-
Comment on "Spin-orbit coupling induced ultrahigh-harmonic generation from magnetic dynamics" with prescriptions on how to validate scientific software for computational quantum transport
Authors:
Branislav K. Nikolic,
Jalil Varela Manjarres
Abstract:
In a recent paper [Phys. Rev. B {\bf 105}, L180415 (2022)], Ly and Manchon used open source code {\tt TKWANT} for time-dependent computational quantum transport to predict surprising features in the mature field of current pum** by magnetization dynamics in spintronics -- in the presence of spin-orbit (SO) coupling, the pumped charge current oscillates at both the frequency $ω_0$ of magnetizatio…
▽ More
In a recent paper [Phys. Rev. B {\bf 105}, L180415 (2022)], Ly and Manchon used open source code {\tt TKWANT} for time-dependent computational quantum transport to predict surprising features in the mature field of current pum** by magnetization dynamics in spintronics -- in the presence of spin-orbit (SO) coupling, the pumped charge current oscillates at both the frequency $ω_0$ of magnetization precession and high harmonics $N=ω/ω_0$, reaching {\em astonishingly high} cutoff \mbox{$N_\mathrm{max} \simeq 1000$} by increasing the SO coupling. However, results in the paper violate two basic theorems of time-dependent quantum transport: ({\em i}) current response to time-periodic external field {\em must be perfectly periodic} itself in the long time limit for a two-terminal device because its active region is attached to two semi-infinite leads bringing continuous energy spectrum; and ({\em ii}) no DC component of charge current is allowed in the left-right symmetric two-terminal devices, or in asymmetric devices its value cannot be changed by simply increasing the SO coupling. We illustrate these two theorems by using completely different calculations applied to one-dimensional two-terminal devices with either ferromagnetic (for which the device is left-right symmetric) and antiferromagnetic (for the device is left-right asymmetric) active region hosting the Rashba SO coupling. We conclude that harmonics in pumped current in the presence of SO coupling do exist, but their ``ultrahigh'' cutoff is an artifact of either ``bugs'' or inadequate algorithms selected within {\tt TKWANT}. Finally, we suggest strategies for {\em validating} time-dependent quantum transport codes, or selection of algorithms by a user within putatively validated (by developers) code, prior to deploying them to produce research papers.
△ Less
Submitted 20 March, 2023; v1 submitted 13 December, 2022;
originally announced December 2022.
-
High-harmonic generation in spin and charge current pum** at ferromagnetic or antiferromagnetic resonance in the presence of spin-orbit coupling
Authors:
Jalil Varela Manjarres,
Branislav K. Nikolic
Abstract:
One of the cornerstone effects in spintronics is spin pum** by dynamical magnetization that is steadily precessing (around, e.g., the $z$-axis) with frequency $ω_0$, due to absorption of low-power microwaves of frequency $ω_0$ under the resonance conditions and in the absence of any applied bias voltage. The two-decades-old "standard model" of this effect, based on the scattering theory of adiab…
▽ More
One of the cornerstone effects in spintronics is spin pum** by dynamical magnetization that is steadily precessing (around, e.g., the $z$-axis) with frequency $ω_0$, due to absorption of low-power microwaves of frequency $ω_0$ under the resonance conditions and in the absence of any applied bias voltage. The two-decades-old "standard model" of this effect, based on the scattering theory of adiabatic quantum pum**, predicts that component $I^{S_z}$ of spin current vector $\big( I^{S_x}(t),I^{S_y}(t),I^{S_z} \big) \propto ω_0$ is time-independent while $I^{S_x}(t)$ and $I^{S_y}(t)$ oscillate harmonically in time with a single frequency $ω_0$; whereas pumped charge current is zero $I \equiv 0$ in the same adiabatic $\propto ω_0$ limit. Here we employ more general than "standard model" approaches, time-dependent nonequilibrium Green's function (NEGF) and Floquet-NEGF, to predict unforeseen features of spin pum** -- precessing localized magnetic moments within ferromagnetic metal (FM) or antiferromagnetic metal (AFM), whose conduction electrons are exposed to spin-orbit coupling (SOC) of either intrinsic or proximity origin, will pump both spin $I^{S_α}(t)$ and charge $I(t)$ currents. All four of these functions harmonically oscillate in time at both even an odd integer multiples $Nω_0$ of the driving frequency $ω_0$. The cutoff order of such high-harmonics increases with SOC strength, reaching $N_\mathrm{max} \simeq 11$ in the chosen-for-demonstration one-dimensional FM or AFM models. Higher cutoff $N_\mathrm{max} \simeq 25$ can be achieved in realistic two-dimensional (2D) FM models defined on the honeycomb lattice, where we provide prescription on how to realize them using 2D magnets and their heterostructures.
△ Less
Submitted 14 December, 2022; v1 submitted 29 December, 2021;
originally announced December 2021.
-
The large inner Micromegas modules for the Atlas Muon Spectrometer Upgrade: construction, quality control and characterization
Authors:
J. Allard,
M. Anfreville,
N. Andari,
D. Attié,
S. Aune,
H. Bachacou,
F. Balli,
F. Bauer,
J. Bennet,
T. Benoit,
J. Beltramelli,
H. Bervas,
T. Bey,
S. Bouaziz,
M. Boyer,
T. Challey,
T. Chevalérias,
X. Copollani,
J. Costa,
G. Cara,
G. Decock,
F. Deliot,
D. Denysiuk,
D. Desforge,
G. Disset
, et al. (49 additional authors not shown)
Abstract:
The steadily increasing luminosity of the LHC requires an upgrade with high-rate and high-resolution detector technology for the inner end cap of the ATLAS muon spectrometer: the New Small Wheels (NSW). In order to achieve the goal of precision tracking at a hit rate of about 15 kHz/cm$^2$ at the inner radius of the NSW, large area Micromegas quadruplets with 100\,\microns spatial resolution per p…
▽ More
The steadily increasing luminosity of the LHC requires an upgrade with high-rate and high-resolution detector technology for the inner end cap of the ATLAS muon spectrometer: the New Small Wheels (NSW). In order to achieve the goal of precision tracking at a hit rate of about 15 kHz/cm$^2$ at the inner radius of the NSW, large area Micromegas quadruplets with 100\,\microns spatial resolution per plane have been produced. % IRFU, from the CEA research center of Saclay, is responsible for the production and validation of LM1 Micromegas modules. The construction, production, qualification and validation of the largest Micromegas detectors ever built are reported here. Performance results under cosmic muon characterisation will also be discussed.
△ Less
Submitted 28 May, 2021;
originally announced May 2021.
-
VBSCan Thessaloniki 2018 Workshop Summary
Authors:
Riccardo Bellan,
Jakob Beyer,
Carsten Bittrich,
Giacomo Boldrini,
Ilaria Brivio,
Lucrezia Stella Bruni,
Diogo Buarque Franzosi,
Claude Charlot,
Vitaliano Ciulli,
Roberto Covarelli,
Duje Giljanovic,
Giulia Gonella,
Pietro Govoni,
Philippe Gras,
Michele Grossi,
Tim Herrmann,
Jan Kalinowski,
Alexander Karlberg,
Kimmo Kallonen,
Eirini Kasimi,
Aysel Kayis Topaksu,
Borut Kersevan,
Henning Kirschenmann,
Michael Kobel,
Konstantinos Kordas
, et al. (39 additional authors not shown)
Abstract:
This document reports the first year of activity of the VBSCan COST Action network, as summarised by the talks and discussions happened during the VBSCan Thessaloniki 2018 workshop. The VBSCan COST action is aiming at a consistent and coordinated study of vector-boson scattering from the phenomenological and experimental point of view, for the best exploitation of the data that will be delivered b…
▽ More
This document reports the first year of activity of the VBSCan COST Action network, as summarised by the talks and discussions happened during the VBSCan Thessaloniki 2018 workshop. The VBSCan COST action is aiming at a consistent and coordinated study of vector-boson scattering from the phenomenological and experimental point of view, for the best exploitation of the data that will be delivered by existing and future particle colliders.
△ Less
Submitted 26 June, 2019;
originally announced June 2019.
-
Vector boson scattering: Recent experimental and theory developments
Authors:
C. F. Anders,
A. Ballestrero,
J. Balz,
R. Bellan,
B. Biedermann,
C. Bittrich,
S. Braß,
I. Brivio,
L. S. Bruni,
J. Butterworth,
M. Cacciari,
A. Cardini,
C. Charlot,
V. Ciulli,
R. Covarelli,
J. Cuevas,
A. Denner,
L. Di Ciaccio,
S. Dittmaier,
S. Duric,
S. Farrington,
P. Ferrari,
P. Ferreira Silva,
L. Finco,
D. Giljanović
, et al. (89 additional authors not shown)
Abstract:
This document summarises the talks and discussions happened during the VBSCan Split17 workshop, the first general meeting of the VBSCan COST Action network. This collaboration is aiming at a consistent and coordinated study of vector-boson scattering from the phenomenological and experimental point of view, for the best exploitation of the data that will be delivered by existing and future particl…
▽ More
This document summarises the talks and discussions happened during the VBSCan Split17 workshop, the first general meeting of the VBSCan COST Action network. This collaboration is aiming at a consistent and coordinated study of vector-boson scattering from the phenomenological and experimental point of view, for the best exploitation of the data that will be delivered by existing and future particle colliders.
△ Less
Submitted 13 December, 2018; v1 submitted 12 January, 2018;
originally announced January 2018.
-
Performances of Anode-resistive Micromegas for HL-LHC
Authors:
J. Manjarres,
T. Alexopoulos,
D. Attie,
M. Boyer,
J. Derre,
G. Fanourakis,
E. Ferrer-Ribas,
J. Galan,
E. Gazis,
T. Geralis,
A. Giganon,
I. Giomataris,
S. Herlant,
F. Jeanneau,
Ph. Schune,
M. Titov,
G. Tsipolitis
Abstract:
Micromegas technology is a promising candidate to replace Atlas forward muon chambers -tracking and trigger- for future HL-LHC upgrade of the experiment. The increase on background and pile-up event probability requires detector performances which are currently under studies in intensive RD activities.
We studied performances of four different resistive Micromegas detectors with different read-o…
▽ More
Micromegas technology is a promising candidate to replace Atlas forward muon chambers -tracking and trigger- for future HL-LHC upgrade of the experiment. The increase on background and pile-up event probability requires detector performances which are currently under studies in intensive RD activities.
We studied performances of four different resistive Micromegas detectors with different read-out strip pitches. These chambers were tested using \sim120 GeV momentum pions, at H6 CERN-SPS beam line in autumn 2010. For a strip pitch 500 micrometers we measure a resolution of \sim90 micrometers and a efficiency of ~98%. The track angle effect on the efficiency was also studied. Our results show that resistive techniques induce no degradation on the efficiency or resolution, with respect to the standard Micromegas. In some configuration the resistive coating is able to reduce the discharge currents at least by a factor of 100.Micromegas technology is a promising candidate to replace Atlas forward muon chambers -tracking and trigger- for future HL-LHC upgrade of the experiment. The increase on background and pile-up event probability requires detector performances which are currently under studies in intensive RD activities. We studied performances of four different resistive Micromegas detectors with different read-out strip pitches. These chambers were tested using \sim120 GeV momentum pions, at H6 CERN-SPS beam line in autumn 2010. For a strip pitch 500 micrometers we measure a resolution of \sim90 micrometers and a efficiency of \sim98%. The track angle effect on the efficiency was also studied. Our results show that resistive techniques induce no degradation on the efficiency or resolution, with respect to the standard Micromegas. In some configuration the resistive coating is able to reduce the discharge currents at least by a factor of 100.
△ Less
Submitted 6 February, 2012;
originally announced February 2012.
-
Performances and ageing study of resistive-anodes Micromegas detectors for HL-LHC environment
Authors:
F. Jeanneau,
T. Alexopoulos,
D. Attié,
M. Boyer,
J. Derré,
G. Fanourakis,
E. Ferrer-Ribas,
J. Galán,
E. Gazis,
T. Geralis,
A. Giganon,
I. Giomataris,
S. Herlant,
J. Manjarrés,
E. Ntomari,
Ph. Schune,
M. Titov,
G. Tsipolitis
Abstract:
With the tenfold luminosity increase envisaged at the HL-LHC, the background (photons, neutrons, ...) and the event pile-up probability are expected to increase in proportion in the different experiments, especially in the forward regions like, for instance, the muons chambers of the ATLAS detector. Detectors based on the Micromegas principle should be good alternatives for the detector upgrade in…
▽ More
With the tenfold luminosity increase envisaged at the HL-LHC, the background (photons, neutrons, ...) and the event pile-up probability are expected to increase in proportion in the different experiments, especially in the forward regions like, for instance, the muons chambers of the ATLAS detector. Detectors based on the Micromegas principle should be good alternatives for the detector upgrade in the HL-LHC framework because of a good spatial (<100 \mum) and time (few ns) resolutions, high-rate capability, radiation hardness, good robustness and the possibility to build large areas. The aim of this study is to demonstrate that it is possible to reduce the discharge probability and protect the electronics by using a resistive anode plane in a high flux hadrons environment. Several prototypes of 10x10 cm2, with different pitches (0.5 to 2 mm) and different resistive layers have been tested at CERN (pi+@SPS). Several tests have been performed with a telescope at different voltages to assess the performances of the detectors in terms of position resolution and efficiency. The spark behaviour in these conditions has also been evaluated. Resistive coating has been shown to be a successful method to reduce the effect of sparks on the efficiency of micromegas. A good spatial resolution (~80 \mum) can be reached with a resistive strip coating detector of 1mm pitch and a high efficiency (> 98%) can be achieved with resistive-anode micromegas detector. An X-rays irradiation has been also performed, showing no ageing effect after more than 21 days exposure and an integrated charge of almost 1C.
△ Less
Submitted 9 January, 2012;
originally announced January 2012.
-
Aging studies of Micromegas prototypes for the HL-LHC
Authors:
J. Galan,
D. Attie,
J. Derre,
E. Ferrer Ribas,
A. Giganon,
I. Giomataris,
F. Jeanneau,
J. Manjarres,
R. de Oliveira,
P. Schune,
M. Titov,
J. Wotschack
Abstract:
The micromegas technology is a promising candidate to replace the forward muon chambers for the luminosity upgrade of ATLAS. The LHC accelerator luminosity will be five times the nominal one, increasing background and pile-up event probability. This requires detector performances which are currently under study in intensive R&D activities. Aging is one of the key issues for a high-luminosity LHC a…
▽ More
The micromegas technology is a promising candidate to replace the forward muon chambers for the luminosity upgrade of ATLAS. The LHC accelerator luminosity will be five times the nominal one, increasing background and pile-up event probability. This requires detector performances which are currently under study in intensive R&D activities. Aging is one of the key issues for a high-luminosity LHC application. For this reason, we study the properties of resistive micromegas detectors under intense X-ray radiation and under thermal neutrons in different CEA-Saclay facilities. This study is complementary to those already performed using fast neutrons.
△ Less
Submitted 25 November, 2011;
originally announced November 2011.
