-
Fluid fibres in true 3D ferroelectric liquids
Authors:
Alexander Jarosik,
Hajnalka NĂ¡dasi,
Michael Schwidder,
Atsutaka Manabe,
Matthias Bremer,
Melanie Klasen-Memmer,
Alexey Eremin
Abstract:
We demonstrate an exceptional ability of a high-polarisation 3D ferroelectric liquid to form freely-suspended fluid fibres at room temperature. Unlike fluid threads in modulated smectics and columnar phases, where translational order is a prerequisite for forming liquid fibres, recently discovered ferroelectric nematic forms fibres with solely orientational molecular order. Additional stabilisatio…
▽ More
We demonstrate an exceptional ability of a high-polarisation 3D ferroelectric liquid to form freely-suspended fluid fibres at room temperature. Unlike fluid threads in modulated smectics and columnar phases, where translational order is a prerequisite for forming liquid fibres, recently discovered ferroelectric nematic forms fibres with solely orientational molecular order. Additional stabilisation mechanisms based on the polar nature of the mesophase are required for this. We propose a model for such a mechanism and show that these fibres demonstrate an exceptional non-linear optical response and exhibit electric field-driven instabilities.
△ Less
Submitted 8 December, 2023; v1 submitted 23 July, 2023;
originally announced July 2023.
-
Observation of a uniaxial ferroelectric smectic A phase
Authors:
Xi Chen,
Vikina Martinez,
Pierre Nacke,
Eva Korblova,
Atsutaka Manabe,
Melanie Klasen-Memmer,
Guillaume Freychet,
Mikhail Zhernenkov,
Matthew A. Glaser,
Leo Radzihovsky,
Joseph E. Maclennan,
David M. Walba,
Matthias Bremer,
Frank Giesselmann,
Noel A. Clark
Abstract:
We report the smectic $A_F$, a new liquid crystal phase of the ferroelectric nematic realm. The smectic $A_F$ is a phase of small polar, rod-shaped molecules which form two-dimensional fluid layers spaced by approximately the mean molecular length. The phase is uniaxial, with the molecular director, the local average long-axis orientation, normal to the layer planes, and ferroelectric, with a spon…
▽ More
We report the smectic $A_F$, a new liquid crystal phase of the ferroelectric nematic realm. The smectic $A_F$ is a phase of small polar, rod-shaped molecules which form two-dimensional fluid layers spaced by approximately the mean molecular length. The phase is uniaxial, with the molecular director, the local average long-axis orientation, normal to the layer planes, and ferroelectric, with a spontaneous electric polarization parallel to the director. Polarization measurements indicate almost complete polar ordering of the $\sim 10$ Debye longitudinal molecular dipoles, and hysteretic polarization reversal with a coercive field of about $2 \times 10^5$ V/m is observed. The smectic $A_F$ phase appears upon cooling in two binary mixtures of partially fluorinated mesogens: 2N/DIO, exhibiting a nematic ($N$) -- smectic $Z_A$ (Sm$Z_A$) -- ferroelectric nematic ($N_F$) -- smectic $A_F$ (Sm$A_F$) phase sequence; and 7N/DIO, exhibiting an $N$ -- Sm$Z_A$ -- Sm$A_F$ phase sequence. The latter presents an opportunity to study a transition between two smectic phases having orthogonal systems of layers.
△ Less
Submitted 26 June, 2022;
originally announced June 2022.
-
Polarisation-driven magneto-optical and nonlinear-optical behaviour of a room-temperature ferroelectric nematic phase
Authors:
Evangelia Zavvou,
Melanie Klasen-Memmer,
Atsutaka Manabe,
Matthias Bremer,
Alexey Eremin
Abstract:
Nematics with a broken polar symmetry is one of the fascinating recent discoveries in the field of soft matter. High spontaneous polarisation and the fluidity of the ferroelectric nematic $N_{\mathrm{F}}$ phase make such materials attractive for future applications and interesting for fundamental research. Here we explore the polar and mechanical properties of a room-temperature ferroelectric nema…
▽ More
Nematics with a broken polar symmetry is one of the fascinating recent discoveries in the field of soft matter. High spontaneous polarisation and the fluidity of the ferroelectric nematic $N_{\mathrm{F}}$ phase make such materials attractive for future applications and interesting for fundamental research. Here we explore the polar and mechanical properties of a room-temperature ferroelectric nematic and its behaviour in a magnetic field. We show that $N_{\mathrm{F}}$ is much less susceptible to the splay deformation than to the twist. The strong splay rigidity can be attributed to the electrostatic self-interaction of the polarisation avoiding the polarisation splay.
△ Less
Submitted 16 June, 2022;
originally announced June 2022.
-
Probability distribution of substituted Titanium in RT12 (R = Nd, Sm, T = Fe, Co) structures
Authors:
Connor Skelland,
Thomas Ostler,
Samuel Westland,
Richard Evans,
Roy Chantrell,
Masao Yano,
Tetsuya Shoji,
Akira Manabe,
Akira Kato,
Michael Winklhofer,
Gergely Zimanyi,
Johannes Fischbacher,
Thomas Schrefl,
Gino Hrkac
Abstract:
We investigated the atomic fill site probability distributions across supercell structures of RT12-xTi (R=Nd, Sm, T=Fe, Co). We use a combined molecular dynamics and Boltzmann distribution approach to extrapolate the probability distributions for Ti substitution from lower to higher temperatures with an equilibrium condition to assess how temperature affects the predictability of the structures fi…
▽ More
We investigated the atomic fill site probability distributions across supercell structures of RT12-xTi (R=Nd, Sm, T=Fe, Co). We use a combined molecular dynamics and Boltzmann distribution approach to extrapolate the probability distributions for Ti substitution from lower to higher temperatures with an equilibrium condition to assess how temperature affects the predictability of the structures fill path. It was found that the Nd and Sm based Fe systems have the highest filling probability path at lower temperatures but the cohesive energy change due to Ti substitution in Sm and Nd based crystals indicates that a more stable system could be achieved with a combination Co and Fe in the transition metal site.
△ Less
Submitted 16 April, 2018;
originally announced April 2018.
-
On the limits of coercivity in permanent magnets
Authors:
J. Fischbacher,
A. Kovacs,
H. Oezelt,
M. Gusenbauer,
T. Schrefl,
L. Exl,
D. Givord,
N. M. Dempsey,
G. Zimanyi,
M. Winklhofer,
G. Hrkac,
R. Chantrell,
N. Sakuma,
M. Yano,
A. Kato,
T. Shoji,
A. Manabe
Abstract:
The maximum coercivity that can be achieved for a given hard magnetic alloy is estimated by computing the energy barrier for the nucleation of a reversed domain in an idealized microstructure without any structural defects and without any soft magnetic secondary phases. For Sm$_{1-z}$Zr$_z$(Fe$_{1-y}$Co$_y$)$_{12-x}$Ti$_x$ based alloys, which are considered an alternative to Nd$_2$Fe$_{14}$B magne…
▽ More
The maximum coercivity that can be achieved for a given hard magnetic alloy is estimated by computing the energy barrier for the nucleation of a reversed domain in an idealized microstructure without any structural defects and without any soft magnetic secondary phases. For Sm$_{1-z}$Zr$_z$(Fe$_{1-y}$Co$_y$)$_{12-x}$Ti$_x$ based alloys, which are considered an alternative to Nd$_2$Fe$_{14}$B magnets with lower rare-earth content, the coercive field of a small magnetic cube is reduced to 60 percent of the anisotropy field at room temperature and to 50 percent of the anisotropy field at elevated temperature (473K). This decrease of the coercive field is caused by misorientation, demagnetizing fields and thermal fluctuations.
△ Less
Submitted 6 August, 2017;
originally announced August 2017.
-
Conjugate gradient methods in micromagnetics
Authors:
J. Fischbacher,
A. Kovacs,
H. Oezelt,
T. Schrefl,
L. Exl,
J. Fidler,
D. Suess,
N. Sakuma,
M. Yano,
A. Kato,
T. Shoji,
A. Manabe
Abstract:
Conjugate gradient methods for energy minimization in micromagnetics are compared. When the step length in the line search is controlled, conjugate gradient techniques are a fast and reliable way to compute the hysteresis properties of permanent magnets. The method is applied to investigate demagnetizing effects in NdFe12 based permanent magnets. The reduction of the coercive field by demagnetizin…
▽ More
Conjugate gradient methods for energy minimization in micromagnetics are compared. When the step length in the line search is controlled, conjugate gradient techniques are a fast and reliable way to compute the hysteresis properties of permanent magnets. The method is applied to investigate demagnetizing effects in NdFe12 based permanent magnets. The reduction of the coercive field by demagnetizing effects is 1.4 T at 450 K.
△ Less
Submitted 20 January, 2017;
originally announced January 2017.
-
Influence of defect thickness on the angular dependence of coercivity in rare-earth permanent magnets
Authors:
Simon Bance,
Harald Oezelt,
Thomas Schrefl,
Georgeta Ciuta,
Nora M. Dempsey,
Dominique Givord,
Michael Winklhofer,
Gino Hrkac,
Gergely Zimanyi,
Oliver Gutfleisch,
Thomas G. Woodcock,
Tetsuya Shoji,
Masao Yano,
Akira Kato,
Akira Manabe
Abstract:
The coercive field and angular dependence of the coercive field of single-grain Nd$_{2}$Fe$_{14}$B permanent magnets are computed using finite element micromagnetics. It is shown that the thickness of surface defects plays a critical role in determining the reversal process. For small defect thicknesses reversal is heavily driven by nucleation, whereas with increasing defect thickness domain wall…
▽ More
The coercive field and angular dependence of the coercive field of single-grain Nd$_{2}$Fe$_{14}$B permanent magnets are computed using finite element micromagnetics. It is shown that the thickness of surface defects plays a critical role in determining the reversal process. For small defect thicknesses reversal is heavily driven by nucleation, whereas with increasing defect thickness domain wall de-pinning becomes more important. This change results in an observable shift between two well-known behavioral models.
A similar trend is observed in experimental measurements of bulk samples, where a Nd-Cu infiltration process has been used to enhance coercivity by modifying the grain boundaries. When account is taken of the imperfect grain alignment of real magnets, the single-grain computed results appears to closely match experimental behaviour.
△ Less
Submitted 27 March, 2016;
originally announced March 2016.
-
Grain-size dependent demagnetizing factors in permanent magnets
Authors:
Simon Bance,
Bernhard Seebacher,
Thomas Schrefl,
Lukas Exl,
Michael Winklhofer,
Gino Hrkac,
Gergely Zimanyi,
Tetsuya Shoji,
Masao Yano,
Noritsugu Sakuma,
M Ito,
Akira Kato,
Akira Manabe
Abstract:
The coercive field of permanent magnets decreases with increasing grain size. The grain size dependence of coercivity is explained by a size dependent demagnetizing factor. In Dy free Nd$_2$Fe$_{14}$B magnets the size dependent demagnetizing factor ranges from 0.2 for a grain size of 55 nm to 1.22 for a grain size of 8300 nm. The comparison of experimental data with micromagnetic simulations sugge…
▽ More
The coercive field of permanent magnets decreases with increasing grain size. The grain size dependence of coercivity is explained by a size dependent demagnetizing factor. In Dy free Nd$_2$Fe$_{14}$B magnets the size dependent demagnetizing factor ranges from 0.2 for a grain size of 55 nm to 1.22 for a grain size of 8300 nm. The comparison of experimental data with micromagnetic simulations suggests that the grain size dependence of the coercive field in hard magnets is due to the non-uniform magnetostatic field in polyhedral grains.
△ Less
Submitted 27 March, 2016;
originally announced March 2016.
-
Hard magnet coercivity
Authors:
S. Bance,
G. Ciuta,
T. Shoji,
T. Gao,
G. Hrkac,
M. Yano,
A. Manabe,
N. M. Dempsey,
T. Schrefl,
D. Givord
Abstract:
Based on a critical analysis of the experimental coercive properties, general considerations on the reversal mechanisms in RFeB magnets are recalled. By plotting together the experimental parameters obtained in various magnets, common features of the reversal processes are demonstrated. Modeling provides an almost quantitative description of coercivity in these materials and permits connecting the…
▽ More
Based on a critical analysis of the experimental coercive properties, general considerations on the reversal mechanisms in RFeB magnets are recalled. By plotting together the experimental parameters obtained in various magnets, common features of the reversal processes are demonstrated. Modeling provides an almost quantitative description of coercivity in these materials and permits connecting the defect characteristic properties to reversal mechanisms.
△ Less
Submitted 9 February, 2015;
originally announced February 2015.
-
The Physics of the B Factories
Authors:
A. J. Bevan,
B. Golob,
Th. Mannel,
S. Prell,
B. D. Yabsley,
K. Abe,
H. Aihara,
F. Anulli,
N. Arnaud,
T. Aushev,
M. Beneke,
J. Beringer,
F. Bianchi,
I. I. Bigi,
M. Bona,
N. Brambilla,
J. B rodzicka,
P. Chang,
M. J. Charles,
C. H. Cheng,
H. -Y. Cheng,
R. Chistov,
P. Colangelo,
J. P. Coleman,
A. Drutskoy
, et al. (2009 additional authors not shown)
Abstract:
This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C.
Please note that version 3 on the archive is the auxiliary…
▽ More
This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C.
Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026.
△ Less
Submitted 31 October, 2015; v1 submitted 24 June, 2014;
originally announced June 2014.
-
Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics
Authors:
The ATLAS Collaboration,
G. Aad,
E. Abat,
B. Abbott,
J. Abdallah,
A. A. Abdelalim,
A. Abdesselam,
O. Abdinov,
B. Abi,
M. Abolins,
H. Abramowicz,
B. S. Acharya,
D. L. Adams,
T. N. Addy,
C. Adorisio,
P. Adragna,
T. Adye,
J. A. Aguilar-Saavedra,
M. Aharrouche,
S. P. Ahlen,
F. Ahles,
A. Ahmad,
H. Ahmed,
G. Aielli,
T. Akdogan
, et al. (2587 additional authors not shown)
Abstract:
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on…
▽ More
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.
△ Less
Submitted 14 August, 2009; v1 submitted 28 December, 2008;
originally announced January 2009.
-
A data Grid testbed environment in Gigabit WAN with HPSS
Authors:
Atsushi Manabe,
Kohki Ishikawa,
Yoshihiko Itoh,
Setsuya Kawabata,
Tetsuro Mashimo,
Youhei Morita,
Hiroshi Sakamoto,
Takashi Sasaki,
Hiroyuki Sato,
Junichi Tanaka,
Ikuo Ueda,
Yoshiyuki Watase,
Satomi Yamamoto,
Shigeo Yashiro
Abstract:
For data analysis of large-scale experiments such as LHC Atlas and other Japanese high energy and nuclear physics projects, we have constructed a Grid test bed at ICEPP and KEK. These institutes are connected to national scientific gigabit network backbone called SuperSINET. In our test bed, we have installed NorduGrid middleware based on Globus, and connected 120TB HPSS at KEK as a large scale…
▽ More
For data analysis of large-scale experiments such as LHC Atlas and other Japanese high energy and nuclear physics projects, we have constructed a Grid test bed at ICEPP and KEK. These institutes are connected to national scientific gigabit network backbone called SuperSINET. In our test bed, we have installed NorduGrid middleware based on Globus, and connected 120TB HPSS at KEK as a large scale data store. Atlas simulation data at ICEPP has been transferred and accessed using SuperSINET. We have tested various performances and characteristics of HPSS through this high speed WAN. The measurement includes comparison between computing and storage resources are tightly coupled with low latency LAN and long distant WAN.
△ Less
Submitted 3 September, 2003; v1 submitted 12 June, 2003;
originally announced June 2003.