-
Full control of superconducting qubits with combined on-chip microwave and flux lines
Authors:
Riccardo Manenti,
Eyob A. Sete,
Angela Q. Chen,
Shobhan Kulshreshtha,
Jen-Hao Yeh,
Feyza Oruc,
Andrew Bestwick,
Mark Field,
Keith Jackson,
Stefano Poletto
Abstract:
As the field of quantum computing progresses to larger-scale devices, multiplexing will be crucial to scale quantum processors. While multiplexed readout is common practice for superconducting devices, relatively little work has been reported about the combination of flux and microwave control lines. Here, we present a method to integrate a microwave line and a flux line into a single "XYZ line".…
▽ More
As the field of quantum computing progresses to larger-scale devices, multiplexing will be crucial to scale quantum processors. While multiplexed readout is common practice for superconducting devices, relatively little work has been reported about the combination of flux and microwave control lines. Here, we present a method to integrate a microwave line and a flux line into a single "XYZ line". This combined control line allows us to perform fast single-qubit gates as well as to deliver flux signals to the qubits. The measured relaxation times of the qubits are comparable to state-of-art devices employing separate control lines. We benchmark the fidelity of single-qubit gates with randomized benchmarking, achieving a fidelity above 99.5%, and we demonstrate that XYZ lines can in principle be used to run parametric entangling gates.
△ Less
Submitted 13 July, 2021;
originally announced July 2021.
-
Parametric-resonance entangling gates with a tunable coupler
Authors:
Eyob A. Sete,
Nicolas Didier,
Angela Q. Chen,
Shobhan Kulshreshtha,
Riccardo Manenti,
Stefano Poletto
Abstract:
High-fidelity parametric gates have been demonstrated with superconducting qubits via rf flux modulation of the qubit frequency. The modulation however leads to renormalization of the bare qubit-qubit coupling, thereby reducing the gate speed. Here, we realize a parametric-resonance gate, which is activated by bringing the average frequency of the modulated qubit in resonance with a static-frequen…
▽ More
High-fidelity parametric gates have been demonstrated with superconducting qubits via rf flux modulation of the qubit frequency. The modulation however leads to renormalization of the bare qubit-qubit coupling, thereby reducing the gate speed. Here, we realize a parametric-resonance gate, which is activated by bringing the average frequency of the modulated qubit in resonance with a static-frequency qubit while approximately retaining the bare qubit-qubit coupling. The activation of parametric-resonance gates does not depend on the frequency of modulation, allowing us to choose the modulation frequencies and avoid frequency collisions. Moreover, we show that this approach is compatible with tunable coupler architectures, which reduce always-on residual couplings. Using these techniques, we demonstrate iSWAP and CZ gates between two qubits coupled via a tunable coupler with average process fidelities as high as $99.3\%$ and $97.9\%$, respectively. The flexibility in activating parametric-resonance gates combined with a tunable coupler architecture provides a pathway for building large-scale quantum computers.
△ Less
Submitted 7 September, 2021; v1 submitted 8 April, 2021;
originally announced April 2021.
-
Floating tunable coupler for scalable quantum computing architectures
Authors:
Eyob A. Sete,
Angela Q. Chen,
Riccardo Manenti,
Shobhan Kulshreshtha,
Stefano Poletto
Abstract:
We propose a floating tunable coupler that does not rely on direct qubit-qubit coupling capacitances to achieve the zero-coupling condition. We show that the polarity of the qubit-coupler couplings can be engineered to offset the otherwise constant qubit-qubit coupling and attain the zero-coupling condition when the coupler frequency is above or below the qubit frequencies. We experimentally demon…
▽ More
We propose a floating tunable coupler that does not rely on direct qubit-qubit coupling capacitances to achieve the zero-coupling condition. We show that the polarity of the qubit-coupler couplings can be engineered to offset the otherwise constant qubit-qubit coupling and attain the zero-coupling condition when the coupler frequency is above or below the qubit frequencies. We experimentally demonstrate these two operating regimes of the tunable coupler by implementing symmetric and asymmetric configurations of the coupler's superconducting pads with respect to the qubits. Such a floating tunable coupler provides flexibility in designing large-scale quantum processors while reducing the always-on residual couplings.
△ Less
Submitted 25 June, 2021; v1 submitted 11 March, 2021;
originally announced March 2021.
-
Manufacturing low dissipation superconducting quantum processors
Authors:
Ani Nersisyan,
Stefano Poletto,
Nasser Alidoust,
Riccardo Manenti,
Russ Renzas,
Cat-Vu Bui,
Kim Vu,
Tyler Whyland,
Yuvraj Mohan,
Eyob A. Sete,
Sam Stanwyck,
Andrew Bestwick,
Matthew Reagor
Abstract:
Enabling applications for solid state quantum technology will require systematically reducing noise, particularly dissipation, in these systems. Yet, when multiple decay channels are present in a system with similar weight, resolution to distinguish relatively small changes is necessary to infer improvements to noise levels. For superconducting qubits, uncontrolled variation of nominal performance…
▽ More
Enabling applications for solid state quantum technology will require systematically reducing noise, particularly dissipation, in these systems. Yet, when multiple decay channels are present in a system with similar weight, resolution to distinguish relatively small changes is necessary to infer improvements to noise levels. For superconducting qubits, uncontrolled variation of nominal performance makes obtaining such resolution challenging. Here, we approach this problem by investigating specific combinations of previously reported fabrication techniques on the quality of 242 thin film superconducting resonators and qubits. Our results quantify the influence of elementary processes on dissipation at key interfaces. We report that an end-to-end optimization of the manufacturing process that integrates multiple small improvements together can produce an average ${\overline{T}_{1}=76\pm13~μ}$s across 24 qubits with the best qubits having ${T_1\geq110~μ}$s. Moreover, our analysis places bounds on energy decay rates for three fabrication-related loss channels present in state-of-the-art superconducting qubits. Understanding dissipation through such systematic analysis may pave the way for lower noise solid state quantum computers.
△ Less
Submitted 23 January, 2019;
originally announced January 2019.
-
Unsupervised Machine Learning on a Hybrid Quantum Computer
Authors:
J. S. Otterbach,
R. Manenti,
N. Alidoust,
A. Bestwick,
M. Block,
B. Bloom,
S. Caldwell,
N. Didier,
E. Schuyler Fried,
S. Hong,
P. Karalekas,
C. B. Osborn,
A. Papageorge,
E. C. Peterson,
G. Prawiroatmodjo,
N. Rubin,
Colm A. Ryan,
D. Scarabelli,
M. Scheer,
E. A. Sete,
P. Sivarajah,
Robert S. Smith,
A. Staley,
N. Tezak,
W. J. Zeng
, et al. (5 additional authors not shown)
Abstract:
Machine learning techniques have led to broad adoption of a statistical model of computing. The statistical distributions natively available on quantum processors are a superset of those available classically. Harnessing this attribute has the potential to accelerate or otherwise improve machine learning relative to purely classical performance. A key challenge toward that goal is learning to hybr…
▽ More
Machine learning techniques have led to broad adoption of a statistical model of computing. The statistical distributions natively available on quantum processors are a superset of those available classically. Harnessing this attribute has the potential to accelerate or otherwise improve machine learning relative to purely classical performance. A key challenge toward that goal is learning to hybridize classical computing resources and traditional learning techniques with the emerging capabilities of general purpose quantum processors. Here, we demonstrate such hybridization by training a 19-qubit gate model processor to solve a clustering problem, a foundational challenge in unsupervised learning. We use the quantum approximate optimization algorithm in conjunction with a gradient-free Bayesian optimization to train the quantum machine. This quantum/classical hybrid algorithm shows robustness to realistic noise, and we find evidence that classical optimization can be used to train around both coherent and incoherent imperfections.
△ Less
Submitted 15 December, 2017;
originally announced December 2017.
-
Demonstration of Universal Parametric Entangling Gates on a Multi-Qubit Lattice
Authors:
M. Reagor,
C. B. Osborn,
N. Tezak,
A. Staley,
G. Prawiroatmodjo,
M. Scheer,
N. Alidoust,
E. A. Sete,
N. Didier,
M. P. da Silva,
E. Acala,
J. Angeles,
A. Bestwick,
M. Block,
B. Bloom,
A. Bradley,
C. Bui,
S. Caldwell,
L. Capelluto,
R. Chilcott,
J. Cordova,
G. Crossman,
M. Curtis,
S. Deshpande,
T. El Bouayadi
, et al. (34 additional authors not shown)
Abstract:
We show that parametric coupling techniques can be used to generate selective entangling interactions for multi-qubit processors. By inducing coherent population exchange between adjacent qubits under frequency modulation, we implement a universal gateset for a linear array of four superconducting qubits. An average process fidelity of $\mathcal{F}=93\%$ is estimated for three two-qubit gates via…
▽ More
We show that parametric coupling techniques can be used to generate selective entangling interactions for multi-qubit processors. By inducing coherent population exchange between adjacent qubits under frequency modulation, we implement a universal gateset for a linear array of four superconducting qubits. An average process fidelity of $\mathcal{F}=93\%$ is estimated for three two-qubit gates via quantum process tomography. We establish the suitability of these techniques for computation by preparing a four-qubit maximally entangled state and comparing the estimated state fidelity against the expected performance of the individual entangling gates. In addition, we prepare an eight-qubit register in all possible bitstring permutations and monitor the fidelity of a two-qubit gate across one pair of these qubits. Across all such permutations, an average fidelity of $\mathcal{F}=91.6\pm2.6\%$ is observed. These results thus offer a path to a scalable architecture with high selectivity and low crosstalk.
△ Less
Submitted 26 February, 2018; v1 submitted 20 June, 2017;
originally announced June 2017.
-
Parametrically Activated Entangling Gates Using Transmon Qubits
Authors:
S. Caldwell,
N. Didier,
C. A. Ryan,
E. A. Sete,
A. Hudson,
P. Karalekas,
R. Manenti,
M. Reagor,
M. P. da Silva,
R. Sinclair,
E. Acala,
N. Alidoust,
J. Angeles,
A. Bestwick,
M. Block,
B. Bloom,
A. Bradley,
C. Bui,
L. Capelluto,
R. Chilcott,
J. Cordova,
G. Crossman,
M. Curtis,
S. Deshpande,
T. El Bouayadi
, et al. (37 additional authors not shown)
Abstract:
We describe and implement a family of entangling gates activated by radio-frequency flux modulation applied to a tunable transmon that is statically coupled to a neighboring transmon. The effect of this modulation is the resonant exchange of photons directly between levels of the two-transmon system, obviating the need for mediating qubits or resonator modes and allowing for the full utilization o…
▽ More
We describe and implement a family of entangling gates activated by radio-frequency flux modulation applied to a tunable transmon that is statically coupled to a neighboring transmon. The effect of this modulation is the resonant exchange of photons directly between levels of the two-transmon system, obviating the need for mediating qubits or resonator modes and allowing for the full utilization of all qubits in a scalable architecture. The resonance condition is selective in both the frequency and amplitude of modulation and thus alleviates frequency crowding. We demonstrate the use of three such resonances to produce entangling gates that enable universal quantum computation: one iSWAP gate and two distinct controlled Z gates. We report interleaved randomized benchmarking results indicating gate error rates of 6% for the iSWAP (duration 135ns) and 9% for the controlled Z gates (durations 175 ns and 270 ns), limited largely by qubit coherence.
△ Less
Submitted 8 December, 2017; v1 submitted 20 June, 2017;
originally announced June 2017.
-
Double-sided coaxial circuit QED with out-of-plane wiring
Authors:
J. Rahamim,
T. Behrle,
M. J. Peterer,
A. Patterson,
P. Spring,
T. Tsunoda,
R. Manenti,
G. Tancredi,
P. J. Leek
Abstract:
Superconducting circuits are well established as a strong candidate platform for the development of quantum computing. In order to advance to a practically useful level, architectures are needed which combine arrays of many qubits with selective qubit control and readout, without compromising on coherence. Here we present a coaxial circuit QED architecture in which qubit and resonator are fabricat…
▽ More
Superconducting circuits are well established as a strong candidate platform for the development of quantum computing. In order to advance to a practically useful level, architectures are needed which combine arrays of many qubits with selective qubit control and readout, without compromising on coherence. Here we present a coaxial circuit QED architecture in which qubit and resonator are fabricated on opposing sides of a single chip, and control and readout wiring are provided by coaxial wiring running perpendicular to the chip plane. We present characterisation measurements of a fabricated device in good agreement with simulated parameters and demonstrating energy relaxation and dephasing times of $T_1 = 4.1\,μ$s and $T_2 = 5.7\,μ$s respectively. The architecture allows for scaling to large arrays of selectively controlled and measured qubits with the advantage of all wiring being out of the plane.
△ Less
Submitted 1 June, 2017; v1 submitted 16 March, 2017;
originally announced March 2017.
-
Circuit quantum acoustodynamics with surface acoustic waves
Authors:
R. Manenti,
A. F. Kockum,
A. Patterson,
T. Behrle,
J. Rahamim,
G. Tancredi,
F. Nori,
P. J. Leek
Abstract:
The experimental investigation of quantum devices incorporating mechanical resonators has opened up new frontiers in the study of quantum mechanics at a macroscopic level$^{1,2}$. Superconducting microwave circuits have proven to be a powerful platform for the realisation of such quantum devices, both in cavity optomechanics$^{3,4}$, and circuit quantum electro-dynamics (QED)$^{5,6}$. While most e…
▽ More
The experimental investigation of quantum devices incorporating mechanical resonators has opened up new frontiers in the study of quantum mechanics at a macroscopic level$^{1,2}$. Superconducting microwave circuits have proven to be a powerful platform for the realisation of such quantum devices, both in cavity optomechanics$^{3,4}$, and circuit quantum electro-dynamics (QED)$^{5,6}$. While most experiments to date have involved localised nanomechanical resonators, it has recently been shown that propagating surface acoustic waves (SAWs) can be piezoelectrically coupled to superconducting qubits$^{7,8}$, and confined in high-quality Fabry-Perot cavities up to microwave frequencies in the quantum regime$^{9}$, indicating the possibility of realising coherent exchange of quantum information between the two systems. Here we present measurements of a device in which a superconducting qubit is embedded in, and interacts with, the acoustic field of a Fabry-Perot SAW cavity on quartz, realising a surface acoustic version of cavity quantum electrodynamics. This quantum acoustodynamics (QAD) architecture may be used to develop new quantum acoustic devices in which quantum information is stored in trapped on-chip surface acoustic wavepackets, and manipulated in ways that are impossible with purely electromagnetic signals, due to the $10^{5}$ times slower speed of travel of the mechanical waves.
△ Less
Submitted 13 March, 2017;
originally announced March 2017.
-
Surface acoustic wave resonators in the quantum regime
Authors:
R. Manenti,
M. J. Peterer,
A. Nersisyan,
E. B. Magnusson,
A. Patterson,
P. J. Leek
Abstract:
We present systematic measurements of the quality factors of surface acoustic wave (SAW) resonators on ST-X quartz in the gigahertz range at a temperature of $10 \, \textrm{mK}$. We demonstrate a internal quality factor $Q_\mathrm{i}$ approaching $0.5$ million at $0.5 \, \textrm{GHz}$ and show that $Q_\mathrm{i}\geq4.0\times10^4$ is achievable up to $4.4 \, \textrm{GHz}$. We show evidence for a po…
▽ More
We present systematic measurements of the quality factors of surface acoustic wave (SAW) resonators on ST-X quartz in the gigahertz range at a temperature of $10 \, \textrm{mK}$. We demonstrate a internal quality factor $Q_\mathrm{i}$ approaching $0.5$ million at $0.5 \, \textrm{GHz}$ and show that $Q_\mathrm{i}\geq4.0\times10^4$ is achievable up to $4.4 \, \textrm{GHz}$. We show evidence for a polynomial dependence of propagation loss on frequency, as well as a weak drive power dependence of $Q_\mathrm{i}$ that saturates at low power, the latter being consistent with coupling to a bath of two-level systems. Our results indicate that SAW resonators are promising devices for integration with superconducting quantum circuits.
△ Less
Submitted 16 October, 2015;
originally announced October 2015.
-
Quantum Acoustics with Surface Acoustic Waves
Authors:
Thomas Aref,
Per Delsing,
Maria K. Ekström,
Anton Frisk Kockum,
Martin V. Gustafsson,
Göran Johansson,
Peter Leek,
Einar Magnusson,
Riccardo Manenti
Abstract:
It has recently been demonstrated that surface acoustic waves (SAWs) can interact with superconducting qubits at the quantum level. SAW resonators in the GHz frequency range have also been found to have low loss at temperatures compatible with superconducting quantum circuits. These advances open up new possibilities to use the phonon degree of freedom to carry quantum information. In this paper,…
▽ More
It has recently been demonstrated that surface acoustic waves (SAWs) can interact with superconducting qubits at the quantum level. SAW resonators in the GHz frequency range have also been found to have low loss at temperatures compatible with superconducting quantum circuits. These advances open up new possibilities to use the phonon degree of freedom to carry quantum information. In this paper, we give a description of the basic SAW components needed to develop quantum circuits, where propagating or localized SAW-phonons are used both to study basic physics and to manipulate quantum information. Using phonons instead of photons offers new possibilities which make these quantum acoustic circuits very interesting. We discuss general considerations for SAW experiments at the quantum level and describe experiments both with SAW resonators and with interaction between SAWs and a qubit. We also discuss several potential future developments.
△ Less
Submitted 4 June, 2015;
originally announced June 2015.
-
Surface acoustic wave devices on bulk ZnO at low temperature
Authors:
Einar B. Magnusson,
Benjamin H. Williams,
Riccardo Manenti,
Moon-Sun Nam,
Ani Nersisyan,
Michael J. Peterer,
Arzhang Ardavan,
Peter J. Leek
Abstract:
Surface acoustic wave (SAW) devices based on thin films of ZnO are a well established technology. However, SAW devices on bulk ZnO crystals are not practical at room temperature due to the significant dam** caused by finite electrical conductivity of the crystal. Here, by operating at low temperatures, we demonstrate effective SAW devices on the (0001) surface of bulk ZnO crystals, including a d…
▽ More
Surface acoustic wave (SAW) devices based on thin films of ZnO are a well established technology. However, SAW devices on bulk ZnO crystals are not practical at room temperature due to the significant dam** caused by finite electrical conductivity of the crystal. Here, by operating at low temperatures, we demonstrate effective SAW devices on the (0001) surface of bulk ZnO crystals, including a delay line operating at SAW wavelengths of λ = 4 and 6 μm and a one-port resonator at a wavelength of λ = 1.6 μm. We find that the SAW velocity is temperature dependent, reaching $v \simeq 2.68$ km/s at 10mK. Our resonator reaches a maximum quality factor of $Q_i \simeq 1.5\times 10^5$, demonstrating that bulk ZnO is highly viable for low temperature SAW applications. The performance of the devices is strongly correlated with the bulk conductivity, which quenches SAW transmission above about 200 K.
△ Less
Submitted 24 February, 2015; v1 submitted 21 November, 2014;
originally announced November 2014.
