Showing 1–43 of 43 results for author: Marí, R

Yielding is an absorbing phase transition with vanishing critical fluctuations

Authors: Tristan Jocteur, Shana Figueiredo, Kirsten Martens, Eric Bertin, Romain Mari

Abstract: The yielding transition in athermal complex fluids can be interpreted as an absorbing phase transition between an elastic, absorbing state with high mesoscopic degeneracy and a flowing, active state. We characterize quantitatively this phase transition in an elastoplastic model under fixed applied shear stress, using a finite-size scaling analysis. We find vanishing critical fluctuations of the or… ▽ More The yielding transition in athermal complex fluids can be interpreted as an absorbing phase transition between an elastic, absorbing state with high mesoscopic degeneracy and a flowing, active state. We characterize quantitatively this phase transition in an elastoplastic model under fixed applied shear stress, using a finite-size scaling analysis. We find vanishing critical fluctuations of the order parameter (i.e., the shear rate), and relate this property to the convex character of the phase transition ($β>1$). We show explicitly that the CDP class is recovered when both properties are relaxed. We locate yielding within a family of models akin to fixed-energy sandpile (FES) models, only with long-range redistribution kernels with zero-modes that result from mechanical equilibrium. For redistribution kernels with sufficiently fast decay, this family of models belong to a short-range universality class distinct from the Conserved Directed Percolation class of usual FES, which is induced by zero modes. △ Less

Submitted 22 January, 2024; originally announced January 2024.

Comments: 4 pages + Supplementary material

Radar Fields: An Extension of Radiance Fields to SAR

Authors: Thibaud Ehret, Roger Marí, Dawa Derksen, Nicolas Gasnier, Gabriele Facciolo

Abstract: Radiance fields have been a major breakthrough in the field of inverse rendering, novel view synthesis and 3D modeling of complex scenes from multi-view image collections. Since their introduction, it was shown that they could be extended to other modalities such as LiDAR, radio frequencies, X-ray or ultrasound. In this paper, we show that, despite the important difference between optical and synt… ▽ More Radiance fields have been a major breakthrough in the field of inverse rendering, novel view synthesis and 3D modeling of complex scenes from multi-view image collections. Since their introduction, it was shown that they could be extended to other modalities such as LiDAR, radio frequencies, X-ray or ultrasound. In this paper, we show that, despite the important difference between optical and synthetic aperture radar (SAR) image formation models, it is possible to extend radiance fields to radar images thus presenting the first "radar fields". This allows us to learn surface models using only collections of radar images, similar to how regular radiance fields are learned and with the same computational complexity on average. Thanks to similarities in how both fields are defined, this work also shows a potential for hybrid methods combining both optical and SAR images. △ Less

Submitted 20 December, 2023; originally announced December 2023.

Multilevel latent class analysis with covariates: Analysis of cross-national citizenship norms with a two-stage approach

Authors: Roberto Di Mari, Zsuzsa Bakk, Jennifer Oser, Jouni Kuha

Abstract: This paper focuses on the substantive application of multilevel LCA to the evolution of citizenship norms in a diverse array of democratic countries. To do so, we present a two-stage approach to fit multilevel latent class models: in the first stage (measurement model construction), unconditional class enumeration is done separately on both low and high level latent variables, estimating only a pa… ▽ More This paper focuses on the substantive application of multilevel LCA to the evolution of citizenship norms in a diverse array of democratic countries. To do so, we present a two-stage approach to fit multilevel latent class models: in the first stage (measurement model construction), unconditional class enumeration is done separately on both low and high level latent variables, estimating only a part of the model at a time -- hence kee** the remaining part fixed -- and then updating the full measurement model; in the second stage (structural model construction), individual and/or group covariates are included in the model. By separating the two parts -- first stage and second stage of model building -- the measurement model is stabilized and is allowed to be determined only by it's indicators. Moreover, this two-step approach makes the inclusion/exclusion of a covariate a relatively simple task to handle. Our proposal amends common practice in applied social science research, where simple (low-level) LCA is done to obtain a classification of low-level unit, and this is then related to (low- and high-level) covariates simply including group fixed effects. Our analysis identifies latent classes that score either consistently high or consistently low on all measured items, along with two theoretically important classes that place distinctive emphasis on items related to engaged citizenship, and duty-based norms. △ Less

Submitted 20 July, 2023; originally announced July 2023.

multilevLCA: An R Package for Single-Level and Multilevel Latent Class Analysis with Covariates

Authors: Johan Lyrvall, Roberto Di Mari, Zsuzsa Bakk, Jennifer Oser, Jouni Kuha

Abstract: This contribution presents a guide to the R package multilevLCA, which offers a complete and innovative set of technical tools for the latent class analysis of single-level and multilevel categorical data. We describe the available model specifications, mainly falling within the fixed-effect or random-effect approaches. Maximum likelihood estimation of the model parameters, enhanced by a refined i… ▽ More This contribution presents a guide to the R package multilevLCA, which offers a complete and innovative set of technical tools for the latent class analysis of single-level and multilevel categorical data. We describe the available model specifications, mainly falling within the fixed-effect or random-effect approaches. Maximum likelihood estimation of the model parameters, enhanced by a refined initialization strategy, is implemented either simultaneously, i.e., in one-step, or by means of the more advantageous two-step estimator. The package features i) semi-automatic model selection when a priori information on the number of classes is lacking, ii) predictors of class membership, and iii) output visualization tools for any of the available model specifications. All functionalities are illustrated by means of a real application on citizenship norms data, which are available in the package. △ Less

Submitted 10 April, 2024; v1 submitted 12 May, 2023; originally announced May 2023.

A two-step estimator for multilevel latent class analysis with covariates

Authors: Roberto Di Mari, Zsuzsa Bakk, Jennifer Oser, Jouni Kuha

Abstract: We propose a two-step estimator for multilevel latent class analysis (LCA) with covariates. The measurement model for observed items is estimated in its first step, and in the second step covariates are added in the model, kee** the measurement model parameters fixed. We discuss model identification, and derive an Expectation Maximization algorithm for efficient implementation of the estimator.… ▽ More We propose a two-step estimator for multilevel latent class analysis (LCA) with covariates. The measurement model for observed items is estimated in its first step, and in the second step covariates are added in the model, kee** the measurement model parameters fixed. We discuss model identification, and derive an Expectation Maximization algorithm for efficient implementation of the estimator. By means of an extensive simulation study we show that (i) this approach performs similarly to existing stepwise estimators for multilevel LCA but with much reduced computing time, and (ii) it yields approximately unbiased parameter estimates with a negligible loss of efficiency compared to the one-step estimator. The proposal is illustrated with a cross-national analysis of predictors of citizenship norms. △ Less

Submitted 5 July, 2023; v1 submitted 10 March, 2023; originally announced March 2023.

Comments: Manuscript version accepted for publication in Psychometrika

Microscopically grounded constitutive model for dense suspensions of soft particles below jamming

Authors: N. Cuny, E. Bertin, R. Mari

Abstract: We derive from particle-level dynamics a constitutive model describing the rheology of two-dimensional dense soft suspensions below the jamming transition, in a regime where hydrodynamic interactions between particles are screened. Based on a statistical description of particle dynamics, we obtain through a set of physically plausible approximations a non-linear tensorial evolution equation for th… ▽ More We derive from particle-level dynamics a constitutive model describing the rheology of two-dimensional dense soft suspensions below the jamming transition, in a regime where hydrodynamic interactions between particles are screened. Based on a statistical description of particle dynamics, we obtain through a set of physically plausible approximations a non-linear tensorial evolution equation for the deviatoric part of the stress tensor, involving the strain-rate and vorticity tensors. This tensorial evolution equation involves singular terms usually not taken into account in phenomenological constitutive models, which most often assume a regular expansion in terms of the stress tensor. All coefficients appearing in the equation have known expressions in terms of the microscopic parameters of the model. The predictions of this microscopically grounded constitutive model have several qualitative features that are specific to the rheology of soft suspensions measured in experiments or simulations. The model shows a typical behavior of polymeric visco-elastic materials, such as normal stress differences quadratic in the shear rate $\dotγ$, as well as typical behaviors of suspensions of stiff particles, such as a particle pressure linear in $\dotγ$ and a zero-shear viscosity diverging at the jamming transition. The model also predicts a sharper shear thinning than other visco-elastic models at small shear rates, in qualitative agreement with experimental observations. Furthermore the shear thinning follows a critical scaling close to the jamming transition. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Comments: 19 pages, 7 figures

Rheology of dense suspensions under shear rotation

Authors: Frédéric Blanc, François Peters, Jurriaan J. J. Gillissen, Michael E. Cates, Sandra Bosio, Camille Benarroche, Romain Mari

Abstract: Dense non-Brownian suspensions exhibit a spectacular and abrupt drop in viscosity under change of shear direction, as revealed by shear inversions (reversals) or orthogonal superposition. Here, we introduce an experimental setup to systematically explore their response to shear rotations, where one suddenly rotates the principal axes of shear by an angle $θ$, and measure the shear stresses with a… ▽ More Dense non-Brownian suspensions exhibit a spectacular and abrupt drop in viscosity under change of shear direction, as revealed by shear inversions (reversals) or orthogonal superposition. Here, we introduce an experimental setup to systematically explore their response to shear rotations, where one suddenly rotates the principal axes of shear by an angle $θ$, and measure the shear stresses with a bi-axial force sensor. Our measurements confirm the genericness of the transient decrease of the resistance to shear under unsteady conditions. Moreover, the orthogonal shear stress, which vanishes in steady state, takes non-negligible values with a rich $θ$-dependence, changing qualitatively with solid volume fraction $φ$, and resulting in a force that tends to reduce or enhance the direction of flow for small or large $φ$. These experimental findings are confirmed and rationalized by particle-based numerical simulations and a recently proposed constitutive model. We show that the rotation angle dependence of the orthogonal stress results from a $φ$-dependent interplay between hydrodynamic and contact stresses. △ Less

Submitted 24 May, 2023; v1 submitted 5 December, 2022; originally announced December 2022.

Comments: Accepted in Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 130, 118202 (2023)

Regularization of NeRFs using differential geometry

Authors: Thibaud Ehret, Roger Marí, Gabriele Facciolo

Abstract: Neural radiance fields, or NeRF, represent a breakthrough in the field of novel view synthesis and 3D modeling of complex scenes from multi-view image collections. Numerous recent works have shown the importance of making NeRF models more robust, by means of regularization, in order to train with possibly inconsistent and/or very sparse data. In this work, we explore how differential geometry can… ▽ More Neural radiance fields, or NeRF, represent a breakthrough in the field of novel view synthesis and 3D modeling of complex scenes from multi-view image collections. Numerous recent works have shown the importance of making NeRF models more robust, by means of regularization, in order to train with possibly inconsistent and/or very sparse data. In this work, we explore how differential geometry can provide elegant regularization tools for robustly training NeRF-like models, which are modified so as to represent continuous and infinitely differentiable functions. In particular, we present a generic framework for regularizing different types of NeRFs observations to improve the performance in challenging conditions. We also show how the same formalism can also be used to natively encourage the regularity of surfaces by means of Gaussian or mean curvatures. △ Less

Submitted 30 November, 2022; v1 submitted 29 June, 2022; originally announced June 2022.

Sat-NeRF: Learning Multi-View Satellite Photogrammetry With Transient Objects and Shadow Modeling Using RPC Cameras

Authors: Roger Marí, Gabriele Facciolo, Thibaud Ehret

Abstract: We introduce the Satellite Neural Radiance Field (Sat-NeRF), a new end-to-end model for learning multi-view satellite photogrammetry in the wild. Sat-NeRF combines some of the latest trends in neural rendering with native satellite camera models, represented by rational polynomial coefficient (RPC) functions. The proposed method renders new views and infers surface models of similar quality to tho… ▽ More We introduce the Satellite Neural Radiance Field (Sat-NeRF), a new end-to-end model for learning multi-view satellite photogrammetry in the wild. Sat-NeRF combines some of the latest trends in neural rendering with native satellite camera models, represented by rational polynomial coefficient (RPC) functions. The proposed method renders new views and infers surface models of similar quality to those obtained with traditional state-of-the-art stereo pipelines. Multi-date images exhibit significant changes in appearance, mainly due to varying shadows and transient objects (cars, vegetation). Robustness to these challenges is achieved by a shadow-aware irradiance model and uncertainty weighting to deal with transient phenomena that cannot be explained by the position of the sun. We evaluate Sat-NeRF using WorldView-3 images from different locations and stress the advantages of applying a bundle adjustment to the satellite camera models prior to training. This boosts the network performance and can optionally be used to extract additional cues for depth supervision. △ Less

Submitted 21 April, 2022; v1 submitted 16 March, 2022; originally announced March 2022.

Comments: Accepted at CVPR EarthVision Workshop 2022

Transient flows and migration in granular suspensions: key role of Reynolds-like dilatancy

Authors: Shivakumar Athani, Bloen Metzger, Yoel Forterre, Romain Mari

Abstract: We investigate the transient dynamics of a sheared suspension of neutrally buoyant particles under pressure-imposed conditions, subject to a sudden change in shear rate or external pressure. Discrete Element Method simulations show that, depending on the flow parameters (particle and system size, initial volume fraction), the early stress response of the suspension may strongly differ from the pre… ▽ More We investigate the transient dynamics of a sheared suspension of neutrally buoyant particles under pressure-imposed conditions, subject to a sudden change in shear rate or external pressure. Discrete Element Method simulations show that, depending on the flow parameters (particle and system size, initial volume fraction), the early stress response of the suspension may strongly differ from the prediction of the Suspension Balance Model based on the steady-state rheology. We show that a two-phase model incorporating the Reynolds-like dilatancy law of Pailha & Pouliquen (2009), which prescribes the dilation rate of the suspension over a strain scale $γ_0$, quantitatively captures the suspension dilation/compaction over the whole range of parameters investigated. Together with the Darcy flow induced by the pore pressure gradient during dilation or compaction, this Reynolds-like dilatancy implies that the early stress response of the suspension is nonlocal, with a nonlocal length scale $\ell$ which scales with the particle size and diverges algebraically at jamming. In regions affected by $\ell$, the stress level is fixed, not by the steady-state rheology, but by the Darcy fluid pressure gradient resulting from the dilation/compaction rate. Our results extend the validity of the Reynolds-like dilatancy flow rule, initially proposed for jammed suspensions, to flowing suspension below $φ_\mathrm{c}$, thereby providing a unified framework to describe dilation and shear-induced migration. They pave the way for understanding more complex unsteady flows of dense suspensions, such as impacts, transient avalanches or the impulsive response of shear-thickening suspensions. △ Less

Submitted 5 October, 2021; originally announced October 2021.

Comments: 24 pages, 9 figures

Dynamics of microstructure anisotropy and rheology of soft jammed suspensions

Authors: Nicolas Cuny, Éric Bertin, Romain Mari

Abstract: We explore the rheology predicted by a recently proposed constitutive model for jammed suspensions of soft elastic particles derived from particle-level dynamics [Cuny et al., Phys. Rev. Lett. 127, 218003 (2021)]. Our model predicts that the orientation of the anisotropy of the microstructure, governed by an interplay between advection and contact elasticity, plays a key role at yielding and in fl… ▽ More We explore the rheology predicted by a recently proposed constitutive model for jammed suspensions of soft elastic particles derived from particle-level dynamics [Cuny et al., Phys. Rev. Lett. 127, 218003 (2021)]. Our model predicts that the orientation of the anisotropy of the microstructure, governed by an interplay between advection and contact elasticity, plays a key role at yielding and in flow. It generates normal stress differences contributing significantly to the yield criterion and Trouton ratio. It gives rise to non-trivial transients such as stress overshoots in step increases of shear rate, residual stresses after flow cessation and power-law decay of the shear rate in creep. Finally, it explains the collapse of storage modulus as measured in parallel superposition for a yielded suspension. △ Less

Submitted 5 January, 2022; v1 submitted 16 September, 2021; originally announced September 2021.

Comments: 12 pages, 7 figs

Journal ref: Soft Matter, 18, 328-339 (2022)

Absorbing phase transitions in systems with mediated interactions

Authors: Romain Mari, Eric Bertin, Cesare Nardini

Abstract: Experiments of periodically sheared colloidal suspensions or soft amorphous solids display a transition from reversible to irreversible particle motion that, when analysed stroboscopically in time, is interpreted as an absorbing phase transition with infinitely many absorbing states. In these systems interactions mediated by hydrodynamics or elasticity are present, causing passive regions to be af… ▽ More Experiments of periodically sheared colloidal suspensions or soft amorphous solids display a transition from reversible to irreversible particle motion that, when analysed stroboscopically in time, is interpreted as an absorbing phase transition with infinitely many absorbing states. In these systems interactions mediated by hydrodynamics or elasticity are present, causing passive regions to be affected by nearby active ones. We show that mediated interactions induce a new universality class of absorbing phase transitions, distinct from Conserved Directed Percolation, and we obtain the corresponding critical exponents. We do so with large-scale numerical simulations of a minimal model for the stroboscopic dynamics of sheared soft materials and derive the minimal field theoretical description. △ Less

Submitted 31 May, 2021; originally announced May 2021.

Comments: 4 pages, 4 figures

The physics of dense suspensions

Authors: Christopher Ness, Ryohei Seto, Romain Mari

Abstract: Dense suspensions of particles are relevant to many applications and are a key platform for develo** a fundamental physics of out-of-equilibrium systems. They present challenging flow properties, apparently turning from liquid to solid upon small changes in composition or, intriguingly, in the driving forces applied to them. The emergent physics close to the ubiquitous jamming transition (and to… ▽ More Dense suspensions of particles are relevant to many applications and are a key platform for develo** a fundamental physics of out-of-equilibrium systems. They present challenging flow properties, apparently turning from liquid to solid upon small changes in composition or, intriguingly, in the driving forces applied to them. The emergent physics close to the ubiquitous jamming transition (and to some extent the glass and gelation transitions) provides common principles with which to achieve a consistent interpretation of a vast set of phenomena reported in the literature. In light of this, we review the current state of understanding regarding the relation between the physics at the particle scale and the rheology at the macroscopic scale. We further show how this perspective opens new avenues for the development of continuum models for dense suspensions. △ Less

Submitted 10 May, 2021; originally announced May 2021.

Comments: 22 pages, 3 figures, to appear in Annual Review of Condensed Matter Physics

Journal ref: Annual Review of Condensed Matter Physics 13, 97-117 2022

Automatic Stockpile Volume Monitoring using Multi-view Stereo from SkySat Imagery

Authors: Roger Marí, Carlo de Franchis, Enric Meinhardt-Llopis, Gabriele Facciolo

Abstract: This paper proposes a system for automatic surface volume monitoring from time series of SkySat pushframe imagery. A specific challenge of building and comparing large 3D models from SkySat data is to correct inconsistencies between the camera models associated to the multiple views that are necessary to cover the area at a given time, where these camera models are represented as Rational Polynomi… ▽ More This paper proposes a system for automatic surface volume monitoring from time series of SkySat pushframe imagery. A specific challenge of building and comparing large 3D models from SkySat data is to correct inconsistencies between the camera models associated to the multiple views that are necessary to cover the area at a given time, where these camera models are represented as Rational Polynomial Cameras (RPCs). We address the problem by proposing a date-wise RPC refinement, able to handle dynamic areas covered by sets of partially overlap** views. The cameras are refined by means of a rotation that compensates for errors due to inaccurate knowledge of the satellite attitude. The refined RPCs are then used to reconstruct multiple consistent Digital Surface Models (DSMs) from different stereo pairs at each date. RPC refinement strengthens the consistency between the DSMs of each date, which is extremely beneficial to accurately measure volumes in the 3D surface models. The system is tested in a real case scenario, to monitor large coal stockpiles. Our volume estimates are validated with measurements collected on site in the same period of time. △ Less

Submitted 1 March, 2021; originally announced March 2021.

Robust Rational Polynomial Camera Modelling for SAR and Pushbroom Imaging

Authors: Roland Akiki, Roger Marí, Carlo de Franchis, Jean-Michel Morel, Gabriele Facciolo

Abstract: The Rational Polynomial Camera (RPC) model can be used to describe a variety of image acquisition systems in remote sensing, notably optical and Synthetic Aperture Radar (SAR) sensors. RPC functions relate 3D to 2D coordinates and vice versa, regardless of physical sensor specificities, which has made them an essential tool to harness satellite images in a generic way. This article describes a ter… ▽ More The Rational Polynomial Camera (RPC) model can be used to describe a variety of image acquisition systems in remote sensing, notably optical and Synthetic Aperture Radar (SAR) sensors. RPC functions relate 3D to 2D coordinates and vice versa, regardless of physical sensor specificities, which has made them an essential tool to harness satellite images in a generic way. This article describes a terrain-independent algorithm to accurately derive a RPC model from a set of 3D-2D point correspondences based on a regularized least squares fit. The performance of the method is assessed by varying the point correspondences and the size of the area that they cover. We test the algorithm on SAR and optical data, to derive RPCs from physical sensor models or from other RPC models after composition with corrective functions. △ Less

Submitted 26 February, 2021; originally announced February 2021.

Microscopic theory for the rheology of jammed soft suspensions

Authors: Nicolas Cuny, Romain Mari, Eric Bertin

Abstract: We develop a constitutive model allowing for the description of the rheology of two-dimensional soft dense suspensions above jamming. Starting from a statistical description of the particle dynamics, we derive, using a set of approximations, a non-linear tensorial evolution equation linking the deviatoric part of the stress tensor to the strain-rate and vorticity tensors. The coefficients appearin… ▽ More We develop a constitutive model allowing for the description of the rheology of two-dimensional soft dense suspensions above jamming. Starting from a statistical description of the particle dynamics, we derive, using a set of approximations, a non-linear tensorial evolution equation linking the deviatoric part of the stress tensor to the strain-rate and vorticity tensors. The coefficients appearing in this equation can be expressed in terms of the packing fraction and of particle-level parameters. This constitutive equation rooted in the microscopic dynamic qualitatively reproduces a number of salient features of the rheology of jammed soft suspensions, including the presence of yield stresses for the shear component of the stress and for the normal stress difference. More complex protocols like the relaxation after a preshear are also considered, showing a smaller stress after relaxation for a stronger preshear. △ Less

Submitted 22 November, 2021; v1 submitted 11 February, 2021; originally announced February 2021.

Comments: 5 pages, 1 figure

Journal ref: Physical Review Letters 127, 218003 (2021)

Derivation of a constitutive model for the rheology of jammed soft suspensions from particle dynamics

Authors: Nicolas Cuny, Romain Mari, Eric Bertin

Abstract: Considering the rheology of two-dimensional soft suspensions above the jamming density, we derive a tensorial constitutive model from the microscopic particle dynamics. Starting from the equation governing the $N$-particle distribution, we derive an evolution equation for the stress tensor. This evolution equation is not closed, as it involves the pair and three-particle correlation functions. To… ▽ More Considering the rheology of two-dimensional soft suspensions above the jamming density, we derive a tensorial constitutive model from the microscopic particle dynamics. Starting from the equation governing the $N$-particle distribution, we derive an evolution equation for the stress tensor. This evolution equation is not closed, as it involves the pair and three-particle correlation functions. To close this equation, we first employ the standard Kirkwood closure relation to express the three-particle correlation function in terms of the pair correlation function. Then we use a simple and physically motivated parametrization of the pair correlation function to obtain a closed evolution equation for the stress tensor. The latter is naturally expressed as separate evolution equations for the pressure and for the deviatoric part of the stress tensor. These evolution equations provide us with a non-linear tensorial constitutive model describing the rheological response of a jammed soft suspension to an arbitrary uniform deformation. One of the advantages of this microscopically-rooted description is that the coefficients appearing in the constitutive model are known in terms of packing fraction and microscopic parameters. △ Less

Submitted 14 March, 2022; v1 submitted 10 February, 2021; originally announced February 2021.

Comments: 31 pages, 7 figures Final Version after review

Shear thickening of suspensions of dimeric particles

Authors: Romain Mari

Abstract: In this article, I study the shear thickening of suspensions of frictional dimers by the mean of numerical simulations. I report the evolution of the main parameters of shear thickening, such as the jamming volume fractions in the unthickened and thickened branches of the flow curves, as a function of the aspect ratio of the dimers. The explored aspect ratios range from $1$ (spheres) to $2$ (dimer… ▽ More In this article, I study the shear thickening of suspensions of frictional dimers by the mean of numerical simulations. I report the evolution of the main parameters of shear thickening, such as the jamming volume fractions in the unthickened and thickened branches of the flow curves, as a function of the aspect ratio of the dimers. The explored aspect ratios range from $1$ (spheres) to $2$ (dimers made of two kissing spheres). I find a rheology qualitatively similar than the one for suspensions of spheres, except for the first normal stress difference $N_1$, which I systematically find negative for small asphericities. I also investigate the orientational order of the particles under flow. Overall, I find that dense suspensions of dimeric particles share many features with dry granular systems of elongated particles under shear, especially for the frictional state at large applied stresses. For the frictionless state at small stresses, I find that suspensions jam at lower volume fraction than dry systems, and that this difference increases with increasing aspect ratio. Moreover, in this state I find a thus far unobserved alignment of the dimers along the vorticity direction, as opposed to the commonly observed alignment with a direction close to the flow direction. △ Less

Submitted 5 March, 2020; v1 submitted 23 January, 2020; originally announced January 2020.

Comments: 27 pages, 13 figs

Journal ref: Journal of Rheology 64, 239 (2020)

Force transmission and the order parameter of shear thickening

Authors: Romain Mari, Ryohei Seto

Abstract: The origin of the abrupt shear thickening observed in some dense suspensions has been recently argued to be a transition from frictionless (lubricated) to frictional interactions between immersed particles. The Wyart-Cates rheological model, built on this scenario, introduced the concept of fraction of frictional contacts $f$ as the relevant order parameter for the shear thickening transition. Cen… ▽ More The origin of the abrupt shear thickening observed in some dense suspensions has been recently argued to be a transition from frictionless (lubricated) to frictional interactions between immersed particles. The Wyart-Cates rheological model, built on this scenario, introduced the concept of fraction of frictional contacts $f$ as the relevant order parameter for the shear thickening transition. Central to the model is the "equation-of-state" relating $f$ to the applied stress $σ$, which is directly linked to the distribution of the normal components of non-hydrodynamics interparticle forces. Here, we develop a model for this force distribution, based on the so-called $q$-model that we borrow from granular physics. This model explains the known $f(σ)$ in the simple case of sphere contacts displaying only sliding friction, but also predicts strong deviation from this "usual" form when stronger kinds of constraints are applied on relative motion. We verify these predictions in the case of contacts with rolling friction, in particular a broadening of the stress range over which shear thickening occurs. We finally discuss how a similar approach can be followed to predict $f(σ)$ in systems with other variations from the canonical system of monodisperse spheres with sliding friction, in particular the case of large bidispersity. △ Less

Submitted 5 June, 2019; originally announced June 2019.

Comments: 11 pages, 10 figures

Journal ref: Soft Matter, 15, 2019

Constrained maximum likelihood estimation of clusterwise linear regression models with unknown number of components

Authors: R. Di Mari, R. Rocci, S. A. Gattone

Abstract: We consider an equivariant approach imposing data-driven bounds for the variances to avoid singular and spurious solutions in maximum likelihood (ML) estimation of clusterwise linear regression models. We investigate its use in the choice of the number of components and we propose a computational shortcut, which significantly reduces the computational time needed to tune the bounds on the data. In… ▽ More We consider an equivariant approach imposing data-driven bounds for the variances to avoid singular and spurious solutions in maximum likelihood (ML) estimation of clusterwise linear regression models. We investigate its use in the choice of the number of components and we propose a computational shortcut, which significantly reduces the computational time needed to tune the bounds on the data. In the simulation study and the two real-data applications, we show that the proposed methods guarantee a reliable assessment of the number of components compared to standard unconstrained methods, together with accurate model parameters estimation and cluster recovery. △ Less

Submitted 14 April, 2018; originally announced April 2018.

Microscopic origin of frictional rheology in dense suspensions: correlations in force space

Authors: Jetin E. Thomas, Kabir Ramola, Abhinendra Singh, Romain Mari, Jeffrey Morris, Bulbul Chakraborty

Abstract: We develop a statistical framework for the rheology of dense, non-Brownian suspensions, based on correlations in a space representing forces, which is dual to position space. Working with the ensemble of steady state configurations obtained from simulations of suspensions in two dimensions, we find that the anisotropy of the pair correlation function in force space changes with confining shear str… ▽ More We develop a statistical framework for the rheology of dense, non-Brownian suspensions, based on correlations in a space representing forces, which is dual to position space. Working with the ensemble of steady state configurations obtained from simulations of suspensions in two dimensions, we find that the anisotropy of the pair correlation function in force space changes with confining shear stress ($σ_{xy}$) and packing fraction ($φ$). Using these microscopic correlations, we build a statistical theory for the macroscopic friction coefficient: the anisotropy of the stress tensor, $μ= σ_{xy}/P$. We find that $μ$ decreases (i) as $φ$ is increased and (ii) as $σ_{xy}$ is increased. Using a new constitutive relation between $μ$ and viscosity for dense suspensions that generalizes the rate-independent one, we show that our theory predicts a Discontinuous Shear Thickening (DST) flow diagram that is in good agreement with numerical simulations, and the qualitative features of $μ$ that lead to the generic flow diagram of a DST fluid observed in experiments. △ Less

Submitted 22 September, 2018; v1 submitted 9 April, 2018; originally announced April 2018.

Comments: 6 pages, 4 figures, +Supplemental Material

Journal ref: Phys. Rev. Lett. 121, 128002 (2018)

Shaken and stirred: Random organization reduces viscosity and dissipation in granular suspensions

Authors: Christopher Ness, Romain Mari, Michael E Cates

Abstract: The viscosity of suspensions of large ($\geq10{μm}$) particles diverges at high solid fractions due to proliferation of frictional particle contacts. Reducing friction, to allow or improve flowability, is usually achieved by tuning the composition, either changing particle sizes and shapes or by adding lubricating molecules. We present numerical simulations that demonstrate a complementary approac… ▽ More The viscosity of suspensions of large ($\geq10{μm}$) particles diverges at high solid fractions due to proliferation of frictional particle contacts. Reducing friction, to allow or improve flowability, is usually achieved by tuning the composition, either changing particle sizes and shapes or by adding lubricating molecules. We present numerical simulations that demonstrate a complementary approach whereby the viscosity divergence is shifted by driven flow tuning, using superimposed shear oscillations in various configurations to facilitate a primary flow. The oscillations drive the suspension towards an out-of-equilibrium, absorbing state phase transition, where frictional particle contacts that dominate the viscosity are reduced in a self-organizing manner. The method can allow otherwise jammed states to flow; even for unjammed states, it can substantially decrease the energy dissipated per unit strain. This creates a practicable route to flow enhancement across a broad range of suspensions where compositional tuning is undesirable or problematic. △ Less

Submitted 4 April, 2018; originally announced April 2018.

Journal ref: Sci Adv 4 (3), eaar3296 (2018)

Dynamic vorticity banding in discontinuously shear thickening suspensions

Authors: Rahul N. Chacko, Romain Mari, Michael E. Cates, Suzanne M. Fielding

Abstract: It has recently been argued that steady-state vorticity bands cannot arise in shear thickening suspensions, because the normal stress imbalance across the interface between the bands will set up particle migrations. In this Letter, we develop a simple continuum model that couples shear thickening to particle migration. We show by linear stability analysis that homogeneous flow is unstable towards… ▽ More It has recently been argued that steady-state vorticity bands cannot arise in shear thickening suspensions, because the normal stress imbalance across the interface between the bands will set up particle migrations. In this Letter, we develop a simple continuum model that couples shear thickening to particle migration. We show by linear stability analysis that homogeneous flow is unstable towards vorticity banding, as expected, in the regime of negative constitutive slope. In full nonlinear computations, we show however that the resulting vorticity bands are unsteady, with spatiotemporal patterns governed by stress-concentration coupling. We furthermore show that these dynamical bands also arise in direct particle simulations, in good agreement with the continuum model. △ Less

Submitted 25 November, 2018; v1 submitted 28 February, 2018; originally announced February 2018.

Comments: 5 pages, 3 figures. Published in PRL. Copyright transferred to APS

Journal ref: Phys. Rev. Lett. 121, 108003 (2018)

Cluster-weighted latent class modeling

Authors: Roberto Di Mari, Antonio Punzo, Zsuzsa Bakk

Abstract: Usually in Latent Class Analysis (LCA), external predictors are taken to be cluster conditional probability predictors (LC models with covariates), and/or score conditional probability predictors (LC regression models). In such cases, their distribution is not of interest. Class specific distribution is of interest in the distal outcome model, when the distribution of the external variable(s) is a… ▽ More Usually in Latent Class Analysis (LCA), external predictors are taken to be cluster conditional probability predictors (LC models with covariates), and/or score conditional probability predictors (LC regression models). In such cases, their distribution is not of interest. Class specific distribution is of interest in the distal outcome model, when the distribution of the external variable(s) is assumed to dependent on LC membership. In this paper, we consider a more general formulation, typical in cluster-weighted models, which embeds both the latent class regression and the distal outcome models. This allows us to test simultaneously both whether the distribution of the covariate(s) differs across classes, and whether there are significant direct effects of the covariate(s) on the indicators, by including most of the information about the covariate(s) - latent variable relationship. We show the advantages of the proposed modeling approach through a set of population studies and an empirical application on assets ownership of Italian households. △ Less

Submitted 4 January, 2018; originally announced January 2018.

A constitutive model for simple shear of dense frictional suspensions

Authors: Abhinendra Singh, Romain Mari, Morton M. Denn, Jeffrey F. Morris

Abstract: Discrete particle simulations are used to study the shear rheology of dense, stabilized, frictional particulate suspensions in a viscous liquid, toward development of a constitutive model for steady shear flows at arbitrary stress. These suspensions undergo increasingly strong continuous shear thickening (CST) as solid volume fraction $φ$ increases above a critical volume fraction, and discontinuo… ▽ More Discrete particle simulations are used to study the shear rheology of dense, stabilized, frictional particulate suspensions in a viscous liquid, toward development of a constitutive model for steady shear flows at arbitrary stress. These suspensions undergo increasingly strong continuous shear thickening (CST) as solid volume fraction $φ$ increases above a critical volume fraction, and discontinuous shear thickening (DST) is observed for a range of $φ$. When studied at controlled stress, the DST behavior is associated with non-monotonic flow curves of the steady-state stress as a function of shear rate. Recent studies have related shear thickening to a transition between mostly lubricated to predominantly frictional contacts with the increase in stress. In this study, the behavior is simulated over a wide range of the dimensionless parameters $(φ,\tildeσ$, and $μ)$, with $\tildeσ = σ/σ_0$ the dimensionless shear stress and $μ$ the coefficient of interparticle friction: the dimensional stress is $σ$, and $σ_0 \propto F_0/ a^2$, where $F_0$ is the magnitude of repulsive force at contact and $a$ is the particle radius. The data have been used to populate the model of the lubricated-to-frictional rheology of Wyart and Cates [Phys. Rev. Lett.{\bf 112}, 098302 (2014)], which is based on the concept of two viscosity divergences or \textquotedblleft jamming\textquotedblright\ points at volume fraction $φ_{\rm J}^0 = φ_{\rm rcp}$ (random close packing) for the low-stress lubricated state, and at $φ_{\rm J} (μ) < φ_{\rm J}^0$ for any nonzero $μ$ in the frictional state; a generalization provides the normal stress response as well as the shear stress. A flow state map of this material is developed based on the simulation results. △ Less

Submitted 18 August, 2017; originally announced August 2017.

Comments: 12 pages, 10 figures

Shear Reversal in Dense Suspensions: The Challenge to Fabric Evolution Models from Simulation Data

Authors: Rahul N. Chacko, Romain Mari, Suzanne M. Fielding, Michael E. Cates

Abstract: Despite the industrial importance of dense suspensions of hard particles, few constitutive models for them have been proposed or tested. Most of these are effectively "fabric evolution models" (FEMs) based on a stress rule connecting the bulk stress to a rank-2 microstructural fabric tensor Q and a closed time-evolution equation for Q. In dense suspensions most of the stress comes from short-range… ▽ More Despite the industrial importance of dense suspensions of hard particles, few constitutive models for them have been proposed or tested. Most of these are effectively "fabric evolution models" (FEMs) based on a stress rule connecting the bulk stress to a rank-2 microstructural fabric tensor Q and a closed time-evolution equation for Q. In dense suspensions most of the stress comes from short-ranged pairwise steric or lubrication interactions at near-contacts, so a natural choice for Q is the deviatoric 2nd moment of the distribution P(p) of the near-contact orientations p. Here we test directly whether a closed time-evolution equation for such a Q can exist for inertialess non-Brownian hard spheres in a Newtonian solvent. We perform extensive numerical simulations for the evolution of P(p) under shear reversal, providing a stringent test for FEMs. We consider a generic class of these as defined by Hand (1962) constrained only by frame indifference. Motivated by the small microstructural anisotropy in the dense regime, we start with linear models and successively consider increasingly nonlinear ones. Based on these results we suggest that no closed FEM properly describes the dynamics of Q under reversal. We attribute this to the fact that Q gives a poor description of the microstructure during large parts of the microstructural evolution following shear reversal. Specifically, the truncation of P(p) at 2nd spherical harmonic level describes two-lobed distributions of near-contact orientations, whereas on reversal we observe distributions that are markedly four-lobed; moreover dP/dt (p) has oblique axes, not collinear with those of Q in the shear plane. This structure likely precludes any adequate closure at second-rank level. Instead, our numerical data suggest that closures involving the coupled evolution of both a fabric tensor and a fourth-rank tensor might be reasonably accurate. △ Less

Submitted 6 July, 2017; originally announced July 2017.

Comments: 30 pages, 13 Figures

F-term spontaneous breaking of 3D-SUSY an algebro-geometric treatment

Authors: José J. Ramón Marí, Y. M. P. Gomes, J. A. Helayël-Neto

Abstract: We settle a result on generic exactness of SUSY in 3-D, and provide a mechanism of F-term spontaneous breaking of 3-D SUSY, with a different set of tools from those used by O'Raifeartaigh in his seminal work on 4-D SUSY. In our study, we use techniques of projective algebraic geometry so as to deal successfully with cubic hypersurfaces. We settle a result on generic exactness of SUSY in 3-D, and provide a mechanism of F-term spontaneous breaking of 3-D SUSY, with a different set of tools from those used by O'Raifeartaigh in his seminal work on 4-D SUSY. In our study, we use techniques of projective algebraic geometry so as to deal successfully with cubic hypersurfaces. △ Less

Submitted 29 July, 2019; v1 submitted 20 June, 2017; originally announced June 2017.

Comments: Comments are welcome

Shear-induced organization of forces in dense suspensions: signatures of discontinuous shear thickening

Authors: Sumantra Sarkar, Elan Shatoff, Kabir Ramola, Romain Mari, Jeffrey Morris, Bulbul Chakraborty

Abstract: Dense suspensions can exhibit an abrupt change in their viscosity in response to increasing shear rate. The origin of this discontinuous shear thickening (DST) has been ascribed to the transformation of lubricated contacts to frictional, particle-on-particle contacts. Recent research on the flowing and jamming behavior of dense suspensions has explored the intersection of ideas from granular physi… ▽ More Dense suspensions can exhibit an abrupt change in their viscosity in response to increasing shear rate. The origin of this discontinuous shear thickening (DST) has been ascribed to the transformation of lubricated contacts to frictional, particle-on-particle contacts. Recent research on the flowing and jamming behavior of dense suspensions has explored the intersection of ideas from granular physics and Stokesian fluid dynamics to better understand this transition from lubricated to frictional rheology. DST is reminiscent of classical phase transitions, and a key question is how interactions between the microscopic constituents give rise to a macroscopic transition. In this paper, we extend a formalism that has proven to be successful in understanding shear jamming of dry grains to dense suspensions. Quantitative analysis of the collective evolution of the contact-force network accompanying the DST transition demonstrates clear changes in the distribution of microscopic variables, and leads to the identification of an "order parameter" characterizing DST. △ Less

Submitted 16 January, 2017; originally announced January 2017.

Comments: 4 pages. We welcome comments and criticisms

Estimation of clusterwise linear regression models with a shrinkage-like approach

Authors: Roberto Di Mari, Roberto Rocci, Stefano Antonio Gattone

Abstract: Constrained approaches to maximum likelihood estimation in the context of finite mixtures of normals have been presented in the literature. A fully data-dependent constrained method for maximum likelihood estimation of clusterwise linear regression is proposed, which extends previous work in equivariant data-driven estimation of finite mixtures of Gaussians for classification. The method imposes p… ▽ More Constrained approaches to maximum likelihood estimation in the context of finite mixtures of normals have been presented in the literature. A fully data-dependent constrained method for maximum likelihood estimation of clusterwise linear regression is proposed, which extends previous work in equivariant data-driven estimation of finite mixtures of Gaussians for classification. The method imposes plausible bounds on the component variances, based on a target value estimated from the data, which we take to be the homoscedastic variance. Nevertheless, the present work does not only focus on classification recovery, but also on how well model parameters are estimated. In particular, the paper sheds light on the shrinkage-like interpretation of the procedure, where the target is the homoscedastic model: this is not only related to how close to the target the estimated scales are, but extends to the estimated clusterwise linear regressions and classification. We show, based on simulation and real-data based results, that our approach yields a final model being the most appropriate-to-the-data compromise between the heteroscedastic model and the homoscedastic model. △ Less

Submitted 10 November, 2016; originally announced November 2016.

A data driven equivariant approach to constrained Gaussian mixture modeling

Authors: Roberto Rocci, Stefano Antonio Gattone, Roberto Di Mari

Abstract: Maximum likelihood estimation of Gaussian mixture models with different class-specific covariance matrices is known to be problematic. This is due to the unboundedness of the likelihood, together with the presence of spurious maximizers. Existing methods to bypass this obstacle are based on the fact that unboundedness is avoided if the eigenvalues of the covariance matrices are bounded away from z… ▽ More Maximum likelihood estimation of Gaussian mixture models with different class-specific covariance matrices is known to be problematic. This is due to the unboundedness of the likelihood, together with the presence of spurious maximizers. Existing methods to bypass this obstacle are based on the fact that unboundedness is avoided if the eigenvalues of the covariance matrices are bounded away from zero. This can be done imposing some constraints on the covariance matrices, i.e. by incorporating a priori information on the covariance structure of the mixture components. The present work introduces a constrained equivariant approach, where the class conditional covariance matrices are shrunk towards a pre-specified matrix Psi. Data-driven choices of the matrix Psi, when a priori information is not available, and the optimal amount of shrinkage are investigated. The effectiveness of the proposal is evaluated on the basis of a simulation study and an empirical example. △ Less

Submitted 25 October, 2016; v1 submitted 12 September, 2016; originally announced September 2016.

Collective Influence Algorithm to find influencers via optimal percolation in massively large social media

Authors: Flaviano Morone, Byungjoon Min, Lin Bo, Romain Mari, Hernan A. Makse

Abstract: We elaborate on a linear time implementation of the Collective Influence (CI) algorithm introduced by Morone, Makse, Nature 524, 65 (2015) to find the minimal set of influencers in a network via optimal percolation. We show that the computational complexity of CI is O(N log N) when removing nodes one-by-one, with N the number of nodes. This is made possible by using an appropriate data structure t… ▽ More We elaborate on a linear time implementation of the Collective Influence (CI) algorithm introduced by Morone, Makse, Nature 524, 65 (2015) to find the minimal set of influencers in a network via optimal percolation. We show that the computational complexity of CI is O(N log N) when removing nodes one-by-one, with N the number of nodes. This is made possible by using an appropriate data structure to process the CI values, and by the finite radius l of the CI sphere. Furthermore, we introduce a simple extension of CI when l is infinite, the CI propagation (CI_P) algorithm, that considers the global optimization of influence via message passing in the whole network and identifies a slightly smaller fraction of influencers than CI. Remarkably, CI_P is able to reproduce the exact analytical optimal percolation threshold obtained by Bau, Wormald, Random Struct. Alg. 21, 397 (2002) for cubic random regular graphs, leaving little improvement left for random graphs. We also introduce the Collective Immunization Belief Propagation algorithm (CI_BP), a belief-propagation (BP) variant of CI based on optimal immunization, which has the same performance as CI_P. However, this small augmented performance of the order of 1-2 % in the low influencers tail comes at the expense of increasing the computational complexity from O(N log N) to O(N^2 log N), rendering both, CI_P and CI_BP, prohibitive for finding influencers in modern-day big-data. The same nonlinear running time drawback pertains to a recently introduced BP-decimation (BPD) algorithm by Mugisha, Zhou, arXiv:1603.05781. For instance, we show that for big-data social networks of typically 200 million users (eg, active Twitter users sending 500 million tweets per day), CI finds the influencers in less than 3 hours running on a single CPU, while the BP algorithms (CI_P, CI_BP and BDP) would take more than 3,000 years to accomplish the same task. △ Less

Submitted 27 March, 2016; originally announced March 2016.

Comments: 8 pages, 7 figures

Discontinuous Shear Thickening in Brownian Suspensions By Dynamic Simulation

Authors: Romain Mari, Ryohei Seto, Jeffrey F. Morris, Morton M. Denn

Abstract: Dynamic particle-scale numerical simulations are used to show that the shear thickening observed in dense colloidal, or Brownian, suspensions is of a similar nature to that observed in non-colloidal suspensions, i.e., a stress-induced transition from a flow of lubricated near-contacting particles to a flow of a frictionally contacting network of particles. Abrupt (or discontinuous) shear thickenin… ▽ More Dynamic particle-scale numerical simulations are used to show that the shear thickening observed in dense colloidal, or Brownian, suspensions is of a similar nature to that observed in non-colloidal suspensions, i.e., a stress-induced transition from a flow of lubricated near-contacting particles to a flow of a frictionally contacting network of particles. Abrupt (or discontinuous) shear thickening is found to be a geometric rather than hydrodynamic phenomenon; it stems from the strong sensitivity of the jamming volume fraction to the nature of contact forces between suspended particles. The thickening obtained in a colloidal suspension of purely hard frictional spheres is qualitatively similar to experimental observations. However, the agreement cannot be made quantitative with only hydrodynamics, frictional contacts and Brownian forces. Therefore the role of a short-range repulsive potential mimicking the stabilization of actual suspensions on the thickening is studied. The effects of Brownian and repulsive forces on the onset stress can be combined in an additive manner. The simulations including Brownian and stabilizing forces show excellent agreement with experimental data for the viscosity $η$ and the second normal stress difference $N_2$. △ Less

Submitted 3 December, 2015; v1 submitted 5 August, 2015; originally announced August 2015.

Comments: 7 pages, 7 figures. v2: improved text. Accepted in PNAS

Non-monotonic flow curves of shear thickening suspensions

Authors: Romain Mari, Ryohei Seto, Jeffrey F. Morris, Morton M. Denn

Abstract: The discontinuous shear thickening (DST) of dense suspensions is a remarkable phenomenon in which the viscosity can increase by several orders of magnitude at a critical shear rate. It has the appearance of a first order phase transition between two hypothetical "states" that we have recently identified as Stokes flows with lubricated or frictional contacts, respectively. Here we extend the analog… ▽ More The discontinuous shear thickening (DST) of dense suspensions is a remarkable phenomenon in which the viscosity can increase by several orders of magnitude at a critical shear rate. It has the appearance of a first order phase transition between two hypothetical "states" that we have recently identified as Stokes flows with lubricated or frictional contacts, respectively. Here we extend the analogy further by means of novel stress-controlled simulations and show the existence of a non-monotonic steady-state flow curve analogous to a non-monotonic equation of state. While we associate DST with an S-shaped flow curve, at volume fractions above the shear jamming transition the frictional state loses flowability and the flow curve reduces to an arch, permitting the system to flow only at small stresses. Whereas a thermodynamic transition leads to phase separation in the coexistence region, we observe a uniform shear flow all along the thickening transition. A stability analysis suggests that uniform shear may be mechanically stable for the small Reynolds numbers and system sizes in a rheometer. △ Less

Submitted 11 May, 2015; v1 submitted 15 December, 2014; originally announced December 2014.

Comments: v2: typos corrected + various text improvements, 6 pages, 5 figures

Journal ref: Phys. Rev. E 91, 052302 (2015)

Shear thickening, frictionless and frictional rheologies in non-Brownian suspensions

Authors: Romain Mari, Ryohei Seto, Jeffrey F. Morris, Morton M. Denn

Abstract: Particles suspended in a Newtonian fluid raise the viscosity and also generally give rise to a shear-rate dependent rheology. In particular, pronounced shear thickening may be observed at large solid volume fractions. In a recent article (R. Seto, R. Mari, J. F. Morris, and M. M. Denn., Phys. Rev. Lett., 111:218301, 2013) we have considered the minimum set of components to reproduce the experiment… ▽ More Particles suspended in a Newtonian fluid raise the viscosity and also generally give rise to a shear-rate dependent rheology. In particular, pronounced shear thickening may be observed at large solid volume fractions. In a recent article (R. Seto, R. Mari, J. F. Morris, and M. M. Denn., Phys. Rev. Lett., 111:218301, 2013) we have considered the minimum set of components to reproduce the experimentally observed shear thickening behavior, including Discontinuous Shear Thickening (DST). We have found frictional contact forces to be essential, and were able to reproduce the experimental behavior by a simulation including this physical ingredient along with viscous lubrication. In the present article, we thoroughly investigate the effect of friction and express it in the framework of the jamming transition. The viscosity divergence at the jamming transition has been a well known phenomenon in suspension rheology, as reflected in many empirical laws for the viscosity. Friction can affect this divergence, and in particular the jamming packing fraction is reduced if particles are frictional. Within the physical description proposed here, shear thickening is a direct consequence of this effect: as the shear rate increases, friction is increasingly incorporated as more contacts form, leading to a transition from a mostly frictionless to a mostly frictional rheology. This result is significant because it shifts the emphasis from lubrication hydrodynamics and detailed microscopic interactions to geometry and steric constraints close to the jamming transition. △ Less

Submitted 24 September, 2014; v1 submitted 26 March, 2014; originally announced March 2014.

Comments: v4: Journal ref added. 32 pages, 14 figures. -- Supplementary Movies: -- http://youtu.be/awGkYRIi4W8 (Contact network at volume fraction 0.56, and reduced shear rate 0.015) -- http://youtu.be/Y3bCZBo4RlA (Contact network at volume fraction 0.56, and reduced shear rate 0.018) -- http://youtu.be/d9BHreBTQ-o (Flow seen from upstream in the flow direction)

Journal ref: J. Rheol. 58, 1693 (2014)

Cavity method for force transmission in jammed disordered packings of hard particles

Authors: Lin Bo, Romain Mari, Chaoming Song, Hernan A. Makse

Abstract: The force distribution of jammed disordered packings has always been considered a central object in the physics of granular materials. However, many of its features are poorly understood. In particular, analytic relations to other key macroscopic properties of jammed matter, such as the contact network and its coordination number, are still lacking. Here we develop a mean-field theory for this pro… ▽ More The force distribution of jammed disordered packings has always been considered a central object in the physics of granular materials. However, many of its features are poorly understood. In particular, analytic relations to other key macroscopic properties of jammed matter, such as the contact network and its coordination number, are still lacking. Here we develop a mean-field theory for this problem, based on the consideration of the contact network as a random graph where the force transmission becomes a constraint optimization problem. We can thus use the cavity method developed in the last decades within the statistical physics of spin glasses and hard computer science problems. This method allows us to compute the force distribution $\text P(f)$ for random packings of hard particles of any shape, with or without friction. We find a new signature of jamming in the small force behavior $\text P(f) \sim f^θ$, whose exponent has attracted recent active interest: we find a finite value for $\text P(f=0)$, along with $θ=0$. Furthermore, we relate the force distribution to a lower bound of the average coordination number $\, {\bar z}_{\rm c}^{\rm min}(μ)$ of jammed packings of frictional spheres with coefficient $μ$. This bridges the gap between the two known isostatic limits $\, {\bar z}_{\rm c}(μ=0)=2D$ (in dimension $D$) and $\, {\bar z}_{\rm c}(μ\to \infty)=D+1$ by extending the naive Maxwell's counting argument to frictional spheres. The theoretical framework describes different types of systems, such as non-spherical objects in arbitrary dimensions, providing a common mean-field scenario to investigate force transmission, contact networks and coordination numbers of jammed disordered packings. △ Less

Submitted 4 June, 2014; v1 submitted 29 October, 2013; originally announced October 2013.

Journal ref: Soft Matter, 2014, 10 (37), 7379 - 7392

Mean-field theory of random close packings of axisymmetric particles

Authors: Adrian Baule, Romain Mari, Lin Bo, Louis Portal, Hernan A. Makse

Abstract: Finding the optimal random packing of non-spherical particles is an open problem with great significance in a broad range of scientific and engineering fields. So far, this search has been performed only empirically on a case-by-case basis, in particular, for shapes like dimers, spherocylinders and ellipsoids of revolution. Here, we present a mean-field formalism to estimate the packing density of… ▽ More Finding the optimal random packing of non-spherical particles is an open problem with great significance in a broad range of scientific and engineering fields. So far, this search has been performed only empirically on a case-by-case basis, in particular, for shapes like dimers, spherocylinders and ellipsoids of revolution. Here, we present a mean-field formalism to estimate the packing density of axisymmetric non-spherical particles. We derive an analytic continuation from the sphere that provides a phase diagram predicting that, for the same coordination number, the density of monodisperse random packings follows the sequence of increasing packing fractions: spheres < oblate ellipsoids < prolate ellipsoids < dimers < spherocylinders. We find the maximal packing densities of 73.1% for spherocylinders and 70.7% for dimers, in good agreement with the largest densities found in simulations. Moreover, we find a packing density of 73.6% for lens-shaped particles, representing the densest random packing of the axisymmetric objects studied so far. △ Less

Submitted 1 August, 2013; v1 submitted 26 July, 2013; originally announced July 2013.

Comments: Includes supplementary material

Journal ref: Nature Communications 4, 2194 (2013)

Discontinuous Shear Thickening of Frictional Hard-Sphere Suspensions

Authors: Ryohei Seto, Romain Mari, Jeffrey F. Morris, Morton M. Denn

Abstract: Discontinuous shear thickening (DST) observed in many dense athermal suspensions has proven difficult to understand and to reproduce by numerical simulation. By introducing a numerical scheme including both relevant hydrodynamic interactions and granularlike contacts, we show that contact friction is essential for having DST. Above a critical volume fraction, we observe the existence of two states… ▽ More Discontinuous shear thickening (DST) observed in many dense athermal suspensions has proven difficult to understand and to reproduce by numerical simulation. By introducing a numerical scheme including both relevant hydrodynamic interactions and granularlike contacts, we show that contact friction is essential for having DST. Above a critical volume fraction, we observe the existence of two states: a low viscosity, contactless (hence, frictionless) state, and a high viscosity frictional shear jammed state. These two states are separated by a critical shear stress, associated with a critical shear rate where DST occurs. The shear jammed state is reminiscent of the jamming phase of granular matter. Continuous shear thickening is seen as a lower volume fraction vestige of the jamming transition. △ Less

Submitted 5 October, 2013; v1 submitted 25 June, 2013; originally announced June 2013.

Comments: 5 pages, 2 figures, to appear in Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 111, 218301 (2013)

Mechanical response of an inclined frictional granular layer approaching unjamming

Authors: A. P. F. Atman, P. Claudin, G. Combe, R. Mari

Abstract: We present an orthotropic elastic analysis of frictional granular layers under gravity by studying their stress response to a localized overload at the layer surface for several substrate tilt angles. The distance to the unjamming transition is controlled by the tilt angle α with respect to the critical angle α_c. We find that the shear modulus of the system decreases with α, but reaches a finite… ▽ More We present an orthotropic elastic analysis of frictional granular layers under gravity by studying their stress response to a localized overload at the layer surface for several substrate tilt angles. The distance to the unjamming transition is controlled by the tilt angle α with respect to the critical angle α_c. We find that the shear modulus of the system decreases with α, but reaches a finite value as αtends to α_c. We also analyze the vibration modes of the system and show that the soft modes play an increasing, though not crucial, role approaching the transition. △ Less

Submitted 22 January, 2013; v1 submitted 27 March, 2012; originally announced March 2012.

Comments: 6 pages, 5 figures, improved version

Dynamical transition of glasses: from exact to approximate

Authors: Romain Mari, Jorge Kurchan

Abstract: We introduce a family of glassy models having a parameter, playing the role of an interaction range, that may be varied continuously to go from a system of particles in d dimensions to a mean-field version of it. The mean-field limit is exactly described by equations conceptually close, but different from, the Mode-Coupling equations. We obtain these by a dynamic virial construction. Quite surpris… ▽ More We introduce a family of glassy models having a parameter, playing the role of an interaction range, that may be varied continuously to go from a system of particles in d dimensions to a mean-field version of it. The mean-field limit is exactly described by equations conceptually close, but different from, the Mode-Coupling equations. We obtain these by a dynamic virial construction. Quite surprisingly we observe that in three dimensions, the mean-field behavior is closely followed for ranges as small as one interparticle distance, and still qualitatively for smaller distances. For the original particle model, we expect the present mean-field theory to become, unlike the Mode-Coupling equations, an increasingly good approximation at higher dimensions. △ Less

Submitted 18 April, 2011; originally announced April 2011.

Comments: 44 pages, 19 figures

Low energy modes and Debye behaviour in a colloidal crystal

Authors: Antina Ghosh, Romain Mari, V. K. Chikkkadi, Peter Schall, A. C Maggs, Daniel Bonn

Abstract: We study the vibrational spectrum and the low energy modes of a three dimensional colloidal crystal using confocal microscopy. This is done in a two-dimensional cut through a three-dimensional crystal. We find that the observed density of states is incompatible with the standard Debye form in either two or three dimensions. These results are confirmed by numerical simulations. We show that an effe… ▽ More We study the vibrational spectrum and the low energy modes of a three dimensional colloidal crystal using confocal microscopy. This is done in a two-dimensional cut through a three-dimensional crystal. We find that the observed density of states is incompatible with the standard Debye form in either two or three dimensions. These results are confirmed by numerical simulations. We show that an effective theory for the projections of the modes onto the two-dimensional cut describes the experimental and simulation data in a satisfactory way. △ Less

Submitted 21 February, 2011; originally announced February 2011.

Comments: accepted for publication in Physica A

Calculation of the Voronoi boundary for lens-shaped particles and spherocylinders

Authors: Louis Portal, Maximilien Danisch, Adrian Baule, Romain Mari, Hernan A. Makse

Abstract: We have recently developed a mean-field theory to estimate the packing fraction of non-spherical particles [A. Baule et al., Nature Commun. (2013)]. The central quantity in this framework is the Voronoi excluded volume, which generalizes the standard hard-core excluded volume appearing in Onsager's theory. The Voronoi excluded volume is defined from an exclusion condition for the Voronoi boundary… ▽ More We have recently developed a mean-field theory to estimate the packing fraction of non-spherical particles [A. Baule et al., Nature Commun. (2013)]. The central quantity in this framework is the Voronoi excluded volume, which generalizes the standard hard-core excluded volume appearing in Onsager's theory. The Voronoi excluded volume is defined from an exclusion condition for the Voronoi boundary between two particles, which is usually not tractable analytically. Here, we show how the technical difficulties in calculating the Voronoi boundary can be overcome for lens-shaped particles and spherocylinders, two standard prolate and oblate shapes with rotational symmetry. By decomposing these shapes into unions and intersections of spheres analytical expressions can be obtained. △ Less

Submitted 15 November, 2013; v1 submitted 3 February, 2011; originally announced February 2011.

Comments: 19 pages, 8 figures

Journal ref: J. Stat. Mech. (2013) P11009

Low energy modes and Debye behavior in a colloidal crystal

Authors: A. Ghosh, R. Mari, V. K. Chikkadi, P. Schall, A. C. Maggs, D. Bonn

Abstract: withdrawn by the author due to double submission in arXiv:1102.4271 . withdrawn by the author due to double submission in arXiv:1102.4271 . △ Less

Submitted 9 September, 2011; v1 submitted 14 September, 2010; originally announced September 2010.

Comments: 6 pages, 5 figures

Jamming versus Glass Transitions

Authors: R. Mari, F. Krzakala, J. Kurchan

Abstract: Recent ideas based on the properties of assemblies of frictionless particles in mechanical equilibrium provide a perspective of amorphous systems different from that offered by the traditional approach originating in liquid theory. The relation, if any, between these two points of view, and the relevance of the former to the glass phase, has been difficult to ascertain. In this paper we introduc… ▽ More Recent ideas based on the properties of assemblies of frictionless particles in mechanical equilibrium provide a perspective of amorphous systems different from that offered by the traditional approach originating in liquid theory. The relation, if any, between these two points of view, and the relevance of the former to the glass phase, has been difficult to ascertain. In this paper we introduce a model for which both theories apply strictly: it exhibits on the one hand an ideal glass transition and on the other `jamming' features (fragility, soft modes) virtually identical to that of real systems. This allows us to disentangle the different contents and domains of applicability of the two physical phenomena. △ Less

Submitted 20 May, 2009; v1 submitted 23 June, 2008; originally announced June 2008.

Comments: 4 pages, 6 figures Modified content, new figure

Journal ref: Phys. Rev. Lett. 103, 025701 (2009)