-
NiOx passivation in perovskite solar cells: from surface reactivity to device performance
Authors:
John Mohanraj,
Bipasa Samanta,
Osbel Almora,
Renán Escalante,
Lluis F. Marsal,
Sandra Jenatsch,
Arno Gadola,
Beat Ruhstaller,
Juan A. Anta,
Maytal Caspary Toroker,
Selina Olthof
Abstract:
Non-stoichiometric nickel oxide (NiOx) is the only metal oxide successfully used as hole transport material in p-i-n type perovskite solar cells (PSCs). Its favorable opto-electronic properties and facile large-scale preparation methods are potentially relevant for future commercialization of PSCs, though currently low operational stability of PSCs containing NiOx hole transport layers are reporte…
▽ More
Non-stoichiometric nickel oxide (NiOx) is the only metal oxide successfully used as hole transport material in p-i-n type perovskite solar cells (PSCs). Its favorable opto-electronic properties and facile large-scale preparation methods are potentially relevant for future commercialization of PSCs, though currently low operational stability of PSCs containing NiOx hole transport layers are reported. Poorly understood degradation reactions at the interface to the perovskite are seen as cause for the inferior stability and a variety of interface passivation approaches have been shown to be effective in improving the overall solar cell performance. To gain a better understanding of the processes happening at this interface, we systematically passivated possible specific defects on NiOx with three different categories of organic/inorganic compounds. The effects on the NiOx and the perovskite (MAPbI3) were investigated using x-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and scanning electron microscopy (SEM) where we find that the structural stability and film formation can be significantly affected. In combination with Density Functional Theory (DFT) calculations, a likely origin of NiOx-perovskite degradation interactions is proposed. The surface passivated NiOx was incorporated into MAPbI3 based PSCs and its influence on overall performance, particularly operational stability, was investigated by current-voltage (J-V), impedance spectroscopy (IS), and open circuit voltage decay (OCVD) measurements. Interestingly, we find that a superior structural stability due to an interface passivation must not relate to high operational stability. The discrepancy comes from the formation of excess ions at the interface which negatively impacts all solar cell parameters.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
Degradation Analysis of Perovskite Solar Cells via Short-Circuit Impedance Spectroscopy: A case study on NiOx passivation
Authors:
Osbel Almora,
Pilar López-Varo,
Renán Escalante,
John Mohanraj,
Luis F Marsal,
Selina Olthof,
Juan A. Anta
Abstract:
Perovskite solar cells (PSCs) continue to be the front runner technology among emerging photovoltaic devices in terms of power conversion efficiency and application versatility. However, not only the stability but also the understanding of their ionic-electronic transport mechanisms continues to be challenging. In this work, the case study of NiOx-based inverted PSCs and the effect of different in…
▽ More
Perovskite solar cells (PSCs) continue to be the front runner technology among emerging photovoltaic devices in terms of power conversion efficiency and application versatility. However, not only the stability but also the understanding of their ionic-electronic transport mechanisms continues to be challenging. In this work, the case study of NiOx-based inverted PSCs and the effect of different interface passivating treatments on the device performance are approached. Our experiments include impedance spectroscopy (IS) measurements in short-circuit under different illumination intensities and operational stability tests under constant illumination intensity. It is found that certain surface treatments lead to more stable performance. However, protic anion donors can induce, both, an initial performance decrease and a subsequent reactivity during light exposure which apparently improves the cells performance. Our drift-diffusion simulations suggest that the modification of the interface with the hole transport material may have decrease the conductivity, as well as the ion and electron mobilities at the perovskite and the NiOx, respectively. Importantly, capacitance and resistance are shown to peak maximum and minimum values, respectively, around specific ranges of mobile ion concentration. Our results introduce a general route for characterization of degradation paths in PSCs via IS in short-circuit.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Effect of the anodization voltage on the porewidening rate of nanoporous anodic alumina
Authors:
Mohammad Mahbubur Rahman,
Enric Garcia-Caurel,
Abel Santos,
Lluis F. Marsal,
Josep Pallares,
Josep Ferre-Borrull
Abstract:
A detailed study of the pore-widening rate of nanoporous anodic alumina layers as a function of the anodization voltage was carried out. The study focuses on samples produced under the same electrolyte and concentration but different anodization voltages within the self-ordering regime. By means of ellipsometry-based optical characterization, it is shown that in the porewidening process, the poros…
▽ More
A detailed study of the pore-widening rate of nanoporous anodic alumina layers as a function of the anodization voltage was carried out. The study focuses on samples produced under the same electrolyte and concentration but different anodization voltages within the self-ordering regime. By means of ellipsometry-based optical characterization, it is shown that in the porewidening process, the porosity increases at a faster rate for lower anodization voltages. This opens the possibility of obtaining three-dimensional nanostructured nanoporous anodic alumina with controlled thickness and refractive index of each layer, and with a refractive index difference of up to 0.24 between layers, for samples produced with oxalic acid electrolytes.
△ Less
Submitted 1 October, 2012; v1 submitted 21 September, 2012;
originally announced September 2012.
-
Photonic stop bands in quasi-random nanoporous anodic alumina structures
Authors:
Ivan Maksymov,
Josep Ferre-Borrull,
Josep Pallares,
Lluis F. Marsal
Abstract:
The existence of photonic stop bands in the self-assembled arrangement of pores in porous anodic alumina structures is investigated by means of rigorous 2D finite- difference time-domain calculations. Self-assembled porous anodic alumina shows a random distribution of domains, each of them with a very definite triangular pattern, constituting a quasi-random structure. The observed stop bands are s…
▽ More
The existence of photonic stop bands in the self-assembled arrangement of pores in porous anodic alumina structures is investigated by means of rigorous 2D finite- difference time-domain calculations. Self-assembled porous anodic alumina shows a random distribution of domains, each of them with a very definite triangular pattern, constituting a quasi-random structure. The observed stop bands are similar to those of photonic quasicrystals or random structures. As the pores of nanoporous anodic alumina can be infiltrated with noble metals, nonlinear or active media, it makes this material very attractive and cost-effective for applications including inhibition of spontaneous emission, random lasing, LEDs and biosensors.
△ Less
Submitted 4 May, 2011;
originally announced May 2011.
