-
HR-EBSD analysis of in situ stable crack growth at the micron scale
Authors:
Abdalrhaman Koko,
Thorsten H. Becker,
Elsiddig Elmukashfi,
Nicola M. Pugno,
Angus J. Wilkinson,
T. James Marrow
Abstract:
Understanding the local fracture resistance of microstructural features. such as brittle inclusions, coatings, and interfaces at the microscale under complex loading conditions is critical for microstructure-informed design of materials. In this study, a novel approach has been formulated to decompose the J-integral evaluation of the elastic energy release rate to the three-dimensional stress inte…
▽ More
Understanding the local fracture resistance of microstructural features. such as brittle inclusions, coatings, and interfaces at the microscale under complex loading conditions is critical for microstructure-informed design of materials. In this study, a novel approach has been formulated to decompose the J-integral evaluation of the elastic energy release rate to the three-dimensional stress intensity factors directly from experimental measurements of the elastic deformation gradient tensors of the crack field by in situ high (angular) resolution electron backscatter diffraction (HR-EBSD). An exemplar study is presented of a quasi-static crack, inclined to the observed surface, propagating on low index {hkl} planes in a (001) single crystal silicon wafer.
△ Less
Submitted 14 September, 2022; v1 submitted 21 June, 2022;
originally announced June 2022.
-
An iterative method for reference pattern selection in high resolution electron backscatter diffraction (HR-EBSD)
Authors:
Abdalrhaman Koko,
Vivian Tong,
Angus J. Wilkinson,
T. James Marrow
Abstract:
For high (angular) resolution electron backscatter diffraction (HR-EBSD), the selection of a reference diffraction pattern (EBSP0) significantly affects the precision of the calculated strain and rotation maps. This effect was demonstrated in plastically deformed body-centred cubic and face-centred cubic ductile metals (ferrite and austenite grains in duplex stainless steel) and brittle single-cry…
▽ More
For high (angular) resolution electron backscatter diffraction (HR-EBSD), the selection of a reference diffraction pattern (EBSP0) significantly affects the precision of the calculated strain and rotation maps. This effect was demonstrated in plastically deformed body-centred cubic and face-centred cubic ductile metals (ferrite and austenite grains in duplex stainless steel) and brittle single-crystal silicon, which showed that the effect is not only limited to measurement magnitude but also spatial distribution. An empirical relationship was then identified between the cross-correlation parameter and angular error, which was used in an iterative algorithm to identify the optimal reference pattern that maximises the precision of HR-EBSD.
△ Less
Submitted 16 January, 2023; v1 submitted 21 June, 2022;
originally announced June 2022.
-
A Computational Method for the Determination of the Elastic Displacement Field using Measured Elastic Deformation Field
Authors:
Abdalrhaman Koko,
James Marrow,
Elsiddig Elmukashfi
Abstract:
A novel approach was derived to compute the elastic displacement field from a measured elastic deformation field (i.e., deformation gradient or strain). The method is based on integrating the deformation field using Finite Element discretisation. Space and displacement fields are approximated using piece-wise interpolation functions. Hence, the full elastic deformation field can be expressed as no…
▽ More
A novel approach was derived to compute the elastic displacement field from a measured elastic deformation field (i.e., deformation gradient or strain). The method is based on integrating the deformation field using Finite Element discretisation. Space and displacement fields are approximated using piece-wise interpolation functions. Hence, the full elastic deformation field can be expressed as nodal displacements, the unknowns. The nodal displacements are then obtained using a least square method. The proposed method was applied to the symmetrical (residual) elastic deformation field measured using high (angular) resolution electron backscatter diffraction around a Vickers micro-indenting impression on a (001) mono-Si crystal sample with the integrated out-of-plane surface displacements matched with the impression topography measured using. The (residual) displacement field was used as the boundary conditions to calculate the three-dimensional stress intensity factors (K_(I,II,III)) at the cracks emanating from the indentation.
△ Less
Submitted 12 June, 2022; v1 submitted 21 July, 2021;
originally announced July 2021.
-
Characterisation of slip and twin activity using digital image correlation and crystal plasticity finite element simulation: Application to orthorhombic $α$-uranium
Authors:
Nicolò Grilli,
Philip Earp,
Alan C. F. Cocks,
James Marrow,
Edmund Tarleton
Abstract:
Calibrating and verifying crystal plasticity material models is a significant challenge, particularly for materials with a number of potential slip and twin systems. Here we use digital image correlation on coarse-grained $α$-uranium during tensile testing in conjunction with crystal plasticity finite element simulations. This approach allows us to determine the critical resolved shear stress, and…
▽ More
Calibrating and verifying crystal plasticity material models is a significant challenge, particularly for materials with a number of potential slip and twin systems. Here we use digital image correlation on coarse-grained $α$-uranium during tensile testing in conjunction with crystal plasticity finite element simulations. This approach allows us to determine the critical resolved shear stress, and hardening rate of the different slip and twin systems. The constitutive model is based on dislocation densities as state variables and the simulated geometry is constructed from electron backscatter diffraction images that provide shape, size and orientation of the grains, allowing a direct comparison between virtual and real experiments. An optimisation algorithm is used to find the model parameters that reproduce the evolution of the average strain in each grain as the load is increased. A tensile bar, containing four grains aligned with the load direction, is used to calibrate the model with eight unknown parameters. The approach is then independently validated by simulating the strain distribution in a second tensile bar. Different mechanisms for the hardening of the twin systems are evaluated. The latent hardening of the most active twin system turns out to be determined by coplanar twins and slip. The hardening rate of the most active slip system is lower than in fine-grained $α$-uranium. The method developed in the present research can be applied to identify the critical resolved shear stress and hardening parameters of other coarse-grained materials.
△ Less
Submitted 22 November, 2020;
originally announced November 2020.
-
FAFNIR: Strategy and risk reduction in accelerator driven neutron sources for fusion materials irradiation data
Authors:
E. Surrey,
M. Porton,
A. Caballero,
T. Davenne,
D. Findlay,
A. Letchford,
J. Thomason,
J. Marrow,
S. Roberts,
A. Seryi,
B. Connolly,
P. Mummery,
H. Owen
Abstract:
The need to populate the fusion materials engineering data base has long been recognized, the IFMIF facility being the present proposed neutron source for this purpose. Re-evaluation of the regulatory approach for the EU proposed DEMO device shows that the specification of the neutron source can be reduced with respect to IFMIF, allowing lower risk technology solutions to be considered. The justif…
▽ More
The need to populate the fusion materials engineering data base has long been recognized, the IFMIF facility being the present proposed neutron source for this purpose. Re-evaluation of the regulatory approach for the EU proposed DEMO device shows that the specification of the neutron source can be reduced with respect to IFMIF, allowing lower risk technology solutions to be considered. The justification for this approach is presented and a description of a proposed facility, FAFNIR, is presented with more detailed discussion of the accelerator and target designs.
△ Less
Submitted 2 December, 2014;
originally announced December 2014.
-
Reducing Risk and Accelerating Delivery of a Neutron Source for Fusion Materials Research
Authors:
E. Surrey,
M. Porton,
T. Davenne,
D. Findlay,
A. Letchford,
J. Thomason,
S. G. Roberts,
J. Marrow,
A. Seryi,
B. Connolly,
H. Owen
Abstract:
The materials engineering data base relevant to fusion irradiation is poorly populated and it has long been recognized that a fusion spectrum neutron source will be required, the facility IFMIF being the present proposal. Re- evaluation of the regulatory approach for the EU proposed DEMO device shows that the purpose of the source can be changed from lifetime equivalent irradiation exposure to dat…
▽ More
The materials engineering data base relevant to fusion irradiation is poorly populated and it has long been recognized that a fusion spectrum neutron source will be required, the facility IFMIF being the present proposal. Re- evaluation of the regulatory approach for the EU proposed DEMO device shows that the purpose of the source can be changed from lifetime equivalent irradiation exposure to data generation at lower levels of exposure by adopting a defence in depth strategy and regular component surveillance. This reduces the specification of the source with respect to IFMIF allowing lower risk technology solutions to be considered. A description of such a source, the Facility for Fusion Neutron Irradiation Research, FAFNIR, is presented here along with project timescales and costs.
△ Less
Submitted 18 July, 2014;
originally announced July 2014.
