-
Overview on electrical issues faced during the SPIDER experimental campaigns
Authors:
Alberto Maistrello,
Matteo Agostini,
Marco Bigi,
Matteo Brombin,
Mattia Dan,
Riccardo Casagrande,
Marco De Nardi,
Alberto Ferro,
Elena Gaio,
Palak Jain,
Francesco Lunardon,
Nicolò Marconato,
Diego Marcuzzi,
Mauro Recchia,
Tommaso Patton,
Mauro Pavei,
Francesco Santoro,
Vanni Toigo,
Loris Zanotto,
Marco Barbisan,
Lucio Baseggio,
Marco Bernardi,
Giovanni Berton,
Marco Boldrin,
Samuele Dal Bello
, et al. (17 additional authors not shown)
Abstract:
SPIDER is the full-scale prototype of the ion source of the ITER Heating Neutral Beam Injector, where negative ions of Hydrogen or Deuterium are produced by a RF generated plasma and accelerated with a set of grids up to ~100 keV. The Power Supply System is composed of high voltage dc power supplies capable of handling frequent grid breakdowns, high current dc generators for the magnetic filter fi…
▽ More
SPIDER is the full-scale prototype of the ion source of the ITER Heating Neutral Beam Injector, where negative ions of Hydrogen or Deuterium are produced by a RF generated plasma and accelerated with a set of grids up to ~100 keV. The Power Supply System is composed of high voltage dc power supplies capable of handling frequent grid breakdowns, high current dc generators for the magnetic filter field and RF generators for the plasma generation. During the first 3 years of SPIDER operation different electrical issues were discovered, understood and addressed thanks to deep analyses of the experimental results supported by modelling activities. The paper gives an overview on the observed phenomena and relevant analyses to understand them, on the effectiveness of the short-term modifications provided to SPIDER to face the encountered issues and on the design principle of long-term solutions to be introduced during the currently ongoing long shutdown.
△ Less
Submitted 5 April, 2023;
originally announced April 2023.
-
Lessons learned after three years of SPIDER operation and the first MITICA integrated tests
Authors:
D. Marcuzzi,
V. Toigo,
M. Boldrin,
G. Chitarin,
S. Dal Bello,
L. Grando,
A. Luchetta,
R. Pasqualotto,
M. Pavei,
G. Serianni,
L. Zanotto,
R. Agnello,
P. Agostinetti,
M. Agostini,
D. Aprile,
M. Barbisan,
M. Battistella,
G. Berton,
M. Bigi,
M. Brombin,
V. Candela,
V. Candeloro,
A. Canton,
R. Casagrande,
C. Cavallini
, et al. (117 additional authors not shown)
Abstract:
ITER envisages the use of two heating neutral beam injectors plus an optional one as part of the auxiliary heating and current drive system. The 16.5 MW expected neutral beam power per injector is several notches higher than worldwide existing facilities. A Neutral Beam Test Facility (NBTF) was established at Consorzio RFX, exploiting the synergy of two test beds, SPIDER and MITICA. SPIDER is dedi…
▽ More
ITER envisages the use of two heating neutral beam injectors plus an optional one as part of the auxiliary heating and current drive system. The 16.5 MW expected neutral beam power per injector is several notches higher than worldwide existing facilities. A Neutral Beam Test Facility (NBTF) was established at Consorzio RFX, exploiting the synergy of two test beds, SPIDER and MITICA. SPIDER is dedicated to develo** and characterizing large efficient negative ion sources at relevant parameters in ITER-like conditions: source and accelerator located in the same vacuum where the beam propagates, immunity to electromagnetic interferences of multiple radio-frequency (RF) antennas, avoidance of RF-induced discharges on the outside of the source. Three years of experiments on SPIDER have addressed to the necessary design modifications to enable full performances. The source is presently under a long shut-down phase to incorporate learnings from the experimental campaign. Parallelly, developments on MITICA, the full-scale prototype of the ITER NBI featuring a 1 MV accelerator and ion neutralization, are underway including manufacturing of in-vessel components, while power supplies and auxiliary plants are already under final testing and commissioning. Integration, commissioning and tests of the 1MV power supplies are essential for this first-of-kind system, unparalleled both in research and industry field. The integrated test to confirm 1MV output by combining invertor systems, DC generators and transmission lines extracted errors/accidents in some components. To realize a concrete system for ITER, solutions for the repair and the improvement of the system were developed. Hence, NBTF is emerging as a necessary facility, due to the large gap with existing injectors, effectively dedicated to identify issues and find solutions to enable successful ITER NBI operations in a time bound fashion.
△ Less
Submitted 4 April, 2023;
originally announced April 2023.
-
Measure of negative ion density in a large negative ion source using Langmuir probes
Authors:
Carlo Poggi,
Monica Spolaore,
Marco Barbisan,
Matteo Brombin,
Roberto Cavazzana,
Nicolò Marconato,
Roberto Pasqualotto,
Antonio Pimazzoni,
Emanuele Sartori,
Gianluigi Serianni
Abstract:
Neutral Beam Injectors (NBIs) based on negative ions are the workhorses of future fusion reactors, such as ITER, which they are expected to provide with up to \SI{33}{MW} of power to heat the fusion plasma. The negative hydrogen ions are extracted from a RF plasma, in which a magnetic filter field cools down the electrons reaching the so-called expansion region and allows the formation of negative…
▽ More
Neutral Beam Injectors (NBIs) based on negative ions are the workhorses of future fusion reactors, such as ITER, which they are expected to provide with up to \SI{33}{MW} of power to heat the fusion plasma. The negative hydrogen ions are extracted from a RF plasma, in which a magnetic filter field cools down the electrons reaching the so-called expansion region and allows the formation of negative ions near the apertures in the plasma grid. To further improve the production of negative ions, cesium is usually evaporated inside the source and deposited onto the plasma walls, reducing the work function of the surfaces. This dramatically increases the density of negative hydrogen ions near the surfaces, causing the transition to an electronegative plasma in the vicinity of the plasma grid. This condition can be observed with Langmuir probes, which can then be used to provide a local meaurement of negative ion density in the ion source.
In this paper we use the measurements provided by the Langmuir probe sensors embedded in the plasma grid of SPIDER, the prototype ion source of ITER NBIs, to determine the density of negative ions. A fitting method based on the determination of the collection area of the different plasma species is proposed and adapted to SPIDER experimental condition, taking into account the shape of the probes and the local topology of the magnetic field. The method is then applied to the experimental data, determining the densities of the positive and negative ions and of the electrons during a plasma pulse. Finally, a vertical array of four probes in the plasma grid is used to assess the vertical profile of plasma parameters.
△ Less
Submitted 12 July, 2023; v1 submitted 23 February, 2023;
originally announced February 2023.
