-
Dissipative and dispersive cavity optomechanics with a frequency-dependent mirror
Authors:
Juliette Monsel,
Anastasiia Ciers,
Sushanth Kini Manjeshwar,
Witlef Wieczorek,
Janine Splettstoesser
Abstract:
An optomechanical microcavity can considerably enhance the interaction between light and mechanical motion by confining light to a sub-wavelength volume. However, this comes at the cost of an increased optical loss rate. Therefore, microcavity-based optomechanical systems are placed in the unresolved-sideband regime, preventing sideband-based ground-state cooling. A pathway to reduce optical loss…
▽ More
An optomechanical microcavity can considerably enhance the interaction between light and mechanical motion by confining light to a sub-wavelength volume. However, this comes at the cost of an increased optical loss rate. Therefore, microcavity-based optomechanical systems are placed in the unresolved-sideband regime, preventing sideband-based ground-state cooling. A pathway to reduce optical loss in such systems is to engineer the cavity mirrors, i.e., the optical modes that interact with the mechanical resonator. In our work, we analyze such an optomechanical system, whereby one of the mirrors is strongly frequency-dependent, i.e., a suspended Fano mirror. This optomechanical system consists of two optical modes that couple to the motion of the suspended Fano mirror. We formulate a quantum-coupled-mode description that includes both the standard dispersive optomechanical coupling as well as dissipative coupling. We solve the Langevin equations of the system dynamics in the linear regime showing that ground-state cooling from room temperature can be achieved even if the cavity is per se not in the resolved-sideband regime, but achieves effective sideband resolution through strong optical mode coupling. Importantly, we find that the cavity output spectrum needs to be properly analyzed with respect to the effective laser detuning to infer the phonon occupation of the mechanical resonator. Our work also predicts how to reach the regime of nonlinear quantum optomechanics in a Fano-based microcavity by engineering the properties of the Fano mirror.
△ Less
Submitted 6 March, 2024; v1 submitted 26 November, 2023;
originally announced November 2023.
-
Quasibound states in the continuum in photonic-crystal-based optomechanical microcavities
Authors:
Cindy Péralle,
Sushanth Kini Manjeshwar,
Anastasiia Ciers,
Witlef Wieczorek,
Philippe Tassin
Abstract:
We present a detailed study of mechanically compliant, photonic-crystal-based microcavities featuring a quasi-bound state in the continuum. Such systems have recently been predicted to reduce the optical loss in Fabry-Perot-type optomechanical cavities. However, they require two identical photonic-crystal slabs facing each other, which poses a considerable challenge for experimental implementation…
▽ More
We present a detailed study of mechanically compliant, photonic-crystal-based microcavities featuring a quasi-bound state in the continuum. Such systems have recently been predicted to reduce the optical loss in Fabry-Perot-type optomechanical cavities. However, they require two identical photonic-crystal slabs facing each other, which poses a considerable challenge for experimental implementation. We investigate how such an ideal system can be simplified and still exhibit a quasi-bound state in the continuum. We find that a suspended photonic-crystal slab facing a distributed Bragg reflector realizes an optomechanical system with a quasi-bound state in the continuum. In this system, the radiative cavity loss can be eliminated to the extent that the cavity loss is dominated by dissipative loss originating from material absorption only. These proposed optomechanical cavity designs are predicted to feature optical quality factors in excess of 10^5.
△ Less
Submitted 30 December, 2023; v1 submitted 30 June, 2023;
originally announced June 2023.
-
Integrated microcavity optomechanics with a suspended photonic crystal mirror above a distributed Bragg reflector
Authors:
Sushanth Kini Manjeshwar,
Anastasiia Ciers,
Juliette Monsel,
Hannes Pfeifer,
Cindy Peralle,
Shu Min Wang,
Philippe Tassin,
Witlef Wieczorek
Abstract:
Increasing the interaction between light and mechanical resonators is an ongoing endeavor in the field of cavity optomechanics. Optical microcavities allow for boosting the interaction strength through their strong spatial confinement of the optical field. In this work, we follow this approach by realizing a sub-wavelength-long, free-space optomechanical microcavity on-chip fabricated from an (Al,…
▽ More
Increasing the interaction between light and mechanical resonators is an ongoing endeavor in the field of cavity optomechanics. Optical microcavities allow for boosting the interaction strength through their strong spatial confinement of the optical field. In this work, we follow this approach by realizing a sub-wavelength-long, free-space optomechanical microcavity on-chip fabricated from an (Al,Ga)As heterostructure. A suspended GaAs photonic crystal mirror is acting as a highly reflective mechanical resonator, which together with a distributed Bragg reflector forms an optomechanical microcavity. We demonstrate precise control over the microcavity resonance by change of the photonic crystal parameters. The interplay between the microcavity mode and a guided resonance of the photonic crystal modifies the cavity response and results in a stronger dynamical backaction on the mechanical resonator compared to conventional optomechanical dynamics.
△ Less
Submitted 22 May, 2023;
originally announced May 2023.
-
High-Q trampoline resonators from strained crystalline InGaP for integrated free-space optomechanics
Authors:
Sushanth Kini Manjeshwar,
Anastasiia Ciers,
Fia Hellman,
Jürgen Bläsing,
André Strittmater,
Witlef Wieczorek
Abstract:
Tensile-strained materials have been used to fabricate nano- and micromechanical resonators with ultra-low mechanical dissipation in the kHz to MHz frequency range. These mechanical resonators are of particular interest for force sensing applications and quantum optomechanics at room temperature. Tensile-strained crystalline materials that are compatible with epitaxial growth of heterostructures w…
▽ More
Tensile-strained materials have been used to fabricate nano- and micromechanical resonators with ultra-low mechanical dissipation in the kHz to MHz frequency range. These mechanical resonators are of particular interest for force sensing applications and quantum optomechanics at room temperature. Tensile-strained crystalline materials that are compatible with epitaxial growth of heterostructures would thereby allow realizing monolithic free-space optomechanical devices, which benefit from stability, ultra-small mode volumes, and scalability. In our work, we demonstrate string- and trampoline resonators made from tensile-strained InGaP, which is a crystalline material that can be epitaxially grown on an AlGaAs heterostructure. The strain of the InGaP layer is defined via its Ga content when grown on (Al,Ga)As. In our case, we realize devices with a stress of up to 470\,MPa along the $[1\,1\,0]$ crystal direction. We characterize the mechanical properties of the suspended InGaP devices, such as anisotropic stress, yield strength, and intrinsic quality factor. We find that the latter degrades over time. We reach mechanical quality factors surpassing $10^7$ at room temperature with a $Q\cdot f$-product as high as $7\cdot10^{11}\,$Hz with trampoline-shaped micromechanical resonators, which exploit strain engineering to dilute mechanical dissipation. The large area of the suspended trampoline resonator allows us to pattern a photonic crystal to engineer its out-of-plane reflectivity in the telecom band, which is desired for efficient signal transduction of mechanical motion to light. Stabilization of the intrinsic quality factor together with a further reduction of mechanical dissipation through hierarchical clam** or machine learning-based optimization methods paves the way for integrated free-space quantum optomechanics at room temperature in a crystalline material platform.
△ Less
Submitted 2 July, 2023; v1 submitted 22 November, 2022;
originally announced November 2022.
-
Optomechanical cooling with coherent and squeezed light: the thermodynamic cost of opening the heat valve
Authors:
Juliette Monsel,
Nastaran Dashti,
Sushanth Kini Manjeshwar,
Jakob Eriksson,
Henric Ernbrink,
Ebba Olsson,
Emelie Torneus,
Witlef Wieczorek,
Janine Splettstoesser
Abstract:
Ground-state cooling of mechanical motion by coupling to a driven optical cavity has been demonstrated in various optomechanical systems. In our work, we provide a so far missing thermodynamic performance analysis of optomechanical sideband cooling in terms of a heat valve. As performance quantifiers, we examine not only the lowest reachable effective temperature (phonon number) but also the evacu…
▽ More
Ground-state cooling of mechanical motion by coupling to a driven optical cavity has been demonstrated in various optomechanical systems. In our work, we provide a so far missing thermodynamic performance analysis of optomechanical sideband cooling in terms of a heat valve. As performance quantifiers, we examine not only the lowest reachable effective temperature (phonon number) but also the evacuated-heat flow as an equivalent to the cooling power of a standard refrigerator, as well as appropriate thermodynamic efficiencies, which all can be experimentally inferred from measurements of the cavity output light field. Importantly, in addition to the standard optomechanical setup fed by coherent light, we investigate two recent alternative setups for achieving ground-state cooling: replacing the coherent laser drive by squeezed light or using a cavity with a frequency-dependent (Fano) mirror. We study the dynamics of these setups within and beyond the weak-coupling limit and give concrete examples based on parameters of existing experimental systems. By applying our thermodynamic framework, we gain detailed insights into these three different optomechanical cooling setups, allowing a comprehensive understanding of the thermodynamic mechanisms at play.
△ Less
Submitted 18 May, 2021; v1 submitted 5 March, 2021;
originally announced March 2021.
-
Cavity Optomechanics with Photonic Bound States in the Continuum
Authors:
Jamie M. Fitzgerald,
Sushanth Kini Manjeshwar,
Witlef Wieczorek,
Philippe Tassin
Abstract:
We propose a versatile, free-space cavity optomechanics platform built from two photonic crystal membranes, one of which is freely suspended, and designed to form a microcavity less than one wavelength long. This cavity features a series of photonic bound states in the continuum that, in principle, trap light forever and can be favorably used together with evanescent coupling for realizing various…
▽ More
We propose a versatile, free-space cavity optomechanics platform built from two photonic crystal membranes, one of which is freely suspended, and designed to form a microcavity less than one wavelength long. This cavity features a series of photonic bound states in the continuum that, in principle, trap light forever and can be favorably used together with evanescent coupling for realizing various types of optomechanical couplings, such as linear or quadratic coupling of either dispersive or dissipative type, by tuning the photonic crystal patterning and cavity length. Crucially, this platform allows for a quantum cooperativity exceeding unity in the ultrastrong single-photon coupling regime, surpassing the performance of conventional Fabry-Perot-based cavity optomechanical devices in the non-resolved sideband regime. This conceptually novel platform allows for exploring new regimes of the optomechanical interaction, in particular in the framework of pulsed and single-photon optomechanics.
△ Less
Submitted 15 July, 2020;
originally announced July 2020.
-
Suspended photonic crystal membranes in AlGaAs heterostructures for integrated multi-element optomechanics
Authors:
Sushanth Kini Manjeshwar,
Karim Elkhouly,
Jamie M. Fitzgerald,
Martin Ekman,
Yanchao Zhang,
Fan Zhang,
Shu Min Wang,
Philippe Tassin,
Witlef Wieczorek
Abstract:
We present high-reflectivity mechanical resonators fabricated from AlGaAs heterostructures for use in free-space optical cavities operating in the telecom wavelength regime. The mechanical resonators are fabricated in slabs of GaAs and patterned with a photonic crystal to increase their out-of-plane reflectivity. Characterization of the mechanical modes reveals residual tensile stress in the GaAs…
▽ More
We present high-reflectivity mechanical resonators fabricated from AlGaAs heterostructures for use in free-space optical cavities operating in the telecom wavelength regime. The mechanical resonators are fabricated in slabs of GaAs and patterned with a photonic crystal to increase their out-of-plane reflectivity. Characterization of the mechanical modes reveals residual tensile stress in the GaAs device layer. This stress results in higher mechanical frequencies than in unstressed GaAs and can be used for strain engineering of mechanical dissipation. Simultaneously, we find that the finite waist of the incident optical beam leads to a dip in the reflectance spectrum. This feature originates from coupling to a guided resonance of the photonic crystal, an effect that must be taken into account when designing slabs of finite size. The single- and sub-$\upmu$m-spaced double-layer slabs demonstrated here can be directly fabricated on top of a distributed Bragg reflector mirror in the same material platform. Such a platform opens a route for realizing integrated multi-element cavity optomechanical devices and optomechanical microcavities on chip.
△ Less
Submitted 28 August, 2020; v1 submitted 26 April, 2020;
originally announced April 2020.
