Showing 1–7 of 7 results for author: Mannsfeld, S

On-liquid-gallium surface synthesis of ultra-smooth conductive metal-organic framework thin films

Authors: **xin Liu, Yunxu Chen, Xing Huang, Yanhan Ren, Mike Hambsch, David Bodesheim, Darius Pohl, Xiaodong Li, Marielle Deconinck, Bowen Zhang, Markus Löffler, Zhongquan Liao, Fengxiang Zhao, Arezoo Dianat, Gianaurelio Cuniberti, Yana Vaynzof, Junfeng Gao, **gcheng Hao, Stefan C. B. Mannsfeld, Xinliang Feng, Renhao Dong

Abstract: Conductive metal-organic frameworks (MOFs) are emerging electroactive materials for (opto-)electronics. However, it remains a great challenge to achieve reliable MOF-based devices via the existing synthesis methods that are compatible with the complementary metal-oxide-semiconductor technology, as the surface roughness of thus-far synthetic MOF films or pellets is rather high for efficient electro… ▽ More Conductive metal-organic frameworks (MOFs) are emerging electroactive materials for (opto-)electronics. However, it remains a great challenge to achieve reliable MOF-based devices via the existing synthesis methods that are compatible with the complementary metal-oxide-semiconductor technology, as the surface roughness of thus-far synthetic MOF films or pellets is rather high for efficient electrode contact. Here, we develop an on-liquid-gallium surface synthesis (OLGSS) strategy under chemical vapor deposition (CVD) conditions for the controlled growth of two-dimensional conjugated MOF (2D c-MOF) thin films with ten-fold improvement of surface flatness (surface roughness can reach as low as ~2 Å) compared with MOF films grown by the traditional methods. Supported by theoretical modeling, we unveil a layer-by-layer CVD growth mode for constructing flattening surfaces, that is triggered by the high adhesion energy between gallium (Ga) and planar aromatic ligands. We further demonstrate the generality of the as-proposed OLGSS strategy by reproducing such a flat surface over nine different 2D c-MOF films with variable thicknesses (~2 to 208 nm) and large lateral sizes (over 1 cm2). The resultant ultra-smooth 2D c-MOF films enable the formation of high-quality electrical contacts with gold (Au) electrodes, leading to a reduction of contact resistance by over ten orders of magnitude compared to the traditional uneven MOF films. Furthermore, due to the efficient interfacial interaction benifited from the high-quality contacts, the prepared van der Waals heterostructure (vdWH) of OLGSS c-MOF and MoS2 exhibits intriguing photoluminescence (PL) enhancement, PL peak shift and large work function modulation. The establishment of the reliable OLGSS method provides the chances to push the development of MOF electronics and the construction of multicomponent MOF-based heterostructure materials. △ Less

Submitted 17 April, 2024; originally announced April 2024.

Influence of chemical interactions on the electronic properties of BiOI/organic semiconductor heterojunctions for application in solution-processed electronics

Authors: Vaidehi Lapalikar, Preetam Dacha, Mike Hambsch, Yvonne J. Hofstetter, Yana Vaynzof, Stefan C. B. Mannsfeld, Michael Ruck

Abstract: Bismuth oxide iodide (BiOI) has been viewed as a suitable environmentally-friendly alternative to lead-halide perovskites for low-cost (opto-)electronic applications such as photodetectors, phototransistors and sensors. To enable its incorporation in these devices in a convenient, scalable, and economical way, BiOI thin films were investigated as part of heterojunctions with various p-type organic… ▽ More Bismuth oxide iodide (BiOI) has been viewed as a suitable environmentally-friendly alternative to lead-halide perovskites for low-cost (opto-)electronic applications such as photodetectors, phototransistors and sensors. To enable its incorporation in these devices in a convenient, scalable, and economical way, BiOI thin films were investigated as part of heterojunctions with various p-type organic semiconductors (OSCs) and tested in a field-effect transistor (FET) configuration. The hybrid heterojunctions, which combine the respective functionalities of BiOI and the OSCs were processed from solution under ambient atmosphere. The characteristics of each of these hybrid systems were correlated with the physical and chemical properties of the respective materials using a concept based on heteropolar chemical interactions at the interface. Systems suitable for application in lateral transport devices were identified and it was demonstrated how materials in the hybrids interact to provide improved and synergistic properties. These indentified heterojunction FETs are a first instance of successful incorporation of solution-processed BiOI thin films in a three-terminal device. They show a significant threshold voltage shift and retained carrier mobility compared to pristine OSC devices and open up possibilities for future optoelectronic applications. △ Less

Submitted 17 April, 2024; originally announced April 2024.

Band Structure Engineering in Highly Crystalline Organic Semiconductors

Authors: Shu-Jen Wang, Sebastian Hutsch, Felix Talnack, Marielle Deconinck, Shiyu Huang, Zongbao Zhang, Hans Kleemann, Yana Vaynzof, Stefan C. B. Mannsfeld, Frank Ortmann, Karl Leo

Abstract: Blending of semiconductors for controlling the energy levels (band structure engineering) is an important technique, in particular, for optoelectronic applications. The underlying physics is the delocalized Bloch states, which average over the potential landscape of the blend. For organic semiconductors, it has been shown that two quite different effects, the dielectric constant and electrostatic… ▽ More Blending of semiconductors for controlling the energy levels (band structure engineering) is an important technique, in particular, for optoelectronic applications. The underlying physics is the delocalized Bloch states, which average over the potential landscape of the blend. For organic semiconductors, it has been shown that two quite different effects, the dielectric constant and electrostatic interaction between molecules, can be used to tune the energy gap and ionization energy of disordered and weakly crystalline organic semiconductor blends. It is so far not known whether the electronic delocalization in organic crystals with large bandwidths can contribute to the energy structure engineering of the blend in a way similar to that in inorganic semiconductors. Here, we investigate the growth of highly ordered organic thin-film blends with a similar chemical structure and show the effect of band structure engineering by spectroscopic methods. We rationalize the experimental results with comprehensive theoretical simulations, showing that the delocalization is a significant effect. Our work paves the way for engineering the band structure of highly ordered organic semiconductor thin films that can be tailored for the desired optoelectronic device application. △ Less

Submitted 17 April, 2024; originally announced April 2024.

Analysis of the Annealing Budget of Metal Oxide Thin-Film Transistors Prepared by an Aqueous Blade-Coating Process

Authors: Tianyu Tang, Preetam Dacha, Katherina Haase, Joshua Kreß, Christian Hänisch, Jonathan Perez, Yulia Krupskaya, Alexander Tahn, Darius Pohl, Sebastian Schneider, Felix Talnack, Mike Hambsch, Sebastian Reineke, Yana Vaynzof, Stefan C. B. Mannsfeld

Abstract: Metal oxide (MO) semiconductors are widely used in electronic devices due to their high optical transmittance and promising electrical performance. This work describes the advancement toward an eco-friendly, streamlined method for preparing thin-film transistors (TFTs) via a pure water-solution blade-coating process with focus on a low thermal budget. Low temperature and rapid annealing of triple-… ▽ More Metal oxide (MO) semiconductors are widely used in electronic devices due to their high optical transmittance and promising electrical performance. This work describes the advancement toward an eco-friendly, streamlined method for preparing thin-film transistors (TFTs) via a pure water-solution blade-coating process with focus on a low thermal budget. Low temperature and rapid annealing of triple-coated indium oxide thin-film transistors (3C-TFTs) and indium oxide/zinc oxide/indium oxide thin-film transistors (IZI-TFTs) on a 300 nm SiO2 gate dielectric at 300 $^{\circ}$C for only 60 s yields devices with an average field effect mobility of 10.7 and 13.8 cm2/Vs, respectively. The devices show an excellent on/off ratio (>10^6), and a threshold voltage close to 0 V when measured in air. Flexible MO-TFTs on polyimide substrates with AlOx dielectrics fabricated by rapid annealing treatment can achieve a remarkable mobility of over 10 cm2/Vs at low operating voltage. When using a longer post-coating annealing period of 20 min, high-performance 3C-TFTs (over 18 cm2/Vs) and IZI-TFTs (over 38 cm2/Vs) using MO semiconductor layers annealed at 300 $^{\circ}$C are achieved. △ Less

Submitted 17 April, 2024; originally announced April 2024.

Structural Reinforcement in Mechanically Interlocked Two-Dimensional Polymers by Suppressing Interlayer Sliding

Authors: Ye Yang, André Knapp, David Bodesheim, Alexander Croy, Mike Hambsch, Chandrasekhar Naisa, Darius Pohl, Bernd Rellinghaus, Changsheng Zhao, Stefan C. B. Mannsfeld, Gianaurelio Cuniberti, Zhiyong Wang, Renhao Dong, Andreas Fery, Xinliang Feng

Abstract: Preserving the superior mechanical properties of monolayer two-dimensional (2D) materials when transitioning to bilayer and layer-stacked structures poses a great challenge, primarily arising from the weak van der Waals (vdW) forces that facilitate interlayer sliding and decoupling. Here, we discover that mechanically interlocked 2D polymers (2DPs) offer a means for structural reinforcement from m… ▽ More Preserving the superior mechanical properties of monolayer two-dimensional (2D) materials when transitioning to bilayer and layer-stacked structures poses a great challenge, primarily arising from the weak van der Waals (vdW) forces that facilitate interlayer sliding and decoupling. Here, we discover that mechanically interlocked 2D polymers (2DPs) offer a means for structural reinforcement from monolayer to bilayer. Incorporating macrocyclic molecules with one and two cavities into 2DPs backbones enables the precision synthesis of mechanically interlocked monolayer (MI-M2DP) and bilayer (MI-B2DP). Intriguingly, we have observed an exceptionally high effective Young's modulus of 222.4 GPa for MI-B2DP, surpassing those of MI-M2DP (130.1 GPa), vdW-stacked MI-M2DPs (2 MI-M2DP, 8.1 GPa) and other reported multilayer 2DPs. Modeling studies demonstrate the extraordinary effectiveness of mechanically interlocked structures in minimizing interlayer sliding (~0.1 Å) and energy penalty (320 kcal/mol) in MI-B2DP compared to 2 MI-M2DP (~1.2 Å, 550 kcal/mol), thereby suppressing mechanical relaxation and resulting in prominent structural reinforcement. △ Less

Submitted 17 January, 2024; originally announced January 2024.

A Cu3BHT-Graphene van der Waals Heterostructure with Strong Interlayer Coupling

Authors: Zhiyong Wang, Shuai Fu, Wenjie Zhang, Baokun Liang, Tsai Jung Liu, Mike Hambsch, Jonas F. Pöhls, Yufeng Wu, Jianjun Zhang, Tianshu Lan, Xiaodong Li, Haoyuan Qi, Miroslav Polozij, Stefan C. B. Mannsfeld, Ute Kaiser, Mischa Bonn, R. Thomas Weitz, Thomas Heine, Stuart S. P. Parkin, Hai I Wang, Renhao Dong, Xinliang Feng

Abstract: Two dimensional van der Waals heterostructures (2D are of significant interest due to their intriguing physical properties that are critically defined by the constituent monolayers and their interlayer coupling . However, typical inorganic 2 D vdWhs fall into the weakly coupled region, limiting efficient interfacial charge flow crucial for develo** high performance quantum opto electronics. Here… ▽ More Two dimensional van der Waals heterostructures (2D are of significant interest due to their intriguing physical properties that are critically defined by the constituent monolayers and their interlayer coupling . However, typical inorganic 2 D vdWhs fall into the weakly coupled region, limiting efficient interfacial charge flow crucial for develo** high performance quantum opto electronics. Here, we demonstrate strong interlayer coupling in Cu3 BHT (BHT = benzenehexathiol) graphene vdWhs an organic inorganic bilayer characterized by prominent interlayer charge transfer Monolayer Cu3 BHT with a Kagome lattice is synthesized on the water surface and then coupled with graphene to produce a cm2 scale 2D vdWh. Spectroscopic and electrical studies, along with theoretical calculation s show significant hole transfer from monolayer Cu3 BHT to graphene upon contact , being characteristic fingerprints for strong interlayer coupling This study unveils the great potential of integrating highly pi-conjugated 2D coordination polymers (2DCPs) into 2D vdWhs to explor e intriguing physical phenomena. △ Less

Submitted 26 June, 2023; originally announced June 2023.

Structural order promotes efficient separation of delocalized charges at molecular heterojunctions

Authors: Xiangkun Jia, Lorenzo Soprani, Giacomo Londi, Seyed Mehrdad Hosseini, Felix Talnack, Stefan Mannsfeld, Safa Shoaee, Dieter Neher, Sebastian Reineke, Luca Muccioli, Gabriele D'Avino, Koen Vandewal, David Beljonne, Donato Spoltore X. Jia, S. Reineke, L. Soprani, L. Muccioli, G. Londi, D. Beljonne, S. M. Hosseini, S. Shoaee, D. Neher, F. Talnack, S. Mannsfeld, G. D'Avino , et al. (2 additional authors not shown)

Abstract: The energetic landscape at the interface between electron donating and accepting molecular materials favors efficient conversion of intermolecular charge-transfer states (CTS) into free charge carriers in high-performance organic solar cells. Here, we elucidate how interfacial energetics, charge generation and radiative recombination are affected by structural ordering. We experimentally determine… ▽ More The energetic landscape at the interface between electron donating and accepting molecular materials favors efficient conversion of intermolecular charge-transfer states (CTS) into free charge carriers in high-performance organic solar cells. Here, we elucidate how interfacial energetics, charge generation and radiative recombination are affected by structural ordering. We experimentally determine the CTS binding energy of a series of model, small molecule donor-acceptor blends, where the used acceptors (B2PYMPM, B3PYMPM and B4PYMPM) differ only in the nitrogen position of their lateral pyridine rings. We find that the formation of an ordered, face-on molecular packing in B4PYMPM is beneficial to efficient, field-independent charge separation, leading to fill factors over 70% in photovoltaic devices. This is rationalized by a comprehensive computational protocol showing that, compared to the more amorphous and isotropically oriented B2PYMPM, the higher order of the B4PYMPM molecules provides more delocalized CTS. Furthermore, we find no correlation between the quantum efficiency of radiative free charge carrier recombination and the bound or unbound nature of the CTS. This work highlights the importance of structural ordering at donor-acceptor interfaces for efficient free carrier generation and shows that more ordering and less bound CT states do not preclude efficient radiative recombination. △ Less

Submitted 10 November, 2022; originally announced November 2022.