-
Experiments conducted in the burning plasma regime with inertial fusion implosions
Authors:
J. S. Ross,
J. E. Ralph,
A. B. Zylstra,
A. L. Kritcher,
H. F. Robey,
C. V. Young,
O. A. Hurricane,
D. A. Callahan,
K. L. Baker,
D. T. Casey,
T. Doeppner,
L. Divol,
M. Hohenberger,
S. Le Pape,
A. Pak,
P. K. Patel,
R. Tommasini,
S. J. Ali,
P. A. Amendt,
L. J. Atherton,
B. Bachmann,
D. Bailey,
L. R. Benedetti,
L. Berzak Hopkins,
R. Betti
, et al. (127 additional authors not shown)
Abstract:
An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into…
▽ More
An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into x-ray radiation which in turn drives the DT fuel filled capsule causing it to implode. Previous experiments reported DT fuel gain exceeding unity [O.A. Hurricane et al., Nature 506, 343 (2014)] and then exceeding the kinetic energy of the imploding fuel [S. Le Pape et al., Phys. Rev. Lett. 120, 245003 (2018)]. We report on recent experiments that have achieved record fusion neutron yields on NIF, greater than 100 kJ with momentary fusion powers exceeding 1PW, and have for the first time entered the burning plasma regime where fusion alpha-heating of the fuel exceeds the energy delivered to the fuel via compression. This was accomplished by increasing the size of the high-density carbon (HDC) capsule, increasing energy coupling, while controlling symmetry and implosion design parameters. Two tactics were successful in controlling the radiation flux symmetry and therefore the implosion symmetry: transferring energy between laser cones via plasma waves, and changing the shape of the hohlraum. In conducting these experiments, we controlled for known sources of degradation. Herein we show how these experiments were performed to produce record performance, and demonstrate the data fidelity leading us to conclude that these shots have entered the burning plasma regime.
△ Less
Submitted 8 November, 2021;
originally announced November 2021.
-
Strain-Tuning of the Optical Properties of Semiconductor Nanomaterials by Integration onto Piezoelectric Actuators
Authors:
Javier Martin-Sanchez,
Rinaldo Trotta,
Antonio Mariscal,
Rosalia Serna,
Giovanni Piredda,
Sandra Stroj,
Johannes Edlinger,
Christian Schimpf,
Johannes Aberl,
Thomas Lettner,
Johannes Wildmann,
Huiying Huang,
Xueyong Yuan,
Dorian Ziss,
Julian Stangl,
Armando Rastelli
Abstract:
The tailoring of the physical properties of semiconductor nanomaterials by strain has been gaining increasing attention over the last years for a wide range of applications such as electronics, optoelectronics and photonics. The ability to introduce deliberate strain fields with controlled magnitude and in a reversible manner is essential for fundamental studies of novel materials and may lead to…
▽ More
The tailoring of the physical properties of semiconductor nanomaterials by strain has been gaining increasing attention over the last years for a wide range of applications such as electronics, optoelectronics and photonics. The ability to introduce deliberate strain fields with controlled magnitude and in a reversible manner is essential for fundamental studies of novel materials and may lead to the realization of advanced multi-functional devices. A prominent approach consists in the integration of active nanomaterials, in thin epitaxial films or embedded within carrier nanomembranes, onto Pb(Mg1/3Nb2/3)O3-PbTiO3-based piezoelectric actuators, which convert electrical signals into mechanical deformation (strain). In this review, we mainly focus on recent advances in strain-tunable properties of self-assembled InAs quantum dots embedded in semiconductor nanomembranes and photonic structures. Additionally, recent works on other nanomaterials like rare-earth and metal-ion doped thin films, graphene and MoS2 or WSe2 semiconductor two-dimensional materials are also reviewed. For the sake of completeness, a comprehensive comparison between different procedures employed throughout the literature to fabricate such hybrid piezoelectric-semiconductor devices is presented. Very recently, a novel class of micro-machined piezoelectric actuators have been demonstrated for a full control of in-plane stress fields in nanomembranes, which enables producing energy-tunable sources of polarization-entangled photons in arbitrary quantum dots. Future research directions and prospects are discussed.
△ Less
Submitted 19 October, 2017;
originally announced October 2017.
-
Highly oriented EuO nanocrystalline films via reduction process - NIR optical response
Authors:
Antonio Mariscal,
Adrián Quesada,
Aitana Tarazaga Martín-Luengo,
Miguel Ángel García,
Alberta Bonanni,
José Fernández,
Rosalia Serna
Abstract:
Nanocrystalline textured EuO thin films are prepared by an oxygen loss process from a pure Eu2O3 bulk ceramic target through pulsed laser deposition in vacuum at room temperature. X-ray diffraction spectra evidence a well-defined diffraction peak corresponding to the EuO phase textured along the (110) direction. Analysis of the XRD peak profile indicates that the films are nanocrystalline (average…
▽ More
Nanocrystalline textured EuO thin films are prepared by an oxygen loss process from a pure Eu2O3 bulk ceramic target through pulsed laser deposition in vacuum at room temperature. X-ray diffraction spectra evidence a well-defined diffraction peak corresponding to the EuO phase textured along the (110) direction. Analysis of the XRD peak profile indicates that the films are nanocrystalline (average crystallite size of 11 nm) with a compressive residual strain. The formation of stoichiometric EuO is further confirmed by a strong signal from Eu2+ in the X-ray photoelectron spectra. The complex refractive index in the near infrared has been determined by spectroscopic ellipsometry and shows that the EuO films have a high transparency (k < 10-3) and a refractive index of 2.1. A band-gap shift of 0.25 eV is found with respect to the EuO bulk. These films, deposited by an accessible and efficient method, open a new route to produce EuO films with optical quality, suitable for NIR optoelectronic components.
△ Less
Submitted 31 October, 2018; v1 submitted 26 June, 2017;
originally announced June 2017.
-
Effects of Dielectric Stoichiometry on the Photoluminescence Properties of Encapsulated WSe2 Monolayers
Authors:
Javier Martín-Sánchez,
Antonio Mariscal,
Marta De Luca,
Aitana Tarazaga Martín-Luengo,
Georg Gramse,
Alma Halilovic,
Rosalía Serna,
Alberta Bonanni,
Ilaria Zardo,
Rinaldo Trotta,
Armando Rastelli
Abstract:
Two-dimensional transition-metal-dichalcogenide semiconductors have emerged as promising candidates for optoelectronic devices with unprecedented properties and ultra-compact performances. However atomically thin materials are highly sensitive to surrounding dielectric media, which imposes severe limitations to their practical applicability. Hence for their suitable integration into devices, the d…
▽ More
Two-dimensional transition-metal-dichalcogenide semiconductors have emerged as promising candidates for optoelectronic devices with unprecedented properties and ultra-compact performances. However atomically thin materials are highly sensitive to surrounding dielectric media, which imposes severe limitations to their practical applicability. Hence for their suitable integration into devices, the development of reliable encapsulation procedures that preserve their physical properties are required. Here, the excitonic photoluminescence of WSe2 monolayer flakes is assessed, at room temperature and 10 K, on mechanically exfoliated flakes encapsulated with SiOx and AlxOy layers employing chemical and physical deposition techniques. Conformal flakes coating on untreated - non-functionalized - flakes is successfully demonstrated by all the techniques except for atomic layer deposition, where a cluster-like oxide coating is observed. No significant compositional or strain state changes in the flakes are detected upon encapsulation by any of the techniques. Remarkably, our results evidence that the flakes' optical emission is strongly influenced by the quality of the encapsulating oxide - stoichiometry -. When the encapsulation is carried out with slightly sub-stoichiometric oxides two remarkable phenomena are observed. First, there is a clear electrical do** of the monolayers that is revealed through a dominant trion - charged exciton - room-temperature photoluminescence. Second, a strong decrease of the monolayers optical emission is measured attributed to non-radiative recombination processes and/or carriers transfer from the flake to the oxide. Power- and temperature-dependent photoluminescence measurements further confirm that stoichiometric oxides obtained by physical deposition lead to a successful encapsulation.
△ Less
Submitted 17 April, 2017; v1 submitted 17 March, 2017;
originally announced March 2017.
