-
Modeling the effect of wind speed and direction shear on utility-scale wind turbine power production
Authors:
Storm A. Mata,
Juan José Pena MartÍnez,
Jesús Bas Quesada,
Felipe Palou Larrañaga,
Neeraj Yadav,
Jasvipul S. Chawla,
Varun Sivaram,
Michael F. Howland
Abstract:
Wind speed and direction variations across the rotor affect power production. As utility-scale turbines extend higher into the atmospheric boundary layer (ABL) with larger rotor diameters and hub heights, they increasingly encounter more complex wind speed and direction variations. We assess three models for power production that account for wind speed and direction shear. Two are based on actuato…
▽ More
Wind speed and direction variations across the rotor affect power production. As utility-scale turbines extend higher into the atmospheric boundary layer (ABL) with larger rotor diameters and hub heights, they increasingly encounter more complex wind speed and direction variations. We assess three models for power production that account for wind speed and direction shear. Two are based on actuator disc representations and the third is a blade element representation. We also evaluate the predictions from a standard power curve model that has no knowledge of wind shear. The predictions from each model, driven by wind profile measurements from a profiling LiDAR, are compared to concurrent power measurements from an adjacent utility-scale wind turbine. In the field measurements of the utility-scale turbine, discrete combinations of speed and direction shear induce changes in power production of -19% to +34% relative to the turbine power curve for a given hub height wind speed. Positive speed shear generally corresponds to over-performance and positive direction shear to under-performance, relative to the power curve. Overall, the blade element model produces both higher correlation and lower error relative to the other models, but its quantitative accuracy depends on induction and controller sub-models. To further assess the influence of complex, non-monotonic wind profiles, we also drive the models with best-fit power law wind speed profiles and linear wind direction profiles. These idealized inputs produce qualitative and quantitative differences in power predictions from each model, demonstrating that time-varying, non-monotonic wind shear affects wind power production.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Collective wind farm operation based on a predictive model increases utility-scale energy production
Authors:
Michael F. Howland,
Jesus Bas Quesada,
Juan Jose Pena Martinez,
Felipe Palou Larranaga,
Neeraj Yadav,
Jasvipul S. Chawla,
Varun Sivaram,
John O. Dabiri
Abstract:
Wind turbines located in wind farms are operated to maximize only their own power production. Individual operation results in wake losses that reduce farm energy. In this study, we operate a wind turbine array collectively to maximize total array production through wake steering. The selection of the farm control strategy relies on the optimization of computationally efficient flow models. We deve…
▽ More
Wind turbines located in wind farms are operated to maximize only their own power production. Individual operation results in wake losses that reduce farm energy. In this study, we operate a wind turbine array collectively to maximize total array production through wake steering. The selection of the farm control strategy relies on the optimization of computationally efficient flow models. We develop a physics-based, data-assisted flow control model to predict the optimal control strategy. In contrast to previous studies, we first design and implement a multi-month field experiment at a utility-scale wind farm to validate the model over a range of control strategies, most of which are suboptimal. The flow control model is able to predict the optimal yaw misalignment angles for the array within +/- 5 degrees for most wind directions (11-32% power gains). Using the validated model, we design a control protocol which increases the energy production of the farm in a second multi-month experiment by 2.7% and 1.0%, for the wind directions of interest and for wind speeds between 6 and 8 m/s and all wind speeds, respectively. The developed and validated predictive model can enable a wider adoption of collective wind farm operation.
△ Less
Submitted 26 January, 2022;
originally announced February 2022.
-
Influence of atmospheric conditions on the power production of utility-scale wind turbines in yaw misalignment
Authors:
Michael F. Howland,
Carlos Moral Gonzalez,
Juan Jose Pena Martinez,
Jesus Bas Quesada,
Felipe Palou Larranaga,
Neeraj K. Yadav,
Jasvipul S. Chawla,
John O. Dabiri
Abstract:
The intentional yaw misalignment of leading, upwind turbines in a wind farm, termed wake steering, has demonstrated potential as a collective control approach for wind farm power maximization. The optimal control strategy, and resulting effect of wake steering on wind farm power production, are in part dictated by the power degradation of the upwind yaw misaligned wind turbines. In the atmospheric…
▽ More
The intentional yaw misalignment of leading, upwind turbines in a wind farm, termed wake steering, has demonstrated potential as a collective control approach for wind farm power maximization. The optimal control strategy, and resulting effect of wake steering on wind farm power production, are in part dictated by the power degradation of the upwind yaw misaligned wind turbines. In the atmospheric boundary layer, the wind speed and direction may vary significantly over the wind turbine rotor area, depending on atmospheric conditions and stability, resulting in freestream turbine power production which is asymmetric as a function of the direction of yaw misalignment and which varies during the diurnal cycle. In this study, we propose a model for the power production of a wind turbine in yaw misalignment based on aerodynamic blade elements which incorporates the effects of wind speed and direction changes over the turbine rotor area in yaw misalignment. A field experiment is performed using multiple utility-scale wind turbines to characterize the power production of yawed freestream operating turbines depending on the wind conditions, and the model is validated using the experimental data. The resulting power production of a yaw misaligned variable speed wind turbine depends on a nonlinear interaction between the yaw misalignment, the atmospheric conditions, and the wind turbine control system.
△ Less
Submitted 3 August, 2020; v1 submitted 31 July, 2020;
originally announced August 2020.
-
Fabrication and characterization of aluminum SQUID transmission lines
Authors:
Luca Planat,
Ekaterina Al-Tavil,
Javier Puertas Martinez,
Remy Dassonneville,
Farshad Foroughi,
Sebastien Leger,
Karthik Bharadwaj,
Jovian Delaforce,
Vladimir Milchakov,
Cecile Naud,
Olivier Buisson,
Wiebke Hasch-Guichard,
Nicolas Roch
Abstract:
We report on the fabrication and characterization of 50 Ohms, flux-tunable, low-loss, SQUID-based transmission lines. The fabrication process relies on the deposition of a thin dielectric layer (few tens of nanometers) via Atomic Layer Deposition (ALD) on top of a SQUID array, the whole structure is then covered by a non-superconducting metallic top ground plane. We present experimental results fr…
▽ More
We report on the fabrication and characterization of 50 Ohms, flux-tunable, low-loss, SQUID-based transmission lines. The fabrication process relies on the deposition of a thin dielectric layer (few tens of nanometers) via Atomic Layer Deposition (ALD) on top of a SQUID array, the whole structure is then covered by a non-superconducting metallic top ground plane. We present experimental results from five different samples. We systematically characterize their microscopic parameters by measuring the propagating phase in these structures. We also investigate losses and discriminate conductor from dielectric losses. This fabrication method offers several advantages. First, the SQUID array fabrication does not rely on a Niobium tri-layer process but on a simpler double angle evaporation technique. Second, ALD provides high quality dielectric leading to low-loss devices. Further, the SQUID array fabrication is based on a standard, all-aluminum process, allowing direct integration with superconducting qubits. Moreover, our devices are in-situ flux tunable, allowing mitigation of incertitude inherent to any fabrication process. Finally, the unit cell being a single SQUID (no extra ground capacitance is needed), it is straightforward to modulate the size of the unit cell periodically, allowing band-engineering. This fabrication process can be directly applied to traveling wave parametric amplifiers.
△ Less
Submitted 23 July, 2019;
originally announced July 2019.
-
A photonic crystal Josephson traveling wave parametric amplifier
Authors:
Luca Planat,
Arpit Ranadive,
Remy Dassonneville,
Javier Puertas Martinez,
Sebastien Leger,
Cecile Naud,
Olivier Buisson,
Wiebke Hasch-Guichard,
Denis M. Basko,
Nicolas Roch
Abstract:
An amplifier combining noise performances as close as possible to the quantum limit with large bandwidth and high saturation power is highly desirable for many solid state quantum technologies such as high fidelity qubit readout or high sensitivity electron spin resonance for example. Here we introduce a new Traveling Wave Parametric Amplifier based on Superconducting QUantum Interference Devices.…
▽ More
An amplifier combining noise performances as close as possible to the quantum limit with large bandwidth and high saturation power is highly desirable for many solid state quantum technologies such as high fidelity qubit readout or high sensitivity electron spin resonance for example. Here we introduce a new Traveling Wave Parametric Amplifier based on Superconducting QUantum Interference Devices. It displays a 3 GHz bandwidth, a -102 dBm 1-dB compression point and added noise near the quantum limit. Compared to previous state-of-the-art, it is an order of magnitude more compact, its characteristic impedance is in-situ tunable and its fabrication process requires only two lithography steps. The key is the engineering of a gap in the dispersion relation of the transmission line. This is obtained using a periodic modulation of the SQUID size, similarly to what is done with photonic crystals. Moreover, we provide a new theoretical treatment to describe the non-trivial interplay between non-linearity and such periodicity. Our approach provides a path to co-integration with other quantum devices such as qubits given the low footprint and easy fabrication of our amplifier.
△ Less
Submitted 18 October, 2019; v1 submitted 23 July, 2019;
originally announced July 2019.
-
Understanding the saturation power of Josephson Parametric Amplifiers made from SQUIDs arrays
Authors:
Luca Planat,
Remy Dassonneville,
Javier Puertas Martinez,
Farshad Foroughi,
Olivier Buisson,
Wiebke Hasch-Guichard,
Cecile Naud,
R. Vijay,
Kater Murch,
Nicolas Roch
Abstract:
We report on the implementation and detailed modelling of a Josephson Parametric Amplifier (JPA) made from an array of eighty Superconducting QUantum Interference Devices (SQUIDs), forming a non-linear quarter-wave resonator. This device was fabricated using a very simple single step fabrication process. It shows a large bandwidth (45 MHz), an operating frequency tunable between 5.9 GHz and 6.8 GH…
▽ More
We report on the implementation and detailed modelling of a Josephson Parametric Amplifier (JPA) made from an array of eighty Superconducting QUantum Interference Devices (SQUIDs), forming a non-linear quarter-wave resonator. This device was fabricated using a very simple single step fabrication process. It shows a large bandwidth (45 MHz), an operating frequency tunable between 5.9 GHz and 6.8 GHz and a large input saturation power (-117 dBm) when biased to obtain 20 dB of gain. Despite the length of the SQUID array being comparable to the wavelength, we present a model based on an effective non-linear LC series resonator that quantitatively describes these figures of merit without fitting parameters. Our work illustrates the advantage of using array-based JPA since a single-SQUID device showing the same bandwidth and resonant frequency would display a saturation power 15 dB lower.
△ Less
Submitted 3 April, 2019; v1 submitted 22 September, 2018;
originally announced September 2018.
-
Quantum probe of an on-chip broadband interferometer for quantum microwave photonics
Authors:
P. Eder,
T. Ramos,
J. Goetz,
M. Fischer,
S. Pogorzalek,
J. Puertas Martínez,
E. P. Menzel,
F. Loacker,
E. Xie,
J. J. Garcia-Ripoll,
K. G. Fedorov,
A. Marx,
F. Deppe,
R. Gross
Abstract:
Quantum microwave photonics aims at generating, routing, and manipulating propagating quantum microwave fields in the spirit of optical photonics. To this end, the strong nonlinearities of superconducting quantum circuits can be used to either improve or move beyond the implementation of concepts from the optical domain. In this context, the design of a well-controlled broadband environment for th…
▽ More
Quantum microwave photonics aims at generating, routing, and manipulating propagating quantum microwave fields in the spirit of optical photonics. To this end, the strong nonlinearities of superconducting quantum circuits can be used to either improve or move beyond the implementation of concepts from the optical domain. In this context, the design of a well-controlled broadband environment for the superconducting quantum circuits is a central task. In this work, we place a superconducting transmon qubit in one arm of an on-chip Mach-Zehnder interferometer composed of two superconducting microwave beam splitters. By measuring its relaxation and dephasing rates we use the qubit as a sensitive spectrometer at the quantum level to probe the broadband electromagnetic environment. At high frequencies, this environment can be well described by an ensemble of harmonic oscillators coupled to the transmon qubit. At low frequencies, we find experimental evidence for colored quasi-static Gaussian noise with a high spectral weight, as it is typical for ensembles of two-level fluctuators. Our work paves the way towards possible applications of propagating microwave photons, such as emulating quantum impurity models or a novel architecture for quantum information processing.
△ Less
Submitted 4 October, 2018; v1 submitted 22 May, 2018;
originally announced May 2018.
-
A tunable Josephson platform to explore many-body quantum optics in circuit-QED
Authors:
Javier Puertas Martinez,
Sebastien Leger,
Nicolas Gheeraert,
Remy Dassonneville,
Luca Planat,
Farshad Foroughi,
Yuriy Krupko,
Olivier Buisson,
Cecile Naud,
Wiebke Guichard,
Serge Florens,
Izak Snyman,
Nicolas Roch
Abstract:
Coupling an isolated emitter to a single mode of the electromagnetic field is now routinely achieved and well understood. Current efforts aim to explore the coherent dynamics of emitters coupled to several electromagnetic modes (EM). freedom. Recently, ultrastrong coupling to a transmission line has been achieved where the emitter resonance broadens to a significant fraction of its frequency. In t…
▽ More
Coupling an isolated emitter to a single mode of the electromagnetic field is now routinely achieved and well understood. Current efforts aim to explore the coherent dynamics of emitters coupled to several electromagnetic modes (EM). freedom. Recently, ultrastrong coupling to a transmission line has been achieved where the emitter resonance broadens to a significant fraction of its frequency. In this work we gain significantly improved control over this regime. We do so by combining the simplicity of a transmon qubit and a bespoke EM environment with a high density of discrete modes, hosted inside a superconducting metamaterial. This produces a unique device in which the hybridisation between the qubit and up to 10 environmental modes can be monitored directly. Moreover the frequency and broadening of the qubit resonance can be tuned independently of each other in situ. We experimentally demonstrate that our device combines this tunability with ultrastrong coupling and a qubit nonlinearity comparable to the other relevant energy scales in the system. We also develop a quantitative theoretical description that does not contain any phenomenological parameters and that accurately takes into account vacuum fluctuations of our large scale quantum circuit in the regime of ultrastrong coupling and intermediate non-linearity. The demonstration of this new platform combined with a quantitative modelling brings closer the prospect of experimentally studying many-body effects in quantum optics. A limitation of the current device is the intermediate nonlinearity of the qubit. Pushing it further will induce fully developed many-body effects, such as a giant Lamb shift or nonclassical states of multimode optical fields. Observing such effects would establish interesting links between quantum optics and the physics of quantum impurities.
△ Less
Submitted 9 April, 2019; v1 submitted 2 February, 2018;
originally announced February 2018.
-
Second-order decoherence mechanisms of a transmon qubit probed with thermal microwave states
Authors:
J. Goetz,
F. Deppe,
P. Eder,
M. Fischer,
M. Müting,
J. P. Martínez,
S. Pogorzalek,
F. Wulschner,
E. Xie,
K. G. Fedorov,
A. Marx,
R. Gross
Abstract:
Thermal microwave states are omnipresent noise sources in superconducting quantum circuits covering all relevant frequency regimes. We use them as a probe to identify three second-order decoherence mechanisms of a superconducting transmon. First, we quantify the efficiency of a resonator filter in the dispersive Jaynes-Cummings regime and find evidence for parasitic loss channels. Second, we probe…
▽ More
Thermal microwave states are omnipresent noise sources in superconducting quantum circuits covering all relevant frequency regimes. We use them as a probe to identify three second-order decoherence mechanisms of a superconducting transmon. First, we quantify the efficiency of a resonator filter in the dispersive Jaynes-Cummings regime and find evidence for parasitic loss channels. Second, we probe second-order noise in the low-frequency regime and demonstrate the expected $T^{3}$ temperature dependence of the qubit dephasing rate. Finally, we show that qubit parameter fluctuations due to two-level states are enhanced under the influence of thermal microwave states. In particular, we experimentally confirm the $T^{2}$-dependence of the fluctuation spectrum expected for noninteracting two-level states.
△ Less
Submitted 11 April, 2017; v1 submitted 23 September, 2016;
originally announced September 2016.
-
An Ontology-based Context Aware System for Selective Dissemination of Information in a Digital Library
Authors:
Marisa R. De Giusti,
Gonzalo L. Villarreal,
Agustín Vosou,
Juan P. Martínez
Abstract:
Users of Institutional Repositories and Digital Libraries are known by their needs for very specific information about one or more subjects. To characterize users profiles and offer them new documents and resources is one of the main challenges of today's libraries. In this paper, a Selective Dissemination of Information service is described, which proposes an Ontology-based Context Aware system f…
▽ More
Users of Institutional Repositories and Digital Libraries are known by their needs for very specific information about one or more subjects. To characterize users profiles and offer them new documents and resources is one of the main challenges of today's libraries. In this paper, a Selective Dissemination of Information service is described, which proposes an Ontology-based Context Aware system for identifying user's context (research subjects, work team, areas of interest). This system enables librarians to broaden users profiles beyond the information that users have introduced by hand (such as institution, age and language). The system requires a context retrieval layer to capture user information and behavior, and an inference engine to support context inference from many information sources (selected documents and users' queries).
△ Less
Submitted 21 May, 2010;
originally announced May 2010.
