-
Terahertz Emission From Diamond Nitrogen-Vacancy Centers
Authors:
Sándor Kollarics,
Bence Gábor Márkus,
Robin Kucsera,
Gergő Thiering,
Ádám Gali,
Gergely Németh,
Katalin Kamarás,
László Forró,
Ferenc Simon
Abstract:
Coherent light sources emitting in the terahertz range are highly sought after for fundamental research and applications. THz lasers rely on achieving population inversion. We demonstrate the generation of THz radiation using nitrogen-vacancy (NV) centers in a diamond single crystal. Population inversion is achieved through the Zeeman splitting of the $S=1$ state in $15\ \text{T}$, resulting in a…
▽ More
Coherent light sources emitting in the terahertz range are highly sought after for fundamental research and applications. THz lasers rely on achieving population inversion. We demonstrate the generation of THz radiation using nitrogen-vacancy (NV) centers in a diamond single crystal. Population inversion is achieved through the Zeeman splitting of the $S=1$ state in $15\ \text{T}$, resulting in a splitting of $0.42\ \text{THz}$, where the middle $S_z=0$ sublevel is selectively pumped by visible light. To detect the THz radiation, we utilize a phase-sensitive THz setup, optimized for electron spin resonance measurements (ESR). We determine the spin-lattice relaxation time up to $15\ \text{T}$ using the light-induced ESR measurement, which shows the dominance of phonon-mediated relaxation and the high efficacy of the population inversion. The THz radiation is tunable by the magnetic field, thus these findings may lead to the next generation of tunable coherent THz sources.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
Beyond 1 ms Charge-Carrier Recombination Dynamics in the CsPbBr3 Perovskite
Authors:
A. Bojtor,
D. Krisztián,
F. Korsós,
S. Kollarics,
T. Pinel,
M. Kollár,
E. Horváth,
X. Mettan,
B. G. Márkus,
L. Forró,
F. Simon
Abstract:
Knowledge of the charge-carrier recombination lifetime, tau, is crucial for the various applications of photovoltaic perovskites. We studied the novel inorganic perovskite, CsPbBr3 and we observe recombination dynamics beyond 1 ms below 200 K and tau approaching 100 us at room temperature. Time-resolved microwave-detected photoconductivity decay (TRMCD), used in combination with injection dependen…
▽ More
Knowledge of the charge-carrier recombination lifetime, tau, is crucial for the various applications of photovoltaic perovskites. We studied the novel inorganic perovskite, CsPbBr3 and we observe recombination dynamics beyond 1 ms below 200 K and tau approaching 100 us at room temperature. Time-resolved microwave-detected photoconductivity decay (TRMCD), used in combination with injection dependence, evidence that tau is dominated by impurity charge trap**. The observed injection dependence is well corroborated by modeling of the trap mechanism. The ultra-long decay time is also consistent with photoconductivity measurements with a continuous-wave excitation at powers corresponding to around one Sun irradiation. While in principle charge-carrier trap** may limit the photovoltaic efficiency in single-cell photovoltaic devices, it could also lead to enhanced efficiency in tandem cells as well as for alternative applications including photodetection and quantum information storage.
△ Less
Submitted 25 June, 2023;
originally announced June 2023.
-
Ultralong 100 ns Spin Relaxation Time in Graphite at Room Temperature
Authors:
B. G. Márkus,
M. Gmitra,
B. Dóra,
G. Csősz,
T. Fehér,
P. Szirmai,
B. Náfrádi,
V. Zólyomi,
L. Forró,
J. Fabian,
F. Simon
Abstract:
Graphite has been intensively studied, yet its electron spins dynamics remains an unresolved problem even 70 years after the first experiments. The central quantities, the longitudinal ($T_1$) and transverse ($T_2$) relaxation times were postulated to be equal, mirroring standard metals, but $T_1$ has never been measured for graphite. Here, based on a detailed band structure calculation including…
▽ More
Graphite has been intensively studied, yet its electron spins dynamics remains an unresolved problem even 70 years after the first experiments. The central quantities, the longitudinal ($T_1$) and transverse ($T_2$) relaxation times were postulated to be equal, mirroring standard metals, but $T_1$ has never been measured for graphite. Here, based on a detailed band structure calculation including spin-orbit coupling, we predict an unexpected behavior of the relaxation times. We find, based on saturation ESR measurements, that $T_1$ is markedly different from $T_2$. Spins injected with perpendicular polarization with respect to the graphene plane have an extraordinarily long lifetime of $100$ ns at room temperature. This is ten times more than in the best graphene samples. The spin diffusion length across graphite planes is thus expected to be ultralong, on the scale of $\sim 70~μ$m, suggesting that thin films of graphite -- or multilayer AB graphene stacks -- can be excellent platforms for spintronics applications compatible with 2D van der Waals technologies. Finally, we provide a qualitative account of the observed spin relaxation based on the anisotropic spin admixture of the Bloch states in graphite obtained from density functional theory calculations.
△ Less
Submitted 22 May, 2023;
originally announced May 2023.
-
Ultra-long charge carrier recombination time in methylammonium lead halide perovskites
Authors:
A. Bojtor,
S. Kollarics,
B. G. Markus,
A. Sienkiewicz,
M. Kollar,
L. Forro,
F. Simon
Abstract:
Due to their exceptional photovoltaic properties, metal halide perovskites (MHPs) are extensively studied for their potential applications in solar cells. In recent years, the power conversion efficiencies of MHPs-based solar cells rapidly increased from the initial few \% towards more than 25\,\% for single-junction devices. Therefore, also taking into account their low costs and ease of manufact…
▽ More
Due to their exceptional photovoltaic properties, metal halide perovskites (MHPs) are extensively studied for their potential applications in solar cells. In recent years, the power conversion efficiencies of MHPs-based solar cells rapidly increased from the initial few \% towards more than 25\,\% for single-junction devices. Therefore, also taking into account their low costs and ease of manufacturing, MHPs-based solar cells have become the fastest-advancing photovoltaic technology. In this regard, much of the recent work has been dominated by absorber materials based on methylammonium MHPs, such as MAPbX$_3$, where MA=CH$_3$NH$_3$ and X=Cl, Br and I. Here, we present the results of contactless time-resolved photoconductivity measurements in an exceptionally wide range of temperatures of $4$ to $290\ \text{K}$ that were performed for the various crystalline forms of the three parent MAPbX$_3$, i.e., MAPbCl$_3$, MAPbBr$_3$ and MAPbI$_3$. This approach was made possible by the use of a high quality-factor (Q) microwave resonator, which cooperated with a commercially available microwave bridge equipped with an automatic frequency control (AFC) and a helium gas-flow cryostat.
△ Less
Submitted 11 August, 2022;
originally announced August 2022.
-
Polarised superlocalization in magnetic nanoparticle hyperthermia
Authors:
Zs. Iszaly,
I. Gresits,
I. G. Marian,
Gy. Thuroczy,
O. Sagi,
B. G. Markus,
F. Simon,
I. Nandori
Abstract:
Magnetic hyperthermia is an adjuvant therapy for cancer where injected magnetic nanoparticles are used to transfer energy from the time-dependent applied magnetic field into the surrounding medium. Its main importance is to be able to increase the temperature of the human body locally. This localization can be further increased by using a combination of static and alternating external magnetic fie…
▽ More
Magnetic hyperthermia is an adjuvant therapy for cancer where injected magnetic nanoparticles are used to transfer energy from the time-dependent applied magnetic field into the surrounding medium. Its main importance is to be able to increase the temperature of the human body locally. This localization can be further increased by using a combination of static and alternating external magnetic fields. For example, if the static field is inhomogeneous and the alternating field is oscillating then the energy transfer and consequently, the heat generation is non-vanishing only where the gradient field is zero which results in superlocalization. Our goal here is to study theoretically and experimentally whether the perpendicular or parallel combination of static and oscillating fields produce a better superlocalization. A considerable polarisation effect in superlocalization for small frequencies and large field strengths which are of great importance in practice is found.
△ Less
Submitted 23 February, 2022; v1 submitted 16 December, 2021;
originally announced December 2021.
-
Ultrahigh nitrogen-vacancy center concentration in diamond
Authors:
S. Kollarics,
F. Simon,
A. Bojtor,
K. Koltai,
G. Klujber,
M. Szieberth,
B. G. Márkus,
D. Beke,
K. Kamarás,
A. Gali,
D. Amirari,
R. Berry,
S. Boucher,
D. Gavryushkin,
G. Jeschke,
J. P. Cleveland,
S. Takahashi,
P. Szirmai,
L. Forró,
E. Emmanouilidou,
R. Singh,
K. Holczer
Abstract:
High concentration of negatively charged nitrogen-vacancy ($\text{NV}^{-}$) centers was created in diamond single crystals containing approximately 100 ppm nitrogen using electron and neutron irradiation and subsequent thermal annealing in a stepwise manner. Continuous wave electron paramagnetic resonance (EPR) was used to determine the transformation efficiency from isolated N atoms to…
▽ More
High concentration of negatively charged nitrogen-vacancy ($\text{NV}^{-}$) centers was created in diamond single crystals containing approximately 100 ppm nitrogen using electron and neutron irradiation and subsequent thermal annealing in a stepwise manner. Continuous wave electron paramagnetic resonance (EPR) was used to determine the transformation efficiency from isolated N atoms to $\text{NV}^{-}$ centers in each production step and its highest value was as high as 17.5 %. Charged vacancies are formed after electron irradiation as shown by EPR spectra, but the thermal annealing restores the sample quality as the defect signal diminishes. We find that about 25 % of the vacancies form NVs during the annealing process. The large $\text{NV}^{-}$ concentration allows to observe orientation dependent spin-relaxation times and also the determination of the hyperfine and quadrupole coupling constants with high precision using electron spin echo (ESE) and electron-nuclear double resonance (ENDOR). We also observed the EPR signal associated with the so-called W16 centers, whose spectroscopic properties might imply a nitrogen dimer-vacancy center for its origin.
△ Less
Submitted 10 December, 2021; v1 submitted 5 October, 2021;
originally announced October 2021.
-
Optical-microwave pump-probe studies of electronic properties in novel materials
Authors:
S. Kollarics,
A. Bojtor,
K. Koltai,
B. G. Márkus,
K. Holczer,
J. Volk,
G. Klujber,
M. Szieberth,
F. Simon
Abstract:
Combined microwave-optical pump-probe methods are emerging to study the quantum state of spin qubit centers and the charge dynamics in semiconductors. A major hindrance is the limited bandwidth of microwave irradiation/detection circuitry which could be overcome with the use of broadband coplanar waveguides (CPW). We present the development and performance characterization of two spectrometers: an…
▽ More
Combined microwave-optical pump-probe methods are emerging to study the quantum state of spin qubit centers and the charge dynamics in semiconductors. A major hindrance is the limited bandwidth of microwave irradiation/detection circuitry which could be overcome with the use of broadband coplanar waveguides (CPW). We present the development and performance characterization of two spectrometers: an optically detected magnetic resonance spectrometer (ODMR) and a microwave detected photoconductivity measurement. In the first method light serves as detection and microwaves excite the investigated medium, while in the second the roles are interchanged. The performance is demonstrated by measuring ODMR maps on the nitrogen-vacancy center in diamond and time resolved photoconductivity in p-doped silicon. The results demonstrate both an efficient coupling of the microwave irradiation to the samples as well as an excellent sensitivity for minute changes in sample conductivity.
△ Less
Submitted 1 October, 2020;
originally announced October 2020.
-
Tuning Conductivity and Spin Dynamics in Few-Layer Graphene via In Situ Potassium Exposure
Authors:
B. G. Márkus,
O. Sági,
S. Kollarics,
K. F. Edelthalhammer,
A. Hirsch,
F. Hauke,
P. Szirmai,
B. Náfrádi,
L. Forró,
F. Simon
Abstract:
Chemical modification, such as intercalation or do** of novel materials is of great importance for exploratory material science and applications in various fields of physics and chemistry. In the present work, we report the systematic intercalation of chemically exfoliated few-layer graphene with potassium while monitoring the sample resistance using microwave conductivity. We find that the cond…
▽ More
Chemical modification, such as intercalation or do** of novel materials is of great importance for exploratory material science and applications in various fields of physics and chemistry. In the present work, we report the systematic intercalation of chemically exfoliated few-layer graphene with potassium while monitoring the sample resistance using microwave conductivity. We find that the conductivity of the samples increases by about an order of magnitude upon potassium exposure. The increased of number of charge carriers deduced from the ESR intensity also reflects this increment. The doped phases exhibit two asymmetric Dysonian lines in ESR, a usual sign of the presence of mobile charge carriers. The width of the broader component increases with the do** steps, however, the narrow components seem to have a constant line width.
△ Less
Submitted 14 July, 2020;
originally announced July 2020.
-
Non-exponential magnetic relaxation in magnetic nanoparticles for hyperthermia
Authors:
I. Gresits,
Gy. Thuroczy,
O. Sagi,
S. Kollarics,
G. Csosz,
B. G. Markus,
N. M. Nemes,
M. Garcia Hernandez,
F. Simon
Abstract:
Magnetic nanoparticle based hyperthermia emerged as a potential tool for treating malignant tumours. The efficiency of the method relies on the knowledge of magnetic properties of the samples; in particular, knowledge of the frequency dependent complex magnetic susceptibility is vital to optimize the irradiation conditions and to provide feedback for material science developments. We study the fre…
▽ More
Magnetic nanoparticle based hyperthermia emerged as a potential tool for treating malignant tumours. The efficiency of the method relies on the knowledge of magnetic properties of the samples; in particular, knowledge of the frequency dependent complex magnetic susceptibility is vital to optimize the irradiation conditions and to provide feedback for material science developments. We study the frequency-dependent magnetic susceptibility of an aqueous ferrite suspension for the first time using non-resonant and resonant radiofrequency reflectometry. We identify the optimal measurement conditions using a standard solenoid coil, which is capable of providing the complex magnetic susceptibility up to 150 MHz. The result matches those obtained from a radiofrequency resonator for a few discrete frequencies. The agreement between the two different methods validates our approach. Surprisingly, the dynamic magnetic susceptibility cannot be explained by an exponential magnetic relaxation behavior even when we consider a particle size-dependent distribution of the relaxation parameter.
△ Less
Submitted 27 January, 2020;
originally announced January 2020.
-
Ultrafast sensing of photoconductivity decay using microwave resonators
Authors:
B. Gyüre-Garami,
B. Blum,
O. Sági,
A. Bojtor,
S. Kollarics,
G. Csősz,
B. G. Márkus,
J. Volk,
F. Simon
Abstract:
Microwave reflectance probed photoconductivity (or $μ$-PCD) measurement represents a contactless and non-invasive method to characterize impurity content in semiconductors. Major drawbacks of the method include a difficult separation of reflectance due to dielectric and conduction effects and that the $μ$-PCD signal is prohibitively weak for highly conducting samples. Both of these limitations cou…
▽ More
Microwave reflectance probed photoconductivity (or $μ$-PCD) measurement represents a contactless and non-invasive method to characterize impurity content in semiconductors. Major drawbacks of the method include a difficult separation of reflectance due to dielectric and conduction effects and that the $μ$-PCD signal is prohibitively weak for highly conducting samples. Both of these limitations could be tackled with the use of microwave resonators due to the well-known sensitivity of resonator parameters to minute changes in the material properties combined with a null measurement. A general misconception is that time resolution of resonator measurements is limited beyond their bandwidth by the readout electronics response time. While it is true for conventional resonator measurements, such as those employing a frequency sweep, we present a time-resolved resonator parameter readout method which overcomes these limitations and allows measurement of complex material parameters and to enhance $μ$-PCD signals with the ultimate time resolution limit being the resonator time constant. This is achieved by detecting the transient response of microwave resonators on the timescale of a few 100 ns \emph{during} the $μ$-PCD decay signal. The method employs a high-stability oscillator working with a fixed frequency which results in a stable and highly accurate measurement.
△ Less
Submitted 4 December, 2019; v1 submitted 30 September, 2019;
originally announced September 2019.
-
Improved alkali intercalation of carbonaceous materials in ammonia solution
Authors:
B. G. Márkus,
S. Kollarics,
P. Szirmai,
B. Náfrádi,
L. Forró,
J. C. Chacón-Torres,
T. Pichler,
F. Simon
Abstract:
Alkali intercalated graphite compounds represent a compelling modification of carbon with significant application potential and various fundamentally important phases. We report on the intercalation of graphite with alkali atoms (Li and K) using liquid ammonia solution as mediating agent. Alkali atoms dissolve well in liquid ammonia which simplifies and speeds up the intercalation process, and it…
▽ More
Alkali intercalated graphite compounds represent a compelling modification of carbon with significant application potential and various fundamentally important phases. We report on the intercalation of graphite with alkali atoms (Li and K) using liquid ammonia solution as mediating agent. Alkali atoms dissolve well in liquid ammonia which simplifies and speeds up the intercalation process, and it also avoids the high temperature formation of alkali carbides. Optical microscopy, Raman, and electron spin resonance spectroscopy attest that the prepared samples are highly and homogeneously intercalated to a level approaching Stage-I intercalation compounds. The method and the synthesis route may serve as a starting point for the various forms of alkali atom intercalated carbon compounds (including carbon nanotubes and graphene), which could be exploited in energy storage and further chemical modifications.
△ Less
Submitted 16 July, 2019;
originally announced July 2019.
-
Improved laser based photoluminescence on single-walled carbon nanotubes
Authors:
S. Kollarics,
J. Palotás,
A. Bojtor,
B. G. Márkus,
P. Rohringer,
T. Pichler,
F. Simon
Abstract:
Photoluminescence (PL) has become a common tool to characterize various properties of single-walled carbon nanotube (SWCNT) chirality distribution and the level of tube individualization in SWCNT samples. Most PL studies employ conventional lamp light sources whose spectral distribution is filtered with a monochromator but this results in a still impure spectrum with a low spectral intensity. Tuna…
▽ More
Photoluminescence (PL) has become a common tool to characterize various properties of single-walled carbon nanotube (SWCNT) chirality distribution and the level of tube individualization in SWCNT samples. Most PL studies employ conventional lamp light sources whose spectral distribution is filtered with a monochromator but this results in a still impure spectrum with a low spectral intensity. Tunable dye lasers offer a tunable light source which cover the desired excitation wavelength range with a high spectral intensity, but their operation is often cumbersome. Here, we present the design and properties of an improved dye-laser system which is based on a Q-switch pump laser. The high peak power of the pump provides an essentially threshold-free lasing of the dye laser which substantially improves the operability. It allows operation with laser dyes such as Rhodamin 110 and Pyridin 1, which are otherwise on the border of operation of our laser. Our system allows to cover the 540-730 nm wavelength range with 4 dyes. In addition, the dye laser output pulses closely follow the properties of the pump this it directly provides a time resolved and tunable laser source. We demonstrate the performance of the system by measuring the photoluminescence map of a HiPco single-walled carbon nanotubes sample.
△ Less
Submitted 3 December, 2019; v1 submitted 20 May, 2019;
originally announced May 2019.
-
A highly accurate determination of absorbed power during nanomagnetic hyperthermia
Authors:
I. Gresits,
Gy. Thuróczy,
O. Sági,
I. Homolya,
G. Bagaméry,
D. Gajári,
M. Babos,
P. Major,
B. G. Márkus,
F. Simon
Abstract:
Absorbed power of nanoparticles during magnetic hyperthermia can be well determined from changes in the quality factor ($Q$ factor) of a resonator, in which the radiofrequency (RF) absorbent is placed. We present an order of magnitude improvement in the $Q$ factor measurement accuracy over conventional methods by studying the switch-on and off transient signals of the resonators. A nuclear magneti…
▽ More
Absorbed power of nanoparticles during magnetic hyperthermia can be well determined from changes in the quality factor ($Q$ factor) of a resonator, in which the radiofrequency (RF) absorbent is placed. We present an order of magnitude improvement in the $Q$ factor measurement accuracy over conventional methods by studying the switch-on and off transient signals of the resonators. A nuclear magnetic resonance (NMR) console is ideally suited to acquire the transient signals and it also allows to employ the so-called pulse phase-cycling to remove transient artifacts. The improved determination of the absorbed power is demonstrated on various resonators in the 1-30 MHz range including standard solenoids and also a birdcage resonator. This leads to the possibility to detect minute amounts of ferrite nanoparticles which are embedded in the body and also the amount of the absorbed power. We demonstrate this capability on a phantom study, where the exact location of an embedded ferrite is clearly detected.
△ Less
Submitted 4 April, 2019;
originally announced April 2019.
-
Anomalous specific heat peak of BaVS$_3$ at 69 K explained by enhanced electron scattering upon ion relocation
Authors:
Ferenc Márkus,
Bence G. Márkus
Abstract:
The present study deals with the anomalous heat capacity peak and thermal conductivity of BaVS$_3$ near the metal-insulator transition present at $69$ K. The transition is related to a structural transition from an orthorhombic to monoclinic phase. Heat capacity measurements at this temperature exhibit a significant and relatively broad peak, which is also sample dependent. The present study calcu…
▽ More
The present study deals with the anomalous heat capacity peak and thermal conductivity of BaVS$_3$ near the metal-insulator transition present at $69$ K. The transition is related to a structural transition from an orthorhombic to monoclinic phase. Heat capacity measurements at this temperature exhibit a significant and relatively broad peak, which is also sample dependent. The present study calculates the entropy increase during the structural transition and we show that the additional entropy is caused by enhanced electron scattering as a result of the structural reorientation of the nuclei. Within the model it is possible to explain quantitatively the observed peak alike structure in the heat capacity and in heat conductivity.
△ Less
Submitted 25 March, 2019;
originally announced March 2019.
-
Incidence of multilayers in chemically exfoliated graphene
Authors:
P. Szirmai,
B. G. Márkus,
J. C. Chacón-Torres,
P. Eckerlein,
K. Edelthalhammer,
J. M. Englert,
U. Mundloch,
A. Hirsch,
F. Hauke,
B. Náfrádi,
L. Forró,
C. Kramberger,
T. Pichler,
F. Simon
Abstract:
An efficient route to synthesize macroscopic amounts of graphene is highly desired and a bulk characterization of such samples, in terms of the number of layers, is equally important. We present a Raman spectroscopy-based method to determine the distribution of the number of graphene layers in chemically exfoliated graphene. We utilize a controlled vapor-phase potassium intercalation technique and…
▽ More
An efficient route to synthesize macroscopic amounts of graphene is highly desired and a bulk characterization of such samples, in terms of the number of layers, is equally important. We present a Raman spectroscopy-based method to determine the distribution of the number of graphene layers in chemically exfoliated graphene. We utilize a controlled vapor-phase potassium intercalation technique and identify a lightly doped stage, where the Raman modes of undoped and doped few-layer graphene flakes coexist. The spectra can be unambiguously distinguished from alkali doped graphite, and a modeling with the distribution of the layers yields an upper limit of flake thickness of five layers with a significant single-layer graphene content. Complementary statistical AFM measurements on individual few-layer graphene flakes find a consistent distribution of the layer numbers.
△ Less
Submitted 17 January, 2019; v1 submitted 24 July, 2018;
originally announced July 2018.
-
Electronic properties of air-sensitive nanomaterials probed with microwave impedance measurements
Authors:
B. G. Márkus,
G. Csősz,
O. Sági,
B. Gyüre-Garami,
V. Lloret,
S. Wild,
G. Abellán,
N. M. Nemes,
G. Klupp,
K. Kamarás,
A. Hirsch,
F. Hauke,
F. Simon
Abstract:
Characterization of electronic properties of novel materials is of great importance for exploratory materials development and also for the discovery of new correlated phases. As several novel compounds are available in powder form only, contactless methods, which also work on air sensitive samples, are higly desired. We present that the microwave cavity perturbation technique is a versatile tool t…
▽ More
Characterization of electronic properties of novel materials is of great importance for exploratory materials development and also for the discovery of new correlated phases. As several novel compounds are available in powder form only, contactless methods, which also work on air sensitive samples, are higly desired. We present that the microwave cavity perturbation technique is a versatile tool to study conductivity in such systems. The examples include studies on semiconducting-metallic crossover in carbon nanotubes upon alkali do**, study of vortex motion in the K$_3$C$_{60}$ superconductor, and the characterization of various alkali atom doped phases of black phosphorus.
△ Less
Submitted 21 August, 2018; v1 submitted 11 June, 2018;
originally announced June 2018.
-
Heating causes non-linear microwave absorption anomaly in single wall carbon nanotubes
Authors:
B. G. Márkus,
B. Gyüre-Garami,
O. Sági,
G. Csősz,
F. Márkus,
F. Simon
Abstract:
Microwave impedance measurements indicate a non-linear absorption anomaly in single wall carbon nanotubes at low temperatures (below $20$ K). We investigate the nature of the anomaly using a time resolved microwave impedance measurement technique. It proves that the anomaly has an extremely slow, a few hundred second long dynamics. This strongly suggests that the anomaly is not caused by an intrin…
▽ More
Microwave impedance measurements indicate a non-linear absorption anomaly in single wall carbon nanotubes at low temperatures (below $20$ K). We investigate the nature of the anomaly using a time resolved microwave impedance measurement technique. It proves that the anomaly has an extremely slow, a few hundred second long dynamics. This strongly suggests that the anomaly is not caused by an intrinsic electronic effect and that it is rather due to a slow heat exchange between the sample and the environment.
△ Less
Submitted 26 June, 2018; v1 submitted 11 June, 2018;
originally announced June 2018.
-
A highly accurate measurement of resonator $Q$-factor and resonance frequency
Authors:
B. Gyüre-Garami,
O. Sági,
B. G. Márkus,
F. Simon
Abstract:
The microwave cavity perturbation method is often used to determine material parameters (electric permittivity and magnetic permeability) at high frequencies and it relies on measurement of the resonator parameters. We present a method to determine the $Q$-factor and resonance frequency of microwave resonators which is conceptually simple but provides a sensitivity for these parameters which overc…
▽ More
The microwave cavity perturbation method is often used to determine material parameters (electric permittivity and magnetic permeability) at high frequencies and it relies on measurement of the resonator parameters. We present a method to determine the $Q$-factor and resonance frequency of microwave resonators which is conceptually simple but provides a sensitivity for these parameters which overcomes those of existing methods by an order of magnitude. The microwave resonator is placed in a feedback resonator setup, where the output of an amplifier is connected to its own input with the resonator as a band pass filter. After reaching steady-state oscillation, the feedback circuit is disrupted by a fast microwave switch and the transient signal, which emanates from the resonator, is detected using down-conversion. The Fourier transform of the resulting time-dependent signal yields directly the resonance profile of the resonator. Albeit the method is highly accurate, this comes with a conceptual simplicity, ease of implementation and lower circuit cost. We compare existing methods for this type of measurement to explain the sensitivity of the present technique and we also make a prediction for the ultimate sensitivity for the resonator $Q$ and $f_0$ determination.
△ Less
Submitted 1 August, 2018; v1 submitted 29 May, 2018;
originally announced May 2018.
-
Electronic and magnetic properties of black phosphorus
Authors:
Bence G. Márkus,
Ferenc Simon,
Károly Nagy,
Titusz Fehér,
Stefan Wild,
Gonzalo Abellán,
Julio C. Chacón-Torres,
Andreas Hirsch,
Frank Hauke
Abstract:
Black phosphorus has emerged as the next member in the graphene inspired two-dimensional materials family. Its electronic and magnetic properties are studied herein using electron and nuclear magnetic resonance techniques (ESR and NMR) and microwave conductivity measurement. The latter is a unique technique to study conductivity on air sensitive samples. The ESR study indicates the absence of free…
▽ More
Black phosphorus has emerged as the next member in the graphene inspired two-dimensional materials family. Its electronic and magnetic properties are studied herein using electron and nuclear magnetic resonance techniques (ESR and NMR) and microwave conductivity measurement. The latter is a unique technique to study conductivity on air sensitive samples. The ESR study indicates the absence of free charge carriers and no sign of paramagnetic defects are found. $^{31}$P NMR shows the presence of a characteristic Pake doublet structure due to the interaction between $I = 1/2$ nuclei. Microwave conductivity shows, in accordance with the ESR results, that black phosphorus behaves as a semiconductor and we identify extrinsic and intrinsic charge carrier contributions to the conductivity and extracted the sizes of the gaps. ESR measurement also yields that bP might find applications as a microwave absorbent.
△ Less
Submitted 3 May, 2018;
originally announced May 2018.
-
Giant microwave absorption in fine powders of superconductors
Authors:
G. Csősz,
B. G. Márkus,
A. Jánossy,
N. M. Nemes,
F. Murányi,
G. Klupp,
K. Kamarás,
V. G. Kogan,
S. L. Bud'ko,
P. C. Canfield,
F. Simon
Abstract:
Enhanced microwave absorption, larger than that in the normal state, is observed in fine grains of type-II superconductors (MgB$_2$ and K$_3$C$_{60}$) for magnetic fields as small as a few $\%$ of the upper critical field. The effect is predicted by the theory of vortex motion in type-II superconductors, however its direct observation has been elusive due to skin-depth limitations; conventional mi…
▽ More
Enhanced microwave absorption, larger than that in the normal state, is observed in fine grains of type-II superconductors (MgB$_2$ and K$_3$C$_{60}$) for magnetic fields as small as a few $\%$ of the upper critical field. The effect is predicted by the theory of vortex motion in type-II superconductors, however its direct observation has been elusive due to skin-depth limitations; conventional microwave absorption studies employ larger samples where the microwave magnetic field exclusion significantly lowers the absorption. We show that the enhancement is observable in grains smaller than the penetration depth. A quantitative analysis on K$_3$C$_{60}$ in the framework of the Coffey--Clem (CC) theory explains well the temperature dependence of the microwave absorption and also allows to determine the vortex pinning force constant.
△ Less
Submitted 31 July, 2018; v1 submitted 22 April, 2018;
originally announced April 2018.
-
Non-calorimetric determination of absorbed power during magnetic nanoparticle based hyperthermia
Authors:
I. Gresits,
Gy. Thuróczy,
O. Sági,
B. Gyüre-Garami,
B. G. Márkus,
F. Simon
Abstract:
Nanomagnetic hyperthermia (NMH) is intensively studied with the prospect of cancer therapy. A major challenge is to determine the dissipated power during in vivo conditions and conventional methods are either invasive or inaccurate. We present a non-calorimetric method which yields the heat absorbed during hyperthermia: it is based on accurately measuring the quality factor change of a resonant ra…
▽ More
Nanomagnetic hyperthermia (NMH) is intensively studied with the prospect of cancer therapy. A major challenge is to determine the dissipated power during in vivo conditions and conventional methods are either invasive or inaccurate. We present a non-calorimetric method which yields the heat absorbed during hyperthermia: it is based on accurately measuring the quality factor change of a resonant radio frequency circuit which is employed for the irradiation. The approach provides the absorbed power in real-time, without the need to monitor the sample temperature as a function of time. As such, it is free from the problems caused by the non-adiabatic heating conditions of the usual calorimetry. We validate the method by comparing the dissipated power with a conventional calorimetric measurement. We present the validation for two types of resonators with very different filling factors: a solenoid and a so-called birdcage coil. The latter is a volume coil, which is generally used in magnetic resonance imaging (MRI) under in vivo condition. The presented method therefore allows to effectively combine MRI and thermotherapy and is thus readily adaptable to existing imaging hardware.
△ Less
Submitted 25 July, 2018; v1 submitted 24 March, 2018;
originally announced March 2018.
-
Doped carbon nanotubes as a model system of biased graphene
Authors:
P. Szirmai,
B. G. Márkus,
B. Dóra,
G. Fábián,
J. Koltai,
V. Zólyomi,
J. Kürti,
B. Náfrádi,
L. Forró,
T. Pichler,
F. Simon
Abstract:
Albeit difficult to access experimentally, the density of states (DOS) is a key parameter in solid state systems which governs several important phenomena including transport, magnetism, thermal, and thermoelectric properties. We study DOS in an ensemble of potassium intercalated single-wall carbon nanotubes (SWCNT) and show using electron spin resonance spectroscopy that a sizeable number of elec…
▽ More
Albeit difficult to access experimentally, the density of states (DOS) is a key parameter in solid state systems which governs several important phenomena including transport, magnetism, thermal, and thermoelectric properties. We study DOS in an ensemble of potassium intercalated single-wall carbon nanotubes (SWCNT) and show using electron spin resonance spectroscopy that a sizeable number of electron states are present, which gives rise to a Fermi-liquid behavior in this material. A comparison between theoretical and the experimental DOS indicates that it does not display significant correlation effects, even though the pristine nanotube material shows a Luttinger-liquid behavior. We argue that the carbon nanotube ensemble essentially maps out the whole Brillouin zone of graphene thus it acts as a model system of biased graphene.
△ Less
Submitted 17 August, 2016;
originally announced August 2016.
-
Anisotropic Elliott-Yafet Theory and Application to KC$_8$ Potassium Intercalated Graphite
Authors:
Bence G. Márkus,
Lénárd Szolnoki,
Dávid Iván,
Balázs Dóra,
Péter Szirmai,
Bálint Náfrádi,
László Forró,
Ferenc Simon
Abstract:
We report Electron Spin Resonance (ESR) measurements on stage-I potassium intercalated graphite (KC$_8$). Angular dependent measurements show that the spin-lattice relaxation time is longer when the magnetic field is perpendicular to the graphene layer as compared to when the magnetic field is in the plane. This anisotropy is analyzed in the framework of the Elliott-Yafet theory of spin-relaxation…
▽ More
We report Electron Spin Resonance (ESR) measurements on stage-I potassium intercalated graphite (KC$_8$). Angular dependent measurements show that the spin-lattice relaxation time is longer when the magnetic field is perpendicular to the graphene layer as compared to when the magnetic field is in the plane. This anisotropy is analyzed in the framework of the Elliott-Yafet theory of spin-relaxation in metals. The analysis considers an anisotropic spin-orbit Hamiltonian and the first order perturbative treatment of Elliott is reproduced for this model Hamiltonian. The result provides an experimental input for the first-principles theories of spin-orbit interaction in layered carbon and thus to a better understanding of spin-relaxation phenomena in graphene and in other layered materials as well.
△ Less
Submitted 17 August, 2016;
originally announced August 2016.
-
Electronic and ionic conductivities in superionic Li$_4$C$_{60}$
Authors:
D. Quintavalle,
B. G. Márkus,
A. Jánossy,
F. Simon,
G. Klupp,
M. A. Győri,
K. Kamarás,
G. Magnani,
D. Pontiroli,
M. Riccò
Abstract:
The $10$ GHz microwave conductivity, $σ(T)$ and high field, $222$ GHz electron spin resonance (HF-ESR) of Li$_4$C$_{60}$ fulleride is measured in a wide temperature range. We suggest that the majority of ESR active sites and at least some of the charge carriers for $σ(T)$ are electrons bound to a small concentration of surplus or vacancy ions in the polymer phase. Both $σ(T)$ and the ESR line shap…
▽ More
The $10$ GHz microwave conductivity, $σ(T)$ and high field, $222$ GHz electron spin resonance (HF-ESR) of Li$_4$C$_{60}$ fulleride is measured in a wide temperature range. We suggest that the majority of ESR active sites and at least some of the charge carriers for $σ(T)$ are electrons bound to a small concentration of surplus or vacancy ions in the polymer phase. Both $σ(T)$ and the ESR line shape depend on ionic motion. A change of the activation energy of $σ(T)$ at $125$ K coincides with the onset of the ionic DC conductivity. The ESR line shape is determined mainly by Li ionic motion within octahedral voids below $150$ K. At higher temperatures, fluctuations due to ionic diffusion change the environment of defects from axial to effectively isotropic on the ESR time scale. $σ(T)$ data up to $700$ K through the depolymerization transition confirm that the monomeric phase of Li$_4$C$_{60}$ is a metal.
△ Less
Submitted 4 March, 2016;
originally announced March 2016.
-
Quantum Particle Motion in Absorbing Harmonic Trap
Authors:
B. G. Márkus,
F. Márkus
Abstract:
The motivation of this work is to get an additional insight into the irreversible energy dissipation on the quantum level. The presented examination procedure is based on the Feynman path integral method that is applied and widened towards the calculation of the kernel of a quantum mechanical damped oscillator. Here, it is shown that the energy loss of the oscillator can be generated by the introd…
▽ More
The motivation of this work is to get an additional insight into the irreversible energy dissipation on the quantum level. The presented examination procedure is based on the Feynman path integral method that is applied and widened towards the calculation of the kernel of a quantum mechanical damped oscillator. Here, it is shown that the energy loss of the oscillator can be generated by the introduced harmonic complex potential. The related damped wave function, however, does not pertain to the probability meaning as it is usual in the case of complex absorbing potentials. This decrease of the wave function is evaluated, moreover, the energy dissipation and the measure the irreversibility are expressed.
△ Less
Submitted 26 May, 2015;
originally announced May 2015.
-
A time domain based method for the accurate measurement of Q-factor and resonance frequency of microwave resonators
Authors:
B. Gyüre,
B. G. Márkus,
B. Bernáth,
F. Murányi,
F. Simon
Abstract:
We present a novel method to determine the resonant frequency and quality factor of microwave resonators which is faster, more stable, and conceptually simpler than the yet existing techniques. The microwave resonator is irradiated at a frequency away from its resonance. It then emits an exponentially decaying radiation at its eigen-frequency when the excitation is rapidly switched off. The emissi…
▽ More
We present a novel method to determine the resonant frequency and quality factor of microwave resonators which is faster, more stable, and conceptually simpler than the yet existing techniques. The microwave resonator is irradiated at a frequency away from its resonance. It then emits an exponentially decaying radiation at its eigen-frequency when the excitation is rapidly switched off. The emission is down-converted with a microwave mixer, digitized and its Fourier transformation (FT) directly yields the resonance curve in a single shot. Being an FT based method, this technique possesses the Fellgett (multiplex) and Connes (accuracy) advantages and it conceptually mimics that of pulsed nuclear magnetic resonance. We also establish a novel benchmark to compare accuracy of the different approaches of microwave resonator measurements. This shows that the present method have similar accuracy to the existing ones.
△ Less
Submitted 26 May, 2015;
originally announced May 2015.
-
Transport, Magnetic and Vibrational Properties of Chemically Exfoliated Few Layer Graphene
Authors:
Bence G. Márkus,
Ferenc Simon,
Julio C. Chacón-Torres,
Stephanie Reich,
Péter Szirmai,
Bálint Náfrádi,
László Forró,
Thomas Pichler,
Philipp Vecera,
Frank Hauke,
Andreas Hirsch
Abstract:
We study the vibrational, magnetic and transport properties of Few Layer Graphene (FLG) using Raman and electron spin resonance spectroscopy and microwave conductivity measurements. FLG samples were produced using wet chemical exfoliation with different post-processing, namely ultrasound treatment, shear mixing, and magnetic stirring. Raman spectroscopy shows a low intensity D mode which attests a…
▽ More
We study the vibrational, magnetic and transport properties of Few Layer Graphene (FLG) using Raman and electron spin resonance spectroscopy and microwave conductivity measurements. FLG samples were produced using wet chemical exfoliation with different post-processing, namely ultrasound treatment, shear mixing, and magnetic stirring. Raman spectroscopy shows a low intensity D mode which attests a high sample quality. The G mode is present at $1580$ cm$^{-1}$ as expected for graphene. The 2D mode consists of 2 components with varying intensities among the different samples. This is assigned to the presence of single and few layer graphene in the samples. ESR spectroscopy shows a main line in all types of materials with a width of about $1$ mT and and a $g$-factor in the range of $2.005-2.010$. Paramagnetic defect centers with a uniaxial $g$-factor anisotropy are identified, which shows that these are related to the local sp$^2$ bonds of the material. All kinds of investigated FLGs have a temperature dependent resistance which is compatible with a small gap semiconductor. The difference in resistance is related to the different grain size of the samples.
△ Less
Submitted 26 May, 2015;
originally announced May 2015.
