-
Ab initio elasticity at finite temperature and stress in ferroelectrics
Authors:
Mark A. Mathis,
Chris A. Marianetti
Abstract:
Computing the temperature and stress dependence of the full elastic constant tensor from first-principles in non-cubic materials remains a challenging problem. Here we circumvent the aforementioned challenge via the generalized quasiharmonic approximation in conjunction with the irreducible derivative approach for computing strain dependent phonons using finite difference, explicitly including dip…
▽ More
Computing the temperature and stress dependence of the full elastic constant tensor from first-principles in non-cubic materials remains a challenging problem. Here we circumvent the aforementioned challenge via the generalized quasiharmonic approximation in conjunction with the irreducible derivative approach for computing strain dependent phonons using finite difference, explicitly including dipole-quadrupole contributions. We showcase this approach in ferroelectric PbTiO$_3$ using density functional theory, computing all independent elastic constants and piezoelectric strain coefficients at finite temperature and stress. There is good agreement between the quasiharmonic approximation and the experimental lattice parameters close to 0 K. However, the quasiharmonic approximation overestimates the temperature dependence of the lattice parameters and elastic constant tensor, demonstrating that a higher level of strain dependent anharmonic vibrational theory is needed.
△ Less
Submitted 29 February, 2024;
originally announced February 2024.
-
Benchmarking phonon anharmonicity in machine learning interatomic potentials
Authors:
Sasaank Bandi,
Chao Jiang,
Chris A. Marianetti
Abstract:
Machine learning approaches have recently emerged as powerful tools to probe structure-property relationships in crystals and molecules. Specifically, Machine learning interatomic potentials (MLIP) can accurately reproduce first-principles data at a cost similar to that of conventional interatomic potential approaches. While MLIP have been extensively tested across various classes of materials and…
▽ More
Machine learning approaches have recently emerged as powerful tools to probe structure-property relationships in crystals and molecules. Specifically, Machine learning interatomic potentials (MLIP) can accurately reproduce first-principles data at a cost similar to that of conventional interatomic potential approaches. While MLIP have been extensively tested across various classes of materials and molecules, a clear characterization of the anharmonic terms encoded in the MLIP is lacking. Here, we benchmark popular MLIP using the anharmonic vibrational Hamiltonian of ThO$_2$ in the fluorite crystal structure. This anharmonic Hamiltonian was constructed from density functional theory (DFT) using our highly accurate and efficient irreducible derivative methods, and then used to generate molecular dynamics trajectories. This data set was used to train three classes of MLIP: Gaussian Approximation Potentials, Artificial Neural Networks (ANN), and Graph Neural Networks (GNN). The results were assessed by directly comparing phonons and their interactions, as well as phonon linewidths, phonon lineshifts, and thermal conductivity. The models were also trained on a DFT molecular dynamics dataset, demonstrating good agreement up to fifth-order for the ANN and GNN. Our analysis demonstrates that MLIP have great potential for accurately characterizing anharmonicity in materials systems at a fraction of the cost of conventional first principles-based approaches.
△ Less
Submitted 29 February, 2024;
originally announced February 2024.
-
Phonon thermal transport in UO$_2$ via self-consistent perturbation theory
Authors:
Shuxiang Zhou,
Enda Xiao,
Hao Ma,
Krzysztof Gofryk,
Chao Jiang,
Michael E. Manley,
David H. Hurley,
Chris A. Marianetti
Abstract:
Computing thermal transport from first-principles in UO$_2$ is complicated due to the challenges associated with Mott physics. Here we use irreducible derivative approaches to compute the cubic and quartic phonon interactions in UO$_2$ from first-principles, and we perform enhanced thermal transport computations by evaluating the phonon Green's function via self-consistent diagrammatic perturbatio…
▽ More
Computing thermal transport from first-principles in UO$_2$ is complicated due to the challenges associated with Mott physics. Here we use irreducible derivative approaches to compute the cubic and quartic phonon interactions in UO$_2$ from first-principles, and we perform enhanced thermal transport computations by evaluating the phonon Green's function via self-consistent diagrammatic perturbation theory. Our predicted phonon lifetimes at $T=600$ K agree well with our inelastic neutron scattering measurements across the entire Brillouin zone, and our thermal conductivity predictions agree well with previous measurements. Both the changes due to thermal expansion and self-consistent contributions are nontrivial at high temperatures, though the effects tend to cancel, and interband transitions yield a substantial contribution.
△ Less
Submitted 29 February, 2024; v1 submitted 13 October, 2023;
originally announced October 2023.
-
First-principles determination of the phonon-point defect scattering and thermal transport due to fission products in ThO2
Authors:
Linu Malakkal,
Ankita Katre,
Shuxiang Zhou,
Chao Jiang,
David H. Hurley,
Chris A. Marianetti,
Marat Khafizov
Abstract:
This work presents the first principles calculations of the lattice thermal conductivity degradation due to point defects in thorium dioxide using an alternative solution of the Pierels-Boltzmann transport equation. We have used the non-perturbative Green's function methodology to compute the phonon point defect scattering rates that consider the local distortion around the point defect, including…
▽ More
This work presents the first principles calculations of the lattice thermal conductivity degradation due to point defects in thorium dioxide using an alternative solution of the Pierels-Boltzmann transport equation. We have used the non-perturbative Green's function methodology to compute the phonon point defect scattering rates that consider the local distortion around the point defect, including the mass difference changes, interatomic force constants and structural relaxation near the point defects. The point defects considered in the work include the vacancy of thorium and oxygen, substitution of helium, krypton, zirconium, iodine, xenon, in the thorium site, and the three different configuration of the Schottky defects. The results of the phonon-defect scattering rate reveals that among the considered intrinsic defects, the thorium vacancy and helium substitution in the thorium site scatter the phonon most due to substantial changes in the force constant and structural distortions. The scattering of phonons due to the substitutional defects unveils that the zirconium atom scatters phonons the least, followed by xenon, iodine, krypton, and helium. This is contrary to the intuition that the scattering strength follows HeTh > KrTh > ZrTh > ITh > XeTh based on the mass difference. This striking difference in the zirconium phonon scattering is due to the local chemical environment changes. Zirconium is an electropositive element with valency similar to thorium and, therefore, can bond with the oxygen atoms, thus creating less force constant variance compared to iodine, an electronegative element, noble gas helium, xenon, and krypton. These results can serve as the benchmark for the analytical models and help the engineering-scale modeling effort for nuclear design.
△ Less
Submitted 28 January, 2024; v1 submitted 16 August, 2023;
originally announced August 2023.
-
A gauge constrained algorithm of VDAT at $\mathcal{N}=3$ for the multi-orbital Hubbard model
Authors:
Zhengqian Cheng,
Chris A. Marianetti
Abstract:
The recently developed variational discrete action theory (VDAT) provides a systematic variational approach to the ground state of the quantum many-body problem, where the quality of the solution is controlled by an integer $\mathcal{N}$, and increasing $\mathcal{N}$ monotonically approaches the exact solution. VDAT can be exactly evaluated in the $d=\infty$ multi-orbital Hubbard model using the s…
▽ More
The recently developed variational discrete action theory (VDAT) provides a systematic variational approach to the ground state of the quantum many-body problem, where the quality of the solution is controlled by an integer $\mathcal{N}$, and increasing $\mathcal{N}$ monotonically approaches the exact solution. VDAT can be exactly evaluated in the $d=\infty$ multi-orbital Hubbard model using the self-consistent canonical discrete action theory (SCDA), which requires a self-consistency condition for the integer time Green's functions. Previous work demonstrates that $\mathcal{N}=3$ accurately captures multi-orbital Mott/Hund physics at a cost similar to the Gutzwiller approximation. Here we employ a gauge constraint to automatically satisfy the self-consistency condition of the SCDA at $\mathcal{N}=3$, yielding an even more efficient algorithm with enhanced numerical stability. We derive closed form expressions of the gauge constrained algorithm for the multi-orbital Hubbard model with general density-density interactions, allowing VDAT at $\mathcal{N}=3$ to be straightforwardly applied to the seven orbital Hubbard model. We present results and a performance analysis using $\mathcal{N}=2$ and $\mathcal{N}=3$ for the $\textrm{SU}(2\textrm{N}_{\textrm{orb}})$ Hubbard model in $d=\infty$ with $\textrm{N}_{\textrm{orb}}=2-8$, and compare to numerically exact dynamical mean-field theory solutions where available. The developments in this work will greatly facilitate the application of VDAT at $\mathcal{N}=3$ to strongly correlated electron materials.
△ Less
Submitted 27 June, 2023; v1 submitted 27 April, 2023;
originally announced April 2023.
-
Magnetism and Metallicity in Moiré Transition Metal Dichalcogenides
Authors:
Patrick Tscheppe,
Jiawei Zang,
Marcel Klett,
Seher Karakuzu,
Armelle Celarier,
Zhengqian Cheng,
Chris A. Marianetti,
Thomas A. Maier,
Michel Ferrero,
Andrew J. Millis,
Thomas Schäfer
Abstract:
The ability to control the properties of twisted bilayer transition metal dichalcogenides in situ makes them an ideal platform for investigating the interplay of strong correlations and geometric frustration. Of particular interest are the low energy scales, which make it possible to experimentally access both temperature and magnetic fields that are of the order of the bandwidth or the correlatio…
▽ More
The ability to control the properties of twisted bilayer transition metal dichalcogenides in situ makes them an ideal platform for investigating the interplay of strong correlations and geometric frustration. Of particular interest are the low energy scales, which make it possible to experimentally access both temperature and magnetic fields that are of the order of the bandwidth or the correlation scale. In this manuscript we analyze the moiré Hubbard model, believed to describe the low energy physics of an important subclass of the twisted bilayer compounds. We establish its magnetic and the metal-insulator phase diagram for the full range of magnetic fields up to the fully spin polarized state. We find a rich phase diagram including fully and partially polarized insulating and metallic phases of which we determine the interplay of magnetic order, Zeeman-field, and metallicity, and make connection to recent experiments.
△ Less
Submitted 27 April, 2023; v1 submitted 23 March, 2023;
originally announced March 2023.
-
Precisely computing phonons via irreducible derivatives
Authors:
Sasaank Bandi,
C. A. Marianetti
Abstract:
Computing phonons from first-principles is typically considered a solved problem, yet inadequacies in existing techniques continue to yield deficient results in systems with sensitive phonons. Here we circumvent this issue using the lone irreducible derivative (LID) and bundled irreducible derivative (BID) approaches to computing phonons via finite displacements, where the former optimizes precisi…
▽ More
Computing phonons from first-principles is typically considered a solved problem, yet inadequacies in existing techniques continue to yield deficient results in systems with sensitive phonons. Here we circumvent this issue using the lone irreducible derivative (LID) and bundled irreducible derivative (BID) approaches to computing phonons via finite displacements, where the former optimizes precision via energy derivatives and the latter provides the most efficient algorithm using force derivatives. A condition number optimized (CNO) basis for BID is derived which guarantees the minimum amplification of error. Additionally, a hybrid LID-BID approach is formulated, where select irreducible derivatives computed using LID replace BID results. We illustrate our approach on two prototypical systems with sensitive phonons: the shape memory alloy AuZn and metallic lithium. Comparing our resulting phonons in the aforementioned crystals to calculations in the literature reveals nontrivial inaccuracies. Our approaches can be fully automated, making them well suited for both niche systems of interest and high throughput approaches.
△ Less
Submitted 27 October, 2022;
originally announced October 2022.
-
Anharmonic phonon behavior via irreducible derivatives: self-consistent perturbation theory and molecular dynamics
Authors:
Enda Xiao,
Chris A. Marianetti
Abstract:
Cubic phonon interactions are now regularly computed from first principles, and the quartic interactions have begun to receive more attention. Given this realistic anharmonic vibrational Hamiltonian, the classical phonon Green's function can be precisely measured using molecular dynamics, which can then be used to rigorously assess the range of validity for self-consistent diagrammatic approaches…
▽ More
Cubic phonon interactions are now regularly computed from first principles, and the quartic interactions have begun to receive more attention. Given this realistic anharmonic vibrational Hamiltonian, the classical phonon Green's function can be precisely measured using molecular dynamics, which can then be used to rigorously assess the range of validity for self-consistent diagrammatic approaches in the classical limit. Here we use the bundled irreducible derivative approach to efficiently and precisely compute the cubic and quartic phonon interactions of CaF$_2$, systematically obtaining the vibrational Hamiltonian purely in terms of irreducible derivatives. non frequency shifts and linewidths, We demonstrate that the 4-phonon sunset diagram has an important contribution to the optical phonon linewidths beyond $T=500$ K. Reasonable results are obtained even at $T=900$ K when performing self-consistency using the 4-phonon loop diagram and evaluating the 3-phonon bubble and 4-phonon sunset diagrams post self-consistency. Further improvements are obtained by performing quasiparticle perturbation theory, where both the 4-phonon loop and the real part of the 3-phonon bubble are employed during self-consistency. Our irreducible derivative approach to self-consistent perturbation theory is a robust tool for studying anharmonic phonons in both the quantum and classical regimes.
△ Less
Submitted 18 November, 2023; v1 submitted 27 October, 2022;
originally announced October 2022.
-
Precise ground state of multi-orbital Mott systems via the variational discrete action theory
Authors:
Zhengqian Cheng,
Chris A. Marianetti
Abstract:
Determining the ground state of multi-orbital Hubbard models is critical for understanding strongly correlated electron materials, yet existing methods struggle to simultaneously reach zero temperature and infinite system size. The \textit{de facto} standard is to approximate a finite dimension multi-orbital Hubbard model with a $d=\infty$ version, which can then be formally solved via the dynamic…
▽ More
Determining the ground state of multi-orbital Hubbard models is critical for understanding strongly correlated electron materials, yet existing methods struggle to simultaneously reach zero temperature and infinite system size. The \textit{de facto} standard is to approximate a finite dimension multi-orbital Hubbard model with a $d=\infty$ version, which can then be formally solved via the dynamical mean-field theory (DMFT), though the DMFT solution is limited by the state of unbiased impurity solvers for zero temperature and multiple orbitals. The recently developed variational discrete action theory (VDAT) offers a new approach to solve the $d=\infty$ Hubbard model, with a variational ansatz that is controlled by an integer $\mathcal{N}$, and monotonically approaches the exact solution at an increasing computational cost. Here we propose a decoupled minimization algorithm to implement VDAT for the multi-orbital Hubbard model in $d=\infty$ and study $\mathcal{N}=2-4$ . At $\mathcal{N}=2$, VDAT rigorously recovers the multi-orbital Gutzwiller approximation, reproducing known results. At $\mathcal{N}=3$, VDAT precisely captures the competition between the Hubbard $U$, Hund $J$, and crystal field $Δ$ in the two orbital Hubbard model over all parameter space, with a negligible computational cost. For sufficiently large $U/t$ and $J/U$, we show that $Δ$ drives a first-order transition within the Mott insulating regime. In the large orbital polarization limit with finite $J/U$, we find that interactions have a nontrivial effect even for small $U/t$. VDAT will have far ranging implications for understanding multi-orbital model Hamiltonians and strongly correlated electron materials.
△ Less
Submitted 6 November, 2023; v1 submitted 16 June, 2022;
originally announced June 2022.
-
Capturing the ground state of uranium dioxide from first principles: crystal distortion, magnetic structure, and phonons
Authors:
Shuxiang Zhou,
Hao Ma,
Enda Xiao,
Krzysztof Gofryk,
Chao Jiang,
Michael E. Manley,
David H. Hurley,
Chris A. Marianetti
Abstract:
Uranium dioxide (UO$_2$) remains a formidable challenge for first-principles approaches, due to the complex interplay among spin-orbit coupling, Mott physics, magnetic ordering, and crystal distortions. Here we use DFT+$U$ to explore UO$_2$ at zero temperature, incorporating all the aforementioned phenomena. The technical challenge is to navigate the many metastable electronic states produced by D…
▽ More
Uranium dioxide (UO$_2$) remains a formidable challenge for first-principles approaches, due to the complex interplay among spin-orbit coupling, Mott physics, magnetic ordering, and crystal distortions. Here we use DFT+$U$ to explore UO$_2$ at zero temperature, incorporating all the aforementioned phenomena. The technical challenge is to navigate the many metastable electronic states produced by DFT+$U$, which is acomplished using $f$-orbital occupation matrix control to search for the ground state. We restrict our search to the high-symmetry ferromagnetic phase, including spin-orbit coupling, which produces a previously unreported occupation matrix. This newfound occupation matrix is then used as an initialization to explore the broken symmetry phases. We find the oxygen cage distortion of the 3k antiferromagnetic state to be in excellent agreement with experiments, and both the spin-orbit coupling and the Hubbard $U$ are critical ingredients. We demonstrate that only select phonon modes have a strong dependence on the Hubbard $U$, whereas magnetic ordering has only a small influence overall. We perform measurements of the phonon dispersion curves using inelastic neutron scattering, and our calculations show good agreement when using reasonable values of $U$. The quantitative success of DFT+$U$ warrants exploration of thermal transport and other observables within this level of theory.
△ Less
Submitted 12 September, 2022; v1 submitted 28 April, 2022;
originally announced April 2022.
-
Improving empirical interatomic potentials for predicting thermophysical properties by using an irreducible derivatives approach: The case of thorium dioxide
Authors:
Shuxiang Zhou,
Chao Jiang,
Enda Xiao,
Michael W. D. Cooper,
Miaomiao **,
Chris A. Marianetti,
David H Hurley,
Marat Khafizov
Abstract:
The accuracy of physical property predictions using classical molecular dynamics simulations is determined by the quality of the empirical interatomic potentials (EIPs). We introduce a training approach for EIPs, based on direct comparisons of the second- and third-order interatomic force constants (IFCs) between EIP and density functional theory (DFT) calculations. This work's unique aspect is th…
▽ More
The accuracy of physical property predictions using classical molecular dynamics simulations is determined by the quality of the empirical interatomic potentials (EIPs). We introduce a training approach for EIPs, based on direct comparisons of the second- and third-order interatomic force constants (IFCs) between EIP and density functional theory (DFT) calculations. This work's unique aspect is the utilization of irreducible derivatives (IDs) of the total energy, which leverage on the symmetry of the crystalline structure and provide a minimal representation of the IFCs. Our approach is tailored toward accurate predictions of thermal conductivity, thus requiring knowledge of both harmonic and anharmonic IFCs by matching second- and third-order displacement derivatives, whereas second-order strain derivatives are needed for determining the elastic constants. We demonstrate this approach as an efficient and robust manner in which to train EIPs for predicting phonons and related properties, by optimizing parameters of an embedded-atom method potential for ThO$_2$, which is used as a model system for fluorite oxides. Our ID-trained EIP provides thermophysical properties in great agreement with DFT, and outperforms previously widely utilized EIP for ThO$_2$ in phonon dispersion and thermal conductivity calculations. It also provides reasonable estimates of thermal expansion and the formation energies of simple defects.
△ Less
Submitted 28 April, 2022;
originally announced April 2022.
-
Thermal Energy Transport in Oxide Nuclear Fuel
Authors:
David H. Hurley,
Anter El-Azab,
Matthew S. Bryan,
Michael W. D. Cooper,
Cody A. Dennett,
Krzysztof Gofryk,
Lingfeng He,
Marat Khafizov,
Gerard H. Lander,
Michael E. Manley,
J. Matthew Mann,
Chris A. Marianetti,
Karl Rickert,
Farida A. Selim,
Michael R. Tonks,
Janelle P. Wharry
Abstract:
To efficiently capture the energy of the nuclear bond, advanced nuclear reactor concepts seek solid fuels that must withstand unprecedented temperature and radiation extremes. In these advanced fuels, thermal energy transport under irradiation is directly related to reactor performance as well as reactor safety. The science of thermal transport in nuclear fuel is a grand challenge due to both comp…
▽ More
To efficiently capture the energy of the nuclear bond, advanced nuclear reactor concepts seek solid fuels that must withstand unprecedented temperature and radiation extremes. In these advanced fuels, thermal energy transport under irradiation is directly related to reactor performance as well as reactor safety. The science of thermal transport in nuclear fuel is a grand challenge due to both computational and experimental complexities. Here, we provide a comprehensive review of thermal transport research on two actinide oxides: one currently in use in commercial nuclear reactors, uranium dioxide (UO2), and one advanced fuel candidate material, thorium dioxide (ThO2). In both materials, heat is carried by lattice waves or phonons. Crystalline defects caused by fission events effectively scatter phonons and lead to a degradation in fuel performance over time. Bolstered by new computational and experimental tools, researchers are now develo** the foundational work necessary to accurately model and ultimately control thermal transport in advanced nuclear fuel. We begin by reviewing research aimed at understanding thermal transport in perfect single crystals. The absence of defects enables studies that focus on the fundamental aspects of phonon transport. Next, we review research that targets defect generation and evolution. Here, the focus is on ion irradiation studies used as surrogates for damage caused by fission products. We end this review with a discussion of modeling and experimental efforts directed at predicting and validating mesoscale thermal transport in the presence of irradiation defects. While efforts into these research areas have been robust, challenging work remains in develo** holistic tools to capture and predict thermal energy transport across widely varying environmental conditions.
△ Less
Submitted 27 April, 2022;
originally announced April 2022.
-
Advances in actinide thin films: synthesis, properties, and future directions
Authors:
K. D. Vallejo,
F. Kabir,
N. Poudel,
C. A. Marianetti,
D. H. Hurley,
P. J. Simmonds,
C. A. Dennett,
K. Gofryk
Abstract:
Actinide-based compounds exhibit unique physics due to the presence of 5f electrons, and serve in many cases as important technological materials. Targeted thin film synthesis of actinide materials has been successful in generating high-purity specimens in which to study individual physical phenomena. These films have enabled the study of the unique electron configuration, strong mass renormalizat…
▽ More
Actinide-based compounds exhibit unique physics due to the presence of 5f electrons, and serve in many cases as important technological materials. Targeted thin film synthesis of actinide materials has been successful in generating high-purity specimens in which to study individual physical phenomena. These films have enabled the study of the unique electron configuration, strong mass renormalization, and nuclear decay in actinide metals and compounds. The growth of these films, as well as their thermophysical, magnetic, and topological properties, have been studied in a range of chemistries, albeit far fewer than most classes of thin film systems. This relative scarcity is the result of limited source material availability and safety constraints associated with the handling of radioactive materials. Here, we review recent work on the synthesis and characterization of actinide-based thin films in detail, describing both synthesis methods and modelling techniques for these materials. We review reports on pyrometallurgical, solution-based, and vapor deposition methods. We highlight the current state-of-the-art in order to construct a path forward to higher quality actinide thin films and heterostructure devices.
△ Less
Submitted 21 April, 2022;
originally announced April 2022.
-
The generalized quasiharmonic approximation via space group irreducible derivatives
Authors:
Mark A. Mathis,
Amey Khanolkar,
Lyuwen Fu,
Matthew S. Bryan,
Cody A. Dennett,
Karl Rickert,
J. Matthew Mann,
Barry Winn,
Douglas L. Abernathy,
Michael E. Manley,
David H. Hurley,
Chris A. Marianetti
Abstract:
The quasiharmonic approximation (QHA) is the simplest nontrivial approximation for interacting phonons under constant pressure, bringing the effects of anharmonicity into temperature dependent observables. Nonetheless, the QHA is often implemented with additional approximations due to the complexity of computing phonons under arbitrary strains, and the generalized QHA, which employs constant stres…
▽ More
The quasiharmonic approximation (QHA) is the simplest nontrivial approximation for interacting phonons under constant pressure, bringing the effects of anharmonicity into temperature dependent observables. Nonetheless, the QHA is often implemented with additional approximations due to the complexity of computing phonons under arbitrary strains, and the generalized QHA, which employs constant stress boundary conditions, has not been completely developed. Here we formulate the generalized QHA, providing a practical algorithm for computing the strain state and other observables as a function of temperature and true stress. We circumvent the complexity of computing phonons under arbitrary strains by employing irreducible second order displacement derivatives of the Born-Oppenheimer potential and their strain dependence, which are efficiently and precisely computed using the lone irreducible derivative approach. We formulate two complementary strain parametrizations: a discretized strain grid interpolation and a Taylor series expansion in symmetrized strain. We illustrate our approach by evaluating the temperature and pressure dependence of the elastic constant tensor and the thermal expansion in thoria (ThO$_2$) using density functional theory with three exchange-correlation functionals. The QHA results are compared to our measurements of the elastic constant tensor using time domain Brillouin scattering and inelastic neutron scattering. Our irreducible derivative approach simplifies the implementation of the generalized QHA, which will facilitate reproducible, data driven applications.
△ Less
Submitted 28 February, 2022;
originally announced February 2022.
-
Validating First-Principles Phonon Lifetimes via Inelastic Neutron Scattering
Authors:
Enda Xiao,
Hao Ma,
Matthew S. Bryan,
Lyuwen Fu,
J. Matthew Mann,
Barry Winn,
Douglas L. Abernathy,
Raphaël P. Hermann,
Amey R. Khanolkar,
Cody A. Dennett,
David H. Hurley,
Michael E. Manley,
Chris A. Marianetti
Abstract:
Phonon lifetimes are a key component of quasiparticle theories of transport, yet first-principles lifetimes are rarely directly compared to inelastic neutron scattering (INS) results. Existing comparisons show discrepancies even at temperatures where perturbation theory is expected to be reliable. In this work, we demonstrate that the reciprocal space voxel ($q$-voxel), which is the finite region…
▽ More
Phonon lifetimes are a key component of quasiparticle theories of transport, yet first-principles lifetimes are rarely directly compared to inelastic neutron scattering (INS) results. Existing comparisons show discrepancies even at temperatures where perturbation theory is expected to be reliable. In this work, we demonstrate that the reciprocal space voxel ($q$-voxel), which is the finite region in reciprocal space required in INS data analysis, must be explicitly accounted for within theory in order to draw a meaningful comparison. We demonstrate accurate predictions of peak widths of the scattering function when accounting for the $q$-voxel in CaF$_2$ and ThO$_2$. Passing this test implies high fidelity of the phonon interactions and the approximations used to compute the Green's function, serving as critical benchmark of theory, and indicating that other material properties should be accurately predicted; which we demonstrate for thermal conductivity.
△ Less
Submitted 22 February, 2022;
originally announced February 2022.
-
Variational Discrete Action Theory
Authors:
Zhengqian Cheng,
Chris A. Marianetti
Abstract:
Here we propose the Variational Discrete Action Theory (VDAT) to study the ground state properties of quantum many-body Hamiltonians. VDAT is a variational theory based on the sequential product density matrix (SPD) ansatz, characterized by an integer $\mathcal{N}$, which monotonically approaches the exact solution with increasing $\mathcal{N}$. To evaluate the SPD, we introduce a discrete action…
▽ More
Here we propose the Variational Discrete Action Theory (VDAT) to study the ground state properties of quantum many-body Hamiltonians. VDAT is a variational theory based on the sequential product density matrix (SPD) ansatz, characterized by an integer $\mathcal{N}$, which monotonically approaches the exact solution with increasing $\mathcal{N}$. To evaluate the SPD, we introduce a discrete action and a corresponding integer time Green's function. We use VDAT to exactly evaluate the SPD in two canonical models of interacting electrons: the Anderson impurity model (AIM) and the $d=\infty$ Hubbard model. For the latter, we evaluate $\mathcal{N}=2-4$, where $\mathcal{N}=2$ recovers the Gutzwiller approximation (GA), and we show that $\mathcal{N}=3$, which exactly evaluates the Gutzwiller-Baeriswyl wave function, provides a truly minimal yet precise description of Mott physics with a cost similar to the GA. VDAT is a flexible theory for studying quantum Hamiltonians, competing both with state-of-the-art methods and simple, efficient approaches all within a single framework.
△ Less
Submitted 29 November, 2020;
originally announced November 2020.
-
Foundations of the Variational Discrete Action Theory
Authors:
Zhengqian Cheng,
Chris A. Marianetti
Abstract:
Variational wave functions and Green's functions are two important paradigms for solving quantum Hamiltonians, each having their own advantages. Here we detail the Variational Discrete Action Theory (VDAT), which exploits the advantages of both paradigms in order to approximately solve the ground state of quantum Hamiltonians. VDAT consists of two central components: the sequential product density…
▽ More
Variational wave functions and Green's functions are two important paradigms for solving quantum Hamiltonians, each having their own advantages. Here we detail the Variational Discrete Action Theory (VDAT), which exploits the advantages of both paradigms in order to approximately solve the ground state of quantum Hamiltonians. VDAT consists of two central components: the sequential product density matrix (SPD) ansatz and a discrete action associated with the SPD. The SPD is a variational ansatz inspired by the Trotter decomposition and characterized by an integer $\mathcal{N}$, recovering many well known variational wave functions, in addition to the exact solution for $\mathcal{N}=\infty$. The discrete action describes all dynamical information of an effective integer time evolution with respect to the SPD. We generalize the path integral to our integer time formalism, which converts a dynamic correlation function in integer time to a static correlation function in a compound space. We also generalize the usual many-body Green's function formalism to integer time, which results in analogous but distinct mathematical structures, yielding integer time versions of the generating functional, Dyson equation, and Bethe-Salpeter equation. We prove that the SPD can be exactly evaluated in the multi-band Anderson impurity model (AIM) by summing a finite number of diagrams. For the multi-band Hubbard model, we prove that the self-consistent canonical discrete action approximation (SCDA), which is the integer time analogue of the dynamical mean-field theory, exactly evaluates the SPD for $d=\infty$. VDAT within the SCDA provides an efficient yet reliable method for capturing the local physics of quantum lattice models, which will have broad applications for strongly correlated electron materials. More generally, VDAT should find applications in various many-body problems in physics.
△ Less
Submitted 3 March, 2023; v1 submitted 29 November, 2020;
originally announced November 2020.
-
Magnetic, transport, and thermal properties of $δ$-phase UZr$_2$
Authors:
Xiaxin Ding,
Tiankai Yao,
Lyuwen Fu,
Zilong Hua,
Jason Harp,
Chris Marianetti,
Madhab Neupane,
Michael E. Manley,
David Hurley,
Krzysztof Gofryk
Abstract:
Alloys of hexagonal $δ$-phase UZr$_2$ have been synthesized and studied by means of heat capacity, magnetic susceptibility, magnetization, electrical resistivity, magnetoresistance, thermoelectric power, thermal conductivity measurements, for the first time, at temperatures from 1.8 to 300 K and in magnetic fields up to 8 T. The weak temperature dependence of the magnetic susceptibility and the sm…
▽ More
Alloys of hexagonal $δ$-phase UZr$_2$ have been synthesized and studied by means of heat capacity, magnetic susceptibility, magnetization, electrical resistivity, magnetoresistance, thermoelectric power, thermal conductivity measurements, for the first time, at temperatures from 1.8 to 300 K and in magnetic fields up to 8 T. The weak temperature dependence of the magnetic susceptibility and the small value of both Seebeck (0.75 $μ$V/K at room temperature) and of the Sommerfeld coefficient (13.5 mJ mol$^{-1}$ K$^{-2}$) point to 5$f$-electrons in this material having a delocalized nature. The electrical resistivity and magnetoresistance indicate the presence of significant electronic disorder in $δ$-UZr$_2$, consistent with the disorder in its crystal structure. Density functional theory calculations have been performed and compared to experimental results.
△ Less
Submitted 6 August, 2020;
originally announced August 2020.
-
Off-shell effective energy theory: a unified treatment of the Hubbard model from d=1 to d=$\infty$
Authors:
Zhengqian Cheng,
Chris A. Marianetti
Abstract:
Here we propose an exact formalism, off-shell effective energy theory (OET), which provides a thermodynamic description of a generic quantum Hamiltonian. The OET is based on a partitioning of the Hamiltonian and a corresponding density matrix ansatz constructed from an off-shell extension of the equilibrium density matrix; and there are dual realizations based on a given partitioning. To approxima…
▽ More
Here we propose an exact formalism, off-shell effective energy theory (OET), which provides a thermodynamic description of a generic quantum Hamiltonian. The OET is based on a partitioning of the Hamiltonian and a corresponding density matrix ansatz constructed from an off-shell extension of the equilibrium density matrix; and there are dual realizations based on a given partitioning. To approximate OET, we introduce the central point expansion (CPE), which is an expansion of the density matrix ansatz, and we renormalize the CPE using a standard expansion of the ground state energy. We showcase the OET for the one band Hubbard model in d=1, 2, and $\infty$, using a partitioning between kinetic and potential energy, yielding two realizations denoted as $\mathcal{K}$ and $\mathcal{X}$. OET shows favorable agreement with exact or state-of-the-art results over all parameter space, and has a negligible computational cost. Physically, $\mathcal{K}$ describes the Fermi liquid, while $\mathcal{X}$ gives an analogous description of both the Luttinger liquid and the Mott insulator. Our approach should find broad applicability in lattice model Hamiltonians, in addition to real materials systems.
△ Less
Submitted 8 November, 2019;
originally announced November 2019.
-
A group theoretical approach to computing phonons and their interactions
Authors:
Lyuwen Fu,
Mordechai Kornbluth,
Zhengqian Cheng,
Chris A. Marianetti
Abstract:
Here we present four independent advances which facilitate the computation of phonons and their interactions from first-principles. First, we implement a group-theoretical approach to construct the order N Taylor series of a d-dimensional crystal purely in terms of space group irreducible derivatives (ID), which guarantees symmetry by construction and allows for a practical means of communicating…
▽ More
Here we present four independent advances which facilitate the computation of phonons and their interactions from first-principles. First, we implement a group-theoretical approach to construct the order N Taylor series of a d-dimensional crystal purely in terms of space group irreducible derivatives (ID), which guarantees symmetry by construction and allows for a practical means of communicating and storing phonons and their interactions. Second, we prove that the smallest possible supercell which accommodates N given wavevectors in a d-dimensional crystal is determined using the Smith Normal Form of the matrix formed from the corresponding wavevectors; resulting in negligible computational cost to find said supercell, in addition to providing the maximum required multiplicity for uniform supercells at arbitrary N and d. Third, we develop a series of finite displacement methodologies to compute phonons and their interactions which exploit the first two developments: lone and bundled irreducible derivative (LID and BID) approaches. LID computes a single ID, or as few as possible, at a time in the smallest supercell possible, while BID exploits perturbative derivatives for some order less than N (e.g. Hellman-Feynman forces) in order to extract all ID in the smallest possible supercells using the fewest possible computations. Finally, we derive an equation for the order N-2 volume derivatives of the phonons in terms of the order N ID. Given that the former are easily computed, they can be used as a stringent, infinite ranged test of the ID. Our general framework is illustrated on graphene, yielding irreducible phonon interactions to fifth order. Additionally, we provide a cost analysis for the rock-salt structure at N=3, demonstrating a massive speedup compared to popular finite displacement methods in the literature.
△ Less
Submitted 12 April, 2019;
originally announced April 2019.
-
Compositional phase stability of correlated electron materials within DFT+DMFT
Authors:
Eric B. Isaacs,
Chris A. Marianetti
Abstract:
Predicting the compositional phase stability of strongly correlated electron materials is an outstanding challenge in condensed matter physics, requiring precise computations of total energies. In this work, we employ the density functional theory plus dynamical mean-field theory (DFT+DMFT) formalism to address local correlations due to transition metal d electrons on compositional phase stability…
▽ More
Predicting the compositional phase stability of strongly correlated electron materials is an outstanding challenge in condensed matter physics, requiring precise computations of total energies. In this work, we employ the density functional theory plus dynamical mean-field theory (DFT+DMFT) formalism to address local correlations due to transition metal d electrons on compositional phase stability in the prototype rechargeable battery cathode material LixCoO2, and detailed comparisons are made with the simpler DFT+U approach (i.e. the Hartree-Fock solution of the DMFT impurity problem). Local interactions are found to strongly impact the energetics of the band insulator LiCoO2, most significantly via the Eg orbitals, which are partially occupied via hybridization with O p states. We find CoO2 and Li1/2CoO2 to be moderately correlated Fermi liquids with quasiparticle weights of 0.6-0.8 for the T2g states, which are most impacted by the interactions. As compared to DFT+U, DFT+DMFT considerably dampens the increase in total energy as U is increased, which indicates that dynamical correlations are important to describe this class of materials despite the relatively modest quasiparticle weights. Unlike DFT+U, which can incorrectly drive LixCoO2 towards spurious phase separating or charge ordered states, DFT+DMFT correctly captures the system's phase stability and does not exhibit a strong charge ordering tendency. Most importantly, the error within DFT+U varies strongly as the composition changes, challenging the common practice of artificially tuning U within DFT+U to compensate the errors of Hartree-Fock. DFT+DMFT predicts the average intercalation voltage decreases relative to DFT, opposite to the result of DFT+U, which would yield favorable agreement with experiment in conjunction with the overprediction of the voltage by the strongly constrained and appropriately normed DFT functional.
△ Less
Submitted 16 July, 2020; v1 submitted 25 March, 2019;
originally announced March 2019.
-
Uniaxial Strain Tuning of Superconductivity in 2$H$-NbSe$_{2}$
Authors:
Andrew Wieteska,
Ben Foutty,
Zurab Guguchia,
Felix Flicker,
Ben Mazel,
Lyuwen Fu,
Shuang Jia,
Chris Marianetti,
Jasper van Wezel,
Abhay Pasupathy
Abstract:
We explore the effect of lattice anisotropy on the charge-ordered superconductor 2H-NbSe$_{2}$. Using a novel strain apparatus, we measure the superconducting transition temperature $T_{sc}$ as a function of uniaxial strain. It is found that $T_{sc}$ is independent of tensile(compressive) strain below a threshold of 0.2\% (0.1\%), but decreases strongly with larger strains with an average rate of…
▽ More
We explore the effect of lattice anisotropy on the charge-ordered superconductor 2H-NbSe$_{2}$. Using a novel strain apparatus, we measure the superconducting transition temperature $T_{sc}$ as a function of uniaxial strain. It is found that $T_{sc}$ is independent of tensile(compressive) strain below a threshold of 0.2\% (0.1\%), but decreases strongly with larger strains with an average rate of $1.3\,$K/\% ($2.5\,$K/\%). Transport signatures of charge order are largely unaffected as a function of strain. Theoretical considerations show that the change in the behavior of $T_{sc}$ with strain coincides with a phase transition from 3Q to 1Q charge order in the material. The spectral weight on one of the Fermi surface bands is found to change strongly as a consequence of this phase transition, providing a pathway to tune superconducting order.
△ Less
Submitted 12 March, 2019;
originally announced March 2019.
-
Hundredfold Enhancement of Light Emission via Defect Control in Monolayer Transition-Metal Dichalcogenides
Authors:
D. Edelberg,
D. Rhodes,
A. Kerelsky,
B. Kim,
J. Wang,
A. Zangiabadi,
C. Kim,
A. Abhinandan,
J. Ardelean,
M. Scully,
D. Scullion,
L. Embon,
I. Zhang,
R. Zu,
Elton J. G. Santos,
L. Balicas,
C. Marianetti,
K. Barmak,
X. -Y. Zhu,
J. Hone,
A. N. Pasupathy
Abstract:
Two dimensional (2D) transition-metal dichalcogenide (TMD) based semiconductors have generated intense recent interest due to their novel optical and electronic properties, and potential for applications. In this work, we characterize the atomic and electronic nature of intrinsic point defects found in single crystals of these materials synthesized by two different methods - chemical vapor transpo…
▽ More
Two dimensional (2D) transition-metal dichalcogenide (TMD) based semiconductors have generated intense recent interest due to their novel optical and electronic properties, and potential for applications. In this work, we characterize the atomic and electronic nature of intrinsic point defects found in single crystals of these materials synthesized by two different methods - chemical vapor transport and self-flux growth. Using a combination of scanning tunneling microscopy (STM) and scanning transmission electron microscopy (STEM), we show that the two major intrinsic defects in these materials are metal vacancies and chalcogen antisites. We show that by control of the synthetic conditions, we can reduce the defect concentration from above $10^{13} /cm^2$ to below $10^{11} /cm^2$. Because these point defects act as centers for non-radiative recombination of excitons, this improvement in material quality leads to a hundred-fold increase in the radiative recombination efficiency.
△ Less
Submitted 30 April, 2018;
originally announced May 2018.
-
Structural and metal-insulator transitions in rhenium based double perovskites via orbital ordering
Authors:
Alex Taekyung Lee,
Chris A. Marianetti
Abstract:
Re-based double perovskites (DPs) exhibit a complex interplay of structural and metal-insulator transitions. Here we systematically study the ground state electronic and structural properties for a family of Re-based DPs $A_2B$ReO$_6$ ($A$=Sr, Ca and $B$=Cr, Fe), which are related by a common low energy Hamiltonian, using density functional theory + $U$ calculations. We show that the on-site inter…
▽ More
Re-based double perovskites (DPs) exhibit a complex interplay of structural and metal-insulator transitions. Here we systematically study the ground state electronic and structural properties for a family of Re-based DPs $A_2B$ReO$_6$ ($A$=Sr, Ca and $B$=Cr, Fe), which are related by a common low energy Hamiltonian, using density functional theory + $U$ calculations. We show that the on-site interaction $U$ of Re induces orbital ordering (denoted COO), with each Re site having an occupied $d_{xy}$ orbital and a C-type alternation among $d_{xz}/d_{yz}$, resulting in an insulating state consistent with experimentally determined insulators Sr$_2$CrReO$_6$, Ca$_2$CrReO$_6$, and Ca$_2$FeReO$_6$. The threshold value of $U_{Re}$ for orbital ordering is reduced by inducing $E_g$ octahedral distortions of the same C-type wavelength (denoted COD), which serves as a structural signature of the orbital ordering; octahedral tilting also reduces the threshold. The COO, and the concomitant COD, are a spontaneously broken symmetry for the Sr based materials (i.e. $a^0a^0c^-$ tilt pattern), while not for the Ca based systems (i.e. $a^-a^-b^+$ tilt pattern). Spin-orbit coupling does not qualitatively change the physics of the COO/COD, but can induce relevant quantitative changes. We prove that a single set of $U_{Cr}$,$U_{Fe}$,$U_{Re}$ capture the experimentally observed metallic state in Sr$_2$FeReO$_6$ and insulating states in the other three systems. We predict that the COO is the origin of the insulating state in Sr$_2$CrReO$_6$, and that the concomitant COD may be experimentally observed at sufficiently low temperatures (ie. space group P$4_2/m$). Additionally, given our prescribed values of $U$, we show that the COO induced insulating state in Ca$_2$CrReO$_6$ will survive even if the COD amplitude is suppressed (e.g. due to thermal fluctuations).
△ Less
Submitted 12 December, 2017; v1 submitted 25 August, 2017;
originally announced August 2017.
-
Possible topologically non-trivial superconducting order parameter in type-II Weyl semimetal T_d-MoTe_2
Authors:
Z. Guguchia,
F. v. Rohr,
Z. Shermadini,
A. T. Lee,
S. Banerjee,
A. R. Wieteska,
C. A. Marianetti,
H. Luetkens,
Z. Gong,
B. A. Frandsen,
S. C. Cheung,
C. Baines,
A. Shengelaya,
A. N. Pasupathy,
E. Morenzoni,
S. J. L. Billinge,
A. Amato,
R. J. Cava,
R. Khasanov,
Y. J. Uemura
Abstract:
MoTe_2, with the orthorhombic T_d phase, is a new type (type-II) of Weyl semimetal, where the Weyl Fermions emerge at the boundary between electron and hole pockets. Non-saturating magnetoresistance (MR), and superconductivity were also observed in T_d-MoTe_2. Understanding the superconductivity in T_d-MoTe_2, which was proposed to be topologically non-trivial, is of eminent interest. Here, we rep…
▽ More
MoTe_2, with the orthorhombic T_d phase, is a new type (type-II) of Weyl semimetal, where the Weyl Fermions emerge at the boundary between electron and hole pockets. Non-saturating magnetoresistance (MR), and superconductivity were also observed in T_d-MoTe_2. Understanding the superconductivity in T_d-MoTe_2, which was proposed to be topologically non-trivial, is of eminent interest. Here, we report high-pressure (p_max = 1.3 GPa) muon spin rotation experiments on the temperature-dependent magnetic penetration depth in T_d-MoTe_2. A substantial increase of the superfluid density n_s/m^* and a linear scaling with T_c is observed under pressure. Moreover, the superconducting order parameter in T_d-MoTe_2 is determined to be two gap (s+s)-wave symmetric. We also excluded time reversal symmetry breaking in the SC state with sensitive zero-field $μ$SR experiments. Considering the previous report \cite{Balicas1} on the strong suppression of T_c in T_d-MoTe_2 by disorder, we suggest that s^{+-} (topological order parameter) state is more likely to be realized in MoTe_2 than the s^{++} (trivial) state. Should s^{+-} be the SC gap symmetry, the T_d-MoTe_2 is, to our knowledge, the first known example of a time reversal invariant topological (Weyl) superconductor.
△ Less
Submitted 17 April, 2017;
originally announced April 2017.
-
Compositional phase stability of strongly correlated electron materials within DFT+$U$
Authors:
Eric B. Isaacs,
Chris A. Marianetti
Abstract:
Predicting the compositional phase stability of strongly correlated electron materials is an outstanding challenge in condensed matter physics. In this work, we employ the DFT+U formalism to address the effects of local correlations due to transition metal d electrons on compositional phase stability in the prototype phase stable and separating materials LixCoO2 and olivine LixFePO4, respectively.…
▽ More
Predicting the compositional phase stability of strongly correlated electron materials is an outstanding challenge in condensed matter physics. In this work, we employ the DFT+U formalism to address the effects of local correlations due to transition metal d electrons on compositional phase stability in the prototype phase stable and separating materials LixCoO2 and olivine LixFePO4, respectively. We exploit a new spectral decomposition of the DFT+U total energy, revealing the distinct roles of the filling and ordering of the d orbital correlated subspace. The on-site interaction U drives both of these very different materials systems towards phase separation, stemming from enhanced ordering of the d orbital occupancies in the x=0 and x=1 species, whereas changes in the overall filling of the d shell contribute negligibly. We show that DFT+U formation energies are qualitatively consistent with experiments for phase stable LixCoO2, phase separating LixFePO4, and phase stable LixCoPO4. However, we find that charge ordering plays a critical role in the energetics at intermediate x, strongly dampening the tendency for the Hubbard U to drive phase separation. Most relevantly, the phase stability of Li1/2CoO2 within DFT+U is qualitatively incorrect without allowing charge ordering, which is problematic given that neither charge ordering nor the band gap that it induces are observed in experiment. We demonstrate that charge ordering arises from the correlated subspace interaction energy as opposed to the double counting. Additionally, we predict the Li order-disorder transition temperature for Li1/2CoO2, demonstrating that the unphysical charge ordering within DFT+U renders the method problematic, often producing unrealistically large results. Our findings motivate the need for other advanced techniques, such as DFT+DMFT, for total energies in strongly correlated materials.
△ Less
Submitted 10 November, 2016;
originally announced November 2016.
-
Pressure-resistant intermediate valence in Kondo insulator SmB6
Authors:
Nicholas P. Butch,
Johnpierre Paglione,
Paul Chow,
Yuming Xiao,
Chris A. Marianetti,
Corwin H. Booth,
Jason R. Jeffries
Abstract:
Resonant x-ray emission spectroscopy (RXES) was used to determine the pressure dependence of the f-electron occupancy in the Kondo insulator SmB6. Applied pressure reduces the f-occupancy, but surprisingly, the material maintains a significant divalent character up to a pressure of at least 35 GPa. Thus, the closure of the resistive activation energy gap and onset of magnetic order are not driven…
▽ More
Resonant x-ray emission spectroscopy (RXES) was used to determine the pressure dependence of the f-electron occupancy in the Kondo insulator SmB6. Applied pressure reduces the f-occupancy, but surprisingly, the material maintains a significant divalent character up to a pressure of at least 35 GPa. Thus, the closure of the resistive activation energy gap and onset of magnetic order are not driven by stabilization of an integer valent state. Over the entire pressure range, the material maintains a remarkably stable intermediate valence that can in principle support a nontrivial band structure.
△ Less
Submitted 7 March, 2016;
originally announced March 2016.
-
Electronic correlations in monolayer VS$_2$
Authors:
Eric B. Isaacs,
Chris A. Marianetti
Abstract:
The layered transition metal dichalcogenide vanadium disulfide (VS$_2$), which nominally has one electron in the $3d$ shell, is potent for strong correlation physics and is possibly another realization of an effective one-band model beyond the cuprates. Here monolayer VS$_2$ in both the trigonal prismatic and octahedral phases is investigated using density functional theory plus Hubbard $U$ (DFT+…
▽ More
The layered transition metal dichalcogenide vanadium disulfide (VS$_2$), which nominally has one electron in the $3d$ shell, is potent for strong correlation physics and is possibly another realization of an effective one-band model beyond the cuprates. Here monolayer VS$_2$ in both the trigonal prismatic and octahedral phases is investigated using density functional theory plus Hubbard $U$ (DFT+$U$) calculations. Trigonal prismatic VS$_2$ has an isolated low-energy band that emerges from a confluence of crystal field splitting and direct V--V hop**. Within spin density functional theory, ferromagnetism splits the isolated band of the trigonal prismatic structure, leading to a low-band-gap $S=1/2$ ferromagnetic Stoner insulator; the octahedral phase is higher in energy. Including the on-site interaction $U$ increases the band gap, leads to Mott insulating behavior, and for sufficiently high values stabilizes the ferromagnetic octahedral phase. The validity of DFT and DFT+$U$ for these two-dimensional materials with potential for strong electronic correlations is discussed. A clear benchmark is given by examining the experimentally observed charge density wave (CDW) in octahedral VS$_2$, for which DFT grossly overestimates the bond length differences compared to known experiments; the presence of CDWs is also probed for the trigonal prismatic phase. Finally, we investigate why only the octahedral phase has been observed in experiments and discuss the possibility of realizing the trigonal prismatic phase. Our work suggests trigonal prismatic VS$_2$ is a promising candidate for strongly correlated electron physics that, if realized, could be experimentally probed in an unprecedented fashion due to its monolayer nature.
△ Less
Submitted 26 February, 2016;
originally announced February 2016.
-
Influence of quantum confinement and strain on orbital polarization of four-layer LaNiO$_3$ superlattices: a DFT+DMFT study
Authors:
Hyowon Park,
Andrew J. Millis,
Chris A. Marianetti
Abstract:
Atomically precise superlattices involving transition metal oxides provide a unique opportunity to engineer correlated electron physics using strain (modulated by choice of substate) and quantum confinement (controlled by layer thickness). Here we use the combination of density functional theory and dynamical mean field theory (DFT+DMFT) to study Ni E$_g$ $d$-orbital polarization in strained LaNiO…
▽ More
Atomically precise superlattices involving transition metal oxides provide a unique opportunity to engineer correlated electron physics using strain (modulated by choice of substate) and quantum confinement (controlled by layer thickness). Here we use the combination of density functional theory and dynamical mean field theory (DFT+DMFT) to study Ni E$_g$ $d$-orbital polarization in strained LaNiO$_3$/LaAlO$_3$ superlattices consisting of four layers of nominally metallic NiO$_2$ and four layers of insulating AlO$_2$ separated by LaO layers. The layer-resolved orbital polarization is calculated as a function of strain and analyzed in terms of structural, quantum confinement, and correlation effects. The effect of strain is determined from the dependence of the results on the Ni-O bond-length ratio and the octahedral rotation angles; quantum confinement is studied by comparison to bulk calculations with similar degrees of strain; correlation effects are inferred by varying interaction parameters within our DFT+DMFT calculations. The calculated dependence of orbital polarization on strain in superlattices is qualitatively consistent with recent X-ray absorption spectroscopy and resonant reflectometry data. However, interesting differences of detail are found between theory and experiment. Under tensile strain, the two inequivalent Ni ions display orbital polarization similar to that calculated for strained bulk LaNiO$_3$ and observed in experiment. Compressive strain produces a larger dependence of orbital polarization on Ni position and even the inner Ni layer exhibits orbital polarization different from that calculated for strained bulk LaNiO$_3$.
△ Less
Submitted 3 February, 2016;
originally announced February 2016.
-
Applicability of DFT + U to U metal and U-Zr alloy
Authors:
Wei Xie,
Chris A. Marianetti,
Dane Morgan
Abstract:
In the Letter [J. Nucl. Mater. 444, 356 (2014)] and Comment [Phys Rev B 90, 157101 (2014)], Soderlind et al. argue that 1) DFT based on GGA already models U metal and U-Zr alloy accurately, and 2) DFT + U models them worse than DFT according to results they calculate or select from our recent study [Phys. Rev. B 88, 235128 (2013)]. Here we demonstrate in response to 1) that previously neglected an…
▽ More
In the Letter [J. Nucl. Mater. 444, 356 (2014)] and Comment [Phys Rev B 90, 157101 (2014)], Soderlind et al. argue that 1) DFT based on GGA already models U metal and U-Zr alloy accurately, and 2) DFT + U models them worse than DFT according to results they calculate or select from our recent study [Phys. Rev. B 88, 235128 (2013)]. Here we demonstrate in response to 1) that previously neglected and more recent experimental data indicate that DFT, even when implemented in all-electron methods, does not model the bulk modulus and elastic constants of αU very accurately. Furthermore, Soderlind et al.'s claim that deficiency exists in our PAW calculation is unfounded and hence our results, including those that show DFT results compare unfavorably with experimental/computational references, are valid. We also demonstrate in response to 2) that Soderlind et al.'s arguments are unsound for three reasons. First, they focus on just the BCC phases γU and γ(U,Zr)--which at the ab initio modeling temperature of 0 K are unstable and hence difficult to model and benchmar--as primary subjects of examination; however it is results for the stable phases mostly neglected by Soderlind et al. that are the primary evidence of our argument. Second, they make unfounded generalization of DFT + U results at selected U eff values to argue that DFT + U in general gives wrong or unsatisfactory results. Third, some key points in Soderlind et al.'s criticisms of DFT + U are not well supported, including the claims that for γ(U,Zr) DFT + U at Ueff = 1.24 eV gives positive deviations from linear dependence of composition that are unprecedentedly large and partially negative enthalpies of mixing that are inconsistent with the existence of miscibility gap in the experimental phase diagram. We therefore maintain our conclusion that DFT + U can be of value for modeling U and U-Zr.
△ Less
Submitted 28 January, 2016;
originally announced January 2016.
-
New class of planar ferroelectric Mott insulators via first principles design
Authors:
Chanul Kim,
Hyowon Park,
Chris A. Marianetti
Abstract:
Inorganic perovskite oxide ferroelectrics have recently generated substantial interest for photovoltaic applications; however, existing materials suffer from excessive electronic band gaps and insufficient electric polarization. The recent resurgence of hybrid perovskite ferroelectrics addresses the aforementioned deficiencies, but they are highly unstable against environmental effects and an inor…
▽ More
Inorganic perovskite oxide ferroelectrics have recently generated substantial interest for photovoltaic applications; however, existing materials suffer from excessive electronic band gaps and insufficient electric polarization. The recent resurgence of hybrid perovskite ferroelectrics addresses the aforementioned deficiencies, but they are highly unstable against environmental effects and an inorganic resolution may still be optimal. Here we use first-principles calculations to design a low band gap, planar ferroelectric by leveraging the complexity of layered double perovskite oxides AA$^\prime $BB$^\prime$O$_6$. We exploit A$\ne$A$^\prime$ size mismatch, a nominally empty $d$-shell on the B-site, and A cations bearing lone-pair electrons to achieve a large ferroelectric polarization. Additionally, B$^\prime\ne$B is chosen to achieve full charge transfer and a Mott susceptible filling on the B$^\prime$-site, yielding a low band gap. These principles are illustrated in BaBiCuVO$_6$, BaBiNiVO$_6$, BaLaCuVO$_6$, and PbLaCuVO$_6$, which could be realized in layer-by-layer growth. This new class of materials could lead to stable, high-efficiency photovoltaic.
△ Less
Submitted 29 June, 2015;
originally announced June 2015.
-
Density functional versus spin-density functional and the choice of correlated subspace in multi-variable effective action theories of electronic structure
Authors:
Hyowon Park,
Andrew J. Millis,
Chris A. Marianetti
Abstract:
Modern extensions of density functional theory such as the density functional theory plus U and the density functional theory plus dynamical mean-field theory require choices, including selection of variable (charge vs spin density) for the density functional and specification of the correlated subspace. This paper examines these issues in the context of the "plus U" extensions of density function…
▽ More
Modern extensions of density functional theory such as the density functional theory plus U and the density functional theory plus dynamical mean-field theory require choices, including selection of variable (charge vs spin density) for the density functional and specification of the correlated subspace. This paper examines these issues in the context of the "plus U" extensions of density functional theory, in which additional correlations on specified correlated orbitals are treated using a Hartree-Fock approximation. Differences between using charge-only or spin-density-dependent exchange-correlation functionals and between Wannier and projector-based definitions of the correlated orbitals are considered on the formal level and in the context of the structural energetics of the rare earth nickelates. It is demonstrated that theories based on spin-dependent exchange-correlation functionals can lead to large and in some cases unphysical effective on-site exchange couplings. Wannier and projector-based definitions of the correlated orbitals lead to similar behavior near ambient pressure, but substantial differences are observed at large pressures. Implications for other beyond density functional methods such as the combination of density functional and dynamical mean field theory are discussed.
△ Less
Submitted 1 May, 2015;
originally announced May 2015.
-
Density Functional plus Dynamical Mean-Field Theory of the Spin-Crossover Molecule Fe(phen)$_2$(NCS)$_2$
Authors:
Jia Chen,
Andrew Millis,
Chris Marianetti
Abstract:
We study the spin-crossover molecule Fe(phen)$_2$(NCS)$_2$ using density functional theory (DFT) plus dynamical mean-field theory, which allows access to observables not attainable with traditional quantum chemical or electronic structure methods. The temperature dependent magnetic susceptibility, electron addition and removal spectra, and total energies are calculated and compared to experiment.…
▽ More
We study the spin-crossover molecule Fe(phen)$_2$(NCS)$_2$ using density functional theory (DFT) plus dynamical mean-field theory, which allows access to observables not attainable with traditional quantum chemical or electronic structure methods. The temperature dependent magnetic susceptibility, electron addition and removal spectra, and total energies are calculated and compared to experiment. We demonstrate that the proper quantitative energy difference between the high-spin and low-spin state, as well as reasonably accurate values of the magnetic susceptibility can be obtained when using realistic interaction parameters. Comparisons to DFT and DFT+U calculations demonstrate that dynamical correlations are critical to the energetics of the low-spin state. Additionally, we elucidate the differences between DFT+U and spin density functional theory (SDFT) plus U methodologies, demonstrating that DFT+U can recover SDFT+U results for an appropriately chosen on-site exchange interaction.
△ Less
Submitted 11 March, 2015;
originally announced March 2015.
-
Origin of Spinel Nanocheckerboards via First Principles
Authors:
Mordechai Kornbluth,
Chris Marianetti
Abstract:
Self-organizing nanocheckerboards have been experimentally fabricated in Mn-based spinels, but have not yet been explained with first principles. Using density-functional-theory, we explain the phase diagram of the $\mathrm{ZnMn_xGa_{2-x}O_4}$ system and the origin of nanocheckerboards. We predict total phase separation at zero temperature, then show the combination of kinetics, thermodynamics, an…
▽ More
Self-organizing nanocheckerboards have been experimentally fabricated in Mn-based spinels, but have not yet been explained with first principles. Using density-functional-theory, we explain the phase diagram of the $\mathrm{ZnMn_xGa_{2-x}O_4}$ system and the origin of nanocheckerboards. We predict total phase separation at zero temperature, then show the combination of kinetics, thermodynamics, and Jahn-Teller physics that generates the system's observed behavior. We find the {011} surfaces are strongly-preferred energetically, which mandates checkerboard ordering by purely geometrical considerations.
△ Less
Submitted 14 January, 2015;
originally announced January 2015.
-
Computing total energies in complex materials using charge self-consistent DFT+DMFT
Authors:
Hyowon Park,
Andrew J. Millis,
Chris A. Marianetti
Abstract:
We have formulated and implemented a fully charge-self-consistent density functional theory plus dynamical mean field theory methodology which enables an efficient calculation of the total energy of realistic correlated electron systems. The density functional portion of the calculation uses a plane wave basis set within the projector augmented wave method enabling study of systems with large, com…
▽ More
We have formulated and implemented a fully charge-self-consistent density functional theory plus dynamical mean field theory methodology which enables an efficient calculation of the total energy of realistic correlated electron systems. The density functional portion of the calculation uses a plane wave basis set within the projector augmented wave method enabling study of systems with large, complex unit cells. The dynamical mean field portion of the calculation is formulated using maximally localized Wannier functions, enabling a convenient implementation which is independent of the basis set used in the density functional portion of the calculation. The importance of using a correct double counting term is demonstrated. A generalized form of the standard double counting correction, which we refer to as the $U^\prime$ form, is described in detail and used. For comparison the density functional plus U method is implemented within the same framework including the generalized double counting. The formalism is validated via a calculation of the metal-insulator and structural phase diagrams of the rare-earth nickelate perovskites as functions of applied pressure and A-site rare-earth ions. The calculated density functional plus dynamical mean field results are found to be consistent with experiment. The density functional plus U method is shown to grossly overestimate the tendency for bond-disproportionation and insulating behavior.
△ Less
Submitted 14 September, 2014;
originally announced September 2014.
-
Charge transfer across transition metal oxide interfaces: emergent conductance and new electronic structure
Authors:
Hanghui Chen,
Hyowon Park,
Andrew J. Millis,
Chris A. Marianetti
Abstract:
We perform density functional theory plus dynamical mean field theory calculations to investi- gate internal charge transfer in an artificial superlattice composed of alternating layers of vanadate and manganite perovskite and Ruddlesden-Popper structure materials. We show that the elec- tronegativity difference between vanadium and manganese causes moderate charge transfer from VO2 to MnO2 layers…
▽ More
We perform density functional theory plus dynamical mean field theory calculations to investi- gate internal charge transfer in an artificial superlattice composed of alternating layers of vanadate and manganite perovskite and Ruddlesden-Popper structure materials. We show that the elec- tronegativity difference between vanadium and manganese causes moderate charge transfer from VO2 to MnO2 layers in both perovskite and Ruddlesden-Popper based superlattices, leading to hole do** of the VO2 layer and electron do** of the MnO2 layer. Comparison of the perovskite and Ruddlesden-Popper based heterostructures provides insights into the role of the apical oxy- gen. Our first principles simulations demonstrate that the combination of internal charge transfer and quantum confinement provided by heterostructuring is a powerful approach to engineering electronic structure and tailoring correlation effects in transition metal oxides.
△ Less
Submitted 2 January, 2015; v1 submitted 1 August, 2014;
originally announced August 2014.
-
Density functional plus dynamical mean field theory of the metal-insulator transition in early transition metal oxides
Authors:
Hung T. Dang,
Xinyuan Ai,
Andrew J. Millis,
Chris A. Marianetti
Abstract:
The combination of density functional theory and single-site dynamical mean-field theory, using both Hartree and full continuous-time quantum Monte Carlo impurity solvers, is used to study the metal-insulator phase diagram of perovskite transition-metal oxides of the form $AB$O$_3$ with a rare-earth ion $A$=Sr, La, Y and transition metal $B$=Ti, V, Cr. The correlated subspace is constructed from a…
▽ More
The combination of density functional theory and single-site dynamical mean-field theory, using both Hartree and full continuous-time quantum Monte Carlo impurity solvers, is used to study the metal-insulator phase diagram of perovskite transition-metal oxides of the form $AB$O$_3$ with a rare-earth ion $A$=Sr, La, Y and transition metal $B$=Ti, V, Cr. The correlated subspace is constructed from atomiclike $d$ orbitals defined using maximally localized Wannier functions derived from the full $p$-$d$ manifold; for comparison, results obtained using a projector method are also given. Paramagnetic DFT+DMFT computations using full charge self-consistency along with the standard "fully localized limit" (FLL) double counting are shown to incorrectly predict that LaTiO$_3$, YTiO$_3$, LaVO$_3$ and SrMnO$_3$ are metals. A more general examination of the dependence of physical properties on the mean $p$-$d$ energy splitting, the occupancy of the correlated $d$ states, the double-counting correction, and the lattice structure demonstrates the importance of charge-transfer physics even in the early transition-metal oxides and elucidates the factors underlying the failure of the standard approximations. If the double counting is chosen to produce a $p$-$d$ splitting consistent with experimental spectra, single-site dynamical mean-field theory provides a reasonable account of the materials properties. The relation of the results to those obtained from "$d$-only" models in which the correlation problem is based on the frontier orbital $p$-$d$ antibonding bands is determined. It is found that if an effective interaction $U$ is properly chosen the $d$-only model provides a good account of the physics of the $d^1$ and $d^2$ materials.
△ Less
Submitted 24 September, 2014; v1 submitted 24 July, 2014;
originally announced July 2014.
-
Selectively Localized Wannier Functions
Authors:
Runzhi Wang,
Emanuel A. Lazar,
Hyowon Park,
Andrew J. Millis,
Chris A. Marianetti
Abstract:
Since the seminal work of Marzari and Vanderbilt, maximally localized Wannier functions have become widely used as a real-space representation of the electronic structure of periodic materials. In this paper we introduce selectively localized Wannier functions which extend the method of Marzari and Vanderbilt in two important ways. First, our method allows us to focus on localizing a subset of orb…
▽ More
Since the seminal work of Marzari and Vanderbilt, maximally localized Wannier functions have become widely used as a real-space representation of the electronic structure of periodic materials. In this paper we introduce selectively localized Wannier functions which extend the method of Marzari and Vanderbilt in two important ways. First, our method allows us to focus on localizing a subset of orbitals of interest. Second, our method allows us to fix centers of these orbitals, and ensure the preservation of the point-group symmetry. These characteristics are important when Wannier functions are used in methodologies that go beyond density functional theory by treating a local subspace of the Hamiltonian more effectively. Application of our method to GaAs, SrMnO$_3$, and Co demonstrates that selectively localized Wannier functions can offer improvements over the maximally localized Wannier function technique.
△ Less
Submitted 18 July, 2014;
originally announced July 2014.
-
A slave mode expansion for obtaining ab-initio interatomic potentials
Authors:
Xinyuan Ai,
Yue Chen,
Chris A. Marianetti
Abstract:
Here we propose a new approach for performing a Taylor series expansion of the first-principles computed energy of a crystal as a function of the nuclear displacements. We enlarge the dimensionality of the existing displacement space and form new variables (ie. slave modes) which transform like irreducible representations of the space group and satisfy homogeneity of free space. Standard group the…
▽ More
Here we propose a new approach for performing a Taylor series expansion of the first-principles computed energy of a crystal as a function of the nuclear displacements. We enlarge the dimensionality of the existing displacement space and form new variables (ie. slave modes) which transform like irreducible representations of the space group and satisfy homogeneity of free space. Standard group theoretical techniques can then be applied to deduce the non-zero expansion coefficients a priori. At a given order, the translation group can be used to contract the products and eliminate terms which are not linearly independent, resulting in a final set of slave mode products. While the expansion coefficients can be computed in a variety of ways, we demonstrate that finite difference is effective up to fourth order. We demonstrate the power of the method in the strongly anharmonic system PbTe. All anharmonic terms within an octahedron are computed up to fourth order. A proper unitary transformation demonstrates that the vast majority of the anharmonicity can be attributed to just two terms, indicating that a minimal model of phonon interactions is achievable. The ability to straightforwardly generate polynomial potentials will allow precise simulations at length and time scales which were previously unrealizable.
△ Less
Submitted 10 January, 2014;
originally announced January 2014.
-
Three Dimensional Metallic and Two Dimensional Insulating Behavior in Tantalum Dichalcogenides
Authors:
Pierre Darancet,
Andrew J. Millis,
Chris A. Marianetti
Abstract:
Using density functional theory with added on-site interactions (DFT+U), we study the electronic structure of bulk, monolayer, and bilayer of the layered transition-metal dichalcogenide $1T-TaS_2$. We show that a two-dimensional spin--$\frac{1}{2}$ Mott-phase exists for the monolayer in the charge-density wave state (CDW) and that such a phase is systematically destroyed by packing of the distorte…
▽ More
Using density functional theory with added on-site interactions (DFT+U), we study the electronic structure of bulk, monolayer, and bilayer of the layered transition-metal dichalcogenide $1T-TaS_2$. We show that a two-dimensional spin--$\frac{1}{2}$ Mott-phase exists for the monolayer in the charge-density wave state (CDW) and that such a phase is systematically destroyed by packing of the distorted layers leading to a one dimensional metal for bulk, CDW-distorted TaS$_2$. The latter finding is in contrast with previous DMFT predictions --disagreement we explain by the weak effective interaction felt by the electrons in the CDW state. Experimental observations of insulating behavior may arise from disorder due to stacking faults.
△ Less
Submitted 31 December, 2013;
originally announced January 2014.
-
A first-principles approach to nonlinear lattice dynamics: Anomalous spectra in PbTe
Authors:
Yue Chen,
Xinyuan Ai,
C. A. Marianetti
Abstract:
Here we introduce a new approach to compute the finite temperature lattice dynamics from first-principles via the newly developed slave mode expansion. We study PbTe where inelastic neutron scattering (INS) reveals strong signatures of nonlinearity as evidenced by anomalous features which emerge in the phonon spectra at finite temperature. Using our slave mode expansion in the classical limit, we…
▽ More
Here we introduce a new approach to compute the finite temperature lattice dynamics from first-principles via the newly developed slave mode expansion. We study PbTe where inelastic neutron scattering (INS) reveals strong signatures of nonlinearity as evidenced by anomalous features which emerge in the phonon spectra at finite temperature. Using our slave mode expansion in the classical limit, we compute the vibrational spectra and show remarkable agreement with temperature dependent INS measurements. Furthermore, we resolve experimental controversy by showing that there are no appreciable local nor global spontaneously broken symmetries at finite temperature and that the anomalous spectral features simply arise from two anharmonic interactions. Our approach should be broadly applicable across the periodic table.
△ Less
Submitted 20 December, 2013;
originally announced December 2013.
-
The failure of DFT-based computations for a stepped-substrate-supported correlated Co wire
Authors:
Nader Zaki,
Hyowon Park,
Richard M. Osgood,
Andrew J. Millis,
Chris A. Marianetti
Abstract:
Density functional theory (DFT) has been immensely successful in its ability to predict physical properties, and, in particular, structures of condensed matter systems. Here, however, we show that DFT qualitatively fails to predict the dimerized structural phase for a monatomic Co wire that is self-assembled on a vicinal, i.e. stepped, Cu(111) substrate. To elucidate the nature of this failure, we…
▽ More
Density functional theory (DFT) has been immensely successful in its ability to predict physical properties, and, in particular, structures of condensed matter systems. Here, however, we show that DFT qualitatively fails to predict the dimerized structural phase for a monatomic Co wire that is self-assembled on a vicinal, i.e. stepped, Cu(111) substrate. To elucidate the nature of this failure, we compute the energetics of a Co chain on a Cu surface, step, notch, and embedded in bulk. The results demonstrate that increasing Co coordination extinguishes the dimerization, indicating that the failure of DFT for Co on the Cu step arises from excessive hybridization, which both weakens the ferromagnetic correlations that drive the dimerization and increases the bonding that opposes dimerization. Additionally, we show that including local interactions via DFT+U or DFT+DMFT does not restore the dimerization for the step-substrate supported wire, though the Co wire does dimerize in DFT+DMFT for the isolated vacuum case. This system can serve as a benchmark for future electronic structure methods.
△ Less
Submitted 5 December, 2013;
originally announced December 2013.
-
Ideal strength and phonon instability of strained monolayer materials
Authors:
Eric B. Isaacs,
Chris A. Marianetti
Abstract:
The ideal strength of monolayer materials possessing semimetallic, semiconducting, and insulating ground states is computed using density functional theory. Here we show that, as in graphene, a soft mode occurs at the K-point in BN, graphane, and MoS$_2$, while not in silicene. The transition is first-order in all cases except graphene. In BN and graphane the soft mode corresponds to a Kekul{é}-li…
▽ More
The ideal strength of monolayer materials possessing semimetallic, semiconducting, and insulating ground states is computed using density functional theory. Here we show that, as in graphene, a soft mode occurs at the K-point in BN, graphane, and MoS$_2$, while not in silicene. The transition is first-order in all cases except graphene. In BN and graphane the soft mode corresponds to a Kekul{é}-like distortion similar to that of graphene, while MoS$_2$ has a distinct distortion. The phase transitions for BN, graphane, and MoS$_2$ are not associated with the opening of a band gap, which indicates that Fermi surface nesting is not the driving force. We perform an energy decomposition that demonstrates why the soft modes at the K-point are unique and how strain drives the phonon instability.
△ Less
Submitted 6 November, 2013;
originally announced November 2013.
-
Total energy calculations using DFT+DMFT: computing the pressure phase diagram of the rare earth nickelates
Authors:
Hyowon Park,
Andrew J. Millis,
Chris A. Marianetti
Abstract:
A full implementation of the $ab$ $initio$ density functional plus dynamical mean field theory (DFT+DMFT) formalism to perform total energy calculations and structural relaxations is proposed and implemented. The method is applied to the structural and metal-insulator transitions of the rare earth nickelate perovskites as a function of rare earth ion, pressure, and temperature. In contrast to prev…
▽ More
A full implementation of the $ab$ $initio$ density functional plus dynamical mean field theory (DFT+DMFT) formalism to perform total energy calculations and structural relaxations is proposed and implemented. The method is applied to the structural and metal-insulator transitions of the rare earth nickelate perovskites as a function of rare earth ion, pressure, and temperature. In contrast to previous DFT and DFT+$U$ theories, the present method accounts for the experimentally observed structure of $La$NiO$_3$ and the insulating nature of the other perovskites, and quantitatively reproduces the metal-insulator and structural phase diagram in the plane of pressure and rare earth element. The temperature dependence of the energetics of the phase transformation indicates that the thermal transition is driven by phonon entropy effects.
△ Less
Submitted 14 September, 2014; v1 submitted 21 October, 2013;
originally announced October 2013.
-
Covalency and the metal-insulator transition in titanate and vanadate perovskites
Authors:
Hung T. Dang,
Andrew J. Millis,
Chris A. Marianetti
Abstract:
A combination of density functional and dynamical mean-field theory is applied to the perovskites SrVO$_3$, LaTiO$_3$ and LaVO$_3$. We show that DFT+DMFT in conjunction with the standard fully localized-limit (FLL) double-counting predicts that LaTiO$_3$ and LaVO$_3$ are metals even though experimentally they are correlation-driven ("Mott") insulators. In addition, the FLL double counting implies…
▽ More
A combination of density functional and dynamical mean-field theory is applied to the perovskites SrVO$_3$, LaTiO$_3$ and LaVO$_3$. We show that DFT+DMFT in conjunction with the standard fully localized-limit (FLL) double-counting predicts that LaTiO$_3$ and LaVO$_3$ are metals even though experimentally they are correlation-driven ("Mott") insulators. In addition, the FLL double counting implies a splitting between oxygen $p$ and transition metal $d$ levels which differs from experiment. Introducing into the theory an \textit{ad hoc} double counting correction which reproduces the experimentally measured insulating gap leads also to a $p$-$d$ splitting consistent with experiment if the on-site interaction $U$ is chosen in a relatively narrow range ($\sim 6\pm 1$ eV). The results indicate that these early transition metal oxides will serve as critical test for the formulation of a general \textit{ab initio} theory of correlated electron metals.
△ Less
Submitted 22 April, 2014; v1 submitted 11 September, 2013;
originally announced September 2013.
-
Engineering Correlation Effects via Artificially Designed Oxide Superlattices
Authors:
Hanghui Chen,
Chris A. Marianetti,
Andrew J. Millis
Abstract:
Ab initio calculations are used to predict that a superlattice composed of layers of LaTiO3 and LaNiO3 alternating along the [001] direction is a S=1 Mott insulator with large magnetic moments on the Ni sites, negligible moments on the Ti sites and a charge transfer gap set by the energy difference between Ni d and Ti d states, distinct from conventional Mott insulators. Correlation effects are en…
▽ More
Ab initio calculations are used to predict that a superlattice composed of layers of LaTiO3 and LaNiO3 alternating along the [001] direction is a S=1 Mott insulator with large magnetic moments on the Ni sites, negligible moments on the Ti sites and a charge transfer gap set by the energy difference between Ni d and Ti d states, distinct from conventional Mott insulators. Correlation effects are enhanced on the Ni sites via filling the oxygen p states and reducing the Ni-O-Ni bond angle. Small hole (electron) do** of the superlattice leads to a two-dimensional single-band situation with holes (electrons) residing on Ni dx2-y2 (Ti dxy) orbital and coupled to antiferromagnetically correlated spins in the NiO2 layer.
△ Less
Submitted 29 April, 2013;
originally announced April 2013.
-
Spin-exchange-induced dimerization of an atomic 1-D system
Authors:
Nader Zaki,
Chris A. Marianetti,
Danda P. Acharya,
Percy Zahl,
Peter Sutter,
Junichi Okamoto,
Peter D. Johnson,
Andrew J. Millis,
Richard M. Osgood
Abstract:
Using low-temperature scanning tunneling microscopy, we demonstrate an unambiguous 1-D system that surprisingly undergoes a CDW instability on a metallic substrate. Our ability to directly and quantitatively measure the structural distortion of this system provides an accurate reference for comparison with first principles theory. In comparison to previously proposed physical mechanisms, we attrib…
▽ More
Using low-temperature scanning tunneling microscopy, we demonstrate an unambiguous 1-D system that surprisingly undergoes a CDW instability on a metallic substrate. Our ability to directly and quantitatively measure the structural distortion of this system provides an accurate reference for comparison with first principles theory. In comparison to previously proposed physical mechanisms, we attribute this particular 1-D CDW instability to a ferromagnetic state. We show that though the linear arrayed dimers are not electronically isolated, they are magnetically independent, and hence can potentially serve as a binary spin-memory system.
△ Less
Submitted 2 August, 2012;
originally announced August 2012.
-
Site-selective Mott transition in rare earth nickelates
Authors:
Hyowon Park,
Andrew J. Millis,
Chris A. Marianetti
Abstract:
A combination of density functional and dynamical mean field theory calculations are used to show that the remarkable metal-insulator transition in the rare earth nickelate perovskites arise from a site-selective Mott phase, in which the $d$-electrons on a half of the Ni ions are localized to form a fluctuating moment while the $d$-electrons on other Ni ions form a singlet with holes on the surrou…
▽ More
A combination of density functional and dynamical mean field theory calculations are used to show that the remarkable metal-insulator transition in the rare earth nickelate perovskites arise from a site-selective Mott phase, in which the $d$-electrons on a half of the Ni ions are localized to form a fluctuating moment while the $d$-electrons on other Ni ions form a singlet with holes on the surrounding oxygen ions. The calculation reproduces key features observed in the nickelate materials, including an insulating gap in the paramagnetic state, a strong variation of static magnetic moments among Ni sites and an absence of "charge order". A connection between structure and insulating behavior is documented. The site-selective Mott transition may be a more broadly applicable concept in the description of correlated materials.
△ Less
Submitted 13 June, 2012;
originally announced June 2012.
-
Covalency, double-counting and the metal-insulator phase diagram in transition metal oxides
Authors:
Xin Wang,
M. J. Han,
Luca de' Medici,
Hyowon Park,
C. A. Marianetti,
Andrew J. Millis
Abstract:
Dynamical mean field theory calculations are used to show that for late transition-metal-oxides a critical variable for the Mott/charge-transfer transition is the number of d-electrons, which is determined by charge transfer from oxygen ions. Insulating behavior is found only for a narrow range of d-occupancy, irrespective of the size of the intra-d Coulomb repulsion. The result is useful in inter…
▽ More
Dynamical mean field theory calculations are used to show that for late transition-metal-oxides a critical variable for the Mott/charge-transfer transition is the number of d-electrons, which is determined by charge transfer from oxygen ions. Insulating behavior is found only for a narrow range of d-occupancy, irrespective of the size of the intra-d Coulomb repulsion. The result is useful in interpreting 'density functional +U' and 'density functional plus dynamical mean field' methods in which additional correlations are applied to a specific set of orbitals and an important role is played by the 'double counting correction' which dictates the occupancy of these correlated orbitals. General considerations are presented and are illustrated by calculations for two representative transition metal oxide systems: layered perovskite Cu-based "high-Tc" materials, an orbitally non-degenerate electronically quasi-two dimensional systems, and pseudocubic rare earch nickelates, an orbitally degenerate electronically three dimensional system. Density functional calculations yield d-occupancies very far from the Mott metal-insulator phase boundary in the nickelate materials, but closer to it in the cuprates, indicating the sensitivity of theoretical models of the cuprates to the choice of double counting correction and corroborating the critical role of lattice distortions in attaining the experimentally observed insulating phase in the nickelates.
△ Less
Submitted 1 November, 2012; v1 submitted 12 October, 2011;
originally announced October 2011.
-
Dynamical Mean Field Theory of Nickelate Superlattices
Authors:
M. J. Han,
X. Wang,
C. A. Marianetti,
A. J. Millis
Abstract:
Dynamical mean field methods are used to calculate the phase diagram, many-body density of states, relative orbital occupancy and Fermi surface shape for a realistic model of $LaNiO_3$-based superlattices. The model is derived from density functional band calculations and includes oxygen orbitals. The combination of the on-site Hunds interaction and charge-transfer between the transition metal and…
▽ More
Dynamical mean field methods are used to calculate the phase diagram, many-body density of states, relative orbital occupancy and Fermi surface shape for a realistic model of $LaNiO_3$-based superlattices. The model is derived from density functional band calculations and includes oxygen orbitals. The combination of the on-site Hunds interaction and charge-transfer between the transition metal and the oxygen orbitals is found to reduce the orbital polarization far below the levels predicted either by band structure calculations or by many-body analyses of Hubbard-type models which do not explicitly include the oxygen orbitals. The findings indicate that heterostructuring is unlikely to produce one band model physics and demonstrate the fundamental inadequacy of modeling the physics of late transition metal oxides with Hubbard-like models.
△ Less
Submitted 7 April, 2013; v1 submitted 29 April, 2011;
originally announced May 2011.