-
Detailed balance in non-equilibrium dynamics of granular matter: derivation and implications
Authors:
Clara C. Wanjura,
Amelie Mayländer,
Othmar Marti,
Raphael Blumenfeld
Abstract:
Discovering fundamental principles governing the dynamics of granular media has been a long-standing challenge. Recent predictions of detailed balance steady states (DBSS), supported by experimental observations in cyclic shear experiments of planar granular systems, called into question the common belief that the detailed balance principle is only a feature of equilibrium. Here, we first show ana…
▽ More
Discovering fundamental principles governing the dynamics of granular media has been a long-standing challenge. Recent predictions of detailed balance steady states (DBSS), supported by experimental observations in cyclic shear experiments of planar granular systems, called into question the common belief that the detailed balance principle is only a feature of equilibrium. Here, we first show analytically that DBSS in planar granular dynamics arise when a certain conditional cell order distribution is independent of the condition. We then demonstrate that this condition is met in rotational shear experiments, which indeed also give rise to robust DBSS. This suggests that DBSS not only exist but are also quite common. We also show that, when the unconditional cell order distribution maximises the entropy, as has been found recently, then this distribution is determined by a single parameter - the ratio of splitting and merging rates of cells of any arbitrary order. These results simplify the modelling of the complex dynamics of planar granular systems to the solution of recently proposed evolution equations, demonstrating their predictive power.
△ Less
Submitted 7 April, 2024;
originally announced April 2024.
-
Deal-Grove Oxidation and Nanoparticle Adhesion - an AFM Study
Authors:
Clara C. Wanjura,
Daniel Geiger,
Irina Schrezenmeier,
Matthias Roos,
Othmar Marti
Abstract:
We study the formation of nanometer thick oxide layers around nanoparticles (plateaus) in a wet nitrogen environment over 32 days. We determine both the plateau height and the lateral force needed to remove the particles with an atomic force microscope (AFM). The height is well described by the Deal-Grove model for a thermally activated diffusion limited oxidation process. Furthermore, we observe…
▽ More
We study the formation of nanometer thick oxide layers around nanoparticles (plateaus) in a wet nitrogen environment over 32 days. We determine both the plateau height and the lateral force needed to remove the particles with an atomic force microscope (AFM). The height is well described by the Deal-Grove model for a thermally activated diffusion limited oxidation process. Furthermore, we observe that height and force appear to be correlated suggesting that the rise in adhesion forces is mainly governed by an oxidation process. Since the plateaus are the result of a change in the chemical structure, the surface remains permanently altered even after the removal of the nanoparticles. This observation is of great importance for many applications requiring smooth silicon surfaces, such as photolithography, where small contamination can cause the observed oxidation process and significantly increase the surface roughness.
△ Less
Submitted 12 February, 2019;
originally announced February 2019.
-
Comparison of nanomechanical properties of in vivo and in vitro keratin 8/18 networks
Authors:
Tobias Paust,
Anke Leitner,
Ulla Nolte,
Michael Beil,
Harald Herrmann,
Othmar Marti
Abstract:
In our work we compare the mechanical properties of the extracted keratin cytoskeleton of pancreatic carcinoma cells with the mechanical properties of in vitro assembled keratin 8/18 networks. For this purpose we use microrheology measurements with embedded tracer beads. This method is a suitable tool, because the size of the beads compared to the meshsize of the network allows us to treat the net…
▽ More
In our work we compare the mechanical properties of the extracted keratin cytoskeleton of pancreatic carcinoma cells with the mechanical properties of in vitro assembled keratin 8/18 networks. For this purpose we use microrheology measurements with embedded tracer beads. This method is a suitable tool, because the size of the beads compared to the meshsize of the network allows us to treat the network as a continuum. Observing the beads motion with a CCD-High-Speed-Camera then leads to the dynamic shear modulus. Our measurements show lower storage moduli with increasing distance between the rim of the nucleus and the bead, but no clear tendency for the loss modulus. The same measurement method applied to in vitro assembled keratin 8/18 networks shows different characteristics of storage and loss moduli. The storage modulus is one order of magnitude lower than that of the extracted cytoskeleton and the loss modulus is higher. We draw conclusions on the network topology of both keratin network types based on the mechanical behaviour.
△ Less
Submitted 6 November, 2015;
originally announced November 2015.
-
Active multi-point microrheology of cytoskeletal networks
Authors:
Tobias Paust,
Katinka Mertens,
Ines Martin,
Michael Beil,
Othmar Marti
Abstract:
Active microrheology is a valuable tool to determine viscoelastic properties of polymer networks. Observing the beads response to the excitation of a reference leads to dynamic and morphological information of the material. In this work we present an expansion of the well-known active two-point microrheology. By measuring the response of multiple particles in the viscoelastic medium in response to…
▽ More
Active microrheology is a valuable tool to determine viscoelastic properties of polymer networks. Observing the beads response to the excitation of a reference leads to dynamic and morphological information of the material. In this work we present an expansion of the well-known active two-point microrheology. By measuring the response of multiple particles in the viscoelastic medium in response to the excitation of a reference particle we are able to determine the force propagation in the polymer network.
△ Less
Submitted 3 July, 2014;
originally announced July 2014.
-
High speed nanotribology with quartz crystal resonators via Atomic Force Microscopy
Authors:
Fengzhen Zhang,
Othmar Marti,
Stefan Walheim,
Thomas Schimmel
Abstract:
Friction measurements in the range of several meters per second are still of great interests. With the atomic force microscopy (AFM), the oscilaltion situation of the quartz crystal resonators of 3MHz resonance frequency are studied. And the oscillation speed could reach up to several m/s. Then the friction measurements are carried out on the Fischer Pattern, which is prepared on the quartz crysta…
▽ More
Friction measurements in the range of several meters per second are still of great interests. With the atomic force microscopy (AFM), the oscilaltion situation of the quartz crystal resonators of 3MHz resonance frequency are studied. And the oscillation speed could reach up to several m/s. Then the friction measurements are carried out on the Fischer Pattern, which is prepared on the quartz crystal resonator. In this article, we present how to measure the oscillation speeds of the quartz crystal resonator and the friction measurements under different designs. Calibration method and the calculation methods are also discussed in details. Although there are errors in the AFM measurements due to the setup itself and the oscillating quartz which could highly affect the sharpness of the cantilever tip, the results indicate that the local friction coefficients with oscillation are higher than that without oscillation.
△ Less
Submitted 10 December, 2013;
originally announced December 2013.
-
Deformation induced changes in surface properties of polymers investigated by scanning force microscopy
Authors:
Sabine Hild,
Armin Rosa,
Othmar Marti
Abstract:
In this study the possibility of combining commercial Scanning Force Microscopes (SFM) with stretching devices for the investigation of microscopic surface changes during stepwise elongation is investigated. Different types of stretching devices have been developed either for Scanning Platform-SFM or for Stand Alone-SFM. Their suitability for the investigation of deformation induced surface change…
▽ More
In this study the possibility of combining commercial Scanning Force Microscopes (SFM) with stretching devices for the investigation of microscopic surface changes during stepwise elongation is investigated. Different types of stretching devices have been developed either for Scanning Platform-SFM or for Stand Alone-SFM. Their suitability for the investigation of deformation induced surface changes is demonstrated. A uniaxially oriented polypropylene film is stretched vertically to its extrusion direction. The reorientation of its microfibrillar structure is investigated and correlated to macroscopic structural changes determined by taking a force-elongation curve. Microtome cuts of natural rubber filled with 15 PHR carbon black are stretched. Changes in topography, local stiffness and adhesive force are simultaneously reported by using a new imaging method called Pulsed Force Mode (PFM).
△ Less
Submitted 10 December, 2013;
originally announced December 2013.
-
Interaction of Epithelial Cells with Surfaces and Surfaces Decorated by Molecules
Authors:
Daniele Martini,
Othmar Marti,
Michael Beil,
T. Paust,
C. Huang,
M. Moosmann,
J. **,
T. Heiler,
R. Gröger,
Thomas Schimmel,
Stefan Walheim
Abstract:
A detailed understanding of the interface between living cells and substrate materials is of rising importance in many fields of medicine, biology and biotechnology. Cells at interfaces often form epithelia. The physical barrier that they form is one of their main functions. It is governed by the properties of the networks forming the cytoskeleton systems and by cell-to-cell contacts. Different su…
▽ More
A detailed understanding of the interface between living cells and substrate materials is of rising importance in many fields of medicine, biology and biotechnology. Cells at interfaces often form epithelia. The physical barrier that they form is one of their main functions. It is governed by the properties of the networks forming the cytoskeleton systems and by cell-to-cell contacts. Different substrates with varying surface properties modify the migration velocity of the cells. On the one hand one can change the materials composition. Organic and inorganic materials induce differing migration velocities in the same cell system. Within the same class of materials, a change of the surface stiffness or of the surface energy modifies the migration velocity, too. For our cell adhesion studies a variety of different, homogeneous substrates were used (polymers, bio-polymers, metals, oxides). In addition, an effective lithographic method, Polymer Blend Lithography (PBL), is reported, to produce patterned Self-Assembled Monolayers (SAM) on solid substrates featuring two or three different chemical functionalities. This we achieve without the use of conventional lithography like e-beam or UV lithography, only by using self-organization. These surfaces are decorated with a Teflon-like and with an amino-functionalized molecular layer. The resulting pattern is a copy of a previously created self-organized polymer pattern, featuring a scalable lateral domain size in the sub-micron range down below 100 nanometers. The resulting monolayer pattern features a high chemical and biofunctional contrast with feature sizes in the range of cell adhesion complexes like e.g. focal adhesion points.
△ Less
Submitted 2 March, 2013;
originally announced March 2013.
