-
Scanning spin probe based on magnonic vortex quantum cavities
Authors:
Carlos A. González-Gutiérrez,
David García-Pons,
David Zueco,
María José Martínez-Pérez
Abstract:
Performing nanoscale scanning electron paramagnetic resonance (EPR) requires three essential ingredients. First, a static magnetic field together to field gradients to Zeeman split the electronic energy levels with spatial resolution. Second, a radiofrequency (rf) magnetic field capable of inducing spin transitions. Finally, a sensitive detection method to quantify the energy absorbed by spins. Th…
▽ More
Performing nanoscale scanning electron paramagnetic resonance (EPR) requires three essential ingredients. First, a static magnetic field together to field gradients to Zeeman split the electronic energy levels with spatial resolution. Second, a radiofrequency (rf) magnetic field capable of inducing spin transitions. Finally, a sensitive detection method to quantify the energy absorbed by spins. This is usually achieved by combining externally applied magnetic fields with inductive coils or cavities, fluorescent defects or scanning probes. Here, we theoretically propose the realization of a EPR scanning sensor merging all three characteristics into a single device: the vortex core stabilized in ferromagnetic thin-film discs. On one hand, the vortex ground state generates a significant static magnetic field and field gradients. On the other hand, the precessional motion of the vortex core around its equilibrium position produces a circularly polarized oscillating magnetic field, which is enough to produce spin transitions. Finally, the spin-magnon coupling broadens the vortex gyrotropic frequency, suggesting a direct measure of the presence of unpaired electrons. Moreover, the vortex core can be displaced by simply using external magnetic fields of a few mT, enabling EPR scanning microscopy with large spatial resolution. Our numerical simulations show that, by using low dam** magnets, it is theoretically possible to detect single spins located on the disc's surface. Vortex nanocavities could also attain strong coupling to individual spin molecular qubits, with potential applications to mediate qubit-qubit interactions or to implement qubit readout protocols.
△ Less
Submitted 12 January, 2024;
originally announced January 2024.
-
Measuring the magnon-photon coupling in shaped ferromagnets: tuning of the resonance frequency
Authors:
Sergio Martinez-Losa del Rincon,
Ignacio Gimeno,
Jorge Perez-Bailon,
Victor Rollano,
Fernando Luis,
David Zueco,
Maria Jose Martinez-Perez
Abstract:
Cavity photons and ferromagnetic spins excitations can exchange information coherently in hybrid architectures, at speeds set by their mutual coupling strength. Speed enhancement is usually achieved by optimizing the geometry of the electromagnetic cavity. Here we show that the geometry of the ferromagnet plays also an important role, by setting the fundamental frequency of the magnonic resonator.…
▽ More
Cavity photons and ferromagnetic spins excitations can exchange information coherently in hybrid architectures, at speeds set by their mutual coupling strength. Speed enhancement is usually achieved by optimizing the geometry of the electromagnetic cavity. Here we show that the geometry of the ferromagnet plays also an important role, by setting the fundamental frequency of the magnonic resonator. Using focused ion beam patterning, we vary the aspect ratio of different Permalloy samples reaching operation frequencies above 10 GHz while working at low external magnetic fields. Additionally, we perform broad band ferromagnetic resonance measurements and cavity experiments that demonstrate that the magnon-photon coupling strength can be estimated using either open transmission lines or resonant cavities, yielding very good agreement. Finally, we describe a simple theoretical framework based on electromagnetic and micromagnetic simulations that successfully accounts for the experimental results. This approach can be used to design hybrid quantum systems exploiting whatsoever magnetostatic mode excited in ferromagnets of arbitrary size and shape and to tune their operation conditions.
△ Less
Submitted 30 November, 2022; v1 submitted 8 July, 2022;
originally announced July 2022.
-
Quantum Size Effects in the Magnetic Susceptibility of a Metallic Nanoparticle
Authors:
M. Roda-Llordes,
C. Gonzalez-Ballestero,
A. E. Rubio López,
M. J. Martínez-Pérez,
F. Luis,
O. Romero-Isart
Abstract:
We theoretically study quantum size effects in the magnetic response of a spherical metallic nanoparticle (e.g. gold). Using the Jellium model in spherical coordinates, we compute the induced magnetic moment and the magnetic susceptibility for a nanoparticle in the presence of a static external magnetic field. Below a critical magnetic field the magnetic response is diamagnetic, whereas above such…
▽ More
We theoretically study quantum size effects in the magnetic response of a spherical metallic nanoparticle (e.g. gold). Using the Jellium model in spherical coordinates, we compute the induced magnetic moment and the magnetic susceptibility for a nanoparticle in the presence of a static external magnetic field. Below a critical magnetic field the magnetic response is diamagnetic, whereas above such field the magnetization is characterized by sharp, step-like increases of several tenths of Bohr magnetons, associated with the Zeeman crossing of energy levels above and below the Fermi sea. We quantify the robustness of these regimes against thermal excitations and finite linewidth of the electronic levels. Finally, we propose two methods for experimental detection of the quantum size effects based on the coupling to superconducting quantum interference devices.
△ Less
Submitted 4 November, 2021; v1 submitted 27 October, 2020;
originally announced October 2020.
-
Enhanced molecular spin-photon coupling at superconducting nanoconstrictions
Authors:
I. Gimeno,
W. Kersten,
M. C. Pallarés,
P. Hermosilla,
M. J. Martínez-Pérez,
M. D. Jenkins,
A. Angerer,
C. Sánchez-Azqueta,
D. Zueco,
J. Majer,
A. Lostao,
F. Luis
Abstract:
We combine top-down and bottom-up nanolithography to optimize the coupling of small molecular spin ensembles to $1.4$ GHz on-chip superconducting resonators. Nanoscopic constrictions, fabricated with a focused ion beam at the central transmission line, locally concentrate the microwave magnetic field. Drops of free-radical molecules have been deposited from solution onto the circuits. For the smal…
▽ More
We combine top-down and bottom-up nanolithography to optimize the coupling of small molecular spin ensembles to $1.4$ GHz on-chip superconducting resonators. Nanoscopic constrictions, fabricated with a focused ion beam at the central transmission line, locally concentrate the microwave magnetic field. Drops of free-radical molecules have been deposited from solution onto the circuits. For the smallest ones, the molecules were delivered at the relevant circuit areas by means of an atomic force microscope. The number of spins $N_{\rm eff}$ effectively coupled to each device was accurately determined combining Scanning Electron and Atomic Force Microscopies. The collective spin-photon coupling constant has been determined for samples with $N_{\rm eff}$ ranging between $2 \times 10^{6}$ and $10^{12}$ spins, and for temperatures down to $44$ mK. The results show the well-known collective enhancement of the coupling proportional to the square root of $N_{\rm eff}$. The average coupling of individual spins is enhanced by more than four orders of magnitude (from $4$ mHz up to above $180$ Hz) when the transmission line width is reduced from $400$ microns down to $42$ nm, and reaches maximum values near $1$ kHz for molecules located on the smallest nanoconstrictions. This result opens promising avenues for the realization of magnetic spectroscopy experiments at the nanoscale and for the development of hybrid quantum computation architectures based on molecular spin qubits.
△ Less
Submitted 5 June, 2020;
originally announced June 2020.
-
QED with magnetic textures
Authors:
María José Martínez-Pérez,
David Zueco
Abstract:
Coherent exchange between photons and different matter excitations (like qubits, acoustic surface waves or spins) allows for the entanglement of light and matter and provides a toolbox for performing fundamental quantum physics. On top of that, coherent exchange is a basic ingredient in the majority of quantum information processors. In this work, we develop the theory for coupling between magneti…
▽ More
Coherent exchange between photons and different matter excitations (like qubits, acoustic surface waves or spins) allows for the entanglement of light and matter and provides a toolbox for performing fundamental quantum physics. On top of that, coherent exchange is a basic ingredient in the majority of quantum information processors. In this work, we develop the theory for coupling between magnetic textures (vortices and skyrmions) stabilized in ferromagnetic nanodiscs and photons generated in a circuit. In particular, we show how to perform broadband spectroscopy of the magnetic textures by sending photons through a transmission line and recording the transmission. We also discuss the possibility of reaching the strong coupling regime between these texture excitations and a single photon residing in a cavity.
△ Less
Submitted 4 July, 2019;
originally announced July 2019.
-
Strong coupling of a single photon to a magnetic vortex
Authors:
María José Martínez-Pérez,
David Zueco
Abstract:
Strong light-matter coupling is a necessary condition for exchanging information in quantum information protocols. It is used to couple different qubits (matter) via a quantum bus (photons) or to communicate different type of excitations, e.g. transducing between light and phonons or magnons. An unexplored, so far, interface is the coupling between light and topologically protected particle like e…
▽ More
Strong light-matter coupling is a necessary condition for exchanging information in quantum information protocols. It is used to couple different qubits (matter) via a quantum bus (photons) or to communicate different type of excitations, e.g. transducing between light and phonons or magnons. An unexplored, so far, interface is the coupling between light and topologically protected particle like excitations as magnetic domain walls, skyrmions or vortices. Here, we show theoretically that a single photon living in a superconducting cavity can be coupled strongly to the gyrotropic mode of a magnetic vortex in a nanodisc. We combine numerical and analytical calculations for a superconducting coplanar waveguide resonator and different realizations of the nanodisc (materials and sizes). We show that, for enhancing the coupling, constrictions fabricated in the resonator are beneficial, allowing to reach the strong coupling in CoFe discs of radius $200-400$ nm having resonance frequencies of few GHz. The strong coupling regime permits to exchange coherently a single photon and quanta of vortex excitations. Thus, our calculations show that the device proposed here serves as a transducer between photons and gyrating vortices, opening the way to complement superconducting qubits with topologically protected spin-excitations like vortices or skyrmions. We finish by discussing potential applications in quantum data processing based on the exploitation of the vortex as a short-wavelength magnon emitter.
△ Less
Submitted 29 March, 2019; v1 submitted 11 July, 2018;
originally announced July 2018.
-
NanoSQUID magnetometry of individual cobalt nanoparticles grown by focused electron beam induced deposition
Authors:
M. J. Martínez-Pérez,
B. Müller,
D. Schwebius,
D. Korinski,
R. Kleiner,
J. Sesé,
D. Koelle
Abstract:
We demonstrate the operation of low-noise nano superconducting quantum interference devices (SQUIDs) based on the high critical field and high critical temperature superconductor YBa$_2$Cu$_3$O$_7$ (YBCO) as ultra-sensitive magnetometers for single magnetic nanoparticles (MNPs). The nanoSQUIDs exploit the Josephson behavior of YBCO grain boundaries and have been patterned by focused ion beam milli…
▽ More
We demonstrate the operation of low-noise nano superconducting quantum interference devices (SQUIDs) based on the high critical field and high critical temperature superconductor YBa$_2$Cu$_3$O$_7$ (YBCO) as ultra-sensitive magnetometers for single magnetic nanoparticles (MNPs). The nanoSQUIDs exploit the Josephson behavior of YBCO grain boundaries and have been patterned by focused ion beam milling. This allows to precisely define the lateral dimensions of the SQUIDs so as to achieve large magnetic coupling between the nanoloop and individual MNPs. By means of focused electron beam induced deposition, cobalt MNPs with typical size of several tens of nm have been grown directly on the surface of the sensors with nanometric spatial resolution. Remarkably, the nanoSQUIDs are operative over extremely broad ranges of applied magnetic field (-1 T $< μ_0 H <$ 1 T) and temperature (0.3 K $< T<$ 80 K). All these features together have allowed us to perform magnetization measurements under different ambient conditions and to detect the magnetization reversal of individual Co MNPs with magnetic moments (1 - 30) $\times 10^6\,μ_{\rm B}$. Depending on the dimensions and shape of the particles we have distinguished between two different magnetic states yielding different reversal mechanisms. The magnetization reversal is thermally activated over an energy barrier, which has been quantified for the (quasi) single-domain particles. Our measurements serve to show not only the high sensitivity achievable with YBCO nanoSQUIDs, but also demonstrate that these sensors are exceptional magnetometers for the investigation of the properties of individual nanomagnets.
△ Less
Submitted 28 October, 2016;
originally announced October 2016.
-
NanoSQUIDs: Basics & recent advances
Authors:
M. J. Martínez-Pérez,
D. Koelle
Abstract:
Superconducting Quantum Interference Devices (SQUIDs) are one of the most popular devices in superconducting electronics. They combine the Josephson effect with the quantization of magnetic flux in superconductors. This gives rise to one of the most beautiful manifestations of macroscopic quantum coherence in the solid state. In addition, SQUIDs are extremely sensitive sensors allowing to transduc…
▽ More
Superconducting Quantum Interference Devices (SQUIDs) are one of the most popular devices in superconducting electronics. They combine the Josephson effect with the quantization of magnetic flux in superconductors. This gives rise to one of the most beautiful manifestations of macroscopic quantum coherence in the solid state. In addition, SQUIDs are extremely sensitive sensors allowing to transduce magnetic flux into measurable electric signals. As a consequence, any physical observable that can be converted into magnetic flux, e.g., current, magnetization, magnetic field or position, becomes easily accessible to SQUID sensors. In the late 1980's it became clear that downsizing the dimensions of SQUIDs to the nanometric scale would encompass an enormous increase of their sensitivity to localized tiny magnetic signals. Indeed, nanoSQUIDs opened the way to the investigation of, e.g., individual magnetic nanoparticles or surface magnetic states with unprecedented sensitivities. The purpose of this review is to present a detailed survey of microscopic and nanoscopic SQUID sensors. We will start by discussing the principle of operation of SQUIDs, placing the emphasis on their application as ultrasensitive detectors for small localized magnetic signals. We will continue by reviewing a number of existing devices based on different kinds of Josephson junctions and materials, focusing on their advantages and drawbacks. The last sections are left for applications of nanoSQUIDs in the fields of scanning SQUID microscopy and magnetic particle characterization, putting special stress on the investigation of individual magnetic nanoparticles.
△ Less
Submitted 18 May, 2018; v1 submitted 20 September, 2016;
originally announced September 2016.
-
Three-Axis Vector Nano Superconducting Quantum Interference Device
Authors:
M. J. Martínez-Pérez,
D. Gella,
B. Müller,
V. Morosh,
R. Wöbling,
J. Sesé,
O. Kieler,
R. Kleiner,
D. Koelle
Abstract:
We present the design, realization and performance of a three-axis vector nano Superconducting QUantum Interference Device (nanoSQUID). It consists of three mutually orthogonal SQUID nanoloops that allow distinguishing the three components of the vector magnetic moment of individual nanoparticles placed at a specific position. The device is based on Nb/HfTi/Nb Josephson junctions and exhibits line…
▽ More
We present the design, realization and performance of a three-axis vector nano Superconducting QUantum Interference Device (nanoSQUID). It consists of three mutually orthogonal SQUID nanoloops that allow distinguishing the three components of the vector magnetic moment of individual nanoparticles placed at a specific position. The device is based on Nb/HfTi/Nb Josephson junctions and exhibits linewidths of $\sim 250$ nm and inner loop areas of $600 \times 90$ nm$^2$ and $500 \times 500$ nm$^2$. Operation at temperature $T=4.2$ K, under external magnetic fields up to $\sim 50$ mT is demonstrated. The experimental flux noise below $\sim 250$ ${\rm n}Φ_0/\sqrt{\rm Hz}$ in the white noise limit and the reduced dimensions lead to a total calculated spin sensitivity of $\sim 630$ $μ_{\rm B}/\sqrt{\rm Hz}$ and $\sim 70$ $μ_{\rm B}/\sqrt{\rm Hz}$ for the in-plane and out-of-plane components of the vector magnetic moment, respectively. The potential of the device for studying tridimensional properties of individual nanomagnets is discussed.
△ Less
Submitted 23 June, 2016; v1 submitted 25 April, 2016;
originally announced April 2016.
-
Electronic heat current rectification in hybrid superconducting devices
Authors:
Antonio Fornieri,
María José Martínez-Pérez,
Francesco Giazotto
Abstract:
In this work, we review and expand recent theoretical proposals for the realization of electronic thermal diodes based on tunnel-junctions of normal metal and superconducting thin films. Starting from the basic rectifying properties of a single hybrid tunnel junction, we will show how the rectification efficiency can be largely increased by combining multiple junctions in an asymmetric chain of tu…
▽ More
In this work, we review and expand recent theoretical proposals for the realization of electronic thermal diodes based on tunnel-junctions of normal metal and superconducting thin films. Starting from the basic rectifying properties of a single hybrid tunnel junction, we will show how the rectification efficiency can be largely increased by combining multiple junctions in an asymmetric chain of tunnel-coupled islands. We propose three different designs, analyzing their performance and their potential advantages. Besides being relevant from a fundamental physics point of view, this kind of devices might find important technological application as fundamental building blocks in solid-state thermal nanocircuits and in general-purpose cryogenic electronic applications requiring energy management.
△ Less
Submitted 13 March, 2015; v1 submitted 26 January, 2015;
originally announced January 2015.
-
A normal metal tunnel-junction heat diode
Authors:
A. Fornieri,
M. J. Martinez-Perez,
F. Giazotto
Abstract:
We propose a low-temperature thermal rectifier consisting of a chain of three tunnel-coupled normal metal electrodes. We show that a large heat rectification is achievable if the thermal symmetry of the structure is broken and the central island can release energy to the phonon bath. The performance of the device is theoretically analyzed and, under the appropriate conditions, temperature differen…
▽ More
We propose a low-temperature thermal rectifier consisting of a chain of three tunnel-coupled normal metal electrodes. We show that a large heat rectification is achievable if the thermal symmetry of the structure is broken and the central island can release energy to the phonon bath. The performance of the device is theoretically analyzed and, under the appropriate conditions, temperature differences up to $\sim$ 200 mK between the forward and reverse thermal bias configurations are obtained below 1 K, corresponding to a rectification ratio $\mathcal{R} \sim$ 2000. The simplicity intrinsic to its design joined with the insensitivity to magnetic fields make our device potentially attractive as a fundamental building block in solid-state thermal nanocircuits and in general-purpose cryogenic electronic applications requiring energy management.
△ Less
Submitted 30 April, 2014; v1 submitted 10 April, 2014;
originally announced April 2014.
-
Rectification of electronic heat current by a hybrid thermal diode
Authors:
M. J. Martínez-Pérez,
A. Fornieri,
F. Giazotto
Abstract:
We report the realization of an ultra-efficient low-temperature hybrid heat current rectifier, thermal counterpart of the well-known electric diode. Our design is based on a tunnel junction between two different elements: a normal metal and a superconducting island. Electronic heat current asymmetry in the structure arises from large mismatch between the thermal properties of these two. We demonst…
▽ More
We report the realization of an ultra-efficient low-temperature hybrid heat current rectifier, thermal counterpart of the well-known electric diode. Our design is based on a tunnel junction between two different elements: a normal metal and a superconducting island. Electronic heat current asymmetry in the structure arises from large mismatch between the thermal properties of these two. We demonstrate experimentally temperature differences exceeding $60$ mK between the forward and reverse thermal bias configurations. Our device offers a remarkably large heat rectification ratio up to $\sim 140$ and allows its prompt implementation in true solid-state thermal nanocircuits and general-purpose electronic applications requiring energy harvesting or thermal management and isolation at the nanoscale.
△ Less
Submitted 25 January, 2015; v1 submitted 12 March, 2014;
originally announced March 2014.
-
Coherent caloritronics in Josephson-based nanocircuits
Authors:
M. J. Martínez-Pérez,
P. Solinas,
F. Giazotto
Abstract:
We describe here the first experimental realization of a heat interferometer, thermal counterpart of the well-known superconducting quantum interference device (SQUID). These findings demonstrate, on the first place, the existence of phase-dependent heat transport in Josephson-based superconducting circuits and, on the second place, open the way to novel ways of mastering heat at the nanoscale. Co…
▽ More
We describe here the first experimental realization of a heat interferometer, thermal counterpart of the well-known superconducting quantum interference device (SQUID). These findings demonstrate, on the first place, the existence of phase-dependent heat transport in Josephson-based superconducting circuits and, on the second place, open the way to novel ways of mastering heat at the nanoscale. Combining the use of external magnetic fields for phase biasing and different Josephson junction architectures we show here that a number of heat interference patterns can be obtained. The experimental realization of these architectures, besides being relevant from a fundamental physics point of view, might find important technological application as building blocks of phase-coherent quantum thermal circuits. In particular, the performance of two different heat rectifying devices is analyzed.
△ Less
Submitted 28 January, 2014; v1 submitted 18 November, 2013;
originally announced November 2013.
-
Realization of quantum diffraction of a thermal flux
Authors:
M. J. Martínez-Pérez,
F. Giazotto
Abstract:
The first evidence of the dc Josephson effect dates back to 1963 when J. S. Rowell measured the diffraction pattern of the critical current flowing through a single superconducting tunnel junction subjected to an in-plane magnetic field. Interference of Josephson currents through two tunnel junctions connected in parallel was achieved one year later leading to the first ever superconducting quantu…
▽ More
The first evidence of the dc Josephson effect dates back to 1963 when J. S. Rowell measured the diffraction pattern of the critical current flowing through a single superconducting tunnel junction subjected to an in-plane magnetic field. Interference of Josephson currents through two tunnel junctions connected in parallel was achieved one year later leading to the first ever superconducting quantum interferometer. The latter, together with Rowell's observations, constituted the unequivocal demonstration of the Josephson supercurrent-phase relation. Yet, the Josephson effect has further profound implications going beyond electrical transport, as the interplay between the Cooper condensate and unpaired electrons provides thermal flow through the junction with phase coherence as well. Here we report the first demonstration of quantum diffraction of a heat flux showing that a temperature-biased single Josephson junction is exploited as a diffractor for thermal currents. Specifically, thermal diffraction manifests itself with a peculiar modulation of the electron temperature in a small metallic electrode nearby-contacted to the junction when swee** the magnetic flux $Φ$. Remarkably, the observed temperature dependence exhibits $Φ$-symmetry and a clear reminiscence with a Fraunhofer-like modulation pattern, as expected fingerprints for a quantum diffraction phenomenon. Our results confirm a pristine prediction of quantum heat transport and, joined with double-junction heat interferometry demonstrated in Nature 492, 401 (2012), exemplify the complementary and conclusive proof of the existence of phase-dependent thermal currents in Josephson-coupled superconductors. This approach combined with well-known methods for phase-biasing superconducting circuits provides with a novel tool for mastering heat fluxes at the nanoscale.
△ Less
Submitted 20 November, 2013; v1 submitted 2 October, 2013;
originally announced October 2013.
-
Non-galvanic primary thermometry of a two-dimensional electron gas
Authors:
P. Torresani,
M. J. Martínez-Pérez,
S. Gasparinetti,
J. Renard,
G. Biasiol,
L. Sorba,
F. Giazotto,
S. De Franceschi
Abstract:
We report the experimental realization of a non-galvanic, primary thermometer capable of measuring the electron temperature of a two-dimensional electron gas with negligible thermal load. Such a thermometer consists of a quantum dot whose temperature-dependent, single-electron transitions are detected by means of a quantum-point-contact electrometer. Its operating principle is demonstrated for a w…
▽ More
We report the experimental realization of a non-galvanic, primary thermometer capable of measuring the electron temperature of a two-dimensional electron gas with negligible thermal load. Such a thermometer consists of a quantum dot whose temperature-dependent, single-electron transitions are detected by means of a quantum-point-contact electrometer. Its operating principle is demonstrated for a wide range of electron temperatures from 40 to 800 mK. This noninvasive thermometry can find application in experiments addressing the thermal properties of micrometer-scale mesoscopic electron systems, where heating or cooling electrons requires relatively low thermal budgets.
△ Less
Submitted 10 December, 2013; v1 submitted 9 September, 2013;
originally announced September 2013.
-
Coherent diffraction of thermal currents in Josephson tunnel junctions
Authors:
F. Giazotto,
M. J. Martinez-Perez,
P. Solinas
Abstract:
We theoretically investigate heat transport in temperature-biased Josephson tunnel junctions in the presence of an in-plane magnetic field. In full analogy with the Josephson critical current, the phase-dependent component of the heat flux through the junction displays coherent diffraction. Thermal transport is analyzed in three prototypical junction geometries highlighting their main differences.…
▽ More
We theoretically investigate heat transport in temperature-biased Josephson tunnel junctions in the presence of an in-plane magnetic field. In full analogy with the Josephson critical current, the phase-dependent component of the heat flux through the junction displays coherent diffraction. Thermal transport is analyzed in three prototypical junction geometries highlighting their main differences. Notably, minimization of the Josephson coupling energy requires the quantum phase difference across the junction to undergo π-slips in suitable intervals of magnetic flux. An experimental setup suited to detect thermal diffraction is proposed and analyzed.
△ Less
Submitted 30 August, 2013; v1 submitted 12 July, 2013;
originally announced July 2013.
-
Coupling single molecule magnets to quantum circuits
Authors:
M. D. Jenkins,
T. Hümmer,
M. J. Martínez-Pérez,
J. García-Ripoll,
D. Zueco,
F. Luis
Abstract:
In this work we study theoretically the coupling of single molecule magnets (SMMs) to a variety of quantum circuits, including microwave resonators with and without constrictions and flux qubits. The main results of this study is that it is possible to achieve strong and ultrastrong coupling regimes between SMM crystals and the superconducting circuit, with strong hints that such a coupling could…
▽ More
In this work we study theoretically the coupling of single molecule magnets (SMMs) to a variety of quantum circuits, including microwave resonators with and without constrictions and flux qubits. The main results of this study is that it is possible to achieve strong and ultrastrong coupling regimes between SMM crystals and the superconducting circuit, with strong hints that such a coupling could also be reached for individual molecules close to constrictions. Building on the resulting coupling strengths and the typical coherence times of these molecules (of the order of microseconds), we conclude that SMMs can be used for coherent storage and manipulation of quantum information, either in the context of quantum computing or in quantum simulations. Throughout the work we also discuss in detail the family of molecules that are most suitable for such operations, based not only on the coupling strength, but also on the typical energy gaps and the simplicity with which they can be tuned and oriented. Finally, we also discuss practical advantages of SMMs, such as the possibility to fabricate the SMMs ensembles on the chip through the deposition of small droplets.
△ Less
Submitted 26 September, 2013; v1 submitted 18 June, 2013;
originally announced June 2013.
-
Efficient phase-tunable Josephson thermal rectifier
Authors:
M. J. Martinez-Perez,
F. Giazotto
Abstract:
Josephson tunnel junctions are proposed as efficient phase-tunable thermal rectifiers. The latter exploit the strong temperature dependence of the superconducting density of states and phase-dependence of heat currents flowing through Josephson junctions to operate. Remarkably, large heat rectification coefficients up to 800% can potentially be achieved using conventional materials and standard fa…
▽ More
Josephson tunnel junctions are proposed as efficient phase-tunable thermal rectifiers. The latter exploit the strong temperature dependence of the superconducting density of states and phase-dependence of heat currents flowing through Josephson junctions to operate. Remarkably, large heat rectification coefficients up to 800% can potentially be achieved using conventional materials and standard fabrication methods. In addition, these devices allow for the in-situ fine tuning of the thermal rectification magnitude and direction.
△ Less
Submitted 17 May, 2013; v1 submitted 12 April, 2013;
originally announced April 2013.
-
Fully-Balanced Heat Interferometer
Authors:
M. J. Martinez-Perez,
F. Giazotto
Abstract:
A tunable and balanced heat interferometer is proposed and analyzed. The device consists of two superconductors linked together to form a double-loop interrupted by three Josephson junctions coupled in parallel. Both superconductors are held at different temperatures allowing the heat currents flowing through the structure to interfere. As we show here, thermal transport is coherently modulated th…
▽ More
A tunable and balanced heat interferometer is proposed and analyzed. The device consists of two superconductors linked together to form a double-loop interrupted by three Josephson junctions coupled in parallel. Both superconductors are held at different temperatures allowing the heat currents flowing through the structure to interfere. As we show here, thermal transport is coherently modulated through the application of a magnetic flux. Furthermore, such modulation can be tailored at will through the application of an extra control flux. In addition we show that, provided a proper choice of the system parameters, a fully balanced interferometer is obtained. The latter means that the phase-coherent part of heat current can be controlled to the extent of being fully suppressed. Such a device allows for a versatile operation appearing, therefore, as an attractive key to the onset of low-temperature coherent caloritronic circuits.
△ Less
Submitted 4 April, 2013; v1 submitted 26 October, 2012;
originally announced October 2012.
-
The Josephson heat interferometer
Authors:
F. Giazotto,
M. J. Martinez-Perez
Abstract:
The Josephson effect represents perhaps the prototype of macroscopic phase coherence and is at the basis of the most widespread interferometer, i.e., the superconducting quantum interference device (SQUID). Yet, in analogy to electric interference, Maki and Griffin predicted in 1965 that thermal current flowing through a temperature-biased Josephson tunnel junction is a stationary periodic functio…
▽ More
The Josephson effect represents perhaps the prototype of macroscopic phase coherence and is at the basis of the most widespread interferometer, i.e., the superconducting quantum interference device (SQUID). Yet, in analogy to electric interference, Maki and Griffin predicted in 1965 that thermal current flowing through a temperature-biased Josephson tunnel junction is a stationary periodic function of the quantum phase difference between the superconductors. The interplay between quasiparticles and Cooper pairs condensate is at the origin of such phase-dependent heat current, and is unique to Josephson junctions. In this scenario, a temperature-biased SQUID would allow heat currents to interfere thus implementing the thermal version of the electric Josephson interferometer. The dissipative character of heat flux makes this coherent phenomenon not less extraordinary than its electric (non-dissipative) counterpart. Albeit weird, this striking effect has never been demonstrated so far. Here we report the first experimental realization of a heat interferometer. We investigate heat exchange between two normal metal electrodes kept at different temperatures and tunnel-coupled to each other through a thermal `modulator' in the form of a DC-SQUID. Heat transport in the system is found to be phase dependent, in agreement with the original prediction. With our design the Josephson heat interferometer yields magnetic-flux-dependent temperature oscillations of amplitude up to ~21 mK, and provides a flux-to-temperature transfer coefficient exceeding ~ 60mK/Phi_0 at 235 mK [Phi_0 2* 10^(-15) Wb is the flux quantum]. Besides offering remarkable insight into thermal transport in Josephson junctions, our results represent a significant step toward phase-coherent mastering of heat in solid-state nanocircuits, and pave the way to the design of novel-concept coherent caloritronic devices.
△ Less
Submitted 15 May, 2012;
originally announced May 2012.
-
Phase-controlled superconducting heat-flux quantum modulator
Authors:
F. Giazotto,
M. J. Martinez-Perez
Abstract:
We theoretically put forward the concept of a phase-controlled superconducting heat-flux quantum modulator. Its operation relies on phase-dependent heat current predicted to occur in temperature-biased Josephson tunnel junctions. The device behavior is investigated as a function of temperature bias across the junctions, bath temperature, and junctions asymmetry as well. In a realistic Al-based set…
▽ More
We theoretically put forward the concept of a phase-controlled superconducting heat-flux quantum modulator. Its operation relies on phase-dependent heat current predicted to occur in temperature-biased Josephson tunnel junctions. The device behavior is investigated as a function of temperature bias across the junctions, bath temperature, and junctions asymmetry as well. In a realistic Al-based setup the structure could provide temperature modulation amplitudes up to ~50 mK with flux-to-temperature transfer coefficients exceeding ~125 mK/Phi_0 below 1 K, and temperature modulation frequency of the order of a few MHz. The proposed structure appears as a promising building-block for the implementation of novel-concept caloritronic devices operating at cryogenic temperatures.
△ Less
Submitted 14 May, 2012;
originally announced May 2012.
-
Nongalvanic thermometry for ultracold two-dimensional electron domains
Authors:
S. Gasparinetti,
M. J. Martínez-Pérez,
S. de Franceschi,
J. P. Pekola,
F. Giazotto
Abstract:
Measuring the temperature of a two-dimensional electron gas at temperatures of a few mK is a challenging issue, which standard thermometry schemes may fail to tackle. We propose and analyze a nongalvanic thermometer, based on a quantum point contact and quantum dot, which delivers virtually no power to the electron system to be measured.
Measuring the temperature of a two-dimensional electron gas at temperatures of a few mK is a challenging issue, which standard thermometry schemes may fail to tackle. We propose and analyze a nongalvanic thermometer, based on a quantum point contact and quantum dot, which delivers virtually no power to the electron system to be measured.
△ Less
Submitted 26 March, 2012;
originally announced March 2012.
-
Ac magnetic susceptibility of a molecular magnet submonolayer directly patterned onto a microSQUID sensor
Authors:
M. J. Martínez-Pérez,
E. Bellido,
R. de Miguel,
J. Sesé,
A. Lostao,
C. Gómez-Moreno,
D. Drung,
T. Schurig,
D. Ruiz-Molina,
F. Luis
Abstract:
We report the controlled integration, via Dip Pen Nanolithography, of monolayer dots of ferritin-based CoO nanoparticles (12 Bohr magnetons) into the most sensitive areas of a microSQUID sensor. The nearly optimum flux coupling between these nanomagnets and the microSQUID improves the achievable sensitivity by a factor 100, enabling us to measure the linear susceptibility of the molecular array do…
▽ More
We report the controlled integration, via Dip Pen Nanolithography, of monolayer dots of ferritin-based CoO nanoparticles (12 Bohr magnetons) into the most sensitive areas of a microSQUID sensor. The nearly optimum flux coupling between these nanomagnets and the microSQUID improves the achievable sensitivity by a factor 100, enabling us to measure the linear susceptibility of the molecular array down to very low temperatures (13 mK). This method opens the possibility of applying ac susceptibility experiments to characterize two-dimensional arrays of single molecule magnets within a wide range of temperatures and frequencies.
△ Less
Submitted 27 September, 2011; v1 submitted 21 March, 2011;
originally announced March 2011.
-
Molecular prototypes for spin-based CNOT quantum gates
Authors:
F. Luis,
A. Repollés,
M. J. Martínez-Pérez,
D. Aguilà,
O. Roubeau,
D. Zueco,
M. Evangelisti,
A. Camón,
J. Sesé,
L. A. Barrios,
G. Aromí
Abstract:
We show that a chemically engineered structural asymmetry in [Tb2] molecular clusters renders the two weakly coupled Tb3+ spin qubits magnetically inequivalent. The magnetic energy level spectrum of these molecules meets then all conditions needed to realize a universal CNOT quantum gate.
We show that a chemically engineered structural asymmetry in [Tb2] molecular clusters renders the two weakly coupled Tb3+ spin qubits magnetically inequivalent. The magnetic energy level spectrum of these molecules meets then all conditions needed to realize a universal CNOT quantum gate.
△ Less
Submitted 15 March, 2011;
originally announced March 2011.