Showing 1–50 of 283 results for author: Martinez, P

Upgrading SPHERE with the second stage AO system SAXO+: non-common path aberrations estimation and correction

Authors: Johan Mazoyer, Charles Goulas, Fabrice Vidal, Isaac Bernardino Dinis, Julien Milli, Michel Tallon, Raphaël Galicher, Oliver Absil, Clémentine Béchet, Anthony Boccaletti, Florian Ferreira, Maud Langlois, Patrice Martinez, Laurent Mugnier, Mamadou N'diaye, Gilles Orban de Xivry, Axel Potier, Isabelle Tallon-Bosc, Arthur Vigan

Abstract: SAXO+ is a planned enhancement of the existing SAXO, the VLT/ SPHERE adaptive optics system, deployed on ESO's Very Large Telescope. This upgrade is designed to significantly enhance the instrument's capacity to detect and analyze young Jupiter-like planets. The pivotal addition in SAXO+ is a second-stage adaptive optics system featuring a dedicated near-infrared pyramid wavefront sensor and a sec… ▽ More SAXO+ is a planned enhancement of the existing SAXO, the VLT/ SPHERE adaptive optics system, deployed on ESO's Very Large Telescope. This upgrade is designed to significantly enhance the instrument's capacity to detect and analyze young Jupiter-like planets. The pivotal addition in SAXO+ is a second-stage adaptive optics system featuring a dedicated near-infrared pyramid wavefront sensor and a second deformable mirror. This secondary stage is strategically integrated to address any residual wavefront errors persisting after the initial correction performed by the current primary AO loop, SAXO. However, several recent studies clearly showed that in good conditions, even in the current system SAXO, non-common path aberrations (NCPAs) are the limiting factor of the final normalized intensity in focal plane, which is the final metric for ground-based high-contrast instruments. This is likely to be even more so the case with the new AO system, with which the AO residuals will be minimized. Several techniques have already been extensively tested on SPHERE in internal source and/or on-sky and will be presented in this paper. However, the use of a new type of sensor for the second stage, a pyramid wavefront sensor, will likely complicate the correction of these aberrations. Using an end-to-end AO simulation tool, we conducted simulations to gauge the effect of measured SPHERE NCPAs in the coronagraphic image on the second loop system and their correction using focal plane wavefront sensing systems. We finally analyzed how the chosen position of SAXO+ in the beam will impact the evolution of the NCPAs in the new instrument. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Comments: 16 pages, 10 figures, submitted to the proceedings of SPIE Astronomical Telescopes + Instrumentation 2024, 13096-357

Robust Pareto Design of GaN HEMTs for Millimeter-Wave Applications

Authors: Rafael Perez Martinez, Stephen Boyd, Srabanti Chowdhury

Abstract: This paper introduces a robust Pareto design approach for selecting Gallium Nitride (GaN) High Electron Mobility Transistors (HEMTs), particularly for power amplifier (PA) and low-noise amplifier (LNA) designs in 5G applications. We consider five key design variables and two settings (PAs and LNAs) where we have multiple objectives. We assess designs based on three critical objectives, evaluating… ▽ More This paper introduces a robust Pareto design approach for selecting Gallium Nitride (GaN) High Electron Mobility Transistors (HEMTs), particularly for power amplifier (PA) and low-noise amplifier (LNA) designs in 5G applications. We consider five key design variables and two settings (PAs and LNAs) where we have multiple objectives. We assess designs based on three critical objectives, evaluating each by its worst-case performance across a range of Gate-Source Voltages ($V_{\text{GS}}$). We conduct simulations across a range of $V_{\text{GS}}$ values to ensure a thorough and robust analysis. For PAs, the optimization goals are to maximize the worst-case modulated average output power ($P_{\text{out,avg}}$) and power-added efficiency ($PAE_{\text{avg}}$) while minimizing the worst-case average junction temperature ($T_{\text{j,avg}}$) under a modulated 64-QAM signal stimulus. In contrast, for LNAs, the focus is on maximizing the worst-case maximum oscillation frequency ($f_{\text{max}}$) and Gain, and minimizing the worst-case minimum noise figure ($NF_{\text{min}}$). We utilize a derivative-free optimization method to effectively identify robust Pareto optimal device designs. This approach enhances our comprehension of the trade-off space, facilitating more informed decision-making. Furthermore, this method is general across different applications. Although it does not guarantee a globally optimal design, we demonstrate its effectiveness in GaN device sizing. The primary advantage of this method is that it enables the attainment of near-optimal or even optimal designs with just a fraction of the simulations required for an exhaustive full-grid search. △ Less

Submitted 25 June, 2024; originally announced June 2024.

Compact Model Parameter Extraction via Derivative-Free Optimization

Authors: Rafael Perez Martinez, Masaya Iwamoto, Kelly Woo, Zhengliang Bian, Roberto Tinti, Stephen Boyd, Srabanti Chowdhury

Abstract: In this paper, we address the problem of compact model parameter extraction to simultaneously extract tens of parameters via derivative-free optimization. Traditionally, parameter extraction is performed manually by dividing the complete set of parameters into smaller subsets, each targeting different operational regions of the device, a process that can take several days or even weeks. Our approa… ▽ More In this paper, we address the problem of compact model parameter extraction to simultaneously extract tens of parameters via derivative-free optimization. Traditionally, parameter extraction is performed manually by dividing the complete set of parameters into smaller subsets, each targeting different operational regions of the device, a process that can take several days or even weeks. Our approach streamlines this process by employing derivative-free optimization to identify a good parameter set that best fits the compact model without performing an exhaustive number of simulations. We further enhance the optimization process to address critical issues in device modeling by carefully choosing a loss function that evaluates model performance consistently across varying magnitudes by focusing on relative errors (as opposed to absolute errors), prioritizing accuracy in key operational regions of the device above a certain threshold, and reducing sensitivity to outliers. Furthermore, we utilize the concept of train-test split to assess the model fit and avoid overfitting. This is done by fitting 80% of the data and testing the model efficacy with the remaining 20%. We demonstrate the effectiveness of our methodology by successfully modeling two semiconductor devices: a diamond Schottky diode and a GaN-on-SiC HEMT, with the latter involving the ASM-HEMT DC model, which requires simultaneously extracting 35 model parameters to fit the model to the measured data. These examples demonstrate the effectiveness of our approach and showcase the practical benefits of derivative-free optimization in device modeling. △ Less

Submitted 24 June, 2024; originally announced June 2024.

$L^p$ asymptotic stability of 1D damped wave equation with nonlinear distributed dam**

Authors: Yacine Chitour, Meryem Kafnemer, Patrick Martinez, Benmiloud Mebkhout

Abstract: In this paper, we study the one-dimensional wave equation with localized nonlinear dam** and Dirichlet boundary conditions, in the $L^p$ framework, with $p\in [1,\infty)$. We start by addressing the well-posedness problem. We prove the existence and the uniqueness of weak and strong solutions for $p\in [1,\infty)$, under suitable assumptions on the dam** function. Then we study the asympto… ▽ More In this paper, we study the one-dimensional wave equation with localized nonlinear dam** and Dirichlet boundary conditions, in the $L^p$ framework, with $p\in [1,\infty)$. We start by addressing the well-posedness problem. We prove the existence and the uniqueness of weak and strong solutions for $p\in [1,\infty)$, under suitable assumptions on the dam** function. Then we study the asymptotic behaviour of the associated energy when $p \in (1,\infty)$, and we provide decay estimates that appear to be almost optimal as compared to a similar problem with boundary dam**. Our study is motivated by earlier works, in particular, \cite{Haraux2009, Chitour-Marx-Prieur-2020}. Our proofs combine arguments from \cite{KMJC2022} (wave equation in the $L^p$ framework with a linear dam**) with a technique of weighted energy estimates (\cite{PM-COCV}) and new integral inequalities when $p>2$, and with convex analysis tools when $p\in (1,2)$. △ Less

Submitted 17 June, 2024; originally announced June 2024.

Energy-based theory of autoresonance in chains of coupled damped-driven generic oscillators

Authors: Ricardo Chacón, Faustino Palmero, Pedro J. Martínez, Somnath Roy

Abstract: An energy-based theory of autoresonance in driven dissipative chains of coupled generic oscillators is discussed on the basis of a variational principle concerning the energy functional. The theory is applied to chains of delayed Duffing-Ueda oscillators and the equations that together govern the autoresonance forces and solutions are derived and solved analytically for generic values of parameter… ▽ More An energy-based theory of autoresonance in driven dissipative chains of coupled generic oscillators is discussed on the basis of a variational principle concerning the energy functional. The theory is applied to chains of delayed Duffing-Ueda oscillators and the equations that together govern the autoresonance forces and solutions are derived and solved analytically for generic values of parameters and initial conditions, including the case of quenched time-delay disorder. Remarkably, the presence of retarded potentials with time-delayed feedback drastically modify the autoresonance scenario preventing the growth of the energy oscillation over specific regions of the parameter space. Additionally, effective harmonic forces with a slowly varying frequency are derived from the exact autoresonant excitations and the effectiveness of the theory is demonstrated at suppressing the chaos induced by homogeneous periodic excitations in such oscillator chains. Numerical experiments confirmed all the theoretical predictions. △ Less

Submitted 9 May, 2024; v1 submitted 7 May, 2024; originally announced May 2024.

Comments: 5 pages, 4 figures

SPHERE RefPlanets: Search for epsilon Eridani b and warm dust

Authors: C. Tschudi, H. M. Schmid, M. Nowak, H. Le Coroller, S. Hunziker, R. G. van Holstein, C. Perrot, D. Mouillet, J. -C. Augereau, A. Bazzon, J. L. Beuzit, A. Boccaletti, M. J. Bonse, G. Chauvin, S. Desidera, K. Dohlen, C. Dominik, N. Engler, M. Feldt, J. H. Girard, R. Gratton, Th. Henning, M. Kasper, P. Kervella, A. -M. Lagrange , et al. (13 additional authors not shown)

Abstract: We carried out very deep VLT/SPHERE imaging polarimetry of the nearby system Eps Eri based on 38.5 hours of integration time with a 600 - 900 nm broadband filter to search for polarized scattered light from a planet or from circumstellar dust using AO, coronagraphy, high precision differential polarimetry, and angular differential imaging. We have improved several data reduction and post-processin… ▽ More We carried out very deep VLT/SPHERE imaging polarimetry of the nearby system Eps Eri based on 38.5 hours of integration time with a 600 - 900 nm broadband filter to search for polarized scattered light from a planet or from circumstellar dust using AO, coronagraphy, high precision differential polarimetry, and angular differential imaging. We have improved several data reduction and post-processing techniques and also developed new ones to further increase the sensitivity of SPHERE/ZIMPOL. The data provide unprecedented contrast limits, but no significant detection of a point source or an extended signal from circumstellar dust. For each observing epoch, we obtained a point source contrast for the polarized intensity between $2\cdot 10^{-8}$ and $4\cdot 10^{-8}$ at the expected separation of the planet Eps Eri b of 1'' near quadrature phase. The polarimetric contrast limits are about six to 50 times better than the intensity limits because polarimetric imaging is much more efficient in speckle suppression. Combining the entire 14-month data set to the search for a planet moving on a Keplerian orbit with the K-Stacker software further improves the contrast limits by a factor of about two, to about $8 \cdot 10^{-9}$ at 1''. This would allow the detection of a planet with a radius of about 2.5 Jupiter radii. The surface brightness contrast limits achieved for the polarized intensity from an extended scattering region are about 15 mag arcsec$^{-2}$ at 1'', or up to 3 mag arcsec$^{-2}$ deeper than previous limits. For Eps Eri, these limits exclude the presence of a narrow dust ring and they constrain the dust properties. This study shows that the polarimetric contrast limits for reflecting planets with SPHERE/ZIMPOL can be improved to a level $<10^{-8}$ simply by collecting more data over many nights and using the K-Stacker software. △ Less

Submitted 30 April, 2024; originally announced April 2024.

Comments: 26 pages, 20 figures, 5 tables. Accepted for publication in A&A

Magnetic X-ray imaging using a single polarization and multimodal-ptychography

Authors: Marisel Di Pietro Martínez, Alexis Wartelle, Nicolas Mille, Stefan Stanescu, Rachid Belkhou, Farid Fettar, Vincent Favre-Nicolin, Guillaume Beutier

Abstract: Polarized X-rays allow for imaging birefringent or dichroic properties of materials with nanometric resolution. To disentangle these properties from the electronic density, either a polarization analyzer or several measurements with different polarizations (typically two, or more) are needed. Here we demonstrate that ptychography can disentangle these from a single-polarization measurement by usin… ▽ More Polarized X-rays allow for imaging birefringent or dichroic properties of materials with nanometric resolution. To disentangle these properties from the electronic density, either a polarization analyzer or several measurements with different polarizations (typically two, or more) are needed. Here we demonstrate that ptychography can disentangle these from a single-polarization measurement by using a multimodal analysis. This new method provides an alternative to obtain polarization-resolved images of a sample when manipulating the incident polarization is not possible nor sufficient. △ Less

Submitted 29 April, 2024; originally announced April 2024.

Comments: 6 pages, 3 figures

Universal resonancelike emergence of chaos in complex networks of damped-driven nonlinear systems

Authors: Ricardo Chacón, Pedro J. Martínez

Abstract: Characterizing the emergence of chaotic dynamics of complex networks is an essential task in nonlinear science with potential important applications in many fields such as neural control engineering, microgrid technologies, and ecological networks. Here, we solve a critical outstanding problem in this multidisciplinary research field: The emergence and persistence of spatio-temporal chaos in compl… ▽ More Characterizing the emergence of chaotic dynamics of complex networks is an essential task in nonlinear science with potential important applications in many fields such as neural control engineering, microgrid technologies, and ecological networks. Here, we solve a critical outstanding problem in this multidisciplinary research field: The emergence and persistence of spatio-temporal chaos in complex networks of damped-driven nonlinear oscillators in the significant weak-coupling regime, while they exhibit regular behavior when uncoupled. By develo** a comprehensive theory with the aid of standard analytical methods, a hierarchy of lower-dimensional effective models, and extensive numerical simulations, we uncover and characterize the basic physical mechanisms concerning both heterogeneity-induced and impulse-induced emergence, enhancement, and suppression of chaos in starlike and scale-free networks of periodically driven, dissipative nonlinear oscillators. △ Less

Submitted 15 April, 2024; originally announced April 2024.

Comments: 11 pages (including supplemental material) with included figures

Diamond surfaces with lateral gradients for systematic optimization of surface chemistry for relaxometry -- A low pressure plasma-based approach

Authors: Yuchen Tian, Ari R. Ortiz Moreno, Mayeul Chipaux, Kaiqi Wu, Felipe P. Perona Martinez, Hoda Shirzad, Thamir Hamoh, Aldona Mzyk, Patrick van Rijn, Romana Schirhagl

Abstract: Diamond is increasingly popular because of its unique material properties. Diamond defects called nitrogen vacancy (NV) centers allow measurements with unprecedented sensitivity. However, to achieve ideal sensing performance NV centers need to be within nanometers from the surface and are thus strongly dependent on the local surface chemistry. Several attempts have been made to compare diamond sur… ▽ More Diamond is increasingly popular because of its unique material properties. Diamond defects called nitrogen vacancy (NV) centers allow measurements with unprecedented sensitivity. However, to achieve ideal sensing performance NV centers need to be within nanometers from the surface and are thus strongly dependent on the local surface chemistry. Several attempts have been made to compare diamond surfaces. However, due to the high price of diamond crystals with shallow NV centers, a limited number of chemical modifications have been studied. Here, we developed a systematic method to investigate a continuity of different local environments with a varying density and nature of surface groups in a single experiment on a single diamond plate. To achieve this goal, we used diamonds with a shallow ensemble of NV centers and introduced a chemical gradient across the surface. More specifically we used air and hydrogen plasma. The gradients were formed by low pressure plasma treatment after masking with a right-angled triangular prism shield. As a result, the surface contained gradually more oxygen/hydrogen towards the open end of the shield. We then performed widefield relaxometry to determine the effect of surface chemistry on the sensing performance. As expected, relaxation times and thus sensing performance indeed varies along the gradient. △ Less

Submitted 18 April, 2024; originally announced April 2024.

Comments: Main text: 18 pages and 9 figures Supplementary materials: 6 pages and 6 figures

Search for Neutrino Emission from GRB 221009A using the KM3NeT ARCA and ORCA detectors

Authors: S. Aiello, A. Albert, M. Alshamsi, S. Alves Garre, A. Ambrosone, F. Ameli, M. Andre, E. Androutsou, M. Anguita, L. Aphecetche, M. Ardid, S. Ardid, H. Atmani, J. Aublin, F. Badaracco, L. Bailly-Salins, Z. Bardačová, B. Baret, A. Bariego-Quintana, S. Basegmez du Pree, Y. Becherini, M. Bendahman, F. Benfenati, M. Benhassi, D. M. Benoit , et al. (251 additional authors not shown)

Abstract: Gamma-ray bursts are promising candidate sources of high-energy astrophysical neutrinos. The recent GRB 221009A event, identified as the brightest gamma-ray burst ever detected, provides a unique opportunity to investigate hadronic emissions involving neutrinos. The KM3NeT undersea neutrino detectors participated in the worldwide follow-up effort triggered by the event, searching for neutrino even… ▽ More Gamma-ray bursts are promising candidate sources of high-energy astrophysical neutrinos. The recent GRB 221009A event, identified as the brightest gamma-ray burst ever detected, provides a unique opportunity to investigate hadronic emissions involving neutrinos. The KM3NeT undersea neutrino detectors participated in the worldwide follow-up effort triggered by the event, searching for neutrino events. In this letter, we summarize subsequent searches, in a wide energy range from MeV up to a few PeVs. No neutrino events are found in any of the searches performed. Upper limits on the neutrino emission associated with GRB 221009A are computed. △ Less

Submitted 30 April, 2024; v1 submitted 8 April, 2024; originally announced April 2024.

Comments: 11 pages, 2 PDF figures. Submitted to JCAP

Evidence for charge mediated coupling in Fe-Ga/PMN-PT composite multiferroic

Authors: M. Tortarolo, D. Goijman, M. A. Barral, S. Di Napoli, A. A. Pérez Martínez, G. Ramírez, A. Sarmiento, J. Gómez, A. Zakharova, S. E. Bayram, F. Stramaglia, C. A. F. Vaz, J. Milano, C. Piamonteze

Abstract: We present an experimental study of the magnetoelectric coupling (MEC) in the Fe-Ga/PMN-PT thin film multiferroic composite by means of x-ray magnetic circular dichroism (XMCD) and ferromagnetic resonance (FMR). Our measurements show evidence for a charge mediated coupling mechanism, suggested by the asymmetric magnetic remanence (M$_{rem}$) behaviour under opposite electric fields ($\pm$ E) and t… ▽ More We present an experimental study of the magnetoelectric coupling (MEC) in the Fe-Ga/PMN-PT thin film multiferroic composite by means of x-ray magnetic circular dichroism (XMCD) and ferromagnetic resonance (FMR). Our measurements show evidence for a charge mediated coupling mechanism, suggested by the asymmetric magnetic remanence (M$_{rem}$) behaviour under opposite electric fields ($\pm$ E) and the asymmetric resonance field (H$_r$) in the FMR measurements. Also, the FMR measurements reveal a perpendicular magnetic anisotropy (PMA), that can be related to an interface charge effect. and it is tunable by E field. Ab initio calculations support the existence of a charge mediated coupling at the Fe-Ga/PMN-PT interface. △ Less

Submitted 5 April, 2024; originally announced April 2024.

Comments: 7 pages, 5 figures, Supplemental Material

Elliptical Halbach magnet and gradient modules for low-field portable MRI

Authors: Fernando Galve, Eduardo Pallás, Teresa Guallart-Naval, Pablo García-Cristóbal, Pablo Martínez, José M. Algarín, José Borreguero, Rubén Bosch, Francisco Juan-Lloris, José M. Benlloch, Joseba Alonso

Abstract: Objective. To develop methods to design the complete magnetic system for a truly portable MRI scanner for neurological and musculoskeletal (MSK) applications, optimized for field homogeneity, field of view (FoV) and gradient performance compared to existing low-weight configurations. Approach. We explore optimal elliptic-bore Halbach configurations based on discrete arrays of permanent magnets. In… ▽ More Objective. To develop methods to design the complete magnetic system for a truly portable MRI scanner for neurological and musculoskeletal (MSK) applications, optimized for field homogeneity, field of view (FoV) and gradient performance compared to existing low-weight configurations. Approach. We explore optimal elliptic-bore Halbach configurations based on discrete arrays of permanent magnets. In this way, we seek to improve the field homogeneity and remove constraints to the extent of the gradient coils typical of Halbach magnets. Specifically, we have optimized a tightly-packed distribution of magnetic Nd$_2$Fe$_14$B cubes with differential evolution algorithms, and a second array of shimming magnets with interior point and differential evolution methods. We have also designed and constructed an elliptical set of gradient coils that extend over the whole magnet length, maximizing the distance between the lobe centers. These are optimized with a target field method minimizing a cost function that considers also heat dissipation. Main result. We have employed the new toolbox to build the main magnet and gradient modules for a portable MRI scanner designed for point-of-care and residential use. The elliptical Halbach bore has semi-axes of 10 & 14 cm and the magnet generates a field of 87 mT homogeneous down to 5,700 ppm (parts per million) in a 20 cm diameter FoV, it weighs 216 kg and has a width of 65 cm and a height of 72 cm. Gradient efficiencies go up to around 0.8 mT/m/A, for a maximum of 12 mT/m with in 0.5 ms with 15 A & 15 V amplifier. The distance between lobes is 28 cm, significantly increased with respect to other Halbach-based scanners. Heat dissipation is around 25 W at maximum power, and gradient deviations from linearity are below 20% in a 20 cm sphere. △ Less

Submitted 12 March, 2024; originally announced March 2024.

Astronomy potential of KM3NeT/ARCA

Authors: S. Aiello, A. Albert, M. Alshamsi, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, E. Androutsou, M. Anguita, L. Aphecetche, M. Ardid, S. Ardid, H. Atmani, J. Aublin, F. Badaracco, L. Bailly-Salins, Z. Bardacová, B. Baret, A. Bariego-Quintana, A. Baruzzi, S. Basegmez du Pree, Y. Becherini, M. Bendahman, F. Benfenati , et al. (253 additional authors not shown)

Abstract: The KM3NeT/ARCA neutrino detector is currently under construction at 3500 m depth offshore Capo Passero, Sicily, in the Mediterranean Sea. The main science objectives are the detection of high-energy cosmic neutrinos and the discovery of their sources. Simulations were conducted for the full KM3NeT/ARCA detector, instrumenting a volume of 1 km$^3$, to estimate the sensitivity and discovery potenti… ▽ More The KM3NeT/ARCA neutrino detector is currently under construction at 3500 m depth offshore Capo Passero, Sicily, in the Mediterranean Sea. The main science objectives are the detection of high-energy cosmic neutrinos and the discovery of their sources. Simulations were conducted for the full KM3NeT/ARCA detector, instrumenting a volume of 1 km$^3$, to estimate the sensitivity and discovery potential to point-like neutrino sources and an all-sky diffuse neutrino flux. This paper covers the reconstruction of track- and shower-like signatures, as well as the criteria employed for neutrino event selection. By leveraging both the track and shower observation channels, the KM3NeT/ARCA detector demonstrates the capability to detect the diffuse astrophysical neutrino flux within half a year of operation, achieving a 5$σ$ statistical significance. With an angular resolution below 0.1$^\circ$ for tracks and under 2$^\circ$ for showers, the sensitivity to point-like neutrino sources surpasses existing observed limits across the entire sky. △ Less

Submitted 29 March, 2024; v1 submitted 13 February, 2024; originally announced February 2024.

Comments: 20 pages, 30 figures Submitted to EPJ-C

Small-angle X-ray resonant magnetic scattering at the Co M$_{2,3}$ and L$_3$ edges observed with photoemission electron microscopy

Authors: Alexis Wartelle, Marisel Di Pietro Martínez, Olivier Fruchart, Philippe David, Guillaume Beutier

Abstract: X-ray magnetic circular dichroism is an efficient contrast mechanism allowing for a direct sensitivity to magnetization. Combined with an imaging technique such as photoemission electron microscopy, it has been successfully applied to high-resolution investigations of ferromagnetic thin films but also of three-dimensional systems thanks to the transmission-type contrast in their shadow. Our focus… ▽ More X-ray magnetic circular dichroism is an efficient contrast mechanism allowing for a direct sensitivity to magnetization. Combined with an imaging technique such as photoemission electron microscopy, it has been successfully applied to high-resolution investigations of ferromagnetic thin films but also of three-dimensional systems thanks to the transmission-type contrast in their shadow. Our focus in this work is the wave-optics scattering pattern that can be observed near such a shadow's rim. Taking advantage of non-uniform magnetic states present in near-micron-size Co$_{1-x}$Gd$_x$ beads, we first show how X-ray resonant magnetic scattering affects the Fresnel diffraction at the Co L$_3$ edge. In order to confirm this observation, we then turn to the Co M$_{2,3}$ edges. There, we measure magnetic scattering patterns with a significantly increased spatial extent (due to the larger wavelength), despite the signal's weakness. The patterns' origin is supported by a comparison between our experimental data and a simple analytical model, then numerical simulations. △ Less

Submitted 8 February, 2024; originally announced February 2024.

Comments: 13 pages, 11 figures

Nonlinear electrodynamics for the vacuum of Dirac materials. Photon magnetic properties and radiation pressures

Authors: A. W. Romero Jorge, A. Pérez Martínez, E. Rodríguez Querts

Abstract: We investigate the magnetic properties of photons propagating through Dirac materials in a magnetic field, considering both vacuum and medium contributions. Photon propagation properties are obtained through a second-order expansion of non-linear Euler-Heisenberg electrodynamics at finite density and temperature considering Dirac material parameters (Dirac fine structure constant, band gap and Fer… ▽ More We investigate the magnetic properties of photons propagating through Dirac materials in a magnetic field, considering both vacuum and medium contributions. Photon propagation properties are obtained through a second-order expansion of non-linear Euler-Heisenberg electrodynamics at finite density and temperature considering Dirac material parameters (Dirac fine structure constant, band gap and Fermi velocity). Total magnetization (including electrons and photon contributions) and photon-effective magnetic moment are computed. Observables such as photon energy density, radiation pressure, and Poynting vector are obtained by an average of components of the energy-momentum tensor. All quantities are expressed in terms of Lagrangian derivatives. Those related to the vacuum are valid for any value of the external magnetic field, and both the weak and strong field limits are recovered. We discuss some ideas of experiments that may contribute to testing in Dirac materials the phenomenology of the strong magnetic field in the quantum electrodynamic vacuum and how non-linear corrections on the magnetization, radiation pressure, and birefringence, are amplified up to $10^3$ times QED corrections. △ Less

Submitted 3 June, 2024; v1 submitted 1 February, 2024; originally announced February 2024.

Comments: 35 pages, 8 figures

Magnetized Strange Stars and Signals of Gravitational Waves

Authors: S. López Pérez, D. Manreza Paret, A. Pérez Martínez

Abstract: We study the emission of gravitational waves from spheroidal magnetized strange stars for both an isolated slowly rotating star and a binary system. In the first case, we compute the quadrupole moment and the amplitude of gravitational waves that may be emitted. For the binary system, the tidal deformability is obtained by solving simultaneously the system of spheroidal structure equations and the… ▽ More We study the emission of gravitational waves from spheroidal magnetized strange stars for both an isolated slowly rotating star and a binary system. In the first case, we compute the quadrupole moment and the amplitude of gravitational waves that may be emitted. For the binary system, the tidal deformability is obtained by solving simultaneously the system of spheroidal structure equations and the Love number equation. These results are compared with the data inferred from the GW170817 event which is also used to calculate the mass and tidal deformability of the companion star in the binary system. Our model supports binary systems formed by magnetized strange stars describing reasonable signals of gravitational waves contrasted with other models of binary systems composed of magnetized hadronic stars and non-magnetized quark stars. △ Less

Submitted 31 January, 2024; v1 submitted 22 January, 2024; originally announced January 2024.

On the determination of the interaction time of GeV neutrinos in large argon gas TPCs

Authors: A. Saá-Hernández, D. González-Díaz, J. Martín-Albo, M. Tuzi, P. Amedo, J. Baldonedo, C. Benítez, S. Bounasser, E. Casarejos, J. Collazo, A. Fernández-Prieto, D. J. Fernández-Posada, S. Leardini, D. Rodas-Rodríguez, A. L. Saborido, A. Segade, A. Slatera

Abstract: Next-generation megawatt-scale neutrino beams open the way to studying neutrino-nucleus scattering resorting, for the first time, to gaseous targets. This could lead to deeper knowledge of neutrino cross sections in the energy region between hundreds of MeV and a few GeV, of interest for the upcoming generation of long-baseline neutrino oscillation experiments. The challenge is, therefore, to accu… ▽ More Next-generation megawatt-scale neutrino beams open the way to studying neutrino-nucleus scattering resorting, for the first time, to gaseous targets. This could lead to deeper knowledge of neutrino cross sections in the energy region between hundreds of MeV and a few GeV, of interest for the upcoming generation of long-baseline neutrino oscillation experiments. The challenge is, therefore, to accurately track and (especially) time the particles produced in neutrino interactions in large and seamless volumes down to few-MeV energies. We propose to accomplish this through an optically-read time projection chamber (TPC) filled with high-pressure argon and equipped with both tracking and timing functions. In this work, we present a detailed study of the time-tagging capabilities of such a device, based on end-to-end optical simulations that include the effect of photon propagation, photosensor response, dark-count rate and pulse reconstruction. We show that the neutrino interaction time could be reconstructed from the primary-scintillation signal with a precision in the range 1--2.5~ns ($σ$) for point-like deposits with energies down to 5~MeV, and well below 1~ns for minimum-ionizing particle tracks. A discussion on previous limitations towards such a detection technology, and how they can be realistically overcome in the near future thanks to recent developments in the field, is presented (particularly the strong scintillation yields recently reported for Ar/CF$_4$ mixtures). The performance presented in our analysis seems to be well within reach of next-generation neutrino-oscillation experiments through the instrumentation of the proposed TPC with conventional reflective materials and a SiPM carpet behind a transparent cathode. △ Less

Submitted 18 January, 2024; originally announced January 2024.

Scintillation of Ar/CF$_4$ mixtures: glass-THGEM characterization with 1% CF$_4$ at 1-1.5 bar

Authors: P. Amedo, R. Hafeji, A. Roberts, A. Lowe, S. Ravinthiran, S. Leardini, K. Majumdar, K. Mavrokoridis, D. González-Díaz

Abstract: Argon gas doped with 1% wavelength-shifter (CF$_4$) has been employed in an optical time projection chamber (OTPC) to image cosmic radiation. We present results obtained during the system commissioning, performed with two stacked glass-THGEMs and an EMCCD camera at 1 bar. Preliminary estimates indicate that the combined optical gain was of the order of 10$^6$ (ph/e), producing sharp and high-contr… ▽ More Argon gas doped with 1% wavelength-shifter (CF$_4$) has been employed in an optical time projection chamber (OTPC) to image cosmic radiation. We present results obtained during the system commissioning, performed with two stacked glass-THGEMs and an EMCCD camera at 1 bar. Preliminary estimates indicate that the combined optical gain was of the order of 10$^6$ (ph/e), producing sharp and high-contrast raw images without resorting to any filtering or post-processing. A first assessment of the impact of pressurization showed no change in the attainable gains when operating at 1.5 bar △ Less

Submitted 8 April, 2024; v1 submitted 12 December, 2023; originally announced December 2023.

Comments: Added reference with DOI, fixed error with axis label in plot

The Power Board of the KM3NeT Digital Optical Module: design, upgrade, and production

Authors: S. Aiello, A. Albert, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, E. Androutsou, M. Anguita, L. Aphecetche, M. Ardid, S. Ardid, H. Atmani, J. Aublin, F. Badaracco, L. Bailly-Salins, Z. Bardacova, B. Baret, A. Bariego Quintana, S. Basegmez du Pree, Y. Becherini, M. Bendahman, F. Benfenati, M. Benhassi, D. M. Benoit , et al. (259 additional authors not shown)

Abstract: The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant gl… ▽ More The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant glass sphere. The module includes also calibration instruments and electronics for power, readout and data acquisition. The power board was developed to supply power to all the elements of the digital optical module. The design of the power board began in 2013, and several prototypes were produced and tested. After an exhaustive validation process in various laboratories within the KM3NeT Collaboration, a mass production batch began, resulting in the construction of over 1200 power boards so far. These boards were integrated in the digital optical modules that have already been produced and deployed, 828 until October 2023. In 2017, an upgrade of the power board, to increase reliability and efficiency, was initiated. After the validation of a pre-production series, a production batch of 800 upgraded boards is currently underway. This paper describes the design, architecture, upgrade, validation, and production of the power board, including the reliability studies and tests conducted to ensure the safe operation at the bottom of the Mediterranean Sea throughout the observatory's lifespan △ Less

Submitted 24 November, 2023; originally announced November 2023.

Searches for neutrino counterparts of gravitational waves from the LIGO/Virgo third observing run with KM3NeT

Authors: KM3NeT Collaboration, S. Aiello, A. Albert, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, E. Androutsou, M. Anguita, L. Aphecetche, M. Ardid, S. Ardid, H. Atmani, J. Aublin, L. Bailly-Salins, Z. Bardačová, B. Baret, A. Bariego-Quintana, S. Basegmez du Pree, Y. Becherini, M. Bendahman, F. Benfenati, M. Benhassi, D. M. Benoit , et al. (251 additional authors not shown)

Abstract: The KM3NeT neutrino telescope is currently being deployed at two different sites in the Mediterranean Sea. First searches for astrophysical neutrinos have been performed using data taken with the partial detector configuration already in operation. The paper presents the results of two independent searches for neutrinos from compact binary mergers detected during the third observing run of the LIG… ▽ More The KM3NeT neutrino telescope is currently being deployed at two different sites in the Mediterranean Sea. First searches for astrophysical neutrinos have been performed using data taken with the partial detector configuration already in operation. The paper presents the results of two independent searches for neutrinos from compact binary mergers detected during the third observing run of the LIGO and Virgo gravitational wave interferometers. The first search looks for a global increase in the detector counting rates that could be associated with inverse beta decay events generated by MeV-scale electron anti-neutrinos. The second one focuses on upgoing track-like events mainly induced by muon (anti-)neutrinos in the GeV--TeV energy range. Both searches yield no significant excess for the sources in the gravitational wave catalogs. For each source, upper limits on the neutrino flux and on the total energy emitted in neutrinos in the respective energy ranges have been set. Stacking analyses of binary black hole mergers and neutron star-black hole mergers have also been performed to constrain the characteristic neutrino emission from these categories. △ Less

Submitted 7 May, 2024; v1 submitted 7 November, 2023; originally announced November 2023.

Comments: 19 pages, 11 figures

Journal ref: JCAP 04 (2024) 026

Modeling the effect of wind speed and direction shear on utility-scale wind turbine power production

Authors: Storm A. Mata, Juan José Pena MartÍnez, Jesús Bas Quesada, Felipe Palou Larrañaga, Neeraj Yadav, Jasvipul S. Chawla, Varun Sivaram, Michael F. Howland

Abstract: Wind speed and direction variations across the rotor affect power production. As utility-scale turbines extend higher into the atmospheric boundary layer (ABL) with larger rotor diameters and hub heights, they increasingly encounter more complex wind speed and direction variations. We assess three models for power production that account for wind speed and direction shear. Two are based on actuato… ▽ More Wind speed and direction variations across the rotor affect power production. As utility-scale turbines extend higher into the atmospheric boundary layer (ABL) with larger rotor diameters and hub heights, they increasingly encounter more complex wind speed and direction variations. We assess three models for power production that account for wind speed and direction shear. Two are based on actuator disc representations and the third is a blade element representation. We also evaluate the predictions from a standard power curve model that has no knowledge of wind shear. The predictions from each model, driven by wind profile measurements from a profiling LiDAR, are compared to concurrent power measurements from an adjacent utility-scale wind turbine. In the field measurements of the utility-scale turbine, discrete combinations of speed and direction shear induce changes in power production of -19% to +34% relative to the turbine power curve for a given hub height wind speed. Positive speed shear generally corresponds to over-performance and positive direction shear to under-performance, relative to the power curve. Overall, the blade element model produces both higher correlation and lower error relative to the other models, but its quantitative accuracy depends on induction and controller sub-models. To further assess the influence of complex, non-monotonic wind profiles, we also drive the models with best-fit power law wind speed profiles and linear wind direction profiles. These idealized inputs produce qualitative and quantitative differences in power predictions from each model, demonstrating that time-varying, non-monotonic wind shear affects wind power production. △ Less

Submitted 26 September, 2023; originally announced September 2023.

Comments: 28 pages, 14 figures in main body, 1 figure in Appendix A, to be published in Wiley Wind Energy

Journal ref: Wind Energy (2024) 1-27

Soft X-ray phase nano-microscopy of micrometre-thick magnets

Authors: Jeffrey Neethi Neethirajan, Benedikt Daurer, Marisel Di Pietro Martínez, Aleš Hrabec, Luke Turnbull, Majid Kazemian, Burkhard Kaulich, Claire Donnelly

Abstract: Imaging of nanoscale magnetic textures within extended material systems is of critical importance both to fundamental research and technological applications. Whilst high resolution magnetic imaging of thin nanoscale samples is well-established with electron and soft X-ray microscopy, the extension to micrometer-thick systems with hard X-rays currently limits high resolution imaging to rare-earth… ▽ More Imaging of nanoscale magnetic textures within extended material systems is of critical importance both to fundamental research and technological applications. Whilst high resolution magnetic imaging of thin nanoscale samples is well-established with electron and soft X-ray microscopy, the extension to micrometer-thick systems with hard X-rays currently limits high resolution imaging to rare-earth magnets. Here we overcome this limitation by establishing soft X-ray magnetic imaging of micrometer-thick systems using the pre-edge phase X-ray Magnetic Circular Dichroism signal, thus making possible the study of a wide range of magnetic materials. By performing dichroic spectro-ptychography, we demonstrate high spatial resolution imaging of magnetic samples up to 1.7 μm thick, an order of magnitude higher than conventionally possible with absorption-based techniques. This new regime of magnetic imaging makes possible the study of extended non rare-earth systems that have until now been inaccessible, from magnetic textures for future spintronic applications to non-rare-earth permanent magnets. △ Less

Submitted 26 September, 2023; originally announced September 2023.

Prospects for combined analyses of hadronic emission from $γ$-ray sources in the Milky Way with CTA and KM3NeT

Authors: T. Unbehaun, L. Mohrmann, S. Funk, S. Aiello, A. Albert, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, E. Androutsou, M. Anghinolfi, M. Anguita, L. Aphecetche, M. Ardid, S. Ardid, H. Atmani, J. Aublin, C. Bagatelas, L. Bailly-Salins, Z. Bardačová, B. Baret, S. Basegmez du Pree, Y. Becherini, M. Bendahman , et al. (249 additional authors not shown)

Abstract: The Cherenkov Telescope Array and the KM3NeT neutrino telescopes are major upcoming facilities in the fields of $γ$-ray and neutrino astronomy, respectively. Possible simultaneous production of $γ$ rays and neutrinos in astrophysical accelerators of cosmic-ray nuclei motivates a combination of their data. We assess the potential of a combined analysis of CTA and KM3NeT data to determine the contri… ▽ More The Cherenkov Telescope Array and the KM3NeT neutrino telescopes are major upcoming facilities in the fields of $γ$-ray and neutrino astronomy, respectively. Possible simultaneous production of $γ$ rays and neutrinos in astrophysical accelerators of cosmic-ray nuclei motivates a combination of their data. We assess the potential of a combined analysis of CTA and KM3NeT data to determine the contribution of hadronic emission processes in known Galactic $γ$-ray emitters, comparing this result to the cases of two separate analyses. In doing so, we demonstrate the capability of Gammapy, an open-source software package for the analysis of $γ$-ray data, to also process data from neutrino telescopes. For a selection of prototypical $γ$-ray sources within our Galaxy, we obtain models for primary proton and electron spectra in the hadronic and leptonic emission scenario, respectively, by fitting published $γ$-ray spectra. Using these models and instrument response functions for both detectors, we employ the Gammapy package to generate pseudo data sets, where we assume 200 hours of CTA observations and 10 years of KM3NeT detector operation. We then apply a three-dimensional binned likelihood analysis to these data sets, separately for each instrument and jointly for both. We find that the largest benefit of the combined analysis lies in the possibility of a consistent modelling of the $γ$-ray and neutrino emission. Assuming a purely leptonic scenario as input, we obtain, for the most favourable source, an average expected 68% credible interval that constrains the contribution of hadronic processes to the observed $γ$-ray emission to below 15%. △ Less

Submitted 2 February, 2024; v1 submitted 6 September, 2023; originally announced September 2023.

Comments: 20 pages, 16 figures. v2: Matches version published in EPJC

Journal ref: European Physical Journal C 84, 112 (2024)

Rényi entropies in the $n\to0$ limit and entanglement temperatures

Authors: Cesar A. Agón, Horacio Casini, Pedro J. Martinez

Abstract: Entanglement temperatures (ET) are a generalization of Unruh temperatures valid for states reduced to any region of space. They encode in a thermal fashion the high energy behavior of the state around a point. These temperatures are determined by an eikonal equation in Euclidean space. We show that the real-time continuation of these equations implies ballistic propagation. For theories with a fre… ▽ More Entanglement temperatures (ET) are a generalization of Unruh temperatures valid for states reduced to any region of space. They encode in a thermal fashion the high energy behavior of the state around a point. These temperatures are determined by an eikonal equation in Euclidean space. We show that the real-time continuation of these equations implies ballistic propagation. For theories with a free UV fixed point, the ET determines the state at a large modular temperature. In particular, we show that the $n \to 0$ limit of Rényi entropies $S_n$, can be computed from the ET. This establishes a formula for these Rényi entropies for any region in terms of solutions of the eikonal equations. In the $n\to 0$ limit, the relevant high-temperature state propagation is determined by a free relativistic Boltzmann equation, with an infinite tower of conserved currents. For the special case of states and regions with a conformal Killing symmetry, these equations coincide with the ones of a perfect fluid. △ Less

Submitted 31 August, 2023; originally announced September 2023.

Comments: 33 pages, 3 figures

Interplay of thermal and non-thermal effects in x-ray-induced ultrafast melting

Authors: Ichiro Inoue, Victor Tkachenko, Yuya Kubota, Fabien Dorchies, Toru Hara, Hauke Höeppner, Yuichi Inubushi, Konrad J. Kapcia, Hae Ja Lee, Vladimir Lipp, Paloma Martinez, Eiji Nishibori, Taito Osaka, Sven Toleikis, Jumpei Yamada, Makina Yabashi, Beata Ziaja, Philip A. Heimann

Abstract: X-ray laser-induced structural changes in silicon undergoing femtosecond melting have been investigated by using an x-ray pump-x-ray probe technique. The experimental results for different initial sample temperatures reveal that the onset time and the speed of the atomic disordering are independent of the initial temperature, suggesting that equilibrium atomic motion in the initial state does not… ▽ More X-ray laser-induced structural changes in silicon undergoing femtosecond melting have been investigated by using an x-ray pump-x-ray probe technique. The experimental results for different initial sample temperatures reveal that the onset time and the speed of the atomic disordering are independent of the initial temperature, suggesting that equilibrium atomic motion in the initial state does not play a pivotal role in the x-ray-induced ultrafast melting. By comparing the observed time-dependence of the atomic disordering and the dedicated theoretical simulations, we interpret that the energy transfer from the excited electrons to ions via electron-ion coupling (thermal effect) as well as a strong modification of the interatomic potential due to electron excitations (non-thermal effect) trigger the ultrafast atomic disordering. Our finding of the interplay of thermal and non-thermal effects in the x-ray-induced melting demonstrates that accurate modeling of intense x-ray interactions with matter is essential to ensure a correct interpretation of experiments using intense x-ray laser pulses. △ Less

Submitted 28 August, 2023; v1 submitted 28 August, 2023; originally announced August 2023.

Dielectric Assist Accelerating Structures for Compact Linear Accelerators of Low Energy Particles in Hadrontherapy Treatments

Authors: Pablo Martinez-Reviriego, Daniel Esperante, Alexej Grudiev, Benito Gimeno, César Blanch, Daniel González-Iglesias, Nuria Fuster-Martínez, Pablo Martín-Luna, Eduardo Martínez, Abraham Menendez, Juan Fuster

Abstract: Dielectric Assist Accelerating (DAA) structures based on ultralow-loss ceramic are being studied as an alternative to conventional disk-loaded copper cavities. This accelerating structure consists of dielectric disks with irises arranged periodically in metallic structures working under the TM$_{02}$-$π$ mode. In this paper, the numerical design of an S-band DAA structure for low beta particles, s… ▽ More Dielectric Assist Accelerating (DAA) structures based on ultralow-loss ceramic are being studied as an alternative to conventional disk-loaded copper cavities. This accelerating structure consists of dielectric disks with irises arranged periodically in metallic structures working under the TM$_{02}$-$π$ mode. In this paper, the numerical design of an S-band DAA structure for low beta particles, such as protons or carbon ions used for Hadrontherapy treatments, is shown. Four dielectric materials with different permittivity and loss tangent are studied as well as different particle velocities. Through optimization, a design that concentrates most of the RF power in the vacuum space near the beam axis is obtained, leading to a significant reduction of power loss on the metallic walls. This allows to fabricate cavities with an extremely high quality factor, over 100 000, and shunt impedance over 300 M$Ω$/m at room temperature. During the numerical study, the design optimization has been improved by adjusting some of the cell parameters in order to both increase the shunt impedance and reduce the peak electric field in certain locations of the cavity, which can lead to instabilities in its normal functioning. △ Less

Submitted 7 August, 2023; originally announced August 2023.

Embedded Software of the KM3NeT Central Logic Board

Authors: S. Aiello, A. Albert, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, E. Androutsou, M. Anghinolfi, M. Anguita, L. Aphecetche, M. Ardid, S. Ardid, H. Atmani, J. Aublin, C. Bagatelas, L. Bailly-Salins, Z. Bardačová, B. Baret, S. Basegmez du Pree, Y. Becherini, M. Bendahman, F. Benfenati, M. Benhassi, D. M. Benoit , et al. (249 additional authors not shown)

Abstract: The KM3NeT Collaboration is building and operating two deep sea neutrino telescopes at the bottom of the Mediterranean Sea. The telescopes consist of latices of photomultiplier tubes housed in pressure-resistant glass spheres, called digital optical modules and arranged in vertical detection units. The two main scientific goals are the determination of the neutrino mass ordering and the discovery… ▽ More The KM3NeT Collaboration is building and operating two deep sea neutrino telescopes at the bottom of the Mediterranean Sea. The telescopes consist of latices of photomultiplier tubes housed in pressure-resistant glass spheres, called digital optical modules and arranged in vertical detection units. The two main scientific goals are the determination of the neutrino mass ordering and the discovery and observation of high-energy neutrino sources in the Universe. Neutrinos are detected via the Cherenkov light, which is induced by charged particles originated in neutrino interactions. The photomultiplier tubes convert the Cherenkov light into electrical signals that are acquired and timestamped by the acquisition electronics. Each optical module houses the acquisition electronics for collecting and timestam** the photomultiplier signals with one nanosecond accuracy. Once finished, the two telescopes will have installed more than six thousand optical acquisition nodes, completing one of the more complex networks in the world in terms of operation and synchronization. The embedded software running in the acquisition nodes has been designed to provide a framework that will operate with different hardware versions and functionalities. The hardware will not be accessible once in operation, which complicates the embedded software architecture. The embedded software provides a set of tools to facilitate remote manageability of the deployed hardware, including safe reconfiguration of the firmware. This paper presents the architecture and the techniques, methods and implementation of the embedded software running in the acquisition nodes of the KM3NeT neutrino telescopes. △ Less

Submitted 12 October, 2023; v1 submitted 2 August, 2023; originally announced August 2023.

Code Detection for Hardware Acceleration Using Large Language Models

Authors: Pablo Antonio Martínez, Gregorio Bernabé, José Manuel García

Abstract: Large language models (LLMs) have been massively applied to many tasks, often surpassing state-of-the-art approaches. While their effectiveness in code generation has been extensively studied (e.g., AlphaCode), their potential for code detection remains unexplored. This work presents the first analysis of code detection using LLMs. Our study examines essential kernels, including matrix multiplic… ▽ More Large language models (LLMs) have been massively applied to many tasks, often surpassing state-of-the-art approaches. While their effectiveness in code generation has been extensively studied (e.g., AlphaCode), their potential for code detection remains unexplored. This work presents the first analysis of code detection using LLMs. Our study examines essential kernels, including matrix multiplication, convolution, and fast-fourier transform, implemented in C/C++. We propose both a preliminary, naive prompt and a novel prompting strategy for code detection. Results reveal that conventional prompting achieves great precision but poor accuracy (68.8%, 22.3%, and 79.2% for GEMM, convolution, and FFT, respectively) due to a high number of false positives. Our novel prompting strategy substantially reduces false positives, resulting in excellent overall accuracy (91.1%, 97.9%, and 99.7%, respectively). These results pose a considerable challenge to existing state-of-the-art code detection methods. △ Less

Submitted 19 July, 2023; originally announced July 2023.

Towards Zero-power 3D Imaging: VLC-assisted Passive ToF Sensing

Authors: Faisal Ahmed, Miguel Heredia Conde, Paula López Martínez

Abstract: Passive Time-of-Flight (ToF) imaging can be enabled by optical wireless communication (OWC). The lighting infrastructure is the backbone of emerging light-based wireless communication. To this end, communication sources are used as opportunity illuminators to probe the scene, and an array of time-resolved pixels are exploited to demodulate the return, provided that the ToF camera can be externally… ▽ More Passive Time-of-Flight (ToF) imaging can be enabled by optical wireless communication (OWC). The lighting infrastructure is the backbone of emerging light-based wireless communication. To this end, communication sources are used as opportunity illuminators to probe the scene, and an array of time-resolved pixels are exploited to demodulate the return, provided that the ToF camera can be externally synchronized. Our work employs a direct line-of-sight path to synchronize the camera externally. Together with the indirect path given by the reflections from the scene, this yields a bistatic configuration. Each Time-of-Flight (ToF) measurement induced a solution space of ellipsoidal shape and redefined the image formation model based on the bistatic configuration. In this demo, we showcase a passive ToF camera capable of delivering intensity and depth information in practice without emitting photons from the ToF camera. Our passive modality can eliminate built-in illumination sources, thus co** with optical power constraints, as is desired in future ToF cameras. △ Less

Submitted 17 July, 2023; originally announced July 2023.

Comments: Presented in ISCS23

Report number: ISCS23-5

Observation of strong wavelength-shifting in the argon-tetrafluoromethane system

Authors: P. Amedo, D. González-Díaz, F. M. Brunbauer, D. J. Fernández-Posada, E. Oliveri, L. Ropelewski

Abstract: We report the scintillation spectra of Ar-CF$_4$ mixtures in the range 210-800~nm, obtained under X-ray irradiation for various pressures (1-5~bar) and concentrations (0-100%). Special care was taken to eliminate effects related to space charge and recombination, so that results can be extrapolated following conventional wisdom to those expected for minimum ionizing particles under the typical ele… ▽ More We report the scintillation spectra of Ar-CF$_4$ mixtures in the range 210-800~nm, obtained under X-ray irradiation for various pressures (1-5~bar) and concentrations (0-100%). Special care was taken to eliminate effects related to space charge and recombination, so that results can be extrapolated following conventional wisdom to those expected for minimum ionizing particles under the typical electric fields employed in gaseous instrumentation. Our study sheds light into the microscopic pathways leading to scintillation in this family of mixtures. △ Less

Submitted 4 September, 2023; v1 submitted 16 June, 2023; originally announced June 2023.

Comments: Updated to match current journal submission

Thermal masses and trapped-ion quantum spin models: a self-consistent approach to Yukawa-type interactions in the $λ\!φ^4$ model

Authors: Pablo Viñas Martínez, Esperanza López, Alejandro Bermudez

Abstract: The quantum simulation of magnetism in trapped-ion systems makes use of the crystal vibrations to mediate pairwise interactions between spins, which are encoded in the internal electronic states of the ions, and measured in experiments that probe the real-time dynamics. These interactions can be accounted for by a long-wavelength relativistic theory, where the phonons are described by a coarse-gra… ▽ More The quantum simulation of magnetism in trapped-ion systems makes use of the crystal vibrations to mediate pairwise interactions between spins, which are encoded in the internal electronic states of the ions, and measured in experiments that probe the real-time dynamics. These interactions can be accounted for by a long-wavelength relativistic theory, where the phonons are described by a coarse-grained Klein-Gordon field $φ(x)$ locally coupled to the spins that acts as a carrier, leading to an analogue of pion-mediated Yukawa interactions. In the vicinity of a structural transition of the ion crystal, one must go beyond the Klein-Gordon fields, and include additional $λφ^4$ terms responsible for phonon-phonon scattering. This leads to quantum effects that can be expressed by Feynman loop integrals that modify the range of the Yukawa-type spin interactions; an effect that could be used to probe the underlying fixed point of this quantum field theory (QFT). Unfortunately, the rigidity of the trapped-ion crystal makes it challenging to observe genuine quantum effects, such as the flow of the critical point with the quartic coupling $λ$. We hereby show that thermal effects, which can be controlled by laser cooling, can unveil this flow through the appearance of thermal masses in interacting QFTs. We perform self-consistent calculations that resum certain Feynman diagrams and, additionally, go beyond mean-field theory to predict how measurements on the trapped-ion spin system can probe key properties of the $λφ^4$ QFT. △ Less

Submitted 3 July, 2024; v1 submitted 10 May, 2023; originally announced May 2023.

Portable MRI for major sporting events -- a case study on the MotoGP World Championship

Authors: J. M. Algarín, T. Guallart-Naval, E. Gastaldi-Orquín, R. Bosch, F. J. Lloris, E. Pallás, J. P. Rigla, P. Martínez, J. Borreguero, R. Alamar, L. Martí-Bonmatí, J. M. Benlloch, F. Galve, J. Alonso

Abstract: The goal of this work is to showcase the clinical value that portable MRI can provide in crowded events and major sports competitions. We temporarily installed a low-field and low-cost portable MRI system for extremity imaging in the medical facilities of the Ricardo Tormo Motor Racing Circuit during the four days of the Motorcycle Grand Prix held in Valencia (Spain), which closed the 2022 season… ▽ More The goal of this work is to showcase the clinical value that portable MRI can provide in crowded events and major sports competitions. We temporarily installed a low-field and low-cost portable MRI system for extremity imaging in the medical facilities of the Ricardo Tormo Motor Racing Circuit during the four days of the Motorcycle Grand Prix held in Valencia (Spain), which closed the 2022 season of the MotoGP. During this time, we scanned 14 subjects, running a total of 21 protocols for wrist, knee and ankle imaging. Each protocol included a minimum of one T1-weighted 3D-RARE sequence for general anatomical information, and one 3D-STIR sequence to highlight fluid accumulation and inflammation. The circuit medical staff were able to visualize a number of lesions and conditions in the low-field reconstructions, including gonarthrosis, effusion, or Haglund's syndrome, as well as metallic implants and tissue changes due to surgical interventions. Out of eight low-field acquisitions on previously diagnosed lesions, only two (a meniscus tear and a Baker cyst) were not detected by the experts that evaluated our images. The main highlight was that a low-field MRI scan on a subject reporting pain in a wrist revealed a traumatic arthritis which an X-ray radiograph and visual inspection had missed. We have operated in a scenario where high-field MRI is unlikely to play a role but where a low-field system can lead to improved medical attention. In the case reported here, system transport, installation in the circuit facilities and calibration were all uncomplicated. The images presented to the medical staff were mostly unprocessed and there is thus room for improvement. In conclusion, this work supports the claim that low-field MRI can likely provide added value whenever concepts such as accessibility, portability and low-cost outweigh exquisite detail in images. △ Less

Submitted 17 March, 2023; v1 submitted 16 March, 2023; originally announced March 2023.

Real-time methods in JT/SYK holography

Authors: Raúl Arias, Marcelo Botta-Cantcheff, Pedro J. Martinez

Abstract: We study the conventional holographic recipes and its real-time extensions in the context of the correspondence between SYK quantum mechanics and JT gravity. We first observe that only closed contours are allowed to have a 2d space-time holographic dual. Thus, in any real-time formulation of the duality, the boundaries of a classical connected geometry are a set of closed curves, parameterized by… ▽ More We study the conventional holographic recipes and its real-time extensions in the context of the correspondence between SYK quantum mechanics and JT gravity. We first observe that only closed contours are allowed to have a 2d space-time holographic dual. Thus, in any real-time formulation of the duality, the boundaries of a classical connected geometry are a set of closed curves, parameterized by a complex \emph{closed} time contour as in the Schwinger-Keldysh framework. Thereby, a consistent extension of the standard holographic formulas is proposed, in order to describe the correspondence between gravity and boundary quantum models that include averaging on the coupling constants. We investigate our prescription in different AdS$_{1+1}$ solutions with Schwinger-Keldysh boundary condition, dual to a boundary quantum theory at finite temperature defined on a complex time contour, and consider also classical, asymptotically AdS solutions (wormholes) with two disconnected boundaries. In doing this, we revisit the so-called factorization problem, and its resolution in conventional holography by virtue of some (non-local) coupling between disconnected boundaries, and we show how in specific contexts, the averaging proposal by-passes the paradox as well, since it induces a similar effective coupling. △ Less

Submitted 6 March, 2023; originally announced March 2023.

Comments: 29 pages + appendices, 5 figures

Probing invisible neutrino decay with KM3NeT-ORCA

Authors: KM3NeT Collaboration, S. Aiello, A. Albert, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, M. Anghinolfi, M. Anguita, M. Ardid, S. Ardid, J. Aublin, C. Bagatelas, L. Bailly-Salins, B. Baret, S. Basegmez du Pree, Y. Becherini, M. Bendahman, F. Benfenati, E. Berbee, V. Bertin, S. Biagi, M. Boettcher, M. Bou Cabo , et al. (230 additional authors not shown)

Abstract: In the era of precision measurements of the neutrino oscillation parameters, upcoming neutrino experiments will also be sensitive to physics beyond the Standard Model. KM3NeT/ORCA is a neutrino detector optimised for measuring atmospheric neutrinos from a few GeV to around 100 GeV. In this paper, the sensitivity of the KM3NeT/ORCA detector to neutrino decay has been explored. A three-flavour neutr… ▽ More In the era of precision measurements of the neutrino oscillation parameters, upcoming neutrino experiments will also be sensitive to physics beyond the Standard Model. KM3NeT/ORCA is a neutrino detector optimised for measuring atmospheric neutrinos from a few GeV to around 100 GeV. In this paper, the sensitivity of the KM3NeT/ORCA detector to neutrino decay has been explored. A three-flavour neutrino oscillation scenario, where the third neutrino mass state $ν_3$ decays into an invisible state, e.g. a sterile neutrino, is considered. We find that KM3NeT/ORCA would be sensitive to invisible neutrino decays with $1/α_3=τ_3/m_3 < 180$~$\mathrm{ps/eV}$ at $90\%$ confidence level, assuming true normal ordering. Finally, the impact of neutrino decay on the precision of KM3NeT/ORCA measurements for $θ_{23}$, $Δm^2_{31}$ and mass ordering have been studied. No significant effect of neutrino decay on the sensitivity to these measurements has been found. △ Less

Submitted 27 March, 2023; v1 submitted 6 February, 2023; originally announced February 2023.

Comments: 27 pages, 14 figures, bibliography updated, typos corrected

Matching Linear Algebra and Tensor Code to Specialized Hardware Accelerators

Authors: Pablo Antonio Martínez, Jackson Woodruff, Jordi Armengol-Estapé, Gregorio Bernabé, José Manuel García, Michael F. P. O'Boyle

Abstract: Dedicated tensor accelerators demonstrate the importance of linear algebra in modern applications. Such accelerators have the potential for impressive performance gains, but require programmers to rewrite code using vendor APIs - a barrier to wider scale adoption. Recent work overcomes this by matching and replacing patterns within code, but such approaches are fragile and fail to cope with the di… ▽ More Dedicated tensor accelerators demonstrate the importance of linear algebra in modern applications. Such accelerators have the potential for impressive performance gains, but require programmers to rewrite code using vendor APIs - a barrier to wider scale adoption. Recent work overcomes this by matching and replacing patterns within code, but such approaches are fragile and fail to cope with the diversity of real-world codes. We develop ATC, a compiler that uses program synthesis to map regions of code to specific APIs. The map** space that ATC explores is combinatorially large, requiring the development of program classification, dynamic analysis, variable constraint generation and lexical distance matching techniques to make it tractable. We apply ATC to real-world tensor and linear algebra codes and evaluate them against four state-of-the-art approaches. We accelerate between 2.6x and 7x more programs, leading to over an order of magnitude performance improvement. △ Less

Submitted 31 January, 2023; v1 submitted 27 January, 2023; originally announced January 2023.

Comments: This is the author's version of the work. It is posted here for your personal use. Not for redistribution. The definitive Version of Record was published in Proceedings of the 32nd ACM SIGPLAN International Conference on Compiler Construction (CC '23), February 25-26, 2023, Montréal, QC, Canada, https://doi.org/10.1145/3578360.3580262

Journal ref: In Proceedings of the 32nd ACM SIGPLAN International Conference on Compiler Construction (CC '23), February 25-26, 2023, Montréal, QC, Canada

Characteristic Curves and the exponentiation in the Riordan Lie group: A connection through examples

Authors: Pedro J. Chocano, Ana Luzón, Manuel Alonso Morón, Luis Felipe Prieto Martínez

Abstract: We point out how to use the classical characteristic method, that is used to solve quasilinear PDE's, to obtain the matrix exponential of some lower triangle infinite matrices. We use the Lie Frechet structure of the Riordan group described in [4]. After that we describe some linear dynamical systems in $\mathbb{K}[[x]]$ with a concrete involution being a symmetry or a time-reversal symmetry for t… ▽ More We point out how to use the classical characteristic method, that is used to solve quasilinear PDE's, to obtain the matrix exponential of some lower triangle infinite matrices. We use the Lie Frechet structure of the Riordan group described in [4]. After that we describe some linear dynamical systems in $\mathbb{K}[[x]]$ with a concrete involution being a symmetry or a time-reversal symmetry for them. We take this opportunity to assign some dynamical properties to the Pascal Triangle. △ Less

Submitted 31 December, 2022; originally announced January 2023.

Three-dimensional tomographic imaging of the magnetization vector field using Fourier transform holography

Authors: Marisel Di Pietro Martínez, Alexis Wartelle, Carlos Herrero Martínez, Farid Fettar, Florent Blondelle, Jean-François Motte, Claire Donnelly, Luke Turnbull, Feodor Ogrin, Gerrit van der Laan, Horia Popescu, Nicolas Jaouen, Flora Yakhou-Harris, Guillaume Beutier

Abstract: In recent years, interest in expanding from 2D to 3D systems has grown in the magnetism community, from exploring new geometries to broadening the knowledge on the magnetic textures present in thick samples, and with this arise the need for new characterization techniques, in particular tomographic imaging. Here, we present a new tomographic technique based on Fourier transform holography, a lensl… ▽ More In recent years, interest in expanding from 2D to 3D systems has grown in the magnetism community, from exploring new geometries to broadening the knowledge on the magnetic textures present in thick samples, and with this arise the need for new characterization techniques, in particular tomographic imaging. Here, we present a new tomographic technique based on Fourier transform holography, a lensless imaging technique that uses a known reference in the sample to retrieve the object of interest from its diffraction pattern in one single step of calculation, overcoming the phase problem inherent to reciprocal-space-based techniques. Moreover, by exploiting the phase contrast instead of the absorption contrast, thicker samples can be investigated. We obtain a 3D full-vectorial image of a 800 nm-thick extended Fe/Gd multilayer in a 5$μ$m-diameter circular field of view with a resolution of approximately 80 nm. The 3D image reveals worm-like domains with magnetization pointing mostly out of plane near the surface of the sample but that falls in-plane near the substrate. Since the FTH setup is fairly simple, it allows modifying the sample environment. Therefore, this technique could enable in particular a 3D view of the magnetic configuration's response to an external magnetic field. △ Less

Submitted 20 December, 2022; originally announced December 2022.

Comments: 11 pages, 8 figures

Remarks on propagating waves in non-linear vacuum electrodynamics

Authors: M. Ángeles Pérez-García, A. Pérez Martínez, E. Rodríguez Querts

Abstract: Using the quadratic expansion in the photon fields of Euler-Heisenberg (EH) non-linear electrodynamics (NLED) Lagrangian model we study relevant vacuum properties in a scenario involving the propagation of a photon probe in the presence of a background constant and static magnetic field, ${\bf B_e}$. We compute the gauge invariant, symmetric and conserved energy-momentum tensor (EMT) and angular m… ▽ More Using the quadratic expansion in the photon fields of Euler-Heisenberg (EH) non-linear electrodynamics (NLED) Lagrangian model we study relevant vacuum properties in a scenario involving the propagation of a photon probe in the presence of a background constant and static magnetic field, ${\bf B_e}$. We compute the gauge invariant, symmetric and conserved energy-momentum tensor (EMT) and angular momentum tensor (AMT) for arbitrary magnetic field strength using the Hilbert method under the soft-photon approximation. We discuss how the presence of magneto-electric terms in the EH Lagrangian is a source of anisotropy, induce the non-zero trace in the EMT and leads to differences between EMT calculated by the Hilbert or Noether method. From the Hilbert EMT we analyze some quantities of interest such as the energy density, pressures, Poynting vector, and angular momentum vector, comparing and discussing the differences with respect to the improved Noether method. The magnetized vacuum properties are also studied showing that a photon effective magnetic moment can be defined for different polarization modes. The calculations are done in terms of derivatives of the two scalar invariants of electrodynamics, hence, extension to other NLED Lagrangian is straightforward. We discuss further physical implications and experimental strategies to test magnetization, photon pressure, and effective magnetic moment. △ Less

Submitted 20 September, 2023; v1 submitted 9 December, 2022; originally announced December 2022.

Comments: 16 pages, 3 figures, matches published version

Journal ref: Eur. Phys. J. C (2023) 83:746

Comment on "Topological Pum** in a Floquet-Bloch Band"

Authors: Ricardo Chacón, Pedro J. Martínez

Abstract: This manuscript is a comment about a published article in PRL 129, 053201 (2022) by J. Minguzzi et al. This manuscript is a comment about a published article in PRL 129, 053201 (2022) by J. Minguzzi et al. △ Less

Submitted 28 November, 2022; originally announced November 2022.

Comments: 2 pages with 7 references

Analysis of a two-layer energy balance model: long time behaviour and greenhouse effect

Authors: Piermarco Cannarsa, Valerio Lucarini, Patrick Martinez, Cristina Urbani, Judith Vancostenoble

Abstract: We study a two-layer energy balance model, that allows for vertical exchanges between a surface layer and the atmosphere. The evolution equations of the surface temperature and the atmospheric temperature are coupled by the emission of infrared radiation by one level, that emission being captured by the other layer, and the effect of all non radiative vertical exchanges of energy. Therefore, an es… ▽ More We study a two-layer energy balance model, that allows for vertical exchanges between a surface layer and the atmosphere. The evolution equations of the surface temperature and the atmospheric temperature are coupled by the emission of infrared radiation by one level, that emission being captured by the other layer, and the effect of all non radiative vertical exchanges of energy. Therefore, an essential parameter is the absorptivity of the atmosphere, denoted $ε_a$. The value of $ε_a$ depends critically on greenhouse gases: increasing concentrations of $CO_2$ and $CH_4$ lead to a more opaque atmosphere with higher values of $ε_a$. First we prove that global existence of solutions of the system holds if and only if $ε_a \in (0, 2)$, and blow up in finite time occurs if $ε_a > 2$. (Note that the physical range of values for $ε_a$ is $(0, 1]$.) Next, we explain the long time dynamics for $ε_a \in (0, 2)$, and we prove that all solutions converge to some equilibrium point. Finally, motivated by the physical context, we study the dependence of the equilibrium points with respect to the involved parameters, and we prove in particular that the surface temperature increases with respect to $ε_a$. This is the key mathematical manifestation of the greenhouse effect. △ Less

Submitted 29 September, 2023; v1 submitted 28 November, 2022; originally announced November 2022.

Comments: 56 pages, 17 figues

MSC Class: 86A08; 34C11; 34C12; 34D05

Optimising data processing for nanodiamond based relaxometry

Authors: Thea A. Vedelaar, Thamir H. Hamoh, Felipe Perona Martinez, Mayeul Chipaux, Romana Schirhagl

Abstract: The nitrogen-vacancy (NV) center in diamond is a powerful and versatile quantum sensor for diverse quantities. In particular, relaxometry (or T1), allows to detect magnetic noise at the nanoscale. While increasing the number of NV centers in a nanodiamond allows to collect more signal, a standardized method to extract information from relaxometry experiments of such NV ensembles is still missing.… ▽ More The nitrogen-vacancy (NV) center in diamond is a powerful and versatile quantum sensor for diverse quantities. In particular, relaxometry (or T1), allows to detect magnetic noise at the nanoscale. While increasing the number of NV centers in a nanodiamond allows to collect more signal, a standardized method to extract information from relaxometry experiments of such NV ensembles is still missing. In this article, we use T1 relaxation curves acquired at different concentrations of gadolinium ions to calibrate and optimize the entire data processing flow, from the acquired raw data to the extracted T1. In particular, we use a bootstrap to derive a signal to noise ratio (SNR) that can be quantitatively compared from one method to another. At first, T1 curves are extracted from photoluminescence pulses. We compare integrating their signal through an optimized window as performed conventionally, to fitting a known function on it. Fitting the decaying T1 curves allows to obtain the relevant T1 value. We compared here the three most commonly used fit models that are, single, bi, and stretched-exponential. We finally investigated the effect of the bootstrap itself on the precision of the result as well as the use of a rolling window to allows time-resolution. △ Less

Submitted 26 April, 2023; v1 submitted 14 November, 2022; originally announced November 2022.

Comments: With Advanced Quantum Technologies (26/04/2023) / Supplementary information included / 15 pages + 1SI, 6 figures + 1SI, 58 references

Mutual Information of Generalized Free Fields

Authors: Valentin Benedetti, Horacio Casini, Pedro J. Martinez

Abstract: We study generalized free fields (GFF) from the point of view of information measures. We first review conformal GFF, their holographic representation, and the ambiguities in the assignation of algebras to regions that arise in these theories. Then we study the mutual information (MI) in several geometric configurations. The MI displays unusual features at the short distance limit: a leading volum… ▽ More We study generalized free fields (GFF) from the point of view of information measures. We first review conformal GFF, their holographic representation, and the ambiguities in the assignation of algebras to regions that arise in these theories. Then we study the mutual information (MI) in several geometric configurations. The MI displays unusual features at the short distance limit: a leading volume term rather than an area term, and a logarithmic term in any dimensions rather than only for even dimensions as in ordinary CFT's. We find the dependence of some subleading terms on the conformal dimension $Δ$ of the GFF. We study the long distance limit of the MI for regions with boundary in the null cone. The pinching limit of these surfaces show the GFF behaves as an interacting model from the MI point of view. The pinching exponents depend on the choice of algebra. The entanglement wedge algebra choice allows these models to ``fake'' causality, giving results consistent with its role in the description of large $N$ models. △ Less

Submitted 30 September, 2022; originally announced October 2022.

Comments: 28 pages, 8 figures

POAS: A high-performance scheduling framework for exploiting Accelerator Level Parallelism

Authors: Pablo Antonio Martínez, Gregorio Bernabé, Jose Manuel García

Abstract: Heterogeneous computing is becoming mainstream in all scopes. This new era in computer architecture brings a new paradigm called Accelerator Level Parallelism (ALP). In ALP, accelerators are used concurrently to provide unprecedented levels of performance and energy efficiency. To reach that, there are many problems to be solved, one of the most challenging being co-execution. This paper develop… ▽ More Heterogeneous computing is becoming mainstream in all scopes. This new era in computer architecture brings a new paradigm called Accelerator Level Parallelism (ALP). In ALP, accelerators are used concurrently to provide unprecedented levels of performance and energy efficiency. To reach that, there are many problems to be solved, one of the most challenging being co-execution. This paper develops a scheduling framework called POAS, a general method for providing co-execution to generic applications. Unlike other scheduling approaches, POAS does not directly schedule applications. Instead, it is a generic model that transforms any application to make it suitable for co-execution, so that it can be executed in ALP environments. Our proposal is composed of four differentiated steps: predict, optimize, adapt and schedule. During these phases, different modifications are implemented in the application to make it suitable to be executed in ALP environments. In this work we also apply our framework to a matrix multiplication case study, outlining the critical and most important steps to port the application with POAS. We evaluate our POAS-based implementation for matrix multiplication on a CPU/GPU/XPU environment using CPU cores, CUDA cores and tensor cores (XPU). Our experiments prove that co-execution in the studied scenario can benefit from ALP, yielding speedups of up to 45% with respect to using only one accelerator. The proven flexibility and potential of POAS make it an excellent candidate to reach ALP in future computer systems. △ Less

Submitted 21 September, 2022; originally announced September 2022.

Finite temperature effects on magnetized Bose-Einstein condensate stars

Authors: Gretel Quintero Angulo, Lismary de la Caridad Suárez González, Aurora Pérez Martínez, Hugo Pérez Rojas

Abstract: We study the role of temperature and magnetic field on the equation of state and macroscopic properties of Bose-Einstein condensate stars. These compact objects are composed of a condensed gas of interacting neutral vector bosons coupled to a uniform and constant magnetic field. We found that the main consequence of a finite temperature in the magnetized equations of state is to increase the inner… ▽ More We study the role of temperature and magnetic field on the equation of state and macroscopic properties of Bose-Einstein condensate stars. These compact objects are composed of a condensed gas of interacting neutral vector bosons coupled to a uniform and constant magnetic field. We found that the main consequence of a finite temperature in the magnetized equations of state is to increase the inner pressure of the star. As a consequence, magnetized hot Bose-Einstein condensate stars are larger and heavier than their zero-temperature counterparts. However, the maximum masses obtained by the model remain almost unchanged, and the magnetic deformation of the star increases with the temperature. Besides, augmenting the temperature reduces the number of stable stars, an effect that the magnetic field enhances. The implications of our results for the star's evolution, compactness, redshift, and mass quadupolar moment are also analyzed. △ Less

Submitted 9 September, 2022; v1 submitted 31 August, 2022; originally announced September 2022.

Low-Complexity Loeffler DCT Approximations for Image and Video Coding

Authors: D. F. G. Coelho, R. J. Cintra, F. M. Bayer, S. Kulasekera, A. Madanayake, P. A. C. Martinez, T. L. T. Silveira, R. S. Oliveira, V. S. Dimitrov

Abstract: This paper introduced a matrix parametrization method based on the Loeffler discrete cosine transform (DCT) algorithm. As a result, a new class of eight-point DCT approximations was proposed, capable of unifying the mathematical formalism of several eight-point DCT approximations archived in the literature. Pareto-efficient DCT approximations are obtained through multicriteria optimization, where… ▽ More This paper introduced a matrix parametrization method based on the Loeffler discrete cosine transform (DCT) algorithm. As a result, a new class of eight-point DCT approximations was proposed, capable of unifying the mathematical formalism of several eight-point DCT approximations archived in the literature. Pareto-efficient DCT approximations are obtained through multicriteria optimization, where computational complexity, proximity, and coding performance are considered. Efficient approximations and their scaled 16- and 32-point versions are embedded into image and video encoders, including a JPEG-like codec and H.264/AVC and H.265/HEVC standards. Results are compared to the unmodified standard codecs. Efficient approximations are mapped and implemented on a Xilinx VLX240T FPGA and evaluated for area, speed, and power consumption. △ Less

Submitted 28 July, 2022; originally announced July 2022.

Comments: 25 pages, 11 figures, 7 tables

Journal ref: J. Low Power Electron. Appl. 2018, 8(4), 46

RISTRETTO: coronagraph and AO designs enabling High Dispersion Coronagraphy at 2 lambda/D

Authors: N. Blind, B. Chazelas, J. Kühn, E. Hocini, C. Lovis, M. Beaulieu, T. Fusco, L. Genolet, O. Guyon, J. Hagelberg, I. Hughes, P. Martinez, J. -F. Sauvage, R. Schnell, M. Sordet, A. Spang

Abstract: RISTRETTO is the evolution of the original idea of coupling the VLT instruments SPHERE and ESPRESSO, aiming at High Dispersion Coronagraphy. RISTRETTO is a visitor instrument that should enable the characterization of the atmospheres of nearby exoplanets in reflected light, by using the technique of high-contrast, high-resolution spectroscopy. Its goal is to observe Prox Cen b and other planets pl… ▽ More RISTRETTO is the evolution of the original idea of coupling the VLT instruments SPHERE and ESPRESSO, aiming at High Dispersion Coronagraphy. RISTRETTO is a visitor instrument that should enable the characterization of the atmospheres of nearby exoplanets in reflected light, by using the technique of high-contrast, high-resolution spectroscopy. Its goal is to observe Prox Cen b and other planets placed at about 35mas from their star, i.e. 2lambda/D at lambda=750nm. The instrument is composed of an extreme adaptive optics, a coronagraphic Integral Field Unit, and a diffraction-limited spectrograph (R=140.000, lambda=620-840 nm). We present the status of our studies regarding the coronagraphic IFU and the XAO system. The first in particular is based on a modified version of the PIAA apodizer, allowing nulling on the first diffraction ring. Our proposed design has the potential to reach > 50% coupling and <1E-4 contrast at 2lambda/D in median seeing conditions. △ Less

Submitted 30 August, 2022; v1 submitted 28 July, 2022; originally announced July 2022.

Comments: Proceeding of SPIE Telescopes+Instrumentation 2022. [Added acknowledgments]

The use of Synthetic Data to solve the scalability and data availability problems in Smart City Digital Twins

Authors: Esteve Almirall, Davide Callegaro, Peter Bruins, Mar Santamaría, Pablo Martínez, Ulises Cortés

Abstract: The A.I. disruption and the need to compete on innovation are impacting cities that have an increasing necessity to become innovation hotspots. However, without proven solutions, experimentation, often unsuccessful, is needed. But experimentation in cities has many undesirable effects not only for its citizens but also reputational if unsuccessful. Digital Twins, so popular in other areas, seem li… ▽ More The A.I. disruption and the need to compete on innovation are impacting cities that have an increasing necessity to become innovation hotspots. However, without proven solutions, experimentation, often unsuccessful, is needed. But experimentation in cities has many undesirable effects not only for its citizens but also reputational if unsuccessful. Digital Twins, so popular in other areas, seem like a promising way to expand experimentation proposals but in simulated environments, translating only the half-baked ones, the ones with higher probability of success, to real environments and therefore minimizing risks. However, Digital Twins are data intensive and need highly localized data, making them difficult to scale, particularly to small cities, and with the high cost associated to data collection. We present an alternative based on synthetic data that given some conditions, quite common in Smart Cities, can solve these two problems together with a proof-of-concept based on NO2 pollution. △ Less

Submitted 6 July, 2022; originally announced July 2022.

ACM Class: I.2.1; J.4

Visual anomaly detection in video by variational autoencoder

Authors: Faraz Waseem, Rafael Perez Martinez, Chris Wu

Abstract: Video anomalies detection is the intersection of anomaly detection and visual intelligence. It has commercial applications in surveillance, security, self-driving cars and crop monitoring. Videos can capture a variety of anomalies. Due to efforts needed to label training data, unsupervised approaches to train anomaly detection models for videos is more practical An autoencoder is a neural network… ▽ More Video anomalies detection is the intersection of anomaly detection and visual intelligence. It has commercial applications in surveillance, security, self-driving cars and crop monitoring. Videos can capture a variety of anomalies. Due to efforts needed to label training data, unsupervised approaches to train anomaly detection models for videos is more practical An autoencoder is a neural network that is trained to recreate its input using latent representation of input also called a bottleneck layer. Variational autoencoder uses distribution (mean and variance) as compared to latent vector as bottleneck layer and can have better regularization effect. In this paper we have demonstrated comparison between performance of convolutional LSTM versus a variation convolutional LSTM autoencoder △ Less

Submitted 8 March, 2022; originally announced March 2022.

Portable magnetic resonance imaging of patients indoors, outdoors and at home

Authors: T. Guallart-Naval, J. M. Algarín, R. Pellicer-Guridi, F. Galve, Y. Vives-Gilabert, R. Bosch, E. Pallás, J. M. González, J. P. Rigla, P. Martínez, F. J. Lloris, J. Borreguero, A. Marcos-Perucho, V. Negnevitsky, L. Martí-Bonmatí, A. Ríos, J. M. Benlloch, J. Alonso

Abstract: Mobile medical imaging devices are invaluable for clinical diagnostic purposes both in and outside healthcare institutions. Among the various imaging modalities, only a few are readily portable. Magnetic resonance imaging (MRI), the gold standard for numerous healthcare conditions, does not traditionally belong to this group. Recently, low-field MRI start-up companies have demonstrated the first d… ▽ More Mobile medical imaging devices are invaluable for clinical diagnostic purposes both in and outside healthcare institutions. Among the various imaging modalities, only a few are readily portable. Magnetic resonance imaging (MRI), the gold standard for numerous healthcare conditions, does not traditionally belong to this group. Recently, low-field MRI start-up companies have demonstrated the first decisive steps towards portability within medical facilities, but these are so far incompatible with more demanding use cases such as in remote and develo** regions, sports facilities and events, medical and military camps, or home healthcare. Here we present in vivo images taken with a light, home-made, low-field extremity MRI scanner outside the controlled environment provided by medical facilities. To demonstrate the true portability of the system and benchmark its performance in various relevant scenarios, we have acquired images of a volunteer's knee in: i) an MRI physics laboratory; ii) an office room; iii) outside a campus building, connected to a nearby power outlet; iv) in open air, powered from a small fuel-based generator; and v) at the volunteer's home. All images have been acquired within clinically viable times, and signal-to-noise ratios (SNR) and tissue contrast suffice for 2D and 3D reconstructions with diagnostic value, with comparable overall image quality across all five situations. Furthermore, the volunteer carries a fixation metallic implant screwed to the femur, which leads to strong artifacts in standard clinical systems but appears sharp in our low-field acquisitions. Altogether, this work opens a path towards highly accessible MRI under circumstances previously unrealistic. △ Less

Submitted 15 February, 2023; v1 submitted 7 March, 2022; originally announced March 2022.

Comments: 17 pages, 4 figures, comments welcome

Journal ref: Sci Rep 12, 13147 (2022)

Oscillating magnetised hybrid stars under the magnifying glass of multi-messenger observations

Authors: Mauro Mariani, Lucas Tonetto, M. Camila Rodríguez, Marcos O. Celi, Ignacio F. Ranea-Sandoval, Milva G. Orsaria, Aurora Pérez Martínez

Abstract: We model neutron stars as magnetised hybrid stars with an abrupt hadron-quark phase transition in their cores, taking into account current constraints from nuclear experiments and multi-messenger observations. We include magnetic field effects considering the Landau level quantisation of charged particles and the anomalous magnetic moment of neutral particles. We construct the magnetised hybrid eq… ▽ More We model neutron stars as magnetised hybrid stars with an abrupt hadron-quark phase transition in their cores, taking into account current constraints from nuclear experiments and multi-messenger observations. We include magnetic field effects considering the Landau level quantisation of charged particles and the anomalous magnetic moment of neutral particles. We construct the magnetised hybrid equation of state, and we compute the particle population, the matter magnetisation and the transverse and parallel pressure components. We integrate the stable stellar models, considering the dynamical stability for \emph{rapid} or \emph{slow} hadron-quark phase conversion. Finally, we calculate the frequencies and dam** times of the fundamental and $g$ non-radial oscillation modes. The latter, a key mode to learn about phase transitions in compact objects, is only obtained for stars with slow conversions. For low magnetic fields, we find that one of the objects of the GW170817 binary system might be a hybrid star belonging to the slow extended stability branch. For magnetars, we find that a stronger magnetic field always softens the hadronic equation of state. Besides, only for some parameter combinations a stronger magnetic field implies a higher hybrid star maximum mass. Contrary to previous results, the incorporation of anomalous magnetic moment does not affect the studied astrophysical quantities. We discuss possible imprints of the microphysics of the equation of state that could be tested observationally in the future, and that might help infer the nature of dense matter and hybrid stars. △ Less

Submitted 24 February, 2022; originally announced February 2022.

Comments: Accepted for publication in MNRAS (February 2022)

Journal ref: Monthly Notices of the Royal Astronomical Society, 2022, stac546