low levels of added noise, potentially reaching quantum-limited amplification. This characteristic makes them essential components in the realm of high-fidelity quantum computing and serves to propel advancements in the field of quantum sensing. In particular, Traveling-Wave Parametric Amplifiers (TWPAs) may be especially suitable for practical applications due to their multi-Gigahertz amplification bandwidth, a feature lacking in Josephson Parametric Amplifiers (JPAs), despite the latter being a more established technology. This paper presents recent developments of the DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) project, focusing on the latest prototypes of Kinetic Inductance TWPAs (KITWPAs). The project aims to develop a KITWPA capable of achieving $20\,$ dB of amplification. To enhance the production yield, the first prototypes were fabricated with half the length and expected gain of the final device. In this paper, we present the results of the characterization of one of the half-length prototypes. The measurements revealed an average amplification of approximately $9\,$dB across a $2\,$GHz bandwidth for a KITWPA spanning $17\,$mm in length.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
Characterization of hydrogenated amorphous silicon sensors on polyimide flexible substrate
Authors:
M. Menichelli,
L. Antognini,
S. Aziz,
A. Bashiri,
M. Bizzarri,
L. Calcagnile,
M. Caprai,
D. Caputo,
A. P. Caricato,
R. Catalano,
D. Chilà,
G. A. P. Cirrone,
T. Croci,
G. Cuttone,
G. De Cesare,
S. Dunand,
M. Fabi,
L. Frontini,
C. Grimani,
M. Ionica,
K. Kanxheri,
M. Large,
V. Liberali,
N. Lovecchio,
M. Martino
, et al. (28 additional authors not shown)
Abstract:
Hydrogenated amorphous silicon (a-Si:H) is a material having an intrinsically high radiation hardness that can be deposited on flexible substrates like Polyimide. For these properties a-Si:H can be used for the production of flexible sensors. a-Si:H sensors can be successfully utilized in dosimetry, beam monitoring for particle physics (x-ray, electron, gamma-ray and proton detection) and radiothe…
▽ More
Hydrogenated amorphous silicon (a-Si:H) is a material having an intrinsically high radiation hardness that can be deposited on flexible substrates like Polyimide. For these properties a-Si:H can be used for the production of flexible sensors. a-Si:H sensors can be successfully utilized in dosimetry, beam monitoring for particle physics (x-ray, electron, gamma-ray and proton detection) and radiotherapy, radiation flux measurement for space applications (study of solar energetic particles and stellar events) and neutron flux measurements. In this paper we have studied the dosimetric x-ray response of n-i-p diodes deposited on Polyimide. We measured the linearity of the photocurrent response to x-rays versus dose-rate from which we have extracted the dosimetric x-ray sensitivity at various bias voltages. In particular low bias voltage operation has been studied to assess the high energy efficiency of these kind of sensor. A measurement of stability of x-ray response versus time has been shown. The effect of detectors annealing has been studied. Operation under bending at various bending radii is also shown.
△ Less
Submitted 30 September, 2023;
originally announced October 2023.
-
Bioinspired Materials for Sensor and Clinical Applications: Two Case Studies
Authors:
Eleonora Alfinito,
Mariangela Ciccarese,
Giuseppe Maruccio,
Anna Grazia Monteduro,
Silvia Rizzato
Abstract:
The growing interest in bio-inspired materials is driven by the need for increasingly targeted and efficient devices that also have a low ecological impact. These devices often use specially developed materials (e.g., polymers, aptamers, monoclonal antibodies) capable of carrying out the process of recognizing and capturing a specific target in a similar way to biomaterials of natural origin. In t…
▽ More
The growing interest in bio-inspired materials is driven by the need for increasingly targeted and efficient devices that also have a low ecological impact. These devices often use specially developed materials (e.g., polymers, aptamers, monoclonal antibodies) capable of carrying out the process of recognizing and capturing a specific target in a similar way to biomaterials of natural origin. In this article, we present two case studies, in which the target is a biomolecule of medical interest, in particular, α-thrombin and cytokine IL-6. In these examples, different biomaterials are compared to establish, with a theoretical-computational procedure known as proteotronics, which of them has the greatest potential for use in a biodevice.
△ Less
Submitted 17 March, 2023;
originally announced March 2023.
-
A Hydrogenated amorphous silicon detector for Space Weather Applications
Authors:
Catia Grimani,
Michele Fabi,
Federico Sabbatini,
Mattia Villani,
Lucio Calcagnile,
Anna Paola Caricato,
Roberto Catalano,
Giuseppe Antonio Pablo Cirrone,
Tommaso Croci,
Giacomo Cuttone,
Sylvain Dunand,
Luca Frontini,
Maria Ionica,
Keida Kanxheri,
Matthew Large,
Valentino Liberali,
Maurizio Martino,
Giuseppe Maruccio,
Giovanni Mazza,
Mauro Menichelli,
Anna Grazia Monteduro,
Arianna Morozzi,
Francesco Moscatelli,
Stefania Pallotta,
Daniele Passeri
, et al. (13 additional authors not shown)
Abstract:
The characteristics of a hydrogenated amorphous silicon (a-Si:H) detector are presented here for monitoring in space solar flares and the evolution of large energetic proton events up to hundreds of MeV. The a-Si:H presents an excellent radiation hardness and finds application in harsh radiation environments for medical purposes, for particle beam characterization and in space weather science and…
▽ More
The characteristics of a hydrogenated amorphous silicon (a-Si:H) detector are presented here for monitoring in space solar flares and the evolution of large energetic proton events up to hundreds of MeV. The a-Si:H presents an excellent radiation hardness and finds application in harsh radiation environments for medical purposes, for particle beam characterization and in space weather science and applications. The critical flux detection threshold for solar X rays, soft gamma rays, electrons and protons is discussed in detail.
△ Less
Submitted 1 September, 2023; v1 submitted 1 February, 2023;
originally announced February 2023.
-
Development of thin hydrogenated amorphous silicon detectors on a flexible substrate
Authors:
M. Menichelli,
M. Bizzarri,
L. Calcagnile,
M. Caprai,
A. P. Caricato,
R. Catalano,
G. A. P. Cirrone,
T. Croci,
G. Cuttone,
S. Dunand,
M. Fabi,
L. Frontini,
B. Gianfelici,
C. Grimani,
M. Ionica,
K. Kanxheri,
M. Large,
V. Liberali,
M. Martino,
G. Maruccio,
G. Mazza,
A. G. Monteduro,
A. Morozzi,
F. Moscatelli,
S. Pallotta
, et al. (18 additional authors not shown)
Abstract:
The HASPIDE (Hydrogenated Amorphous Silicon PIxels DEtectors) project aims at the development of thin hydrogenated amorphous silicon (a-Si:H) detectors on flexible substrates (mostly Polyimide) for beam monitoring, neutron detection and space applications. Since a-Si:H is a material with superior radiation hardness, the benefit for the above-mentioned applications can be appreciated mostly in radi…
▽ More
The HASPIDE (Hydrogenated Amorphous Silicon PIxels DEtectors) project aims at the development of thin hydrogenated amorphous silicon (a-Si:H) detectors on flexible substrates (mostly Polyimide) for beam monitoring, neutron detection and space applications. Since a-Si:H is a material with superior radiation hardness, the benefit for the above-mentioned applications can be appreciated mostly in radiation harsh environments. Furthermore, the possibility to deposit this material on flexible substrates like Polyimide (PI), polyethylene naphthalate (PEN) or polyethylene terephthalate (PET) facilitates the usage of these detectors in medical dosimetry, beam flux and beam profile measurements. Particularly interesting is its use when positioned directly on the flange of the vacuum-to-air separation interface in a beam line, as well as other applications where a thin self-standing radiation flux detector is envisaged. In this paper, the HASPIDE project will be described and some preliminary results on PI and glass substrates will be reported.
△ Less
Submitted 30 November, 2022;
originally announced November 2022.
-
Progress in the development of a KITWPA for the DARTWARS project
Authors:
M. Borghesi,
C. Barone,
S. Capelli,
G. Carapella,
A. P. Caricato,
I. Carusotto,
A. Cian,
D. Di Gioacchino,
E. Enrico,
P. Falferi,
L. Fasolo,
M. Faverzani,
E. Ferri,
G. Filatrella,
C. Gatti,
A. Giachero,
D. Giubertoni,
V. Granata,
A. Greco,
C. Guarcello,
D. Labranca,
A. Leo,
C. Ligi,
G. Maccarrone,
F. Mantegazzini
, et al. (16 additional authors not shown)
Abstract:
DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) is a three years project that aims to develop high-performing innovative Traveling Wave Parametric Amplifiers (TWPAs) for low temperature detectors and qubit readout (C-band). The practical development follows two different promising approaches, one based on the Josephson junctions (TWJPA) and the other one based on the kinetic induc…
▽ More
DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) is a three years project that aims to develop high-performing innovative Traveling Wave Parametric Amplifiers (TWPAs) for low temperature detectors and qubit readout (C-band). The practical development follows two different promising approaches, one based on the Josephson junctions (TWJPA) and the other one based on the kinetic inductance of a high-resistivity superconductor (KITWPA). This paper presents the advancements made by the DARTWARS collaboration to produce a first working prototype of a KITWPA.
△ Less
Submitted 27 October, 2022; v1 submitted 22 August, 2022;
originally announced August 2022.
-
Ultra low noise readout with travelling wave parametric amplifiers: the DARTWARS project
Authors:
A. Rettaroli,
C. Barone,
M. Borghesi,
S. Capelli,
G. Carapella,
A. P. Caricato,
I. Carusotto,
A. Cian,
D. Di Gioacchino,
E. Enrico,
P. Falferi,
L. Fasolo,
M. Faverzani,
E. Ferri,
G. Filatrella,
C. Gatti,
A. Giachero,
D. Giubertoni,
V. Granata,
A. Greco,
C. Guarcello,
D. Labranca,
A. Leo,
C. Ligi,
G. Maccarrone
, et al. (16 additional authors not shown)
Abstract:
The DARTWARS project has the goal of develo** high-performing innovative travelling wave parametric amplifiers with high gain, large bandwidth, high saturation power, and nearly quantum-limited noise. The target frequency region for its applications is 5 - 10 GHz, with an expected noise temperature of about 600 mK. The development follows two different approaches, one based on Josephson junction…
▽ More
The DARTWARS project has the goal of develo** high-performing innovative travelling wave parametric amplifiers with high gain, large bandwidth, high saturation power, and nearly quantum-limited noise. The target frequency region for its applications is 5 - 10 GHz, with an expected noise temperature of about 600 mK. The development follows two different approaches, one based on Josephson junctions and one based on kinetic inductance of superconductors. This contribution mainly focuses on the Josephson travelling wave parametric amplifier, presenting its design, preliminary measurements and the test of homogeneity of arrays of Josephson junctions.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
Detector Array Readout with Traveling Wave Amplifiers
Authors:
A. Giachero,
C. Barone,
M. Borghesi,
G. Carapella,
A. P. Caricato,
I. Carusotto,
W. Chang,
A. Cian,
D. Di Gioacchino,
E. Enrico,
P. Falferi,
L. Fasolo,
M. Faverzani,
E. Ferri,
G. Filatrella,
C. Gatti,
D. Giubertoni,
A. Greco,
C. Kutlu,
A. Leo,
C. Ligi,
G. Maccarrone,
B. Margesin,
G. Maruccio,
A. Matlashov
, et al. (13 additional authors not shown)
Abstract:
Noise at the quantum limit over a large bandwidth is a fundamental requirement for future applications operating at millikelvin temperatures, such as the neutrino mass measurement, the next-generation x-ray observatory, the CMB measurement, the dark matter and axion detection, and the rapid high-fidelity readout of superconducting qubits. The read out sensitivity of arrays of microcalorimeter dete…
▽ More
Noise at the quantum limit over a large bandwidth is a fundamental requirement for future applications operating at millikelvin temperatures, such as the neutrino mass measurement, the next-generation x-ray observatory, the CMB measurement, the dark matter and axion detection, and the rapid high-fidelity readout of superconducting qubits. The read out sensitivity of arrays of microcalorimeter detectors, resonant axion-detectors, and qubits, is currently limited by the noise temperature and bandwidth of the cryogenic amplifiers. The DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) project has the goal of develo** high-performing innovative traveling wave parametric amplifiers (TWPAs) with a high gain, a high saturation power, and a quantum-limited or nearly quantum-limited noise. The practical development follows two different promising approaches, one based on the Josephson junctions and the other one based on the kinetic inductance of a high-resistivity superconductor. In this contribution we present the aims of the project, the adopted design solutions and preliminary results from simulations and measurements.
△ Less
Submitted 2 November, 2021;
originally announced November 2021.
-
Detection of ethanol in water by electrical impedance spectroscopy and resonant perturbation method
Authors:
Angelo Leo,
Anna Grazia Monteduro,
Silvia Rizzato,
Angelo Milone,
Giuseppe Maruccio
Abstract:
Development of highly sensitive, portable and low-cost sensors for the evaluation of ethanol content in liquid is particularly important in several process monitoring, from food to pharmaceutical industry. In this respect, here we report on the design, fabrication and performances of two simple electrical devices, namely interdigitated (ID) electrodes and complementary double split ring resonator…
▽ More
Development of highly sensitive, portable and low-cost sensors for the evaluation of ethanol content in liquid is particularly important in several process monitoring, from food to pharmaceutical industry. In this respect, here we report on the design, fabrication and performances of two simple electrical devices, namely interdigitated (ID) electrodes and complementary double split ring resonator (CDSRR), for the detection of ethanol in water though impedance and perturbation resonance methods, respectively. Both sensors resulted to be efficient for detection of low amount of ethanol in water, in particular EIS gives possibility to perform broadband evaluation of ethanol concentration in solution, and the employment of resonant cavities allows to achieve very low limit of detection of 0.2v/v%.
△ Less
Submitted 26 October, 2021;
originally announced October 2021.
-
Gas sensing technologies -- status, trends, perspectives and novel applications
Authors:
Angelo Milone,
Anna Grazia Monteduro,
Silvia Rizzato,
Angelo Leo,
Giuseppe Maruccio
Abstract:
The strong, continuous progresses in gas sensors and electronic noses resulted in improved performance and enabled an increasing range of applications with large impact on modern societies, such as environmental monitoring, food quality control and diagnostics by breath analysis. Here we review this field with special attention to established and emerging approaches as well as the most recent brea…
▽ More
The strong, continuous progresses in gas sensors and electronic noses resulted in improved performance and enabled an increasing range of applications with large impact on modern societies, such as environmental monitoring, food quality control and diagnostics by breath analysis. Here we review this field with special attention to established and emerging approaches as well as the most recent breakthroughs, challenges and perspectives. In particular, we focus on (1) the transduction principles employed in different architectures of gas sensors, analysing their advantages and limitations; (2) the sensing layers including recent trends toward nanostructured, low-dimensional and composite materials; (3) advances in signal processing methodologies, including the recent advent of artificial neural networks. Finally, we conclude with a summary on the latest achievements and trends in terms of applications.
△ Less
Submitted 26 October, 2021;
originally announced October 2021.
-
Testing of planar hydrogenated amorphous silicon sensors with charge selective contacts for the construction of 3D- detectors
Authors:
M. Menichelli,
M. Bizzarri,
M. Boscardin,
M. Caprai,
A. P. Caricato,
G. A. P. Cirrone,
M. Crivellari,
I. Cupparo,
G. Cuttone,
S. Dunand,
L. Fanò,
O. Hammad,
M. Ionica,
K. Kanxheri,
M. Large,
G. Maruccio,
A. G. Monteduro,
A. Morozzi,
F. Moscatelli,
A. Papi,
D. Passeri,
M. Petasecca,
G. Petringa,
G. Quarta,
S. Rizzato
, et al. (7 additional authors not shown)
Abstract:
Hydrogenated Amorphous Silicon (a-Si:H) is a material well known for its intrinsic radiation hardness and is primarily utilized in solar cells as well as for particle detection and dosimetry. Planar p-i-n diode detectors are fabricated entirely by means of intrinsic and doped PECVD of a mixture of Silane (SiH4) and molecular Hydrogen. In order to develop 3D detector geometries using a-Si:H, two op…
▽ More
Hydrogenated Amorphous Silicon (a-Si:H) is a material well known for its intrinsic radiation hardness and is primarily utilized in solar cells as well as for particle detection and dosimetry. Planar p-i-n diode detectors are fabricated entirely by means of intrinsic and doped PECVD of a mixture of Silane (SiH4) and molecular Hydrogen. In order to develop 3D detector geometries using a-Si:H, two options for the junction fabrication have been considered: ion implantation and charge selective contacts through atomic layer deposition. In order to test the functionality of the charge selective contact electrodes, planar detectors have been fabricated utilizing this technique. In this paper, we provide a general overview of the 3D fabrication project followed by the results of leakage current measurements and x-ray dosimetric tests performed on planar diodes containing charge selective contacts to investigate the feasibility of the charge selective contact methodology for integration with the proposed 3D detector architectures.
△ Less
Submitted 3 February, 2022; v1 submitted 30 September, 2021;
originally announced September 2021.
-
Bimodal Approach for Noise Figures of Merit Evaluation in Quantum-Limited Josephson Traveling Wave Parametric Amplifiers
Authors:
L. Fasolo,
C. Barone,
M. Borghesi,
G. Carapella,
A. P. Caricato,
I. Carusotto,
W. Chung,
A. Cian,
D. Di Gioacchino,
E. Enrico,
P. Falferi,
M. Faverzani,
E. Ferri,
G. Filatrella,
C. Gatti,
A. Giachero,
D. Giubertoni,
A. Greco,
C. Kutlu,
A. Leo,
C. Ligi,
P. Livreri,
G. Maccarrone,
B. Margesin,
G. Maruccio
, et al. (15 additional authors not shown)
Abstract:
The advent of ultra-low noise microwave amplifiers revolutionized several research fields demanding quantum-limited technologies. Exploiting a theoretical bimodal description of a linear phase-preserving amplifier, in this contribution we analyze some of the intrinsic properties of a model architecture (i.e., an rf-SQUID based Josephson Traveling Wave Parametric Amplifier) in terms of amplificatio…
▽ More
The advent of ultra-low noise microwave amplifiers revolutionized several research fields demanding quantum-limited technologies. Exploiting a theoretical bimodal description of a linear phase-preserving amplifier, in this contribution we analyze some of the intrinsic properties of a model architecture (i.e., an rf-SQUID based Josephson Traveling Wave Parametric Amplifier) in terms of amplification and noise generation for key case study input states (Fock and coherents). Furthermore, we present an analysis of the output signals generated by the parametric amplification mechanism when thermal noise fluctuations feed the device.
△ Less
Submitted 29 December, 2021; v1 submitted 30 September, 2021;
originally announced September 2021.
-
Femtomolar Biodetection by a Compact Core-Shell 3D Chiral Metamaterial
Authors:
Mariachiara Manoccio,
Marco Esposito,
Elisabetta Primiceri,
Angelo Leo,
Massimo Cuscunà,
Vittorianna Tasco,
Dmitry Zuev,
Yali Sun,
Giuseppe Maruccio,
Giuseppe Gigli,
Adriana Passaseo
Abstract:
Highly sensitive and selective label free devices for real-time identification of specific biomarkers are expected to significantly impact the biosensing field. The ability of plasmonic systems to confine the light in nanometer volume and to manipulate it by tuning the size, shape and material features of the nanostructures, makes these systems promising candidates for biomedical devices. In this…
▽ More
Highly sensitive and selective label free devices for real-time identification of specific biomarkers are expected to significantly impact the biosensing field. The ability of plasmonic systems to confine the light in nanometer volume and to manipulate it by tuning the size, shape and material features of the nanostructures, makes these systems promising candidates for biomedical devices. In this work we demonstrate the engineered sensing capabilities of a compact array of 3D metal dielectric core-shell chiral metamaterial. The intrinsic chirality of the nano-helices makes the system circular polarization dependent and unaffected by the background interferences, allowing to work even in complex environment. The core-shell architecture enhances the sensing properties of the chiral metamaterial on both in the far and near field, offering also a large surface to molecular immobilization. With our system we recorded sensitivity of about 800nm/RIU and FOM= 1276 RIU-1. The sensing abilities of the system is demonstrated with the detection of the of the TAR DNA-binding protein 43 (TDP-43) , a critical biomarker for the screening of neurodegenerative diseases. In particular, the sensor was tested in different environments, such as human serum, with concentrations ranging from 1pM down to 10fM, opening new perspectives for novel diagnostic tools.
△ Less
Submitted 10 February, 2021; v1 submitted 3 February, 2021;
originally announced February 2021.
-
Identification and time-resolved study of YIG spin wave modes in a MW cavity in strong coupling regime
Authors:
Angelo Leo,
Anna Grazia Monteduro,
Silvia Rizzato,
Luigi Martina,
Giuseppe Maruccio
Abstract:
Recently, the hybridization of microwave-frequency cavity modes with collective spin excitations attracted large interest for the implementation of quantum computation protocols, which exploit the transfer of information among these two physical systems. Here, we investigate the interaction among the magnetization precession modes of a small YIG sphere and the MW electromagnetic modes, resonating…
▽ More
Recently, the hybridization of microwave-frequency cavity modes with collective spin excitations attracted large interest for the implementation of quantum computation protocols, which exploit the transfer of information among these two physical systems. Here, we investigate the interaction among the magnetization precession modes of a small YIG sphere and the MW electromagnetic modes, resonating in a tridimensional aluminum cavity. In the strong coupling regime, anti-crossing features were observed in correspondence of various magnetostatic modes, which were excited in a magnetically saturated sample. Time-resolved studies show evidence of Rabi oscillations, demonstrating coherent exchange of energy among photons and magnons modes. To facilitate the analysis of the standing spin-wave patterns, we propose here a new procedure, based on the introduction of a novel functional variable. The resulting easier identification of magnetostatic modes can be exploited to investigate, control and compare many-levels hybrid systems in cavity- and opto-magnonics research.
△ Less
Submitted 11 July, 2019; v1 submitted 4 May, 2019;
originally announced May 2019.
-
An innovative, fast and facile soft-template approach for the fabrication of porous PDMS for oil-water separation
Authors:
A. Turco,
E. Primiceri,
M. Frigione,
G. Maruccio,
C. Malitesta
Abstract:
Oil wastewater and spilled oil caused serious environmental pollution and damage to public health in the last years. Therefore, considerable efforts are made to develop sorbent materials able to separate oil from water with high selectivity and sorption capacity. However most of them are low reusable, with low volume absorption capacity and poor mechanical properties. Moreover, the synthesis is ti…
▽ More
Oil wastewater and spilled oil caused serious environmental pollution and damage to public health in the last years. Therefore, considerable efforts are made to develop sorbent materials able to separate oil from water with high selectivity and sorption capacity. However most of them are low reusable, with low volume absorption capacity and poor mechanical properties. Moreover, the synthesis is time-consuming, complex and expensive limiting its practical application in case of emergency. Here we propose an innovative approach for the fabrication of porous PDMS starting from an inverse water-in-silicone procedure able to selectively collect oil from water in few seconds. The synthesis is dramatically faster than previous approaches, permitting the fabrication of the material in few minutes independently from the dimension of the sponges. The porous material evidenced a higher volume sorption capacity with respect to other materials already proposed for oil sorption from water and excellent mechanical and reusability properties.This innovative fast and simple approach can be successful in case of emergency, as oil spill accidents, permitting in situ fabrication of porous absorbents.
△ Less
Submitted 11 September, 2018;
originally announced September 2018.
-
Performance of the diamond active target prototype for the PADME experiment at the DA$Φ$NE BTF
Authors:
R. Assiro,
A. P. Caricato,
G. Chiodini,
M. Corrado,
M. De Feudis,
C. Di Giulio,
G. Fiore,
L. Foggetta,
M. Martino,
G. Maruccio,
A. G. Monteduro,
F. Oliva,
C. Pinto,
S. Spagnolo
Abstract:
The PADME experiment at the DA$Φ$NE Beam-Test Facility (BTF) is designed to search for the gauge boson of a new $\rm U(1)$ interaction in the process e$^+$e$^-\rightarrowγ$+$\rm A'$, using the intense positron beam hitting a light target. The $\rm A'$, usually referred as dark photon, is assumed to decay into invisible particles of a secluded sector and it can be observed by searching for an anoma…
▽ More
The PADME experiment at the DA$Φ$NE Beam-Test Facility (BTF) is designed to search for the gauge boson of a new $\rm U(1)$ interaction in the process e$^+$e$^-\rightarrowγ$+$\rm A'$, using the intense positron beam hitting a light target. The $\rm A'$, usually referred as dark photon, is assumed to decay into invisible particles of a secluded sector and it can be observed by searching for an anomalous peak in the spectrum of the missing mass measured in events with a single photon in the final state. The measurement requires the determination of the 4-momentum of the recoil photon, performed by a homogeneous, highly segmented BGO crystals calorimeter. A significant improvement of the missing mass resolution is possible using an active target capable to determine the average position of the positron bunch with a resolution of less than 1 mm. This report presents the performance of a real size $\rm (2x2 cm^2)$ PADME active target made of a thin (50 $μ$m) diamond sensor, with graphitic strips produced via laser irradiation on both sides. The measurements are based on data collected in a beam test at the BTF in November 2015.
△ Less
Submitted 20 September, 2017;
originally announced September 2017.
-
Imaging correlated wave functions of few-electron quantum dots: Theory and scanning tunneling spectroscopy experiments
Authors:
Massimo Rontani,
Elisa Molinari,
Giuseppe Maruccio,
Martin Janson,
Andreas Schramm,
Christian Meyer,
Tomohiro Matsui,
Christian Heyn,
Wolfgang Hansen,
Roland Wiesendanger
Abstract:
We show both theoretically and experimentally that scanning tunneling spectroscopy (STS) images of semiconductor quantum dots may display clear signatures of electron-electron correlation. We apply many-body tunneling theory to a realistic model which fully takes into account correlation effects and dot anisotropy. Comparing measured STS images of freestanding InAs quantum dots with those calcul…
▽ More
We show both theoretically and experimentally that scanning tunneling spectroscopy (STS) images of semiconductor quantum dots may display clear signatures of electron-electron correlation. We apply many-body tunneling theory to a realistic model which fully takes into account correlation effects and dot anisotropy. Comparing measured STS images of freestanding InAs quantum dots with those calculated by the full configuration interaction method, we explain the wave function sequence in terms of images of one- and two-electron states. The STS map corresponding to double charging is significantly distorted by electron correlation with respect to the non-interacting case.
△ Less
Submitted 2 August, 2007;
originally announced August 2007.
-
Correlation Effects in Wave Function Map** of Molecular Beam Epitaxy Grown Quantum Dots
Authors:
Giuseppe Maruccio,
Martin Janson,
Andreas Schramm,
Christian Meyer,
Tomohiro Matsui,
Christian Heyn,
Wolfgang Hansen,
Roland Wiesendanger,
Massimo Rontani,
Elisa Molinari
Abstract:
We investigate correlation effects in the regime of a few electrons in uncapped InAs quantum dots by tunneling spectroscopy and wave function (WF) map** at high tunneling currents where electron-electron interactions become relevant. Four clearly resolved states are found, whose approximate symmetries are roughly s and p, in order of increasing energy. Because the major axes of the p-like stat…
▽ More
We investigate correlation effects in the regime of a few electrons in uncapped InAs quantum dots by tunneling spectroscopy and wave function (WF) map** at high tunneling currents where electron-electron interactions become relevant. Four clearly resolved states are found, whose approximate symmetries are roughly s and p, in order of increasing energy. Because the major axes of the p-like states coincide, the WF sequence is inconsistent with the imaging of independent-electron orbitals. The results are explained in terms of many-body tunneling theory, by comparing measured maps with those calculated by taking correlation effects into account.
△ Less
Submitted 31 July, 2007;
originally announced July 2007.
-
Solid state molecular rectifier based on self organized metalloproteins
Authors:
Ross Rinaldi,
Adriana Biasco,
Giuseppe Maruccio,
Roberto Cingolani,
Dario Alliata,
Laura Andolfi,
Paolo Facci,
Francesca De Rienzo,
Rosa Di Felice,
Elisa Molinari
Abstract:
Recently, great attention has been paid to the possibility of implementing hybrid electronic devices exploiting the self-assembling properties of single molecules. Impressive progress has been done in this field by using organic molecules and macromolecules. However, the use of biomolecules is of great interest because of their larger size (few nanometers) and of their intrinsic functional prope…
▽ More
Recently, great attention has been paid to the possibility of implementing hybrid electronic devices exploiting the self-assembling properties of single molecules. Impressive progress has been done in this field by using organic molecules and macromolecules. However, the use of biomolecules is of great interest because of their larger size (few nanometers) and of their intrinsic functional properties. Here, we show that electron-transfer proteins, such as the blue copper protein azurin (Az), can be used to fabricate biomolecular electronic devices exploiting their intrinsic redox properties, self assembly capability and surface charge distribution. The device implementation follows a bottom-up approach in which the self assembled protein layer interconnects nanoscale electrodes fabricated by electron beam lithography, and leads to efficient rectifying behavior at room temperature.
△ Less
Submitted 29 July, 2002;
originally announced July 2002.
