Showing 1–50 of 794 results for author: Martínez, A

Digital twins to alleviate the need for real field data in vision-based vehicle speed detection systems

Authors: Antonio Hernández Martínez, Iván García Daza, Carlos Fernández López, David Fernández Llorca

Abstract: Accurate vision-based speed estimation is much more cost-effective than traditional methods based on radar or LiDAR. However, it is also challenging due to the limitations of perspective projection on a discrete sensor, as well as the high sensitivity to calibration, lighting and weather conditions. Interestingly, deep learning approaches (which dominate the field of computer vision) are very limi… ▽ More Accurate vision-based speed estimation is much more cost-effective than traditional methods based on radar or LiDAR. However, it is also challenging due to the limitations of perspective projection on a discrete sensor, as well as the high sensitivity to calibration, lighting and weather conditions. Interestingly, deep learning approaches (which dominate the field of computer vision) are very limited in this context due to the lack of available data. Indeed, obtaining video sequences of real road traffic with accurate speed values associated with each vehicle is very complex and costly, and the number of available datasets is very limited. Recently, some approaches are focusing on the use of synthetic data. However, it is still unclear how models trained on synthetic data can be effectively applied to real world conditions. In this work, we propose the use of digital-twins using CARLA simulator to generate a large dataset representative of a specific real-world camera. The synthetic dataset contains a large variability of vehicle types, colours, speeds, lighting and weather conditions. A 3D CNN model is trained on the digital twin and tested on the real sequences. Unlike previous approaches that generate multi-camera sequences, we found that the gap between the the real and the virtual conditions is a key factor in obtaining low speed estimation errors. Even with a preliminary approach, the mean absolute error obtained remains below 3km/h. △ Less

Submitted 11 July, 2024; originally announced July 2024.

Comments: Paper accepted at the 27th IEEE International Conference on Intelligent Transportation Systems (ITSC 2024)

Longitudinal chiral forces in photonic integrated waveguides to separate particles with realistically small chirality

Authors: Josep Martínez-Romeu, Iago Diez, Sebastian Golat, Francisco J. Rodríguez-Fortuño, Alejandro Martínez

Abstract: Chiral optical forces exhibit opposite signs for the two enantiomeric versions of a chiral molecule or particle. If large enough, these forces might be able to separate enantiomers all optically, which would find numerous applications in different fields, from pharmacology to chemistry. Longitudinal chiral forces are especially promising for tackling the challenging scenario of separating particle… ▽ More Chiral optical forces exhibit opposite signs for the two enantiomeric versions of a chiral molecule or particle. If large enough, these forces might be able to separate enantiomers all optically, which would find numerous applications in different fields, from pharmacology to chemistry. Longitudinal chiral forces are especially promising for tackling the challenging scenario of separating particles of realistically small chiralities. In this work, we study the longitudinal chiral forces arising in dielectric integrated waveguides when the quasi-TE and quasi-TM modes are combined as well as their application to separate absorbing and non-absorbing chiral particles. We show that chiral gradient forces dominate in the scenario of beating of non-denegerate TE and TM modes when considering non-absorbing particles. For absorbing particles, the superposition of degenerate TE and TM modes can lead to chiral forces that are kept along the whole waveguide length. We accompany the calculations of the forces with particle tracking simulations for specific radii and chirality parameters. We show that longitudinal forces can separate non-absorbing chiral nanoparticles in water even for relatively low values of the particle chirality and absorbing particles with arbitrarily low values of chirality can be effectively separated after enough interaction time. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Comments: 23 pages, 10 figures

Scaling of symmetry-restricted quantum circuits

Authors: Maximilian Balthasar Mansky, Miguel Armayor Martinez, Alejandro Bravo de la Serna, Santiago Londoño Castillo, Dimitra Nikoladou, Gautham Sathish, Zhihao Wang, Sebastian Wölckert, Claudia Linnhoff-Popien

Abstract: The intrinsic symmetries of physical systems have been employed to reduce the number of degrees of freedom of systems, thereby simplifying computations. In this work, we investigate the properties of $\mathcal{M}SU(2^N)$, $\mathcal{M}$-invariant subspaces of the special unitary Lie group $SU(2^N)$ acting on $N$ qubits, for some $\mathcal{M}\subseteq M_{2^N}(\mathbb{C})$. We demonstrate that for ce… ▽ More The intrinsic symmetries of physical systems have been employed to reduce the number of degrees of freedom of systems, thereby simplifying computations. In this work, we investigate the properties of $\mathcal{M}SU(2^N)$, $\mathcal{M}$-invariant subspaces of the special unitary Lie group $SU(2^N)$ acting on $N$ qubits, for some $\mathcal{M}\subseteq M_{2^N}(\mathbb{C})$. We demonstrate that for certain choices of $\mathcal{M}$, the subset $\mathcal{M}SU(2^N)$ inherits many topological and group properties from $SU(2^N)$. We then present a combinatorial method for computing the dimension of such subspaces when $\mathcal{M}$ is a representation of a permutation group acting on qubits $(GSU(2^N))$, or a Hamiltonian $(H^{(N)}SU(2^N))$. The Kronecker product of $\mathfrak{su}(2)$ matrices is employed to construct the Lie algebras associated with different permutation-invariant groups $GSU(2^N)$. Numerical results on the number of dimensions support the the developed theory. △ Less

Submitted 14 June, 2024; originally announced June 2024.

Comments: 27 pages, 6 figures, 1 table

Cascaded injection locking of optomechanical crystal oscillators

Authors: David Alonso-Tomás, Guillermo Arregui, Laura Mercadé, Alejandro Martínez, Amadeu Griol, Néstor E. Capuj, Daniel Navarro-Urrios

Abstract: Optomechanical oscillators stand out as high-performance and versatile candidates for serving as reference clocks in sequential photonic integrated circuits. Indeed, they have the unique capability of simultaneously generating mechanical tones and optical signal modulations at frequencies determined by their geometrical design. In this context, the concept of synchronization introduces a powerful… ▽ More Optomechanical oscillators stand out as high-performance and versatile candidates for serving as reference clocks in sequential photonic integrated circuits. Indeed, they have the unique capability of simultaneously generating mechanical tones and optical signal modulations at frequencies determined by their geometrical design. In this context, the concept of synchronization introduces a powerful means to precisely coordinate the dynamics of multiple oscillators in a controlled manner, thus increasing efficiency and preventing errors in signal processing photonic systems or communication interfaces. In this work, we demonstrate the cascaded injection locking of a pair of silicon-based optomechanical crystal cavities to an external reference signal that subtly modulates the laser driving one of the oscillators. Both cavities interact solely through a weak mechanical link, making the extension of this synchronization mechanism to an increased number of optomechanical oscillators within a common chip more feasible than relying solely on optical interactions. Thus, the combination of the obtained results, supported by a numerical model, with remote optical injection locking schemes discussed in the literature, lays the groundwork for the distribution of reference signals within large networks of processing elements in future phonon-photon hybrid circuits. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Self-Adaptive Integrated Photonic Receiver for Turbulence Compensation in Free Space Optical Links

Authors: Andres Ivan Martinez, Gabriele Cavicchioli, Seyedmohammad Seyedinnavadeh, Francesco Zanetto, Marco Sampietro, Alessandro DAcierno, Francesco Morichetti, Andrea Melloni

Abstract: In Free Space Optical (FSO) communication systems, atmospheric turbulence distorts the propagating beams, causing a random fading in the received power. This perturbation can be compensated using a multi-aperture receiver that samples the distorted wavefront on different points and adds the various signals coherently. In this work, we report on an adaptive optical receiver that compensates in real… ▽ More In Free Space Optical (FSO) communication systems, atmospheric turbulence distorts the propagating beams, causing a random fading in the received power. This perturbation can be compensated using a multi-aperture receiver that samples the distorted wavefront on different points and adds the various signals coherently. In this work, we report on an adaptive optical receiver that compensates in real time for scintillation in FSO links. The optical front-end of the receiver is entirely integrated in a silicon photonic chip hosting a 2D Optical Antenna Array and a self-adaptive analog Programmable Optical Processor made of a mesh of tunable Mach-Zehnder interferometers. The photonic chip acts as an adaptive interface to couple turbulent FSO beams to single-mode guided optics, enabling energy and cost-effective operation, scalability to systems with a larger number of apertures, modulation-format and data-protocol transparency, and pluggability with commercial fiber optics transceivers. Experimental results demonstrate the effectiveness of the proposed receiver with optical signals at a data rate of 10 Gbit/s transmitted in indoor FSO links where different turbulent conditions, even stronger than those expected in outdoor links of hundreds of meters, are reproduced. △ Less

Submitted 8 June, 2024; originally announced June 2024.

Experimental Evaluation of All-Optical Up- and Down-Conversion of 3GPP 5G NR Signals using an Optomechanical Crystal Cavity Frequency Comb

Authors: Vicente Fito, Raúl Ortiz, Maria Morant, Laura Mercadé, Roberto Llorente, Alejandro Martínez

Abstract: Optomechanical crystal cavities (OMCCs) allow the interaction between localized optical and mechanical modes through the radiation-pressure force. Driving such cavities with blue-detuned lasers relative to the optical resonance can induce a phonon lasing regime where the OMCC supports self-sustained mechanical oscillations. This dynamic state results in a narrow and stable microwave tone that modu… ▽ More Optomechanical crystal cavities (OMCCs) allow the interaction between localized optical and mechanical modes through the radiation-pressure force. Driving such cavities with blue-detuned lasers relative to the optical resonance can induce a phonon lasing regime where the OMCC supports self-sustained mechanical oscillations. This dynamic state results in a narrow and stable microwave tone that modulates the laser at integer multiples of the mechanical resonance frequency, ultimately creating an optomechanical (OM) frequency comb suitable for microwave photonics applications. OMCCs enable compact, low-cost power-efficient all-photonic processing of multiple microwave signals, crucial for current 5G and future beyond-5G systems, whilst being compatible with silicon integrated photonic circuits. This work reports the experimental demonstration of all-optical multi-frequency up- and down-conversion of 3GPP 5G new-radio (NR) signals from the low- to mid- and extended-mid bands using the first and second harmonics of the frequency comb generated in a silicon OMCC. The OM comb generates up to 6 harmonics in the K-band, which is suitable for microwave photonic applications. The experimental demonstration also evaluates the impact of the phase-noise and the signal-to-noise ratio (SNR) in the frequency-converted 5G NR signals when the first and second OMCC harmonics are employed for frequency conversion. △ Less

Submitted 7 June, 2024; originally announced June 2024.

Heuristic evaluations of back support, shoulder support, hand grip strength support, and sit-stand support exoskeletons using universal design principles

Authors: Alejandra Martinez, Laura Tovar, Carla Irigoyen Amparan, Karen Gonzalez, Pra**a Edayath, Priyadarshini Pennathur, Arunkumar Pennathur

Abstract: Occupational exoskeletons promise to reduce the incidence of musculoskeletal injuries; however, we do not know if their designs allow universal use by all workers. We also do not know how easy the tasks of assembling, donning, doffing, and disassembling exoskeletons are. The purpose of our study was to heuristically evaluate a back support, a shoulder support, a handgrip strength support, and a si… ▽ More Occupational exoskeletons promise to reduce the incidence of musculoskeletal injuries; however, we do not know if their designs allow universal use by all workers. We also do not know how easy the tasks of assembling, donning, doffing, and disassembling exoskeletons are. The purpose of our study was to heuristically evaluate a back support, a shoulder support, a handgrip strength support, and a sit-stand exoskeleton for how well they are designed for universal use when assembling, donning, doffing, and disassembling the exoskeleton. Seven evaluators used universal design principles and associated criteria to independently evaluate and rate four exoskeletons when assembling, donning, doffing, and disassembling the devices. The rating scale was a Likert-type scale, where a rating of 1 represented not at all, and a rating of 5 represented an excellent design with respect to the universal design criteria for the task. The results indicate that providing perceptible information to the user, making the design equitable to use for a diverse set of users, making the design simple and intuitive to use with adequate feedback, and designing to prevent user errors, and when errors are made, allowing the user to recover quickly from the errors, were rated poorly. Assembling and donning tasks presented the most challenges. △ Less

Submitted 31 May, 2024; originally announced May 2024.

A Digital Beamforming Receiver Architecture Implemented on a FPGA for Space Applications

Authors: Eduardo Ortega, Agustín Martínez, Antonio Oliva, Fernando Sanz, Oscar Rodríguez, Manuel Prieto, Pablo Parra, Antonio Da Silva, Sebastián Sánchez

Abstract: The burgeoning interest within the space community in digital beamforming is largely attributable to the superior flexibility that satellites with active antenna systems offer for a wide range of applications, notably in communication services. This paper delves into the analysis and practical implementation of a Digital Beamforming and Digital Down Conversion (DDC) chain, leveraging a high-speed… ▽ More The burgeoning interest within the space community in digital beamforming is largely attributable to the superior flexibility that satellites with active antenna systems offer for a wide range of applications, notably in communication services. This paper delves into the analysis and practical implementation of a Digital Beamforming and Digital Down Conversion (DDC) chain, leveraging a high-speed Analog-to-Digital Converter (ADC) certified for space applications alongside a high-performance Field-Programmable Gate Array (FPGA). The proposed design strategy focuses on optimizing resource efficiency and minimizing power consumption by strategically sequencing the beamformer processor ahead of the complex down-conversion operation. This innovative approach entails the application of demodulation and low-pass filtering exclusively to the aggregated beam channel, culminating in a marked reduction in the requisite digital signal processing resources relative to traditional, more resource-intensive digital beamforming and DDC architectures. In the experimental validation, an evaluation board integrating a high-speed ADC and a FPGA was utilized. This setup facilitated the empirical validation of the design's efficacy by applying various RF input signals to the digital beamforming receiver system. The ADC employed is capable of high-resolution signal processing, while the FPGA provides the necessary computational flexibility and speed for real-time digital signal processing tasks. The findings underscore the potential of this design to significantly enhance the efficiency and performance of digital beamforming systems in space applications. △ Less

Submitted 29 May, 2024; originally announced May 2024.

Spectral analysis of block preconditioners for double saddle-point linear systems with application to PDE-constrained optimization

Authors: Luca Bergamaschi, Angeles Martinez, John Pearson, Andreas Potschka

Abstract: In this paper, we describe and analyze the spectral properties of a symmetric positive definite inexact block preconditioner for a class of symmetric, double saddle-point linear systems. We develop a spectral analysis of the preconditioned matrix, showing that its eigenvalues can be described in terms of the roots of a cubic polynomial with real coefficients. We illustrate the efficiency of th… ▽ More In this paper, we describe and analyze the spectral properties of a symmetric positive definite inexact block preconditioner for a class of symmetric, double saddle-point linear systems. We develop a spectral analysis of the preconditioned matrix, showing that its eigenvalues can be described in terms of the roots of a cubic polynomial with real coefficients. We illustrate the efficiency of the proposed preconditioners, and verify the theoretical bounds, in solving large-scale PDE-constrained optimization problems. △ Less

Submitted 24 May, 2024; v1 submitted 23 May, 2024; originally announced May 2024.

A Versatile Diffusion Transformer with Mixture of Noise Levels for Audiovisual Generation

Authors: Gwanghyun Kim, Alonso Martinez, Yu-Chuan Su, Brendan Jou, José Lezama, Agrim Gupta, Lijun Yu, Lu Jiang, Aren Jansen, Jacob Walker, Krishna Somandepalli

Abstract: Training diffusion models for audiovisual sequences allows for a range of generation tasks by learning conditional distributions of various input-output combinations of the two modalities. Nevertheless, this strategy often requires training a separate model for each task which is expensive. Here, we propose a novel training approach to effectively learn arbitrary conditional distributions in the a… ▽ More Training diffusion models for audiovisual sequences allows for a range of generation tasks by learning conditional distributions of various input-output combinations of the two modalities. Nevertheless, this strategy often requires training a separate model for each task which is expensive. Here, we propose a novel training approach to effectively learn arbitrary conditional distributions in the audiovisual space.Our key contribution lies in how we parameterize the diffusion timestep in the forward diffusion process. Instead of the standard fixed diffusion timestep, we propose applying variable diffusion timesteps across the temporal dimension and across modalities of the inputs. This formulation offers flexibility to introduce variable noise levels for various portions of the input, hence the term mixture of noise levels. We propose a transformer-based audiovisual latent diffusion model and show that it can be trained in a task-agnostic fashion using our approach to enable a variety of audiovisual generation tasks at inference time. Experiments demonstrate the versatility of our method in tackling cross-modal and multimodal interpolation tasks in the audiovisual space. Notably, our proposed approach surpasses baselines in generating temporally and perceptually consistent samples conditioned on the input. Project page: avdit2024.github.io △ Less

Submitted 22 May, 2024; originally announced May 2024.

Stationary surfaces of height-dependent weighted area functionals in $\mathbb{R}^3$ and $\mathbb{L}^3$

Authors: Antonio Martínez, A. L. Martínez-Triviño, J. P. dos Santos

Abstract: We describe a general correspondence between weighted minimal surfaces in $\mathbb{R}^3$ and weighted maximal surfaces with some admissible singularities in $\mathbb{L}^3$, for a class of functions $\varphi$ which provides the corresponding weight. For these families of surfaces, we provide a Weierstrass representation when $\dot{\varphi}\neq 0$ and analyze in detail the asymptotic behavior of bot… ▽ More We describe a general correspondence between weighted minimal surfaces in $\mathbb{R}^3$ and weighted maximal surfaces with some admissible singularities in $\mathbb{L}^3$, for a class of functions $\varphi$ which provides the corresponding weight. For these families of surfaces, we provide a Weierstrass representation when $\dot{\varphi}\neq 0$ and analyze in detail the asymptotic behavior of both such a weighted maximal surface around its singular set and its corresponding weighted minimal immersion around the nodal set of its angle function, establishing criteria that allow us to easily determine the type of singularity and classify the associated moduli spaces. △ Less

Submitted 21 May, 2024; originally announced May 2024.

Tunable Giant Anomalous Hall in a Kondo Lattice Ferromagnet UBiTe

Authors: Qiaozhi Xu, Hasan Siddiquee, Shannon Gould, Jiahui Althena Zhu, David Alonso Martinez, Christopher Broyles, Tai Kong, Sheng Ran

Abstract: Kondo lattice systems are recognized for potentially hosting a variety of rich topological phases. Several pioneering studies have demonstrated significant anomalous Hall and anomalous Nernst effects in these systems, attributed to the Berry curvature of the hybridization bands. In this study, we investigate UBiTe, a ferromagnetic Kondo lattice system. Our findings reveal that the intrinsic contri… ▽ More Kondo lattice systems are recognized for potentially hosting a variety of rich topological phases. Several pioneering studies have demonstrated significant anomalous Hall and anomalous Nernst effects in these systems, attributed to the Berry curvature of the hybridization bands. In this study, we investigate UBiTe, a ferromagnetic Kondo lattice system. Our findings reveal that the intrinsic contribution to the anomalous Hall conductivity is closely tied to the Kondo coherence temperature. Moreover, we demonstrate that slight shifts in the Fermi level across three different samples significantly influence this intrinsic contribution, in alignment with the Berry curvature localized within the narrow hybridization bands. This provides a stark contrast to the less pronounced sensitivity observed in weakly correlated Weyl semimetals, underscoring the distinctive electronic properties of Kondo lattice systems. The anomalous Hall conductivity of one samples ranks among the highest reported for topological magnetic materials. △ Less

Submitted 20 May, 2024; originally announced May 2024.

Identifying stable communities in Hi-C data using a multifractal null model

Authors: Lucas Hedström, Antón Carcedo Martínez, Ludvig Lizana

Abstract: Chromosome capture techniques like Hi-C have expanded our understanding of mammalian genome 3D architecture and how it influences gene activity. To analyze Hi-C data sets, researchers increasingly treat them as DNA-contact networks and use standard community detection techniques to identify mesoscale 3D communities. However, there are considerable challenges in finding significant communities beca… ▽ More Chromosome capture techniques like Hi-C have expanded our understanding of mammalian genome 3D architecture and how it influences gene activity. To analyze Hi-C data sets, researchers increasingly treat them as DNA-contact networks and use standard community detection techniques to identify mesoscale 3D communities. However, there are considerable challenges in finding significant communities because the Hi-C networks have cross-scale interactions and are almost fully connected. This paper presents a pipeline to distil 3D communities that remain intact under experimental noise. To this end, we bootstrap an ensemble of Hi-C datasets representing noisy data and extract 3D communities that we compare with the unperturbed dataset. Notably, we extract the communities by maximizing local modularity (using the Generalized Louvain method), which considers the multifractal spectrum recently discovered in Hi-C maps. Our pipeline finds that stable communities (under noise) typically have above-average internal contact frequencies and tend to be enriched in active chromatin marks. We also find they fold into more nested cross-scale hierarchies than less stable ones. Apart from presenting how to systematically extract robust communities in Hi-C data, our paper offers new ways to generate null models that take advantage of the network's multifractal properties. We anticipate this has a broad applicability to several network applications. △ Less

Submitted 8 May, 2024; originally announced May 2024.

A new modular plethystic $\mathrm{SL}_2(\mathbb{F})$-isomorphism $\mathrm{Sym}^{N-1}E \otimes \bigwedge^{N+1} \mathrm{Sym}^{d+1}E \cong Δ^{(2,1^{N-1})} \mathrm{Sym}^d E$

Authors: Alvaro L. Martinez, Mark Wildon

Abstract: Let $\mathbb{F}$ be a field and let $E$ be the natural representation of $\mathrm{SL}_2(\mathbb{F})$. Given a vector space $V$, let $Δ^{(2,1^{N-1})}V$ be the kernel of the multiplication map $\bigwedge^N V \otimes V \rightarrow \bigwedge^{N+1}V$. We construct an explicit $\mathrm{SL}_2(\mathbb{F})$-isomorphism… ▽ More Let $\mathbb{F}$ be a field and let $E$ be the natural representation of $\mathrm{SL}_2(\mathbb{F})$. Given a vector space $V$, let $Δ^{(2,1^{N-1})}V$ be the kernel of the multiplication map $\bigwedge^N V \otimes V \rightarrow \bigwedge^{N+1}V$. We construct an explicit $\mathrm{SL}_2(\mathbb{F})$-isomorphism $\mathrm{Sym}^{N-1}E \otimes \bigwedge^{N+1} \mathrm{Sym}^{d+1}E \cong Δ^{(2,1^{N-1})} \mathrm{Sym}^d E$. This $\mathrm{SL}_2(\mathbb{F})$-isomorphism is a modular lift of the $q$-binomial identity $q^{\frac{N(N-1)}{2}}[N]_q \binom{d+1}{N+1}_q = s_{(2,1^{N-1})}(1,q,\ldots, q^d)$, where $s_{(2,1^{N-1})}$ is the Schur function for the partition $(2,1^{N-1})$. This identity, which follows from our main theorem, implies the existence of an isomorphism when $\mathbb{F}$ is the field of complex numbers but it is notable, and not typical of the general case, that there is an explicit isomorphism defined in a uniform way for any field. △ Less

Submitted 7 May, 2024; originally announced May 2024.

Comments: 16 pages, 1 figure

MSC Class: 20C20 (Primary) 05E05; 05E10; 17B10; 20G05 (Secondary)

Prioritizing High-Precision Photometric Monitoring of Exoplanet and Brown Dwarf Companions with JWST -- Strategic Exoplanet Initiatives with HST and JWST White Paper

Authors: Ben J. Sutlieff, Xueqing Chen, Pengyu Liu, Emma E. Bubb, Stanimir A. Metchev, Brendan P. Bowler, Johanna M. Vos, Raquel A. Martinez, Genaro Suárez, Yifan Zhou, Samuel M. Factor, Zhoujian Zhang, Emily L. Rickman, Arthur D. Adams, Elena Manjavacas, Julien H. Girard, Bokyoung Kim, Trent J. Dupuy

Abstract: We advocate for the prioritization of high-precision photometric monitoring of exoplanet and brown dwarf companions to detect brightness variability arising from features in their atmospheres. Measurements of photometric variability provide not only an insight into the physical appearances of these companions, but are also a direct probe of their atmospheric structures and dynamics, and yield valu… ▽ More We advocate for the prioritization of high-precision photometric monitoring of exoplanet and brown dwarf companions to detect brightness variability arising from features in their atmospheres. Measurements of photometric variability provide not only an insight into the physical appearances of these companions, but are also a direct probe of their atmospheric structures and dynamics, and yield valuable estimates of their rotation periods. JWST is uniquely capable of monitoring faint exoplanet companions over their full rotation periods, thanks to its inherent stability and powerful high-contrast coronagraphic imaging modes. Rotation period measurements can be further combined with measurements of v sin i obtained using high-resolution spectroscopy to infer the viewing angle of a companion. Photometric monitoring over multiple rotation periods and at multiple epochs will allow both short- and long-term time evolution in variability signals to be traced. Furthermore, the differences between the layers in a companion's atmosphere can be probed by obtaining simultaneous photometric monitoring at different wavelengths through NIRCam dual-band coronagraphy. Overall, JWST will reach the highest sensitivities to variability to date and enable the light curves of substellar companions to be characterised with unprecedented cadence and precision at the sub-percent level. △ Less

Submitted 1 May, 2024; originally announced May 2024.

Comments: 4 pages, 2 figures, white paper submitted in response to the call by the Working Group on Strategic Exoplanet Initiatives with HST and JWST (details at https://outerspace.stsci.edu/display/HPR/Strategic+Exoplanet+Initiatives+with+HST+and+JWST & final report at arXiv:2404.02932), adapted to include author list and affiliations

Generalizing Roberts' characterization of unit interval graphs

Authors: Virginia Ardévol Martínez, Romeo Rizzi, Abdallah Saffidine, Florian Sikora, Stéphane Vialette

Abstract: For any natural number $d$, a graph $G$ is a (disjoint) $d$-interval graph if it is the intersection graph of (disjoint) $d$-intervals, the union of $d$ (disjoint) intervals on the real line. Two important subclasses of $d$-interval graphs are unit and balanced $d$-interval graphs (where every interval has unit length or all the intervals associated to a same vertex have the same length, respectiv… ▽ More For any natural number $d$, a graph $G$ is a (disjoint) $d$-interval graph if it is the intersection graph of (disjoint) $d$-intervals, the union of $d$ (disjoint) intervals on the real line. Two important subclasses of $d$-interval graphs are unit and balanced $d$-interval graphs (where every interval has unit length or all the intervals associated to a same vertex have the same length, respectively). A celebrated result by Roberts gives a simple characterization of unit interval graphs being exactly claw-free interval graphs. Here, we study the generalization of this characterization for $d$-interval graphs. In particular, we prove that for any $d \geq 2$, if $G$ is a $K_{1,2d+1}$-free interval graph, then $G$ is a unit $d$-interval graph. However, somehow surprisingly, under the same assumptions, $G$ is not always a \emph{disjoint} unit $d$-interval graph. This implies that the class of disjoint unit $d$-interval graphs is strictly included in the class of unit $d$-interval graphs. Finally, we study the relationships between the classes obtained under disjoint and non-disjoint $d$-intervals in the balanced case and show that the classes of disjoint balanced 2-intervals and balanced 2-intervals coincide, but this is no longer true for $d>2$. △ Less

Submitted 27 April, 2024; originally announced April 2024.

High Contrast, High Angular Resolution Optical Speckle Imaging: Uncovering Hidden Stellar Companions

Authors: Steve B. Howell, Arturo O. Martinez, Douglas A. Hope, David R. Ciardi, Stuart M. Jefferies, Fabien R. Baron, Michael B. Lund

Abstract: We explore the possibility of detecting very faint, very close-in stellar companions using large aperture ground-based telescopes and the technique of optical speckle imaging. We examine the state of high angular resolution speckle imaging and contrast levels being achieved using current speckle cameras on the Gemini 8-m telescope. We then explore the use of the modern image reconstruction techniq… ▽ More We explore the possibility of detecting very faint, very close-in stellar companions using large aperture ground-based telescopes and the technique of optical speckle imaging. We examine the state of high angular resolution speckle imaging and contrast levels being achieved using current speckle cameras on the Gemini 8-m telescope. We then explore the use of the modern image reconstruction technique - Multi-Frame Blind Deconvolution (MFBD) - applied to speckle imaging from the Gemini 8-m telescope. We show that MFBD allows us to measure the flux ratio of the imaged stars to high accuracy and the reconstructed images yield higher precision astrometry. Both of these advances provide a large refinement in the derived astrophysical parameters compared with current Fourier techniques. MFBD image reconstructions reach contrast levels of $\sim$5$\times$10$^{-3}$, near the diffraction limit, to $\sim$10$^{-4}$ about 1.0 arcsec away. At these deep contrast levels with angular limits starting near the 8-m diffraction limit ($\sim$20 mas), most stellar companions to a solar-like stars can be imaged in the optical to near-IR bandpass (320-1000 nm). △ Less

Submitted 23 April, 2024; originally announced April 2024.

Comments: 12 pages, 6 figures, accepted for publication in The Astronomical Journal

Evidence for charge mediated coupling in Fe-Ga/PMN-PT composite multiferroic

Authors: M. Tortarolo, D. Goijman, M. A. Barral, S. Di Napoli, A. A. Pérez Martínez, G. Ramírez, A. Sarmiento, J. Gómez, A. Zakharova, S. E. Bayram, F. Stramaglia, C. A. F. Vaz, J. Milano, C. Piamonteze

Abstract: We present an experimental study of the magnetoelectric coupling (MEC) in the Fe-Ga/PMN-PT thin film multiferroic composite by means of x-ray magnetic circular dichroism (XMCD) and ferromagnetic resonance (FMR). Our measurements show evidence for a charge mediated coupling mechanism, suggested by the asymmetric magnetic remanence (M$_{rem}$) behaviour under opposite electric fields ($\pm$ E) and t… ▽ More We present an experimental study of the magnetoelectric coupling (MEC) in the Fe-Ga/PMN-PT thin film multiferroic composite by means of x-ray magnetic circular dichroism (XMCD) and ferromagnetic resonance (FMR). Our measurements show evidence for a charge mediated coupling mechanism, suggested by the asymmetric magnetic remanence (M$_{rem}$) behaviour under opposite electric fields ($\pm$ E) and the asymmetric resonance field (H$_r$) in the FMR measurements. Also, the FMR measurements reveal a perpendicular magnetic anisotropy (PMA), that can be related to an interface charge effect. and it is tunable by E field. Ab initio calculations support the existence of a charge mediated coupling at the Fe-Ga/PMN-PT interface. △ Less

Submitted 5 April, 2024; originally announced April 2024.

Comments: 7 pages, 5 figures, Supplemental Material

Exact Solutions of Stochastic Burgers-KdV Equation with variable coefficients

Authors: Kolade Adjibi, Allan Martinez, Miguel Mascorro, Carlos Montes, Tamer Oraby, Rita Sandoval, Erwin Suazo

Abstract: We will present exact solutions for three variations of stochastic Korteweg de Vries-Burgers (KdV-Burgers) equation featuring variable coefficients. In each variant, white noise exhibits spatial uniformity, and the three categories include additive, multiplicative, and advection noise. Across all cases, the coefficients are time-dependent functions. Our discovery indicates that solving certain det… ▽ More We will present exact solutions for three variations of stochastic Korteweg de Vries-Burgers (KdV-Burgers) equation featuring variable coefficients. In each variant, white noise exhibits spatial uniformity, and the three categories include additive, multiplicative, and advection noise. Across all cases, the coefficients are time-dependent functions. Our discovery indicates that solving certain deterministic counterparts of KdV-Burgers equations and composing the solution with a solution of stochastic differential equations leads to the exact solution of the stochastic Korteweg de Vries-Burgers (KdV-Burgers) equations. △ Less

Submitted 28 March, 2024; originally announced March 2024.

Cell Electropermeabilization Modeling via Multiple Traces Formulation and Time Semi-Implicit Coupling

Authors: Isabel A. Martínez Ávila, Carlos Jerez-Hanckes, Irina Pettersson

Abstract: We simulate the electrical response of multiple disjoint biological 3D cells in the electropermeabilization process. Instead of solving the boundary value problem in the volume, we reduce it to a system of boundary integrals equations with nonlinear dynamics on the cell membranes via a coupling the local Multiple Traces Formulation with a time semi-implicit scheme. Spatially, boundary unknowns are… ▽ More We simulate the electrical response of multiple disjoint biological 3D cells in the electropermeabilization process. Instead of solving the boundary value problem in the volume, we reduce it to a system of boundary integrals equations with nonlinear dynamics on the cell membranes via a coupling the local Multiple Traces Formulation with a time semi-implicit scheme. Spatially, boundary unknowns are approximated by spherical harmonics, thereby allowing for spectral convergence rates for suitable time steps. Numerical results are provided to validate our claims. △ Less

Submitted 28 March, 2024; originally announced March 2024.

MSC Class: 65M38; 65R20; 65Z05

Optomechanical cavities based on epitaxial GaP on nominally (001)-oriented Si

Authors: Paula Mouriño, Laura Mercadé, Miguel Sinusía Lozano, Raquel Resta, Amadeu Griol, Karim Ben Saddik, Enrique Barrigón, Sergio Fernández-Garrido, Basilio Javier García, Alejandro Martínez, Víctor J. Gómez

Abstract: Gallium phosphide (GaP) has recently received considerable attention as a suitable material for building photonic integrated circuits due to its remarkable optical and piezoelectric properties. Usually, GaP is grown epitaxially on III-V substrates to keep its crystallinity and later transferred to silicon wafers for further processing. Here, an alternative promising route for the fabrication of op… ▽ More Gallium phosphide (GaP) has recently received considerable attention as a suitable material for building photonic integrated circuits due to its remarkable optical and piezoelectric properties. Usually, GaP is grown epitaxially on III-V substrates to keep its crystallinity and later transferred to silicon wafers for further processing. Here, an alternative promising route for the fabrication of optomechanical (OM) cavities on GaP epitaxially grown on nominally (001)-oriented Si is introduced by using a two-step process consisting of a low-temperature etching of GaP followed by selective etching of the underneath silicon. The low-temperature (-30 $^o$C) during the dry-etching of GaP hinders the lateral etching rate, preserving the pattern with a deviation between the design and the pattern in the GaP layer lower than 5 %, avoiding the complex process of transferring and bonding a GaP wafer to a silicon-on-insulator wafer. To demonstrate the quality and feasibility of the proposed fabrication route, suspended OM cavities are fabricated and experimentally characterized. The cavities show optical quality factors between 10$^3$ and 10$^4$, and localized mechanical resonances at frequencies around 3.1 GHz. Both optical and mechanical resonances are close to those previously reported on crystalline GaP structures. These results suggest a simple and low-cost way to build GaP-based photonic devices directly integrated on industry-standard Si(001) photonic wafers. △ Less

Submitted 28 March, 2024; originally announced March 2024.

Comments: 11 pages, 5 figures

Optimal Hospital Capacity Management During Demand Surges

Authors: Felix Parker, Fardin Ganjkhanloo, Diego A. Martínez, Kimia Ghobadi

Abstract: Effective hospital capacity management is pivotal for enhancing patient care quality, operational efficiency, and healthcare system resilience, notably during demand spikes like those seen in the COVID-19 pandemic. However, devising optimal capacity strategies is complicated by fluctuating demand, conflicting objectives, and multifaceted practical constraints. This study presents a data-driven fra… ▽ More Effective hospital capacity management is pivotal for enhancing patient care quality, operational efficiency, and healthcare system resilience, notably during demand spikes like those seen in the COVID-19 pandemic. However, devising optimal capacity strategies is complicated by fluctuating demand, conflicting objectives, and multifaceted practical constraints. This study presents a data-driven framework to optimize capacity management decisions within hospital systems during surge events. Two key decisions are optimized over a tactical planning horizon: allocating dedicated capacity to surge patients and transferring incoming patients between emergency departments (EDs) of hospitals to better distribute demand. The optimization models are formulated as robust mixed-integer linear programs, enabling efficient computation of optimal decisions that are robust against demand uncertainty. The models incorporate practical constraints and costs, including setup times and costs for adding surge capacity, restrictions on ED patient transfers, and relative costs of different decisions that reflect impacts on care quality and operational efficiency. The methodology is evaluated retrospectively in a hospital system during the height of the COVID-19 pandemic to demonstrate the potential impact of the recommended decisions. The results show that optimally allocating beds and transferring just 32 patients over a 63 day period around the peak, about one transfer every two days, could have reduced the need for surge capacity in the hospital system by nearly 90%. Overall, this work introduces a practical tool to transform capacity management decision-making, enabling proactive planning and the use of data-driven recommendations to improve outcomes. △ Less

Submitted 29 March, 2024; v1 submitted 23 March, 2024; originally announced March 2024.

An Interactive Decision-Support Dashboard for Optimal Hospital Capacity Management

Authors: Felix Parker, Diego A. Martínez, James Scheulen, Kimia Ghobadi

Abstract: Data-driven optimization models have the potential to significantly improve hospital capacity management, particularly during demand surges, when effective allocation of capacity is most critical and challenging. However, integrating models into existing processes in a way that provides value requires recognizing that hospital administrators are ultimately responsible for making capacity managemen… ▽ More Data-driven optimization models have the potential to significantly improve hospital capacity management, particularly during demand surges, when effective allocation of capacity is most critical and challenging. However, integrating models into existing processes in a way that provides value requires recognizing that hospital administrators are ultimately responsible for making capacity management decisions, and carefully building trustworthy and accessible tools for them. In this study, we develop an interactive, user-friendly, electronic dashboard for informing hospital capacity management decisions during surge periods. The dashboard integrates real-time hospital data, predictive analytics, and optimization models. It allows hospital administrators to interactively customize parameters, enabling them to explore a range of scenarios, and provides real-time updates on recommended optimal decisions. The dashboard was created through a participatory design process, involving hospital administrators in the development team to ensure practical utility, trustworthiness, transparency, explainability, and usability. We successfully deployed our dashboard within the Johns Hopkins Health System during the height of the COVID-19 pandemic, addressing the increased need for tools to inform hospital capacity management. It was used on a daily basis, with results regularly communicated to hospital leadership. This study demonstrates the practical application of a prospective, data-driven, interactive decision-support tool for hospital system capacity management. △ Less

Submitted 27 March, 2024; v1 submitted 22 March, 2024; originally announced March 2024.

Dark Matter Line Searches with the Cherenkov Telescope Array

Authors: S. Abe, J. Abhir, A. Abhishek, F. Acero, A. Acharyya, R. Adam, A. Aguasca-Cabot, I. Agudo, A. Aguirre-Santaella, J. Alfaro, R. Alfaro, N. Alvarez-Crespo, R. Alves Batista, J. -P. Amans, E. Amato, G. Ambrosi, L. Angel, C. Aramo, C. Arcaro, T. T. H. Arnesen, L. Arrabito, K. Asano, Y. Ascasibar, J. Aschersleben, H. Ashkar , et al. (540 additional authors not shown)

Abstract: Monochromatic gamma-ray signals constitute a potential smoking gun signature for annihilating or decaying dark matter particles that could relatively easily be distinguished from astrophysical or instrumental backgrounds. We provide an updated assessment of the sensitivity of the Cherenkov Telescope Array (CTA) to such signals, based on observations of the Galactic centre region as well as of sele… ▽ More Monochromatic gamma-ray signals constitute a potential smoking gun signature for annihilating or decaying dark matter particles that could relatively easily be distinguished from astrophysical or instrumental backgrounds. We provide an updated assessment of the sensitivity of the Cherenkov Telescope Array (CTA) to such signals, based on observations of the Galactic centre region as well as of selected dwarf spheroidal galaxies. We find that current limits and detection prospects for dark matter masses above 300 GeV will be significantly improved, by up to an order of magnitude in the multi-TeV range. This demonstrates that CTA will set a new standard for gamma-ray astronomy also in this respect, as the world's largest and most sensitive high-energy gamma-ray observatory, in particular due to its exquisite energy resolution at TeV energies and the adopted observational strategy focussing on regions with large dark matter densities. Throughout our analysis, we use up-to-date instrument response functions, and we thoroughly model the effect of instrumental systematic uncertainties in our statistical treatment. We further present results for other potential signatures with sharp spectral features, e.g.~box-shaped spectra, that would likewise very clearly point to a particle dark matter origin. △ Less

Submitted 7 March, 2024; originally announced March 2024.

Comments: 43 pages JCAP style (excluding author list and references), 19 figures

Gravity effects on a bio-inspired self-burrowing probe in granular soils

Authors: Bowen Wang, Ningning Zhang, Yuyan Chen, Alejandro Martinez, Raul Fuentes

Abstract: In recent years, self-burrowing probes have been studied since they can be suitable for soil monitoring in locations with limited access such as outer space bodies and underneath existing structures. We study the performance of a self-burrowing probe under different gravity conditions, from low gravity (i.e., 1/6g, 1/3g and 1g) to high gravity (i.e., 5g, 10g and 15g), specifically in terms of pene… ▽ More In recent years, self-burrowing probes have been studied since they can be suitable for soil monitoring in locations with limited access such as outer space bodies and underneath existing structures. We study the performance of a self-burrowing probe under different gravity conditions, from low gravity (i.e., 1/6g, 1/3g and 1g) to high gravity (i.e., 5g, 10g and 15g), specifically in terms of penetration distance and energy consumption. Results show that the probe reaches efficient penetration in all gravity conditions and that it achieves larger penetration distances in high gravity conditions. However, the penetration efficiency, shown as unit energy per meter, is higher in low gravity. Additionally, we prove that a simple dimensional analysis provides reasonable scaling factors for first order effects in forces, velocities and energy. The findings in this study give confidence to the potential use of self-burrowing probes in campaigns of soil testing and sensor deployment in outer space or centrifuges in which the gravity conditions can differ from Earth. △ Less

Submitted 28 February, 2024; originally announced February 2024.

Estimation of complex carryover effects in crossover designs with repeated measures

Authors: N. A. Cruz, O. O. Melo, C. A. Martinez

Abstract: It has been argued that the models used to analyze data from crossover designs are not appropriate when simple carryover effects are assumed. In this paper, the estimability conditions of the carryover effects are found, and a theoretical result that supports them, additionally, two simulation examples are developed in a non-linear dose-response for a repeated measures crossover trial in two desig… ▽ More It has been argued that the models used to analyze data from crossover designs are not appropriate when simple carryover effects are assumed. In this paper, the estimability conditions of the carryover effects are found, and a theoretical result that supports them, additionally, two simulation examples are developed in a non-linear dose-response for a repeated measures crossover trial in two designs: the traditional AB/BA design and a Williams square. Both show that a semiparametric model can detect complex carryover effects and that this estimation improves the precision of treatment effect estimators. We concluded that when there are at least five replicates in each observation period per individual, semiparametric statistical models provide a good estimator of the treatment effect and reduce bias with respect to models that assume either, the absence of carryover or simplex carryover effects. In addition, an application of the methodology is shown and the richness in analysis that is gained by being able to estimate complex carryover effects is evident. △ Less

Submitted 26 February, 2024; originally announced February 2024.

Multi-Blade detector with VMM3a-ASIC-based readout: installation and commissioning at the reflectometer Amor at PSI

Authors: F. Piscitelli, F. Ghazi Moradi, F. S. Alves, M. J. Christensen, J. Hrivnak, A. Johansson, K. Fissum, C. C. Lai, A. Monera Martinez, D. Pfeiffer, E. Shahu, J. Stahn, P. O. Svensson

Abstract: The Multi-Blade (MB) Boron-10-based neutron detector is the chosen technology for three instruments at the European Spallation Source (ESS): the two ESS reflectometers, ESTIA and FREIA, and the Test Beam Line. A fourth MB detector has been built, installed and commissioned for the user operation of the reflectometer Amor at PSI (Switzerland). Amor can be considered a downscaled version of the ESS… ▽ More The Multi-Blade (MB) Boron-10-based neutron detector is the chosen technology for three instruments at the European Spallation Source (ESS): the two ESS reflectometers, ESTIA and FREIA, and the Test Beam Line. A fourth MB detector has been built, installed and commissioned for the user operation of the reflectometer Amor at PSI (Switzerland). Amor can be considered a downscaled version of the ESS reflectometer ESTIA. They are based on the same Selene guide concept, optimized for performing focusing reflectometry on small samples. The experience gained at Amor is invaluable for the future deployment of the MB detector at the ESS. This manuscript describes the MB detector construction and installation at Amor along with the readout electronics chain based on the VMM3a ASIC. The readout chain deployed at Amor is equivalent of that of the ESS, including the readout master module (RMM), event-formation-units (EFUs), Kafka, FileWriter and live visualisation tools. △ Less

Submitted 18 March, 2024; v1 submitted 13 February, 2024; originally announced February 2024.

Comments: 16 pages, 12 figures

Journal ref: 2024 JINST 19 P05010

Nonlinear electrodynamics for the vacuum of Dirac materials. Photon magnetic properties and radiation pressures

Authors: A. W. Romero Jorge, A. Pérez Martínez, E. Rodríguez Querts

Abstract: We investigate the magnetic properties of photons propagating through Dirac materials in a magnetic field, considering both vacuum and medium contributions. Photon propagation properties are obtained through a second-order expansion of non-linear Euler-Heisenberg electrodynamics at finite density and temperature considering Dirac material parameters (Dirac fine structure constant, band gap and Fer… ▽ More We investigate the magnetic properties of photons propagating through Dirac materials in a magnetic field, considering both vacuum and medium contributions. Photon propagation properties are obtained through a second-order expansion of non-linear Euler-Heisenberg electrodynamics at finite density and temperature considering Dirac material parameters (Dirac fine structure constant, band gap and Fermi velocity). Total magnetization (including electrons and photon contributions) and photon-effective magnetic moment are computed. Observables such as photon energy density, radiation pressure, and Poynting vector are obtained by an average of components of the energy-momentum tensor. All quantities are expressed in terms of Lagrangian derivatives. Those related to the vacuum are valid for any value of the external magnetic field, and both the weak and strong field limits are recovered. We discuss some ideas of experiments that may contribute to testing in Dirac materials the phenomenology of the strong magnetic field in the quantum electrodynamic vacuum and how non-linear corrections on the magnetization, radiation pressure, and birefringence, are amplified up to $10^3$ times QED corrections. △ Less

Submitted 3 June, 2024; v1 submitted 1 February, 2024; originally announced February 2024.

Comments: 35 pages, 8 figures

Magnetized Strange Stars and Signals of Gravitational Waves

Authors: S. López Pérez, D. Manreza Paret, A. Pérez Martínez

Abstract: We study the emission of gravitational waves from spheroidal magnetized strange stars for both an isolated slowly rotating star and a binary system. In the first case, we compute the quadrupole moment and the amplitude of gravitational waves that may be emitted. For the binary system, the tidal deformability is obtained by solving simultaneously the system of spheroidal structure equations and the… ▽ More We study the emission of gravitational waves from spheroidal magnetized strange stars for both an isolated slowly rotating star and a binary system. In the first case, we compute the quadrupole moment and the amplitude of gravitational waves that may be emitted. For the binary system, the tidal deformability is obtained by solving simultaneously the system of spheroidal structure equations and the Love number equation. These results are compared with the data inferred from the GW170817 event which is also used to calculate the mass and tidal deformability of the companion star in the binary system. Our model supports binary systems formed by magnetized strange stars describing reasonable signals of gravitational waves contrasted with other models of binary systems composed of magnetized hadronic stars and non-magnetized quark stars. △ Less

Submitted 31 January, 2024; v1 submitted 22 January, 2024; originally announced January 2024.

Robust variable selection for partially linear additive models

Authors: Graciela Boente, Alejandra Martínez

Abstract: Among semiparametric regression models, partially linear additive models provide a useful tool to include additive nonparametric components as well as a parametric component, when explaining the relationship between the response and a set of explanatory variables. This paper concerns such models under sparsity assumptions for the covariates included in the linear component. Sparse covariates are f… ▽ More Among semiparametric regression models, partially linear additive models provide a useful tool to include additive nonparametric components as well as a parametric component, when explaining the relationship between the response and a set of explanatory variables. This paper concerns such models under sparsity assumptions for the covariates included in the linear component. Sparse covariates are frequent in regression problems where the task of variable selection is usually of interest. As in other settings, outliers either in the residuals or in the covariates involved in the linear component have a harmful effect. To simultaneously achieve model selection for the parametric component of the model and resistance to outliers, we combine preliminary robust estimators of the additive component, robust linear $MM-$regression estimators with a penalty such as SCAD on the coefficients in the parametric part. Under mild assumptions, consistency results and rates of convergence for the proposed estimators are derived. A Monte Carlo study is carried out to compare, under different models and contamination schemes, the performance of the robust proposal with its classical counterpart. The obtained results show the advantage of using the robust approach. Through the analysis of a real data set, we also illustrate the benefits of the proposed procedure. △ Less

Submitted 31 January, 2024; v1 submitted 19 January, 2024; originally announced January 2024.

Influence of thermal effects on the optomechanical coupling rate in acousto-optic cavities

Authors: Raúl Ortiz, Laura Mercadé, Alberto Grau, Daniel Navarro-Urrios, Alejandro Martínez

Abstract: Optomechanical (OM) cavities simultaneously localize photons and phonons, thus enhancing their mutual interaction through radiation-pressure force. This acousto-optic interaction can be quantified by means of the optical frequency shift per mechanical displacement G. The aforesaid frequency shift can also be related to the vacuum OM coupling rate, g0, where only photoelastic (PE) and moving bounda… ▽ More Optomechanical (OM) cavities simultaneously localize photons and phonons, thus enhancing their mutual interaction through radiation-pressure force. This acousto-optic interaction can be quantified by means of the optical frequency shift per mechanical displacement G. The aforesaid frequency shift can also be related to the vacuum OM coupling rate, g0, where only photoelastic (PE) and moving boundaries (MB) effects are commonly taken into account. However, the thermo-optic (TO) and thermal expansion (ThE) effects may also play a role since the material forming the OM cavity could be heated by the presence of photons, which should naturally affect the mechanical properties of the cavity. In this work, we introduce a new theoretical approach to determine how thermal effects change the canonical OM coupling rate. To test the model, a complete set of optical-thermal-mechanical simulations has been performed in two OM crystal cavities fabricated from two different materials: silicon and diamond. Our results lead us to conclude that there is a non-negligible thermal correction that is always present as a negative shift to the OM coupling rate that should be considered in order to predict more accurately the strength of the OM interaction. △ Less

Submitted 9 January, 2024; originally announced January 2024.

FlopPITy: Enabling self-consistent exoplanet atmospheric retrievals with machine learning

Authors: Francisco Ardévol Martínez, Michiel Min, Daniela Huppenkothen, Inga Kamp, Paul I. Palmer

Abstract: Interpreting the observations of exoplanet atmospheres to constrain physical and chemical properties is typically done using Bayesian retrieval techniques. Because these methods require many model computations, a compromise is made between model complexity and run time. Reaching this compromise leads to the simplification of many physical and chemical processes (e.g. parameterised temperature stru… ▽ More Interpreting the observations of exoplanet atmospheres to constrain physical and chemical properties is typically done using Bayesian retrieval techniques. Because these methods require many model computations, a compromise is made between model complexity and run time. Reaching this compromise leads to the simplification of many physical and chemical processes (e.g. parameterised temperature structure). Here we implement and test sequential neural posterior estimation (SNPE), a machine learning inference algorithm, for exoplanet atmospheric retrievals. The goal is to speed up retrievals so they can be run with more computationally expensive atmospheric models, such as those computing the temperature structure using radiative transfer. We generate 100 synthetic observations using ARCiS (ARtful Modeling Code for exoplanet Science, an atmospheric modelling code with the flexibility to compute models in varying degrees of complexity) and perform retrievals on them to test the faithfulness of the SNPE posteriors. The faithfulness quantifies whether the posteriors contain the ground truth as often as we expect. We also generate a synthetic observation of a cool brown dwarf using the self-consistent capabilities of ARCiS and run a retrieval with self-consistent models to showcase the possibilities that SNPE opens. We find that SNPE provides faithful posteriors and is therefore a reliable tool for exoplanet atmospheric retrievals. We are able to run a self-consistent retrieval of a synthetic brown dwarf spectrum using only 50,000 forward model evaluations. We find that SNPE can speed up retrievals between $\sim2\times$ and $\geq10\times$ depending on the computational load of the forward model, the dimensionality of the observation, and the signal-to-noise ratio of the observation. We make the code publicly available for the community on Github. △ Less

Submitted 8 January, 2024; originally announced January 2024.

Comments: Accepted for publication at A&A

VideoPoet: A Large Language Model for Zero-Shot Video Generation

Authors: Dan Kondratyuk, Lijun Yu, Xiuye Gu, José Lezama, Jonathan Huang, Grant Schindler, Rachel Hornung, Vighnesh Birodkar, Jimmy Yan, Ming-Chang Chiu, Krishna Somandepalli, Hassan Akbari, Yair Alon, Yong Cheng, Josh Dillon, Agrim Gupta, Meera Hahn, Anja Hauth, David Hendon, Alonso Martinez, David Minnen, Mikhail Sirotenko, Kihyuk Sohn, Xuan Yang, Hartwig Adam , et al. (6 additional authors not shown)

Abstract: We present VideoPoet, a language model capable of synthesizing high-quality video, with matching audio, from a large variety of conditioning signals. VideoPoet employs a decoder-only transformer architecture that processes multimodal inputs -- including images, videos, text, and audio. The training protocol follows that of Large Language Models (LLMs), consisting of two stages: pretraining and tas… ▽ More We present VideoPoet, a language model capable of synthesizing high-quality video, with matching audio, from a large variety of conditioning signals. VideoPoet employs a decoder-only transformer architecture that processes multimodal inputs -- including images, videos, text, and audio. The training protocol follows that of Large Language Models (LLMs), consisting of two stages: pretraining and task-specific adaptation. During pretraining, VideoPoet incorporates a mixture of multimodal generative objectives within an autoregressive Transformer framework. The pretrained LLM serves as a foundation that can be adapted for a range of video generation tasks. We present empirical results demonstrating the model's state-of-the-art capabilities in zero-shot video generation, specifically highlighting VideoPoet's ability to generate high-fidelity motions. Project page: http://sites.research.google/videopoet/ △ Less

Submitted 4 June, 2024; v1 submitted 21 December, 2023; originally announced December 2023.

Comments: To appear at ICML 2024; Project page: http://sites.research.google/videopoet/

Long time behaviour of the solution of Maxwell's equations in dissipative generalized Lorentz materials (II) A modal approach

Authors: Maxence Cassier, Patrick Joly, Luis Alejandro Rosas Martínez

Abstract: This work concerns the analysis of electromagnetic dispersive media modelled by generalized Lorentz models. More precisely, this paper is the second of two articles dedicated to the long time behaviour of solutions of Maxwell's equations in dissipative Lorentz media, via the long time decay rate of the electromagnetic energy for the corresponding Cauchy problem. In opposition to the frequency depe… ▽ More This work concerns the analysis of electromagnetic dispersive media modelled by generalized Lorentz models. More precisely, this paper is the second of two articles dedicated to the long time behaviour of solutions of Maxwell's equations in dissipative Lorentz media, via the long time decay rate of the electromagnetic energy for the corresponding Cauchy problem. In opposition to the frequency dependent Lyapunov functions approach used in [Cassier, Joly, Rosas Martínez, Z. Angew. Math. Phys. 74 (2023), 115], we develop a method based on the spectral analysis of the underlying non-self-adjoint operator of the model. Although more involved, this approach is closer to physics, as it uses the dispersion relation of the model, and has the advantage to provide more precise and more optimal results, leading to distinguish the notion of weak and strong dissipation. △ Less

Submitted 19 December, 2023; originally announced December 2023.

Comments: 67 pages, 4 figures

MSC Class: 35Q60; 78A25; 35P99; 37L15

The small kt-region in Drell-Yan production at next-to-leading order with the Parton Branching Method

Authors: I. Bubanja, A. Bermudez Martinez, L. Favart, F. Guzman, F. Hautmann, H. Jung, A. Lelek, M. Mendizabal, K. Moral Figueroa, L. Moureaux, N. Raicevic, M. Seidel, S. Taheri Monfared

Abstract: The Parton Branching (PB) method describes the evolution of transverse momentum dependent (TMD) parton distributions, covering all kinematic regions from small to large transverse momenta kT. The small kT-region is very sensitive both to the contribution of the intrinsic motion of partons (intrinsic kT) and to the resummation of soft gluons taken into account by the PB TMD evolution equations. We… ▽ More The Parton Branching (PB) method describes the evolution of transverse momentum dependent (TMD) parton distributions, covering all kinematic regions from small to large transverse momenta kT. The small kT-region is very sensitive both to the contribution of the intrinsic motion of partons (intrinsic kT) and to the resummation of soft gluons taken into account by the PB TMD evolution equations. We study the role of soft-gluon emissions in TMD as well as integrated parton distributions. We perform a detailed investigation of the PB TMD methodology at next-to-leading order (NLO) in Drell-Yan (DY) production for low transverse momenta. We present the extraction of the nonperturbative "intrinsic-kT" distribution from recent measurements of DY transverse momentum distributions at the LHC across a wide range in DY masses, including a detailed treatment of statistical, correlated and uncorrelated uncertainties. We comment on the (in)dependence of intrinsic transverse momentum on DY mass and center-of-mass energy, and on the comparison with other approaches. △ Less

Submitted 26 February, 2024; v1 submitted 13 December, 2023; originally announced December 2023.

Comments: Replaced with journal version, minor edits

Report number: DESY-23-209

Journal ref: Eur.Phys.J.C 84 (2024) 2, 154

Observation of ultra-high-Q resonators in the ultrasound via bound states in the continuum

Authors: Mohamed Farhat, Younes Achaoui, Julio A. Iglesias Martinez, Mahmoud Addouche, Ying Wu, Abdelkrim Khelif

Abstract: The confinement of waves in open systems represents a fundamental phenomenon extensively explored across various branches of wave physics. Recently, significant attention has been directed towards bound states in the continuum (BIC), a class of modes that are trapped but do not decay in an otherwise unbounded continuum. Here, we theoretically investigate and experimentally demonstrate the existenc… ▽ More The confinement of waves in open systems represents a fundamental phenomenon extensively explored across various branches of wave physics. Recently, significant attention has been directed towards bound states in the continuum (BIC), a class of modes that are trapped but do not decay in an otherwise unbounded continuum. Here, we theoretically investigate and experimentally demonstrate the existence of quasi-BIC (QBIC) for ultrasonic waves by leveraging an elastic Fabry-Pérot metasurface resonator. We unveil several intriguing properties of the ultrasound QBIC that are robust to parameter scanning, and we present experimental evidence of a remarkable Q-factor of 350 at around 1 MHz frequency, far exceeding the state-of-the-art using a fully acoustic underwater system. Our findings contribute novel insights into the understanding of BIC for acoustic waves, offering a new paradigm for the design of efficient, ultra-high Q-factor ultrasound devices. △ Less

Submitted 13 February, 2024; v1 submitted 9 December, 2023; originally announced December 2023.

Comments: 9 pages, 5 figures

Thermodynamic Computing System for AI Applications

Authors: Denis Melanson, Mohammad Abu Khater, Maxwell Aifer, Kaelan Donatella, Max Hunter Gordon, Thomas Ahle, Gavin Crooks, Antonio J. Martinez, Faris Sbahi, Patrick J. Coles

Abstract: Recent breakthroughs in artificial intelligence (AI) algorithms have highlighted the need for novel computing hardware in order to truly unlock the potential for AI. Physics-based hardware, such as thermodynamic computing, has the potential to provide a fast, low-power means to accelerate AI primitives, especially generative AI and probabilistic AI. In this work, we present the first continuous-va… ▽ More Recent breakthroughs in artificial intelligence (AI) algorithms have highlighted the need for novel computing hardware in order to truly unlock the potential for AI. Physics-based hardware, such as thermodynamic computing, has the potential to provide a fast, low-power means to accelerate AI primitives, especially generative AI and probabilistic AI. In this work, we present the first continuous-variable thermodynamic computer, which we call the stochastic processing unit (SPU). Our SPU is composed of RLC circuits, as unit cells, on a printed circuit board, with 8 unit cells that are all-to-all coupled via switched capacitances. It can be used for either sampling or linear algebra primitives, and we demonstrate Gaussian sampling and matrix inversion on our hardware. The latter represents the first thermodynamic linear algebra experiment. We also illustrate the applicability of the SPU to uncertainty quantification for neural network classification. We envision that this hardware, when scaled up in size, will have significant impact on accelerating various probabilistic AI applications. △ Less

Submitted 8 December, 2023; originally announced December 2023.

Comments: 26 pages, 22 figures

The JWST Early Release Science Program for Direct Observations of Exoplanetary Systems V: Do Self-Consistent Atmospheric Models Represent JWST Spectra? A Showcase With VHS 1256 b

Authors: Simon Petrus, Niall Whiteford, Polychronis Patapis, Beth A. Biller, Andrew Skemer, Sasha Hinkley, Genaro Suárez, Anna Lueber, Paulina Palma-Bifani, Jordan M. Stone, Johanna M. Vos, Caroline V. Morley, Pascal Tremblin, Benjamin Charnay, Christiane Helling, Brittany E. Miles, Aarynn L. Carter, Jason J. Wang, Markus Janson, Eileen C. Gonzales, Ben Sutlieff, Kielan K. W. Hoch, Mickaël Bonnefoy, Gaël Chauvin, Olivier Absil , et al. (97 additional authors not shown)

Abstract: The unprecedented medium-resolution (R~1500-3500) near- and mid-infrared (1-18um) spectrum provided by JWST for the young (140+/-20Myr) low-mass (12-20MJup) L-T transition (L7) companion VHS1256b gives access to a catalogue of molecular absorptions. In this study, we present a comprehensive analysis of this dataset utilizing a forward modelling approach, applying our Bayesian framework, ForMoSA. W… ▽ More The unprecedented medium-resolution (R~1500-3500) near- and mid-infrared (1-18um) spectrum provided by JWST for the young (140+/-20Myr) low-mass (12-20MJup) L-T transition (L7) companion VHS1256b gives access to a catalogue of molecular absorptions. In this study, we present a comprehensive analysis of this dataset utilizing a forward modelling approach, applying our Bayesian framework, ForMoSA. We explore five distinct atmospheric models to assess their performance in estimating key atmospheric parameters: Teff, log(g), [M/H], C/O, gamma, fsed, and R. Our findings reveal that each parameter's estimate is significantly influenced by factors such as the wavelength range considered and the model chosen for the fit. This is attributed to systematic errors in the models and their challenges in accurately replicating the complex atmospheric structure of VHS1256b, notably the complexity of its clouds and dust distribution. To propagate the impact of these systematic uncertainties on our atmospheric property estimates, we introduce innovative fitting methodologies based on independent fits performed on different spectral windows. We finally derived a Teff consistent with the spectral type of the target, considering its young age, which is confirmed by our estimate of log(g). Despite the exceptional data quality, attaining robust estimates for chemical abundances [M/H] and C/O, often employed as indicators of formation history, remains challenging. Nevertheless, the pioneering case of JWST's data for VHS1256b has paved the way for future acquisitions of substellar spectra that will be systematically analyzed to directly compare the properties of these objects and correct the systematics in the models. △ Less

Submitted 31 January, 2024; v1 submitted 6 December, 2023; originally announced December 2023.

Comments: 32 pages, 16 figures, 6 tables, 2 appendices

SO$_2$, silicate clouds, but no CH$_4$ detected in a warm Neptune

Authors: Achrène Dyrek, Michiel Min, Leen Decin, Jeroen Bouwman, Nicolas Crouzet, Paul Mollière, Pierre-Olivier Lagage, Thomas Konings, Pascal Tremblin, Manuel Güdel, John Pye, Rens Waters, Thomas Henning, Bart Vandenbussche, Francisco Ardevol Martinez, Ioannis Argyriou, Elsa Ducrot, Linus Heinke, Gwenael Van Looveren, Olivier Absil, David Barrado, Pierre Baudoz, Anthony Boccaletti, Christophe Cossou, Alain Coulais , et al. (22 additional authors not shown)

Abstract: WASP-107b is a warm ($\sim$740 K) transiting planet with a Neptune-like mass of $\sim$30.5 $M_{\oplus}$ and Jupiter-like radius of $\sim$0.94 $R_{\rm J}$, whose extended atmosphere is eroding. Previous observations showed evidence for water vapour and a thick high-altitude condensate layer in WASP-107b's atmosphere. Recently, photochemically produced sulphur dioxide (SO$_2$) was detected in the at… ▽ More WASP-107b is a warm ($\sim$740 K) transiting planet with a Neptune-like mass of $\sim$30.5 $M_{\oplus}$ and Jupiter-like radius of $\sim$0.94 $R_{\rm J}$, whose extended atmosphere is eroding. Previous observations showed evidence for water vapour and a thick high-altitude condensate layer in WASP-107b's atmosphere. Recently, photochemically produced sulphur dioxide (SO$_2$) was detected in the atmosphere of a hot ($\sim$1,200 K) Saturn-mass planet from transmission spectroscopy near 4.05 $μ$m, but for temperatures below $\sim$1,000 K sulphur is predicted to preferably form sulphur allotropes instead of SO$_2$. Here we report the 9$σ$-detection of two fundamental vibration bands of SO$_2$, at 7.35 $μ$m and 8.69 $μ$m, in the transmission spectrum of WASP-107b using the Mid-Infrared Instrument (MIRI) of the JWST. This discovery establishes WASP-107b as the second irradiated exoplanet with confirmed photochemistry, extending the temperature range of exoplanets exhibiting detected photochemistry from $\sim$1,200 K down to $\sim$740 K. Additionally, our spectral analysis reveals the presence of silicate clouds, which are strongly favoured ($\sim$7$σ$) over simpler cloud setups. Furthermore, water is detected ($\sim$12$σ$), but methane is not. These findings provide evidence of disequilibrium chemistry and indicate a dynamically active atmosphere with a super-solar metallicity. △ Less

Submitted 21 November, 2023; originally announced November 2023.

15NH3 in the atmosphere of a cool brown dwarf

Authors: David Barrado, Paul Mollière, Polychronis Patapis, Michiel Min, Pascal Tremblin, Francisco Ardevol Martinez, Niall Whiteford, Malavika Vasist, Ioannis Argyriou, Matthias Samland, Pierre-Olivier Lagage, Leen Decin, Rens Waters, Thomas Henning, María Morales-Calderón, Manuel Guedel, Bart Vandenbussche, Olivier Absil, Pierre Baudoz, Anthony Boccaletti, Jeroen Bouwman, Christophe Cossou, Alain Coulais, Nicolas Crouzet, René Gastaud , et al. (18 additional authors not shown)

Abstract: Brown dwarfs serve as ideal laboratories for studying the atmospheres of giant exoplanets on wide orbits as the governing physical and chemical processes in them are nearly identical. Understanding the formation of gas giant planets is challenging, often involving the endeavour to link atmospheric abundance ratios, such as the carbon-to-oxygen (C/O) ratio, to formation scenarios. However, the comp… ▽ More Brown dwarfs serve as ideal laboratories for studying the atmospheres of giant exoplanets on wide orbits as the governing physical and chemical processes in them are nearly identical. Understanding the formation of gas giant planets is challenging, often involving the endeavour to link atmospheric abundance ratios, such as the carbon-to-oxygen (C/O) ratio, to formation scenarios. However, the complexity of planet formation requires additional tracers, as the unambiguous interpretation of the measured C/O ratio is fraught with complexity. Isotope ratios, such as deuterium-to-hydrogen and 14N/15N, offer a promising avenue to gain further insight into this formation process, mirroring their utility within the solar system. For exoplanets only a handful of constraints on 12C/13C exist, pointing to the accretion of 13C-rich ice from beyond the disks' CO iceline. Here we report on the mid-infrared detection of the 14NH3 and 15NH3 isotopologues in the atmosphere of a cool brown dwarf with an effective temperature of 380 K in a spectrum taken with the Mid-InfraRed Instrument of the James Webb Space Telescope. As expected, our results reveal a 14N/15N value consistent with star-like formation by gravitational collapse, demonstrating that this ratio can be accurately constrained. Since young stars and their planets should be more strongly enriched in the 15N isotope, we expect that 15NH3 will be detectable in a number of cold, wide-separation exoplanets. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Comments: Accepted by Nature. 28 pages, 7 figures, uses nature3.cls

Radiative Corrections to the Muon Polarization in the Semileptonic Decay of a Neutral Kaon

Authors: J. Vieyra, A. Martínez, M. Neri, A. Hernández-Galeana

Abstract: A model-independent expression for the Dalitz plot of the semileptonic decays of a neutral kaon $K_{μ3}^0$, including radiative corrections to order $\mathcal{O}[(α/ π)(q/M_1)]$, where $q$ is the four-momentum transfer and $M_1$ is the mass of the decaying kaon, is presented. In this paper the emitted muon is considered to be polarized so the analysis is centered on numerically evaluating the radi… ▽ More A model-independent expression for the Dalitz plot of the semileptonic decays of a neutral kaon $K_{μ3}^0$, including radiative corrections to order $\mathcal{O}[(α/ π)(q/M_1)]$, where $q$ is the four-momentum transfer and $M_1$ is the mass of the decaying kaon, is presented. In this paper the emitted muon is considered to be polarized so the analysis is centered on numerically evaluating the radiative corrections to the longitudinal, transverse, and normal polarization muon components. The model dependence of radiative corrections is kept in general form within this approximation, which is useful for model-independent experimental analyses. The final expressions, with the triple integration of the bremsstrahlung photon variables are ready to be performed numerically. The radiative corrections to the components of the muon polarization are found to be very small compared to their respective uncorrected values. △ Less

Submitted 8 November, 2023; originally announced November 2023.

Comments: arXiv admin note: substantial text overlap with arXiv:2004.05402

Automatic Configuration of Multi-Agent Model Predictive Controllers based on Semantic Graph World Models

Authors: K. de Vos, E. Torta, H. Bruyninckx, C. A. Lopez Martinez, M. J. G. van de Molengraft

Abstract: We propose a shared semantic map architecture to construct and configure Model Predictive Controllers (MPC) dynamically, that solve navigation problems for multiple robotic agents sharing parts of the same environment. The navigation task is represented as a sequence of semantically labeled areas in the map, that must be traversed sequentially, i.e. a route. Each semantic label represents one or m… ▽ More We propose a shared semantic map architecture to construct and configure Model Predictive Controllers (MPC) dynamically, that solve navigation problems for multiple robotic agents sharing parts of the same environment. The navigation task is represented as a sequence of semantically labeled areas in the map, that must be traversed sequentially, i.e. a route. Each semantic label represents one or more constraints on the robots' motion behaviour in that area. The advantages of this approach are: (i) an MPC-based motion controller in each individual robot can be (re-)configured, at runtime, with the locally and temporally relevant parameters; (ii) the application can influence, also at runtime, the navigation behaviour of the robots, just by adapting the semantic labels; and (iii) the robots can reason about their need for coordination, through analyzing over which horizon in time and space their routes overlap. The paper provides simulations of various representative situations, showing that the approach of runtime configuration of the MPC drastically decreases computation time, while retaining task execution performance similar to an approach in which each robot always includes all other robots in its MPC computations. △ Less

Submitted 2 November, 2023; originally announced November 2023.

Chiral forces in longitudinally invariant dielectric photonic waveguides

Authors: Josep Martínez-Romeu, Iago Díez, Sebastian Golat, Francisco J. Rodríguez-Fortuño, Alejandro Martínez

Abstract: Optical forces can be chiral when they exhibit opposite signs for the two enantiomeric versions of a chiral molecule or particle. Such forces could be eventually used to separate enantiomers, which could find application in numerous disciplines. Here, we analyze numerically the optical chiral forces arising in the basic element of photonic integrated circuitry: a dielectric waveguide with rectangu… ▽ More Optical forces can be chiral when they exhibit opposite signs for the two enantiomeric versions of a chiral molecule or particle. Such forces could be eventually used to separate enantiomers, which could find application in numerous disciplines. Here, we analyze numerically the optical chiral forces arising in the basic element of photonic integrated circuitry: a dielectric waveguide with rectangular cross-section. Such waveguides are inherently lossless thus generating chiral forces that are invariant in the longitudinal direction and therefore enable enantiomeric separation over long (cm-scale) distances. Assuming Brownian motion in a liquid environment, we calculate first the force strength and time span needed to perform the separation of chiral nanoparticles as a function of the radii. Then we analyze the chiral forces produced by the fundamental quasi-TE guided mode in a silicon nitride waveguide and show that it can lead to enantiomeric separation via the transverse spin at short wavelengths (405 nm). At longer wavelengths (1310 nm), the proper combination of degenerate quasi-TE and quasi-TM modes would result in a quasi-circularly polarized mode with intrinsic chirality (helicity), leading to chiral gradient forces that also enable the enantiomeric separation of smaller nanoparticles. We report particle tracking simulations where the optical force field produced by a quasi-TE and a quasi-circular mode proved to separate enantiomers under a time span of two seconds. Our results suggest the viability of enantiomeric separation using simple photonic integrated circuits, though different wavelength windows should be selected according to the nanoparticle size. △ Less

Submitted 25 October, 2023; originally announced October 2023.

Comments: 19 pages, 6 figures

Early Career Perspectives For the NASA SMD Bridge Program

Authors: Jenna M. Cann, Arturo O. Martinez, Amethyst Barnes, Sara Doan, Feyi Ilesanmi, Margaret Lazzarini, Teresa Monsue, Carlos Pinedo, Nicole Cabrera Salazar, Amy Steele

Abstract: In line with the Astro2020 Decadal Report State of the Profession findings and the NASA core value of Inclusion, the NASA Science Mission Directorate (SMD) Bridge Program was created to provide financial and programmatic support to efforts that work to increase the representation and inclusion of students from under-represented minorities in the STEM fields. To ensure an effective program, particu… ▽ More In line with the Astro2020 Decadal Report State of the Profession findings and the NASA core value of Inclusion, the NASA Science Mission Directorate (SMD) Bridge Program was created to provide financial and programmatic support to efforts that work to increase the representation and inclusion of students from under-represented minorities in the STEM fields. To ensure an effective program, particularly for those who are often left out of these conversations, the NASA SMD Bridge Program Workshop was developed as a way to gather feedback from a diverse group of people about their unique needs and interests. The Early Career Perspectives Working Group was tasked with examining the current state of bridge programs, academia in general, and its effect on students and early career professionals. The working group, comprised of 10 early career and student members, analyzed the discussions and responses from workshop breakout sessions and two surveys, as well as their own experiences, to develop specific recommendations and metrics for implementing a successful and supportive bridge program. In this white paper, we will discuss the key themes that arose through our work, and highlight select recommendations for the NASA SMD Bridge Program to best support students and early career professionals. △ Less

Submitted 23 October, 2023; originally announced October 2023.

Comments: White paper developed by the Early Career Perspectives Working Group for the NASA SMD Bridge Program Workshop. 11 pages

Simulating medium-spectral-resolution exoplanet characterization with SCALES angular/reference differential imaging

Authors: Aditi Desai, Stephanie E. Sallum, Ravinder Banyal, Natalie Batalha, Natasha Batalha, Geoff Blake, Tim Brandt, Zack Briesemeister, Katherine de Kleer, Imke de Pater, Josh Eisner, Wen-fai Fong, Tom Greene, Mitsuhiko Honda, Isabel Kain, Charlie Kilpatrick, Mackenzie Lach, Mike Liu, Bruce Macintosh, Raquel A. Martinez, Dimitri Mawet, Brittany Miles, Caroline Morley, Diana Powell, Patrick Sheehan , et al. (8 additional authors not shown)

Abstract: SCALES (Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy) is a 2 - 5 micron high-contrast lenslet-based integral field spectrograph (IFS) designed to characterize exoplanets and their atmospheres. The SCALES medium-spectral-resolution mode uses a lenslet subarray with a 0.34 x 0.36 arcsecond field of view which allows for exoplanet characterization at increased spectral resolution… ▽ More SCALES (Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy) is a 2 - 5 micron high-contrast lenslet-based integral field spectrograph (IFS) designed to characterize exoplanets and their atmospheres. The SCALES medium-spectral-resolution mode uses a lenslet subarray with a 0.34 x 0.36 arcsecond field of view which allows for exoplanet characterization at increased spectral resolution. We explore the sensitivity limitations of this mode by simulating planet detections in the presence of realistic noise sources. We use the SCALES simulator scalessim to generate high-fidelity mock observations of planets that include speckle noise from their host stars, as well as other atmospheric and instrumental noise effects. We employ both angular and reference differential imaging as methods of disentangling speckle noise from the injected planet signals. These simulations allow us to assess the feasibility of speckle deconvolution for SCALES medium resolution data, and to test whether one approach outperforms another based on planet angular separations and contrasts. △ Less

Submitted 18 October, 2023; originally announced October 2023.

The \textit{JWST} Early Release Science Program for Direct Observations of Exoplanetary Systems III: Aperture Masking Interferometric Observations of the star HIP\,65426 at $\boldsymbol{3.8\,\rm{μm}}$

Authors: Shrishmoy Ray, Steph Sallum, Sasha Hinkley, Anand Sivamarakrishnan, Rachel Cooper, Jens Kammerer, Alexandra Z. Greebaum, Deepashri Thatte, Cecilia Lazzoni, Andrei Tokovinin, Matthew de Furio, Samuel Factor, Michael Meyer, Jordan M. Stone, Aarynn Carter, Beth Biller, Andrew Skemer, Genaro Suarez, Jarron M. Leisenring, Marshall D. Perrin, Adam L. Kraus, Olivier Absil, William O. Balmer, Mickael Bonnefoy, Marta L. Bryan , et al. (98 additional authors not shown)

Abstract: We present aperture masking interferometry (AMI) observations of the star HIP 65426 at $3.8\,\rm{μm}$ as a part of the \textit{JWST} Direct Imaging Early Release Science (ERS) program obtained using the Near Infrared Imager and Slitless Spectrograph (NIRISS) instrument. This mode provides access to very small inner working angles (even separations slightly below the Michelson limit of ${}0.5λ/D$ f… ▽ More We present aperture masking interferometry (AMI) observations of the star HIP 65426 at $3.8\,\rm{μm}$ as a part of the \textit{JWST} Direct Imaging Early Release Science (ERS) program obtained using the Near Infrared Imager and Slitless Spectrograph (NIRISS) instrument. This mode provides access to very small inner working angles (even separations slightly below the Michelson limit of ${}0.5λ/D$ for an interferometer), which are inaccessible with the classical inner working angles of the \textit{JWST} coronagraphs. When combined with \textit{JWST}'s unprecedented infrared sensitivity, this mode has the potential to probe a new portion of parameter space across a wide array of astronomical observations. Using this mode, we are able to achieve a contrast of $Δm_{F380M}{\sim }7.8$\,mag relative to the host star at a separation of ${\sim}0.07\arcsec$ but detect no additional companions interior to the known companion HIP\,65426\,b. Our observations thus rule out companions more massive than $10{-}12\,\rm{M\textsubscript{Jup}}$ at separations ${\sim}10{-}20\,\rm{au}$ from HIP\,65426, a region out of reach of ground or space-based coronagraphic imaging. These observations confirm that the AMI mode on \textit{JWST} is sensitive to planetary mass companions orbiting at the water frost line, even for more distant stars at $\sim$100\,pc. This result will allow the planning and successful execution of future observations to probe the inner regions of nearby stellar systems, opening essentially unexplored parameter space. △ Less

Submitted 17 October, 2023; originally announced October 2023.

Comments: 15 pages, 9 figures, submitted to ApJ Letters

The JWST Early Release Science Program for Direct Observations of Exoplanetary Systems IV: NIRISS Aperture Masking Interferometry Performance and Lessons Learned

Authors: Steph Sallum, Shrishmoy Ray, Jens Kammerer, Anand Sivaramakrishnan, Rachel Cooper, Alexandra Z. Greebaum, Deepashri Thatte, Matthew de Furio, Samuel Factor, Michael Meyer, Jordan M. Stone, Aarynn Carter, Beth Biller, Sasha Hinkley, Andrew Skemer, Genaro Suarez, Jarron M. Leisenring, Marshall D. Perrin, Adam L. Kraus, Olivier Absil, William O. Balmer, Mickael Bonnefoy, Marta L. Bryan, Sarah K. Betti, Anthony Boccaletti , et al. (98 additional authors not shown)

Abstract: We present a performance analysis for the aperture masking interferometry (AMI) mode on board the James Webb Space Telescope Near Infrared Imager and Slitless Spectrograph (JWST/NIRISS). Thanks to self-calibrating observables, AMI accesses inner working angles down to and even within the classical diffraction limit. The scientific potential of this mode has recently been demonstrated by the Early… ▽ More We present a performance analysis for the aperture masking interferometry (AMI) mode on board the James Webb Space Telescope Near Infrared Imager and Slitless Spectrograph (JWST/NIRISS). Thanks to self-calibrating observables, AMI accesses inner working angles down to and even within the classical diffraction limit. The scientific potential of this mode has recently been demonstrated by the Early Release Science (ERS) 1386 program with a deep search for close-in companions in the HIP 65426 exoplanetary system. As part of ERS 1386, we use the same data set to explore the random, static, and calibration errors of NIRISS AMI observables. We compare the observed noise properties and achievable contrast to theoretical predictions. We explore possible sources of calibration errors and show that differences in charge migration between the observations of HIP 65426 and point-spread function calibration stars can account for the achieved contrast curves. Lastly, we use self-calibration tests to demonstrate that with adequate calibration NIRISS F380M AMI can reach contrast levels of $\sim9-10$ mag at $\gtrsim λ/D$. These tests lead us to observation planning recommendations and strongly motivate future studies aimed at producing sophisticated calibration strategies taking these systematic effects into account. This will unlock the unprecedented capabilities of JWST/NIRISS AMI, with sensitivity to significantly colder, lower-mass exoplanets than lower-contrast ground-based AMI setups, at orbital separations inaccessible to JWST coronagraphy. △ Less

Submitted 11 March, 2024; v1 submitted 17 October, 2023; originally announced October 2023.

Comments: 20 pages, 12 figures, accepted to Astrophysical Journal Letters

Optical chiral sorting forces and their manifestation in evanescent waves and nanofibres

Authors: Sebastian Golat, Jack J. Kingsley-Smith, Iago Diez, Josep Martinez-Romeu, Alejandro Martínez, Francisco J. Rodríguez-Fortuño

Abstract: Optical fields can exert forces of chiral nature on molecules and nanoparticles, which would prove extremely valuable in the separation of enantiomers with pharmaceutical applications, yet it is inherently complex, and the varied frameworks used in the literature further complicate the theoretical understanding. This paper unifies existing approaches used to describe dipolar optical forces and int… ▽ More Optical fields can exert forces of chiral nature on molecules and nanoparticles, which would prove extremely valuable in the separation of enantiomers with pharmaceutical applications, yet it is inherently complex, and the varied frameworks used in the literature further complicate the theoretical understanding. This paper unifies existing approaches used to describe dipolar optical forces and introduces a new symmetry-based `force basis' consisting of twelve vector fields, each weighted by particle-specific coefficients, for a streamlined description of force patterns. The approach is rigorously applied to evanescent waves and dielectric nanofibres, yielding concise analytical expressions for optical forces. Through this, we identify optimal strategies for enantiomer separation, offering invaluable guidance for future experiments. △ Less

Submitted 17 October, 2023; originally announced October 2023.

Comments: 18 pages, 5 figures

Journal ref: Phys. Rev. Research 6, 023079 (2024)

Chasing Gravitational Waves with the Cherenkov Telescope Array

Authors: Jarred Gershon Green, Alessandro Carosi, Lara Nava, Barbara Patricelli, Fabian Schüssler, Monica Seglar-Arroyo, Cta Consortium, :, Kazuki Abe, Shotaro Abe, Atreya Acharyya, Remi Adam, Arnau Aguasca-Cabot, Ivan Agudo, Jorge Alfaro, Nuria Alvarez-Crespo, Rafael Alves Batista, Jean-Philippe Amans, Elena Amato, Filippo Ambrosino, Ekrem Oguzhan Angüner, Lucio Angelo Antonelli, Carla Aramo, Cornelia Arcaro, Luisa Arrabito , et al. (545 additional authors not shown)

Abstract: The detection of gravitational waves from a binary neutron star merger by Advanced LIGO and Advanced Virgo (GW170817), along with the discovery of the electromagnetic counterparts of this gravitational wave event, ushered in a new era of multimessenger astronomy, providing the first direct evidence that BNS mergers are progenitors of short gamma-ray bursts (GRBs). Such events may also produce very… ▽ More The detection of gravitational waves from a binary neutron star merger by Advanced LIGO and Advanced Virgo (GW170817), along with the discovery of the electromagnetic counterparts of this gravitational wave event, ushered in a new era of multimessenger astronomy, providing the first direct evidence that BNS mergers are progenitors of short gamma-ray bursts (GRBs). Such events may also produce very-high-energy (VHE, > 100GeV) photons which have yet to be detected in coincidence with a gravitational wave signal. The Cherenkov Telescope Array (CTA) is a next-generation VHE observatory which aims to be indispensable in this search, with an unparalleled sensitivity and ability to slew anywhere on the sky within a few tens of seconds. New observing modes and follow-up strategies are being developed for CTA to rapidly cover localization areas of gravitational wave events that are typically larger than the CTA field of view. This work will evaluate and provide estimations on the expected number of of gravitational wave events that will be observable with CTA, considering both on- and off-axis emission. In addition, we will present and discuss the prospects of potential follow-up strategies with CTA. △ Less

Submitted 5 February, 2024; v1 submitted 11 October, 2023; originally announced October 2023.

Comments: Presented at the 38th International Cosmic Ray Conference (ICRC 2023), 2023 (arXiv:2309.08219)

Report number: CTA-ICRC/2023/30

The Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy (SCALES): driving science cases and expected outcomes

Authors: Steph Sallum, Andrew Skemer, Deno Stelter, Ravinder Banyal, Natalie Batalha, Natasha Batalha, Geoff Blake, Tim Brandt, Zack Briesemeister, Katherine de Kleer, Imke de Pater, Aditi Desai, Josh Eisner, Wen-fai Fong, Tom Greene, Mitsuhiko Honda, Rebecca Jensen-Clem, Isabel Kain, Charlie Kilpatrick, Renate Kupke, Mackenzie Lach, Michael C. Liu, Bruce Macintosh, Raquel A. Martinez, Dimitri Mawet , et al. (12 additional authors not shown)

Abstract: The Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy (SCALES) is a $2-5~μ$m, high-contrast integral field spectrograph (IFS) currently being built for Keck Observatory. With both low ($R\lesssim250$) and medium ($R\sim3500-7000$) spectral resolution IFS modes, SCALES will detect and characterize significantly colder exoplanets than those accessible with near-infrared ($\sim1-2~μ$m… ▽ More The Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy (SCALES) is a $2-5~μ$m, high-contrast integral field spectrograph (IFS) currently being built for Keck Observatory. With both low ($R\lesssim250$) and medium ($R\sim3500-7000$) spectral resolution IFS modes, SCALES will detect and characterize significantly colder exoplanets than those accessible with near-infrared ($\sim1-2~μ$m) high-contrast spectrographs. This will lead to new progress in exoplanet atmospheric studies, including detailed characterization of benchmark systems that will advance the state of the art of atmospheric modeling. SCALES' unique modes, while designed specifically for direct exoplanet characterization, will enable a broader range of novel (exo)planetary observations as well as galactic and extragalactic studies. Here we present the science cases that drive the design of SCALES. We describe an end-to-end instrument simulator that we use to track requirements, and show simulations of expected science yields for each driving science case. We conclude with a discussion of preparations for early science when the instrument sees first light in $\sim2025$. △ Less

Submitted 10 October, 2023; originally announced October 2023.

Comments: 10 pages, 16 figures, submitted to Proceedings of the SPIE