-
Raman Optothermal Technique for Measuring Thermal Conductivity of Graphene and Related Materials
Authors:
Hoda Malekpour,
Alexander A. Balandin
Abstract:
We describe Raman spectroscopy based method of measuring thermal conductivity of thin films, and review significant results achieved with this technique pertinent to graphene and other two-dimensional materials. The optothermal Raman method was instrumental for the discovery of unique heat conduction properties of graphene. In this method, Raman spectroscopy is used to determine the local temperat…
▽ More
We describe Raman spectroscopy based method of measuring thermal conductivity of thin films, and review significant results achieved with this technique pertinent to graphene and other two-dimensional materials. The optothermal Raman method was instrumental for the discovery of unique heat conduction properties of graphene. In this method, Raman spectroscopy is used to determine the local temperature of the sample while the excitation laser is utilized as a heat source. The success of Raman spectroscopy in investigating thermal conductivity of suspended graphene and graphene-based thin films motivated extension of this technique to other materials systems and films.
△ Less
Submitted 26 October, 2017;
originally announced October 2017.
-
Thermal Conductivity of Suspended Graphene with Defects
Authors:
Hoda Malekpour,
Pankaj Ramnani,
Srilok Srinivasan,
Ganesh Balasubramanian,
Denis L. Nika,
Ashok Mulchandani,
Roger Lake,
Alexander A. Balandin
Abstract:
We investigate the thermal conductivity of suspended graphene as a function of the density of defects, ND, introduced in a controllable way. Graphene layers are synthesized using chemical vapor deposition, transferred onto a transmission electron microscopy grid, and suspended over ~7.5-micrometer size square holes. Defects are induced by irradiation of graphene with the low-energy electron beam (…
▽ More
We investigate the thermal conductivity of suspended graphene as a function of the density of defects, ND, introduced in a controllable way. Graphene layers are synthesized using chemical vapor deposition, transferred onto a transmission electron microscopy grid, and suspended over ~7.5-micrometer size square holes. Defects are induced by irradiation of graphene with the low-energy electron beam (20 keV) and quantified by the Raman D-to-G peak intensity ratio. As the defect density changes from 2.0x10^10 cm-2 to 1.8x10^11 cm-2 the thermal conductivity decreases from ~(1.8+/-0.2)x10^3 W/mK to ~(4.0+/-0.2)x10^2 W/mK near room temperature. At higher defect densities, the thermal conductivity reveals an intriguing saturation behavior at a relatively high value of ~400 W/mK. The thermal conductivity dependence on defect density is analyzed using the Boltzmann transport equation and molecular dynamics simulations. The results are important for understanding phonon - point defect scattering in two-dimensional systems and for practical applications of graphene in thermal management.
△ Less
Submitted 16 March, 2016;
originally announced March 2016.
-
Acoustic Phonon Spectrum and Thermal Transport in Nanoporous Alumina Arrays
Authors:
Fariborz Kargar,
Sylvester Ramirez,
Bishwajit Debnath,
Hoda Malekpour,
Roger Lake,
Alexander A. Balandin
Abstract:
We report results of a combined investigation of thermal conductivity and acoustic phonon spectra in nanoporous alumina membranes with the pore diameter decreasing from D=180 nm to 25 nm. The samples with the hexagonally arranged pores were selected to have the same porosity of ~13%. The Brillouin-Mandelstam spectroscopy measurements revealed bulk-like phonon spectrum in the samples with D=180-nm…
▽ More
We report results of a combined investigation of thermal conductivity and acoustic phonon spectra in nanoporous alumina membranes with the pore diameter decreasing from D=180 nm to 25 nm. The samples with the hexagonally arranged pores were selected to have the same porosity of ~13%. The Brillouin-Mandelstam spectroscopy measurements revealed bulk-like phonon spectrum in the samples with D=180-nm pores and spectral features, which were attributed to spatial confinement, in the samples with 25-nm and 40-nm pores. The velocity of the longitudinal acoustic phonons was reduced in the samples with smaller pores. Analysis of the experimental data and calculated phonon dispersion suggests that both phonon-boundary scattering and phonon spatial confinement affect heat conduction in membranes with the feature sizes D<40 nm.
△ Less
Submitted 15 October, 2015;
originally announced October 2015.
-
Anisotropy of Thermal Conductivity of Free-Standing Reduced Graphene Oxide Films Annealed at High Temperature
Authors:
J. D. Renteria,
S. Ramirez,
H. Malekpour,
B. Alonso,
A. Centeno,
A. Zurutuza,
A. I. Cocemasov,
D. L. Nika,
A. A. Balandin
Abstract:
We investigated thermal conductivity of free-standing reduced graphene oxide films subjected to a high-temperature treatment of up to 1000 C. It was found that the high-temperature annealing dramatically increased the in-plane thermal conductivity, K, of the films from 3 W/mK to 61 W/mK at room temperature. The cross-plane thermal conductivity, Kc, revealed an interesting opposite trend of decreas…
▽ More
We investigated thermal conductivity of free-standing reduced graphene oxide films subjected to a high-temperature treatment of up to 1000 C. It was found that the high-temperature annealing dramatically increased the in-plane thermal conductivity, K, of the films from 3 W/mK to 61 W/mK at room temperature. The cross-plane thermal conductivity, Kc, revealed an interesting opposite trend of decreasing to a very small value of 0.09 W/mK in the reduced graphene oxide films annealed at 1000 C. The obtained films demonstrated an exceptionally strong anisotropy of the thermal conductivity, K/Kc ~ 675, which is substantially larger even than in the high-quality graphite. The electrical resistivity of the annealed films reduced to 1 - 19 Ohms/sq. The observed modifications of the in-plane and cross-plane thermal conductivity components resulting in an unusual K/Kc anisotropy were explained theoretically. The theoretical analysis suggests that K can reach as high as ~500 W/mK with the increase in the sp2 domain size and further reduction of the oxygen content. The strongly anisotropic heat conduction properties of these films can be useful for applications in thermal management.
△ Less
Submitted 24 March, 2015;
originally announced March 2015.
-
Thermal Conductivity of Graphene Laminate: Making Plastic Thermally Conductive
Authors:
H. Malekpour,
K. -H. Chang,
J. -C. Chen,
C. -Y. Lu,
D. L. Nika,
K. S. Novoselov,
A. A. Balandin
Abstract:
We have investigated thermal conductivity of graphene laminate films deposited on polyethylene terephthalate substrates. Two types of graphene laminate were studied - as deposited and compressed - in order to determine the physical parameters affecting the heat conduction the most. The measurements were performed using the optothermal Raman technique and a set of suspended samples with the graphen…
▽ More
We have investigated thermal conductivity of graphene laminate films deposited on polyethylene terephthalate substrates. Two types of graphene laminate were studied - as deposited and compressed - in order to determine the physical parameters affecting the heat conduction the most. The measurements were performed using the optothermal Raman technique and a set of suspended samples with the graphene laminate thickness from 9 to 44 micrometers. The thermal conductivity of graphene laminate was found to be in the range from 40 W/mK to 90 W/mK at room temperature. It was found unexpectedly that the average size and the alignment of graphene flakes are more important parameters defining the heat conduction than the mass density of the graphene laminate. The thermal conductivity scales up linearly with the average graphene flake size in both uncompressed and compressed laminates. The compressed laminates have higher thermal conductivity for the same average flake size owing to better flake alignment. The possibility of up to 600X enhancement of the thermal conductivity of plastic materials by coating them with the thin graphene laminate films has important practical implications.
△ Less
Submitted 5 July, 2014;
originally announced July 2014.
