Showing 1–50 of 267 results for author: Martínez, E

Enhancing Irradiation Resistance in Refractory Medium Entropy Alloys with Simplified Chemistry

Authors: M. A. Tunes, D. Parkison, B. Sun, P. Willenshofer, S. Samberger, B. K. Derby, J. K. S. Baldwin, S. J. Fensin, D. Sobieraj, J. S. Wróbel, J. Byggmästar, S. Pogatscher, E. Martinez, D. Nguyen-Manh, O. El-Atwani

Abstract: Refractory High-Entropy Alloys (RHEAs) hold promising potential to be used as structural materials in future nuclear fusion reactors, where W and its alloys are currently leading candidates. Fusion materials must be able to withstand extreme conditions, such as (i) severe radiation-damage arising from highly-energetic neutrons, (ii) embrittlement caused by implantation of H and He ions, and (iii)… ▽ More Refractory High-Entropy Alloys (RHEAs) hold promising potential to be used as structural materials in future nuclear fusion reactors, where W and its alloys are currently leading candidates. Fusion materials must be able to withstand extreme conditions, such as (i) severe radiation-damage arising from highly-energetic neutrons, (ii) embrittlement caused by implantation of H and He ions, and (iii) exposure to extreme high-temperatures and thermal gradients. Recent research demonstrated that two RHEAs - the WTaCrV and WTaCrVHf - can outperform both coarse-grained and nanocrystalline W in terms of its radiation response and microstructural stability. Chemical complexity and nanocrystallinity enhance the radiation tolerance of these new RHEAs, but their multi-element nature, including low-melting Cr, complicates bulk fabrication and limits practical applications. We demonstrate that reducing the number of alloying elements and yet retain high-radiation tolerance is possible within the ternary system W-Ta-V via synthesis of two novel nanocrystalline refractory medium-entropy alloys (RMEAs): the W$_{53}$Ta$_{44}$V$_{3}$ and W$_{53}$Ta$_{42}$V$_{5}$ (in at.\%). We experimentally show that the radiation response of the W-Ta-V system can be tailored by small additions of V, and such experimental result was validated with theoretical analysis of chemical short-range orders (CSRO) from combined ab-initio atomistic Monte-Carlo modeling. It is predicted from computational analysis that a small change in V concentration has a significant effect on the Ta-V CRSO between W$_{53}$Ta$_{44}$V$_{3}$ and W$_{53}$Ta$_{42}$V$_{5}$ leading to radiation-resistant microstructures in these RMEAs from chemistry stand-point of views. We deviate from the original high-entropy alloy concept to show that high radiation resistance can be achieved in systems with simplified chemical complexity. △ Less

Submitted 21 June, 2024; originally announced June 2024.

ST-Gait++: Leveraging spatio-temporal convolutions for gait-based emotion recognition on videos

Authors: Maria Luísa Lima, Willams de Lima Costa, Estefania Talavera Martinez, Veronica Teichrieb

Abstract: Emotion recognition is relevant for human behaviour understanding, where facial expression and speech recognition have been widely explored by the computer vision community. Literature in the field of behavioural psychology indicates that gait, described as the way a person walks, is an additional indicator of emotions. In this work, we propose a deep framework for emotion recognition through the… ▽ More Emotion recognition is relevant for human behaviour understanding, where facial expression and speech recognition have been widely explored by the computer vision community. Literature in the field of behavioural psychology indicates that gait, described as the way a person walks, is an additional indicator of emotions. In this work, we propose a deep framework for emotion recognition through the analysis of gait. More specifically, our model is composed of a sequence of spatial-temporal Graph Convolutional Networks that produce a robust skeleton-based representation for the task of emotion classification. We evaluate our proposed framework on the E-Gait dataset, composed of a total of 2177 samples. The results obtained represent an improvement of approximately 5% in accuracy compared to the state of the art. In addition, during training we observed a faster convergence of our model compared to the state-of-the-art methodologies. △ Less

Submitted 22 May, 2024; originally announced May 2024.

Comments: Accepted for publication in the LXCV Workshop @ CVPR 2024

Comment on "Recovering noise-free quantum observables"

Authors: Josu Etxezarreta Martinez, Olatz Sanz Larrarte, Javier Oliva del Moral, Reza Dastbasteh, Ruben M. Otxoa

Abstract: Zero-noise extrapolation (ZNE) stands as the most widespread quantum error mitigation technique in order to aim the recovery of noise-free expectation values of observables of interest by means of Noisy Intermediate-Scale Quantum (NISQ) machines. Recently, Otten and Gray proposed a multidimensional generalization of poynomial ZNE for systems where there is not a tunable global noise source [Phys.… ▽ More Zero-noise extrapolation (ZNE) stands as the most widespread quantum error mitigation technique in order to aim the recovery of noise-free expectation values of observables of interest by means of Noisy Intermediate-Scale Quantum (NISQ) machines. Recently, Otten and Gray proposed a multidimensional generalization of poynomial ZNE for systems where there is not a tunable global noise source [Phys. Rev. A \textbf{99,} 012338 (2019)]. Specifically, the authors refer to multiqubit systems where each of the qubits experiences several noise processes with different rates, i.e. a non-identically distributed noise model. While effective, the proposed method presents an unbearable experiment repetition overhead, making it impractical, at least from the perspective of quantum computing. In this comment, we show that the traditional extrapolation techniques can be applied for such non-identically distributed noise setting consisted of many different noise sources, implying that the measurement overhead is reduced considerably. For doing so, we clarify what it is meant by a tunable global noise source in the context of ZNE, concept that we consider important to be clarified for a correct understanding about how and why these methods work. △ Less

Submitted 26 March, 2024; originally announced May 2024.

Comments: 5 pages, 1 figure; comment on arXiv:1806.07860

Melnikov Method for Perturbed Completely Integrable Systems

Authors: F. Crespo, M. Uribe, E. Martínez

Abstract: We consider a completely integrable system of differential equations in arbitrary dimensions whose phase space contains an open set foliated by periodic orbits. This research analyzes the persistence and stability of the periodic orbits under a nonlinear periodic perturbation. For this purpose, we use the Melnikov method and Floquet theory to establish conditions for the existence and stability of… ▽ More We consider a completely integrable system of differential equations in arbitrary dimensions whose phase space contains an open set foliated by periodic orbits. This research analyzes the persistence and stability of the periodic orbits under a nonlinear periodic perturbation. For this purpose, we use the Melnikov method and Floquet theory to establish conditions for the existence and stability of periodic orbits. Our approach considers periods of the unperturbed orbits depending on the integrals and constant periods. In the applications, we deal with both cases. Precisely, we study the existence of periodic orbits in a perturbed generalized Euler system. In the degenerate case, we analyze the existence and stability of periodic orbits for a perturbed harmonic oscillator. △ Less

Submitted 16 April, 2024; originally announced April 2024.

Grain boundary metastability controls irradiation resistance in nanocrystalline metals

Authors: Osman El-Atwani, Annie K. Barnett, Enrique Martinez, Jian Han, Asher C. Leff, Chang-Yu Hung, James E. Nathaniel, Sicong He, Emily H. Mang, Larissa M. Woryk, Khalid Hattar, Blas P. Uberuaga, David J. Srolovitz, Michael L. Falk, Jaime Marian, Mitra L. Taheri

Abstract: Grain boundaries (GBs) in polycrystalline materials are powerful sinks for irradiation defects. While standard theories assume that the sink efficiency of a grain boundary is defined solely by its character before irradiation, recent evidence conclusively shows that the irradiation sink efficiency is a highly dynamic property controlled by the intrinsic metastability of GBs under far-from-equilibr… ▽ More Grain boundaries (GBs) in polycrystalline materials are powerful sinks for irradiation defects. While standard theories assume that the sink efficiency of a grain boundary is defined solely by its character before irradiation, recent evidence conclusively shows that the irradiation sink efficiency is a highly dynamic property controlled by the intrinsic metastability of GBs under far-from-equilibrium irradiation conditions. In this paper, we reveal that the denuded (i.e., defect-free) zone, typically the signature of a strong sink, can collapse as irradiation damage accumulates. We propose a radiation damage evolution model that captures this behavior based on the emergence of a series of irradiation defect-enabled metastable GB microstate changes that dynamically alter the ability of the GB to absorb further damage. We show that these microstate changes control further defect absorption and give rise to the formation of a defect network that manifests itself as a net Nye-tensor signal detectable via lattice curvature experiments. △ Less

Submitted 15 April, 2024; originally announced April 2024.

Data-Driven Modeling of Dislocation Mobility from Atomistics using Physics-Informed Machine Learning

Authors: Yifeng Tian, Soumendu Bagchi, Liam Myhill, Giacomo Po, Enrique Martinez, Yen Ting Lin, Nithin Mathew, Danny Perez

Abstract: Dislocation mobility, which dictates the response of dislocations to an applied stress, is a fundamental property of crystalline materials that governs the evolution of plastic deformation. Traditional approaches for deriving mobility laws rely on phenomenological models of the underlying physics, whose free parameters are in turn fitted to a small number of intuition-driven atomic scale simulatio… ▽ More Dislocation mobility, which dictates the response of dislocations to an applied stress, is a fundamental property of crystalline materials that governs the evolution of plastic deformation. Traditional approaches for deriving mobility laws rely on phenomenological models of the underlying physics, whose free parameters are in turn fitted to a small number of intuition-driven atomic scale simulations under varying conditions of temperature and stress. This tedious and time-consuming approach becomes particularly cumbersome for materials with complex dependencies on stress, temperature, and local environment, such as body-centered cubic crystals (BCC) metals and alloys. In this paper, we present a novel, uncertainty quantification-driven active learning paradigm for learning dislocation mobility laws from automated high-throughput large-scale molecular dynamics simulations, using Graph Neural Networks (GNN) with a physics-informed architecture. We demonstrate that this Physics-informed Graph Neural Network (PI-GNN) framework captures the underlying physics more accurately compared to existing phenomenological mobility laws in BCC metals. △ Less

Submitted 20 March, 2024; originally announced March 2024.

Interlayer Dzyaloshinskii-Moriya interaction in synthetic ferrimagnets

Authors: Shen Li, Mouad Fattouhi, Tianxun Huang, Chen Lv, Mark C. H. de Jong, **zhi Li, Xiaoyang Lin, Felipe Garcia-Sanchez, Eduardo Martinez, Stéphane Mangin, Bert Koopmans, Weisheng Zhao, Reinoud Lavrijsen

Abstract: The antisymmetric interlayer exchange interaction, i.e., interlayer Dzyaloshinskii-Moriya interaction (IL-DMI) has attracted significant interest since this long-range chiral spin interaction provides a new dimension for controlling spin textures and dynamics. However, the role of IL-DMI in the field induced and spin-orbit torque (SOT) induced switching of synthetic ferrimagnets (SFi) has not been… ▽ More The antisymmetric interlayer exchange interaction, i.e., interlayer Dzyaloshinskii-Moriya interaction (IL-DMI) has attracted significant interest since this long-range chiral spin interaction provides a new dimension for controlling spin textures and dynamics. However, the role of IL-DMI in the field induced and spin-orbit torque (SOT) induced switching of synthetic ferrimagnets (SFi) has not been uncovered. Here, we exploit interlayer chiral exchange bias fields in SFi to address both the sign and magnitude of the IL-DMI. Depending on the degree of imbalance between the two magnetic moments of the SFi, the amount of asymmetry, addressed via loop shifts of the hysteresis loops under an in-plane field reveals a unidirectional and chiral nature of the IL-DMI. The devices are then tested with SOT switching experiments and the process is examined via both transient state and steady state detection. In addition to field-free SOT switching, we find that the combination of IL-DMI and SOT give rise to multi-resistance states, which provides a possible direction for the future design of neuromorphic computing devices based on SOT. This work is a step towards characterizing and understanding the IL-DMI for spintronic applications. △ Less

Submitted 19 March, 2024; originally announced March 2024.

Comments: no

MSC Class: no

Stochastic Integration of the Cahn-Hilliard Phase Field Equations

Authors: Qianran Yu, Nicholas Julian, Jaime Marian, Enrique Martinez

Abstract: In this work we develop a stochastic algorithm to integrate the Cahn-Hilliard equations. The algorithm is based on Gillespie's stochastic simulation algorithm, also known as kinetic Monte Carlo. The deterministic integration of the phase field equations leads to the closest minimum of free energy and does not overcome free energy barriers. However, in the nucleation and growth regime of the phase… ▽ More In this work we develop a stochastic algorithm to integrate the Cahn-Hilliard equations. The algorithm is based on Gillespie's stochastic simulation algorithm, also known as kinetic Monte Carlo. The deterministic integration of the phase field equations leads to the closest minimum of free energy and does not overcome free energy barriers. However, in the nucleation and growth regime of the phase diagram, free energy barriers need to be thermally overcome for the system to phase separate to reach equilibrium. We show in this work that the proposed stochastic integration algorithm indeed allows the system to overcome free energy barriers. We discuss the results in terms of fluctuation distributions, grid sizes and efficiency. △ Less

Submitted 12 February, 2024; originally announced February 2024.

Langmuir-like model of dilute impurities in concentrated solid solutions

Authors: Jacob Jeffries, Enrique Martinez

Abstract: High-entropy alloys have drawn recent interest for their promising mechanical properties and irradiation resistance. Various properties, namely transport properties, are controlled by point defect concentration, which must be known before performing atomistic simulations to compute transport coefficients. In this work, we present a general Langmuir-like model for impurity concentration in an arbit… ▽ More High-entropy alloys have drawn recent interest for their promising mechanical properties and irradiation resistance. Various properties, namely transport properties, are controlled by point defect concentration, which must be known before performing atomistic simulations to compute transport coefficients. In this work, we present a general Langmuir-like model for impurity concentration in an arbitrarily complex solid solution and apply this model to generate expressions for concentrations of vacancies and small interstitial atoms. We then calculate the vacancy concentration as a function of temperature in the equiatomic CoNiCrFeMn and FeAl alloys with modified embedded-atom-method potentials for various chemical orderings, showing there is no clear correlation between vacancy thermodynamics and chemical ordering in the CoNiCrFeMn alloy but clear systematic patterns for FeAl. △ Less

Submitted 11 February, 2024; originally announced February 2024.

Comments: 13 pages, 6 figures

The closed-branch decoder for quantum LDPC codes

Authors: Antonio deMarti iOlius, Josu Etxezarreta Martinez

Abstract: Quantum error correction is the building block for constructing fault-tolerant quantum processors that can operate reliably even if its constituting elements are corrupted by decoherence. In this context, real-time decoding is a necessity for implementing arbitrary quantum computations on the logical level. In this work, we present a new decoder for Quantum Low Density Parity Check (QLDPC) codes,… ▽ More Quantum error correction is the building block for constructing fault-tolerant quantum processors that can operate reliably even if its constituting elements are corrupted by decoherence. In this context, real-time decoding is a necessity for implementing arbitrary quantum computations on the logical level. In this work, we present a new decoder for Quantum Low Density Parity Check (QLDPC) codes, named the closed-branch decoder, with a worst-case complexity loosely upper bounded by $\mathcal{O}(n\text{max}_{\text{gr}}\text{max}_{\text{br}})$, where $\text{max}_{\text{gr}}$ and $\text{max}_{\text{br}}$ are tunable parameters that pose the accuracy versus speed trade-off of decoding algorithms. For the best precision, the $\text{max}_{\text{gr}}\text{max}_{\text{br}}$ product increases exponentially as $\propto dj^d$, where $d$ indicates the distance of the code and $j$ indicates the average row weight of its parity check matrix. Nevertheless, we numerically show that considering small values that are polynomials of the code distance are enough for good error correction performance. The decoder is described to great extent and compared with the Belief Propagation Ordered Statistics Decoder (BPOSD) operating over data qubit, phenomenological and circuit-level noise models for the class of Bivariate Bicycle (BB) codes. The results showcase a promising performance of the decoder, obtaining similar results with much lower complexity than BPOSD when considering the smallest distance codes, but experiencing some logical error probability degradation for the larger ones. Ultimately, the performance and complexity of the decoder depends on the product $\text{max}_{\text{gr}}\text{max}_{\text{br}}$, which can be considered taking into account benefiting one of the two aspects at the expense of the other. △ Less

Submitted 14 February, 2024; v1 submitted 2 February, 2024; originally announced February 2024.

Comments: 16 pages, 11 figures

Current-Driven Domain Wall Motion in Curved Ferrimagnetic Strips Above and Below the Angular Momentum Compensation

Authors: David Osuna Ruiz, Óscar Alejos, Víctor Raposo, Eduardo Martínez

Abstract: Current driven domain wall motion in curved Heavy Metal/Ferrimagnetic/Oxide multilayer strips is investigated using systematic micromagnetic simulations which account for spin-orbit coupling phenomena. Domain wall velocity and characteristic relaxation times are studied as functions of the geometry, curvature and width of the strip, at and out of the angular momentum compensation. Results show tha… ▽ More Current driven domain wall motion in curved Heavy Metal/Ferrimagnetic/Oxide multilayer strips is investigated using systematic micromagnetic simulations which account for spin-orbit coupling phenomena. Domain wall velocity and characteristic relaxation times are studied as functions of the geometry, curvature and width of the strip, at and out of the angular momentum compensation. Results show that domain walls can propagate faster and without a significant distortion in such strips in contrast to their ferromagnetic counterparts. Using an artificial system based on a straight strip with an equivalent current density distribution, we can discern its influence on the wall terminal velocity, as part of a more general geometrical influence due to the curved shape. Curved and narrow ferrimagnetic strips are promising candidates for designing high speed and fast response spintronic circuitry based on current-driven domain wall motion. △ Less

Submitted 24 January, 2024; originally announced January 2024.

Journal ref: Front. Phys. 9:772264 (2021)

Geometrical design for pure current-driven domain wall nucleation and shifting

Authors: David Osuna Ruiz, Óscar Alejos, Víctor Raposo, Eduardo Martínez

Abstract: Nucleation of domain walls by current-driving a single domain wall, confined to the junction area of two symmetrical strips, is investigated using systematic micromagnetic simulations. Secondary domain walls (equivalently, bits encoded in domains) are simultaneously nucleated and driven by alternatively applying current pulses between two terminals in the structure. Simulations show that nanosecon… ▽ More Nucleation of domain walls by current-driving a single domain wall, confined to the junction area of two symmetrical strips, is investigated using systematic micromagnetic simulations. Secondary domain walls (equivalently, bits encoded in domains) are simultaneously nucleated and driven by alternatively applying current pulses between two terminals in the structure. Simulations show that nanosecond-duration current pulses nucleate and drive series of robust up/down domains even under realistic conditions. These results demonstrate a technique for sequentially nucleating and shifting domain walls without using attached external bit lines, fields or modifying the ferromagnetic strip. △ Less

Submitted 24 January, 2024; originally announced January 2024.

Comments: 11 pages, 3 figures

Journal ref: Appl. Phys. Lett. 121, 102403 (2022)

Environmental impacts, nutritional profiles, and retail prices of commonly sold retail food items in 181 countries: an observational study

Authors: Elena M. Martinez, Nicole Tichenor Blackstone, Parke E. Wilde, Anna W. Herforth, William A. Masters

Abstract: Affordability is often seen as a barrier to consuming sustainable diets. This study provides the first worldwide test of how retail food prices relate to empirically estimated environmental impacts and nutritional profile scores between and within food groups. We use prices for 811 retail food items commonly sold in 181 countries during 2011 and 2017, matched to estimated carbon and water footprin… ▽ More Affordability is often seen as a barrier to consuming sustainable diets. This study provides the first worldwide test of how retail food prices relate to empirically estimated environmental impacts and nutritional profile scores between and within food groups. We use prices for 811 retail food items commonly sold in 181 countries during 2011 and 2017, matched to estimated carbon and water footprints and nutritional profiles, to test whether healthier and more environmentally sustainable foods are more expensive between and within food groups. We find that within almost all groups, less expensive items have significantly lower carbon and water footprints. Associations are strongest for animal source foods, where each 10% lower price is associated with 20 grams lower CO2-equivalent carbon and 5 liters lower water footprint per 100kcal. Gradients between price and nutritional profile vary by food group, price range, and nutritional attribute. In contrast, lower-priced items have lower nutritional value in only some groups over some price ranges, and that relationship is sometimes reversed. These findings reveal opportunities to reduce financial and environmental costs of diets, contributing to transitions towards healthier, more environmentally sustainable food systems. △ Less

Submitted 23 January, 2024; originally announced January 2024.

Interferometric Single-Shot Parity Measurement in an InAs-Al Hybrid Device

Authors: Morteza Aghaee, Alejandro Alcaraz Ramirez, Zulfi Alam, Rizwan Ali, Mariusz Andrzejczuk, Andrey Antipov, Mikhail Astafev, Amin Barzegar, Bela Bauer, Jonathan Becker, Umesh Kumar Bhaskar, Alex Bocharov, Srini Boddapati, David Bohn, Jouri Bommer, Leo Bourdet, Arnaud Bousquet, Samuel Boutin, Lucas Casparis, Benjamin James Chapman, Sohail Chatoor, Anna Wulff Christensen, Cassandra Chua, Patrick Codd, William Cole , et al. (137 additional authors not shown)

Abstract: The fusion of non-Abelian anyons or topological defects is a fundamental operation in measurement-only topological quantum computation. In topological superconductors, this operation amounts to a determination of the shared fermion parity of Majorana zero modes. As a step towards this, we implement a single-shot interferometric measurement of fermion parity in indium arsenide-aluminum heterostruct… ▽ More The fusion of non-Abelian anyons or topological defects is a fundamental operation in measurement-only topological quantum computation. In topological superconductors, this operation amounts to a determination of the shared fermion parity of Majorana zero modes. As a step towards this, we implement a single-shot interferometric measurement of fermion parity in indium arsenide-aluminum heterostructures with a gate-defined nanowire. The interferometer is formed by tunnel-coupling the proximitized nanowire to quantum dots. The nanowire causes a state-dependent shift of these quantum dots' quantum capacitance of up to 1 fF. Our quantum capacitance measurements show flux h/2e-periodic bimodality with a signal-to-noise ratio of 1 in 3.7 $μ$s at optimal flux values. From the time traces of the quantum capacitance measurements, we extract a dwell time in the two associated states that is longer than 1 ms at in-plane magnetic fields of approximately 2 T. These results are consistent with a measurement of the fermion parity encoded in a pair of Majorana zero modes that are separated by approximately 3 $μ$m and subjected to a low rate of poisoning by non-equilibrium quasiparticles. The large capacitance shift and long poisoning time enable a parity measurement error probability of 1%. △ Less

Submitted 2 April, 2024; v1 submitted 17 January, 2024; originally announced January 2024.

Comments: Added data on a second measurement of device A and a measurement of device B, expanded discussion of a trivial scenario. Refs added, author list updated

Spin Waves in Ferrimagnets near the Angular Magnetization Compensation Temperature: A Micromagnetic Study

Authors: Luis Sánchez-Tejerina, David Osuna Ruiz, Eduardo Martínez, Luis López Díaz, Óscar Alejos

Abstract: Spin wave propagation along a ferrimagnetic strip with out-of-plane magnetization is studied by means of micromagnetic simulations. The ferrimagnetic material is considered as formed by two antiferromagnetically coupled sublattices. Two critical temperatures can be defined for such systems: that of magnetization compensation and that of angular momentum compensation, both different due to distinct… ▽ More Spin wave propagation along a ferrimagnetic strip with out-of-plane magnetization is studied by means of micromagnetic simulations. The ferrimagnetic material is considered as formed by two antiferromagnetically coupled sublattices. Two critical temperatures can be defined for such systems: that of magnetization compensation and that of angular momentum compensation, both different due to distinct Landé factors for each sub-lattice. Spin waves in the strip are excited by a spin current injected at one of its edges. The obtained dispersion diagrams show exchange-dominated forward volume spin waves. For a given excitation frequency, Néel vector describes highly eccentric orbits, the eccentricity depending on temperature, whose semi-major axis are oriented differently at distinct locations on the FiM strip. △ Less

Submitted 16 January, 2024; originally announced January 2024.

Comments: 10 pages, 4 figures, presented at JEMS 2023

From anti-Arrhenius to Arrhenius behavior in a dislocation-obstacle bypass: Atomistic Simulations and Theoretical Investigation

Authors: Mohammadhossein Nahavandian, Soumit Sarkar, Soumendu Bagchi, Danny Perez, Enrique Martinez

Abstract: Dislocations are the primary carriers of plasticity in metallic material. Understanding the basic mechanisms for dislocation movement is paramount to predicting the material mechanical response. Relying on atomistic simulations, we observe a transition from non-Arrhenius to Arrhenius behavior in the rate for an edge dislocation to overcome the elastic interaction with a prismatic loop in tungsten.… ▽ More Dislocations are the primary carriers of plasticity in metallic material. Understanding the basic mechanisms for dislocation movement is paramount to predicting the material mechanical response. Relying on atomistic simulations, we observe a transition from non-Arrhenius to Arrhenius behavior in the rate for an edge dislocation to overcome the elastic interaction with a prismatic loop in tungsten. Beyond the critical resolved shear stress, the process shows a non-Arrhenius behavior at low temperatures. However, as the temperature increases, the activation entropy starts to dominate, leading to a traditional Arrhenius behavior. We have computed the activation entropy analytically along the minimum energy path following Schoeck's methods [1], which capture the cross-over between anti-Arrhenius and Arrhenius domains. Also, the Projected Average Force Integrator (PAFI) [2], another simulation method to compute free energies along an initial transition path, exhibits considerable concurrence with Schoeck's formalism. We conclude that entropic effects need to be considered to understand processes involving dislocations bypassing elastic barriers close to the critical resolved shear stress. More work needs to be performed to fully understand the discrepancies between Schoeck's and PAFI results compared to molecular dynamics. △ Less

Submitted 14 March, 2024; v1 submitted 8 January, 2024; originally announced January 2024.

Report number: ISSN 0927-0256

Journal ref: Computational Materials Science, 239 (2024), 112954

Cybersecurity in Critical Infrastructures: A Post-Quantum Cryptography Perspective

Authors: Javier Oliva del Moral, Antonio deMarti iOlius, Gerard Vidal, Pedro M. Crespo, Josu Etxezarreta Martinez

Abstract: The machinery of industrial environments was connected to the Internet years ago with the scope of increasing their performance. However, this change made such environments vulnerable against cyber-attacks that can compromise their correct functioning resulting in economic or social problems. Moreover, implementing cryptosystems in the communications between operational technology (OT) devices is… ▽ More The machinery of industrial environments was connected to the Internet years ago with the scope of increasing their performance. However, this change made such environments vulnerable against cyber-attacks that can compromise their correct functioning resulting in economic or social problems. Moreover, implementing cryptosystems in the communications between operational technology (OT) devices is a more challenging task than for information technology (IT) environments since the OT networks are generally composed of legacy elements, characterized by low-computational capabilities. Consequently, implementing cryptosystems in industrial communication networks faces a trade-off between the security of the communications and the amortization of the industrial infrastructure. Critical Infrastructure (CI) refers to the industries which provide key resources for the daily social and economical development, e.g. electricity. Furthermore, a new threat to cybersecurity has arisen with the theoretical proposal of quantum computers, due to their potential ability of breaking state-of-the-art cryptography protocols, such as RSA or ECC. Many global agents have become aware that transitioning their secure communications to a quantum secure paradigm is a priority that should be established before the arrival of fault-tolerance. In this paper, we aim to describe the problematic of implementing post-quantum cryptography (PQC) to CI environments. For doing so, we describe the requirements for these scenarios and how they differ against IT. We also introduce classical cryptography and how quantum computers pose a threat to such security protocols. Furthermore, we introduce state-of-the-art proposals of PQC protocols and present their characteristics. We conclude by discussing the problematic of integrating PQC in industrial environments. △ Less

Submitted 11 June, 2024; v1 submitted 8 January, 2024; originally announced January 2024.

Comments: 27 pages, 7 figures, 10 tables

An infinite class of quantum codes derived from duadic constacyclic codes

Authors: Reza Dastbasteh, Josu Etxezarreta Martinez, Andrew Nemec, Antonio deMarti iOlius, Pedro Crespo Bofill

Abstract: We present a family of quantum stabilizer codes using the structure of duadic constacyclic codes over $\mathbb{F}_4$. Within this family, quantum codes can possess varying dimensions, and their minimum distances are lower bounded by a square root bound. For each fixed dimension, this allows us to construct an infinite sequence of binary quantum codes with a growing minimum distance. Additionally,… ▽ More We present a family of quantum stabilizer codes using the structure of duadic constacyclic codes over $\mathbb{F}_4$. Within this family, quantum codes can possess varying dimensions, and their minimum distances are lower bounded by a square root bound. For each fixed dimension, this allows us to construct an infinite sequence of binary quantum codes with a growing minimum distance. Additionally, we prove that this family of quantum codes includes an infinite subclass of degenerate codes. We also introduce a technique for extending splittings of duadic constacyclic codes, providing new insights into the minimum distance and minimum odd-like weight of specific duadic constacyclic codes. Finally, we provide numerical examples of some quantum codes with short lengths within this family. △ Less

Submitted 27 May, 2024; v1 submitted 11 December, 2023; originally announced December 2023.

Comments: 31 pages, 2 tables

MSC Class: 94B05; 94B15

Hacking Cryptographic Protocols with Advanced Variational Quantum Attacks

Authors: Borja Aizpurua, Pablo Bermejo, Josu Etxezarreta Martinez, Roman Orus

Abstract: Here we introduce an improved approach to Variational Quantum Attack Algorithms (VQAA) on crytographic protocols. Our methods provide robust quantum attacks to well-known cryptographic algorithms, more efficiently and with remarkably fewer qubits than previous approaches. We implement simulations of our attacks for symmetric-key protocols such as S-DES, S-AES and Blowfish. For instance, we show ho… ▽ More Here we introduce an improved approach to Variational Quantum Attack Algorithms (VQAA) on crytographic protocols. Our methods provide robust quantum attacks to well-known cryptographic algorithms, more efficiently and with remarkably fewer qubits than previous approaches. We implement simulations of our attacks for symmetric-key protocols such as S-DES, S-AES and Blowfish. For instance, we show how our attack allows a classical simulation of a small 8-qubit quantum computer to find the secret key of one 32-bit Blowfish instance with 24 times fewer number of iterations than a brute-force attack. Our work also shows improvements in attack success rates for lightweight ciphers such as S-DES and S-AES. Further applications beyond symmetric-key cryptography are also discussed, including asymmetric-key protocols and hash functions. In addition, we also comment on potential future improvements of our methods. Our results bring one step closer assessing the vulnerability of large-size classical cryptographic protocols with Noisy Intermediate-Scale Quantum (NISQ) devices, and set the stage for future research in quantum cybersecurity. △ Less

Submitted 6 November, 2023; originally announced November 2023.

Comments: 12 pages, 8 figures

RecolorCloud: A Point Cloud Tool for Recoloring, Segmentation, and Conversion

Authors: Esteban Segarra Martinez, Ryan P. McMahan

Abstract: Point clouds are a 3D space representation of an environment that was recorded with a high precision laser scanner. These scanners can suffer from environmental interference such as surface shading, texturing, and reflections. Because of this, point clouds may be contaminated with fake or incorrect colors. Current open source or proprietary tools offer limited or no access to correcting these visu… ▽ More Point clouds are a 3D space representation of an environment that was recorded with a high precision laser scanner. These scanners can suffer from environmental interference such as surface shading, texturing, and reflections. Because of this, point clouds may be contaminated with fake or incorrect colors. Current open source or proprietary tools offer limited or no access to correcting these visual errors automatically. RecolorCloud is a tool developed to resolve these color conflicts by utilizing automated color recoloring. We offer the ability to deleting or recoloring outlier points automatically with users only needing to specify bounding box regions to effect colors. Results show a vast improvement of the photo-realistic quality of large point clouds. Additionally, users can quickly recolor a point cloud with set semantic segmentation colors. △ Less

Submitted 19 October, 2023; originally announced October 2023.

Comments: 6 Pages, 9 figures, 1 table, To be submitted to the ACM MMSys 2024 Conference

Mayawaves: Python Library for Interacting with the Einstein Toolkit and the MAYA Catalog

Authors: Deborah Ferguson, Surendra Anne, Miguel Gracia-Linares, Hector Iglesias, Aasim Jan, Erick Martinez, Lu Lu, Filippo Meoni, Ryan Nowicki, Max L. Trostel, Bing-Jyun Tsao, Finny Valorz

Abstract: Numerical relativity simulations are crucial for studying black holes and have been instrumental in the detection of gravitational waves by the LVK. However, these simulations produce vast amounts of data that must be processed in order to perform studies, create models, and use them with gravitational wave detection pipelines. This paper introduces mayawaves, an open-source python library for pro… ▽ More Numerical relativity simulations are crucial for studying black holes and have been instrumental in the detection of gravitational waves by the LVK. However, these simulations produce vast amounts of data that must be processed in order to perform studies, create models, and use them with gravitational wave detection pipelines. This paper introduces mayawaves, an open-source python library for processing, studying, and exporting numerical relativity simulations performed using the Einstein Toolkit and MAYA. Mayawaves streamlines the process of analyzing simulations with an intuitive interface, greatly reducing the learning curve for numerical relativity. △ Less

Submitted 1 September, 2023; originally announced September 2023.

Comments: 2 pages

Second MAYA Catalog of Binary Black Hole Numerical Relativity Waveforms

Authors: Deborah Ferguson, Evelyn Allsup, Surendra Anne, Galina Bouyer, Miguel Gracia-Linares, Hector Iglesias, Aasim Jan, Pablo Laguna, Jacob Lange, Erick Martinez, Filippo Meoni, Ryan Nowicki, Deirdre Shoemaker, Blake Steadham, Max L. Trostel, Bing-Jyun Tsao, Finny Valorz

Abstract: Numerical relativity waveforms are a critical resource in the quest to deepen our understanding of the dynamics of, and gravitational waves emitted from, merging binary systems. We present 181 new numerical relativity simulations as the second MAYA catalog of binary black hole waveforms (a sequel to the Georgia Tech waveform catalog). Most importantly, these include 55 high mass ratio (q >= 4), 48… ▽ More Numerical relativity waveforms are a critical resource in the quest to deepen our understanding of the dynamics of, and gravitational waves emitted from, merging binary systems. We present 181 new numerical relativity simulations as the second MAYA catalog of binary black hole waveforms (a sequel to the Georgia Tech waveform catalog). Most importantly, these include 55 high mass ratio (q >= 4), 48 precessing, and 92 eccentric (e > 0.01) simulations, including 7 simulations which are both eccentric and precessing. With these significant additions, this new catalog fills in considerable gaps in existing public numerical relativity waveform catalogs. The waveforms presented in this catalog are shown to be convergent and are consistent with current gravitational wave models. They are available to the public at https://cgp.ph.utexas.edu/waveform. △ Less

Submitted 13 September, 2023; v1 submitted 1 September, 2023; originally announced September 2023.

Comments: 11 pages, 9 figures

Report number: UTWI-32-2023

Dielectric Assist Accelerating Structures for Compact Linear Accelerators of Low Energy Particles in Hadrontherapy Treatments

Authors: Pablo Martinez-Reviriego, Daniel Esperante, Alexej Grudiev, Benito Gimeno, César Blanch, Daniel González-Iglesias, Nuria Fuster-Martínez, Pablo Martín-Luna, Eduardo Martínez, Abraham Menendez, Juan Fuster

Abstract: Dielectric Assist Accelerating (DAA) structures based on ultralow-loss ceramic are being studied as an alternative to conventional disk-loaded copper cavities. This accelerating structure consists of dielectric disks with irises arranged periodically in metallic structures working under the TM$_{02}$-$π$ mode. In this paper, the numerical design of an S-band DAA structure for low beta particles, s… ▽ More Dielectric Assist Accelerating (DAA) structures based on ultralow-loss ceramic are being studied as an alternative to conventional disk-loaded copper cavities. This accelerating structure consists of dielectric disks with irises arranged periodically in metallic structures working under the TM$_{02}$-$π$ mode. In this paper, the numerical design of an S-band DAA structure for low beta particles, such as protons or carbon ions used for Hadrontherapy treatments, is shown. Four dielectric materials with different permittivity and loss tangent are studied as well as different particle velocities. Through optimization, a design that concentrates most of the RF power in the vacuum space near the beam axis is obtained, leading to a significant reduction of power loss on the metallic walls. This allows to fabricate cavities with an extremely high quality factor, over 100 000, and shunt impedance over 300 M$Ω$/m at room temperature. During the numerical study, the design optimization has been improved by adjusting some of the cell parameters in order to both increase the shunt impedance and reduce the peak electric field in certain locations of the cavity, which can lead to instabilities in its normal functioning. △ Less

Submitted 7 August, 2023; originally announced August 2023.

Counting roots of fully triangular polynomials over finite fields

Authors: José Gustavo Coelho, Fabio Enrique Brochero Martínez

Abstract: Let $\mathbb{F}_q$ be a finite field with $q$ elements, $f \in \mathbb{F}_q[x_1, \dots, x_n]$ a polynomial in $n$ variables and let us denote by $N(f)$ the number of roots of $f$ in $\mathbb{F}_q^n$. %Many authors, such as Wei Cao and Kung Jiang have used augmented degree matrices to determine $N(f)$ for different families of polynomials. In this paper we consider the family of fully triangular po… ▽ More Let $\mathbb{F}_q$ be a finite field with $q$ elements, $f \in \mathbb{F}_q[x_1, \dots, x_n]$ a polynomial in $n$ variables and let us denote by $N(f)$ the number of roots of $f$ in $\mathbb{F}_q^n$. %Many authors, such as Wei Cao and Kung Jiang have used augmented degree matrices to determine $N(f)$ for different families of polynomials. In this paper we consider the family of fully triangular polynomials, i.e., polynomials of the form \begin{equation*} f(x_1, \dots, x_n) = a_1 x_1^{d_{1,1}} + a_2 x_1^{d_{1,2}} x_2^{d_{2,2}} + \dots + a_n x_1^{d_{1,n}}\cdots x_n^{d_{n,n}} - b, \end{equation*} where $d_{i,j} > 0$ for all $1 \le i \le j \le n$. For these polynomials, we obtain explicit formulas for $N(f)$ when the augmented degree matrix of $f$ is row-equivalent to the augmented degree matrix of a linear polynomial or a quadratic diagonal polynomial. △ Less

Submitted 7 December, 2023; v1 submitted 2 August, 2023; originally announced August 2023.

MSC Class: 11T06; 11D45; 11T24

Journal ref: Finite Fields and Their Applications, Volume 94, 2024, 102345

High-speed data processing onboard sunrise chromospheric infrared spectropolarimeter for the SUNRISE III balloon telescope

Authors: Masahito Kubo, Yukio Katsukawa, David Hernández Expósito, Antonio Sánchez Gómez, María Balaguer Jimenéz, David Orozco Suárez, José M. Morales Fernández, Beatriz Aparicio del Moral, Antonio J. Moreno Mantas, Eduardo Bailón Martínez, Jose Carlos del Toro Iniesta, Yusuke Kawabata, Carlos Quintero Noda, Takayoshi Oba, Ryohtaroh T. Ishikawa, Toshifumi Shimizu

Abstract: The Sunrise Chromospheric Infrared spectroPolarimeter (SCIP) has been developed for the third flight of the SUNRISE balloon-borne stratospheric solar observatory. The aim of SCIP is to reveal the evolution of three-dimensional magnetic fields in the solar photosphere and chromosphere using spectropolarimetric measurements with a polarimetric precision of 0.03\% (1$σ$). Multiple lines in the 770 an… ▽ More The Sunrise Chromospheric Infrared spectroPolarimeter (SCIP) has been developed for the third flight of the SUNRISE balloon-borne stratospheric solar observatory. The aim of SCIP is to reveal the evolution of three-dimensional magnetic fields in the solar photosphere and chromosphere using spectropolarimetric measurements with a polarimetric precision of 0.03\% (1$σ$). Multiple lines in the 770 and 850 nm wavelength bands are simultaneously observed with two 2k$\times$2k CMOS cameras at a frame rate of 31.25 Hz. Stokes profiles are calculated onboard by accumulating the images modulated by a polarization modulation unit, and then compression processes are applied to the two-dimensional maps of the Stokes profiles. This onboard data processing effectively reduces the data rate. SCIP electronics can handle large data formats at high speed. Before the implementation into the flight SCIP electronics, a performance verification of the onboard data processing was performed with synthetic SCIP data that were produced with a numerical simulation modeling the solar atmospheres. Finally, we verified that the high-speed onboard data processing was realized on ground with the flight hardware by using images illuminated by natural sunlight or an LED. △ Less

Submitted 31 July, 2023; originally announced July 2023.

Comments: 31 pages, 11 figures, accepted for publication in JATIS

Decoding algorithms for surface codes

Authors: Antonio deMarti iOlius, Patricio Fuentes, Román Orús, Pedro M. Crespo, Josu Etxezarreta Martinez

Abstract: Quantum technologies have the potential to solve certain computationally hard problems with polynomial or super-polynomial speedups when compared to classical methods. Unfortunately, the unstable nature of quantum information makes it prone to errors. For this reason, quantum error correction is an invaluable tool to make quantum information reliable and enable the ultimate goal of fault-tolerant… ▽ More Quantum technologies have the potential to solve certain computationally hard problems with polynomial or super-polynomial speedups when compared to classical methods. Unfortunately, the unstable nature of quantum information makes it prone to errors. For this reason, quantum error correction is an invaluable tool to make quantum information reliable and enable the ultimate goal of fault-tolerant quantum computing. Surface codes currently stand as the most promising candidates to build near term error corrected qubits given their two-dimensional architecture, the requirement of only local operations, and high tolerance to quantum noise. Decoding algorithms are an integral component of any error correction scheme, as they are tasked with producing accurate estimates of the errors that affect quantum information, so that they can subsequently be corrected. A critical aspect of decoding algorithms is their speed, since the quantum state will suffer additional errors with the passage of time. This poses a connundrum, where decoding performance is improved at the expense of complexity and viceversa. In this review, a thorough discussion of state-of-the-art decoding algorithms for surface codes is provided. The target audience of this work are both readers with an introductory understanding of the field as well as those seeking to further their knowledge of the decoding paradigm of surface codes. We describe the core principles of these decoding methods as well as existing variants that show promise for improved results. In addition, both the decoding performance, in terms of error correction capability, and decoding complexity, are compared. A review of the existing software tools regarding surface codes decoding is also provided △ Less

Submitted 3 May, 2024; v1 submitted 27 July, 2023; originally announced July 2023.

Comments: 59 pages, 38 figures

Non-resonant ultra-fast multipactor regime in dielectric-assist accelerating structures

Authors: Daniel González-Iglesias, Benito Gimeno, Daniel Esperante, Pablo Martinez-Reviriego, Pablo Martín-Luna, Nuria Fuster-Martínez, César Blanch, Eduardo Martínez, Abraham Menendez, Juan Fuster, Alexej Grudiev

Abstract: The objective of this work is the evaluation of the risk of suffering a multipactor discharge in an S-band dielectric-assist accelerating (DAA) structure for a compact low-energy linear particle accelerator dedicated to hadrontherapy treatments. A DAA structure consists of ultra-low loss dielectric ciylinders and disks with irises which are periodically arranged in a metallic enclosure, with the a… ▽ More The objective of this work is the evaluation of the risk of suffering a multipactor discharge in an S-band dielectric-assist accelerating (DAA) structure for a compact low-energy linear particle accelerator dedicated to hadrontherapy treatments. A DAA structure consists of ultra-low loss dielectric ciylinders and disks with irises which are periodically arranged in a metallic enclosure, with the advantage of having an extremely high quality factor and very high shunt impedance at room temperature, and it is therefore proposed as a potential alternative to conventional disk-loaded copper structures. However, it has been observed that these structures suffer from multipactor discharges. In fact, multipactor is one of the main problems of these devices, as it limits the maximum accelerating gradient. Because of this, the analysis of multipactor risk in the early design steps of DAA cavities is crucial to ensure the correct performance of the device after fabrication. In this paper, we present a comprehensive and detailed study of multipactor in our DAA design through numerical simulations performed with an in-house developed code based on the Monte-Carlo method. The phenomenology of the multipactor (resonant electron trajectories, electron flight time between impacts, etc.) is described in detail for different values of the accelerating gradient. It has been found that in these structures an ultra-fast non-resonant multipactor appears, which is different from the types of multipactor theoretically studied in the scientific literature. In addition, the effect of several low electron emission coatings on the multipactor threshold is investigated. Furthermore, a novel design based on the modification of the DAA cell geometry for multipactor mitigation is introduced, which shows a significant increase in the accelerating gradient handling capabilities of our prototype. △ Less

Submitted 26 July, 2023; originally announced July 2023.

Generation of imprinted strain gradients for spintronics

Authors: Giovanni Masciocchi, Mouad Fattouhi, Elizaveta Spetzler, Maria-Andromachi Syskaki, Ronald Lehndorff, Eduardo Martinez, Jeffrey McCord, Luis Lopez-Diaz, Andreas Kehlberger, Mathias Kläui

Abstract: In this work, we propose and evaluate an inexpensive and CMOS-compatible method to locally apply strain on a Si/SiOx substrate. Due to high growth temperatures and different thermal expansion coefficients, a SiN passivation layer exerts a compressive stress when deposited on a commercial silicon wafer. Removing selected areas of the passivation layer alters the strain on the micrometer range, lead… ▽ More In this work, we propose and evaluate an inexpensive and CMOS-compatible method to locally apply strain on a Si/SiOx substrate. Due to high growth temperatures and different thermal expansion coefficients, a SiN passivation layer exerts a compressive stress when deposited on a commercial silicon wafer. Removing selected areas of the passivation layer alters the strain on the micrometer range, leading to changes in the local magnetic anisotropy of a magnetic material through magnetoelastic interactions. Using Kerr microscopy, we experimentally demonstrate how the magnetoelastic energy landscape, created by a pair of openings, in a magnetic nanowire enables the creation of pinning sites for in-plane vortex walls that propagate in a magnetic racetrack. We report substantial pinning fields up to 15 mT for device-relevant ferromagnetic materials with positive magnetostriction. We support our experimental results with finite element simulations for the induced strain, micromagnetic simulations and 1D model calculations using the realistic strain profile to identify the depinning mechanism. All the observations above are due to the magnetoelastic energy contribution in the system, which creates local energy minima for the domain wall at the desired location. By controlling domain walls with strain, we realize the prototype of a true power-on magnetic sensor that can measure discrete magnetic fields or Oersted currents. This utilizes a technology that does not require piezoelectric substrates or high-resolution lithography, thus enabling wafer-level production. △ Less

Submitted 10 May, 2023; v1 submitted 9 May, 2023; originally announced May 2023.

High-Level Context Representation for Emotion Recognition in Images

Authors: Willams de Lima Costa, Estefania Talavera Martinez, Lucas Silva Figueiredo, Veronica Teichrieb

Abstract: Emotion recognition is the task of classifying perceived emotions in people. Previous works have utilized various nonverbal cues to extract features from images and correlate them to emotions. Of these cues, situational context is particularly crucial in emotion perception since it can directly influence the emotion of a person. In this paper, we propose an approach for high-level context represen… ▽ More Emotion recognition is the task of classifying perceived emotions in people. Previous works have utilized various nonverbal cues to extract features from images and correlate them to emotions. Of these cues, situational context is particularly crucial in emotion perception since it can directly influence the emotion of a person. In this paper, we propose an approach for high-level context representation extraction from images. The model relies on a single cue and a single encoding stream to correlate this representation with emotions. Our model competes with the state-of-the-art, achieving an mAP of 0.3002 on the EMOTIC dataset while also being capable of execution on consumer-grade hardware at approximately 90 frames per second. Overall, our approach is more efficient than previous models and can be easily deployed to address real-world problems related to emotion recognition. △ Less

Submitted 5 May, 2023; originally announced May 2023.

Comments: Accepted for publication at LXAI @ CVPR 2023

Large-scale detector testing for the GAPS Si(Li) Tracker

Authors: Mengjiao Xiao, Achim Stoessl, Brandon Roach, Cory Gerrity, Ian Bouche, Gabriel Bridges, Philip von Doetinchem, Charles J. Hailey, Derik Kraych, Anika Katt, Michael Law, Alexander Lowell, Evan Martinez, Kerstin Perez, Maggie Reed, Chelsea Rodriguez, Nathan Saffold, Ceaser Stringfield, Hershel Weiner, Kelsey Yee

Abstract: Lithium-drifted silicon [Si(Li)] has been used for decades as an ionizing radiation detector in nuclear, particle, and astrophysical experiments, though such detectors have frequently been limited to small sizes (few cm$^2$) and cryogenic operating temperatures. The 10-cm-diameter Si(Li) detectors developed for the General Antiparticle Spectrometer (GAPS) balloon-borne dark matter experiment are n… ▽ More Lithium-drifted silicon [Si(Li)] has been used for decades as an ionizing radiation detector in nuclear, particle, and astrophysical experiments, though such detectors have frequently been limited to small sizes (few cm$^2$) and cryogenic operating temperatures. The 10-cm-diameter Si(Li) detectors developed for the General Antiparticle Spectrometer (GAPS) balloon-borne dark matter experiment are novel particularly for their requirements of low cost, large sensitive area (~10 m$^2$ for the full 1440-detector array), high temperatures (near -40$\,^\circ$C), and energy resolution below 4 keV FWHM for 20--100-keV x-rays. Previous works have discussed the manufacturing, passivation, and small-scale testing of prototype GAPS Si(Li) detectors. Here we show for the first time the results from detailed characterization of over 1100 flight detectors, illustrating the consistent intrinsic low-noise performance of a large sample of GAPS detectors. This work demonstrates the feasibility of large-area and low-cost Si(Li) detector arrays for next-generation astrophysics and nuclear physics applications. △ Less

Submitted 7 September, 2023; v1 submitted 29 April, 2023; originally announced May 2023.

Comments: Updated to version accepted in IEEE Trans Nucl Sci. Minor changes to text, fixed plotting error on Fig. 5. Conclusions unchanged

Journal ref: IEEE Trans. Nucl. Sci. 70 (8), 2023, pp. 2125-2133

LD-GAN: Low-Dimensional Generative Adversarial Network for Spectral Image Generation with Variance Regularization

Authors: Emmanuel Martinez, Roman Jacome, Alejandra Hernandez-Rojas, Henry Arguello

Abstract: Deep learning methods are state-of-the-art for spectral image (SI) computational tasks. However, these methods are constrained in their performance since available datasets are limited due to the highly expensive and long acquisition time. Usually, data augmentation techniques are employed to mitigate the lack of data. Surpassing classical augmentation methods, such as geometric transformations, G… ▽ More Deep learning methods are state-of-the-art for spectral image (SI) computational tasks. However, these methods are constrained in their performance since available datasets are limited due to the highly expensive and long acquisition time. Usually, data augmentation techniques are employed to mitigate the lack of data. Surpassing classical augmentation methods, such as geometric transformations, GANs enable diverse augmentation by learning and sampling from the data distribution. Nevertheless, GAN-based SI generation is challenging since the high-dimensionality nature of this kind of data hinders the convergence of the GAN training yielding to suboptimal generation. To surmount this limitation, we propose low-dimensional GAN (LD-GAN), where we train the GAN employing a low-dimensional representation of the {dataset} with the latent space of a pretrained autoencoder network. Thus, we generate new low-dimensional samples which are then mapped to the SI dimension with the pretrained decoder network. Besides, we propose a statistical regularization to control the low-dimensional representation variance for the autoencoder training and to achieve high diversity of samples generated with the GAN. We validate our method LD-GAN as data augmentation strategy for compressive spectral imaging, SI super-resolution, and RBG to spectral tasks with improvements varying from 0.5 to 1 [dB] in each task respectively. We perform comparisons against the non-data augmentation training, traditional DA, and with the same GAN adjusted and trained to generate the full-sized SIs. The code of this paper can be found in https://github.com/romanjacome99/LD_GAN.git △ Less

Submitted 28 April, 2023; originally announced May 2023.

Comments: This paper was accepted at the LatinX in Computer Vision Research Workshop at CVPR2023

A contact interaction model for the $η$ and $η'$ mesons in a SDE-BSE approach to QCD: masses, decay widths and transition form factors

Authors: Bilgai Almeida Zamora, Enrique Carreon Martínez, Jorge Segovia, J. J. Cobos-Martínez

Abstract: We construct a contact interaction model for the $η$ and $η'$ mesons in the SDE-BSE approach to QCD and compute several static properties of these mesons and their transition form factors. We find that this model gives an excellent description of the $η$ and $η'$ static properties, namely their masses, decay width and decay constants. However, a contact interaction disagrees with experimental data… ▽ More We construct a contact interaction model for the $η$ and $η'$ mesons in the SDE-BSE approach to QCD and compute several static properties of these mesons and their transition form factors. We find that this model gives an excellent description of the $η$ and $η'$ static properties, namely their masses, decay width and decay constants. However, a contact interaction disagrees with experimental data for $Q^2$ greater than 2 GeV$^2$, and produces transition form factors in conflict with perturbative QCD prediction. This is not surpring and the reasons for this are explained △ Less

Submitted 28 April, 2023; originally announced April 2023.

Comments: 10 pages, 4 figures, submitted to PRD

Anisotropic Electronic Structure of the Two-Dimensional Electron Gas at the AlOx/KTaO3(110) interface

Authors: E. A. Martínez, J. Dai, M. Tallarida, N. M. Nemes, F. Y. Bruno

Abstract: Oxide-based two-dimensional electron gases (2DEGs) have generated significant interest due to their potential for discovering novel physical properties. Among these, 2DEGs formed in KTaO3 stand out due to the recently discovered crystal face-dependent superconductivity and large Rashba splitting, both of which hold potential for future oxide electronics devices. In this work, angle-resolved photoe… ▽ More Oxide-based two-dimensional electron gases (2DEGs) have generated significant interest due to their potential for discovering novel physical properties. Among these, 2DEGs formed in KTaO3 stand out due to the recently discovered crystal face-dependent superconductivity and large Rashba splitting, both of which hold potential for future oxide electronics devices. In this work, angle-resolved photoemission spectroscopy is used to study the electronic structure of the 2DEG formed at the (110) surface of KTaO3 after deposition of a thin Al layer. Our experiments revealed a remarkable anisotropy in the orbital character of the electron-like dispersive bands, which form a Fermi surface consisting of two elliptical contours with their major axes perpendicular to each other. The measured electronic structure is used to constrain the modeling parameters of self-consistent tight-binding slab calculations of the band structure. In these calculations, an anisotropic Rashba splitting is found with a value as large as 4 meV at the Fermi level along the [-110] crystallographic direction. This large unconventional and anisotropic Rashba splitting is rationalized based on the orbital angular momentum formulation. These findings provide insights into the interpretation of spin-orbitronics experiments and help to constrain models for superconductivity in the KTO(110)-2DEG system. △ Less

Submitted 28 April, 2023; originally announced April 2023.

Journal ref: Advanced Electronic Materials 2300267 (2023)

Sundman transformation and alternative tangent structuresSundman transformation and alternative tangent structures

Authors: José F. Cariñena, Eduardo Martínez, Miguel C. Muñoz-Lecanda

Abstract: A geometric approach to Sundman transformation defined by basic functions for systems of second-order differential equations is developed and the necessity of a change of the tangent structure by means of the function defining the Sundman transformation is shown. Among other applications of such theory we study the linearisability of a system of second-order differential equations and in particula… ▽ More A geometric approach to Sundman transformation defined by basic functions for systems of second-order differential equations is developed and the necessity of a change of the tangent structure by means of the function defining the Sundman transformation is shown. Among other applications of such theory we study the linearisability of a system of second-order differential equations and in particular the simplest case of a second-order differential equation. The theory is illustrated with several examples. △ Less

Submitted 1 April, 2023; originally announced April 2023.

MSC Class: 34A34; 37N05; 53C15; 70F16

Journal ref: J. Phys. A: Math. Theor. 56 (2023)

Computational Spectral Imaging: A Contemporary Overview

Authors: Jorge Bacca, Emmanuel Martinez, Henry Arguello

Abstract: Spectral imaging collects and processes information along spatial and spectral coordinates quantified in discrete voxels, which can be treated as a 3D spectral data cube. The spectral images (SIs) allow identifying objects, crops, and materials in the scene through their spectral behavior. Since most spectral optical systems can only employ 1D or maximum 2D sensors, it is challenging to directly a… ▽ More Spectral imaging collects and processes information along spatial and spectral coordinates quantified in discrete voxels, which can be treated as a 3D spectral data cube. The spectral images (SIs) allow identifying objects, crops, and materials in the scene through their spectral behavior. Since most spectral optical systems can only employ 1D or maximum 2D sensors, it is challenging to directly acquire the 3D information from available commercial sensors. As an alternative, computational spectral imaging (CSI) has emerged as a sensing tool where the 3D data can be obtained using 2D encoded projections. Then, a computational recovery process must be employed to retrieve the SI. CSI enables the development of snapshot optical systems that reduce acquisition time and provide low computational storage costs compared to conventional scanning systems. Recent advances in deep learning (DL) have allowed the design of data-driven CSI to improve the SI reconstruction or, even more, perform high-level tasks such as classification, unmixing, or anomaly detection directly from 2D encoded projections. This work summarises the advances in CSI, starting with SI and its relevance; continuing with the most relevant compressive spectral optical systems. Then, CSI with DL will be introduced, and the recent advances in combining the physical optical design with computational DL algorithms to solve high-level tasks. △ Less

Submitted 8 March, 2023; originally announced March 2023.

A note on Bass' conjecture

Authors: Danilo Vilela Avelar, Fabio Enrique Brochero Martínez, Sávio Ribas

Abstract: For a finite group $G$, we denote by ${\sf d}(G)$ and by ${\sf E}(G)$, respectively, the small Davenport constant and the Gao constant of $G$. Let $C_n$ be the cyclic group of order $n$ and let $G_{m,n,s} = C_n \rtimes_s C_m$ be a metacyclic group. In [J. Bass; {\em Improving the Erdős-Ginzburg-Ziv theorem for some non-abelian groups.} J. Number Theory {\bf 126} (2007), 217-236, Conjecture 17], Ba… ▽ More For a finite group $G$, we denote by ${\sf d}(G)$ and by ${\sf E}(G)$, respectively, the small Davenport constant and the Gao constant of $G$. Let $C_n$ be the cyclic group of order $n$ and let $G_{m,n,s} = C_n \rtimes_s C_m$ be a metacyclic group. In [J. Bass; {\em Improving the Erdős-Ginzburg-Ziv theorem for some non-abelian groups.} J. Number Theory {\bf 126} (2007), 217-236, Conjecture 17], Bass conjectured that ${\sf d}(G_{m,n,s}) = m+n-2$ and ${\sf E}(G_{m,n,s}) = mn+m+n-2$ provided $ord_n(s) = m$. In this paper, we show that the assumption $ord_n(s) = m$ is essential and cannot be removed. Moreover, if we suppose that Bass' conjecture holds for $G_{m,n,s}$ and the $mn$-product-one free sequences of maximal length are well behaved, then Bass conjecture also holds for $G_{2m,2n,r}$, where $r^2 \equiv s \pmod n$. △ Less

Submitted 22 February, 2023; originally announced February 2023.

The superadditivity effects of quantum capacity decrease with the dimension for qudit depolarizing channels

Authors: Josu Etxezarreta Martinez, Antonio deMarti iOlius, Pedro M. Crespo

Abstract: Quantum channel capacity is a fundamental quantity in order to understand how good can quantum information be transmitted or corrected when subjected to noise. However, it is generally not known how to compute such quantities, since the quantum channel coherent information is not additive for all channels, implying that it must be maximized over an unbounded number of channel uses. This leads to t… ▽ More Quantum channel capacity is a fundamental quantity in order to understand how good can quantum information be transmitted or corrected when subjected to noise. However, it is generally not known how to compute such quantities, since the quantum channel coherent information is not additive for all channels, implying that it must be maximized over an unbounded number of channel uses. This leads to the phenomenon known as superadditivity, which refers to the fact that the regularized coherent information of $n$ channel uses exceeds one-shot coherent information. In this article, we study how the gain in quantum capacity of qudit depolarizing channels relates to the dimension of the systems considered. We make use of an argument based on the no-cloning bound in order to proof that the possible superadditive effects decrease as a function of the dimension for such family of channels. In addition, we prove that the capacity of the qudit depolarizing channel coincides with the coherent information when $d\rightarrow\infty$. We also discuss the private classical capacity and obain similar results. We conclude that when high dimensional qudits experiencing depolarizing noise are considered, the coherent information of the channel is not only an achievable rate but essentially the maximum possible rate for any quantum block code. △ Less

Submitted 31 August, 2023; v1 submitted 24 January, 2023; originally announced January 2023.

Comments: 10 pages, 2 figures

Journal ref: Phys. Rev. A 108, 032602 (2023)

Performance enhancement of surface codes via recursive MWPM decoding

Authors: Antonio deMarti iOlius, Josu Etxezarreta Martinez, Patricio Fuentes, Pedro M. Crespo

Abstract: The minimum weight perfect matching (MWPM) decoder is the standard decoding strategy for quantum surface codes. However, it suffers a harsh decrease in performance when subjected to biased or non-identical quantum noise. In this work, we modify the conventional MWPM decoder so that it considers the biases, the non-uniformities and the relationship between $X$, $Y$ and $Z$ errors of the constituent… ▽ More The minimum weight perfect matching (MWPM) decoder is the standard decoding strategy for quantum surface codes. However, it suffers a harsh decrease in performance when subjected to biased or non-identical quantum noise. In this work, we modify the conventional MWPM decoder so that it considers the biases, the non-uniformities and the relationship between $X$, $Y$ and $Z$ errors of the constituent qubits of a given surface code. Our modified approach, which we refer to as the recursive MWPM decoder, obtains an $18\%$ improvement in the probability threshold $p_{th}$ under depolarizing noise. We also obtain significant performance improvements when considering biased noise and independent non-identically distributed (i.ni.d.) error models derived from measurements performed on state-of-the-art quantum processors. In fact, when subjected to i.ni.d. noise, the recursive MWPM decoder yields a performance improvement of $105.5\%$ over the conventional MWPM strategy and, in some cases, it even surpasses the performance obtained over the well-known depolarizing channel. △ Less

Submitted 19 July, 2023; v1 submitted 22 December, 2022; originally announced December 2022.

Leveraging Contextual Data Augmentation for Generalizable Melanoma Detection

Authors: Nick DiSanto, Gavin Harding, Ethan Martinez, Benjamin Sanders

Abstract: While skin cancer detection has been a valuable deep learning application for years, its evaluation has often neglected the context in which testing images are assessed. Traditional melanoma classifiers assume that their testing environments are comparable to the structured images they are trained on. This paper challenges this notion and argues that mole size, a critical attribute in professional… ▽ More While skin cancer detection has been a valuable deep learning application for years, its evaluation has often neglected the context in which testing images are assessed. Traditional melanoma classifiers assume that their testing environments are comparable to the structured images they are trained on. This paper challenges this notion and argues that mole size, a critical attribute in professional dermatology, can be misleading in automated melanoma detection. While malignant melanomas tend to be larger than benign melanomas, relying solely on size can be unreliable and even harmful when contextual scaling of images is not possible. To address this issue, this implementation proposes a custom model that performs various data augmentation procedures to prevent overfitting to incorrect parameters and simulate real-world usage of melanoma detection applications. Multiple custom models employing different forms of data augmentation are implemented to highlight the most significant features of mole classifiers. These implementations emphasize the importance of considering user unpredictability when deploying such applications. The caution required when manually modifying data is acknowledged, as it can result in data loss and biased conclusions. Additionally, the significance of data augmentation in both the dermatology and deep learning communities is considered. △ Less

Submitted 9 August, 2023; v1 submitted 9 December, 2022; originally announced December 2022.

Comments: 6 pages, 3 figures, 4 tables

A comparative study of source-finding techniques in HI emission line cubes using SoFiA, MTObjects, and supervised deep learning

Authors: J. A. Barkai, M. A. W. Verheijen, E. T. Martínez, M. H. F. Wilkinson

Abstract: The 21 cm spectral line emission of atomic neutral hydrogen (HI) is one of the primary wavelengths observed in radio astronomy. However, the signal is intrinsically faint and the HI content of galaxies depends on the cosmic environment, requiring large survey volumes and survey depth to investigate the HI Universe. As the amount of data coming from these surveys continues to increase with technolo… ▽ More The 21 cm spectral line emission of atomic neutral hydrogen (HI) is one of the primary wavelengths observed in radio astronomy. However, the signal is intrinsically faint and the HI content of galaxies depends on the cosmic environment, requiring large survey volumes and survey depth to investigate the HI Universe. As the amount of data coming from these surveys continues to increase with technological improvements, so does the need for automatic techniques for identifying and characterising HI sources while considering the tradeoff between completeness and purity. This study aimed to find the optimal pipeline for finding and masking the most sources with the best mask quality and the fewest artefacts in 3D neutral hydrogen cubes. Various existing methods were explored in an attempt to create a pipeline to optimally identify and mask the sources in 3D neutral hydrogen 21 cm spectral line data cubes. Two traditional source-finding methods were tested, SoFiA and MTObjects, as well as a new supervised deep learning approach, in which a 3D convolutional neural network architecture, known as V-Net was used. These three source-finding methods were further improved by adding a classical machine learning classifier as a post-processing step to remove false positive detections. The pipelines were tested on HI data cubes from the Westerbork Synthesis Radio Telescope with additional inserted mock galaxies. SoFiA combined with a random forest classifier provided the best results, with the V-Net-random forest combination a close second. We suspect this is due to the fact that there are many more mock sources in the training set than real sources. There is, therefore, room to improve the quality of the V-Net network with better-labelled data such that it can potentially outperform SoFiA. △ Less

Submitted 23 November, 2022; originally announced November 2022.

MSC Class: 85-08 ACM Class: I.4.6; I.2.10

Journal ref: A&A 670, A55 (2023)

On the number of rational points of Artin-Schreier curves and hypersurfaces

Authors: Fabio Enrique Brochero Martínez, Daniela Alves de Oliveira

Abstract: Let $\mathbb F_{q^n}$ denote the finite field with $q^n$ elements. In this paper we determine the number of $\mathbb F_{q^n}$-rational points of the affine Artin-Schreier curve given by $y^q-y = x(x^{q^i}-x)-λ$ and of the Artin-Schreier hypersurface $y^q-y=\sum_{j=1}^r a_jx_j(x_j^{q^{i_j}}-x_j)-λ.$ Moreover in both cases, we show that the Weil bound is attained only in the case where the trace of… ▽ More Let $\mathbb F_{q^n}$ denote the finite field with $q^n$ elements. In this paper we determine the number of $\mathbb F_{q^n}$-rational points of the affine Artin-Schreier curve given by $y^q-y = x(x^{q^i}-x)-λ$ and of the Artin-Schreier hypersurface $y^q-y=\sum_{j=1}^r a_jx_j(x_j^{q^{i_j}}-x_j)-λ.$ Moreover in both cases, we show that the Weil bound is attained only in the case where the trace of $λ\in\mathbb F_{q^n}$ over $\mathbb F_q$ is zero. We use quadratic forms and permutation matrices to determine the number of affine rational points of these curves and hypersurfaces. △ Less

Submitted 6 July, 2023; v1 submitted 21 November, 2022; originally announced November 2022.

MSC Class: Primary 12E20 Secondary 11T24

Pre-main Sequence Brackett Emitters in the APOGEE DR17 Catalog: Line Strengths and Physical Properties of Accretion Columns

Authors: Hunter Campbell, Elliott Khilfeh, Kevin R. Covey, Marina Kounkel, Richard Ballantyne, Sabrina Corey, Carlos G. Román-Zúñiga, Jesús Hernández, Ezequiel Manzo Martínez, Karla Peña Ramírez, Alexandre Roman-Lopes, Keivan G. Stassun, Guy S. Stringfellow, Jura Borissova, S. Drew Chojnowski, Valeria Ramírez-Preciado, **young Serena Kim, Javier Serna, Amelia M. Stutz, Ricardo López-Valdivia, Genaro Suárez, Jason E. Ybarra, Penélope Longa-Peña, José G. Fernández-Trincado

Abstract: Very young (t $\lesssim$ 10 Myrs) stars possess strong magnetic fields that channel ionized gas from the interiors of their circumstellar discs to the surface of the star. Upon impacting the stellar surface, the shocked gas recombines and emits hydrogen spectral lines. To characterize the density and temperature of the gas within these accretion streams, we measure equivalent widths of Brackett (B… ▽ More Very young (t $\lesssim$ 10 Myrs) stars possess strong magnetic fields that channel ionized gas from the interiors of their circumstellar discs to the surface of the star. Upon impacting the stellar surface, the shocked gas recombines and emits hydrogen spectral lines. To characterize the density and temperature of the gas within these accretion streams, we measure equivalent widths of Brackett (Br) 11-20 emission lines detected in 1101 APOGEE spectra of 326 likely pre-main sequence accretors. For sources with multiple observations, we measure median epoch-to-epoch line strength variations of 10% in Br11 and 20% in Br20. We also fit the measured line ratios to predictions of radiative transfer models by Kwan & Fischer. We find characteristic best-fit electron densities of $n_e$ = 10$^{11} - 10^{12}$ cm$^{-3}$, and excitation temperatures that are inversely correlated with electron density (from T$\sim$5000 K for $n_e \sim 10^{12}$ cm$^{-3}$, to T$\sim$12500 K at $n_e \sim 10^{11}$ cm$^{-3}$). These physical parameters are in good agreement with predictions from modelling of accretion streams that account for the hydrodynamics and radiative transfer within the accretion stream. We also present a supplementary catalog of line measurements from 9733 spectra of 4255 Brackett emission line sources in the APOGEE DR17 dataset. △ Less

Submitted 14 November, 2022; v1 submitted 11 November, 2022; originally announced November 2022.

Comments: 19 pages, 9 figures, accepted to AJ

New physics in $WWγ$ at one loop via Majorana neutrinos

Authors: Eduardo Martínez, Javier Montaño-Domínguez, Héctor Novales-Sánchez, Mónica Salinas

Abstract: Current experimental data guarantees the presence of physics beyond the Standard Model in the neutrino sector. The responsible physical description might show itself through virtual effects on low-energy observables. In particular, massive neutrinos are able to produce contributions to the triple gauge coupling $WWγ$. The present paper deals with the calculation, estimation and analysis of one-loo… ▽ More Current experimental data guarantees the presence of physics beyond the Standard Model in the neutrino sector. The responsible physical description might show itself through virtual effects on low-energy observables. In particular, massive neutrinos are able to produce contributions to the triple gauge coupling $WWγ$. The present paper deals with the calculation, estimation and analysis of one-loop contributions from Majorana neutrinos to the Lorentz-covariant $WWγ$ parametrization. Our calculations show that CP-odd effects vanish exactly, whereas CP-even contributions, $Δκ$ and $ΔQ$, remain. According to our estimations, the effects from heavy neutrinos with masses in the range of hundreds of GeVs dominate over those from light neutrinos. This investigation shows that contributions from heavy Majorana neutrinos to the anomaly $Δκ$ could be as large as $\sim{\cal O}(10^{-3})$, one order of magnitude below the Standard-Model contribution. We find that the International Linear Collider, sensitive to triple gauge couplings participating in $WW$ production, might measure these effects in electron-positron collisions at a center-of-mass energy of $800\,{\rm GeV}$, as long as heavy-neutrino masses are $\gtrsim300\,{\rm GeV}$ and below $\sim1500\,{\rm GeV}$. △ Less

Submitted 26 January, 2023; v1 submitted 8 November, 2022; originally announced November 2022.

Comments: Accepted by Physical Review D for publication, 16 pages, 4 figures

Journal ref: Phys. Rev. D 107 035025 (2023)

An innovative materials design protocol for the development of novel refractory high-entropy alloys for extreme environments

Authors: O. El Atwani, H. T. Vo, M. Tunes, C. Lee, A. Alvarado, N. Krienke, J. D. Poplawsky, A. A. Kohnert, J. Gigax, W. -Y. Chen, M. Li, Y. Wang, J. S. Wróbel, Duc Nguyen-Manh, J. K. S. Baldwin, U. Tukac, E. Aydogan, S. Fensin, E. Martinez

Abstract: In the quest of new materials that can withstand severe irradiation and mechanical extremes for advanced applications (e.g. fission reactors, fusion devices, space applications, etc), design, prediction and control of advanced materials beyond current material designs become a paramount goal. Here, though a combined experimental and simulation methodology, the design of a new nanocrystalline refra… ▽ More In the quest of new materials that can withstand severe irradiation and mechanical extremes for advanced applications (e.g. fission reactors, fusion devices, space applications, etc), design, prediction and control of advanced materials beyond current material designs become a paramount goal. Here, though a combined experimental and simulation methodology, the design of a new nanocrystalline refractory high entropy alloy (RHEA) system is established. Compositions of this alloy, assessed under extreme environments and in situ electron-microscopy, revealed both high mechanical strength and thermal stability, grain refinement under heavy ion irradiation and outstanding irradiation resistance to dual-beam irradiation and helium implantation, marked by remarkable resistance to defect generation, growth and coalescence. The experimental and modeling results, which demonstrated notable agreement, can be applied to design and rapidly assess other alloys subjected to extreme environmental conditions. △ Less

Submitted 28 October, 2022; originally announced October 2022.

Wedderburn Decomposition and Idempotents of some finite metacyclic group algebras

Authors: F. E. Brochero Martínez, L. Batista de Oliveira, C. R. Giraldo Vergara

Abstract: In this article, we show explicitly the Wedderburn decomposition of the metacyclic group algebra $\mathbb F_qG$, where $G$ has a cyclic subgroup of index 2 and $\gcd(|G|,q)=1$. We also construct the complete set of central and left idempotents of these group algebras. In this article, we show explicitly the Wedderburn decomposition of the metacyclic group algebra $\mathbb F_qG$, where $G$ has a cyclic subgroup of index 2 and $\gcd(|G|,q)=1$. We also construct the complete set of central and left idempotents of these group algebras. △ Less

Submitted 13 October, 2022; originally announced October 2022.

MSC Class: 20C05; 16S34

Key Information Extraction in Purchase Documents using Deep Learning and Rule-based Corrections

Authors: Roberto Arroyo, Javier Yebes, Elena Martínez, Héctor Corrales, Javier Lorenzo

Abstract: Deep Learning (DL) is dominating the fields of Natural Language Processing (NLP) and Computer Vision (CV) in the recent times. However, DL commonly relies on the availability of large data annotations, so other alternative or complementary pattern-based techniques can help to improve results. In this paper, we build upon Key Information Extraction (KIE) in purchase documents using both DL and rule… ▽ More Deep Learning (DL) is dominating the fields of Natural Language Processing (NLP) and Computer Vision (CV) in the recent times. However, DL commonly relies on the availability of large data annotations, so other alternative or complementary pattern-based techniques can help to improve results. In this paper, we build upon Key Information Extraction (KIE) in purchase documents using both DL and rule-based corrections. Our system initially trusts on Optical Character Recognition (OCR) and text understanding based on entity tagging to identify purchase facts of interest (e.g., product codes, descriptions, quantities, or prices). These facts are then linked to a same product group, which is recognized by means of line detection and some grou** heuristics. Once these DL approaches are processed, we contribute several mechanisms consisting of rule-based corrections for improving the baseline DL predictions. We prove the enhancements provided by these rule-based corrections over the baseline DL results in the presented experiments for purchase documents from public and NielsenIQ datasets. △ Less

Submitted 7 October, 2022; originally announced October 2022.

Comments: Conference on Computational Linguistics (COLING 2022). PAN-DL Workshop

A Methodology to Generate Crystal-based Molecular Structures for Atomistic Simulations

Authors: Christian F. A. Negre, Andrew Alvarado, Himanshu Singh, Joshua Finkelstein, Enrique Martinez, Romain Perriot

Abstract: We propose a systematic method to construct crystal-based molecular structures often needed as input for computational chemistry studies. These structures include crystal ``slabs" with periodic boundary conditions (PBCs) and non-periodic solids such as Wulff structures. We also introduce a method to build crystal slabs with orthogonal PBC vectors. These methods are integrated into our code, Los Al… ▽ More We propose a systematic method to construct crystal-based molecular structures often needed as input for computational chemistry studies. These structures include crystal ``slabs" with periodic boundary conditions (PBCs) and non-periodic solids such as Wulff structures. We also introduce a method to build crystal slabs with orthogonal PBC vectors. These methods are integrated into our code, Los Alamos Crystal Cut (LCC), which is open source and thus fully available to the community. Examples showing the use of these methods are given throughout the manuscript. △ Less

Submitted 11 October, 2022; v1 submitted 3 October, 2022; originally announced October 2022.

Fast Disparity Estimation from a Single Compressed Light Field Measurement

Authors: Emmanuel Martinez, Edwin Vargas, Henry Arguello

Abstract: The abundant spatial and angular information from light fields has allowed the development of multiple disparity estimation approaches. However, the acquisition of light fields requires high storage and processing cost, limiting the use of this technology in practical applications. To overcome these drawbacks, the compressive sensing (CS) theory has allowed the development of optical architectures… ▽ More The abundant spatial and angular information from light fields has allowed the development of multiple disparity estimation approaches. However, the acquisition of light fields requires high storage and processing cost, limiting the use of this technology in practical applications. To overcome these drawbacks, the compressive sensing (CS) theory has allowed the development of optical architectures to acquire a single coded light field measurement. This measurement is decoded using an optimization algorithm or deep neural network that requires high computational costs. The traditional approach for disparity estimation from compressed light fields requires first recovering the entire light field and then a post-processing step, thus requiring long times. In contrast, this work proposes a fast disparity estimation from a single compressed measurement by omitting the recovery step required in traditional approaches. Specifically, we propose to jointly optimize an optical architecture for acquiring a single coded light field snapshot and a convolutional neural network (CNN) for estimating the disparity maps. Experimentally, the proposed method estimates disparity maps comparable with those obtained from light fields reconstructed using deep learning approaches. Furthermore, the proposed method is 20 times faster in training and inference than the best method that estimates the disparity from reconstructed light fields. △ Less

Submitted 22 September, 2022; originally announced September 2022.

The number of rational points of a class of superelliptic curves

Authors: José Alves Oliveira, Daniela Oliveira, F. E. Brochero Martínez

Abstract: In this paper, we study the number of $\mathbb F_{q^n}$-rational points on the affine curve $\mathcal{X}_{d,a,b}$ given by the equation $$ y^d=ax\text{Tr}(x)+b,$$ where $\text{Tr}$ denote the trace function from $\mathbb F_{q^n}$ to $\mathbb F_{q}$ and $d$ is a positive integer. In particular, we present bounds for the number of $\mathbb F_{q}$-rational points on $\mathcal{X}_{d,a,b}$ and, for the… ▽ More In this paper, we study the number of $\mathbb F_{q^n}$-rational points on the affine curve $\mathcal{X}_{d,a,b}$ given by the equation $$ y^d=ax\text{Tr}(x)+b,$$ where $\text{Tr}$ denote the trace function from $\mathbb F_{q^n}$ to $\mathbb F_{q}$ and $d$ is a positive integer. In particular, we present bounds for the number of $\mathbb F_{q}$-rational points on $\mathcal{X}_{d,a,b}$ and, for the cases where $d$ satisfies a natural condition, explicit formulas for the number of rational points are obtained. Particularly, a complete characterization is given for the case $d=2$. As a consequence of our results, we compute the number of elements $α$ in $\mathbb F_{q^n}$ such that $α$ and $\text{Tr}(α)$ are quadratic residues in $\mathbb F_{q^n}$. △ Less

Submitted 14 September, 2022; originally announced September 2022.

MSC Class: 12E20 (primary) and 11G20 (secondary)

When Bioprocess Engineering Meets Machine Learning: A Survey from the Perspective of Automated Bioprocess Development

Authors: Nghia Duong-Trung, Stefan Born, Jong Woo Kim, Marie-Therese Schermeyer, Katharina Paulick, Maxim Borisyak, Mariano Nicolas Cruz-Bournazou, Thorben Werner, Randolf Scholz, Lars Schmidt-Thieme, Peter Neubauer, Ernesto Martinez

Abstract: Machine learning (ML) is becoming increasingly crucial in many fields of engineering but has not yet played out its full potential in bioprocess engineering. While experimentation has been accelerated by increasing levels of lab automation, experimental planning and data modeling are still largerly depend on human intervention. ML can be seen as a set of tools that contribute to the automation of… ▽ More Machine learning (ML) is becoming increasingly crucial in many fields of engineering but has not yet played out its full potential in bioprocess engineering. While experimentation has been accelerated by increasing levels of lab automation, experimental planning and data modeling are still largerly depend on human intervention. ML can be seen as a set of tools that contribute to the automation of the whole experimental cycle, including model building and practical planning, thus allowing human experts to focus on the more demanding and overarching cognitive tasks. First, probabilistic programming is used for the autonomous building of predictive models. Second, machine learning automatically assesses alternative decisions by planning experiments to test hypotheses and conducting investigations to gather informative data that focus on model selection based on the uncertainty of model predictions. This review provides a comprehensive overview of ML-based automation in bioprocess development. On the one hand, the biotech and bioengineering community should be aware of the potential and, most importantly, the limitation of existing ML solutions for their application in biotechnology and biopharma. On the other hand, it is essential to identify the missing links to enable the easy implementation of ML and Artificial Intelligence (AI) tools in valuable solutions for the bio-community. △ Less

Submitted 1 November, 2022; v1 submitted 2 September, 2022; originally announced September 2022.