Showing 1–23 of 23 results for author: Marocchino, A

Plasma ramps caused by outflow in gas-filled capillaries

Authors: F. Filippi, M. P. Anania, A. Biagioni, E. Brentegani, E. Chiadroni, A. Cianchi, M. Ferrario, A. Marocchino, A. Zigler

Abstract: Plasma confinement inside capillaries has been developed in the past years for plasma-based acceleration to ensure a stable and repeatable plasma density distribution during the interaction with either particles or laser beams. In particular, gas-filled capillaries allow a stable and almost predictable plasma distribution along the interaction with the particles. However, the plasma ejected throug… ▽ More Plasma confinement inside capillaries has been developed in the past years for plasma-based acceleration to ensure a stable and repeatable plasma density distribution during the interaction with either particles or laser beams. In particular, gas-filled capillaries allow a stable and almost predictable plasma distribution along the interaction with the particles. However, the plasma ejected through the ends of the capillary interacts with the beam before the inner plasma, affecting the quality of the beam. In this article we report the measurements on the evolution of the plasma flow at the two ends of a 1 cm long, 1 mm diameter capillary filled with hydrogen. In particular, we measured the longitudinal density distribution and the expansion velocity of the plasma outside the capillary. This study will allow a better understanding of the beam-plasma interaction for future plasma-based experiments. △ Less

Submitted 27 February, 2018; originally announced February 2018.

Comments: 5 pages, 6 figures, EAAC 2017

EuPRAXIA@SPARC_LAB: the high-brightness RF photo-injector layout proposal

Authors: A. Giribono, A. Bacci, E. Chiadroni, A. Cianchi, M. Croia, M. Ferrario, A. Marocchino, V. Petrillo, R. Pompili, S. Romeo, M. Rossetti Conti, A. R. Rossi, C. Vaccarezza

Abstract: At EuPRAXIA@SPARC_LAB, the unique combination of an advanced high-brightness RF injector and a plasma-based accelerator will drive a new multi-disciplinary user-facility. The facility, that is currently under study at INFN-LNF Laboratories (Frascati, Italy) in synergy with the EuPRAXIA collaboration, will operate the plasma-based accelerator in the external injection configuration. Since in this c… ▽ More At EuPRAXIA@SPARC_LAB, the unique combination of an advanced high-brightness RF injector and a plasma-based accelerator will drive a new multi-disciplinary user-facility. The facility, that is currently under study at INFN-LNF Laboratories (Frascati, Italy) in synergy with the EuPRAXIA collaboration, will operate the plasma-based accelerator in the external injection configuration. Since in this configuration the stability and reproducibility of the acceleration process in the plasma stage is strongly influenced by the RF-generated electron beam, the main challenge for the RF injector design is related to generating and handling high quality electron beams. In the last decades of R&D activity, the crucial role of high-brightness RF photo-injectors in the fields of radiation generation and advanced acceleration schemes has been largely established, making them effective candidates to drive plasma-based accelerators as pilots for user facilities. An RF injector consisting in a high-brightness S-band photo-injector followed by an advanced X-band linac has been proposed for the EuPRAXIA@SPARC_LAB project. The electron beam dynamics in the photo-injector has been explored by means of simulations, resulting in high-brightness, ultra-short bunches with up to 3 kA peak current at the entrance of the advanced X-band linac booster. The EuPRAXIA@SPARC_LAB high-brightness photo-injector is described here together with performance optimisation and sensitivity studies aiming to actual check the robustness and reliability of the desired working point. △ Less

Submitted 25 February, 2018; originally announced February 2018.

Comments: 5 pages,5 figures, EAAC2017

Plasma boosted electron beams for driving Free Electron Lasers

Authors: A. R. Rossi, V. Petrillo, A. Bacci, E. Chiadroni, A. Cianchi, M. Ferrario, A. Giribono, A. Marocchino, M. Rossetti Conti, L. Serafini, C. Vaccarezza

Abstract: In this paper, we report results of simulations, in the framework of both EuPRAXIA \cite{Walk2017} and EuPRAXIA@SPARC\_LAB \cite{Ferr2017} projects, aimed at delivering a high brightness electron bunch for driving a Free Electron Laser (FEL) by employing a plasma post acceleration scheme. The boosting plasma wave is driven by a tens of \SI{}{\tera\watt} class laser and doubles the energy of an ext… ▽ More In this paper, we report results of simulations, in the framework of both EuPRAXIA \cite{Walk2017} and EuPRAXIA@SPARC\_LAB \cite{Ferr2017} projects, aimed at delivering a high brightness electron bunch for driving a Free Electron Laser (FEL) by employing a plasma post acceleration scheme. The boosting plasma wave is driven by a tens of \SI{}{\tera\watt} class laser and doubles the energy of an externally injected beam up to \GeV{1}. The injected bunch is simulated starting from a photoinjector, matched to plasma, boosted and finally matched to an undulator, where its ability to produce FEL radiation is verified to yield $O(\num{e11})$ photons per shot at \nm{2.7}. △ Less

Submitted 19 February, 2018; originally announced February 2018.

Comments: 5 pages, 2 figures

Simulation design for forthcoming high quality plasma wakefield acceleration experiment in linear regime at SPARC_LAB

Authors: Stefano Romeo, Enrica Chiadroni, Michele Croia, Massimo Ferrario, Anna Giribono, Alberto Marocchino, Francesco Mira, Riccardo Pompili, Andrea Renato Rossi, Cristina Vaccarezza

Abstract: In the context of plasma wakefield acceleration beam driven, we exploit a high density charge trailing bunch whose self-fields act by mitigating the energy spread increase via beam loading compensation, together with bunch self-contain operated by the self-consistent transverse field. The work, that will be experimentally tested in the SPARC_LAB test facility, consists of a parametric scan that al… ▽ More In the context of plasma wakefield acceleration beam driven, we exploit a high density charge trailing bunch whose self-fields act by mitigating the energy spread increase via beam loading compensation, together with bunch self-contain operated by the self-consistent transverse field. The work, that will be experimentally tested in the SPARC_LAB test facility, consists of a parametric scan that allows to find optimized parameters in order to preserve the high quality of the trailing bunch over the entire centimeters acceleration length, with a final energy spread increase of 0.1% and an emittance increase of 5 nm. The stability of trailing bunch parameters after acceleration is tested employing a systematic scan of the parameters of the bunches at the injection. The results show that the energy spread increase keeps lower than 1% and the emittance increase is lower than 0.02 mm mrad in all the simulations performed. The energy jitter is of the order of 5%. △ Less

Submitted 14 February, 2018; originally announced February 2018.

Design of high brightness Plasma Wakefield Acceleration experiment at SPARC\_LAB test facility with particle-in-cell simulations

Authors: Alberto Marocchino, Enrica Chiadroni, Massimo Ferrario, Francesco Mira, Andrea Renato Rossi

Abstract: The present numerical investigation of a Plasma Wakefield Acceleration scenario in the weakly non linear regime with external injection is motivated by the upcoming campaigns at the SPARC\_LAB test facility where the final goal is to demonstrate modest gradient acceleration ($\sim$1 GV/m) with no quality loss. The accelerated bunch can be envisioned to seed a free electron laser. The numerical stu… ▽ More The present numerical investigation of a Plasma Wakefield Acceleration scenario in the weakly non linear regime with external injection is motivated by the upcoming campaigns at the SPARC\_LAB test facility where the final goal is to demonstrate modest gradient acceleration ($\sim$1 GV/m) with no quality loss. The accelerated bunch can be envisioned to seed a free electron laser. The numerical study has been conducted with the particle-in-cell code ${\tt ALaDyn}$, an exhaustive description of the plasma-acceleration version is provided. The configuration consider a two bunches setup with parameters in the facility range, the bunches are generated and pre-accelerated up to 100 MeV by a high brightness photo-injector prior plasma injection. To verify the working point robustness we have considered case scenario where the driver bunch reaches the plasma or with a larger dimension or with large emittance. We also present an analytical approach based on the envelope equation that allows to reduce the matching condition in the presence of a ramp. Here, we limit our interest to a simplified theoretical case with a linear plasma ramp. As a final aspect we propose to combine classical integrated bunch diagnostics with the test by Shapiro-Wilk, a mathematical test to diagnose bunch deviation from a Gaussian distribution. △ Less

Submitted 12 February, 2018; originally announced February 2018.

Plasma acceleration limitations due to betatron radiation

Authors: V. Shpakov, E. Chiadroni, A. Curcio, H. Fares, M. Ferrario, A. Marocchino, F. Mira, V. Petrillo, A. R. Rossi, S. Romeo

Abstract: High energy spread caused by the longitudinal size of the beam is well known in wake-field acceleration. Usually this issue can be solved with beam loading effect that allows to keep accelerating field nearly constant, along the whole duration of the beam. In this work, however, we would like to address another source of energy spread that arises at high energy, due to betatron radiation. High energy spread caused by the longitudinal size of the beam is well known in wake-field acceleration. Usually this issue can be solved with beam loading effect that allows to keep accelerating field nearly constant, along the whole duration of the beam. In this work, however, we would like to address another source of energy spread that arises at high energy, due to betatron radiation. △ Less

Submitted 9 February, 2018; originally announced February 2018.

Comments: EAAC 2017 proceedings paper

Characterization of self-injected electron beams from LWFA experiments at SPARC_LAB

Authors: G. Costa, M. P. Anania, F. Bisesto, E. Chiadroni, A. Cianchi, A. Curcio, M. Ferrario, F. Filippi, A. Marocchino, F. Mira, R. Pompili, A. Zigler

Abstract: The plasma-based acceleration is an encouraging technique to overcome the limits of the accelerating gradient in the conventional RF acceleration. A plasma accelerator is able to provide accelerating fields up to hundreds of $GeV/m$, paving the way to accelerate particles to several MeV over a short distance (below the millimetre range). Here the characteristics of preliminary electron beams obtai… ▽ More The plasma-based acceleration is an encouraging technique to overcome the limits of the accelerating gradient in the conventional RF acceleration. A plasma accelerator is able to provide accelerating fields up to hundreds of $GeV/m$, paving the way to accelerate particles to several MeV over a short distance (below the millimetre range). Here the characteristics of preliminary electron beams obtained with the self-injection mechanism produced with the FLAME high-power laser at the SPARC_LAB test facility are shown. In detail, with an energy laser on focus of $1.5\ J$ and a pulse temporal length (FWHM) of $40\ fs$, we obtained an electron plasma density due to laser ionization of about $6 \times 10^{18}\ cm^{-3}$, electron energy up to $350\ MeV$ and beam charge in the range $(50 - 100)\ pC$. △ Less

Submitted 3 February, 2018; originally announced February 2018.

Comments: 6 pages, 11 figures, conference EAAC2017

The FLAME laser at SPARC_LAB

Authors: F. G. Bisesto, M. P. Anania, M. Bellaveglia, E. Chiadroni, A. Cianchi, G. Costa, A. Curcio, D. Di Giovenale, G. Di Pirro, M. Ferrario, F. Filippi, A. Gallo, A. Marocchino, R. Pompili, A. Zigler, C. Vaccarezza

Abstract: FLAME is a high power laser system installed at the SPARC_LAB Test Facility in Frascati (Italy). The ultra-intense laser pulses are employed to study the interaction with matter for many purposes: electron acceleration through LWFA, ion and proton generation exploiting the TNSA mechanism, study of new radiation sources and development of new electron diagnostics. In this work, an overview of the F… ▽ More FLAME is a high power laser system installed at the SPARC_LAB Test Facility in Frascati (Italy). The ultra-intense laser pulses are employed to study the interaction with matter for many purposes: electron acceleration through LWFA, ion and proton generation exploiting the TNSA mechanism, study of new radiation sources and development of new electron diagnostics. In this work, an overview of the FLAME laser system will be given, together with recent experimental results △ Less

Submitted 1 February, 2018; originally announced February 2018.

Comments: 6 pages, 5 figure, EAAC17 proceeding

Overview of Plasma Lens Experiments and Recent Results at SPARC_LAB

Authors: E. Chiadroni, M. P. Anania, M. Bellaveglia, A. Biagioni, F. Bisesto, E. Brentegani, F. Cardelli, A. Cianchi, G. Costa, D. Di Giovenale, G. Di Pirro, M. Ferrario, F. Filippi, A. Gallo, A. Giribono, A. Marocchino, A. Mostacci, L. Piersanti, R. Pompili, J. B. Rosenzweig, A. R. Rossi, J. Scifo, V. Shpakov, C. Vaccarezza, F. Villa , et al. (1 additional authors not shown)

Abstract: Beam injection and extraction from a plasma module is still one of the crucial aspects to solve in order to produce high quality electron beams with a plasma accelerator. Proper matching conditions require to focus the incoming high brightness beam down to few microns size and to capture a high divergent beam at the exit without loss of beam quality. Plasma-based lenses have proven to provide focu… ▽ More Beam injection and extraction from a plasma module is still one of the crucial aspects to solve in order to produce high quality electron beams with a plasma accelerator. Proper matching conditions require to focus the incoming high brightness beam down to few microns size and to capture a high divergent beam at the exit without loss of beam quality. Plasma-based lenses have proven to provide focusing gradients of the order of kT/m with radially symmetric focusing thus promising compact and affordable alternative to permanent magnets in the design of transport lines. In this paper an overview of recent experiments and future perspectives of plasma lenses is reported. △ Less

Submitted 1 February, 2018; originally announced February 2018.

EUPRAXIA@SPARC_LAB: Beam Dynamics studies for the X-band Linac

Authors: C. Vaccarezza, D. Alesini, A. Bacci, A. Cianchi, E. Chiadroni, M. Croia, M. Diomede, M. Ferrario, A. Gallo, A. Giribono, A. Latina, A. Marocchino, V. Petrillo, R. Pompili, S. Romeo, M. Rossetti Conti, A. R. Rossi, L. Serafini, B. Spataro

Abstract: In the framework of the Eupraxia Design Study an advanced accelerator facility EUPRAXIA@SPARC_LAB has been proposed to be realized at Frascati (Italy) Laboratories of INFN. Two advanced acceleration schemes will be applied, namely an ultimate high gradient 1 GeV X-band linac together with a plasma acceleration stage to provide accelerating gradients of the GeV/m order. A FEL scheme is foreseen to… ▽ More In the framework of the Eupraxia Design Study an advanced accelerator facility EUPRAXIA@SPARC_LAB has been proposed to be realized at Frascati (Italy) Laboratories of INFN. Two advanced acceleration schemes will be applied, namely an ultimate high gradient 1 GeV X-band linac together with a plasma acceleration stage to provide accelerating gradients of the GeV/m order. A FEL scheme is foreseen to produce X-ray beams within 3-10 nm range. A 500-TW Laser system is also foreseen for electron and ion production experiments and a Compton backscattering Interaction is planned together with extraction beamlines at intermediate electron beam energy for neutron beams and THz radiation production. The electron beam dynamics studies in the linac are here presented together with the preliminary machine layout. △ Less

Submitted 30 January, 2018; originally announced January 2018.

Comments: 5 pages, 3 figures, NIM-A proceedings of EAAC2017

EuPRAXIA@SPARC_LAB Design study towards a compact FEL facility at LNF

Authors: M. Ferrario, D. Alesini, M. P. Anania, M. Artioli, A. Bacci, S. Bartocci, R. Bedogni, M. Bellaveglia, A. Biagioni, F. Bisesto, F. Brandi, E. Brentegani, F. Broggi, B. Buonomo, P. L. Campana, G. Campogiani, C. Cannaos, S. Cantarella, F. Cardelli, M. Carpanese, M. Castellano, G. Castorina, N. Catalan Lasheras, E. Chiadroni, A. Cianchi , et al. (95 additional authors not shown)

Abstract: On the wake of the results obtained so far at the SPARC\_LAB test-facility at the Laboratori Nazionali di Frascati (Italy), we are currently investigating the possibility to design and build a new multi-disciplinary user-facility, equipped with a soft X-ray Free Electron Laser (FEL) driven by a $\sim$1 GeV high brightness linac based on plasma accelerator modules. This design study is performed in… ▽ More On the wake of the results obtained so far at the SPARC\_LAB test-facility at the Laboratori Nazionali di Frascati (Italy), we are currently investigating the possibility to design and build a new multi-disciplinary user-facility, equipped with a soft X-ray Free Electron Laser (FEL) driven by a $\sim$1 GeV high brightness linac based on plasma accelerator modules. This design study is performed in synergy with the EuPRAXIA design study. In this paper we report about the recent progresses in the on going design study of the new facility. △ Less

Submitted 26 January, 2018; originally announced January 2018.

Recent results at SPARC_LAB

Authors: R. Pompili, M. P. Anania, M. Bellaveglia, A. Biagioni, S. Bini, F. Bisesto, E. Chiadroni, A. Cianchi, G. Costa, D. Di Giovenale, M. Ferrario, F. Filippi, A. Gallo, A. Giribono, V. Lollo, A. Marocchino, V. Martinelli, A. Mostacci, G. Di Pirro, S. Romeo, J. Scifo, V. Shpakov, C. Vaccarezza, F. Villa, A. Zigler

Abstract: The current activity of the SPARC_LAB test-facility is focused on the realization of plasma-based acceleration experiments with the aim to provide accelerating field of the order of several GV/m while maintaining the overall quality (in terms of energy spread and emittance) of the accelerated electron bunch. In the following, the current status of such an activity is presented. We also show result… ▽ More The current activity of the SPARC_LAB test-facility is focused on the realization of plasma-based acceleration experiments with the aim to provide accelerating field of the order of several GV/m while maintaining the overall quality (in terms of energy spread and emittance) of the accelerated electron bunch. In the following, the current status of such an activity is presented. We also show results related to the usability of plasmas as focusing lenses in view of a complete plasma-based focusing and accelerating system. △ Less

Submitted 18 January, 2018; originally announced January 2018.

Characterisation of beam driven ionisation injection in the blowout regime of Plasma Acceleration

Authors: Francesco Mira, Massimo Ferrario, Pasquale Londrillo, Alberto Marocchino

Abstract: Beam driven ionisation injection is characterised for a variety of high-Z dopant. We discuss the region of extraction and why the position where electrons are captured influences the final quality of the internally-injected bunch. The beam driven ionisation injection relies on the capability to produce a high gradient fields at the bubble closure, with magnitudes high enough to ionise by tunnellin… ▽ More Beam driven ionisation injection is characterised for a variety of high-Z dopant. We discuss the region of extraction and why the position where electrons are captured influences the final quality of the internally-injected bunch. The beam driven ionisation injection relies on the capability to produce a high gradient fields at the bubble closure, with magnitudes high enough to ionise by tunnelling effect the still bounded electrons (of a high-Z dopant). The ionised electrons are captured by the nonlinear plasma wave at the accelerating and focusing wake phase leading to high-brightness trailing bunches. The high transformer ratio guarantees that the ionisation only occurs at the bubble closure. The quality of the ionisation-injected trailing bunches strongly and non-linearly depends on the properties of the dopant gas (density and initial ionisation state). We use the full 3D PIC code ${\tt ALaDyn}$ to consider the highly three-dimensional nature of the effect. By means of a systematic approach we have investigated the emittance and energy spread formation and the evolution for different dopant gases and configurations. △ Less

Submitted 12 January, 2018; originally announced January 2018.

Summary and report Working Group 6: theory and simulation, for the third edition of the European Advanced Accelerator Concept Conference

Authors: Alberto Marocchino, Arnaud Beck

Abstract: The theory and simulation working group (working group 6) of the third edition of the European Advanced Accelerator Workshop has been characterized by a strong numerical connotation. Particle in cell codes have proven to be a necessary tool to finely investigate the underlying physics both for laser and plasma wakefield acceleration processes. This year, the section has been characterised by an in… ▽ More The theory and simulation working group (working group 6) of the third edition of the European Advanced Accelerator Workshop has been characterized by a strong numerical connotation. Particle in cell codes have proven to be a necessary tool to finely investigate the underlying physics both for laser and plasma wakefield acceleration processes. This year, the section has been characterised by an interest in the limitation of the numerical Cherenkov effect, the mitigation of the hose-instability, start-to-end simulations and more generally on new numerical schemes and diagnostics. △ Less

Submitted 12 January, 2018; originally announced January 2018.

RF injector design studies for the trailing witness bunch for a plasma-based user facility

Authors: A. Giribono, A. Bacci, E. Chiadroni, A. Cianchi, M. Croia, M. Ferrario, A. Marocchino, V. Petrillo, R. Pompili, S. Romeo, M. Rossetti Conti, A. R. Rossi, C. Vaccarezza

Abstract: The interest in plasma-based accelerators as drivers of user facilities is growing worldwide thanks to its compactness and reduced costs. In this context the EuPRAXIA collaboration is preparing a conceptual design report for a multi-GeV plasma-based accelerator with outstanding electron beam quality to pilot, among several applications, the operation of an X-ray FEL, the most demanding in terms of… ▽ More The interest in plasma-based accelerators as drivers of user facilities is growing worldwide thanks to its compactness and reduced costs. In this context the EuPRAXIA collaboration is preparing a conceptual design report for a multi-GeV plasma-based accelerator with outstanding electron beam quality to pilot, among several applications, the operation of an X-ray FEL, the most demanding in terms of beam brightness. Intense beam dynamics studies have been performed to provide a reliable working point for the RF injector to generate a high-brightness trailing witness bunch suitable in external injection schemes, both in particle beam and laser driven plasma wakefield acceleration. A case of interest is the generation of a witness beam with 1 GeV energy, less than 1 mm-mrad slice emittance and 30 pC in 10 fs FWHM bunch length, which turns into 3 kA peak current at the undulator entrance. The witness beam has been successfully compressed down to 10 fs in a conventional SPARC-like photo-injector and boosted up to 500 MeV in an advanced high-gradient X-band linac reaching the plasma entrance with 3 kA peak current and the following RMS values: 0.06% energy spread, 0.5 mm-mrad transverse normalised emittance and a focal spot down to 1 $μm$. RF injector studies are here presented with the aim to satisfy the EuPRAXIA requests for the Design Study of a plasma-based user facility. △ Less

Submitted 16 January, 2018; v1 submitted 9 January, 2018; originally announced January 2018.

Comments: 5 pages, 7 figures, European Advanced Accelerator Concepts 2017

A muon source based on plasma accelerators

Authors: L. Serafini, I. Drebot, A. Bacci, F. Broggi, C. Curatolo, A. Marocchino, N. Panzeri, V. Petrillo, A. Rossi, M. Rossetti Conti

Abstract: The conceptual design of a compact source of GeV-class muons is presented, based on a plasma based electron-gamma collider. Evaluations of muon flux, spectra and brilliance are presented, carried out with ad-hoc montecarlo simulations of the electron-gamma collisions. These are analyzed in the context of a large spread of the invariant mass in the e-gamma interaction, due to the typical characteri… ▽ More The conceptual design of a compact source of GeV-class muons is presented, based on a plasma based electron-gamma collider. Evaluations of muon flux, spectra and brilliance are presented, carried out with ad-hoc montecarlo simulations of the electron-gamma collisions. These are analyzed in the context of a large spread of the invariant mass in the e-gamma interaction, due to the typical characteristics of plasma self-injected GeV electron beams, carrying large bunch charges with huge energy spread. The availability of a compact point-like muon source, triggerable at nsec level, may open a completely new scenario in the muon radiography application field. △ Less

Submitted 18 November, 2017; v1 submitted 16 November, 2017; originally announced November 2017.

Guiding of charged particle beams in curved capillary-discharge waveguides

Authors: Riccardo Pompili, Giovanni Castorina, Massimo Ferrario, Alberto Marocchino, Arie Zigler

Abstract: A new method able to transport charged particle beams along curved paths is presented. It is based on curved capillary-discharge waveguides in which the induced azimuthal magnetic field is used both to focus the beam and keep it close to the capillary axis. We show that such a solution is highly tunable, it allows to develop compact structures providing large deflecting angles and, unlike conventi… ▽ More A new method able to transport charged particle beams along curved paths is presented. It is based on curved capillary-discharge waveguides in which the induced azimuthal magnetic field is used both to focus the beam and keep it close to the capillary axis. We show that such a solution is highly tunable, it allows to develop compact structures providing large deflecting angles and, unlike conventional solutions based on bending magnets, preserves the beam longitudinal phase space. The latter feature, in particular, is very promising when dealing with ultra-short bunches for which non-trivial manipulations on the longitudinal phase spaces are usually required when employing conventional devices. △ Less

Submitted 12 December, 2017; v1 submitted 10 October, 2017; originally announced October 2017.

Journal ref: AIP Advances 8, 015326 (2018)

Optimising PICCANTE - an Open Source Particle-in-Cell Code for Advanced Simulations on Tier-0 Systems

Authors: Andrea Sgattoni, Luca Fedeli, Stefano Sinigardi, Alberto Marocchino, Andrea Macchi, Volker Weinberg, Anupam Karmakar

Abstract: We present a detailed strong and weak scaling analysis of PICCANTE, an open source, massively parallel, fully-relativistic Particle-In-Cell (PIC) code. PIC codes are widely used in plasma physics and astrophysics to study the cases where kinetic effects are relevant. PICCANTE is primarily developed to study laser-plasma interaction. Within a PRACE Preparatory Access Project, various revisions of d… ▽ More We present a detailed strong and weak scaling analysis of PICCANTE, an open source, massively parallel, fully-relativistic Particle-In-Cell (PIC) code. PIC codes are widely used in plasma physics and astrophysics to study the cases where kinetic effects are relevant. PICCANTE is primarily developed to study laser-plasma interaction. Within a PRACE Preparatory Access Project, various revisions of different routines of the code have been analysed on the HPC systems JUQUEEN at Juelich Supercomputing Centre (JSC), Germany, and FERMI at CINECA, Italy, to improve scalability and I/O performance of the application. The diagnostic tool Scalasca is used to identify suboptimal routines. Different output strategies are discussed. The detailed strong and weak scaling behaviour of the improved code are presented in comparison with the original version of the code. △ Less

Submitted 26 March, 2015; v1 submitted 9 March, 2015; originally announced March 2015.

Comments: 8 pages, 6 figures, PRACE Whitepaper

Report number: WP209

Experimental Studies of Magnetically Driven Plasma Jets

Authors: F. Suzuki-Vidal, S. V. Lebedev, S. N. Bland, G. N. Hall, G. Swadling, A. J. Harvey-Thompson, G. Burdiak, P. de Grouchy, J. P. Chittenden, A. Marocchino, M. Bocchi, A. Ciardi, A. Frank, S. C. Bott

Abstract: We present experimental results on the formation of supersonic, radiatively cooled jets driven by pressure due to the toroidal magnetic field generated by the 1.5 MA, 250 ns current from the MAGPIE generator. The morphology of the jet produced in the experiments is relevant to astrophysical jet scenarios in which a jet on the axis of a magnetic cavity is collimated by a toroidal magnetic field as… ▽ More We present experimental results on the formation of supersonic, radiatively cooled jets driven by pressure due to the toroidal magnetic field generated by the 1.5 MA, 250 ns current from the MAGPIE generator. The morphology of the jet produced in the experiments is relevant to astrophysical jet scenarios in which a jet on the axis of a magnetic cavity is collimated by a toroidal magnetic field as it expands into the ambient medium. The jets in the experiments have similar Mach number, plasma beta and cooling parameter to those in protostellar jets. Additionally the Reynolds, magnetic Reynolds and Peclet numbers are much larger than unity, allowing the experiments to be scaled to astrophysical flows. The experimental configuration allows for the generation of episodic magnetic cavities, suggesting that periodic fluctuations near the source may be responsible for some of the variability observed in astrophysical jets. Preliminary measurements of kinetic, magnetic and Poynting energy of the jets in our experiments are presented and discussed, together with estimates of their temperature and trapped toroidal magnetic field. △ Less

Submitted 10 December, 2010; originally announced December 2010.

Comments: 7 pages, 6 figures, accepted for publication in Astrophysics & Space Science

Journal ref: Astrophysics and Space Science, November 2011, Volume 336, Issue 1, pp 41-46

Scaling stellar jets to the laboratory: the power of simulations

Authors: Chantal Stehle, Andrea Ciardi, Jean-Philippe Colombier, Matthias Gonzalez, Thierry Lanz, Alberto Marocchino, Michaela Kozlova, Bedrich Rus

Abstract: Advances in laser and Z-pinch technology, coupled with the development of plasma diagnostics and the availability of high-performance computers, have recently stimulated the growth of high-energy density laboratory astrophysics. In particular a number of experiments have been designed to study radiative shocks and jets with the aim of shedding new light on physical processes linked to the ejecti… ▽ More Advances in laser and Z-pinch technology, coupled with the development of plasma diagnostics and the availability of high-performance computers, have recently stimulated the growth of high-energy density laboratory astrophysics. In particular a number of experiments have been designed to study radiative shocks and jets with the aim of shedding new light on physical processes linked to the ejection and accretion of mass by newly born stars. Although general scaling laws are a powerful tools to link laboratory experiments with astrophysical plasmas, the phenomena modelled are often too complicated for simple scaling to remain relevant. Nevertheless, the experiments can still give important insights into the physics of astrophysical systems and can be used to provide the basic experimental validation of numerical simulations in regimes of interest to astrophysics. We will illustrate the possible links between laboratory experiments, numerical simulations and astrophysics in the context of stellar jets. First we will discuss the propagation of stellar jets in a cross-moving interstellar medium and the scaling to Z-pinch produced jets. Our second example focuses on slab-jets produced at the PALS (Prague Asterix Laser System) laser installation and their practical applications to astrophysics. Finally, we illustrate the limitations of scaling for radiative shocks, which are found at the head of the most rapid stellar jets. △ Less

Submitted 21 December, 2009; originally announced December 2009.

Comments: 30 pages, 9 figures

Journal ref: Laser Part. Beams 27:709,2009

Formation of Episodic Magnetically Driven Radiatively Cooled Plasma Jets in the Laboratory

Authors: F. Suzuki-Vidal, S. V. Lebedev, A. Ciardi, S. N. Bland, J. P. Chittenden, G. N. Hall, A. Harvey-Thompson, A. Marocchino, C. Ning, C. Stehle, A. Frank, E. G. Blackman, S. C. Bott, T. Ray

Abstract: We report on experiments in which magnetically driven radiatively cooled plasma jets were produced by a 1 MA, 250 ns current pulse on the MAGPIE pulsed power facility. The jets were driven by the pressure of a toroidal magnetic field in a ''magnetic tower'' jet configuration. This scenario is characterized by the formation of a magnetically collimated plasma jet on the axis of a magnetic ''bubbl… ▽ More We report on experiments in which magnetically driven radiatively cooled plasma jets were produced by a 1 MA, 250 ns current pulse on the MAGPIE pulsed power facility. The jets were driven by the pressure of a toroidal magnetic field in a ''magnetic tower'' jet configuration. This scenario is characterized by the formation of a magnetically collimated plasma jet on the axis of a magnetic ''bubble'', confined by the ambient medium. The use of a radial metallic foil instead of the radial wire arrays employed in our previous work allows for the generation of episodic magnetic tower outflows which emerge periodically on timescales of ~30 ns. The subsequent magnetic bubbles propagate with velocities reaching ~300 km/s and interact with previous eruptions leading to the formation of shocks. △ Less

Submitted 1 April, 2009; originally announced April 2009.

Comments: 6 pages, 5 figures. Accepted for publication in Astrophysics & Space Science

Journal ref: Astrophys.Space Sci.322:19-23,2009

The evolution of magnetic tower jets in the laboratory

Authors: A. Ciardi, S. V. Lebedev, A. Frank, E. G. Blackman, J. P. Chittenden, C. J. Jennings, D. J. Ampleford, S. N. Bland, S. C. Bott, J. Rapley, G. N. Hall, F. A. Suzuki-Vidal, A. Marocchino, T. Lery, C. Stehle

Abstract: The evolution of laboratory produced magnetic jets is followed numerically through three-dimensional, non-ideal magnetohydrodynamic simulations. The experiments are designed to study the interaction of a purely toroidal field with an extended plasma background medium. The system is observed to evolve into a structure consisting of an approximately cylindrical magnetic cavity with an embedded mag… ▽ More The evolution of laboratory produced magnetic jets is followed numerically through three-dimensional, non-ideal magnetohydrodynamic simulations. The experiments are designed to study the interaction of a purely toroidal field with an extended plasma background medium. The system is observed to evolve into a structure consisting of an approximately cylindrical magnetic cavity with an embedded magnetically confined jet on its axis. The supersonic expansion produces a shell of swept-up shocked plasma which surrounds and partially confines the magnetic tower. Currents initially flow along the walls of the cavity and in the jet but the development of current-driven instabilities leads to the disruption of the jet and a re-arrangement of the field and currents. The top of the cavity breaks-up and a well collimated, radiatively cooled, 'clumpy' jet emerges from the system. △ Less

Submitted 14 November, 2006; originally announced November 2006.

Comments: 34 Pages, 10 Figure, Accepted for publication in Physics of Plasmas

Journal ref: Phys.Plasmas14:056501,2007

3D MHD Simulations of Laboratory Plasma Jets

Authors: A. Ciardi, S. V. Lebedev, A. Frank, E. G. Blackman, D. J. Ampleford, C. A. Jennings, J. P. Chittenden, T. Lery, S. N. Bland, S. C. Bott, G. N. Hall, J. Rapley, F. A. Suzuki Vidal, A. Marocchino

Abstract: Jets and outflows are thought to be an integral part of accretion phenomena and are associated with a large variety of objects. In these systems, the interaction of magnetic fields with an accretion disk and/or a magnetized central object is thought to be responsible for the acceleration and collimation of plasma into jets and wider angle flows. In this paper we present three-dimensional MHD sim… ▽ More Jets and outflows are thought to be an integral part of accretion phenomena and are associated with a large variety of objects. In these systems, the interaction of magnetic fields with an accretion disk and/or a magnetized central object is thought to be responsible for the acceleration and collimation of plasma into jets and wider angle flows. In this paper we present three-dimensional MHD simulations of magnetically driven, radiatively cooled laboratory jets that are produced on the MAGPIE experimental facility. The general outflow structure comprises an expanding magnetic cavity which is collimated by the pressure of an extended plasma background medium, and a magnetically confined jet which develops within the magnetic cavity. Although this structure is intrinsically transient and instabilities in the jet and disruption of the magnetic cavity ultimately lead to its break-up, a well collimated, knotty jet still emerges from the system; such clumpy morphology is reminiscent of that observed in many astrophysical jets. The possible introduction in the experiments of angular momentum and axial magnetic field will also be discussed. △ Less

Submitted 30 June, 2006; originally announced June 2006.

Comments: 15 pages, 4 figures, accepted by Astrophysics and Space Science for Special Issue High Energy Density Laboratory Astrophysics Conference

Journal ref: Astrophys.SpaceSci.307:17-22,2007